hw/usb: Remove MUSB USB host controller

Remove the MUSB USB2.0 OTG-compliant USB host controller
device model. This was only used by the tusb6010 USB
controller in the n800/n810 machines.

Signed-of

hw/usb: Remove MUSB USB host controller

Remove the MUSB USB2.0 OTG-compliant USB host controller
device model. This was only used by the tusb6010 USB
controller in the n800/n810 machines.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-35-peter.maydell@linaro.org

show more ...

hw/usb: Remove tusb6010 USB controller

The tusb6010 was only used by the n800/n810 machines, so it
can be removed now.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Hu

hw/usb: Remove tusb6010 USB controller

The tusb6010 was only used by the n800/n810 machines, so it
can be removed now.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-34-peter.maydell@linaro.org

show more ...

usb: add config options for the hub and hid devices

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.or

usb: add config options for the hub and hid devices

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240530112718.1752905-3-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

hw/usb: extract sysbus-ohci to a separate file

Split the sysbus version to a separate file so that it is not
included in PCI-only machines, and adjust Kconfig for machines
that do need sysbus-ohci.

hw/usb: extract sysbus-ohci to a separate file

Split the sysbus version to a separate file so that it is not
included in PCI-only machines, and adjust Kconfig for machines
that do need sysbus-ohci. The copyrights are based on the
time and employer of balrog and Paul Brook's contributions.

While adjusting the SM501 dependency, move it to the right place
instead of keeping it in the R4D machine.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-10-pbonzini@redhat.com>
[PMD: Rename some functions using 'ohci_sysbus_' prefix]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

kconfig: Add PCIe devices to s390x machines

It is useful to extend the number of available PCIe devices to KVM guests
for passthrough scenarios and also to expose these models to a different
(big en

kconfig: Add PCIe devices to s390x machines

It is useful to extend the number of available PCIe devices to KVM guests
for passthrough scenarios and also to expose these models to a different
(big endian) architecture. Introduce a new config PCIE_DEVICES to select
models, Intel Ethernet adapters and one USB controller. These devices all
support MSI-X which is a requirement on s390x as legacy INTx are not
supported.

Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20230712080146.839113-1-clg@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

hw/arm: Select XLNX_USB_SUBSYS for xlnx-zcu102 machine

This machine hardcodes initialization of the USB device, so select the
corresponding Kconfig. It is not enough to have it as "default y if
XLNX

hw/arm: Select XLNX_USB_SUBSYS for xlnx-zcu102 machine

This machine hardcodes initialization of the USB device, so select the
corresponding Kconfig. It is not enough to have it as "default y if
XLNX_VERSAL" at usb/Kconfig because building --without-default-devices
disables the default selection resulting in:

$ ./qemu-system-aarch64 -M xlnx-zcu102
qemu-system-aarch64: missing object type 'usb_dwc3'
Aborted (core dumped)

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230208192654.8854-8-farosas@suse.de>
Message-Id: <20230503091244.1450613-8-alex.bennee@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/arm: Select XLNX_USB_SUBSYS for xlnx-zcu102 machine

This machine hardcodes initialization of the USB device, so select the
corresponding Kconfig. It is not enough to have it as "default y if
XLNX

hw/arm: Select XLNX_USB_SUBSYS for xlnx-zcu102 machine

This machine hardcodes initialization of the USB device, so select the
corresponding Kconfig. It is not enough to have it as "default y if
XLNX_VERSAL" at usb/Kconfig because building --without-default-devices
disables the default selection resulting in:

$ ./qemu-system-aarch64 -M xlnx-zcu102
qemu-system-aarch64: missing object type 'usb_dwc3'
Aborted (core dumped)

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230208192654.8854-8-farosas@suse.de>
Message-Id: <20230503091244.1450613-8-alex.bennee@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

meson: Add CanoKey

Signed-off-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Message-Id: <YoY6YRD6cxH21mms@Sun>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

usb/storage: add kconfig symbols

Add new kconfig symbols so usb-storage and usb-bot can
be enabled or disabled individually at build time.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-I

usb/storage: add kconfig symbols

Add new kconfig symbols so usb-storage and usb-bot can
be enabled or disabled individually at build time.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210312090425.772900-5-kraxel@redhat.com>

show more ...

usb: xlnx-usb-subsystem: Add xilinx usb subsystem

This model is a top level integration wrapper for hcd-dwc3 and
versal-usb2-ctrl-regs modules, this is used by xilinx versal soc's and
future xilinx

usb: xlnx-usb-subsystem: Add xilinx usb subsystem

This model is a top level integration wrapper for hcd-dwc3 and
versal-usb2-ctrl-regs modules, this is used by xilinx versal soc's and
future xilinx usb subsystems would also be part of it.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1607023357-5096-4-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

usb: Add DWC3 model

This patch adds skeleton model of dwc3 usb controller attached to
xhci-sysbus device. It defines global register space of DWC3 controller,
global registers control the AXI/AHB in

usb: Add DWC3 model

This patch adds skeleton model of dwc3 usb controller attached to
xhci-sysbus device. It defines global register space of DWC3 controller,
global registers control the AXI/AHB interfaces properties, external FIFO
support and event count support. All of which are unimplemented at
present,we are only supporting core reset and read of ID register.

Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1607023357-5096-3-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

usb: fix kconfig for usb-xhci-sysbus

Remove the "default y" for USB_XHCI_SYSBUS because
sysbus devices are not user creatable; boards that use them will
specify them manually with "imply" or "select

usb: fix kconfig for usb-xhci-sysbus

Remove the "default y" for USB_XHCI_SYSBUS because
sysbus devices are not user creatable; boards that use them will
specify them manually with "imply" or "select" clauses.

It would be nice to keep the ability to remove PCIe and USB from microvm,
since thos can be disabled on the command line and therefore should not
be included if QEMU is configured --without-default-devices. However
it's too late for 5.2 to figure out a place for the DSDT creation code.

Reported-by: Bruce Rogers <brogers@suse.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

hw/usb/Kconfig: Fix USB_XHCI_NEC (depends on USB_XHCI_PCI)

Since commit 755fba11fbc and 8ddab8dd3d8 we can not build
USB_XHCI_NEC without USB_XHCI_PCI. Correct the Kconfig
dependency.

Fixes: 755fba

hw/usb/Kconfig: Fix USB_XHCI_NEC (depends on USB_XHCI_PCI)

Since commit 755fba11fbc and 8ddab8dd3d8 we can not build
USB_XHCI_NEC without USB_XHCI_PCI. Correct the Kconfig
dependency.

Fixes: 755fba11fbc ("usb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c")
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201109135300.2592982-2-philmd@redhat.com

[ kraxel: restore "default y if PCI_DEVICES" because
"qemu-system-ppc64 -M pseries,usb=on" needs USB_XHCI_NEC=y ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

usb/xhci: fixup xhci kconfig deps

USB_XHCI does not depend on PCI any more.
USB_XHCI_SYSBUS must select USB_XHCI not USB.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sai Pavan Bod

usb/xhci: fixup xhci kconfig deps

USB_XHCI does not depend on PCI any more.
USB_XHCI_SYSBUS must select USB_XHCI not USB.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 20201020074844.5304-5-kraxel@redhat.com

show more ...

usb: hcd-xhci-sysbus: Attach xhci to sysbus device

Use XHCI as sysbus device, add memory region property to get the
address space instance for dma read/write.

Signed-off-by: Sai Pavan Boddu <sai.pa

usb: hcd-xhci-sysbus: Attach xhci to sysbus device

Use XHCI as sysbus device, add memory region property to get the
address space instance for dma read/write.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-5-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

usb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c

Move pci specific devices to new file. This set the environment to move all
pci specific hooks in hcd-xhci.c to hcd-xhci-pci.c.

Signed-off-by:

usb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c

Move pci specific devices to new file. This set the environment to move all
pci specific hooks in hcd-xhci.c to hcd-xhci-pci.c.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-3-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

meson: Add U2F key to meson

Signed-off-by: César Belley <cesar.belley@lse.epita.fr>
Message-id: 20200826114209.28821-8-cesar.belley@lse.epita.fr

[ fixes suggested by paolo ]

Signed-off-by: Gerd Ho

meson: Add U2F key to meson

Signed-off-by: César Belley <cesar.belley@lse.epita.fr>
Message-id: 20200826114209.28821-8-cesar.belley@lse.epita.fr

[ fixes suggested by paolo ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

hw: Only compile the usb-dwc2 controller if it is really needed

The USB_DWC2 switch is currently "default y", so it is included in all
qemu-system-* builds, even if it is not needed. Even worse, it

hw: Only compile the usb-dwc2 controller if it is really needed

The USB_DWC2 switch is currently "default y", so it is included in all
qemu-system-* builds, even if it is not needed. Even worse, it does a
"select USB", so USB devices are now showing up as available on targets
that do not support USB at all. This sysbus device should only be
included by the boards that need it, i.e. by the Raspi machines.

Fixes: 153ef1662c ("dwc-hsotg (dwc2) USB host controller emulation")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200722154719.10130-1-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

dwc-hsotg (dwc2) USB host controller emulation

Add the dwc-hsotg (dwc2) USB host controller emulation code.
Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c.

Note that to use this with the dwc-otg

dwc-hsotg (dwc2) USB host controller emulation

Add the dwc-hsotg (dwc2) USB host controller emulation code.
Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c.

Note that to use this with the dwc-otg driver in the Raspbian
kernel, you must pass the option "dwc_otg.fiq_fsm_enable=0" on
the kernel command line.

Emulation of slave mode and of descriptor-DMA mode has not been
implemented yet. These modes are seldom used.

I have used some on-line sources of information while developing
this emulation, including:

http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf
which has a pretty complete description of the controller starting
on page 370.

https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf
which has a description of the controller registers starting on
page 130.

Thanks to Felippe Mathieu-Daude for providing a cleaner method
of implementing the memory regions for the controller registers.

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-5-pauldzim@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/usb: Add basic i.MX USB Phy support

Add basic USB PHY support as implemented in i.MX23, i.MX28, i.MX6,
and i.MX7 SoCs.

The only support really needed - at least to boot Linux - is support
for so

hw/usb: Add basic i.MX USB Phy support

Add basic USB PHY support as implemented in i.MX23, i.MX28, i.MX6,
and i.MX7 SoCs.

The only support really needed - at least to boot Linux - is support
for soft reset, which needs to reset various registers to their initial
value. Otherwise, just record register values.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200313014551.12554-2-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/usb: Remove the USB bluetooth dongle device

We are going to remove the bluetooth backend, so the USB bluetooth
dongle can not work anymore. It's a completely optional device, no
board depends on

hw/usb: Remove the USB bluetooth dongle device

We are going to remove the bluetooth backend, so the USB bluetooth
dongle can not work anymore. It's a completely optional device, no
board depends on it, so let's simply remove it now.

Message-Id: <20191120091014.16883-3-thuth@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

hw/usb/Kconfig: USB_XHCI_NEC requires USB_XHCI

TYPE_NEC_XHCI is child of TYPE_XHCI. Add the missing Kconfig
dependency.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paol

hw/usb/Kconfig: USB_XHCI_NEC requires USB_XHCI

TYPE_NEC_XHCI is child of TYPE_XHCI. Add the missing Kconfig
dependency.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

hw/usb/Kconfig: Add CONFIG_USB_EHCI_PCI

The USB_EHCI entry currently include PCI code. Since the EHCI
implementation is already split in sysbus/PCI, add a new
USB_EHCI_PCI. There are no logical chan

hw/usb/Kconfig: Add CONFIG_USB_EHCI_PCI

The USB_EHCI entry currently include PCI code. Since the EHCI
implementation is already split in sysbus/PCI, add a new
USB_EHCI_PCI. There are no logical changes, but the Kconfig
dependencies tree is cleaner.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

hw/usb/hcd-ohci: Move PCI-related code into a separate file

Some machines (like the pxa2xx-based ARM machines) only have a sysbus
OHCI controller, but no PCI. With the new Kconfig-style build system

hw/usb/hcd-ohci: Move PCI-related code into a separate file

Some machines (like the pxa2xx-based ARM machines) only have a sysbus
OHCI controller, but no PCI. With the new Kconfig-style build system,
it will soon be possible to create QEMU binaries that only contain
such PCI-less machines. However, the two OHCI controllers, for sysbus
and for PCI, are currently both located in one file, so the PCI code
is still required for linking here. Move the OHCI-PCI device code
into a separate file, so that it is possible to use the sysbus OHCI
device also without the PCI dependency.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190419075625.24251-3-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

scsi: express dependencies with Kconfig

This automatically removes the SCSI subsystem from the
binary altogether if no controllers are selected.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
S

scsi: express dependencies with Kconfig

This automatically removes the SCSI subsystem from the
binary altogether if no controllers are selected.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-34-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...