linux-user: Move tswap_siginfo out of target code

Move tswap_siginfo from target code to handle_pending_signal. This will
allow some cleanups and having the siginfo ready to be used in gdbstub.

Sig

linux-user: Move tswap_siginfo out of target code

Move tswap_siginfo from target code to handle_pending_signal. This will
allow some cleanups and having the siginfo ready to be used in gdbstub.

Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240309030901.1726211-3-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

show more ...

linux-user: Move tswap_siginfo out of target code

Move tswap_siginfo from target code to handle_pending_signal. This will
allow some cleanups and having the siginfo ready to be used in gdbstub.

Sig

linux-user: Move tswap_siginfo out of target code

Move tswap_siginfo from target code to handle_pending_signal. This will
allow some cleanups and having the siginfo ready to be used in gdbstub.

Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240309030901.1726211-3-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

show more ...

linux-user: Move tswap_siginfo out of target code

Move tswap_siginfo from target code to handle_pending_signal. This will
allow some cleanups and having the siginfo ready to be used in gdbstub.

Sig

linux-user: Move tswap_siginfo out of target code

Move tswap_siginfo from target code to handle_pending_signal. This will
allow some cleanups and having the siginfo ready to be used in gdbstub.

Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240309030901.1726211-3-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

show more ...

{linux,bsd}-user: Introduce get_task_state()

A CPU's TaskState is stored in the CPUState's void *opaque field,
accessing which is somewhat awkward due to having to use a cast.
Introduce a wrapper an

{linux,bsd}-user: Introduce get_task_state()

A CPU's TaskState is stored in the CPUState's void *opaque field,
accessing which is somewhat awkward due to having to use a cast.
Introduce a wrapper and use it everywhere.

Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240219141628.246823-3-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-4-alex.bennee@linaro.org>

show more ...

linux-user: Add missing signals in strace output

Some of the guest signal numbers are currently not converted to
their representative names in the strace output, e.g. SIGVTALRM.

This patch introduc

linux-user: Add missing signals in strace output

Some of the guest signal numbers are currently not converted to
their representative names in the strace output, e.g. SIGVTALRM.

This patch introduces a smart way to generate and keep in sync the
host-to-guest and guest-to-host signal conversion tables for usage in
the qemu signal and strace code. This ensures that any signals
will now show up in both tables.

There is no functional change in this patch - with the exception that yet
missing signal names now show up in the strace code too.

Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220918194555.83535-2-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: Add missing signals in strace output

Some of the guest signal numbers are currently not converted to
their representative names in the strace output, e.g. SIGVTALRM.

This patch introduc

linux-user: Add missing signals in strace output

Some of the guest signal numbers are currently not converted to
their representative names in the strace output, e.g. SIGVTALRM.

This patch introduces a smart way to generate and keep in sync the
host-to-guest and guest-to-host signal conversion tables for usage in
the qemu signal and strace code. This ensures that any signals
will now show up in both tables.

There is no functional change in this patch - with the exception that yet
missing signal names now show up in the strace code too.

Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220918194555.83535-2-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: Add missing signals in strace output

Some of the guest signal numbers are currently not converted to
their representative names in the strace output, e.g. SIGVTALRM.

This patch introduc

linux-user: Add missing signals in strace output

Some of the guest signal numbers are currently not converted to
their representative names in the strace output, e.g. SIGVTALRM.

This patch introduces a smart way to generate and keep in sync the
host-to-guest and guest-to-host signal conversion tables for usage in
the qemu signal and strace code. This ensures that any signals
will now show up in both tables.

There is no functional change in this patch - with the exception that yet
missing signal names now show up in the strace code too.

Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220918194555.83535-2-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: Split out helpers for sigsuspend

Two new functions: process_sigsuspend_mask and finish_sigsuspend_mask.
Move the size check and copy-from-user code.

Signed-off-by: Richard Henderson <ri

linux-user: Split out helpers for sigsuspend

Two new functions: process_sigsuspend_mask and finish_sigsuspend_mask.
Move the size check and copy-from-user code.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220315084308.433109-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: Return void from queue_signal()

The linux-user queue_signal() function always returns 1, and none of
its callers check the return value. Give it a void return type
instead.

The return

linux-user: Return void from queue_signal()

The linux-user queue_signal() function always returns 1, and none of
its callers check the return value. Give it a void return type
instead.

The return value is a leftover from the old pre-2016 linux-user
signal handling code, which really did have a queue of signals and so
might return a failure indication if too many signals were queued at
once. The current design avoids having to ever have more than one
signal queued via queue_signal() at once, so it can never fail.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220114153732.3767229-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: Create special-errno.h

Pull the two internal errno used by qemu internally into their own
header file. This includes the one define required by safe-syscall.S.

Reviewed-by: Warner Losh

linux-user: Create special-errno.h

Pull the two internal errno used by qemu internally into their own
header file. This includes the one define required by safe-syscall.S.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

linux-user: Rename TARGET_ERESTARTSYS to QEMU_ERESTARTSYS

This value is fully internal to qemu, and so is not a TARGET define.
We use this as an extra marker for both host and target errno.

Reviewe

linux-user: Rename TARGET_ERESTARTSYS to QEMU_ERESTARTSYS

This value is fully internal to qemu, and so is not a TARGET define.
We use this as an extra marker for both host and target errno.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

linux-user: Add infrastructure for a signal trampoline page

Allocate a page to hold the signal trampoline(s).
Invoke a guest-specific hook to fill in the contents
of the page before marking it read-

linux-user: Add infrastructure for a signal trampoline page

Allocate a page to hold the signal trampoline(s).
Invoke a guest-specific hook to fill in the contents
of the page before marking it read-execute again.

Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: Provide new force_sig_fault() function

In many places in the linux-user code we need to queue a signal for
the guest using the QEMU_SI_FAULT si_type. This requires that the
caller sets

linux-user: Provide new force_sig_fault() function

In many places in the linux-user code we need to queue a signal for
the guest using the QEMU_SI_FAULT si_type. This requires that the
caller sets up and passes us a target_siginfo, including setting the
appropriate part of the _sifields union for the si_type. In a number
of places the code forgets to set the _sifields union field.

Provide a new force_sig_fault() function, which does the same thing
as the Linux kernel function of that name -- it takes the signal
number, the si_code value and the address to use in
_sifields._sigfault, and assembles the target_siginfo itself. This
makes the callsites simpler and means it's harder to forget to pass
in an address value.

We follow force_sig() and the kernel's force_sig_fault() in not
requiring the caller to pass in the CPU pointer but always acting
on the CPU of the current thread.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210813131809.28655-6-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: Split signal-related prototypes into signal-common.h

Split the signal related prototypes into the existing header file
signal-common.h, and include it in those places that now require it

linux-user: Split signal-related prototypes into signal-common.h

Split the signal related prototypes into the existing header file
signal-common.h, and include it in those places that now require it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: Pass CPUArchState to target_restore_altstack

In most cases we were already passing get_sp_from_cpustate
directly to the function. In other cases, we were passing
a local variable which

linux-user: Pass CPUArchState to target_restore_altstack

In most cases we were already passing get_sp_from_cpustate
directly to the function. In other cases, we were passing
a local variable which already contained the same value.
In the rest of the cases, we were passing the stack pointer
out of env directly.

Reviewed by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: Split out target_restore_altstack

Create a function to match target_save_altstack.
Fix some style and unlock issues in do_sigaltstack.

Signed-off-by: Richard Henderson <richard.henderso

linux-user: Split out target_restore_altstack

Create a function to match target_save_altstack.
Fix some style and unlock issues in do_sigaltstack.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: Make sigaltstack stacks per-thread

The alternate signal stack set up by the sigaltstack syscall is
supposed to be per-thread. We were incorrectly implementing it as
process-wide. This

linux-user: Make sigaltstack stacks per-thread

The alternate signal stack set up by the sigaltstack syscall is
supposed to be per-thread. We were incorrectly implementing it as
process-wide. This causes problems for guest binaries that rely on
this. Notably the Go runtime does, and so we were seeing crashes
caused by races where two guest threads might incorrectly both
execute on the same stack simultaneously.

Replace the global target_sigaltstack_used with a field
sigaltstack_used in the TaskState, and make all the references to the
old global instead get a pointer to the TaskState and use the field.

Fixes: https://bugs.launchpad.net/qemu/+bug/1696773
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190725131645.19501-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: introduce target_sigsp() and target_save_altstack()

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <201804111

linux-user: introduce target_sigsp() and target_save_altstack()

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411192347.30228-1-laurent@vivier.eu>

show more ...

linux-user: define TARGET_ARCH_HAS_SETUP_FRAME

Instead of calling setup_frame() conditionally to a list of known targets,
define TARGET_ARCH_HAS_SETUP_FRAME if the target provides the function
and c

linux-user: define TARGET_ARCH_HAS_SETUP_FRAME

Instead of calling setup_frame() conditionally to a list of known targets,
define TARGET_ARCH_HAS_SETUP_FRAME if the target provides the function
and call it only if the macro is defined.

Move declarations of setup_frame() and setup_rt_frame() to
linux-user/signal-common.h

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-21-laurent@vivier.eu>

show more ...

linux-user: create a dummy per arch signal.c

Create a signal-common.h for future use by these new files
and use it in the existing signal.c

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewe

linux-user: create a dummy per arch signal.c

Create a signal-common.h for future use by these new files
and use it in the existing signal.c

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-2-laurent@vivier.eu>

show more ...