iotests: update test owner contact information

Quite a few of these tests have stale contact information. This patch
updates the stale ones that I happen to be aware of at the moment.

Signed-off-by

iotests: update test owner contact information

Quite a few of these tests have stale contact information. This patch
updates the stale ones that I happen to be aware of at the moment.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220322174212.1169630-1-jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

show more ...

iotests: define group in each iotest

We are going to drop group file. Define group in tests as a preparatory
step.

The patch is generated by

cd tests/qemu-iotests

grep '^[0-9]\{3\} ' grou

iotests: define group in each iotest

We are going to drop group file. Define group in tests as a preparatory
step.

The patch is generated by

cd tests/qemu-iotests

grep '^[0-9]\{3\} ' group | while read line; do
file=$(awk '{print $1}' <<< "$line");
groups=$(sed -e 's/^... //' <<< "$line");
awk "NR==2{print \"# group: $groups\"}1" $file > tmp;
cat tmp > $file;
done

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

show more ...

iotests: Enable fuse for many tests

Many tests (that do not support generic protocols) can run just fine
with FUSE-exported images, so allow them to. Note that this is no
attempt at being definitel

iotests: Enable fuse for many tests

Many tests (that do not support generic protocols) can run just fine
with FUSE-exported images, so allow them to. Note that this is no
attempt at being definitely complete. There are some tests that might
be modified to run on FUSE, but this patch still skips them. This patch
only tries to pick the rather low-hanging fruits.

Note that 221 and 250 only pass when .lseek is correctly implemented,
which is only possible with a libfuse that is 3.8 or newer.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-20-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

iotests: Use convert -n in some cases

qemu-img convert (without -n) can often be replaced by a combination of
_make_test_img + qemu-img convert -n. Doing so allows converting to
protocols that do n

iotests: Use convert -n in some cases

qemu-img convert (without -n) can often be replaced by a combination of
_make_test_img + qemu-img convert -n. Doing so allows converting to
protocols that do not allow direct file creation, such as FUSE exports.
The only problem is that for formats other than qcow2 and qed (qcow1 at
least), this may lead to high disk usage for some reason, so we cannot
do it everywhere.

But we can do it in 028 and 089, so let us do that so they can run on
FUSE exports. Also, in 028 this allows us to remove a 9-line comment
that used to explain why we cannot safely filter drive-backup's image
creation output.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-10-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

iotests/028: Add test for cross-base-EOF reads

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200728120806.265916-3-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsement

iotests/028: Add test for cross-base-EOF reads

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200728120806.265916-3-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Claudio Fontana <cfontana@suse.de>

show more ...

iotests: Specify explicit backing format where sensible

There are many existing qcow2 images that specify a backing file but
no format. This has been the source of CVEs in the past, but has
become

iotests: Specify explicit backing format where sensible

There are many existing qcow2 images that specify a backing file but
no format. This has been the source of CVEs in the past, but has
become more prominent of a problem now that libvirt has switched to
-blockdev. With older -drive, at least the probing was always done by
qemu (so the only risk of a changed format between successive boots of
a guest was if qemu was upgraded and probed differently). But with
newer -blockdev, libvirt must specify a format; if libvirt guesses raw
where the image was formatted, this results in data corruption visible
to the guest; conversely, if libvirt guesses qcow2 where qemu was
using raw, this can result in potential security holes, so modern
libvirt instead refuses to use images without explicit backing format.

The change in libvirt to reject images without explicit backing format
has pointed out that a number of tools have been far too reliant on
probing in the past. It's time to set a better example in our own
iotests of properly setting this parameter.

iotest calls to create, rebase, and convert are all impacted to some
degree. It's a bit annoying that we are inconsistent on command line
- while all of those accept -o backing_file=...,backing_fmt=..., the
shortcuts are different: create and rebase have -b and -F, while
convert has -B but no -F. (amend has no shortcuts, but the previous
patch just deprecated the use of amend to change backing chains).

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-9-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

tests/qemu-iotests: use AIOMODE with various tests

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@r

tests/qemu-iotests: use AIOMODE with various tests

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120141858.587874-16-stefanha@redhat.com
Message-Id: <20200120141858.587874-16-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

iotests: Use _rm_test_img for deleting test images

Just rm will not delete external data files. Use _rm_test_img every
time we delete a test image.

(In the process, clean up the indentation of eve

iotests: Use _rm_test_img for deleting test images

Just rm will not delete external data files. Use _rm_test_img every
time we delete a test image.

(In the process, clean up the indentation of every _cleanup() this patch
touches.)

((Also, use quotes consistently. I am happy to see unquoted instances
like "rm -rf $TEST_DIR/..." go.))

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-16-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

show more ...

iotests/028: Fix for long $TEST_DIRs

For long test image paths, the order of the "Formatting" line and the
"(qemu)" prompt after a drive_backup HMP command may be reversed. In
fact, the interaction

iotests/028: Fix for long $TEST_DIRs

For long test image paths, the order of the "Formatting" line and the
"(qemu)" prompt after a drive_backup HMP command may be reversed. In
fact, the interaction between the prompt and the line may lead to the
"Formatting" to being greppable at all after "read"-ing it (if the
prompt injects an IFS character into the "Formatting" string).

So just wait until we get a prompt. At that point, the block job must
have been started, so "info block-jobs" will only return "No active
jobs" once it is done.

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

iotests: extended timeout under Valgrind

As the iotests run longer under the Valgrind, the QEMU_COMM_TIMEOUT is
to be increased in the test cases 028, 183 and 192 when running under
the Valgrind.

S

iotests: extended timeout under Valgrind

As the iotests run longer under the Valgrind, the QEMU_COMM_TIMEOUT is
to be increased in the test cases 028, 183 and 192 when running under
the Valgrind.

Suggested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

qemu-iotests: Improve portability by searching bash in the $PATH

Bash is not always installed as /bin/bash. In particular on OpenBSD,
the package installs it in /usr/local/bin.
Use the 'env' shebang

qemu-iotests: Improve portability by searching bash in the $PATH

Bash is not always installed as /bin/bash. In particular on OpenBSD,
the package installs it in /usr/local/bin.
Use the 'env' shebang to search bash in the $PATH.

Patch created mechanically by running:

$ git grep -lE '#! ?/bin/bash' -- tests/qemu-iotests \
| while read f; do \
sed -i 's|^#!.\?/bin/bash$|#!/usr/bin/env bash|' $f; \
done

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

qemu-iotests: remove unused variable 'here'

Running
git grep '\$here' tests/qemu-iotests

has 0 hits, which means we are setting a variable that has
no use. It appears that commit e8f8624d removed

qemu-iotests: remove unused variable 'here'

Running
git grep '\$here' tests/qemu-iotests

has 0 hits, which means we are setting a variable that has
no use. It appears that commit e8f8624d removed the last
use. So execute the following cmd to remove all of
the 'here=...' lines as dead code.

sed -i '/^here=/d' $(git grep -l '^here=' tests/qemu-iotests)

Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-3-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>

show more ...

qemu-iotests: _cleanup_qemu must be called on exit

For the tests that use the common.qemu functions for running a QEMU
process, _cleanup_qemu must be called in the exit function.

If it is not, if t

qemu-iotests: _cleanup_qemu must be called on exit

For the tests that use the common.qemu functions for running a QEMU
process, _cleanup_qemu must be called in the exit function.

If it is not, if the qemu process aborts, then not all of the droppings
are cleaned up (e.g. pidfile, fifos).

This updates those tests that did not have a cleanup in qemu-iotests.

(I swapped spaces for tabs in test 102 as well)

Reported-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: d59c2f6ad6c1da8b9b3c7f357c94a7122ccfc55a.1492544096.git.jcody@redhat.com

show more ...

qemu-iotests: tests: do not set unused tmp variable

The previous commit removed the last usage of ${tmp} inside the tests
themselves; the only remaining users are sourced by check. So we can now
dro

qemu-iotests: tests: do not set unused tmp variable

The previous commit removed the last usage of ${tmp} inside the tests
themselves; the only remaining users are sourced by check. So we can now
drop this variable from the tests.

Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1460472980-26319-4-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>

show more ...

qemu-iotests: Reduce racy output in 028

On my machine, './check -qcow2 028' was failing about 80% of the
time, due to a race in how many times the repeated attempts
to run 'info block-jobs' could oc

qemu-iotests: Reduce racy output in 028

On my machine, './check -qcow2 028' was failing about 80% of the
time, due to a race in how many times the repeated attempts
to run 'info block-jobs' could occur before the job was done,
showing up as a failure of fewer '(qemu) ' prompts than in the
expected output. Silence the output during the repetitions, then
add a final clean command to keep the expected output useful;
once patched, I was finally able to run the test 20 times in a
row with no failures.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

iotests: 028: Use TEST_IMG override instead of "mv"

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-6-git-send-email-famz@redhat.com

iotests: 028: Use TEST_IMG override instead of "mv"

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-6-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

show more ...

qemu-iotests: Fix 028 reference output for qed

We need to filter out driver-specific options in the "Formatting..."
string printed by qemu when creating the backup image.

Reported-by: Peter Wu <pet

qemu-iotests: Fix 028 reference output for qed

We need to filter out driver-specific options in the "Formatting..."
string printed by qemu when creating the backup image.

Reported-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Peter Wu <peter@lekensteyn.nl>

show more ...

qemu-iotests: fix 028 failure due to disk image path

The disk image path is echoed by QEMU's readline when the "drive_backup
disk ${TEST_IMG}.copy" HMP command is issued. Unfortunately it is very
h

qemu-iotests: fix 028 failure due to disk image path

The disk image path is echoed by QEMU's readline when the "drive_backup
disk ${TEST_IMG}.copy" HMP command is issued. Unfortunately it is very
hard to filter out the path due to readline's character-by-character
output (with terminal escape sequences). Just redirect this command to
/dev/null for now.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>

show more ...

block/backup: Fix hang for unaligned image size

When doing a block backup of an image with an unaligned size (with
respect to the BACKUP_CLUSTER_SIZE), qemu would check the allocation
status of sect

block/backup: Fix hang for unaligned image size

When doing a block backup of an image with an unaligned size (with
respect to the BACKUP_CLUSTER_SIZE), qemu would check the allocation
status of sectors after the end of the image. bdrv_is_allocated()
returns a result that is valid for 0 sectors in this case, so the backup
job ran into an endless loop.

Stop looping when seeing a result valid for 0 sectors, we're at EOF then.

The test case looks somewhat unrelated at first sight because I
originally tried to reproduce a different suspected bug that turned out
to not exist. Still a good test case and it accidentally found this one.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

show more ...

qemu-iotests: change _supported_proto to file for various tests

all these tests do anything of the following and thus fail with any
protocol other than file:
- the tests use rm, cp or mv shell comm

qemu-iotests: change _supported_proto to file for various tests

all these tests do anything of the following and thus fail with any
protocol other than file:
- the tests use rm, cp or mv shell commands which only work on file
- the tests use qcow2.py
- the images construct new filenames (e.g. backing file names) and
the logic is broken for anything else than file

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

qemu-iotests: Quote $TEST_IMG* and $TEST_DIR usage

A lot of image filename and paths are used unquoted. Quote these to
make sure that directories / filenames with spaces are not problematic.

Signe

qemu-iotests: Quote $TEST_IMG* and $TEST_DIR usage

A lot of image filename and paths are used unquoted. Quote these to
make sure that directories / filenames with spaces are not problematic.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

qemu-iotests: Test rebase with short backing file

This tests that qemu-img rebase doesn't assume that the backing file has
the same size as the image, but considers that it can be smaller.

Signed-o

qemu-iotests: Test rebase with short backing file

This tests that qemu-img rebase doesn't assume that the backing file has
the same size as the image, but considers that it can be smaller.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>

show more ...

qemu-iotests: Use zero-based offsets for IO patterns

The io_pattern style functions have the following loop:

for i in `seq 1 $count`; do
echo ... $(( start + i * step )) ...
done

Offsets

qemu-iotests: Use zero-based offsets for IO patterns

The io_pattern style functions have the following loop:

for i in `seq 1 $count`; do
echo ... $(( start + i * step )) ...
done

Offsets are 1-based so start=1024, step=512, count=4 yields:
1536, 2048, 2560, 3072

Normally we expect:
1024, 1536, 2048, 2560

Most tests ignore this detail, which means that they perform I/O to a
slightly different range than expected by the test author.

Later on things got less innocent and tests started trying to compensate
for the 1-based indexing. This included negative start values in test
024 and my own attempt with count-1 in test 028!

The end result is that tests that use io_pattern are hard to reason
about and don't work the way you'd expect. It's time to clean this mess
up.

This patch switches io_pattern to 0-based offsets. This requires
adjusting the golden outputs since I/O ranges are now shifted and output
differs.

Verifying these output diffs is easy, however. Each diff hunk moves one
I/O from beyond the end of the pattern range to the beginning.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

show more ...

qemu-iotests: add support for rbd and sheepdog protocols

This patch introduces tests for protocols other than file, and
initially supports rbd and sheepdog.

Signed-off-by: MORITA Kazutaka <morita.k

qemu-iotests: add support for rbd and sheepdog protocols

This patch introduces tests for protocols other than file, and
initially supports rbd and sheepdog.

Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Christoph Hellwig <hch@lst.de>

show more ...

qemu-iotests: add support for qed format

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>