xref: /netbsd/sys/dev/ic/uha.c (revision 882ffae7)
1 /*	$NetBSD: uha.c,v 1.50 2022/09/25 18:43:32 thorpej Exp $	*/
2 
3 /*-
4  * Copyright (c) 1997, 1998 The NetBSD Foundation, Inc.
5  * All rights reserved.
6  *
7  * This code is derived from software contributed to The NetBSD Foundation
8  * by Charles M. Hannum and by Jason R. Thorpe of the Numerical Aerospace
9  * Simulation Facility, NASA Ames Research Center.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions and the following disclaimer.
16  * 2. Redistributions in binary form must reproduce the above copyright
17  *    notice, this list of conditions and the following disclaimer in the
18  *    documentation and/or other materials provided with the distribution.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
21  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
22  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
23  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
24  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30  * POSSIBILITY OF SUCH DAMAGE.
31  */
32 
33 /*
34  * Ported for use with the UltraStor 14f by Gary Close (gclose@wvnvms.wvnet.edu)
35  * Slight fixes to timeouts to run with the 34F
36  * Thanks to Julian Elischer for advice and help with this port.
37  *
38  * Originally written by Julian Elischer (julian@tfs.com)
39  * for TRW Financial Systems for use under the MACH(2.5) operating system.
40  *
41  * TRW Financial Systems, in accordance with their agreement with Carnegie
42  * Mellon University, makes this software available to CMU to distribute
43  * or use in any manner that they see fit as long as this message is kept with
44  * the software. For this reason TFS also grants any other persons or
45  * organisations permission to use or modify this software.
46  *
47  * TFS supplies this software to be publicly redistributed
48  * on the understanding that TFS is not responsible for the correct
49  * functioning of this software in any circumstances.
50  *
51  * commenced: Sun Sep 27 18:14:01 PDT 1992
52  * slight mod to make work with 34F as well: Wed Jun  2 18:05:48 WST 1993
53  */
54 
55 #include <sys/cdefs.h>
56 __KERNEL_RCSID(0, "$NetBSD: uha.c,v 1.50 2022/09/25 18:43:32 thorpej Exp $");
57 
58 #undef UHADEBUG
59 #ifdef DDB
60 #define	integrate
61 #else
62 #define	integrate	static inline
63 #endif
64 
65 #include <sys/param.h>
66 #include <sys/systm.h>
67 #include <sys/kernel.h>
68 #include <sys/errno.h>
69 #include <sys/ioctl.h>
70 #include <sys/device.h>
71 #include <sys/buf.h>
72 #include <sys/proc.h>
73 
74 #include <sys/bus.h>
75 #include <sys/intr.h>
76 
77 #include <dev/scsipi/scsi_all.h>
78 #include <dev/scsipi/scsipi_all.h>
79 #include <dev/scsipi/scsiconf.h>
80 
81 #include <dev/ic/uhareg.h>
82 #include <dev/ic/uhavar.h>
83 
84 #ifndef	DDB
85 #define Debugger() panic("should call debugger here (uha.c)")
86 #endif /* ! DDB */
87 
88 #define	UHA_MAXXFER	((UHA_NSEG - 1) << PGSHIFT)
89 
90 integrate void uha_reset_mscp(struct uha_softc *, struct uha_mscp *);
91 void uha_free_mscp(struct uha_softc *, struct uha_mscp *);
92 integrate int uha_init_mscp(struct uha_softc *, struct uha_mscp *);
93 struct uha_mscp *uha_get_mscp(struct uha_softc *);
94 void uhaminphys(struct buf *);
95 void uha_scsipi_request(struct scsipi_channel *, scsipi_adapter_req_t, void *);
96 int uha_create_mscps(struct uha_softc *, struct uha_mscp *, int);
97 
98 #define	UHA_ABORT_TIMEOUT	2000	/* time to wait for abort (mSec) */
99 
100 /*
101  * Attach all the sub-devices we can find
102  */
103 void
uha_attach(struct uha_softc * sc,struct uha_probe_data * upd)104 uha_attach(struct uha_softc *sc, struct uha_probe_data *upd)
105 {
106 	struct scsipi_adapter *adapt = &sc->sc_adapter;
107 	struct scsipi_channel *chan = &sc->sc_channel;
108 	bus_dma_segment_t seg;
109 	int i, error, rseg;
110 
111 	TAILQ_INIT(&sc->sc_free_mscp);
112 
113 	(sc->init)(sc);
114 
115 	/*
116 	 * Fill in the scsipi_adapter.
117 	 */
118 	memset(adapt, 0, sizeof(*adapt));
119 	adapt->adapt_dev = sc->sc_dev;
120 	adapt->adapt_nchannels = 1;
121 	/* adapt_openings initialized below */
122 	/* adapt_max_periph initialized below */
123 	adapt->adapt_request = uha_scsipi_request;
124 	adapt->adapt_minphys = uhaminphys;
125 
126 	/*
127 	 * Fill in the scsipi_channel.
128 	 */
129 	memset(chan, 0, sizeof(*chan));
130 	chan->chan_adapter = adapt;
131 	chan->chan_bustype = &scsi_bustype;
132 	chan->chan_channel = 0;
133 	chan->chan_ntargets = 8;
134 	chan->chan_nluns = 8;
135 	chan->chan_id = upd->sc_scsi_dev;
136 
137 #define	MSCPSIZE	(UHA_MSCP_MAX * sizeof(struct uha_mscp))
138 
139 	/*
140 	 * Allocate the MSCPs.
141 	 */
142 	if ((error = bus_dmamem_alloc(sc->sc_dmat, MSCPSIZE,
143 	    PAGE_SIZE, 0, &seg, 1, &rseg, BUS_DMA_NOWAIT)) != 0) {
144 		aprint_error_dev(sc->sc_dev,
145 		    "unable to allocate mscps, error = %d\n", error);
146 		return;
147 	}
148 	if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg,
149 	    MSCPSIZE, (void **)&sc->sc_mscps,
150 	    BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
151 		aprint_error_dev(sc->sc_dev,
152 		    "unable to map mscps, error = %d\n", error);
153 		return;
154 	}
155 
156 	/*
157 	 * Create and load the DMA map used for the mscps.
158 	 */
159 	if ((error = bus_dmamap_create(sc->sc_dmat, MSCPSIZE,
160 	    1, MSCPSIZE, 0, BUS_DMA_NOWAIT | sc->sc_dmaflags,
161 	    &sc->sc_dmamap_mscp)) != 0) {
162 		aprint_error_dev(sc->sc_dev,
163 		    "unable to create mscp DMA map, error = %d\n", error);
164 		return;
165 	}
166 	if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap_mscp,
167 	    sc->sc_mscps, MSCPSIZE, NULL, BUS_DMA_NOWAIT)) != 0) {
168 		aprint_error_dev(sc->sc_dev,
169 		    "unable to load mscp DMA map, error = %d\n", error);
170 		return;
171 	}
172 
173 #undef MSCPSIZE
174 
175 	/*
176 	 * Initialize the mscps.
177 	 */
178 	i = uha_create_mscps(sc, sc->sc_mscps, UHA_MSCP_MAX);
179 	if (i == 0) {
180 		aprint_error_dev(sc->sc_dev, "unable to create mscps\n");
181 		return;
182 	} else if (i != UHA_MSCP_MAX) {
183 		aprint_error_dev(sc->sc_dev,
184 		    "WARNING: only %d of %d mscps created\n", i, UHA_MSCP_MAX);
185 	}
186 
187 	adapt->adapt_openings = i;
188 	adapt->adapt_max_periph = adapt->adapt_openings;
189 
190 	/*
191 	 * ask the adapter what subunits are present
192 	 */
193 	config_found(sc->sc_dev, &sc->sc_channel, scsiprint, CFARGS_NONE);
194 }
195 
196 integrate void
uha_reset_mscp(struct uha_softc * sc,struct uha_mscp * mscp)197 uha_reset_mscp(struct uha_softc *sc, struct uha_mscp *mscp)
198 {
199 
200 	mscp->flags = 0;
201 }
202 
203 /*
204  * A mscp (and hence a mbx-out) is put onto the free list.
205  */
206 void
uha_free_mscp(struct uha_softc * sc,struct uha_mscp * mscp)207 uha_free_mscp(struct uha_softc *sc, struct uha_mscp *mscp)
208 {
209 	int s;
210 
211 	s = splbio();
212 	uha_reset_mscp(sc, mscp);
213 	TAILQ_INSERT_HEAD(&sc->sc_free_mscp, mscp, chain);
214 	splx(s);
215 }
216 
217 integrate int
uha_init_mscp(struct uha_softc * sc,struct uha_mscp * mscp)218 uha_init_mscp(struct uha_softc *sc, struct uha_mscp *mscp)
219 {
220 	bus_dma_tag_t dmat = sc->sc_dmat;
221 	int hashnum, error;
222 
223 	/*
224 	 * Create the DMA map for this MSCP.
225 	 */
226 	error = bus_dmamap_create(dmat, UHA_MAXXFER, UHA_NSEG, UHA_MAXXFER,
227 	    0, BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW | sc->sc_dmaflags,
228 	    &mscp->dmamap_xfer);
229 	if (error) {
230 		aprint_error_dev(sc->sc_dev,
231 		    "can't create mscp DMA map, error = %d\n", error);
232 		return (error);
233 	}
234 
235 	/*
236 	 * put in the phystokv hash table
237 	 * Never gets taken out.
238 	 */
239 	mscp->hashkey = sc->sc_dmamap_mscp->dm_segs[0].ds_addr +
240 	    UHA_MSCP_OFF(mscp);
241 	hashnum = MSCP_HASH(mscp->hashkey);
242 	mscp->nexthash = sc->sc_mscphash[hashnum];
243 	sc->sc_mscphash[hashnum] = mscp;
244 	uha_reset_mscp(sc, mscp);
245 	return (0);
246 }
247 
248 /*
249  * Create a set of MSCPs and add them to the free list.
250  */
251 int
uha_create_mscps(struct uha_softc * sc,struct uha_mscp * mscpstore,int count)252 uha_create_mscps(struct uha_softc *sc, struct uha_mscp *mscpstore, int count)
253 {
254 	struct uha_mscp *mscp;
255 	int i, error;
256 
257 	memset(mscpstore, 0, sizeof(struct uha_mscp) * count);
258 	for (i = 0; i < count; i++) {
259 		mscp = &mscpstore[i];
260 		if ((error = uha_init_mscp(sc, mscp)) != 0) {
261 			aprint_error_dev(sc->sc_dev,
262 			    "unable to initialize mscp, error = %d\n", error);
263 			goto out;
264 		}
265 		TAILQ_INSERT_TAIL(&sc->sc_free_mscp, mscp, chain);
266 	}
267  out:
268 	return (i);
269 }
270 
271 /*
272  * Get a free mscp
273  *
274  * If there are none, see if we can allocate a new one.  If so, put it in the
275  * hash table too otherwise either return an error or sleep.
276  */
277 struct uha_mscp *
uha_get_mscp(struct uha_softc * sc)278 uha_get_mscp(struct uha_softc *sc)
279 {
280 	struct uha_mscp *mscp;
281 	int s;
282 
283 	s = splbio();
284 	mscp = TAILQ_FIRST(&sc->sc_free_mscp);
285 	if (mscp != NULL) {
286 		TAILQ_REMOVE(&sc->sc_free_mscp, mscp, chain);
287 		mscp->flags |= MSCP_ALLOC;
288 	}
289 	splx(s);
290 	return (mscp);
291 }
292 
293 /*
294  * given a physical address, find the mscp that it corresponds to.
295  */
296 struct uha_mscp *
uha_mscp_phys_kv(struct uha_softc * sc,u_long mscp_phys)297 uha_mscp_phys_kv(struct uha_softc *sc, u_long mscp_phys)
298 {
299 	int hashnum = MSCP_HASH(mscp_phys);
300 	struct uha_mscp *mscp = sc->sc_mscphash[hashnum];
301 
302 	while (mscp) {
303 		if (mscp->hashkey == mscp_phys)
304 			break;
305 		mscp = mscp->nexthash;
306 	}
307 	return (mscp);
308 }
309 
310 /*
311  * We have a mscp which has been processed by the adaptor, now we look to see
312  * how the operation went.
313  */
314 void
uha_done(struct uha_softc * sc,struct uha_mscp * mscp)315 uha_done(struct uha_softc *sc, struct uha_mscp *mscp)
316 {
317 	bus_dma_tag_t dmat = sc->sc_dmat;
318 	struct scsi_sense_data *s1, *s2;
319 	struct scsipi_xfer *xs = mscp->xs;
320 
321 	SC_DEBUG(xs->xs_periph, SCSIPI_DB2, ("uha_done\n"));
322 
323 	bus_dmamap_sync(dmat, sc->sc_dmamap_mscp,
324 	    UHA_MSCP_OFF(mscp), sizeof(struct uha_mscp),
325 	    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
326 
327 	/*
328 	 * If we were a data transfer, unload the map that described
329 	 * the data buffer.
330 	 */
331 	if (xs->datalen) {
332 		bus_dmamap_sync(dmat, mscp->dmamap_xfer, 0,
333 		    mscp->dmamap_xfer->dm_mapsize,
334 		    (xs->xs_control & XS_CTL_DATA_IN) ? BUS_DMASYNC_POSTREAD :
335 		    BUS_DMASYNC_POSTWRITE);
336 		bus_dmamap_unload(dmat, mscp->dmamap_xfer);
337 	}
338 
339 	/*
340 	 * Otherwise, put the results of the operation
341 	 * into the xfer and call whoever started it
342 	 */
343 	if ((mscp->flags & MSCP_ALLOC) == 0) {
344 		aprint_error_dev(sc->sc_dev, "exiting ccb not allocated!\n");
345 		Debugger();
346 		return;
347 	}
348 	if (xs->error == XS_NOERROR) {
349 		if (mscp->host_stat != UHA_NO_ERR) {
350 			switch (mscp->host_stat) {
351 			case UHA_SBUS_TIMEOUT:		/* No response */
352 				xs->error = XS_SELTIMEOUT;
353 				break;
354 			default:	/* Other scsi protocol messes */
355 				aprint_error_dev(sc->sc_dev, "host_stat %x\n",
356 				    mscp->host_stat);
357 				xs->error = XS_DRIVER_STUFFUP;
358 			}
359 		} else if (mscp->target_stat != SCSI_OK) {
360 			switch (mscp->target_stat) {
361 			case SCSI_CHECK:
362 				s1 = &mscp->mscp_sense;
363 				s2 = &xs->sense.scsi_sense;
364 				*s2 = *s1;
365 				xs->error = XS_SENSE;
366 				break;
367 			case SCSI_BUSY:
368 				xs->error = XS_BUSY;
369 				break;
370 			default:
371 				aprint_error_dev(sc->sc_dev,
372 				    "target_stat %x\n", mscp->target_stat);
373 				xs->error = XS_DRIVER_STUFFUP;
374 			}
375 		} else
376 			xs->resid = 0;
377 	}
378 	uha_free_mscp(sc, mscp);
379 	scsipi_done(xs);
380 }
381 
382 void
uhaminphys(struct buf * bp)383 uhaminphys(struct buf *bp)
384 {
385 
386 	if (bp->b_bcount > UHA_MAXXFER)
387 		bp->b_bcount = UHA_MAXXFER;
388 	minphys(bp);
389 }
390 
391 /*
392  * start a scsi operation given the command and the data address.  Also
393  * needs the unit, target and lu.
394  */
395 
396 void
uha_scsipi_request(struct scsipi_channel * chan,scsipi_adapter_req_t req,void * arg)397 uha_scsipi_request(struct scsipi_channel *chan, scsipi_adapter_req_t req,
398     void *arg)
399 {
400 	struct scsipi_xfer *xs;
401 	struct scsipi_periph *periph;
402 	struct uha_softc *sc = device_private(chan->chan_adapter->adapt_dev);
403 	bus_dma_tag_t dmat = sc->sc_dmat;
404 	struct uha_mscp *mscp;
405 	int error, seg, flags, s;
406 
407 
408 	switch (req) {
409 	case ADAPTER_REQ_RUN_XFER:
410 		xs = arg;
411 		periph = xs->xs_periph;
412 		flags = xs->xs_control;
413 
414 		SC_DEBUG(periph, SCSIPI_DB2, ("uha_scsipi_request\n"));
415 
416 		/* Get an MSCP to use. */
417 		mscp = uha_get_mscp(sc);
418 #ifdef DIAGNOSTIC
419 		/*
420 		 * This should never happen as we track the resources
421 		 * in the mid-layer.
422 		 */
423 		if (mscp == NULL) {
424 			scsipi_printaddr(periph);
425 			printf("unable to allocate mscp\n");
426 			panic("uha_scsipi_request");
427 		}
428 #endif
429 
430 		mscp->xs = xs;
431 		mscp->timeout = xs->timeout;
432 
433 		/*
434 		 * Put all the arguments for the xfer in the mscp
435 		 */
436 		if (flags & XS_CTL_RESET) {
437 			mscp->opcode = UHA_SDR;
438 			mscp->ca = 0x01;
439 		} else {
440 			if (xs->cmdlen > sizeof(mscp->scsi_cmd)) {
441 				aprint_error_dev(sc->sc_dev,
442 				    "cmdlen %d too large for MSCP\n",
443 				    xs->cmdlen);
444 				xs->error = XS_DRIVER_STUFFUP;
445 				goto out_bad;
446 			}
447 			mscp->opcode = UHA_TSP;
448 			/* XXX Not for tapes. */
449 			mscp->ca = 0x01;
450 			memcpy(&mscp->scsi_cmd, xs->cmd, mscp->scsi_cmd_length);
451 		}
452 		mscp->xdir = UHA_SDET;
453 		mscp->dcn = 0x00;
454 		mscp->chan = 0x00;
455 		mscp->target = periph->periph_target;
456 		mscp->lun = periph->periph_lun;
457 		mscp->scsi_cmd_length = xs->cmdlen;
458 		mscp->sense_ptr = sc->sc_dmamap_mscp->dm_segs[0].ds_addr +
459 		    UHA_MSCP_OFF(mscp) + offsetof(struct uha_mscp, mscp_sense);
460 		mscp->req_sense_length = sizeof(mscp->mscp_sense);
461 		mscp->host_stat = 0x00;
462 		mscp->target_stat = 0x00;
463 
464 		if (xs->datalen) {
465 			seg = 0;
466 #ifdef	TFS
467 			if (flags & SCSI_DATA_UIO) {
468 				error = bus_dmamap_load_uio(dmat,
469 				    mscp->dmamap_xfer, (struct uio *)xs->data,
470 				    ((flags & XS_CTL_NOSLEEP) ? BUS_DMA_NOWAIT :
471 				     BUS_DMA_WAITOK) | BUS_DMA_STREAMING |
472 				     ((flags & XS_CTL_DATA_IN) ? BUS_DMA_READ :
473 				      BUS_DMA_WRITE));
474 			} else
475 #endif /*TFS */
476 			{
477 				error = bus_dmamap_load(dmat,
478 				    mscp->dmamap_xfer, xs->data, xs->datalen,
479 				    NULL,
480 				    ((flags & XS_CTL_NOSLEEP) ? BUS_DMA_NOWAIT :
481 				     BUS_DMA_WAITOK) | BUS_DMA_STREAMING |
482 				     ((flags & XS_CTL_DATA_IN) ? BUS_DMA_READ :
483 				      BUS_DMA_WRITE));
484 			}
485 
486 			switch (error) {
487 			case 0:
488 				break;
489 
490 			case ENOMEM:
491 			case EAGAIN:
492 				xs->error = XS_RESOURCE_SHORTAGE;
493 				goto out_bad;
494 
495 			default:
496 				xs->error = XS_DRIVER_STUFFUP;
497 				aprint_error_dev(sc->sc_dev,
498 				    "error %d loading DMA map\n", error);
499  out_bad:
500 				uha_free_mscp(sc, mscp);
501 				scsipi_done(xs);
502 				return;
503 			}
504 
505 			bus_dmamap_sync(dmat, mscp->dmamap_xfer, 0,
506 			    mscp->dmamap_xfer->dm_mapsize,
507 			    (flags & XS_CTL_DATA_IN) ? BUS_DMASYNC_PREREAD :
508 			    BUS_DMASYNC_PREWRITE);
509 
510 			/*
511 			 * Load the hardware scatter/gather map with the
512 			 * contents of the DMA map.
513 			 */
514 			for (seg = 0;
515 			     seg < mscp->dmamap_xfer->dm_nsegs; seg++) {
516 				mscp->uha_dma[seg].seg_addr =
517 				    mscp->dmamap_xfer->dm_segs[seg].ds_addr;
518 				mscp->uha_dma[seg].seg_len =
519 				    mscp->dmamap_xfer->dm_segs[seg].ds_len;
520 			}
521 
522 			mscp->data_addr =
523 			    sc->sc_dmamap_mscp->dm_segs[0].ds_addr +
524 			    UHA_MSCP_OFF(mscp) + offsetof(struct uha_mscp,
525 			    uha_dma);
526 			mscp->data_length = xs->datalen;
527 			mscp->sgth = 0x01;
528 			mscp->sg_num = seg;
529 		} else {		/* No data xfer, use non S/G values */
530 			mscp->data_addr = (physaddr)0;
531 			mscp->data_length = 0;
532 			mscp->sgth = 0x00;
533 			mscp->sg_num = 0;
534 		}
535 		mscp->link_id = 0;
536 		mscp->link_addr = (physaddr)0;
537 
538 		bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap_mscp,
539 		    UHA_MSCP_OFF(mscp), sizeof(struct uha_mscp),
540 		    BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
541 
542 		s = splbio();
543 		(sc->start_mbox)(sc, mscp);
544 		splx(s);
545 
546 		if ((flags & XS_CTL_POLL) == 0)
547 			return;
548 
549 		/*
550 		 * If we can't use interrupts, poll on completion
551 		 */
552 		if ((sc->poll)(sc, xs, mscp->timeout)) {
553 			uha_timeout(mscp);
554 			if ((sc->poll)(sc, xs, mscp->timeout))
555 				uha_timeout(mscp);
556 		}
557 		return;
558 
559 	case ADAPTER_REQ_GROW_RESOURCES:
560 		/* XXX Not supported. */
561 		return;
562 
563 	case ADAPTER_REQ_SET_XFER_MODE:
564 		/*
565 		 * We can't really do this (the UltraStor controllers
566 		 * have their own config).
567 		 *
568 		 * XXX How do we query the config?
569 		 */
570 		return;
571 	}
572 }
573 void
uha_timeout(void * arg)574 uha_timeout(void *arg)
575 {
576 	struct uha_mscp *mscp = arg;
577 	struct scsipi_xfer *xs = mscp->xs;
578 	struct scsipi_periph *periph = xs->xs_periph;
579 	struct uha_softc *sc =
580 	    device_private(periph->periph_channel->chan_adapter->adapt_dev);
581 	int s;
582 
583 	scsipi_printaddr(periph);
584 	printf("timed out");
585 
586 	s = splbio();
587 
588 	if (mscp->flags & MSCP_ABORT) {
589 		/* abort timed out */
590 		printf(" AGAIN\n");
591 		/* XXX Must reset! */
592 	} else {
593 		/* abort the operation that has timed out */
594 		printf("\n");
595 		mscp->xs->error = XS_TIMEOUT;
596 		mscp->timeout = UHA_ABORT_TIMEOUT;
597 		mscp->flags |= MSCP_ABORT;
598 		(sc->start_mbox)(sc, mscp);
599 	}
600 
601 	splx(s);
602 }
603