1# makefile.vc -- -*- Makefile -*- 2# 3# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+) 4# 5# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to 6# make it suitable as a general package makefile. Look for the word EDIT 7# which marks sections that may need modification. As a minumum you will 8# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values 9# relevant to your package. 10# 11# See the file "license.terms" for information on usage and redistribution 12# of this file, and for a DISCLAIMER OF ALL WARRANTIES. 13# 14# Copyright (c) 1995-1996 Sun Microsystems, Inc. 15# Copyright (c) 1998-2000 Ajuba Solutions. 16# Copyright (c) 2001 ActiveState Corporation. 17# Copyright (c) 2001-2002 David Gravereaux. 18# Copyright (c) 2003 Pat Thoyts 19# 20#------------------------------------------------------------------------- 21# RCS: @(#)$Id: makefile.vc,v 1.4 2004/07/26 08:22:05 patthoyts Exp $ 22#------------------------------------------------------------------------- 23 24!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR) 25MSG = ^ 26You will need to run vcvars32.bat from Developer Studio, first, to setup^ 27the environment. Jump to this line to read the new instructions. 28!error $(MSG) 29!endif 30 31#------------------------------------------------------------------------------ 32# HOW TO USE this makefile: 33# 34# 1) It is now necessary to have %MSVCDir% set in the environment. This is 35# used as a check to see if vcvars32.bat had been run prior to running 36# nmake or during the installation of Microsoft Visual C++, MSVCDir had 37# been set globally and the PATH adjusted. Either way is valid. 38# 39# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin 40# directory to setup the proper environment, if needed, for your current 41# setup. This is a needed bootstrap requirement and allows the swapping of 42# different environments to be easier. 43# 44# 2) To use the Platform SDK (not expressly needed), run setenv.bat after 45# vcvars32.bat according to the instructions for it. This can also turn on 46# the 64-bit compiler, if your SDK has it. 47# 48# 3) Targets are: 49# all -- Builds everything. 50# <project> -- Builds the project (eg: nmake sample) 51# test -- Builds and runs the test suite. 52# install -- Installs the built binaries and libraries to $(INSTALLDIR) 53# in an appropriate subdirectory. 54# clean/realclean/distclean -- varying levels of cleaning. 55# 56# 4) Macros usable on the commandline: 57# INSTALLDIR=<path> 58# Sets where to install Tcl from the built binaries. 59# C:\Progra~1\Tcl is assumed when not specified. 60# 61# OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none 62# Sets special options for the core. The default is for none. 63# Any combination of the above may be used (comma separated). 64# 'none' will over-ride everything to nothing. 65# 66# static = Builds a static library of the core instead of a 67# dll. The shell will be static (and large), as well. 68# msvcrt = Effects the static option only to switch it from 69# using libcmt(d) as the C runtime [by default] to 70# msvcrt(d). This is useful for static embedding 71# support. 72# staticpkg = Effects the static option only to switch 73# tclshXX.exe to have the dde and reg extension linked 74# inside it. 75# threads = Turns on full multithreading support. 76# thrdalloc = Use the thread allocator (shared global free pool). 77# symbols = Adds symbols for step debugging. 78# profile = Adds profiling hooks. Map file is assumed. 79# loimpact = Adds a flag for how NT treats the heap to keep memory 80# in use, low. This is said to impact alloc performance. 81# 82# STATS=memdbg,compdbg,none 83# Sets optional memory and bytecode compiler debugging code added 84# to the core. The default is for none. Any combination of the 85# above may be used (comma separated). 'none' will over-ride 86# everything to nothing. 87# 88# memdbg = Enables the debugging memory allocator. 89# compdbg = Enables byte compilation logging. 90# 91# MACHINE=(IX86|IA64|ALPHA) 92# Set the machine type used for the compiler, linker, and 93# resource compiler. This hook is needed to tell the tools 94# when alternate platforms are requested. IX86 is the default 95# when not specified. 96# 97# TMP_DIR=<path> 98# OUT_DIR=<path> 99# Hooks to allow the intermediate and output directories to be 100# changed. $(OUT_DIR) is assumed to be 101# $(BINROOT)\(Release|Debug) based on if symbols are requested. 102# $(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default. 103# 104# TESTPAT=<file> 105# Reads the tests requested to be run from this file. 106# 107# CFG_ENCODING=encoding 108# name of encoding for configuration information. Defaults 109# to cp1252 110# 111# 5) Examples: 112# 113# Basic syntax of calling nmake looks like this: 114# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]] 115# 116# Standard (no frills) 117# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat 118# Setting environment for using Microsoft Visual C++ tools. 119# c:\tcl_src\win\>nmake -f makefile.vc all 120# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl 121# 122# Building for Win64 123# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat 124# Setting environment for using Microsoft Visual C++ tools. 125# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL 126# Targeting Windows pre64 RETAIL 127# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64 128# 129#------------------------------------------------------------------------------ 130#============================================================================== 131############################################################################### 132#------------------------------------------------------------------------------ 133 134!if !exist("makefile.vc") 135MSG = ^ 136You must run this makefile only from the directory it is in.^ 137Please `cd` to its location first. 138!error $(MSG) 139!endif 140 141#------------------------------------------------------------------------- 142# Project specific information (EDIT) 143# 144# You should edit this with the name and version of your project. This 145# information is used to generate the name of the package library and 146# it's install location. 147# 148# For example, the sample extension is going to build sample04.dll and 149# would install it into $(INSTALLDIR)\lib\sample04 150# 151# You need to specify the object files that need to be linked into your 152# binary here. 153# 154#------------------------------------------------------------------------- 155 156PROJECT = sqlite3 157!include "rules.vc" 158 159# nmakehelp -V <file> <tag> will search the file for tag, skips until a 160# number and returns all character until a character not in [0-9.ab] 161# is read. 162 163!if [echo REM = This file is generated from Makefile.vc > versions.vc] 164!endif 165# get project version from row "AC_INIT([sqlite], [3.x.y])" 166!if [echo DOTVERSION = \>> versions.vc] \ 167 && [nmakehlp -V ..\configure.ac AC_INIT >> versions.vc] 168!endif 169!include "versions.vc" 170 171VERSION = $(DOTVERSION:.=) 172STUBPREFIX = $(PROJECT)stub 173 174#------------------------------------------------------------------------- 175# Target names and paths ( shouldn't need changing ) 176#------------------------------------------------------------------------- 177 178BINROOT = . 179ROOT = .. 180 181PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib 182PRJLIBNAME = $(PROJECT).$(EXT) 183PRJLIB = $(OUT_DIR)\$(PRJLIBNAME) 184 185PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib 186PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME) 187 188### Make sure we use backslash only. 189PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION) 190LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR) 191BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR) 192DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR) 193SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR) 194INCLUDE_INSTALL_DIR = $(_TCLDIR)\include 195 196### The following paths CANNOT have spaces in them. 197GENERICDIR = $(ROOT)\generic 198WINDIR = $(ROOT)\win 199LIBDIR = $(ROOT)\library 200DOCDIR = $(ROOT)\doc 201TOOLSDIR = $(ROOT)\tools 202COMPATDIR = $(ROOT)\compat 203 204### Figure out where the primary source code file(s) is/are. 205!if exist("$(ROOT)\..\..\sqlite3.c") && exist("$(ROOT)\..\..\src\tclsqlite.c") 206SQL_INCLUDES = -I"$(ROOT)\..\.." 207SQLITE_SRCDIR = $(ROOT)\..\.. 208TCLSQLITE_SRCDIR = $(ROOT)\..\..\src 209DLLOBJS = $(TMP_DIR)\sqlite3.obj $(TMP_DIR)\tclsqlite.obj 210!else 211TCLSQLITE_SRCDIR = $(ROOT)\generic 212DLLOBJS = $(TMP_DIR)\tclsqlite3.obj 213!endif 214 215#--------------------------------------------------------------------- 216# Compile flags 217#--------------------------------------------------------------------- 218 219!if !$(DEBUG) 220!if $(OPTIMIZING) 221### This cranks the optimization level to maximize speed 222cdebug = -O2 -Op -Gs 223!else 224cdebug = 225!endif 226!else if "$(MACHINE)" == "IA64" 227### Warnings are too many, can't support warnings into errors. 228cdebug = -Z7 -Od -GZ 229!else 230cdebug = -Z7 -WX -Od -GZ 231!endif 232 233### Declarations common to all compiler options 234cflags = -nologo -c -W3 -D_CRT_SECURE_NO_WARNINGS -YX -Fp$(TMP_DIR)^\ 235 236!if $(MSVCRT) 237!if $(DEBUG) 238crt = -MDd 239!else 240crt = -MD 241!endif 242!else 243!if $(DEBUG) 244crt = -MTd 245!else 246crt = -MT 247!endif 248!endif 249 250INCLUDES = $(SQL_INCLUDES) $(TCL_INCLUDES) -I"$(WINDIR)" \ 251 -I"$(GENERICDIR)" -I"$(ROOT)\.." 252BASE_CLFAGS = $(cflags) $(cdebug) $(crt) $(INCLUDES) \ 253 -DSQLITE_3_SUFFIX_ONLY=1 -DSQLITE_ENABLE_RTREE=1 \ 254 -DSQLITE_ENABLE_FTS3=1 -DSQLITE_OMIT_DEPRECATED=1 255CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE -DSQLITE_ENABLE_FTS3=1 256TCL_CFLAGS = -DBUILD_sqlite -DUSE_TCL_STUBS \ 257 -DPACKAGE_VERSION="\"$(DOTVERSION)\"" $(BASE_CLFAGS) \ 258 $(OPTDEFINES) 259 260#--------------------------------------------------------------------- 261# Link flags 262#--------------------------------------------------------------------- 263 264!if $(DEBUG) 265ldebug = -debug:full -debugtype:cv 266!else 267ldebug = -release -opt:ref -opt:icf,3 268!endif 269 270### Declarations common to all linker options 271lflags = -nologo -machine:$(MACHINE) $(ldebug) 272 273!if $(PROFILE) 274lflags = $(lflags) -profile 275!endif 276 277!if $(ALIGN98_HACK) && !$(STATIC_BUILD) 278### Align sections for PE size savings. 279lflags = $(lflags) -opt:nowin98 280!else if !$(ALIGN98_HACK) && $(STATIC_BUILD) 281### Align sections for speed in loading by choosing the virtual page size. 282lflags = $(lflags) -align:4096 283!endif 284 285!if $(LOIMPACT) 286lflags = $(lflags) -ws:aggressive 287!endif 288 289dlllflags = $(lflags) -dll 290conlflags = $(lflags) -subsystem:console 291guilflags = $(lflags) -subsystem:windows 292baselibs = $(TCLSTUBLIB) 293 294#--------------------------------------------------------------------- 295# TclTest flags 296#--------------------------------------------------------------------- 297 298!IF "$(TESTPAT)" != "" 299TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT) 300!ENDIF 301 302#--------------------------------------------------------------------- 303# Project specific targets (EDIT) 304#--------------------------------------------------------------------- 305 306all: setup $(PROJECT) 307$(PROJECT): setup $(PRJLIB) 308install: install-binaries install-libraries install-docs 309 310# Tests need to ensure we load the right dll file we 311# have to handle the output differently on Win9x. 312# 313!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE" 314test: setup $(PROJECT) 315 set TCL_LIBRARY=$(ROOT)/library 316 $(TCLSH) << 317load $(PRJLIB:\=/) 318cd "$(ROOT)/tests" 319set argv "$(TESTFLAGS)" 320source all.tcl 321<< 322!else 323test: setup $(PROJECT) 324 echo Please wait while the test results are collected 325 set TCL_LIBRARY=$(ROOT)/library 326 $(TCLSH) << >tests.log 327load $(PRJLIB:\=/) 328cd "$(ROOT)/tests" 329set argv "$(TESTFLAGS)" 330source all.tcl 331<< 332 type tests.log | more 333!endif 334 335setup: 336 @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) 337 @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) 338 339$(PRJLIB): $(DLLOBJS) 340 $(link32) $(dlllflags) -out:$@ $(baselibs) @<< 341$** 342<< 343 -@del $*.exp 344 345$(PRJSTUBLIB): $(PRJSTUBOBJS) 346 $(lib32) -nologo -out:$@ $(PRJSTUBOBJS) 347 348#--------------------------------------------------------------------- 349# Implicit rules 350#--------------------------------------------------------------------- 351 352$(TMP_DIR)\sqlite3.obj: $(SQLITE_SRCDIR)\sqlite3.c 353 $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ \ 354 -c $(SQLITE_SRCDIR)\sqlite3.c 355 356$(TMP_DIR)\tclsqlite.obj: $(TCLSQLITE_SRCDIR)\tclsqlite.c 357 $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ \ 358 -c $(TCLSQLITE_SRCDIR)\tclsqlite.c 359 360$(TMP_DIR)\tclsqlite3.obj: $(TCLSQLITE_SRCDIR)\tclsqlite3.c 361 $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ \ 362 -c $(TCLSQLITE_SRCDIR)\tclsqlite3.c 363 364{$(WINDIR)}.rc{$(TMP_DIR)}.res: 365 $(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \ 366!if $(DEBUG) 367 -d DEBUG \ 368!endif 369!if $(TCL_THREADS) 370 -d TCL_THREADS \ 371!endif 372!if $(STATIC_BUILD) 373 -d STATIC_BUILD \ 374!endif 375 $< 376 377.SUFFIXES: 378.SUFFIXES:.c .rc 379 380#--------------------------------------------------------------------- 381# Installation. (EDIT) 382# 383# You may need to modify this section to reflect the final distribution 384# of your files and possibly to generate documentation. 385# 386#--------------------------------------------------------------------- 387 388install-binaries: 389 @echo Installing binaries to '$(SCRIPT_INSTALL_DIR)' 390 @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)" 391 @$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL 392 393install-libraries: 394 @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)' 395 @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)" 396 @echo Installing package index in '$(SCRIPT_INSTALL_DIR)' 397 @type << >"$(SCRIPT_INSTALL_DIR)\pkgIndex.tcl" 398package ifneeded $(PROJECT) $(DOTVERSION) \ 399 [list load [file join $$dir $(PRJLIBNAME)] sqlite3] 400<< 401 402install-docs: 403 @echo Installing documentation files to '$(DOC_INSTALL_DIR)' 404 @if exist $(DOCDIR) $(CPY) $(DOCDIR)\*.n "$(DOC_INSTALL_DIR)" 405 406#--------------------------------------------------------------------- 407# Clean up 408#--------------------------------------------------------------------- 409 410clean: 411 @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR) 412 @if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc 413 414realclean: clean 415 @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR) 416 417distclean: realclean 418 @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe 419 @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj 420