1# Makefile.in generated by automake 1.15 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2014 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# 18# Copyright (c) 2002 Theodore A. Roth 19# All rights reserved. 20# 21# Redistribution and use in source and binary forms, with or without 22# modification, are permitted provided that the following conditions are met: 23# 24# 1. Redistributions of source code must retain the above copyright 25# notice, this list of conditions and the following disclaimer. 26# 2. Redistributions in binary form must reproduce the above copyright 27# notice, this list of conditions and the following disclaimer in the 28# documentation and/or other materials provided with the distribution. 29# 3. The name of the author may not be used to endorse or promote products 30# derived from this software without specific prior written permission. 31# 32# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 33# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 34# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 35# NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 36# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 37# TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 38# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 39# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 40# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 41# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 42# 43# Author: Theodore A. Roth <troth@verinet.com> 44# 45# Contributors: 46# 47# $Id: Makefile.am 1018 2005-12-31 18:42:02Z joerg_wunsch $ 48# 49VPATH = @srcdir@ 50am__is_gnu_make = { \ 51 if test -z '$(MAKELEVEL)'; then \ 52 false; \ 53 elif test -n '$(MAKE_HOST)'; then \ 54 true; \ 55 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 56 true; \ 57 else \ 58 false; \ 59 fi; \ 60} 61am__make_running_with_option = \ 62 case $${target_option-} in \ 63 ?) ;; \ 64 *) echo "am__make_running_with_option: internal error: invalid" \ 65 "target option '$${target_option-}' specified" >&2; \ 66 exit 1;; \ 67 esac; \ 68 has_opt=no; \ 69 sane_makeflags=$$MAKEFLAGS; \ 70 if $(am__is_gnu_make); then \ 71 sane_makeflags=$$MFLAGS; \ 72 else \ 73 case $$MAKEFLAGS in \ 74 *\\[\ \ ]*) \ 75 bs=\\; \ 76 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 77 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 78 esac; \ 79 fi; \ 80 skip_next=no; \ 81 strip_trailopt () \ 82 { \ 83 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 84 }; \ 85 for flg in $$sane_makeflags; do \ 86 test $$skip_next = yes && { skip_next=no; continue; }; \ 87 case $$flg in \ 88 *=*|--*) continue;; \ 89 -*I) strip_trailopt 'I'; skip_next=yes;; \ 90 -*I?*) strip_trailopt 'I';; \ 91 -*O) strip_trailopt 'O'; skip_next=yes;; \ 92 -*O?*) strip_trailopt 'O';; \ 93 -*l) strip_trailopt 'l'; skip_next=yes;; \ 94 -*l?*) strip_trailopt 'l';; \ 95 -[dEDm]) skip_next=yes;; \ 96 -[JT]) skip_next=yes;; \ 97 esac; \ 98 case $$flg in \ 99 *$$target_option*) has_opt=yes; break;; \ 100 esac; \ 101 done; \ 102 test $$has_opt = yes 103am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 104am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 105pkgdatadir = $(datadir)/@PACKAGE@ 106pkgincludedir = $(includedir)/@PACKAGE@ 107pkglibdir = $(libdir)/@PACKAGE@ 108pkglibexecdir = $(libexecdir)/@PACKAGE@ 109am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 110install_sh_DATA = $(install_sh) -c -m 644 111install_sh_PROGRAM = $(install_sh) -c 112install_sh_SCRIPT = $(install_sh) -c 113INSTALL_HEADER = $(INSTALL_DATA) 114transform = $(program_transform_name) 115NORMAL_INSTALL = : 116PRE_INSTALL = : 117POST_INSTALL = : 118NORMAL_UNINSTALL = : 119PRE_UNINSTALL = : 120POST_UNINSTALL = : 121build_triplet = @build@ 122host_triplet = @host@ 123subdir = doc 124ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 125am__aclocal_m4_deps = $(top_srcdir)/configure.ac 126am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 127 $(ACLOCAL_M4) 128DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) 129mkinstalldirs = $(install_sh) -d 130CONFIG_HEADER = $(top_builddir)/config.h 131CONFIG_CLEAN_FILES = 132CONFIG_CLEAN_VPATH_FILES = 133AM_V_P = $(am__v_P_@AM_V@) 134am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 135am__v_P_0 = false 136am__v_P_1 = : 137AM_V_GEN = $(am__v_GEN_@AM_V@) 138am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 139am__v_GEN_0 = @echo " GEN " $@; 140am__v_GEN_1 = 141AM_V_at = $(am__v_at_@AM_V@) 142am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 143am__v_at_0 = @ 144am__v_at_1 = 145SOURCES = 146DIST_SOURCES = 147RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 148 ctags-recursive dvi-recursive html-recursive info-recursive \ 149 install-data-recursive install-dvi-recursive \ 150 install-exec-recursive install-html-recursive \ 151 install-info-recursive install-pdf-recursive \ 152 install-ps-recursive install-recursive installcheck-recursive \ 153 installdirs-recursive pdf-recursive ps-recursive \ 154 tags-recursive uninstall-recursive 155am__can_run_installinfo = \ 156 case $$AM_UPDATE_INFO_DIR in \ 157 n|no|NO) false;; \ 158 *) (install-info --version) >/dev/null 2>&1;; \ 159 esac 160RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 161 distclean-recursive maintainer-clean-recursive 162am__recursive_targets = \ 163 $(RECURSIVE_TARGETS) \ 164 $(RECURSIVE_CLEAN_TARGETS) \ 165 $(am__extra_recursive_targets) 166AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 167 distdir 168am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) 169# Read a list of newline-separated strings from the standard input, 170# and print each of them once, without duplicates. Input order is 171# *not* preserved. 172am__uniquify_input = $(AWK) '\ 173 BEGIN { nonempty = 0; } \ 174 { items[$$0] = 1; nonempty = 1; } \ 175 END { if (nonempty) { for (i in items) print i; }; } \ 176' 177# Make sure the list of sources is unique. This is necessary because, 178# e.g., the same source file might be shared among _SOURCES variables 179# for different programs/libraries. 180am__define_uniq_tagged_files = \ 181 list='$(am__tagged_files)'; \ 182 unique=`for i in $$list; do \ 183 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 184 done | $(am__uniquify_input)` 185ETAGS = etags 186CTAGS = ctags 187am__DIST_COMMON = $(srcdir)/Makefile.in ChangeLog INSTALL TODO 188DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 189am__relativize = \ 190 dir0=`pwd`; \ 191 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 192 sed_rest='s,^[^/]*/*,,'; \ 193 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 194 sed_butlast='s,/*[^/]*$$,,'; \ 195 while test -n "$$dir1"; do \ 196 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 197 if test "$$first" != "."; then \ 198 if test "$$first" = ".."; then \ 199 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 200 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 201 else \ 202 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 203 if test "$$first2" = "$$first"; then \ 204 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 205 else \ 206 dir2="../$$dir2"; \ 207 fi; \ 208 dir0="$$dir0"/"$$first"; \ 209 fi; \ 210 fi; \ 211 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 212 done; \ 213 reldir="$$dir2" 214ACLOCAL = @ACLOCAL@ 215AMTAR = @AMTAR@ 216AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 217AR = @AR@ 218AS = @AS@ 219ASDEBUG = @ASDEBUG@ 220AUTOCONF = @AUTOCONF@ 221AUTOHEADER = @AUTOHEADER@ 222AUTOMAKE = @AUTOMAKE@ 223AVR_LIBC_MAJOR = @AVR_LIBC_MAJOR@ 224AVR_LIBC_MINOR = @AVR_LIBC_MINOR@ 225AVR_LIBC_RELDATE = @AVR_LIBC_RELDATE@ 226AVR_LIBC_REVISION = @AVR_LIBC_REVISION@ 227AVR_LIBC_USER_MANUAL = @AVR_LIBC_USER_MANUAL@ 228AVR_LIBC_VERSION = @AVR_LIBC_VERSION@ 229AVR_LIBC_VERSION_NUMERIC = @AVR_LIBC_VERSION_NUMERIC@ 230AWK = @AWK@ 231CC = @CC@ 232CCAS = @CCAS@ 233CCASDEPMODE = @CCASDEPMODE@ 234CCASFLAGS = @CCASFLAGS@ 235CCDEPMODE = @CCDEPMODE@ 236CDEBUG = @CDEBUG@ 237CFLAGS = @CFLAGS@ 238CPPFLAGS = @CPPFLAGS@ 239CYGPATH_W = @CYGPATH_W@ 240DEFS = @DEFS@ 241DEPDIR = @DEPDIR@ 242DOCSDIR = @DOCSDIR@ 243DOC_INST_DIR = @DOC_INST_DIR@ 244ECHO_C = @ECHO_C@ 245ECHO_N = @ECHO_N@ 246ECHO_T = @ECHO_T@ 247EXEEXT = @EXEEXT@ 248FNO_JUMP_TABLES = @FNO_JUMP_TABLES@ 249HAS_DELAY_CYCLES = @HAS_DELAY_CYCLES@ 250INSTALL = @INSTALL@ 251INSTALL_DATA = @INSTALL_DATA@ 252INSTALL_DOX_HTML = @INSTALL_DOX_HTML@ 253INSTALL_DOX_MAN = @INSTALL_DOX_MAN@ 254INSTALL_DOX_PDF = @INSTALL_DOX_PDF@ 255INSTALL_PROGRAM = @INSTALL_PROGRAM@ 256INSTALL_SCRIPT = @INSTALL_SCRIPT@ 257INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 258LDFLAGS = @LDFLAGS@ 259LIBOBJS = @LIBOBJS@ 260LIBS = @LIBS@ 261LN_S = @LN_S@ 262LTLIBOBJS = @LTLIBOBJS@ 263MAKEINFO = @MAKEINFO@ 264MKDIR_P = @MKDIR_P@ 265OBJEXT = @OBJEXT@ 266PACKAGE = @PACKAGE@ 267PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 268PACKAGE_NAME = @PACKAGE_NAME@ 269PACKAGE_STRING = @PACKAGE_STRING@ 270PACKAGE_TARNAME = @PACKAGE_TARNAME@ 271PACKAGE_URL = @PACKAGE_URL@ 272PACKAGE_VERSION = @PACKAGE_VERSION@ 273PATH_SEPARATOR = @PATH_SEPARATOR@ 274PNGTOPNM = @PNGTOPNM@ 275PNMTOPNG = @PNMTOPNG@ 276RANLIB = @RANLIB@ 277SET_MAKE = @SET_MAKE@ 278SHELL = @SHELL@ 279STRIP = @STRIP@ 280TARGET_DOX_HTML = @TARGET_DOX_HTML@ 281TARGET_DOX_PDF = @TARGET_DOX_PDF@ 282VERSION = @VERSION@ 283abs_builddir = @abs_builddir@ 284abs_srcdir = @abs_srcdir@ 285abs_top_builddir = @abs_top_builddir@ 286abs_top_srcdir = @abs_top_srcdir@ 287ac_ct_CC = @ac_ct_CC@ 288am__include = @am__include@ 289am__leading_dot = @am__leading_dot@ 290am__quote = @am__quote@ 291am__tar = @am__tar@ 292am__untar = @am__untar@ 293bindir = @bindir@ 294build = @build@ 295build_alias = @build_alias@ 296build_cpu = @build_cpu@ 297build_os = @build_os@ 298build_vendor = @build_vendor@ 299builddir = @builddir@ 300datadir = @datadir@ 301datarootdir = @datarootdir@ 302docdir = @docdir@ 303dvidir = @dvidir@ 304exec_prefix = @exec_prefix@ 305host = @host@ 306host_alias = @host_alias@ 307host_cpu = @host_cpu@ 308host_os = @host_os@ 309host_vendor = @host_vendor@ 310htmldir = @htmldir@ 311includedir = @includedir@ 312infodir = @infodir@ 313install_sh = @install_sh@ 314libdir = @libdir@ 315libexecdir = @libexecdir@ 316localedir = @localedir@ 317localstatedir = @localstatedir@ 318mandir = @mandir@ 319mkdir_p = @mkdir_p@ 320oldincludedir = @oldincludedir@ 321pdfdir = @pdfdir@ 322prefix = @prefix@ 323program_transform_name = @program_transform_name@ 324psdir = @psdir@ 325sbindir = @sbindir@ 326sharedstatedir = @sharedstatedir@ 327srcdir = @srcdir@ 328sysconfdir = @sysconfdir@ 329target_alias = @target_alias@ 330top_build_prefix = @top_build_prefix@ 331top_builddir = @top_builddir@ 332top_srcdir = @top_srcdir@ 333MAINTAINERCLEANFILES = Makefile.in 334SUBDIRS = @DOCSDIR@ 335DIST_SUBDIRS = api 336EXTRA_DIST = CHANGES.old ChangeLog INSTALL TODO 337all: all-recursive 338 339.SUFFIXES: 340$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 341 @for dep in $?; do \ 342 case '$(am__configure_deps)' in \ 343 *$$dep*) \ 344 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ 345 && { if test -f $@; then exit 0; else break; fi; }; \ 346 exit 1;; \ 347 esac; \ 348 done; \ 349 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ 350 $(am__cd) $(top_srcdir) && \ 351 $(AUTOMAKE) --foreign doc/Makefile 352Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 353 @case '$?' in \ 354 *config.status*) \ 355 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ 356 *) \ 357 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ 358 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ 359 esac; 360 361$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 362 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 363 364$(top_srcdir)/configure: $(am__configure_deps) 365 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 366$(ACLOCAL_M4): $(am__aclocal_m4_deps) 367 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 368$(am__aclocal_m4_deps): 369 370# This directory's subdirectories are mostly independent; you can cd 371# into them and run 'make' without going through this Makefile. 372# To change the values of 'make' variables: instead of editing Makefiles, 373# (1) if the variable is set in 'config.status', edit 'config.status' 374# (which will cause the Makefiles to be regenerated when you run 'make'); 375# (2) otherwise, pass the desired values on the 'make' command line. 376$(am__recursive_targets): 377 @fail=; \ 378 if $(am__make_keepgoing); then \ 379 failcom='fail=yes'; \ 380 else \ 381 failcom='exit 1'; \ 382 fi; \ 383 dot_seen=no; \ 384 target=`echo $@ | sed s/-recursive//`; \ 385 case "$@" in \ 386 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 387 *) list='$(SUBDIRS)' ;; \ 388 esac; \ 389 for subdir in $$list; do \ 390 echo "Making $$target in $$subdir"; \ 391 if test "$$subdir" = "."; then \ 392 dot_seen=yes; \ 393 local_target="$$target-am"; \ 394 else \ 395 local_target="$$target"; \ 396 fi; \ 397 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 398 || eval $$failcom; \ 399 done; \ 400 if test "$$dot_seen" = "no"; then \ 401 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 402 fi; test -z "$$fail" 403 404ID: $(am__tagged_files) 405 $(am__define_uniq_tagged_files); mkid -fID $$unique 406tags: tags-recursive 407TAGS: tags 408 409tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 410 set x; \ 411 here=`pwd`; \ 412 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 413 include_option=--etags-include; \ 414 empty_fix=.; \ 415 else \ 416 include_option=--include; \ 417 empty_fix=; \ 418 fi; \ 419 list='$(SUBDIRS)'; for subdir in $$list; do \ 420 if test "$$subdir" = .; then :; else \ 421 test ! -f $$subdir/TAGS || \ 422 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 423 fi; \ 424 done; \ 425 $(am__define_uniq_tagged_files); \ 426 shift; \ 427 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 428 test -n "$$unique" || unique=$$empty_fix; \ 429 if test $$# -gt 0; then \ 430 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 431 "$$@" $$unique; \ 432 else \ 433 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 434 $$unique; \ 435 fi; \ 436 fi 437ctags: ctags-recursive 438 439CTAGS: ctags 440ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 441 $(am__define_uniq_tagged_files); \ 442 test -z "$(CTAGS_ARGS)$$unique" \ 443 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 444 $$unique 445 446GTAGS: 447 here=`$(am__cd) $(top_builddir) && pwd` \ 448 && $(am__cd) $(top_srcdir) \ 449 && gtags -i $(GTAGS_ARGS) "$$here" 450cscopelist: cscopelist-recursive 451 452cscopelist-am: $(am__tagged_files) 453 list='$(am__tagged_files)'; \ 454 case "$(srcdir)" in \ 455 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 456 *) sdir=$(subdir)/$(srcdir) ;; \ 457 esac; \ 458 for i in $$list; do \ 459 if test -f "$$i"; then \ 460 echo "$(subdir)/$$i"; \ 461 else \ 462 echo "$$sdir/$$i"; \ 463 fi; \ 464 done >> $(top_builddir)/cscope.files 465 466distclean-tags: 467 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 468 469distdir: $(DISTFILES) 470 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 471 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 472 list='$(DISTFILES)'; \ 473 dist_files=`for file in $$list; do echo $$file; done | \ 474 sed -e "s|^$$srcdirstrip/||;t" \ 475 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 476 case $$dist_files in \ 477 */*) $(MKDIR_P) `echo "$$dist_files" | \ 478 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 479 sort -u` ;; \ 480 esac; \ 481 for file in $$dist_files; do \ 482 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 483 if test -d $$d/$$file; then \ 484 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 485 if test -d "$(distdir)/$$file"; then \ 486 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 487 fi; \ 488 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 489 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 490 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 491 fi; \ 492 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 493 else \ 494 test -f "$(distdir)/$$file" \ 495 || cp -p $$d/$$file "$(distdir)/$$file" \ 496 || exit 1; \ 497 fi; \ 498 done 499 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 500 if test "$$subdir" = .; then :; else \ 501 $(am__make_dryrun) \ 502 || test -d "$(distdir)/$$subdir" \ 503 || $(MKDIR_P) "$(distdir)/$$subdir" \ 504 || exit 1; \ 505 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 506 $(am__relativize); \ 507 new_distdir=$$reldir; \ 508 dir1=$$subdir; dir2="$(top_distdir)"; \ 509 $(am__relativize); \ 510 new_top_distdir=$$reldir; \ 511 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 512 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 513 ($(am__cd) $$subdir && \ 514 $(MAKE) $(AM_MAKEFLAGS) \ 515 top_distdir="$$new_top_distdir" \ 516 distdir="$$new_distdir" \ 517 am__remove_distdir=: \ 518 am__skip_length_check=: \ 519 am__skip_mode_fix=: \ 520 distdir) \ 521 || exit 1; \ 522 fi; \ 523 done 524check-am: all-am 525check: check-recursive 526all-am: Makefile 527installdirs: installdirs-recursive 528installdirs-am: 529install: install-recursive 530install-exec: install-exec-recursive 531install-data: install-data-recursive 532uninstall: uninstall-recursive 533 534install-am: all-am 535 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 536 537installcheck: installcheck-recursive 538install-strip: 539 if test -z '$(STRIP)'; then \ 540 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 541 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 542 install; \ 543 else \ 544 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 545 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 546 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 547 fi 548mostlyclean-generic: 549 550clean-generic: 551 552distclean-generic: 553 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 554 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 555 556maintainer-clean-generic: 557 @echo "This command is intended for maintainers to use" 558 @echo "it deletes files that may require special tools to rebuild." 559 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 560clean: clean-recursive 561 562clean-am: clean-generic mostlyclean-am 563 564distclean: distclean-recursive 565 -rm -f Makefile 566distclean-am: clean-am distclean-generic distclean-tags 567 568dvi: dvi-recursive 569 570dvi-am: 571 572html: html-recursive 573 574html-am: 575 576info: info-recursive 577 578info-am: 579 580install-data-am: 581 582install-dvi: install-dvi-recursive 583 584install-dvi-am: 585 586install-exec-am: 587 588install-html: install-html-recursive 589 590install-html-am: 591 592install-info: install-info-recursive 593 594install-info-am: 595 596install-man: 597 598install-pdf: install-pdf-recursive 599 600install-pdf-am: 601 602install-ps: install-ps-recursive 603 604install-ps-am: 605 606installcheck-am: 607 608maintainer-clean: maintainer-clean-recursive 609 -rm -f Makefile 610maintainer-clean-am: distclean-am maintainer-clean-generic 611 612mostlyclean: mostlyclean-recursive 613 614mostlyclean-am: mostlyclean-generic 615 616pdf: pdf-recursive 617 618pdf-am: 619 620ps: ps-recursive 621 622ps-am: 623 624uninstall-am: 625 626.MAKE: $(am__recursive_targets) install-am install-strip 627 628.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ 629 check-am clean clean-generic cscopelist-am ctags ctags-am \ 630 distclean distclean-generic distclean-tags distdir dvi dvi-am \ 631 html html-am info info-am install install-am install-data \ 632 install-data-am install-dvi install-dvi-am install-exec \ 633 install-exec-am install-html install-html-am install-info \ 634 install-info-am install-man install-pdf install-pdf-am \ 635 install-ps install-ps-am install-strip installcheck \ 636 installcheck-am installdirs installdirs-am maintainer-clean \ 637 maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ 638 pdf-am ps ps-am tags tags-am uninstall uninstall-am 639 640.PRECIOUS: Makefile 641 642 643# Tell versions [3.59,3.63) of GNU make to not export all variables. 644# Otherwise a system limit (for SysV at least) may be exceeded. 645.NOEXPORT: 646