1## Process this file with automake to generate Makefile.in 2# 3# Copyright (C) 2012-2021 Free Software Foundation, Inc. 4# 5# This file is free software; you can redistribute it and/or modify 6# it under the terms of the GNU General Public License as published by 7# the Free Software Foundation; either version 3 of the License, or 8# (at your option) any later version. 9# 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY; without even the implied warranty of 12# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13# GNU General Public License for more details. 14# 15# You should have received a copy of the GNU General Public License 16# along with this program; see the file COPYING3. If not see 17# <http://www.gnu.org/licenses/>. 18# 19 20AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects 21ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd 22 23SUBDIRS = doc po 24 25tooldir = $(exec_prefix)/$(target_alias) 26 27## These aren't set by automake, because they appear in 28## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and 29## thus is not seen by automake. 30CC_FOR_BUILD = @CC_FOR_BUILD@ 31EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@ 32 33YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi` 34YFLAGS = -d 35LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi` 36LEXLIB = @LEXLIB@ 37 38# Automake 1.10+ disables lex and yacc output file regeneration if 39# maintainer mode is disabled. Avoid this. 40am__skiplex = 41am__skipyacc = 42 43# This is where we get zlib from. zlibdir is -L../zlib and zlibinc is 44# -I../zlib, unless we were configured with --with-system-zlib, in which 45# case both are empty. 46ZLIB = @zlibdir@ -lz 47ZLIBINC = @zlibinc@ 48 49WARN_CFLAGS = @WARN_CFLAGS@ 50WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@ 51NO_WERROR = @NO_WERROR@ 52AM_CFLAGS = $(WARN_CFLAGS) $(ZLIBINC) 53AM_CFLAGS_FOR_BUILD = $(WARN_CFLAGS_FOR_BUILD) $(ZLIBINC) 54LIBICONV = @LIBICONV@ 55 56DEBUGINFOD_LIBS = @DEBUGINFOD_LIBS@ 57 58# these two are almost the same program 59AR_PROG=ar 60RANLIB_PROG=ranlib 61 62# objcopy and strip should be the same program 63OBJCOPY_PROG=objcopy 64STRIP_PROG=strip-new 65 66STRINGS_PROG=strings 67 68READELF_PROG=readelf 69 70ELFEDIT_PROG=elfedit 71 72# These should all be the same program too. 73SIZE_PROG=size 74NM_PROG=nm-new 75OBJDUMP_PROG=objdump 76 77# This is the demangler, as a standalone program. 78# Note: This one is used as the installed name too, unlike the above. 79DEMANGLER_PROG=cxxfilt 80 81ADDR2LINE_PROG=addr2line 82 83DLLTOOL_PROG=dlltool 84WINDRES_PROG=windres 85WINDMC_PROG=windmc 86DLLWRAP_PROG=dllwrap 87 88SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT) 89 90bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@ 91 92bin_SCRIPTS = @BUILD_INSTALL_MISC@ 93EXTRA_SCRIPTS = embedspu 94 95## Test programs. 96BFDTEST1_PROG = bfdtest1 97BFDTEST2_PROG = bfdtest2 98GENTESTDLLS_PROG = testsuite/gentestdlls 99 100TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG) $(GENTESTDLLS_PROG) 101 102## We need a special rule to install the programs which are built with 103## -new, and to rename cxxfilt to c++filt. 104RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG) 105noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@ 106 107EXTRA_PROGRAMS = srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG) 108 109# Stuff that goes in tooldir/ if appropriate. 110TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy readelf 111 112BASEDIR = $(srcdir)/.. 113BFDDIR = $(BASEDIR)/bfd 114INCDIR = $(BASEDIR)/include 115 116AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \ 117 @HDEFINES@ \ 118 @INCINTL@ \ 119 @LARGEFILE_CPPFLAGS@ \ 120 -DLOCALEDIR="\"$(datadir)/locale\"" \ 121 -Dbin_dummy_emulation=$(EMULATION_VECTOR) 122 123HFILES = \ 124 arsup.h binemul.h bucomm.h budbg.h \ 125 coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h \ 126 objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \ 127 windmc.h 128 129GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h 130BUILT_SOURCES = $(GENERATED_HFILES) 131 132CFILES = \ 133 addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \ 134 coffdump.c coffgrok.c cxxfilt.c \ 135 dwarf.c debug.c dlltool.c dllwrap.c \ 136 elfcomm.c emul_aix.c emul_vanilla.c filemode.c \ 137 is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \ 138 nm.c not-ranlib.c not-strip.c \ 139 objcopy.c objdump.c prdbg.c \ 140 od-elf32_avr.c od-macho.c od-xcoff.c \ 141 rclex.c rdcoff.c rddbg.c readelf.c rename.c \ 142 resbin.c rescoff.c resrc.c resres.c \ 143 size.c srconv.c stabs.c strings.c sysdump.c \ 144 syslex_wrap.c unwind-ia64.c elfedit.c version.c \ 145 windres.c winduni.c wrstabs.c \ 146 windmc.c mclex.c 147 148GENERATED_CFILES = \ 149 arparse.c arlex.c sysroff.c sysinfo.c syslex.c \ 150 defparse.c deflex.c rcparse.c mcparse.c 151 152DEBUG_SRCS = rddbg.c debug.c stabs.c rdcoff.c 153WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c 154 155# Extra object files for objdump 156OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@ 157 158# Code shared by all the binutils. 159BULIBS = bucomm.c version.c filemode.c 160 161# Code shared by the ELF related programs. 162ELFLIBS = elfcomm.c 163 164BFDLIB = ../bfd/libbfd.la 165 166OPCODES = ../opcodes/libopcodes.la 167 168if ENABLE_LIBCTF 169LIBCTF = ../libctf/libctf.la 170LIBCTF_NOBFD = ../libctf/libctf-nobfd.la 171else 172LIBCTF = 173LIBCTF_NOBFD = 174endif 175 176LIBIBERTY = ../libiberty/libiberty.a 177 178POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES) 179po/POTFILES.in: @MAINT@ Makefile 180 for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \ 181 && mv tmp $(srcdir)/po/POTFILES.in 182 183EXPECT = expect 184RUNTEST = runtest 185 186CC_FOR_TARGET = ` \ 187 if [ -f $$r/../gcc/xgcc ] ; then \ 188 if [ -f $$r/../newlib/Makefile ] ; then \ 189 echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \ 190 else \ 191 echo $$r/../gcc/xgcc -B$$r/../gcc/; \ 192 fi; \ 193 else \ 194 if [ "@host@" = "@target@" ] ; then \ 195 echo $(CC); \ 196 else \ 197 echo gcc | sed '$(transform)'; \ 198 fi; \ 199 fi` 200 201check-DEJAGNU: site.exp 202 srcdir=`cd $(srcdir) && pwd`; export srcdir; \ 203 r=`pwd`; export r; \ 204 LC_ALL=C; export LC_ALL; \ 205 EXPECT=$(EXPECT); export EXPECT; \ 206 runtest=$(RUNTEST); \ 207 if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ 208 CC="$(CC)" CC_FOR_BUILD="$(CC_FOR_BUILD)" \ 209 CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \ 210 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \ 211 $(RUNTESTFLAGS); \ 212 else echo "WARNING: could not find \`runtest'" 1>&2; :;\ 213 fi 214 215development.exp: $(BFDDIR)/development.sh 216 $(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh \ 217 | $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@ 218 219installcheck-local: 220 /bin/sh $(srcdir)/sanity.sh $(bindir) 221 222# There's no global DEPENDENCIES. So, we must explicitly list everything 223# which depends on libintl, since we don't know whether LIBINTL_DEP will be 224# non-empty until configure time. Ugh! 225size_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 226objdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(LIBCTF) $(OBJDUMP_PRIVATE_OFILES) 227nm_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 228ar_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 229strings_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 230strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 231ranlib_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 232cxxfilt_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 233objcopy_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 234srconv_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 235sysdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 236coffdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 237dlltool_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 238windres_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 239windmc_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 240addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 241readelf_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(LIBCTF_NOBFD) 242elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) 243dllwrap_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) 244bfdtest1_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 245bfdtest2_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 246 247LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL) 248 249size_SOURCES = size.c $(BULIBS) 250 251objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) 252 253strings_SOURCES = strings.c $(BULIBS) 254 255readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS) 256readelf_LDADD = $(LIBCTF_NOBFD) $(LIBINTL) $(LIBIBERTY) $(ZLIB) $(DEBUGINFOD_LIBS) 257 258elfedit_SOURCES = elfedit.c version.c $(ELFLIBS) 259elfedit_LDADD = $(LIBINTL) $(LIBIBERTY) 260 261strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) 262 263nm_new_SOURCES = nm.c $(BULIBS) 264 265objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS) 266EXTRA_objdump_SOURCES = od-xcoff.c 267objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(LIBCTF) $(BFDLIB) $(LIBIBERTY) $(LIBINTL) $(DEBUGINFOD_LIBS) 268 269objdump.@OBJEXT@:objdump.c 270if am__fastdepCC 271 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c 272 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 273else 274if AMDEP 275 source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@ 276 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 277endif 278 $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c 279endif 280 281cxxfilt_SOURCES = cxxfilt.c $(BULIBS) 282 283ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \ 284 emul_$(EMULATION).c $(BULIBS) 285EXTRA_ar_SOURCES = $(CFILES) 286ar_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) 287 288ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \ 289 binemul.c emul_$(EMULATION).c $(BULIBS) 290ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) 291 292addr2line_SOURCES = addr2line.c $(BULIBS) 293 294# The following is commented out for the conversion to automake. 295# This rule creates a single binary that switches between ar and ranlib 296# by looking at argv[0]. Use this kludge to save some disk space. 297# However, you have to install things by hand. 298# (That is after 'make install', replace the installed ranlib by a link to ar.) 299# Alternatively, you can install ranlib.sh as ranlib. 300# ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o 301# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS) 302# -rm -f $(RANLIB_PROG) 303# -ln $(AR_PROG) $(RANLIB_PROG) 304# 305# objcopy and strip in one binary that uses argv[0] to decide its action. 306# 307#objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o 308# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS) 309# -rm -f $(STRIP_PROG) 310# -ln $(OBJCOPY_PROG) $(STRIP_PROG) 311 312sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info 313 ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c 314 ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c 315 ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c 316 317sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info 318 ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h 319 320sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@ 321 $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@ 322 323syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h 324 $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c 325 326sysinfo.@OBJEXT@: sysinfo.c 327 if [ -r sysinfo.c ]; then \ 328 $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \ 329 else \ 330 $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \ 331 fi 332 333bin2c$(EXEEXT_FOR_BUILD): bin2c.c 334 $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c 335 336embedspu: embedspu.sh Makefile 337 awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@ 338 chmod a+x $@ 339 340# We need these for parallel make. 341sysinfo.h: sysinfo.c 342 343# Disable -Werror, if it has been enabled, since old versions of bison/ 344# yacc will produce working code which contain compile time warnings. 345arparse.@OBJEXT@: arparse.c 346if am__fastdepCC 347 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR) 348 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 349else 350if AMDEP 351 source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ 352 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 353endif 354 $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR) 355endif 356 357arlex.@OBJEXT@: arlex.c 358if am__fastdepCC 359 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR) 360 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 361else 362if AMDEP 363 source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@ 364 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 365endif 366 $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR) 367endif 368 369sysroff.@OBJEXT@: sysroff.c 370if am__fastdepCC 371 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR) 372 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 373else 374if AMDEP 375 source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@ 376 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 377endif 378 $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR) 379endif 380 381defparse.@OBJEXT@: defparse.c 382if am__fastdepCC 383 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR) 384 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 385else 386if AMDEP 387 source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ 388 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 389endif 390 $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR) 391endif 392 393deflex.@OBJEXT@: deflex.c 394if am__fastdepCC 395 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR) 396 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 397else 398if AMDEP 399 source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@ 400 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 401endif 402 $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR) 403endif 404 405rcparse.@OBJEXT@: rcparse.c 406if am__fastdepCC 407 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR) 408 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 409else 410if AMDEP 411 source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ 412 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 413endif 414 $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR) 415endif 416 417mcparse.@OBJEXT@: mcparse.c 418if am__fastdepCC 419 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR) 420 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 421else 422if AMDEP 423 source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ 424 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 425endif 426 $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR) 427endif 428 429rclex.@OBJEXT@: rclex.c 430if am__fastdepCC 431 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR) 432 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 433else 434if AMDEP 435 source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@ 436 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 437endif 438 $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR) 439endif 440 441mclex.@OBJEXT@: mclex.c 442if am__fastdepCC 443 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR) 444 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 445else 446if AMDEP 447 source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@ 448 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 449endif 450 $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR) 451endif 452 453srconv_SOURCES = srconv.c coffgrok.c $(BULIBS) 454srconv.@OBJEXT@: sysroff.c 455 456dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS) 457dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) 458 459dlltool.@OBJEXT@: 460if am__fastdepCC 461 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c 462 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 463else 464if AMDEP 465 source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@ 466 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 467endif 468 $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c 469endif 470 471rescoff.@OBJEXT@: 472if am__fastdepCC 473 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c 474 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 475else 476if AMDEP 477 source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@ 478 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 479endif 480 $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c 481endif 482 483coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS) 484 485sysdump_SOURCES = sysdump.c $(BULIBS) 486sysdump.@OBJEXT@: sysroff.c 487 488windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \ 489 winduni.c resres.c $(BULIBS) 490windres_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV) 491 492windmc_SOURCES = windmc.c mcparse.y mclex.c \ 493 winduni.c $(BULIBS) 494windmc_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV) 495 496dllwrap_SOURCES = dllwrap.c version.c 497dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL) 498 499 500EXTRA_DIST = arparse.c arparse.h arlex.c sysinfo.c sysinfo.h \ 501 syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \ 502 mcparse.h mcparse.c embedspu.sh 503 504diststuff: $(EXTRA_DIST) info 505all: info 506 507# development.sh is used to determine -Werror default. 508CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/development.sh 509 510EXTRA_DEJAGNU_SITE_CONFIG = development.exp 511 512DISTCLEANFILES = sysroff.c sysroff.h site.exp development.exp \ 513 site.bak embedspu 514 515MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \ 516 binutils.log binutils.sum abcdefgh* 517mostlyclean-local: 518 -rm -rf tmpdir 519 520.PHONY: install-exec-local 521 522install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS) 523 @list='$(RENAMED_PROGS)'; for p in $$list; do \ 524 if test -f $$p$(EXEEXT); then \ 525 echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ 526 $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ 527 else :; fi; \ 528 done 529 $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin 530 for i in $(TOOL_PROGS); do \ 531 if [ -f $$i$(EXEEXT) ]; then \ 532 j=`echo $$i | sed -e 's/-new//'`; \ 533 k=`echo $$j | sed '$(transform)'`; \ 534 if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \ 535 rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \ 536 ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \ 537 || $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \ 538 fi; \ 539 else true; \ 540 fi; \ 541 done 542