1 /* Definitions for remote debugging interface for ROM monitors.
2    Copyright 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000
3    Free Software Foundation, Inc.
4    Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
5 
6    This file is part of GDB.
7 
8    This program is free software; you can redistribute it and/or modify
9    it under the terms of the GNU General Public License as published by
10    the Free Software Foundation; either version 2 of the License, or
11    (at your option) any later version.
12 
13    This program is distributed in the hope that it will be useful,
14    but WITHOUT ANY WARRANTY; without even the implied warranty of
15    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16    GNU General Public License for more details.
17 
18    You should have received a copy of the GNU General Public License
19    along with this program; if not, write to the Free Software
20    Foundation, Inc., 59 Temple Place - Suite 330,
21    Boston, MA 02111-1307, USA.
22  */
23 
24 #ifndef MONITOR_H
25 #define MONITOR_H
26 
27 struct target_waitstatus;
28 struct serial;
29 
30 /* This structure describes the strings necessary to give small command
31    sequences to the monitor, and parse the response.
32 
33    CMD is the actual command typed at the monitor.  Usually this has
34    embedded sequences ala printf, which are substituted with the
35    arguments appropriate to that type of command.  Ie: to examine a
36    register, we substitute the register name for the first arg.  To
37    modify memory, we substitute the memory location and the new
38    contents for the first and second args, etc...
39 
40    RESP_DELIM used to home in on the response string, and is used to
41    disambiguate the answer within the pile of text returned by the
42    monitor.  This should be a unique string that immediately precedes
43    the answer.  Ie: if your monitor prints out `PC: 00000001= ' in
44    response to asking for the PC, you should use `: ' as the
45    RESP_DELIM.  RESP_DELIM may be NULL if the res- ponse is going to
46    be ignored, or has no particular leading text.
47 
48    TERM is the string that the monitor outputs to indicate that it is
49    idle, and waiting for input.  This is usually a prompt of some
50    sort.  In the previous example, it would be `= '.  It is important
51    that TERM really means that the monitor is idle, otherwise GDB may
52    try to type at it when it isn't ready for input.  This is a problem
53    because many monitors cannot deal with type-ahead.  TERM may be
54    NULL if the normal prompt is output.
55 
56    TERM_CMD is used to quit out of the subcommand mode and get back to
57    the main prompt.  TERM_CMD may be NULL if it isn't necessary.  It
58    will also be ignored if TERM is NULL.  */
59 
60 struct memrw_cmd
61   {
62     char *cmdb;			/* Command to send for byte read/write */
63     char *cmdw;			/* Command for word (16 bit) read/write */
64     char *cmdl;			/* Command for long (32 bit) read/write */
65     char *cmdll;		/* Command for long long (64 bit) read/write */
66     char *resp_delim;		/* String just prior to the desired value */
67     char *term;			/* Terminating string to search for */
68     char *term_cmd;		/* String to get out of sub-mode (if necessary) */
69   };
70 
71 struct regrw_cmd
72   {
73     char *cmd;			/* Command to send for reg read/write */
74     char *resp_delim;		/* String (actually a regexp if getmem) just
75 				   prior to the desired value */
76     char *term;			/* Terminating string to search for */
77     char *term_cmd;		/* String to get out of sub-mode (if necessary) */
78   };
79 
80 struct monitor_ops
81   {
82     int flags;			/* See below */
83     char **init;		/* List of init commands.  NULL terminated. */
84     char *cont;			/* continue command */
85     char *step;			/* single step */
86     char *stop;			/* Interrupt program string */
87     char *set_break;		/* set a breakpoint. If NULL, monitor implementation
88 				   sets its own to_insert_breakpoint method. */
89     char *clr_break;		/* clear a breakpoint */
90     char *clr_all_break;	/* Clear all breakpoints */
91     char *fill;			/* Memory fill cmd (addr len val) */
92     struct memrw_cmd setmem;	/* set memory to a value */
93     struct memrw_cmd getmem;	/* display memory */
94     struct regrw_cmd setreg;	/* set a register */
95     struct regrw_cmd getreg;	/* get a register */
96     /* Some commands can dump a bunch of registers
97        at once.  This comes as a set of REG=VAL
98        pairs.  This should be called for each pair
99        of registers that we can parse to supply
100        GDB with the value of a register.  */
101     char *dump_registers;	/* Command to dump all regs at once */
102     char *register_pattern;	/* Pattern that picks out register from reg dump */
103     void (*supply_register) (char *name, int namelen, char *val, int vallen);
104     void (*load_routine) (struct serial *desc, char *file,
105 			  int hashmark);	/* Download routine */
106     int (*dumpregs) (void);	/* routine to dump all registers */
107     int (*continue_hook) (void);	/* Emit the continue command */
108     int (*wait_filter) (char *buf,	/* Maybe contains registers */
109 			int bufmax,
110 			int *response_length,
111 			struct target_waitstatus * status);
112     char *load;			/* load command */
113     char *loadresp;		/* Response to load command */
114     char *prompt;		/* monitor command prompt */
115     char *line_term;		/* end-of-command delimitor */
116     char *cmd_end;		/* optional command terminator */
117     struct target_ops *target;	/* target operations */
118     int stopbits;		/* number of stop bits */
119     char **regnames;		/* array of register names in ascii */
120                                 /* deprecated: use regname instead */
121     const char *(*regname) (int index);
122                                 /* function for dynamic regname array */
123     int num_breakpoints;	/* If set_break != NULL, number of supported
124 				   breakpoints */
125     int magic;			/* Check value */
126   };
127 
128 /* The monitor ops magic number, used to detect if an ops structure doesn't
129    have the right number of entries filled in. */
130 
131 #define MONITOR_OPS_MAGIC 600925
132 
133 /* Flag definitions. */
134 
135 /* If set, then clear breakpoint command uses address, otherwise it
136    uses an index returned by the monitor.  */
137 
138 #define MO_CLR_BREAK_USES_ADDR 0x1
139 
140 /* If set, then memory fill command uses STARTADDR, ENDADDR+1, VALUE
141    as args, else it uses STARTADDR, LENGTH, VALUE as args. */
142 
143 #define MO_FILL_USES_ADDR 0x2
144 
145 /* If set, then monitor doesn't automatically supply register dump
146    when coming back after a continue.  */
147 
148 #define MO_NEED_REGDUMP_AFTER_CONT 0x4
149 
150 /* getmem needs start addr and end addr */
151 
152 #define MO_GETMEM_NEEDS_RANGE 0x8
153 
154 /* getmem can only read one loc at a time */
155 
156 #define MO_GETMEM_READ_SINGLE 0x10
157 
158 /* handle \r\n combinations */
159 
160 #define MO_HANDLE_NL 0x20
161 
162 /* don't expect echos in monitor_open */
163 
164 #define MO_NO_ECHO_ON_OPEN 0x40
165 
166 /* If set, send break to stop monitor */
167 
168 #define MO_SEND_BREAK_ON_STOP 0x80
169 
170 /* If set, target sends an ACK after each S-record */
171 
172 #define MO_SREC_ACK 0x100
173 
174 /* Allow 0x prefix on addresses retured from monitor */
175 
176 #define MO_HEX_PREFIX 0x200
177 
178 /* Some monitors require a different command when starting a program */
179 
180 #define MO_RUN_FIRST_TIME 0x400
181 
182 /* Don't expect echos when getting memory */
183 
184 #define MO_NO_ECHO_ON_SETMEM 0x800
185 
186 /* If set, then register store command expects value BEFORE regname */
187 
188 #define MO_REGISTER_VALUE_FIRST 0x1000
189 
190 /* If set, then the monitor displays registers as pairs.  */
191 
192 #define MO_32_REGS_PAIRED 0x2000
193 
194 /* If set, then register setting happens interactively.  */
195 
196 #define MO_SETREG_INTERACTIVE 0x4000
197 
198 /* If set, then memory setting happens interactively.  */
199 
200 #define MO_SETMEM_INTERACTIVE 0x8000
201 
202 /* If set, then memory dumps are always on 16-byte boundaries, even
203    when less is desired.  */
204 
205 #define MO_GETMEM_16_BOUNDARY 0x10000
206 
207 /* If set, then the monitor numbers its breakpoints starting from 1.  */
208 
209 #define MO_CLR_BREAK_1_BASED 0x20000
210 
211 /* If set, then the monitor acks srecords with a plus sign.  */
212 
213 #define MO_SREC_ACK_PLUS 0x40000
214 
215 /* If set, then the monitor "acks" srecords with rotating lines.  */
216 
217 #define MO_SREC_ACK_ROTATE 0x80000
218 
219 /* If set, then remove useless address bits from memory addresses.  */
220 
221 #define MO_ADDR_BITS_REMOVE 0x100000
222 
223 /* If set, then display target program output if prefixed by ^O.  */
224 
225 #define MO_PRINT_PROGRAM_OUTPUT 0x200000
226 
227 /* Some dump bytes commands align the first data with the preceeding
228    16 byte boundary. Some print blanks and start at the exactly the
229    requested boundary. */
230 
231 #define MO_EXACT_DUMPADDR 0x400000
232 
233 /* Rather entering and exiting the write memory dialog for each word byte,
234    we can save time by transferring the whole block without exiting
235    the memory editing mode. You only need to worry about this
236    if you are doing memory downloading.
237    This engages a new write function registered with dcache.
238  */
239 #define MO_HAS_BLOCKWRITES 0x800000
240 
241 #define SREC_SIZE 160
242 
243 extern void monitor_open (char *args, struct monitor_ops *ops, int from_tty);
244 extern void monitor_close (int quitting);
245 extern char *monitor_supply_register (int regno, char *valstr);
246 extern int monitor_expect (char *prompt, char *buf, int buflen);
247 extern int monitor_expect_prompt (char *buf, int buflen);
248 /* Note: The variable argument functions monitor_printf and
249    monitor_printf_noecho vararg do not take take standard format style
250    arguments.  Instead they take custom formats interpretered directly
251    by monitor_vsprintf.  */
252 extern void monitor_printf (char *, ...);
253 extern void monitor_printf_noecho (char *, ...);
254 extern void monitor_write (char *buf, int buflen);
255 extern int monitor_readchar (void);
256 extern char *monitor_get_dev_name (void);
257 extern void init_monitor_ops (struct target_ops *);
258 extern int monitor_dump_reg_block (char *dump_cmd);
259 
260 #endif
261