1 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 /*
3 * This file is part of the LibreOffice project.
4 *
5 * This Source Code Form is subject to the terms of the Mozilla Public
6 * License, v. 2.0. If a copy of the MPL was not distributed with this
7 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 *
9 * This file incorporates work covered by the following license notice:
10 *
11 * Licensed to the Apache Software Foundation (ASF) under one or more
12 * contributor license agreements. See the NOTICE file distributed
13 * with this work for additional information regarding copyright
14 * ownership. The ASF licenses this file to you under the Apache
15 * License, Version 2.0 (the "License"); you may not use this file
16 * except in compliance with the License. You may obtain a copy of
17 * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 */
19
20 #include <tools/urlobj.hxx>
21 #include <vcl/svapp.hxx>
22 #include <vcl/weld.hxx>
23 #include <unotools/pathoptions.hxx>
24 #include <sfx2/filedlghelper.hxx>
25 #include <com/sun/star/ui/dialogs/TemplateDescription.hpp>
26
27 #include <strings.hrc>
28
29 #include <svx/xlineit0.hxx>
30 #include <svx/xlnwtit.hxx>
31 #include <svx/xlndsit.hxx>
32 #include <svx/xlnclit.hxx>
33 #include <svx/xtable.hxx>
34
35 #include <svx/dlgctrl.hxx>
36 #include <cuitabline.hxx>
37 #include <defdlgname.hxx>
38 #include <svx/svxdlg.hxx>
39 #include <dialmgr.hxx>
40 #include <svx/dlgutil.hxx>
41 #include <svx/dialmgr.hxx>
42 #include <svx/strings.hrc>
43 #include <svx/svxids.hrc>
44 #include <cuitabarea.hxx>
45 #include <svtools/unitconv.hxx>
46 #include <osl/diagnose.h>
47
48 #define XOUT_WIDTH 150
49
50 using namespace com::sun::star;
51
52
SvxLineDefTabPage(weld::Container * pPage,weld::DialogController * pController,const SfxItemSet & rInAttrs)53 SvxLineDefTabPage::SvxLineDefTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs)
54 : SfxTabPage(pPage, pController, "cui/ui/linestyletabpage.ui", "LineStylePage", &rInAttrs)
55 , rOutAttrs(rInAttrs)
56 , aXLineAttr(rInAttrs.GetPool())
57 , rXLSet(aXLineAttr.GetItemSet())
58 , pnDashListState(nullptr)
59 , pPageType(nullptr)
60 , nDlgType(0)
61 , pPosDashLb(nullptr)
62 , m_xLbLineStyles(new SvxLineLB(m_xBuilder->weld_combo_box("LB_LINESTYLES")))
63 , m_xLbType1(m_xBuilder->weld_combo_box("LB_TYPE_1"))
64 , m_xLbType2(m_xBuilder->weld_combo_box("LB_TYPE_2"))
65 , m_xNumFldNumber1(m_xBuilder->weld_spin_button("NUM_FLD_1"))
66 , m_xNumFldNumber2(m_xBuilder->weld_spin_button("NUM_FLD_2"))
67 , m_xMtrLength1(m_xBuilder->weld_metric_spin_button("MTR_FLD_LENGTH_1", FieldUnit::CM))
68 , m_xMtrLength2(m_xBuilder->weld_metric_spin_button("MTR_FLD_LENGTH_2", FieldUnit::CM))
69 , m_xMtrDistance(m_xBuilder->weld_metric_spin_button("MTR_FLD_DISTANCE", FieldUnit::CM))
70 , m_xCbxSynchronize(m_xBuilder->weld_check_button("CBX_SYNCHRONIZE"))
71 , m_xBtnAdd(m_xBuilder->weld_button("BTN_ADD"))
72 , m_xBtnModify(m_xBuilder->weld_button("BTN_MODIFY"))
73 , m_xBtnDelete(m_xBuilder->weld_button("BTN_DELETE"))
74 , m_xBtnLoad(m_xBuilder->weld_button("BTN_LOAD"))
75 , m_xBtnSave(m_xBuilder->weld_button("BTN_SAVE"))
76 , m_xCtlPreview(new weld::CustomWeld(*m_xBuilder, "CTL_PREVIEW", m_aCtlPreview))
77 {
78 // this page needs ExchangeSupport
79 SetExchangeSupport();
80
81 // adjust metric
82 eFUnit = GetModuleFieldUnit( rInAttrs );
83
84 switch ( eFUnit )
85 {
86 case FieldUnit::M:
87 case FieldUnit::KM:
88 eFUnit = FieldUnit::MM;
89 break;
90 default: ; //prevent warning
91 }
92 SetFieldUnit(*m_xMtrDistance, eFUnit);
93 SetFieldUnit(*m_xMtrLength1, eFUnit);
94 SetFieldUnit(*m_xMtrLength2, eFUnit);
95
96 // determine PoolUnit
97 SfxItemPool* pPool = rOutAttrs.GetPool();
98 DBG_ASSERT( pPool, "Where is the pool?" );
99 ePoolUnit = pPool->GetMetric( SID_ATTR_LINE_WIDTH );
100
101 rXLSet.Put( XLineStyleItem(drawing::LineStyle_DASH) );
102 rXLSet.Put( XLineWidthItem(XOUT_WIDTH) );
103 rXLSet.Put( XLineDashItem( OUString(), XDash( css::drawing::DashStyle_RECT, 3, 7, 2, 40, 15 ) ) );
104 rXLSet.Put( XLineColorItem(OUString(), COL_BLACK) );
105
106 // #i34740#
107 m_aCtlPreview.SetLineAttributes(aXLineAttr.GetItemSet());
108
109 m_xBtnAdd->connect_clicked(LINK(this, SvxLineDefTabPage, ClickAddHdl_Impl));
110 m_xBtnModify->connect_clicked(LINK(this, SvxLineDefTabPage, ClickModifyHdl_Impl));
111 m_xBtnDelete->connect_clicked(LINK(this, SvxLineDefTabPage, ClickDeleteHdl_Impl));
112 m_xBtnLoad->connect_clicked(LINK(this, SvxLineDefTabPage, ClickLoadHdl_Impl));
113 m_xBtnSave->connect_clicked(LINK(this, SvxLineDefTabPage, ClickSaveHdl_Impl));
114
115 m_xNumFldNumber1->connect_value_changed(LINK(this, SvxLineDefTabPage, ChangeNumber1Hdl_Impl));
116 m_xNumFldNumber2->connect_value_changed(LINK(this, SvxLineDefTabPage, ChangeNumber2Hdl_Impl));
117 m_xLbLineStyles->connect_changed(LINK(this, SvxLineDefTabPage, SelectLinestyleListBoxHdl_Impl));
118
119 // #i122042# switch off default adding of 'none' and 'solid' entries
120 // for this ListBox; we want to select only editable/dashed styles
121 m_xLbLineStyles->setAddStandardFields(false);
122
123 // absolute (in mm) or relative (in %)
124 m_xCbxSynchronize->connect_toggled(LINK(this, SvxLineDefTabPage, ChangeMetricHdl_Impl));
125
126 // preview must be updated when there's something changed
127 Link<weld::ComboBox&, void> aLink = LINK(this, SvxLineDefTabPage, SelectTypeListBoxHdl_Impl);
128 m_xLbType1->connect_changed(aLink);
129 m_xLbType2->connect_changed(aLink);
130 Link<weld::MetricSpinButton&,void> aLink2 = LINK( this, SvxLineDefTabPage, ChangePreviewHdl_Impl );
131 m_xMtrLength1->connect_value_changed(aLink2);
132 m_xMtrLength2->connect_value_changed(aLink2);
133 m_xMtrDistance->connect_value_changed(aLink2);
134
135 pDashList = nullptr;
136 }
137
~SvxLineDefTabPage()138 SvxLineDefTabPage::~SvxLineDefTabPage()
139 {
140 m_xCtlPreview.reset();
141 m_xLbLineStyles.reset();
142 }
143
Construct()144 void SvxLineDefTabPage::Construct()
145 {
146 // Line style fill; do *not* add default fields here
147 m_xLbLineStyles->Fill( pDashList );
148 }
149
ActivatePage(const SfxItemSet &)150 void SvxLineDefTabPage::ActivatePage( const SfxItemSet& )
151 {
152 if( nDlgType != 0 ) // area dialog
153 return;
154
155 // ActivatePage() is called before the dialog receives PageCreated() !!!
156 if( !pDashList.is() )
157 return;
158
159 if (*pPageType == PageType::Gradient &&
160 *pPosDashLb != -1)
161 {
162 m_xLbLineStyles->set_active(*pPosDashLb);
163 }
164 // so that a possibly existing line style is discarded
165 SelectLinestyleHdl_Impl( nullptr );
166
167 // determining (and possibly cutting) the name
168 // and displaying it in the GroupBox
169 // OUString aString( CuiResId( RID_SVXSTR_TABLE ) );
170 // aString += ": ";
171 INetURLObject aURL( pDashList->GetPath() );
172
173 aURL.Append( pDashList->GetName() );
174 DBG_ASSERT( aURL.GetProtocol() != INetProtocol::NotValid, "invalid URL" );
175
176 *pPageType = PageType::Area; // 2
177 *pPosDashLb = -1;
178 }
179
180
DeactivatePage(SfxItemSet * _pSet)181 DeactivateRC SvxLineDefTabPage::DeactivatePage( SfxItemSet* _pSet )
182 {
183 CheckChanges_Impl();
184
185 if( _pSet )
186 FillItemSet( _pSet );
187
188 return DeactivateRC::LeavePage;
189 }
190
CheckChanges_Impl()191 void SvxLineDefTabPage::CheckChanges_Impl()
192 {
193 // is here used to NOT lose changes
194 //css::drawing::DashStyle eXDS;
195
196 if( m_xNumFldNumber1->get_value_changed_from_saved() ||
197 m_xMtrLength1->get_value_changed_from_saved() ||
198 m_xLbType1->get_value_changed_from_saved() ||
199 m_xNumFldNumber2->get_value_changed_from_saved() ||
200 m_xMtrLength2->get_value_changed_from_saved() ||
201 m_xLbType2->get_value_changed_from_saved() ||
202 m_xMtrDistance->get_value_changed_from_saved() )
203 {
204 std::unique_ptr<weld::MessageDialog> xMessDlg(Application::CreateMessageDialog(GetFrameWeld(),
205 VclMessageType::Warning, VclButtonsType::Cancel,
206 CuiResId(RID_SVXSTR_ASK_CHANGE_LINESTYLE)));
207 xMessDlg->set_title(SvxResId(RID_SVXSTR_LINESTYLE));
208 xMessDlg->add_button(CuiResId(RID_SVXSTR_CHANGE), RET_BTN_1);
209 xMessDlg->add_button(CuiResId(RID_SVXSTR_ADD), RET_BTN_2);
210
211 short nRet = xMessDlg->run();
212
213 switch( nRet )
214 {
215 case RET_BTN_1:
216 {
217 ClickModifyHdl_Impl(*m_xBtnModify);
218 }
219 break;
220
221 case RET_BTN_2:
222 {
223 ClickAddHdl_Impl(*m_xBtnAdd);
224 }
225 break;
226
227 case RET_CANCEL:
228 break;
229 }
230 }
231
232 int nPos = m_xLbLineStyles->get_active();
233 if (nPos != -1)
234 {
235 *pPosDashLb = nPos;
236 }
237 }
238
239
FillItemSet(SfxItemSet * rAttrs)240 bool SvxLineDefTabPage::FillItemSet( SfxItemSet* rAttrs )
241 {
242 if( nDlgType == 0 ) // line dialog
243 {
244 if( *pPageType == PageType::Hatch )
245 {
246 FillDash_Impl();
247
248 OUString aString(m_xLbLineStyles->get_active_text());
249 rAttrs->Put( XLineStyleItem( drawing::LineStyle_DASH ) );
250 rAttrs->Put( XLineDashItem( aString, aDash ) );
251 }
252 }
253 return true;
254 }
255
256
Reset(const SfxItemSet * rAttrs)257 void SvxLineDefTabPage::Reset( const SfxItemSet* rAttrs )
258 {
259 if( rAttrs->GetItemState( GetWhich( XATTR_LINESTYLE ) ) != SfxItemState::DONTCARE )
260 {
261 drawing::LineStyle eXLS = static_cast<const XLineStyleItem&>( rAttrs->Get( GetWhich( XATTR_LINESTYLE ) ) ).GetValue();
262
263 switch( eXLS )
264 {
265 case drawing::LineStyle_NONE:
266 case drawing::LineStyle_SOLID:
267 m_xLbLineStyles->set_active(0);
268 break;
269 case drawing::LineStyle_DASH:
270 {
271 const XLineDashItem& rDashItem = rAttrs->Get( XATTR_LINEDASH );
272 aDash = rDashItem.GetDashValue();
273
274 m_xLbLineStyles->set_active(-1);
275 m_xLbLineStyles->set_active_text(rDashItem.GetName());
276 break;
277 }
278 default:
279 break;
280 }
281 }
282 SelectLinestyleHdl_Impl( nullptr );
283
284 // determine button state
285 if( pDashList->Count() )
286 {
287 m_xBtnModify->set_sensitive(true);
288 m_xBtnDelete->set_sensitive(true);
289 m_xBtnSave->set_sensitive(true);
290 }
291 else
292 {
293 m_xBtnModify->set_sensitive(false);
294 m_xBtnDelete->set_sensitive(false);
295 m_xBtnSave->set_sensitive(false);
296 }
297 }
298
Create(weld::Container * pPage,weld::DialogController * pController,const SfxItemSet * rOutAttrs)299 std::unique_ptr<SfxTabPage> SvxLineDefTabPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rOutAttrs )
300 {
301 return std::make_unique<SvxLineDefTabPage>(pPage, pController, *rOutAttrs);
302 }
303
IMPL_LINK(SvxLineDefTabPage,SelectLinestyleListBoxHdl_Impl,weld::ComboBox &,rListBox,void)304 IMPL_LINK(SvxLineDefTabPage, SelectLinestyleListBoxHdl_Impl, weld::ComboBox&, rListBox, void)
305 {
306 SelectLinestyleHdl_Impl(&rListBox);
307 }
308
SelectLinestyleHdl_Impl(const weld::ComboBox * p)309 void SvxLineDefTabPage::SelectLinestyleHdl_Impl(const weld::ComboBox* p)
310 {
311 if(!pDashList->Count())
312 return;
313
314 int nTmp = m_xLbLineStyles->get_active();
315 if (nTmp == -1)
316 {
317 OSL_ENSURE(false, "OOps, non-existent LineDash selected (!)");
318 nTmp = 1;
319 }
320
321 aDash = pDashList->GetDash( nTmp )->GetDash();
322
323 FillDialog_Impl();
324
325 rXLSet.Put( XLineDashItem( OUString(), aDash ) );
326
327 // #i34740#
328 m_aCtlPreview.SetLineAttributes(aXLineAttr.GetItemSet());
329 m_aCtlPreview.Invalidate();
330
331 // Is not set before, in order to take the new style
332 // only if there was an entry selected in the ListBox.
333 // If it was called via Reset(), then p is == NULL
334 if( p )
335 *pPageType = PageType::Hatch;
336 }
337
IMPL_LINK_NOARG(SvxLineDefTabPage,ChangePreviewHdl_Impl,weld::MetricSpinButton &,void)338 IMPL_LINK_NOARG(SvxLineDefTabPage, ChangePreviewHdl_Impl, weld::MetricSpinButton&, void)
339 {
340 FillDash_Impl();
341 m_aCtlPreview.Invalidate();
342 }
343
IMPL_LINK_NOARG(SvxLineDefTabPage,ChangeNumber1Hdl_Impl,weld::SpinButton &,void)344 IMPL_LINK_NOARG(SvxLineDefTabPage, ChangeNumber1Hdl_Impl, weld::SpinButton&, void)
345 {
346 if (m_xNumFldNumber1->get_value() == 0)
347 {
348 m_xNumFldNumber2->set_min(1);
349 }
350 else
351 {
352 m_xNumFldNumber2->set_min(0);
353 }
354
355 ChangePreviewHdl_Impl(*m_xMtrLength1);
356 }
357
IMPL_LINK_NOARG(SvxLineDefTabPage,ChangeNumber2Hdl_Impl,weld::SpinButton &,void)358 IMPL_LINK_NOARG(SvxLineDefTabPage, ChangeNumber2Hdl_Impl, weld::SpinButton&, void)
359 {
360 if (m_xNumFldNumber2->get_value() == 0)
361 {
362 m_xNumFldNumber1->set_min(1);
363 }
364 else
365 {
366 m_xNumFldNumber1->set_min(0);
367 }
368
369 ChangePreviewHdl_Impl(*m_xMtrLength1);
370 }
371
IMPL_LINK(SvxLineDefTabPage,ChangeMetricHdl_Impl,weld::Toggleable &,r,void)372 IMPL_LINK( SvxLineDefTabPage, ChangeMetricHdl_Impl, weld::Toggleable&, r, void)
373 {
374 ChangeMetricHdl_Impl(&r);
375 }
376
ChangeMetricHdl_Impl(const weld::Toggleable * p)377 void SvxLineDefTabPage::ChangeMetricHdl_Impl(const weld::Toggleable* p)
378 {
379 if( !m_xCbxSynchronize->get_active() && m_xMtrLength1->get_unit() != eFUnit )
380 {
381 tools::Long nTmp1, nTmp2, nTmp3;
382
383 // was changed with Control
384 if( p )
385 {
386 nTmp1 = GetCoreValue( *m_xMtrLength1, ePoolUnit ) * XOUT_WIDTH / 100;
387 nTmp2 = GetCoreValue( *m_xMtrLength2, ePoolUnit ) * XOUT_WIDTH / 100;
388 nTmp3 = GetCoreValue( *m_xMtrDistance, ePoolUnit ) * XOUT_WIDTH / 100;
389 }
390 else
391 {
392 nTmp1 = GetCoreValue( *m_xMtrLength1, ePoolUnit );
393 nTmp2 = GetCoreValue( *m_xMtrLength2, ePoolUnit );
394 nTmp3 = GetCoreValue( *m_xMtrDistance, ePoolUnit );
395 }
396 m_xMtrLength1->set_digits(2);
397 m_xMtrLength2->set_digits(2);
398 m_xMtrDistance->set_digits(2);
399
400 // adjust metric
401 m_xMtrLength1->set_unit(eFUnit);
402 m_xMtrLength2->set_unit(eFUnit);
403 m_xMtrDistance->set_unit(eFUnit);
404
405 // tdf#126736 max 5cm
406 m_xMtrLength1->set_range(0, 500, FieldUnit::CM);
407 m_xMtrLength2->set_range(0, 500, FieldUnit::CM);
408 m_xMtrDistance->set_range(0, 500, FieldUnit::CM);
409
410 SetMetricValue( *m_xMtrLength1, nTmp1, ePoolUnit );
411 SetMetricValue( *m_xMtrLength2, nTmp2, ePoolUnit );
412 SetMetricValue( *m_xMtrDistance, nTmp3, ePoolUnit );
413 }
414 else if( m_xCbxSynchronize->get_active() && m_xMtrLength1->get_unit() != FieldUnit::PERCENT )
415 {
416 tools::Long nTmp1, nTmp2, nTmp3;
417
418 // was changed with Control
419 if( p )
420 {
421 nTmp1 = GetCoreValue( *m_xMtrLength1, ePoolUnit ) * 100 / XOUT_WIDTH;
422 nTmp2 = GetCoreValue( *m_xMtrLength2, ePoolUnit ) * 100 / XOUT_WIDTH;
423 nTmp3 = GetCoreValue( *m_xMtrDistance, ePoolUnit ) * 100 / XOUT_WIDTH;
424 }
425 else
426 {
427 nTmp1 = GetCoreValue( *m_xMtrLength1, ePoolUnit );
428 nTmp2 = GetCoreValue( *m_xMtrLength2, ePoolUnit );
429 nTmp3 = GetCoreValue( *m_xMtrDistance, ePoolUnit );
430 }
431
432 m_xMtrLength1->set_digits(0);
433 m_xMtrLength2->set_digits(0);
434 m_xMtrDistance->set_digits(0);
435
436 m_xMtrLength1->set_unit(FieldUnit::PERCENT);
437 m_xMtrLength2->set_unit(FieldUnit::PERCENT);
438 m_xMtrDistance->set_unit(FieldUnit::PERCENT);
439
440 // tdf#126736 800%
441 m_xMtrLength1->set_range(0, 800, FieldUnit::PERCENT);
442 m_xMtrLength2->set_range(0, 800, FieldUnit::PERCENT);
443 m_xMtrDistance->set_range(0, 800, FieldUnit::PERCENT);
444
445 m_xMtrLength1->set_value(nTmp1, FieldUnit::PERCENT);
446 m_xMtrLength2->set_value(nTmp2, FieldUnit::PERCENT);
447 m_xMtrDistance->set_value(nTmp3, FieldUnit::PERCENT);
448 }
449 SelectTypeHdl_Impl( nullptr );
450 }
451
IMPL_LINK(SvxLineDefTabPage,SelectTypeListBoxHdl_Impl,weld::ComboBox &,rListBox,void)452 IMPL_LINK( SvxLineDefTabPage, SelectTypeListBoxHdl_Impl, weld::ComboBox&, rListBox, void )
453 {
454 SelectTypeHdl_Impl(&rListBox);
455 }
456
SelectTypeHdl_Impl(const weld::ComboBox * p)457 void SvxLineDefTabPage::SelectTypeHdl_Impl(const weld::ComboBox* p)
458 {
459 if (p == m_xLbType1.get() || !p)
460 {
461 if (m_xLbType1->get_active() == 0)
462 {
463 m_xMtrLength1->set_sensitive(false);
464 m_xMtrLength1->set_text("");
465 }
466 else if (!m_xMtrLength1->get_sensitive())
467 {
468 m_xMtrLength1->set_sensitive(true);
469 m_xMtrLength1->reformat();
470 }
471 }
472
473 if (p == m_xLbType2.get() || !p)
474 {
475 if (m_xLbType2->get_active() == 0)
476 {
477 m_xMtrLength2->set_sensitive(false);
478 m_xMtrLength2->set_text("");
479 }
480 else if (!m_xMtrLength2->get_sensitive())
481 {
482 m_xMtrLength2->set_sensitive(true);
483 m_xMtrLength2->reformat();
484 }
485 }
486 ChangePreviewHdl_Impl(*m_xMtrLength1);
487 }
488
IMPL_LINK_NOARG(SvxLineDefTabPage,ClickAddHdl_Impl,weld::Button &,void)489 IMPL_LINK_NOARG(SvxLineDefTabPage, ClickAddHdl_Impl, weld::Button&, void)
490 {
491 OUString aNewName(SvxResId(RID_SVXSTR_LINESTYLE));
492 OUString aDesc(CuiResId(RID_SVXSTR_DESC_LINESTYLE));
493 OUString aName;
494
495 tools::Long nCount = pDashList->Count();
496 tools::Long j = 1;
497 bool bDifferent = false;
498
499 while ( !bDifferent )
500 {
501 aName = aNewName + " " + OUString::number( j++ );
502 bDifferent = true;
503
504 for ( tools::Long i = 0; i < nCount && bDifferent; i++ )
505 if ( aName == pDashList->GetDash( i )->GetName() )
506 bDifferent = false;
507 }
508
509 SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
510 ScopedVclPtr<AbstractSvxNameDialog> pDlg(pFact->CreateSvxNameDialog(GetFrameWeld(), aName, aDesc));
511 bool bLoop = true;
512
513 while ( bLoop && pDlg->Execute() == RET_OK )
514 {
515 pDlg->GetName( aName );
516 bDifferent = true;
517
518 for( tools::Long i = 0; i < nCount && bDifferent; i++ )
519 {
520 if( aName == pDashList->GetDash( i )->GetName() )
521 bDifferent = false;
522 }
523
524 if( bDifferent )
525 {
526 bLoop = false;
527 FillDash_Impl();
528
529 tools::Long nDashCount = pDashList->Count();
530 pDashList->Insert( std::make_unique<XDashEntry>(aDash, aName), nDashCount );
531 m_xLbLineStyles->Append( *pDashList->GetDash(nDashCount), pDashList->GetUiBitmap(nDashCount) );
532
533 m_xLbLineStyles->set_active(m_xLbLineStyles->get_count() - 1);
534
535 *pnDashListState |= ChangeType::MODIFIED;
536
537 *pPageType = PageType::Hatch;
538
539 // save values for changes recognition (-> method)
540 m_xNumFldNumber1->save_value();
541 m_xMtrLength1->save_value();
542 m_xLbType1->save_value();
543 m_xNumFldNumber2->save_value();
544 m_xMtrLength2->save_value();
545 m_xLbType2->save_value();
546 m_xMtrDistance->save_value();
547 }
548 else
549 {
550 std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/queryduplicatedialog.ui"));
551 std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog("DuplicateNameDialog"));
552 xBox->run();
553 }
554 }
555 pDlg.disposeAndClear();
556
557 // determine button state
558 if ( pDashList->Count() )
559 {
560 m_xBtnModify->set_sensitive(true);
561 m_xBtnDelete->set_sensitive(true);
562 m_xBtnSave->set_sensitive(true);
563 }
564 }
565
IMPL_LINK_NOARG(SvxLineDefTabPage,ClickModifyHdl_Impl,weld::Button &,void)566 IMPL_LINK_NOARG(SvxLineDefTabPage, ClickModifyHdl_Impl, weld::Button&, void)
567 {
568 int nPos = m_xLbLineStyles->get_active();
569 if (nPos == -1)
570 return;
571
572 OUString aDesc(CuiResId(RID_SVXSTR_DESC_LINESTYLE));
573 OUString aName( pDashList->GetDash( nPos )->GetName() );
574 OUString aOldName = aName;
575
576 SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
577 ScopedVclPtr<AbstractSvxNameDialog> pDlg(pFact->CreateSvxNameDialog(GetFrameWeld(), aName, aDesc));
578
579 tools::Long nCount = pDashList->Count();
580 bool bLoop = true;
581
582 while ( bLoop && pDlg->Execute() == RET_OK )
583 {
584 pDlg->GetName( aName );
585 bool bDifferent = true;
586
587 for( tools::Long i = 0; i < nCount && bDifferent; i++ )
588 {
589 if( aName == pDashList->GetDash( i )->GetName() &&
590 aName != aOldName )
591 bDifferent = false;
592 }
593
594 if ( bDifferent )
595 {
596 bLoop = false;
597 FillDash_Impl();
598
599 pDashList->Replace(std::make_unique<XDashEntry>(aDash, aName), nPos);
600 m_xLbLineStyles->Modify(*pDashList->GetDash(nPos), nPos, pDashList->GetUiBitmap(nPos));
601
602 m_xLbLineStyles->set_active(nPos);
603
604 *pnDashListState |= ChangeType::MODIFIED;
605
606 *pPageType = PageType::Hatch;
607
608 // save values for changes recognition (-> method)
609 m_xNumFldNumber1->save_value();
610 m_xMtrLength1->save_value();
611 m_xLbType1->save_value();
612 m_xNumFldNumber2->save_value();
613 m_xMtrLength2->save_value();
614 m_xLbType2->save_value();
615 m_xMtrDistance->save_value();
616 }
617 else
618 {
619 std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/queryduplicatedialog.ui"));
620 std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog("DuplicateNameDialog"));
621 xBox->run();
622 }
623 }
624 }
625
IMPL_LINK_NOARG(SvxLineDefTabPage,ClickDeleteHdl_Impl,weld::Button &,void)626 IMPL_LINK_NOARG(SvxLineDefTabPage, ClickDeleteHdl_Impl, weld::Button&, void)
627 {
628 int nPos = m_xLbLineStyles->get_active();
629 if (nPos != -1)
630 {
631 std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/querydeletelinestyledialog.ui"));
632 std::unique_ptr<weld::MessageDialog> xQueryBox(xBuilder->weld_message_dialog("AskDelLineStyleDialog"));
633 if (xQueryBox->run() == RET_YES)
634 {
635 pDashList->Remove(nPos);
636 m_xLbLineStyles->remove(nPos);
637 m_xLbLineStyles->set_active(0);
638
639 SelectLinestyleHdl_Impl( nullptr );
640 *pPageType = PageType::Area; // style should not be taken
641
642 *pnDashListState |= ChangeType::MODIFIED;
643
644 ChangePreviewHdl_Impl( *m_xMtrLength1 );
645 }
646 }
647
648 // determine button state
649 if ( !pDashList->Count() )
650 {
651 m_xBtnModify->set_sensitive(false);
652 m_xBtnDelete->set_sensitive(false);
653 m_xBtnSave->set_sensitive(false);
654 }
655 }
656
IMPL_LINK_NOARG(SvxLineDefTabPage,ClickLoadHdl_Impl,weld::Button &,void)657 IMPL_LINK_NOARG(SvxLineDefTabPage, ClickLoadHdl_Impl, weld::Button&, void)
658 {
659 sal_uInt16 nReturn = RET_YES;
660
661 if ( *pnDashListState & ChangeType::MODIFIED )
662 {
663 std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/querysavelistdialog.ui"));
664 std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog("AskSaveList"));
665
666 nReturn = xBox->run();
667
668 if ( nReturn == RET_YES )
669 pDashList->Save();
670 }
671
672 if ( nReturn != RET_CANCEL )
673 {
674 ::sfx2::FileDialogHelper aDlg(css::ui::dialogs::TemplateDescription::FILEOPEN_SIMPLE,
675 FileDialogFlags::NONE, GetFrameWeld());
676 OUString aStrFilterType( "*.sod" );
677 aDlg.AddFilter( aStrFilterType, aStrFilterType );
678 OUString aPalettePath(SvtPathOptions().GetPalettePath());
679 OUString aLastDir;
680 sal_Int32 nIndex = 0;
681 do
682 {
683 aLastDir = aPalettePath.getToken(0, ';', nIndex);
684 }
685 while (nIndex >= 0);
686
687 INetURLObject aFile(aLastDir);
688 aDlg.SetDisplayDirectory( aFile.GetMainURL( INetURLObject::DecodeMechanism::NONE ) );
689
690 if( aDlg.Execute() == ERRCODE_NONE )
691 {
692 INetURLObject aURL( aDlg.GetPath() );
693 INetURLObject aPathURL( aURL );
694
695 aPathURL.removeSegment();
696 aPathURL.removeFinalSlash();
697
698 XDashListRef pDshLst = XPropertyList::AsDashList(XPropertyList::CreatePropertyList( XPropertyListType::Dash, aPathURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ), "" ));
699 pDshLst->SetName( aURL.getName() );
700
701 if( pDshLst->Load() )
702 {
703 pDashList = pDshLst;
704 static_cast<SvxLineTabDialog*>(GetDialogController())->SetNewDashList( pDashList );
705
706 m_xLbLineStyles->clear();
707 m_xLbLineStyles->Fill( pDashList );
708 Reset( &rOutAttrs );
709
710 pDashList->SetName( aURL.getName() );
711
712 *pnDashListState |= ChangeType::CHANGED;
713 *pnDashListState &= ~ChangeType::MODIFIED;
714 }
715 else
716 {
717 std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/querynoloadedfiledialog.ui"));
718 std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog("NoLoadedFileDialog"));
719 xBox->run();
720 }
721 }
722 }
723
724 // determine button state
725 if ( pDashList->Count() )
726 {
727 m_xBtnModify->set_sensitive(true);
728 m_xBtnDelete->set_sensitive(true);
729 m_xBtnSave->set_sensitive(true);
730 }
731 else
732 {
733 m_xBtnModify->set_sensitive(false);
734 m_xBtnDelete->set_sensitive(false);
735 m_xBtnSave->set_sensitive(false);
736 }
737 }
738
IMPL_LINK_NOARG(SvxLineDefTabPage,ClickSaveHdl_Impl,weld::Button &,void)739 IMPL_LINK_NOARG(SvxLineDefTabPage, ClickSaveHdl_Impl, weld::Button&, void)
740 {
741 ::sfx2::FileDialogHelper aDlg(css::ui::dialogs::TemplateDescription::FILESAVE_SIMPLE, FileDialogFlags::NONE, GetFrameWeld());
742 OUString aStrFilterType( "*.sod" );
743 aDlg.AddFilter( aStrFilterType, aStrFilterType );
744
745 OUString aPalettePath(SvtPathOptions().GetPalettePath());
746 OUString aLastDir;
747 sal_Int32 nIndex = 0;
748 do
749 {
750 aLastDir = aPalettePath.getToken(0, ';', nIndex);
751 }
752 while (nIndex >= 0);
753
754 INetURLObject aFile(aLastDir);
755 DBG_ASSERT( aFile.GetProtocol() != INetProtocol::NotValid, "invalid URL" );
756
757 if( !pDashList->GetName().isEmpty() )
758 {
759 aFile.Append( pDashList->GetName() );
760
761 if( aFile.getExtension().isEmpty() )
762 aFile.SetExtension( u"sod" );
763 }
764
765 aDlg.SetDisplayDirectory( aFile.GetMainURL( INetURLObject::DecodeMechanism::NONE ) );
766 if ( aDlg.Execute() != ERRCODE_NONE )
767 return;
768
769 INetURLObject aURL( aDlg.GetPath() );
770 INetURLObject aPathURL( aURL );
771
772 aPathURL.removeSegment();
773 aPathURL.removeFinalSlash();
774
775 pDashList->SetName( aURL.getName() );
776 pDashList->SetPath( aPathURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ) );
777
778 if( pDashList->Save() )
779 {
780 *pnDashListState &= ~ChangeType::MODIFIED;
781 }
782 else
783 {
784 std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/querynosavefiledialog.ui"));
785 std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog("NoSaveFileDialog"));
786 xBox->run();
787 }
788 }
789
FillDash_Impl()790 void SvxLineDefTabPage::FillDash_Impl()
791 {
792 css::drawing::DashStyle eXDS;
793
794 if (m_xCbxSynchronize->get_active())
795 eXDS = css::drawing::DashStyle_RECTRELATIVE;
796 else
797 eXDS = css::drawing::DashStyle_RECT;
798
799 aDash.SetDashStyle( eXDS );
800 aDash.SetDots( static_cast<sal_uInt8>(m_xNumFldNumber1->get_value()) );
801 aDash.SetDotLen( m_xLbType1->get_active() == 0 ? 0 : GetCoreValue( *m_xMtrLength1, ePoolUnit ) );
802 aDash.SetDashes( static_cast<sal_uInt8>(m_xNumFldNumber2->get_value()) );
803 aDash.SetDashLen( m_xLbType2->get_active() == 0 ? 0 : GetCoreValue( *m_xMtrLength2, ePoolUnit ) );
804 aDash.SetDistance( GetCoreValue( *m_xMtrDistance, ePoolUnit ) );
805
806 rXLSet.Put( XLineDashItem( OUString(), aDash ) );
807
808 // #i34740#
809 m_aCtlPreview.SetLineAttributes(aXLineAttr.GetItemSet());
810 }
811
FillDialog_Impl()812 void SvxLineDefTabPage::FillDialog_Impl()
813 {
814 css::drawing::DashStyle eXDS = aDash.GetDashStyle(); // css::drawing::DashStyle_RECT, css::drawing::DashStyle_ROUND
815 if( eXDS == css::drawing::DashStyle_RECTRELATIVE )
816 m_xCbxSynchronize->set_active(true);
817 else
818 m_xCbxSynchronize->set_active(false);
819
820 m_xNumFldNumber1->set_value(aDash.GetDots());
821 SetMetricValue( *m_xMtrLength1, aDash.GetDotLen(), ePoolUnit );
822 m_xLbType1->set_active(aDash.GetDotLen() == 0 ? 0 : 1);
823 m_xNumFldNumber2->set_value(aDash.GetDashes());
824 SetMetricValue( *m_xMtrLength2, aDash.GetDashLen(), ePoolUnit );
825 m_xLbType2->set_active(aDash.GetDashLen() == 0 ? 0 : 1);
826 SetMetricValue( *m_xMtrDistance, aDash.GetDistance(), ePoolUnit );
827
828 ChangeMetricHdl_Impl(nullptr);
829
830 // save values for changes recognition (-> method)
831 m_xNumFldNumber1->save_value();
832 m_xMtrLength1->save_value();
833 m_xLbType1->save_value();
834 m_xNumFldNumber2->save_value();
835 m_xMtrLength2->save_value();
836 m_xLbType2->save_value();
837 m_xMtrDistance->save_value();
838 }
839
840 /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
841