1/*
2 * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
3 * Author(s): Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
4 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 *  a) This file is free software; you can redistribute it and/or
11 *     modify it under the terms of the GNU General Public License as
12 *     published by the Free Software Foundation; either version 2 of the
13 *     License, or (at your option) any later version.
14 *
15 *     This file is distributed in the hope that it will be useful,
16 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
17 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18 *     GNU General Public License for more details.
19 *
20 * Or, alternatively,
21 *
22 *  b) Permission is hereby granted, free of charge, to any person
23 *     obtaining a copy of this software and associated documentation
24 *     files (the "Software"), to deal in the Software without
25 *     restriction, including without limitation the rights to use,
26 *     copy, modify, merge, publish, distribute, sublicense, and/or
27 *     sell copies of the Software, and to permit persons to whom the
28 *     Software is furnished to do so, subject to the following
29 *     conditions:
30 *
31 *     The above copyright notice and this permission notice shall be
32 *     included in all copies or substantial portions of the Software.
33 *
34 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 *     OTHER DEALINGS IN THE SOFTWARE.
42 */
43
44#include <dt-bindings/pinctrl/stm32-pinfunc.h>
45#include <dt-bindings/mfd/stm32f4-rcc.h>
46
47/ {
48	soc {
49		pinctrl: pin-controller {
50			#address-cells = <1>;
51			#size-cells = <1>;
52			ranges = <0 0x40020000 0x3000>;
53			interrupt-parent = <&exti>;
54			st,syscfg = <&syscfg 0x8>;
55			pins-are-numbered;
56
57			gpioa: gpio@40020000 {
58				gpio-controller;
59				#gpio-cells = <2>;
60				interrupt-controller;
61				#interrupt-cells = <2>;
62				reg = <0x0 0x400>;
63				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
64				st,bank-name = "GPIOA";
65			};
66
67			gpiob: gpio@40020400 {
68				gpio-controller;
69				#gpio-cells = <2>;
70				interrupt-controller;
71				#interrupt-cells = <2>;
72				reg = <0x400 0x400>;
73				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
74				st,bank-name = "GPIOB";
75			};
76
77			gpioc: gpio@40020800 {
78				gpio-controller;
79				#gpio-cells = <2>;
80				interrupt-controller;
81				#interrupt-cells = <2>;
82				reg = <0x800 0x400>;
83				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
84				st,bank-name = "GPIOC";
85			};
86
87			gpiod: gpio@40020c00 {
88				gpio-controller;
89				#gpio-cells = <2>;
90				interrupt-controller;
91				#interrupt-cells = <2>;
92				reg = <0xc00 0x400>;
93				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
94				st,bank-name = "GPIOD";
95			};
96
97			gpioe: gpio@40021000 {
98				gpio-controller;
99				#gpio-cells = <2>;
100				interrupt-controller;
101				#interrupt-cells = <2>;
102				reg = <0x1000 0x400>;
103				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
104				st,bank-name = "GPIOE";
105			};
106
107			gpiof: gpio@40021400 {
108				gpio-controller;
109				#gpio-cells = <2>;
110				interrupt-controller;
111				#interrupt-cells = <2>;
112				reg = <0x1400 0x400>;
113				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
114				st,bank-name = "GPIOF";
115			};
116
117			gpiog: gpio@40021800 {
118				gpio-controller;
119				#gpio-cells = <2>;
120				interrupt-controller;
121				#interrupt-cells = <2>;
122				reg = <0x1800 0x400>;
123				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
124				st,bank-name = "GPIOG";
125			};
126
127			gpioh: gpio@40021c00 {
128				gpio-controller;
129				#gpio-cells = <2>;
130				interrupt-controller;
131				#interrupt-cells = <2>;
132				reg = <0x1c00 0x400>;
133				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
134				st,bank-name = "GPIOH";
135			};
136
137			gpioi: gpio@40022000 {
138				gpio-controller;
139				#gpio-cells = <2>;
140				interrupt-controller;
141				#interrupt-cells = <2>;
142				reg = <0x2000 0x400>;
143				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
144				st,bank-name = "GPIOI";
145			};
146
147			gpioj: gpio@40022400 {
148				gpio-controller;
149				#gpio-cells = <2>;
150				interrupt-controller;
151				#interrupt-cells = <2>;
152				reg = <0x2400 0x400>;
153				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
154				st,bank-name = "GPIOJ";
155			};
156
157			gpiok: gpio@40022800 {
158				gpio-controller;
159				#gpio-cells = <2>;
160				interrupt-controller;
161				#interrupt-cells = <2>;
162				reg = <0x2800 0x400>;
163				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
164				st,bank-name = "GPIOK";
165			};
166
167			usart1_pins_a: usart1@0 {
168				pins1 {
169					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
170					bias-disable;
171					drive-push-pull;
172					slew-rate = <0>;
173				};
174				pins2 {
175					pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
176					bias-disable;
177				};
178			};
179
180			usart3_pins_a: usart3@0 {
181				pins1 {
182					pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
183					bias-disable;
184					drive-push-pull;
185					slew-rate = <0>;
186				};
187				pins2 {
188					pinmux = <STM32_PINMUX('B', 11, AF7)>; /* USART3_RX */
189					bias-disable;
190				};
191			};
192
193			usbotg_fs_pins_a: usbotg_fs@0 {
194				pins {
195					pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
196						 <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
197						 <STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */
198					bias-disable;
199					drive-push-pull;
200					slew-rate = <2>;
201				};
202			};
203
204			usbotg_fs_pins_b: usbotg_fs@1 {
205				pins {
206					pinmux = <STM32_PINMUX('B', 12, AF12)>, /* OTG_HS_ID */
207						 <STM32_PINMUX('B', 14, AF12)>, /* OTG_HS_DM */
208						 <STM32_PINMUX('B', 15, AF12)>; /* OTG_HS_DP */
209					bias-disable;
210					drive-push-pull;
211					slew-rate = <2>;
212				};
213			};
214
215			usbotg_hs_pins_a: usbotg_hs@0 {
216				pins {
217					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT*/
218						 <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
219						 <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
220						 <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
221						 <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
222						 <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
223						 <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
224						 <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
225						 <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
226						 <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
227						 <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
228						 <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
229					bias-disable;
230					drive-push-pull;
231					slew-rate = <2>;
232				};
233			};
234
235			ethernet_mii: mii@0 {
236				pins {
237					pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_MII_TXD0_ETH_RMII_TXD0 */
238						 <STM32_PINMUX('G', 14, AF11)>, /* ETH_MII_TXD1_ETH_RMII_TXD1 */
239						 <STM32_PINMUX('C', 2, AF11)>, /* ETH_MII_TXD2 */
240						 <STM32_PINMUX('B', 8, AF11)>, /* ETH_MII_TXD3 */
241						 <STM32_PINMUX('C', 3, AF11)>, /* ETH_MII_TX_CLK */
242						 <STM32_PINMUX('G', 11,AF11)>, /* ETH_MII_TX_EN_ETH_RMII_TX_EN */
243						 <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
244						 <STM32_PINMUX('C', 1, AF11)>, /* ETH_MDC */
245						 <STM32_PINMUX('A', 1, AF11)>, /* ETH_MII_RX_CLK_ETH_RMII_REF_CLK */
246						 <STM32_PINMUX('A', 7, AF11)>, /* ETH_MII_RX_DV_ETH_RMII_CRS_DV */
247						 <STM32_PINMUX('C', 4, AF11)>, /* ETH_MII_RXD0_ETH_RMII_RXD0 */
248						 <STM32_PINMUX('C', 5, AF11)>, /* ETH_MII_RXD1_ETH_RMII_RXD1 */
249						 <STM32_PINMUX('H', 6, AF11)>, /* ETH_MII_RXD2 */
250						 <STM32_PINMUX('H', 7, AF11)>; /* ETH_MII_RXD3 */
251					slew-rate = <2>;
252				};
253			};
254
255			adc3_in8_pin: adc@200 {
256				pins {
257					pinmux = <STM32_PINMUX('F', 10, ANALOG)>;
258				};
259			};
260
261			pwm1_pins: pwm@1 {
262				pins {
263					pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */
264						 <STM32_PINMUX('B', 13, AF1)>, /* TIM1_CH1N */
265						 <STM32_PINMUX('B', 12, AF1)>; /* TIM1_BKIN */
266				};
267			};
268
269			pwm3_pins: pwm@3 {
270				pins {
271					pinmux = <STM32_PINMUX('B', 4, AF2)>, /* TIM3_CH1 */
272						 <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
273				};
274			};
275
276			i2c1_pins: i2c1@0 {
277				pins {
278					pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1_SDA */
279						 <STM32_PINMUX('B', 6, AF4)>; /* I2C1_SCL */
280					bias-disable;
281					drive-open-drain;
282					slew-rate = <3>;
283				};
284			};
285
286			ltdc_pins: ltdc@0 {
287				pins {
288					pinmux = <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
289						 <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
290						 <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
291						 <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
292						 <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
293						 <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
294						 <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
295						 <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
296						 <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
297						 <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6*/
298						 <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
299						 <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
300						 <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
301						 <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
302						 <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
303						 <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
304						 <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
305						 <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
306						 <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
307						 <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3*/
308						 <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
309						 <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
310						 <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
311						 <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */
312						 <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
313						 <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
314						 <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
315						 <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
316					slew-rate = <2>;
317				};
318			};
319
320			dcmi_pins: dcmi@0 {
321				pins {
322					pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */
323						 <STM32_PINMUX('B', 7, AF13)>, /* DCMI_VSYNC */
324						 <STM32_PINMUX('A', 6, AF13)>, /* DCMI_PIXCLK */
325						 <STM32_PINMUX('C', 6, AF13)>, /* DCMI_D0 */
326						 <STM32_PINMUX('C', 7, AF13)>, /* DCMI_D1 */
327						 <STM32_PINMUX('C', 8, AF13)>, /* DCMI_D2 */
328						 <STM32_PINMUX('C', 9, AF13)>, /* DCMI_D3 */
329						 <STM32_PINMUX('C', 11, AF13)>, /*DCMI_D4 */
330						 <STM32_PINMUX('D', 3, AF13)>, /* DCMI_D5 */
331						 <STM32_PINMUX('B', 8, AF13)>, /* DCMI_D6 */
332						 <STM32_PINMUX('E', 6, AF13)>, /* DCMI_D7 */
333						 <STM32_PINMUX('C', 10, AF13)>, /* DCMI_D8 */
334						 <STM32_PINMUX('C', 12, AF13)>, /* DCMI_D9 */
335						 <STM32_PINMUX('D', 6, AF13)>, /* DCMI_D10 */
336						 <STM32_PINMUX('D', 2, AF13)>; /* DCMI_D11 */
337					bias-disable;
338					drive-push-pull;
339					slew-rate = <3>;
340				};
341			};
342
343			sdio_pins: sdio_pins@0 {
344				pins {
345					pinmux = <STM32_PINMUX('C', 8, AF12)>,
346						 <STM32_PINMUX('C', 9, AF12)>,
347						 <STM32_PINMUX('C', 10, AF12)>,
348						 <STM32_PINMUX('c', 11, AF12)>,
349						 <STM32_PINMUX('C', 12, AF12)>,
350						 <STM32_PINMUX('D', 2, AF12)>;
351					drive-push-pull;
352					slew-rate = <2>;
353				};
354			};
355
356			sdio_pins_od: sdio_pins_od@0 {
357				pins1 {
358					pinmux = <STM32_PINMUX('C', 8, AF12)>,
359						 <STM32_PINMUX('C', 9, AF12)>,
360						 <STM32_PINMUX('C', 10, AF12)>,
361						 <STM32_PINMUX('C', 11, AF12)>,
362						 <STM32_PINMUX('C', 12, AF12)>;
363					drive-push-pull;
364					slew-rate = <2>;
365				};
366
367				pins2 {
368					pinmux = <STM32_PINMUX('D', 2, AF12)>;
369					drive-open-drain;
370					slew-rate = <2>;
371				};
372			};
373		};
374	};
375};
376