1 /* 2 * (C) Copyright 2000 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 /* 25 * board/config.h - configuration options, board specific 26 */ 27 28 #ifndef __CONFIG_H 29 #define __CONFIG_H 30 31 /* 32 * High Level Configuration Options 33 * (easy to change) 34 */ 35 36 #define CONFIG_MPC860 1 /* This is a MPC860T CPU */ 37 #define CONFIG_HERMES 1 /* ...on a HERMES-PRO board */ 38 39 #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ 40 #undef CONFIG_8xx_CONS_SMC2 41 #undef CONFIG_8xx_CONS_NONE 42 #define CONFIG_BAUDRATE 9600 43 #if 0 44 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ 45 #else 46 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ 47 #endif 48 49 #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ 50 51 #define CONFIG_BOARD_TYPES 1 /* support board types */ 52 53 #define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ 54 55 #undef CONFIG_BOOTARGS 56 #define CONFIG_BOOTCOMMAND \ 57 "bootp; " \ 58 "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ 59 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ 60 "bootm" 61 62 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 63 #undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ 64 65 #undef CONFIG_WATCHDOG /* watchdog disabled */ 66 67 68 /* 69 * Command line configuration. 70 */ 71 #include <config_cmd_default.h> 72 73 74 /* 75 * BOOTP options 76 */ 77 #define CONFIG_BOOTP_SUBNETMASK 78 #define CONFIG_BOOTP_GATEWAY 79 #define CONFIG_BOOTP_HOSTNAME 80 #define CONFIG_BOOTP_BOOTPATH 81 82 83 /* 84 * Miscellaneous configurable options 85 */ 86 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 87 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 88 #if defined(CONFIG_CMD_KGDB) 89 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 90 #else 91 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 92 #endif 93 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 94 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 95 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 96 97 #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ 98 #define CONFIG_SYS_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */ 99 100 #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ 101 102 #define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ 103 104 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ 105 106 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 107 108 #define CONFIG_SYS_ALLOC_DPRAM 1 /* use allocation routines */ 109 /* 110 * Low Level Configuration Settings 111 * (address mappings, register initial values, etc.) 112 * You should know what you are doing if you make changes here. 113 */ 114 /*----------------------------------------------------------------------- 115 * Internal Memory Mapped Register 116 */ 117 #define CONFIG_SYS_IMMR 0xFF000000 /* Non-Standard value! */ 118 119 /*----------------------------------------------------------------------- 120 * Definitions for initial stack pointer and data area (in DPRAM) 121 */ 122 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR 123 #define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ 124 #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ 125 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) 126 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 127 128 /*----------------------------------------------------------------------- 129 * Start addresses for the final memory configuration 130 * (Set up by the startup code) 131 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 132 */ 133 #define CONFIG_SYS_SDRAM_BASE 0x00000000 134 #define CONFIG_SYS_FLASH_BASE 0xFE000000 135 #ifdef DEBUG 136 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 137 #else 138 #define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ 139 #endif 140 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 141 #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ 142 143 /* 144 * For booting Linux, the board info and command line data 145 * have to be in the first 8 MB of memory, since this is 146 * the maximum mapped by the Linux kernel during initialization. 147 */ 148 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ 149 /*----------------------------------------------------------------------- 150 * FLASH organization 151 */ 152 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 153 #define CONFIG_SYS_MAX_FLASH_SECT 124 /* max number of sectors on one chip */ 154 155 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ 156 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ 157 158 #define CONFIG_ENV_IS_IN_FLASH 1 159 #define CONFIG_ENV_OFFSET 0x4000 /* Offset of Environment Sector */ 160 #define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ 161 /*----------------------------------------------------------------------- 162 * Cache Configuration 163 */ 164 #define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ 165 #if defined(CONFIG_CMD_KGDB) 166 #define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ 167 #endif 168 169 /*----------------------------------------------------------------------- 170 * SYPCR - System Protection Control 11-9 171 * SYPCR can only be written once after reset! 172 *----------------------------------------------------------------------- 173 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze 174 * +0x0004 175 */ 176 #if defined(CONFIG_WATCHDOG) 177 #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ 178 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) 179 #else 180 #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) 181 #endif 182 183 /*----------------------------------------------------------------------- 184 * SIUMCR - SIU Module Configuration 11-6 185 *----------------------------------------------------------------------- 186 * +0x0000 => 0x000000C0 187 */ 188 #define CONFIG_SYS_SIUMCR 0 189 190 /*----------------------------------------------------------------------- 191 * TBSCR - Time Base Status and Control 11-26 192 *----------------------------------------------------------------------- 193 * Clear Reference Interrupt Status, Timebase freezing enabled 194 * +0x0200 => 0x00C2 195 */ 196 #define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) 197 198 /*----------------------------------------------------------------------- 199 * PISCR - Periodic Interrupt Status and Control 11-31 200 *----------------------------------------------------------------------- 201 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled 202 * +0x0240 => 0x0082 203 */ 204 #define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) 205 206 /*----------------------------------------------------------------------- 207 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 208 *----------------------------------------------------------------------- 209 * Reset PLL lock status sticky bit, timer expired status bit and timer 210 * interrupt status bit, set PLL multiplication factor ! 211 */ 212 /* +0x0286 => 0x00B0D0C0 */ 213 #define CONFIG_SYS_PLPRCR \ 214 ( (11 << PLPRCR_MF_SHIFT) | \ 215 PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | \ 216 /*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL | \ 217 PLPRCR_CSR | PLPRCR_LOLRE /*|PLPRCR_FIOPD*/ \ 218 ) 219 220 /*----------------------------------------------------------------------- 221 * SCCR - System Clock and reset Control Register 15-27 222 *----------------------------------------------------------------------- 223 * Set clock output, timebase and RTC source and divider, 224 * power management and some other internal clocks 225 */ 226 #define SCCR_MASK SCCR_EBDF11 227 /* +0x0282 => 0x03800000 */ 228 #define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_TBS | \ 229 SCCR_RTDIV | SCCR_RTSEL | \ 230 /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \ 231 SCCR_EBDF00 | SCCR_DFSYNC00 | \ 232 SCCR_DFBRG00 | SCCR_DFNL000 | \ 233 SCCR_DFNH000) 234 235 /*----------------------------------------------------------------------- 236 * RTCSC - Real-Time Clock Status and Control Register 11-27 237 *----------------------------------------------------------------------- 238 */ 239 /* +0x0220 => 0x00C3 */ 240 #define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) 241 242 243 /*----------------------------------------------------------------------- 244 * RCCR - RISC Controller Configuration Register 19-4 245 *----------------------------------------------------------------------- 246 */ 247 /* +0x09C4 => TIMEP=1 */ 248 #define CONFIG_SYS_RCCR 0x0100 249 250 /*----------------------------------------------------------------------- 251 * RMDS - RISC Microcode Development Support Control Register 252 *----------------------------------------------------------------------- 253 */ 254 #define CONFIG_SYS_RMDS 0 255 256 /*----------------------------------------------------------------------- 257 * 258 *----------------------------------------------------------------------- 259 * 260 */ 261 #define CONFIG_SYS_DER 0 262 263 /* 264 * Init Memory Controller: 265 * 266 * BR0 and OR0 (FLASH) 267 */ 268 269 #define FLASH_BASE0_PRELIM 0xFE000000 /* FLASH bank #0 */ 270 271 /* used to re-map FLASH 272 * restrict access enough to keep SRAM working (if any) 273 * but not too much to meddle with FLASH accesses 274 */ 275 /* allow for max 4 MB of Flash */ 276 #define CONFIG_SYS_REMAP_OR_AM 0xFFC00000 /* OR addr mask */ 277 #define CONFIG_SYS_PRELIM_OR_AM 0xFFC00000 /* OR addr mask */ 278 279 /* FLASH timing: ACS = 11, TRLX = 1, CSNT = 1, SCY = 5, EHTR = 0 */ 280 #define CONFIG_SYS_OR_TIMING_FLASH ( OR_CSNT_SAM | /*OR_ACS_DIV4 |*/ OR_BI | \ 281 OR_SCY_5_CLK | OR_TRLX) 282 283 #define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) 284 #define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) 285 /* 8 bit, bank valid */ 286 #define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) 287 288 /* 289 * BR1/OR1 - SDRAM 290 * 291 * Multiplexed addresses, GPL5 output to GPL5_A (don't care) 292 */ 293 #define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM bank */ 294 #define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */ 295 #define SDRAM_TIMING 0x00000A00 /* SDRAM-Timing */ 296 297 #define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB SDRAM */ 298 299 #define CONFIG_SYS_OR1_PRELIM (SDRAM_PRELIM_OR_AM | SDRAM_TIMING ) 300 #define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) 301 302 /* 303 * BR2/OR2 - HPRO2: PEB2256 @ 0xE0000000, 8 Bit wide 304 */ 305 #define HPRO2_BASE 0xE0000000 306 #define HPRO2_OR_AM 0xFFFF8000 307 #define HPRO2_TIMING 0x00000934 308 309 #define CONFIG_SYS_OR2 (HPRO2_OR_AM | HPRO2_TIMING) 310 #define CONFIG_SYS_BR2 ((HPRO2_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) 311 312 /* 313 * BR3/OR3: not used 314 * BR4/OR4: not used 315 * BR5/OR5: not used 316 * BR6/OR6: not used 317 * BR7/OR7: not used 318 */ 319 320 /* 321 * MAMR settings for SDRAM 322 */ 323 324 /* periodic timer for refresh */ 325 #define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */ 326 327 /* 8 column SDRAM */ 328 #define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ 329 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ 330 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) 331 /* 9 column SDRAM */ 332 #define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ 333 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ 334 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) 335 336 /* 337 * Internal Definitions 338 * 339 * Boot Flags 340 */ 341 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 342 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 343 344 #endif /* __CONFIG_H */ 345