1// SPDX-License-Identifier: GPL-2.0
2/ {
3	mbus@f1000000 {
4		pciec: pcie@82000000 {
5			compatible = "marvell,kirkwood-pcie";
6			status = "disabled";
7			device_type = "pci";
8
9			#address-cells = <3>;
10			#size-cells = <2>;
11
12			bus-range = <0x00 0xff>;
13
14			ranges =
15			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
16				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
17				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
18
19			pcie0: pcie@1,0 {
20				device_type = "pci";
21				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
22				reg = <0x0800 0 0 0 0>;
23				#address-cells = <3>;
24				#size-cells = <2>;
25				#interrupt-cells = <1>;
26				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
27					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
28				bus-range = <0x00 0xff>;
29				interrupt-map-mask = <0 0 0 0>;
30				interrupt-map = <0 0 0 0 &intc 9>;
31				marvell,pcie-port = <0>;
32				marvell,pcie-lane = <0>;
33				clocks = <&gate_clk 2>;
34				status = "disabled";
35			};
36		};
37	};
38
39	ocp@f1000000 {
40		pinctrl: pin-controller@10000 {
41			compatible = "marvell,88f6192-pinctrl";
42
43			pmx_sata0: pmx-sata0 {
44				marvell,pins = "mpp5", "mpp21", "mpp23";
45				marvell,function = "sata0";
46			};
47			pmx_sata1: pmx-sata1 {
48				marvell,pins = "mpp4", "mpp20", "mpp22";
49				marvell,function = "sata1";
50			};
51			pmx_sdio: pmx-sdio {
52				marvell,pins = "mpp12", "mpp13", "mpp14",
53					       "mpp15", "mpp16", "mpp17";
54				marvell,function = "sdio";
55			};
56		};
57
58		rtc: rtc@10300 {
59			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
60			reg = <0x10300 0x20>;
61			interrupts = <53>;
62			clocks = <&gate_clk 7>;
63		};
64
65		sata: sata@80000 {
66			compatible = "marvell,orion-sata";
67			reg = <0x80000 0x5000>;
68			interrupts = <21>;
69			clocks = <&gate_clk 14>, <&gate_clk 15>;
70			clock-names = "0", "1";
71			phys = <&sata_phy0>, <&sata_phy1>;
72			phy-names = "port0", "port1";
73			status = "disabled";
74		};
75
76		sdio: mvsdio@90000 {
77			compatible = "marvell,orion-sdio";
78			reg = <0x90000 0x200>;
79			interrupts = <28>;
80			clocks = <&gate_clk 4>;
81			bus-width = <4>;
82			cap-sdio-irq;
83			cap-sd-highspeed;
84			cap-mmc-highspeed;
85			status = "disabled";
86		};
87	};
88};
89