1 /*
2 * Copyright (c) 2003, 2020, Oracle and/or its affiliates. All rights reserved.
3 * Copyright (c) 2014, Red Hat Inc. All rights reserved.
4 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
5 *
6 * This code is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 only, as
8 * published by the Free Software Foundation.
9 *
10 * This code is distributed in the hope that it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
13 * version 2 for more details (a copy is included in the LICENSE file that
14 * accompanied this code).
15 *
16 * You should have received a copy of the GNU General Public License version
17 * 2 along with this work; if not, write to the Free Software Foundation,
18 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
19 *
20 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
21 * or visit www.oracle.com if you need additional information or have any
22 * questions.
23 *
24 */
25
26 #include "precompiled.hpp"
27 #include "asm/macroAssembler.inline.hpp"
28 #include "gc/shared/barrierSet.hpp"
29 #include "gc/shared/barrierSetAssembler.hpp"
30 #include "interp_masm_aarch64.hpp"
31 #include "interpreter/interpreter.hpp"
32 #include "interpreter/interpreterRuntime.hpp"
33 #include "logging/log.hpp"
34 #include "oops/arrayOop.hpp"
35 #include "oops/markWord.hpp"
36 #include "oops/method.hpp"
37 #include "oops/methodData.hpp"
38 #include "prims/jvmtiExport.hpp"
39 #include "prims/jvmtiThreadState.hpp"
40 #include "runtime/basicLock.hpp"
41 #include "runtime/biasedLocking.hpp"
42 #include "runtime/frame.inline.hpp"
43 #include "runtime/safepointMechanism.hpp"
44 #include "runtime/sharedRuntime.hpp"
45 #include "runtime/thread.inline.hpp"
46 #include "utilities/powerOfTwo.hpp"
47
narrow(Register result)48 void InterpreterMacroAssembler::narrow(Register result) {
49
50 // Get method->_constMethod->_result_type
51 ldr(rscratch1, Address(rfp, frame::interpreter_frame_method_offset * wordSize));
52 ldr(rscratch1, Address(rscratch1, Method::const_offset()));
53 ldrb(rscratch1, Address(rscratch1, ConstMethod::result_type_offset()));
54
55 Label done, notBool, notByte, notChar;
56
57 // common case first
58 cmpw(rscratch1, T_INT);
59 br(Assembler::EQ, done);
60
61 // mask integer result to narrower return type.
62 cmpw(rscratch1, T_BOOLEAN);
63 br(Assembler::NE, notBool);
64 andw(result, result, 0x1);
65 b(done);
66
67 bind(notBool);
68 cmpw(rscratch1, T_BYTE);
69 br(Assembler::NE, notByte);
70 sbfx(result, result, 0, 8);
71 b(done);
72
73 bind(notByte);
74 cmpw(rscratch1, T_CHAR);
75 br(Assembler::NE, notChar);
76 ubfx(result, result, 0, 16); // truncate upper 16 bits
77 b(done);
78
79 bind(notChar);
80 sbfx(result, result, 0, 16); // sign-extend short
81
82 // Nothing to do for T_INT
83 bind(done);
84 }
85
jump_to_entry(address entry)86 void InterpreterMacroAssembler::jump_to_entry(address entry) {
87 assert(entry, "Entry must have been generated by now");
88 b(entry);
89 }
90
check_and_handle_popframe(Register java_thread)91 void InterpreterMacroAssembler::check_and_handle_popframe(Register java_thread) {
92 if (JvmtiExport::can_pop_frame()) {
93 Label L;
94 // Initiate popframe handling only if it is not already being
95 // processed. If the flag has the popframe_processing bit set, it
96 // means that this code is called *during* popframe handling - we
97 // don't want to reenter.
98 // This method is only called just after the call into the vm in
99 // call_VM_base, so the arg registers are available.
100 ldrw(rscratch1, Address(rthread, JavaThread::popframe_condition_offset()));
101 tbz(rscratch1, exact_log2(JavaThread::popframe_pending_bit), L);
102 tbnz(rscratch1, exact_log2(JavaThread::popframe_processing_bit), L);
103 // Call Interpreter::remove_activation_preserving_args_entry() to get the
104 // address of the same-named entrypoint in the generated interpreter code.
105 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry));
106 br(r0);
107 bind(L);
108 }
109 }
110
111
load_earlyret_value(TosState state)112 void InterpreterMacroAssembler::load_earlyret_value(TosState state) {
113 ldr(r2, Address(rthread, JavaThread::jvmti_thread_state_offset()));
114 const Address tos_addr(r2, JvmtiThreadState::earlyret_tos_offset());
115 const Address oop_addr(r2, JvmtiThreadState::earlyret_oop_offset());
116 const Address val_addr(r2, JvmtiThreadState::earlyret_value_offset());
117 switch (state) {
118 case atos: ldr(r0, oop_addr);
119 str(zr, oop_addr);
120 verify_oop(r0, state); break;
121 case ltos: ldr(r0, val_addr); break;
122 case btos: // fall through
123 case ztos: // fall through
124 case ctos: // fall through
125 case stos: // fall through
126 case itos: ldrw(r0, val_addr); break;
127 case ftos: ldrs(v0, val_addr); break;
128 case dtos: ldrd(v0, val_addr); break;
129 case vtos: /* nothing to do */ break;
130 default : ShouldNotReachHere();
131 }
132 // Clean up tos value in the thread object
133 movw(rscratch1, (int) ilgl);
134 strw(rscratch1, tos_addr);
135 strw(zr, val_addr);
136 }
137
138
check_and_handle_earlyret(Register java_thread)139 void InterpreterMacroAssembler::check_and_handle_earlyret(Register java_thread) {
140 if (JvmtiExport::can_force_early_return()) {
141 Label L;
142 ldr(rscratch1, Address(rthread, JavaThread::jvmti_thread_state_offset()));
143 cbz(rscratch1, L); // if (thread->jvmti_thread_state() == NULL) exit;
144
145 // Initiate earlyret handling only if it is not already being processed.
146 // If the flag has the earlyret_processing bit set, it means that this code
147 // is called *during* earlyret handling - we don't want to reenter.
148 ldrw(rscratch1, Address(rscratch1, JvmtiThreadState::earlyret_state_offset()));
149 cmpw(rscratch1, JvmtiThreadState::earlyret_pending);
150 br(Assembler::NE, L);
151
152 // Call Interpreter::remove_activation_early_entry() to get the address of the
153 // same-named entrypoint in the generated interpreter code.
154 ldr(rscratch1, Address(rthread, JavaThread::jvmti_thread_state_offset()));
155 ldrw(rscratch1, Address(rscratch1, JvmtiThreadState::earlyret_tos_offset()));
156 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), rscratch1);
157 br(r0);
158 bind(L);
159 }
160 }
161
get_unsigned_2_byte_index_at_bcp(Register reg,int bcp_offset)162 void InterpreterMacroAssembler::get_unsigned_2_byte_index_at_bcp(
163 Register reg,
164 int bcp_offset) {
165 assert(bcp_offset >= 0, "bcp is still pointing to start of bytecode");
166 ldrh(reg, Address(rbcp, bcp_offset));
167 rev16(reg, reg);
168 }
169
get_dispatch()170 void InterpreterMacroAssembler::get_dispatch() {
171 unsigned long offset;
172 adrp(rdispatch, ExternalAddress((address)Interpreter::dispatch_table()), offset);
173 lea(rdispatch, Address(rdispatch, offset));
174 }
175
get_cache_index_at_bcp(Register index,int bcp_offset,size_t index_size)176 void InterpreterMacroAssembler::get_cache_index_at_bcp(Register index,
177 int bcp_offset,
178 size_t index_size) {
179 assert(bcp_offset > 0, "bcp is still pointing to start of bytecode");
180 if (index_size == sizeof(u2)) {
181 load_unsigned_short(index, Address(rbcp, bcp_offset));
182 } else if (index_size == sizeof(u4)) {
183 // assert(EnableInvokeDynamic, "giant index used only for JSR 292");
184 ldrw(index, Address(rbcp, bcp_offset));
185 // Check if the secondary index definition is still ~x, otherwise
186 // we have to change the following assembler code to calculate the
187 // plain index.
188 assert(ConstantPool::decode_invokedynamic_index(~123) == 123, "else change next line");
189 eonw(index, index, zr); // convert to plain index
190 } else if (index_size == sizeof(u1)) {
191 load_unsigned_byte(index, Address(rbcp, bcp_offset));
192 } else {
193 ShouldNotReachHere();
194 }
195 }
196
197 // Return
198 // Rindex: index into constant pool
199 // Rcache: address of cache entry - ConstantPoolCache::base_offset()
200 //
201 // A caller must add ConstantPoolCache::base_offset() to Rcache to get
202 // the true address of the cache entry.
203 //
get_cache_and_index_at_bcp(Register cache,Register index,int bcp_offset,size_t index_size)204 void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache,
205 Register index,
206 int bcp_offset,
207 size_t index_size) {
208 assert_different_registers(cache, index);
209 assert_different_registers(cache, rcpool);
210 get_cache_index_at_bcp(index, bcp_offset, index_size);
211 assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below");
212 // convert from field index to ConstantPoolCacheEntry
213 // aarch64 already has the cache in rcpool so there is no need to
214 // install it in cache. instead we pre-add the indexed offset to
215 // rcpool and return it in cache. All clients of this method need to
216 // be modified accordingly.
217 add(cache, rcpool, index, Assembler::LSL, 5);
218 }
219
220
get_cache_and_index_and_bytecode_at_bcp(Register cache,Register index,Register bytecode,int byte_no,int bcp_offset,size_t index_size)221 void InterpreterMacroAssembler::get_cache_and_index_and_bytecode_at_bcp(Register cache,
222 Register index,
223 Register bytecode,
224 int byte_no,
225 int bcp_offset,
226 size_t index_size) {
227 get_cache_and_index_at_bcp(cache, index, bcp_offset, index_size);
228 // We use a 32-bit load here since the layout of 64-bit words on
229 // little-endian machines allow us that.
230 // n.b. unlike x86 cache already includes the index offset
231 lea(bytecode, Address(cache,
232 ConstantPoolCache::base_offset()
233 + ConstantPoolCacheEntry::indices_offset()));
234 ldarw(bytecode, bytecode);
235 const int shift_count = (1 + byte_no) * BitsPerByte;
236 ubfx(bytecode, bytecode, shift_count, BitsPerByte);
237 }
238
get_cache_entry_pointer_at_bcp(Register cache,Register tmp,int bcp_offset,size_t index_size)239 void InterpreterMacroAssembler::get_cache_entry_pointer_at_bcp(Register cache,
240 Register tmp,
241 int bcp_offset,
242 size_t index_size) {
243 assert(cache != tmp, "must use different register");
244 get_cache_index_at_bcp(tmp, bcp_offset, index_size);
245 assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below");
246 // convert from field index to ConstantPoolCacheEntry index
247 // and from word offset to byte offset
248 assert(exact_log2(in_bytes(ConstantPoolCacheEntry::size_in_bytes())) == 2 + LogBytesPerWord, "else change next line");
249 ldr(cache, Address(rfp, frame::interpreter_frame_cache_offset * wordSize));
250 // skip past the header
251 add(cache, cache, in_bytes(ConstantPoolCache::base_offset()));
252 add(cache, cache, tmp, Assembler::LSL, 2 + LogBytesPerWord); // construct pointer to cache entry
253 }
254
get_method_counters(Register method,Register mcs,Label & skip)255 void InterpreterMacroAssembler::get_method_counters(Register method,
256 Register mcs, Label& skip) {
257 Label has_counters;
258 ldr(mcs, Address(method, Method::method_counters_offset()));
259 cbnz(mcs, has_counters);
260 call_VM(noreg, CAST_FROM_FN_PTR(address,
261 InterpreterRuntime::build_method_counters), method);
262 ldr(mcs, Address(method, Method::method_counters_offset()));
263 cbz(mcs, skip); // No MethodCounters allocated, OutOfMemory
264 bind(has_counters);
265 }
266
267 // Load object from cpool->resolved_references(index)
load_resolved_reference_at_index(Register result,Register index,Register tmp)268 void InterpreterMacroAssembler::load_resolved_reference_at_index(
269 Register result, Register index, Register tmp) {
270 assert_different_registers(result, index);
271
272 get_constant_pool(result);
273 // load pointer for resolved_references[] objArray
274 ldr(result, Address(result, ConstantPool::cache_offset_in_bytes()));
275 ldr(result, Address(result, ConstantPoolCache::resolved_references_offset_in_bytes()));
276 resolve_oop_handle(result, tmp);
277 // Add in the index
278 add(index, index, arrayOopDesc::base_offset_in_bytes(T_OBJECT) >> LogBytesPerHeapOop);
279 load_heap_oop(result, Address(result, index, Address::uxtw(LogBytesPerHeapOop)));
280 }
281
load_resolved_klass_at_offset(Register cpool,Register index,Register klass,Register temp)282 void InterpreterMacroAssembler::load_resolved_klass_at_offset(
283 Register cpool, Register index, Register klass, Register temp) {
284 add(temp, cpool, index, LSL, LogBytesPerWord);
285 ldrh(temp, Address(temp, sizeof(ConstantPool))); // temp = resolved_klass_index
286 ldr(klass, Address(cpool, ConstantPool::resolved_klasses_offset_in_bytes())); // klass = cpool->_resolved_klasses
287 add(klass, klass, temp, LSL, LogBytesPerWord);
288 ldr(klass, Address(klass, Array<Klass*>::base_offset_in_bytes()));
289 }
290
load_resolved_method_at_index(int byte_no,Register method,Register cache)291 void InterpreterMacroAssembler::load_resolved_method_at_index(int byte_no,
292 Register method,
293 Register cache) {
294 const int method_offset = in_bytes(
295 ConstantPoolCache::base_offset() +
296 ((byte_no == TemplateTable::f2_byte)
297 ? ConstantPoolCacheEntry::f2_offset()
298 : ConstantPoolCacheEntry::f1_offset()));
299
300 ldr(method, Address(cache, method_offset)); // get f1 Method*
301 }
302
303 // Generate a subtype check: branch to ok_is_subtype if sub_klass is a
304 // subtype of super_klass.
305 //
306 // Args:
307 // r0: superklass
308 // Rsub_klass: subklass
309 //
310 // Kills:
311 // r2, r5
gen_subtype_check(Register Rsub_klass,Label & ok_is_subtype)312 void InterpreterMacroAssembler::gen_subtype_check(Register Rsub_klass,
313 Label& ok_is_subtype) {
314 assert(Rsub_klass != r0, "r0 holds superklass");
315 assert(Rsub_klass != r2, "r2 holds 2ndary super array length");
316 assert(Rsub_klass != r5, "r5 holds 2ndary super array scan ptr");
317
318 // Profile the not-null value's klass.
319 profile_typecheck(r2, Rsub_klass, r5); // blows r2, reloads r5
320
321 // Do the check.
322 check_klass_subtype(Rsub_klass, r0, r2, ok_is_subtype); // blows r2
323
324 // Profile the failure of the check.
325 profile_typecheck_failed(r2); // blows r2
326 }
327
328 // Java Expression Stack
329
pop_ptr(Register r)330 void InterpreterMacroAssembler::pop_ptr(Register r) {
331 ldr(r, post(esp, wordSize));
332 }
333
pop_i(Register r)334 void InterpreterMacroAssembler::pop_i(Register r) {
335 ldrw(r, post(esp, wordSize));
336 }
337
pop_l(Register r)338 void InterpreterMacroAssembler::pop_l(Register r) {
339 ldr(r, post(esp, 2 * Interpreter::stackElementSize));
340 }
341
push_ptr(Register r)342 void InterpreterMacroAssembler::push_ptr(Register r) {
343 str(r, pre(esp, -wordSize));
344 }
345
push_i(Register r)346 void InterpreterMacroAssembler::push_i(Register r) {
347 str(r, pre(esp, -wordSize));
348 }
349
push_l(Register r)350 void InterpreterMacroAssembler::push_l(Register r) {
351 str(zr, pre(esp, -wordSize));
352 str(r, pre(esp, - wordSize));
353 }
354
pop_f(FloatRegister r)355 void InterpreterMacroAssembler::pop_f(FloatRegister r) {
356 ldrs(r, post(esp, wordSize));
357 }
358
pop_d(FloatRegister r)359 void InterpreterMacroAssembler::pop_d(FloatRegister r) {
360 ldrd(r, post(esp, 2 * Interpreter::stackElementSize));
361 }
362
push_f(FloatRegister r)363 void InterpreterMacroAssembler::push_f(FloatRegister r) {
364 strs(r, pre(esp, -wordSize));
365 }
366
push_d(FloatRegister r)367 void InterpreterMacroAssembler::push_d(FloatRegister r) {
368 strd(r, pre(esp, 2* -wordSize));
369 }
370
pop(TosState state)371 void InterpreterMacroAssembler::pop(TosState state) {
372 switch (state) {
373 case atos: pop_ptr(); break;
374 case btos:
375 case ztos:
376 case ctos:
377 case stos:
378 case itos: pop_i(); break;
379 case ltos: pop_l(); break;
380 case ftos: pop_f(); break;
381 case dtos: pop_d(); break;
382 case vtos: /* nothing to do */ break;
383 default: ShouldNotReachHere();
384 }
385 verify_oop(r0, state);
386 }
387
push(TosState state)388 void InterpreterMacroAssembler::push(TosState state) {
389 verify_oop(r0, state);
390 switch (state) {
391 case atos: push_ptr(); break;
392 case btos:
393 case ztos:
394 case ctos:
395 case stos:
396 case itos: push_i(); break;
397 case ltos: push_l(); break;
398 case ftos: push_f(); break;
399 case dtos: push_d(); break;
400 case vtos: /* nothing to do */ break;
401 default : ShouldNotReachHere();
402 }
403 }
404
405 // Helpers for swap and dup
load_ptr(int n,Register val)406 void InterpreterMacroAssembler::load_ptr(int n, Register val) {
407 ldr(val, Address(esp, Interpreter::expr_offset_in_bytes(n)));
408 }
409
store_ptr(int n,Register val)410 void InterpreterMacroAssembler::store_ptr(int n, Register val) {
411 str(val, Address(esp, Interpreter::expr_offset_in_bytes(n)));
412 }
413
load_float(Address src)414 void InterpreterMacroAssembler::load_float(Address src) {
415 ldrs(v0, src);
416 }
417
load_double(Address src)418 void InterpreterMacroAssembler::load_double(Address src) {
419 ldrd(v0, src);
420 }
421
prepare_to_jump_from_interpreted()422 void InterpreterMacroAssembler::prepare_to_jump_from_interpreted() {
423 // set sender sp
424 mov(r13, sp);
425 // record last_sp
426 str(esp, Address(rfp, frame::interpreter_frame_last_sp_offset * wordSize));
427 }
428
429 // Jump to from_interpreted entry of a call unless single stepping is possible
430 // in this thread in which case we must call the i2i entry
jump_from_interpreted(Register method,Register temp)431 void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) {
432 prepare_to_jump_from_interpreted();
433
434 if (JvmtiExport::can_post_interpreter_events()) {
435 Label run_compiled_code;
436 // JVMTI events, such as single-stepping, are implemented partly by avoiding running
437 // compiled code in threads for which the event is enabled. Check here for
438 // interp_only_mode if these events CAN be enabled.
439 ldrw(rscratch1, Address(rthread, JavaThread::interp_only_mode_offset()));
440 cbzw(rscratch1, run_compiled_code);
441 ldr(rscratch1, Address(method, Method::interpreter_entry_offset()));
442 br(rscratch1);
443 bind(run_compiled_code);
444 }
445
446 ldr(rscratch1, Address(method, Method::from_interpreted_offset()));
447 br(rscratch1);
448 }
449
450 // The following two routines provide a hook so that an implementation
451 // can schedule the dispatch in two parts. amd64 does not do this.
dispatch_prolog(TosState state,int step)452 void InterpreterMacroAssembler::dispatch_prolog(TosState state, int step) {
453 }
454
dispatch_epilog(TosState state,int step)455 void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) {
456 dispatch_next(state, step);
457 }
458
dispatch_base(TosState state,address * table,bool verifyoop,bool generate_poll)459 void InterpreterMacroAssembler::dispatch_base(TosState state,
460 address* table,
461 bool verifyoop,
462 bool generate_poll) {
463 if (VerifyActivationFrameSize) {
464 Unimplemented();
465 }
466 if (verifyoop) {
467 verify_oop(r0, state);
468 }
469
470 Label safepoint;
471 address* const safepoint_table = Interpreter::safept_table(state);
472 bool needs_thread_local_poll = generate_poll && table != safepoint_table;
473
474 if (needs_thread_local_poll) {
475 NOT_PRODUCT(block_comment("Thread-local Safepoint poll"));
476 ldr(rscratch2, Address(rthread, Thread::polling_page_offset()));
477 tbnz(rscratch2, exact_log2(SafepointMechanism::poll_bit()), safepoint);
478 }
479
480 if (table == Interpreter::dispatch_table(state)) {
481 addw(rscratch2, rscratch1, Interpreter::distance_from_dispatch_table(state));
482 ldr(rscratch2, Address(rdispatch, rscratch2, Address::uxtw(3)));
483 } else {
484 mov(rscratch2, (address)table);
485 ldr(rscratch2, Address(rscratch2, rscratch1, Address::uxtw(3)));
486 }
487 br(rscratch2);
488
489 if (needs_thread_local_poll) {
490 bind(safepoint);
491 lea(rscratch2, ExternalAddress((address)safepoint_table));
492 ldr(rscratch2, Address(rscratch2, rscratch1, Address::uxtw(3)));
493 br(rscratch2);
494 }
495 }
496
dispatch_only(TosState state,bool generate_poll)497 void InterpreterMacroAssembler::dispatch_only(TosState state, bool generate_poll) {
498 dispatch_base(state, Interpreter::dispatch_table(state), true, generate_poll);
499 }
500
dispatch_only_normal(TosState state)501 void InterpreterMacroAssembler::dispatch_only_normal(TosState state) {
502 dispatch_base(state, Interpreter::normal_table(state));
503 }
504
dispatch_only_noverify(TosState state)505 void InterpreterMacroAssembler::dispatch_only_noverify(TosState state) {
506 dispatch_base(state, Interpreter::normal_table(state), false);
507 }
508
509
dispatch_next(TosState state,int step,bool generate_poll)510 void InterpreterMacroAssembler::dispatch_next(TosState state, int step, bool generate_poll) {
511 // load next bytecode
512 ldrb(rscratch1, Address(pre(rbcp, step)));
513 dispatch_base(state, Interpreter::dispatch_table(state), generate_poll);
514 }
515
dispatch_via(TosState state,address * table)516 void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) {
517 // load current bytecode
518 ldrb(rscratch1, Address(rbcp, 0));
519 dispatch_base(state, table);
520 }
521
522 // remove activation
523 //
524 // Unlock the receiver if this is a synchronized method.
525 // Unlock any Java monitors from syncronized blocks.
526 // Remove the activation from the stack.
527 //
528 // If there are locked Java monitors
529 // If throw_monitor_exception
530 // throws IllegalMonitorStateException
531 // Else if install_monitor_exception
532 // installs IllegalMonitorStateException
533 // Else
534 // no error processing
remove_activation(TosState state,bool throw_monitor_exception,bool install_monitor_exception,bool notify_jvmdi)535 void InterpreterMacroAssembler::remove_activation(
536 TosState state,
537 bool throw_monitor_exception,
538 bool install_monitor_exception,
539 bool notify_jvmdi) {
540 // Note: Registers r3 xmm0 may be in use for the
541 // result check if synchronized method
542 Label unlocked, unlock, no_unlock;
543
544 // get the value of _do_not_unlock_if_synchronized into r3
545 const Address do_not_unlock_if_synchronized(rthread,
546 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
547 ldrb(r3, do_not_unlock_if_synchronized);
548 strb(zr, do_not_unlock_if_synchronized); // reset the flag
549
550 // get method access flags
551 ldr(r1, Address(rfp, frame::interpreter_frame_method_offset * wordSize));
552 ldr(r2, Address(r1, Method::access_flags_offset()));
553 tbz(r2, exact_log2(JVM_ACC_SYNCHRONIZED), unlocked);
554
555 // Don't unlock anything if the _do_not_unlock_if_synchronized flag
556 // is set.
557 cbnz(r3, no_unlock);
558
559 // unlock monitor
560 push(state); // save result
561
562 // BasicObjectLock will be first in list, since this is a
563 // synchronized method. However, need to check that the object has
564 // not been unlocked by an explicit monitorexit bytecode.
565 const Address monitor(rfp, frame::interpreter_frame_initial_sp_offset *
566 wordSize - (int) sizeof(BasicObjectLock));
567 // We use c_rarg1 so that if we go slow path it will be the correct
568 // register for unlock_object to pass to VM directly
569 lea(c_rarg1, monitor); // address of first monitor
570
571 ldr(r0, Address(c_rarg1, BasicObjectLock::obj_offset_in_bytes()));
572 cbnz(r0, unlock);
573
574 pop(state);
575 if (throw_monitor_exception) {
576 // Entry already unlocked, need to throw exception
577 call_VM(noreg, CAST_FROM_FN_PTR(address,
578 InterpreterRuntime::throw_illegal_monitor_state_exception));
579 should_not_reach_here();
580 } else {
581 // Monitor already unlocked during a stack unroll. If requested,
582 // install an illegal_monitor_state_exception. Continue with
583 // stack unrolling.
584 if (install_monitor_exception) {
585 call_VM(noreg, CAST_FROM_FN_PTR(address,
586 InterpreterRuntime::new_illegal_monitor_state_exception));
587 }
588 b(unlocked);
589 }
590
591 bind(unlock);
592 unlock_object(c_rarg1);
593 pop(state);
594
595 // Check that for block-structured locking (i.e., that all locked
596 // objects has been unlocked)
597 bind(unlocked);
598
599 // r0: Might contain return value
600
601 // Check that all monitors are unlocked
602 {
603 Label loop, exception, entry, restart;
604 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize;
605 const Address monitor_block_top(
606 rfp, frame::interpreter_frame_monitor_block_top_offset * wordSize);
607 const Address monitor_block_bot(
608 rfp, frame::interpreter_frame_initial_sp_offset * wordSize);
609
610 bind(restart);
611 // We use c_rarg1 so that if we go slow path it will be the correct
612 // register for unlock_object to pass to VM directly
613 ldr(c_rarg1, monitor_block_top); // points to current entry, starting
614 // with top-most entry
615 lea(r19, monitor_block_bot); // points to word before bottom of
616 // monitor block
617 b(entry);
618
619 // Entry already locked, need to throw exception
620 bind(exception);
621
622 if (throw_monitor_exception) {
623 // Throw exception
624 MacroAssembler::call_VM(noreg,
625 CAST_FROM_FN_PTR(address, InterpreterRuntime::
626 throw_illegal_monitor_state_exception));
627 should_not_reach_here();
628 } else {
629 // Stack unrolling. Unlock object and install illegal_monitor_exception.
630 // Unlock does not block, so don't have to worry about the frame.
631 // We don't have to preserve c_rarg1 since we are going to throw an exception.
632
633 push(state);
634 unlock_object(c_rarg1);
635 pop(state);
636
637 if (install_monitor_exception) {
638 call_VM(noreg, CAST_FROM_FN_PTR(address,
639 InterpreterRuntime::
640 new_illegal_monitor_state_exception));
641 }
642
643 b(restart);
644 }
645
646 bind(loop);
647 // check if current entry is used
648 ldr(rscratch1, Address(c_rarg1, BasicObjectLock::obj_offset_in_bytes()));
649 cbnz(rscratch1, exception);
650
651 add(c_rarg1, c_rarg1, entry_size); // otherwise advance to next entry
652 bind(entry);
653 cmp(c_rarg1, r19); // check if bottom reached
654 br(Assembler::NE, loop); // if not at bottom then check this entry
655 }
656
657 bind(no_unlock);
658
659 // jvmti support
660 if (notify_jvmdi) {
661 notify_method_exit(state, NotifyJVMTI); // preserve TOSCA
662 } else {
663 notify_method_exit(state, SkipNotifyJVMTI); // preserve TOSCA
664 }
665
666 // remove activation
667 // get sender esp
668 ldr(esp,
669 Address(rfp, frame::interpreter_frame_sender_sp_offset * wordSize));
670 if (StackReservedPages > 0) {
671 // testing if reserved zone needs to be re-enabled
672 Label no_reserved_zone_enabling;
673
674 ldr(rscratch1, Address(rthread, JavaThread::reserved_stack_activation_offset()));
675 cmp(esp, rscratch1);
676 br(Assembler::LS, no_reserved_zone_enabling);
677
678 call_VM_leaf(
679 CAST_FROM_FN_PTR(address, SharedRuntime::enable_stack_reserved_zone), rthread);
680 call_VM(noreg, CAST_FROM_FN_PTR(address,
681 InterpreterRuntime::throw_delayed_StackOverflowError));
682 should_not_reach_here();
683
684 bind(no_reserved_zone_enabling);
685 }
686 // remove frame anchor
687 leave();
688 // If we're returning to interpreted code we will shortly be
689 // adjusting SP to allow some space for ESP. If we're returning to
690 // compiled code the saved sender SP was saved in sender_sp, so this
691 // restores it.
692 andr(sp, esp, -16);
693 }
694
695 // Lock object
696 //
697 // Args:
698 // c_rarg1: BasicObjectLock to be used for locking
699 //
700 // Kills:
701 // r0
702 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, .. (param regs)
703 // rscratch1, rscratch2 (scratch regs)
lock_object(Register lock_reg)704 void InterpreterMacroAssembler::lock_object(Register lock_reg)
705 {
706 assert(lock_reg == c_rarg1, "The argument is only for looks. It must be c_rarg1");
707 if (UseHeavyMonitors) {
708 call_VM(noreg,
709 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter),
710 lock_reg);
711 } else {
712 Label done;
713
714 const Register swap_reg = r0;
715 const Register tmp = c_rarg2;
716 const Register obj_reg = c_rarg3; // Will contain the oop
717
718 const int obj_offset = BasicObjectLock::obj_offset_in_bytes();
719 const int lock_offset = BasicObjectLock::lock_offset_in_bytes ();
720 const int mark_offset = lock_offset +
721 BasicLock::displaced_header_offset_in_bytes();
722
723 Label slow_case;
724
725 // Load object pointer into obj_reg %c_rarg3
726 ldr(obj_reg, Address(lock_reg, obj_offset));
727
728 if (UseBiasedLocking) {
729 biased_locking_enter(lock_reg, obj_reg, swap_reg, tmp, false, done, &slow_case);
730 }
731
732 // Load (object->mark() | 1) into swap_reg
733 ldr(rscratch1, Address(obj_reg, oopDesc::mark_offset_in_bytes()));
734 orr(swap_reg, rscratch1, 1);
735
736 // Save (object->mark() | 1) into BasicLock's displaced header
737 str(swap_reg, Address(lock_reg, mark_offset));
738
739 assert(lock_offset == 0,
740 "displached header must be first word in BasicObjectLock");
741
742 Label fail;
743 if (PrintBiasedLockingStatistics) {
744 Label fast;
745 cmpxchg_obj_header(swap_reg, lock_reg, obj_reg, rscratch1, fast, &fail);
746 bind(fast);
747 atomic_incw(Address((address)BiasedLocking::fast_path_entry_count_addr()),
748 rscratch2, rscratch1, tmp);
749 b(done);
750 bind(fail);
751 } else {
752 cmpxchg_obj_header(swap_reg, lock_reg, obj_reg, rscratch1, done, /*fallthrough*/NULL);
753 }
754
755 // Test if the oopMark is an obvious stack pointer, i.e.,
756 // 1) (mark & 7) == 0, and
757 // 2) rsp <= mark < mark + os::pagesize()
758 //
759 // These 3 tests can be done by evaluating the following
760 // expression: ((mark - rsp) & (7 - os::vm_page_size())),
761 // assuming both stack pointer and pagesize have their
762 // least significant 3 bits clear.
763 // NOTE: the oopMark is in swap_reg %r0 as the result of cmpxchg
764 // NOTE2: aarch64 does not like to subtract sp from rn so take a
765 // copy
766 mov(rscratch1, sp);
767 sub(swap_reg, swap_reg, rscratch1);
768 ands(swap_reg, swap_reg, (unsigned long)(7 - os::vm_page_size()));
769
770 // Save the test result, for recursive case, the result is zero
771 str(swap_reg, Address(lock_reg, mark_offset));
772
773 if (PrintBiasedLockingStatistics) {
774 br(Assembler::NE, slow_case);
775 atomic_incw(Address((address)BiasedLocking::fast_path_entry_count_addr()),
776 rscratch2, rscratch1, tmp);
777 }
778 br(Assembler::EQ, done);
779
780 bind(slow_case);
781
782 // Call the runtime routine for slow case
783 call_VM(noreg,
784 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter),
785 lock_reg);
786
787 bind(done);
788 }
789 }
790
791
792 // Unlocks an object. Used in monitorexit bytecode and
793 // remove_activation. Throws an IllegalMonitorException if object is
794 // not locked by current thread.
795 //
796 // Args:
797 // c_rarg1: BasicObjectLock for lock
798 //
799 // Kills:
800 // r0
801 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, ... (param regs)
802 // rscratch1, rscratch2 (scratch regs)
unlock_object(Register lock_reg)803 void InterpreterMacroAssembler::unlock_object(Register lock_reg)
804 {
805 assert(lock_reg == c_rarg1, "The argument is only for looks. It must be rarg1");
806
807 if (UseHeavyMonitors) {
808 call_VM(noreg,
809 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit),
810 lock_reg);
811 } else {
812 Label done;
813
814 const Register swap_reg = r0;
815 const Register header_reg = c_rarg2; // Will contain the old oopMark
816 const Register obj_reg = c_rarg3; // Will contain the oop
817
818 save_bcp(); // Save in case of exception
819
820 // Convert from BasicObjectLock structure to object and BasicLock
821 // structure Store the BasicLock address into %r0
822 lea(swap_reg, Address(lock_reg, BasicObjectLock::lock_offset_in_bytes()));
823
824 // Load oop into obj_reg(%c_rarg3)
825 ldr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()));
826
827 // Free entry
828 str(zr, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()));
829
830 if (UseBiasedLocking) {
831 biased_locking_exit(obj_reg, header_reg, done);
832 }
833
834 // Load the old header from BasicLock structure
835 ldr(header_reg, Address(swap_reg,
836 BasicLock::displaced_header_offset_in_bytes()));
837
838 // Test for recursion
839 cbz(header_reg, done);
840
841 // Atomic swap back the old header
842 cmpxchg_obj_header(swap_reg, header_reg, obj_reg, rscratch1, done, /*fallthrough*/NULL);
843
844 // Call the runtime routine for slow case.
845 str(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes())); // restore obj
846 call_VM(noreg,
847 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit),
848 lock_reg);
849
850 bind(done);
851
852 restore_bcp();
853 }
854 }
855
test_method_data_pointer(Register mdp,Label & zero_continue)856 void InterpreterMacroAssembler::test_method_data_pointer(Register mdp,
857 Label& zero_continue) {
858 assert(ProfileInterpreter, "must be profiling interpreter");
859 ldr(mdp, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize));
860 cbz(mdp, zero_continue);
861 }
862
863 // Set the method data pointer for the current bcp.
set_method_data_pointer_for_bcp()864 void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() {
865 assert(ProfileInterpreter, "must be profiling interpreter");
866 Label set_mdp;
867 stp(r0, r1, Address(pre(sp, -2 * wordSize)));
868
869 // Test MDO to avoid the call if it is NULL.
870 ldr(r0, Address(rmethod, in_bytes(Method::method_data_offset())));
871 cbz(r0, set_mdp);
872 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), rmethod, rbcp);
873 // r0: mdi
874 // mdo is guaranteed to be non-zero here, we checked for it before the call.
875 ldr(r1, Address(rmethod, in_bytes(Method::method_data_offset())));
876 lea(r1, Address(r1, in_bytes(MethodData::data_offset())));
877 add(r0, r1, r0);
878 str(r0, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize));
879 bind(set_mdp);
880 ldp(r0, r1, Address(post(sp, 2 * wordSize)));
881 }
882
verify_method_data_pointer()883 void InterpreterMacroAssembler::verify_method_data_pointer() {
884 assert(ProfileInterpreter, "must be profiling interpreter");
885 #ifdef ASSERT
886 Label verify_continue;
887 stp(r0, r1, Address(pre(sp, -2 * wordSize)));
888 stp(r2, r3, Address(pre(sp, -2 * wordSize)));
889 test_method_data_pointer(r3, verify_continue); // If mdp is zero, continue
890 get_method(r1);
891
892 // If the mdp is valid, it will point to a DataLayout header which is
893 // consistent with the bcp. The converse is highly probable also.
894 ldrsh(r2, Address(r3, in_bytes(DataLayout::bci_offset())));
895 ldr(rscratch1, Address(r1, Method::const_offset()));
896 add(r2, r2, rscratch1, Assembler::LSL);
897 lea(r2, Address(r2, ConstMethod::codes_offset()));
898 cmp(r2, rbcp);
899 br(Assembler::EQ, verify_continue);
900 // r1: method
901 // rbcp: bcp // rbcp == 22
902 // r3: mdp
903 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp),
904 r1, rbcp, r3);
905 bind(verify_continue);
906 ldp(r2, r3, Address(post(sp, 2 * wordSize)));
907 ldp(r0, r1, Address(post(sp, 2 * wordSize)));
908 #endif // ASSERT
909 }
910
911
set_mdp_data_at(Register mdp_in,int constant,Register value)912 void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in,
913 int constant,
914 Register value) {
915 assert(ProfileInterpreter, "must be profiling interpreter");
916 Address data(mdp_in, constant);
917 str(value, data);
918 }
919
920
increment_mdp_data_at(Register mdp_in,int constant,bool decrement)921 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in,
922 int constant,
923 bool decrement) {
924 increment_mdp_data_at(mdp_in, noreg, constant, decrement);
925 }
926
increment_mdp_data_at(Register mdp_in,Register reg,int constant,bool decrement)927 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in,
928 Register reg,
929 int constant,
930 bool decrement) {
931 assert(ProfileInterpreter, "must be profiling interpreter");
932 // %%% this does 64bit counters at best it is wasting space
933 // at worst it is a rare bug when counters overflow
934
935 assert_different_registers(rscratch2, rscratch1, mdp_in, reg);
936
937 Address addr1(mdp_in, constant);
938 Address addr2(rscratch2, reg, Address::lsl(0));
939 Address &addr = addr1;
940 if (reg != noreg) {
941 lea(rscratch2, addr1);
942 addr = addr2;
943 }
944
945 if (decrement) {
946 // Decrement the register. Set condition codes.
947 // Intel does this
948 // addptr(data, (int32_t) -DataLayout::counter_increment);
949 // If the decrement causes the counter to overflow, stay negative
950 // Label L;
951 // jcc(Assembler::negative, L);
952 // addptr(data, (int32_t) DataLayout::counter_increment);
953 // so we do this
954 ldr(rscratch1, addr);
955 subs(rscratch1, rscratch1, (unsigned)DataLayout::counter_increment);
956 Label L;
957 br(Assembler::LO, L); // skip store if counter underflow
958 str(rscratch1, addr);
959 bind(L);
960 } else {
961 assert(DataLayout::counter_increment == 1,
962 "flow-free idiom only works with 1");
963 // Intel does this
964 // Increment the register. Set carry flag.
965 // addptr(data, DataLayout::counter_increment);
966 // If the increment causes the counter to overflow, pull back by 1.
967 // sbbptr(data, (int32_t)0);
968 // so we do this
969 ldr(rscratch1, addr);
970 adds(rscratch1, rscratch1, DataLayout::counter_increment);
971 Label L;
972 br(Assembler::CS, L); // skip store if counter overflow
973 str(rscratch1, addr);
974 bind(L);
975 }
976 }
977
set_mdp_flag_at(Register mdp_in,int flag_byte_constant)978 void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in,
979 int flag_byte_constant) {
980 assert(ProfileInterpreter, "must be profiling interpreter");
981 int flags_offset = in_bytes(DataLayout::flags_offset());
982 // Set the flag
983 ldrb(rscratch1, Address(mdp_in, flags_offset));
984 orr(rscratch1, rscratch1, flag_byte_constant);
985 strb(rscratch1, Address(mdp_in, flags_offset));
986 }
987
988
test_mdp_data_at(Register mdp_in,int offset,Register value,Register test_value_out,Label & not_equal_continue)989 void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in,
990 int offset,
991 Register value,
992 Register test_value_out,
993 Label& not_equal_continue) {
994 assert(ProfileInterpreter, "must be profiling interpreter");
995 if (test_value_out == noreg) {
996 ldr(rscratch1, Address(mdp_in, offset));
997 cmp(value, rscratch1);
998 } else {
999 // Put the test value into a register, so caller can use it:
1000 ldr(test_value_out, Address(mdp_in, offset));
1001 cmp(value, test_value_out);
1002 }
1003 br(Assembler::NE, not_equal_continue);
1004 }
1005
1006
update_mdp_by_offset(Register mdp_in,int offset_of_disp)1007 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in,
1008 int offset_of_disp) {
1009 assert(ProfileInterpreter, "must be profiling interpreter");
1010 ldr(rscratch1, Address(mdp_in, offset_of_disp));
1011 add(mdp_in, mdp_in, rscratch1, LSL);
1012 str(mdp_in, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize));
1013 }
1014
1015
update_mdp_by_offset(Register mdp_in,Register reg,int offset_of_disp)1016 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in,
1017 Register reg,
1018 int offset_of_disp) {
1019 assert(ProfileInterpreter, "must be profiling interpreter");
1020 lea(rscratch1, Address(mdp_in, offset_of_disp));
1021 ldr(rscratch1, Address(rscratch1, reg, Address::lsl(0)));
1022 add(mdp_in, mdp_in, rscratch1, LSL);
1023 str(mdp_in, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize));
1024 }
1025
1026
update_mdp_by_constant(Register mdp_in,int constant)1027 void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in,
1028 int constant) {
1029 assert(ProfileInterpreter, "must be profiling interpreter");
1030 add(mdp_in, mdp_in, (unsigned)constant);
1031 str(mdp_in, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize));
1032 }
1033
1034
update_mdp_for_ret(Register return_bci)1035 void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) {
1036 assert(ProfileInterpreter, "must be profiling interpreter");
1037 // save/restore across call_VM
1038 stp(zr, return_bci, Address(pre(sp, -2 * wordSize)));
1039 call_VM(noreg,
1040 CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret),
1041 return_bci);
1042 ldp(zr, return_bci, Address(post(sp, 2 * wordSize)));
1043 }
1044
1045
profile_taken_branch(Register mdp,Register bumped_count)1046 void InterpreterMacroAssembler::profile_taken_branch(Register mdp,
1047 Register bumped_count) {
1048 if (ProfileInterpreter) {
1049 Label profile_continue;
1050
1051 // If no method data exists, go to profile_continue.
1052 // Otherwise, assign to mdp
1053 test_method_data_pointer(mdp, profile_continue);
1054
1055 // We are taking a branch. Increment the taken count.
1056 // We inline increment_mdp_data_at to return bumped_count in a register
1057 //increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset()));
1058 Address data(mdp, in_bytes(JumpData::taken_offset()));
1059 ldr(bumped_count, data);
1060 assert(DataLayout::counter_increment == 1,
1061 "flow-free idiom only works with 1");
1062 // Intel does this to catch overflow
1063 // addptr(bumped_count, DataLayout::counter_increment);
1064 // sbbptr(bumped_count, 0);
1065 // so we do this
1066 adds(bumped_count, bumped_count, DataLayout::counter_increment);
1067 Label L;
1068 br(Assembler::CS, L); // skip store if counter overflow
1069 str(bumped_count, data);
1070 bind(L);
1071 // The method data pointer needs to be updated to reflect the new target.
1072 update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset()));
1073 bind(profile_continue);
1074 }
1075 }
1076
1077
profile_not_taken_branch(Register mdp)1078 void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp) {
1079 if (ProfileInterpreter) {
1080 Label profile_continue;
1081
1082 // If no method data exists, go to profile_continue.
1083 test_method_data_pointer(mdp, profile_continue);
1084
1085 // We are taking a branch. Increment the not taken count.
1086 increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset()));
1087
1088 // The method data pointer needs to be updated to correspond to
1089 // the next bytecode
1090 update_mdp_by_constant(mdp, in_bytes(BranchData::branch_data_size()));
1091 bind(profile_continue);
1092 }
1093 }
1094
1095
profile_call(Register mdp)1096 void InterpreterMacroAssembler::profile_call(Register mdp) {
1097 if (ProfileInterpreter) {
1098 Label profile_continue;
1099
1100 // If no method data exists, go to profile_continue.
1101 test_method_data_pointer(mdp, profile_continue);
1102
1103 // We are making a call. Increment the count.
1104 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1105
1106 // The method data pointer needs to be updated to reflect the new target.
1107 update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size()));
1108 bind(profile_continue);
1109 }
1110 }
1111
profile_final_call(Register mdp)1112 void InterpreterMacroAssembler::profile_final_call(Register mdp) {
1113 if (ProfileInterpreter) {
1114 Label profile_continue;
1115
1116 // If no method data exists, go to profile_continue.
1117 test_method_data_pointer(mdp, profile_continue);
1118
1119 // We are making a call. Increment the count.
1120 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1121
1122 // The method data pointer needs to be updated to reflect the new target.
1123 update_mdp_by_constant(mdp,
1124 in_bytes(VirtualCallData::
1125 virtual_call_data_size()));
1126 bind(profile_continue);
1127 }
1128 }
1129
1130
profile_virtual_call(Register receiver,Register mdp,Register reg2,bool receiver_can_be_null)1131 void InterpreterMacroAssembler::profile_virtual_call(Register receiver,
1132 Register mdp,
1133 Register reg2,
1134 bool receiver_can_be_null) {
1135 if (ProfileInterpreter) {
1136 Label profile_continue;
1137
1138 // If no method data exists, go to profile_continue.
1139 test_method_data_pointer(mdp, profile_continue);
1140
1141 Label skip_receiver_profile;
1142 if (receiver_can_be_null) {
1143 Label not_null;
1144 // We are making a call. Increment the count for null receiver.
1145 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1146 b(skip_receiver_profile);
1147 bind(not_null);
1148 }
1149
1150 // Record the receiver type.
1151 record_klass_in_profile(receiver, mdp, reg2, true);
1152 bind(skip_receiver_profile);
1153
1154 // The method data pointer needs to be updated to reflect the new target.
1155 update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size()));
1156 bind(profile_continue);
1157 }
1158 }
1159
1160 // This routine creates a state machine for updating the multi-row
1161 // type profile at a virtual call site (or other type-sensitive bytecode).
1162 // The machine visits each row (of receiver/count) until the receiver type
1163 // is found, or until it runs out of rows. At the same time, it remembers
1164 // the location of the first empty row. (An empty row records null for its
1165 // receiver, and can be allocated for a newly-observed receiver type.)
1166 // Because there are two degrees of freedom in the state, a simple linear
1167 // search will not work; it must be a decision tree. Hence this helper
1168 // function is recursive, to generate the required tree structured code.
1169 // It's the interpreter, so we are trading off code space for speed.
1170 // See below for example code.
record_klass_in_profile_helper(Register receiver,Register mdp,Register reg2,int start_row,Label & done,bool is_virtual_call)1171 void InterpreterMacroAssembler::record_klass_in_profile_helper(
1172 Register receiver, Register mdp,
1173 Register reg2, int start_row,
1174 Label& done, bool is_virtual_call) {
1175 if (TypeProfileWidth == 0) {
1176 if (is_virtual_call) {
1177 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1178 }
1179 #if INCLUDE_JVMCI
1180 else if (EnableJVMCI) {
1181 increment_mdp_data_at(mdp, in_bytes(ReceiverTypeData::nonprofiled_receiver_count_offset()));
1182 }
1183 #endif // INCLUDE_JVMCI
1184 } else {
1185 int non_profiled_offset = -1;
1186 if (is_virtual_call) {
1187 non_profiled_offset = in_bytes(CounterData::count_offset());
1188 }
1189 #if INCLUDE_JVMCI
1190 else if (EnableJVMCI) {
1191 non_profiled_offset = in_bytes(ReceiverTypeData::nonprofiled_receiver_count_offset());
1192 }
1193 #endif // INCLUDE_JVMCI
1194
1195 record_item_in_profile_helper(receiver, mdp, reg2, 0, done, TypeProfileWidth,
1196 &VirtualCallData::receiver_offset, &VirtualCallData::receiver_count_offset, non_profiled_offset);
1197 }
1198 }
1199
record_item_in_profile_helper(Register item,Register mdp,Register reg2,int start_row,Label & done,int total_rows,OffsetFunction item_offset_fn,OffsetFunction item_count_offset_fn,int non_profiled_offset)1200 void InterpreterMacroAssembler::record_item_in_profile_helper(Register item, Register mdp,
1201 Register reg2, int start_row, Label& done, int total_rows,
1202 OffsetFunction item_offset_fn, OffsetFunction item_count_offset_fn,
1203 int non_profiled_offset) {
1204 int last_row = total_rows - 1;
1205 assert(start_row <= last_row, "must be work left to do");
1206 // Test this row for both the item and for null.
1207 // Take any of three different outcomes:
1208 // 1. found item => increment count and goto done
1209 // 2. found null => keep looking for case 1, maybe allocate this cell
1210 // 3. found something else => keep looking for cases 1 and 2
1211 // Case 3 is handled by a recursive call.
1212 for (int row = start_row; row <= last_row; row++) {
1213 Label next_test;
1214 bool test_for_null_also = (row == start_row);
1215
1216 // See if the item is item[n].
1217 int item_offset = in_bytes(item_offset_fn(row));
1218 test_mdp_data_at(mdp, item_offset, item,
1219 (test_for_null_also ? reg2 : noreg),
1220 next_test);
1221 // (Reg2 now contains the item from the CallData.)
1222
1223 // The item is item[n]. Increment count[n].
1224 int count_offset = in_bytes(item_count_offset_fn(row));
1225 increment_mdp_data_at(mdp, count_offset);
1226 b(done);
1227 bind(next_test);
1228
1229 if (test_for_null_also) {
1230 Label found_null;
1231 // Failed the equality check on item[n]... Test for null.
1232 if (start_row == last_row) {
1233 // The only thing left to do is handle the null case.
1234 if (non_profiled_offset >= 0) {
1235 cbz(reg2, found_null);
1236 // Item did not match any saved item and there is no empty row for it.
1237 // Increment total counter to indicate polymorphic case.
1238 increment_mdp_data_at(mdp, non_profiled_offset);
1239 b(done);
1240 bind(found_null);
1241 } else {
1242 cbnz(reg2, done);
1243 }
1244 break;
1245 }
1246 // Since null is rare, make it be the branch-taken case.
1247 cbz(reg2, found_null);
1248
1249 // Put all the "Case 3" tests here.
1250 record_item_in_profile_helper(item, mdp, reg2, start_row + 1, done, total_rows,
1251 item_offset_fn, item_count_offset_fn, non_profiled_offset);
1252
1253 // Found a null. Keep searching for a matching item,
1254 // but remember that this is an empty (unused) slot.
1255 bind(found_null);
1256 }
1257 }
1258
1259 // In the fall-through case, we found no matching item, but we
1260 // observed the item[start_row] is NULL.
1261
1262 // Fill in the item field and increment the count.
1263 int item_offset = in_bytes(item_offset_fn(start_row));
1264 set_mdp_data_at(mdp, item_offset, item);
1265 int count_offset = in_bytes(item_count_offset_fn(start_row));
1266 mov(reg2, DataLayout::counter_increment);
1267 set_mdp_data_at(mdp, count_offset, reg2);
1268 if (start_row > 0) {
1269 b(done);
1270 }
1271 }
1272
1273 // Example state machine code for three profile rows:
1274 // // main copy of decision tree, rooted at row[1]
1275 // if (row[0].rec == rec) { row[0].incr(); goto done; }
1276 // if (row[0].rec != NULL) {
1277 // // inner copy of decision tree, rooted at row[1]
1278 // if (row[1].rec == rec) { row[1].incr(); goto done; }
1279 // if (row[1].rec != NULL) {
1280 // // degenerate decision tree, rooted at row[2]
1281 // if (row[2].rec == rec) { row[2].incr(); goto done; }
1282 // if (row[2].rec != NULL) { count.incr(); goto done; } // overflow
1283 // row[2].init(rec); goto done;
1284 // } else {
1285 // // remember row[1] is empty
1286 // if (row[2].rec == rec) { row[2].incr(); goto done; }
1287 // row[1].init(rec); goto done;
1288 // }
1289 // } else {
1290 // // remember row[0] is empty
1291 // if (row[1].rec == rec) { row[1].incr(); goto done; }
1292 // if (row[2].rec == rec) { row[2].incr(); goto done; }
1293 // row[0].init(rec); goto done;
1294 // }
1295 // done:
1296
record_klass_in_profile(Register receiver,Register mdp,Register reg2,bool is_virtual_call)1297 void InterpreterMacroAssembler::record_klass_in_profile(Register receiver,
1298 Register mdp, Register reg2,
1299 bool is_virtual_call) {
1300 assert(ProfileInterpreter, "must be profiling");
1301 Label done;
1302
1303 record_klass_in_profile_helper(receiver, mdp, reg2, 0, done, is_virtual_call);
1304
1305 bind (done);
1306 }
1307
profile_ret(Register return_bci,Register mdp)1308 void InterpreterMacroAssembler::profile_ret(Register return_bci,
1309 Register mdp) {
1310 if (ProfileInterpreter) {
1311 Label profile_continue;
1312 uint row;
1313
1314 // If no method data exists, go to profile_continue.
1315 test_method_data_pointer(mdp, profile_continue);
1316
1317 // Update the total ret count.
1318 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1319
1320 for (row = 0; row < RetData::row_limit(); row++) {
1321 Label next_test;
1322
1323 // See if return_bci is equal to bci[n]:
1324 test_mdp_data_at(mdp,
1325 in_bytes(RetData::bci_offset(row)),
1326 return_bci, noreg,
1327 next_test);
1328
1329 // return_bci is equal to bci[n]. Increment the count.
1330 increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row)));
1331
1332 // The method data pointer needs to be updated to reflect the new target.
1333 update_mdp_by_offset(mdp,
1334 in_bytes(RetData::bci_displacement_offset(row)));
1335 b(profile_continue);
1336 bind(next_test);
1337 }
1338
1339 update_mdp_for_ret(return_bci);
1340
1341 bind(profile_continue);
1342 }
1343 }
1344
profile_null_seen(Register mdp)1345 void InterpreterMacroAssembler::profile_null_seen(Register mdp) {
1346 if (ProfileInterpreter) {
1347 Label profile_continue;
1348
1349 // If no method data exists, go to profile_continue.
1350 test_method_data_pointer(mdp, profile_continue);
1351
1352 set_mdp_flag_at(mdp, BitData::null_seen_byte_constant());
1353
1354 // The method data pointer needs to be updated.
1355 int mdp_delta = in_bytes(BitData::bit_data_size());
1356 if (TypeProfileCasts) {
1357 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
1358 }
1359 update_mdp_by_constant(mdp, mdp_delta);
1360
1361 bind(profile_continue);
1362 }
1363 }
1364
profile_typecheck_failed(Register mdp)1365 void InterpreterMacroAssembler::profile_typecheck_failed(Register mdp) {
1366 if (ProfileInterpreter && TypeProfileCasts) {
1367 Label profile_continue;
1368
1369 // If no method data exists, go to profile_continue.
1370 test_method_data_pointer(mdp, profile_continue);
1371
1372 int count_offset = in_bytes(CounterData::count_offset());
1373 // Back up the address, since we have already bumped the mdp.
1374 count_offset -= in_bytes(VirtualCallData::virtual_call_data_size());
1375
1376 // *Decrement* the counter. We expect to see zero or small negatives.
1377 increment_mdp_data_at(mdp, count_offset, true);
1378
1379 bind (profile_continue);
1380 }
1381 }
1382
profile_typecheck(Register mdp,Register klass,Register reg2)1383 void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass, Register reg2) {
1384 if (ProfileInterpreter) {
1385 Label profile_continue;
1386
1387 // If no method data exists, go to profile_continue.
1388 test_method_data_pointer(mdp, profile_continue);
1389
1390 // The method data pointer needs to be updated.
1391 int mdp_delta = in_bytes(BitData::bit_data_size());
1392 if (TypeProfileCasts) {
1393 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
1394
1395 // Record the object type.
1396 record_klass_in_profile(klass, mdp, reg2, false);
1397 }
1398 update_mdp_by_constant(mdp, mdp_delta);
1399
1400 bind(profile_continue);
1401 }
1402 }
1403
profile_switch_default(Register mdp)1404 void InterpreterMacroAssembler::profile_switch_default(Register mdp) {
1405 if (ProfileInterpreter) {
1406 Label profile_continue;
1407
1408 // If no method data exists, go to profile_continue.
1409 test_method_data_pointer(mdp, profile_continue);
1410
1411 // Update the default case count
1412 increment_mdp_data_at(mdp,
1413 in_bytes(MultiBranchData::default_count_offset()));
1414
1415 // The method data pointer needs to be updated.
1416 update_mdp_by_offset(mdp,
1417 in_bytes(MultiBranchData::
1418 default_displacement_offset()));
1419
1420 bind(profile_continue);
1421 }
1422 }
1423
profile_switch_case(Register index,Register mdp,Register reg2)1424 void InterpreterMacroAssembler::profile_switch_case(Register index,
1425 Register mdp,
1426 Register reg2) {
1427 if (ProfileInterpreter) {
1428 Label profile_continue;
1429
1430 // If no method data exists, go to profile_continue.
1431 test_method_data_pointer(mdp, profile_continue);
1432
1433 // Build the base (index * per_case_size_in_bytes()) +
1434 // case_array_offset_in_bytes()
1435 movw(reg2, in_bytes(MultiBranchData::per_case_size()));
1436 movw(rscratch1, in_bytes(MultiBranchData::case_array_offset()));
1437 Assembler::maddw(index, index, reg2, rscratch1);
1438
1439 // Update the case count
1440 increment_mdp_data_at(mdp,
1441 index,
1442 in_bytes(MultiBranchData::relative_count_offset()));
1443
1444 // The method data pointer needs to be updated.
1445 update_mdp_by_offset(mdp,
1446 index,
1447 in_bytes(MultiBranchData::
1448 relative_displacement_offset()));
1449
1450 bind(profile_continue);
1451 }
1452 }
1453
verify_oop(Register reg,TosState state)1454 void InterpreterMacroAssembler::verify_oop(Register reg, TosState state) {
1455 if (state == atos) {
1456 MacroAssembler::verify_oop(reg);
1457 }
1458 }
1459
verify_FPU(int stack_depth,TosState state)1460 void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) { ; }
1461
1462
notify_method_entry()1463 void InterpreterMacroAssembler::notify_method_entry() {
1464 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to
1465 // track stack depth. If it is possible to enter interp_only_mode we add
1466 // the code to check if the event should be sent.
1467 if (JvmtiExport::can_post_interpreter_events()) {
1468 Label L;
1469 ldrw(r3, Address(rthread, JavaThread::interp_only_mode_offset()));
1470 cbzw(r3, L);
1471 call_VM(noreg, CAST_FROM_FN_PTR(address,
1472 InterpreterRuntime::post_method_entry));
1473 bind(L);
1474 }
1475
1476 {
1477 SkipIfEqual skip(this, &DTraceMethodProbes, false);
1478 get_method(c_rarg1);
1479 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry),
1480 rthread, c_rarg1);
1481 }
1482
1483 // RedefineClasses() tracing support for obsolete method entry
1484 if (log_is_enabled(Trace, redefine, class, obsolete)) {
1485 get_method(c_rarg1);
1486 call_VM_leaf(
1487 CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry),
1488 rthread, c_rarg1);
1489 }
1490
1491 }
1492
1493
notify_method_exit(TosState state,NotifyMethodExitMode mode)1494 void InterpreterMacroAssembler::notify_method_exit(
1495 TosState state, NotifyMethodExitMode mode) {
1496 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to
1497 // track stack depth. If it is possible to enter interp_only_mode we add
1498 // the code to check if the event should be sent.
1499 if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) {
1500 Label L;
1501 // Note: frame::interpreter_frame_result has a dependency on how the
1502 // method result is saved across the call to post_method_exit. If this
1503 // is changed then the interpreter_frame_result implementation will
1504 // need to be updated too.
1505
1506 // template interpreter will leave the result on the top of the stack.
1507 push(state);
1508 ldrw(r3, Address(rthread, JavaThread::interp_only_mode_offset()));
1509 cbz(r3, L);
1510 call_VM(noreg,
1511 CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit));
1512 bind(L);
1513 pop(state);
1514 }
1515
1516 {
1517 SkipIfEqual skip(this, &DTraceMethodProbes, false);
1518 push(state);
1519 get_method(c_rarg1);
1520 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit),
1521 rthread, c_rarg1);
1522 pop(state);
1523 }
1524 }
1525
1526
1527 // Jump if ((*counter_addr += increment) & mask) satisfies the condition.
increment_mask_and_jump(Address counter_addr,int increment,Address mask,Register scratch,Register scratch2,bool preloaded,Condition cond,Label * where)1528 void InterpreterMacroAssembler::increment_mask_and_jump(Address counter_addr,
1529 int increment, Address mask,
1530 Register scratch, Register scratch2,
1531 bool preloaded, Condition cond,
1532 Label* where) {
1533 if (!preloaded) {
1534 ldrw(scratch, counter_addr);
1535 }
1536 add(scratch, scratch, increment);
1537 strw(scratch, counter_addr);
1538 ldrw(scratch2, mask);
1539 ands(scratch, scratch, scratch2);
1540 br(cond, *where);
1541 }
1542
call_VM_leaf_base(address entry_point,int number_of_arguments)1543 void InterpreterMacroAssembler::call_VM_leaf_base(address entry_point,
1544 int number_of_arguments) {
1545 // interpreter specific
1546 //
1547 // Note: No need to save/restore rbcp & rlocals pointer since these
1548 // are callee saved registers and no blocking/ GC can happen
1549 // in leaf calls.
1550 #ifdef ASSERT
1551 {
1552 Label L;
1553 ldr(rscratch1, Address(rfp, frame::interpreter_frame_last_sp_offset * wordSize));
1554 cbz(rscratch1, L);
1555 stop("InterpreterMacroAssembler::call_VM_leaf_base:"
1556 " last_sp != NULL");
1557 bind(L);
1558 }
1559 #endif /* ASSERT */
1560 // super call
1561 MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments);
1562 }
1563
call_VM_base(Register oop_result,Register java_thread,Register last_java_sp,address entry_point,int number_of_arguments,bool check_exceptions)1564 void InterpreterMacroAssembler::call_VM_base(Register oop_result,
1565 Register java_thread,
1566 Register last_java_sp,
1567 address entry_point,
1568 int number_of_arguments,
1569 bool check_exceptions) {
1570 // interpreter specific
1571 //
1572 // Note: Could avoid restoring locals ptr (callee saved) - however doesn't
1573 // really make a difference for these runtime calls, since they are
1574 // slow anyway. Btw., bcp must be saved/restored since it may change
1575 // due to GC.
1576 // assert(java_thread == noreg , "not expecting a precomputed java thread");
1577 save_bcp();
1578 #ifdef ASSERT
1579 {
1580 Label L;
1581 ldr(rscratch1, Address(rfp, frame::interpreter_frame_last_sp_offset * wordSize));
1582 cbz(rscratch1, L);
1583 stop("InterpreterMacroAssembler::call_VM_leaf_base:"
1584 " last_sp != NULL");
1585 bind(L);
1586 }
1587 #endif /* ASSERT */
1588 // super call
1589 MacroAssembler::call_VM_base(oop_result, noreg, last_java_sp,
1590 entry_point, number_of_arguments,
1591 check_exceptions);
1592 // interpreter specific
1593 restore_bcp();
1594 restore_locals();
1595 }
1596
profile_obj_type(Register obj,const Address & mdo_addr)1597 void InterpreterMacroAssembler::profile_obj_type(Register obj, const Address& mdo_addr) {
1598 assert_different_registers(obj, rscratch1);
1599 Label update, next, none;
1600
1601 verify_oop(obj);
1602
1603 cbnz(obj, update);
1604 orptr(mdo_addr, TypeEntries::null_seen);
1605 b(next);
1606
1607 bind(update);
1608 load_klass(obj, obj);
1609
1610 ldr(rscratch1, mdo_addr);
1611 eor(obj, obj, rscratch1);
1612 tst(obj, TypeEntries::type_klass_mask);
1613 br(Assembler::EQ, next); // klass seen before, nothing to
1614 // do. The unknown bit may have been
1615 // set already but no need to check.
1616
1617 tbnz(obj, exact_log2(TypeEntries::type_unknown), next);
1618 // already unknown. Nothing to do anymore.
1619
1620 ldr(rscratch1, mdo_addr);
1621 cbz(rscratch1, none);
1622 cmp(rscratch1, (u1)TypeEntries::null_seen);
1623 br(Assembler::EQ, none);
1624 // There is a chance that the checks above (re-reading profiling
1625 // data from memory) fail if another thread has just set the
1626 // profiling to this obj's klass
1627 ldr(rscratch1, mdo_addr);
1628 eor(obj, obj, rscratch1);
1629 tst(obj, TypeEntries::type_klass_mask);
1630 br(Assembler::EQ, next);
1631
1632 // different than before. Cannot keep accurate profile.
1633 orptr(mdo_addr, TypeEntries::type_unknown);
1634 b(next);
1635
1636 bind(none);
1637 // first time here. Set profile type.
1638 str(obj, mdo_addr);
1639
1640 bind(next);
1641 }
1642
profile_arguments_type(Register mdp,Register callee,Register tmp,bool is_virtual)1643 void InterpreterMacroAssembler::profile_arguments_type(Register mdp, Register callee, Register tmp, bool is_virtual) {
1644 if (!ProfileInterpreter) {
1645 return;
1646 }
1647
1648 if (MethodData::profile_arguments() || MethodData::profile_return()) {
1649 Label profile_continue;
1650
1651 test_method_data_pointer(mdp, profile_continue);
1652
1653 int off_to_start = is_virtual ? in_bytes(VirtualCallData::virtual_call_data_size()) : in_bytes(CounterData::counter_data_size());
1654
1655 ldrb(rscratch1, Address(mdp, in_bytes(DataLayout::tag_offset()) - off_to_start));
1656 cmp(rscratch1, u1(is_virtual ? DataLayout::virtual_call_type_data_tag : DataLayout::call_type_data_tag));
1657 br(Assembler::NE, profile_continue);
1658
1659 if (MethodData::profile_arguments()) {
1660 Label done;
1661 int off_to_args = in_bytes(TypeEntriesAtCall::args_data_offset());
1662
1663 for (int i = 0; i < TypeProfileArgsLimit; i++) {
1664 if (i > 0 || MethodData::profile_return()) {
1665 // If return value type is profiled we may have no argument to profile
1666 ldr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset())));
1667 sub(tmp, tmp, i*TypeStackSlotEntries::per_arg_count());
1668 cmp(tmp, (u1)TypeStackSlotEntries::per_arg_count());
1669 add(rscratch1, mdp, off_to_args);
1670 br(Assembler::LT, done);
1671 }
1672 ldr(tmp, Address(callee, Method::const_offset()));
1673 load_unsigned_short(tmp, Address(tmp, ConstMethod::size_of_parameters_offset()));
1674 // stack offset o (zero based) from the start of the argument
1675 // list, for n arguments translates into offset n - o - 1 from
1676 // the end of the argument list
1677 ldr(rscratch1, Address(mdp, in_bytes(TypeEntriesAtCall::stack_slot_offset(i))));
1678 sub(tmp, tmp, rscratch1);
1679 sub(tmp, tmp, 1);
1680 Address arg_addr = argument_address(tmp);
1681 ldr(tmp, arg_addr);
1682
1683 Address mdo_arg_addr(mdp, in_bytes(TypeEntriesAtCall::argument_type_offset(i)));
1684 profile_obj_type(tmp, mdo_arg_addr);
1685
1686 int to_add = in_bytes(TypeStackSlotEntries::per_arg_size());
1687 off_to_args += to_add;
1688 }
1689
1690 if (MethodData::profile_return()) {
1691 ldr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset())));
1692 sub(tmp, tmp, TypeProfileArgsLimit*TypeStackSlotEntries::per_arg_count());
1693 }
1694
1695 add(rscratch1, mdp, off_to_args);
1696 bind(done);
1697 mov(mdp, rscratch1);
1698
1699 if (MethodData::profile_return()) {
1700 // We're right after the type profile for the last
1701 // argument. tmp is the number of cells left in the
1702 // CallTypeData/VirtualCallTypeData to reach its end. Non null
1703 // if there's a return to profile.
1704 assert(ReturnTypeEntry::static_cell_count() < TypeStackSlotEntries::per_arg_count(), "can't move past ret type");
1705 add(mdp, mdp, tmp, LSL, exact_log2(DataLayout::cell_size));
1706 }
1707 str(mdp, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize));
1708 } else {
1709 assert(MethodData::profile_return(), "either profile call args or call ret");
1710 update_mdp_by_constant(mdp, in_bytes(TypeEntriesAtCall::return_only_size()));
1711 }
1712
1713 // mdp points right after the end of the
1714 // CallTypeData/VirtualCallTypeData, right after the cells for the
1715 // return value type if there's one
1716
1717 bind(profile_continue);
1718 }
1719 }
1720
profile_return_type(Register mdp,Register ret,Register tmp)1721 void InterpreterMacroAssembler::profile_return_type(Register mdp, Register ret, Register tmp) {
1722 assert_different_registers(mdp, ret, tmp, rbcp);
1723 if (ProfileInterpreter && MethodData::profile_return()) {
1724 Label profile_continue, done;
1725
1726 test_method_data_pointer(mdp, profile_continue);
1727
1728 if (MethodData::profile_return_jsr292_only()) {
1729 assert(Method::intrinsic_id_size_in_bytes() == 2, "assuming Method::_intrinsic_id is u2");
1730
1731 // If we don't profile all invoke bytecodes we must make sure
1732 // it's a bytecode we indeed profile. We can't go back to the
1733 // begining of the ProfileData we intend to update to check its
1734 // type because we're right after it and we don't known its
1735 // length
1736 Label do_profile;
1737 ldrb(rscratch1, Address(rbcp, 0));
1738 cmp(rscratch1, (u1)Bytecodes::_invokedynamic);
1739 br(Assembler::EQ, do_profile);
1740 cmp(rscratch1, (u1)Bytecodes::_invokehandle);
1741 br(Assembler::EQ, do_profile);
1742 get_method(tmp);
1743 ldrh(rscratch1, Address(tmp, Method::intrinsic_id_offset_in_bytes()));
1744 subs(zr, rscratch1, vmIntrinsics::_compiledLambdaForm);
1745 br(Assembler::NE, profile_continue);
1746
1747 bind(do_profile);
1748 }
1749
1750 Address mdo_ret_addr(mdp, -in_bytes(ReturnTypeEntry::size()));
1751 mov(tmp, ret);
1752 profile_obj_type(tmp, mdo_ret_addr);
1753
1754 bind(profile_continue);
1755 }
1756 }
1757
profile_parameters_type(Register mdp,Register tmp1,Register tmp2)1758 void InterpreterMacroAssembler::profile_parameters_type(Register mdp, Register tmp1, Register tmp2) {
1759 assert_different_registers(rscratch1, rscratch2, mdp, tmp1, tmp2);
1760 if (ProfileInterpreter && MethodData::profile_parameters()) {
1761 Label profile_continue, done;
1762
1763 test_method_data_pointer(mdp, profile_continue);
1764
1765 // Load the offset of the area within the MDO used for
1766 // parameters. If it's negative we're not profiling any parameters
1767 ldrw(tmp1, Address(mdp, in_bytes(MethodData::parameters_type_data_di_offset()) - in_bytes(MethodData::data_offset())));
1768 tbnz(tmp1, 31, profile_continue); // i.e. sign bit set
1769
1770 // Compute a pointer to the area for parameters from the offset
1771 // and move the pointer to the slot for the last
1772 // parameters. Collect profiling from last parameter down.
1773 // mdo start + parameters offset + array length - 1
1774 add(mdp, mdp, tmp1);
1775 ldr(tmp1, Address(mdp, ArrayData::array_len_offset()));
1776 sub(tmp1, tmp1, TypeStackSlotEntries::per_arg_count());
1777
1778 Label loop;
1779 bind(loop);
1780
1781 int off_base = in_bytes(ParametersTypeData::stack_slot_offset(0));
1782 int type_base = in_bytes(ParametersTypeData::type_offset(0));
1783 int per_arg_scale = exact_log2(DataLayout::cell_size);
1784 add(rscratch1, mdp, off_base);
1785 add(rscratch2, mdp, type_base);
1786
1787 Address arg_off(rscratch1, tmp1, Address::lsl(per_arg_scale));
1788 Address arg_type(rscratch2, tmp1, Address::lsl(per_arg_scale));
1789
1790 // load offset on the stack from the slot for this parameter
1791 ldr(tmp2, arg_off);
1792 neg(tmp2, tmp2);
1793 // read the parameter from the local area
1794 ldr(tmp2, Address(rlocals, tmp2, Address::lsl(Interpreter::logStackElementSize)));
1795
1796 // profile the parameter
1797 profile_obj_type(tmp2, arg_type);
1798
1799 // go to next parameter
1800 subs(tmp1, tmp1, TypeStackSlotEntries::per_arg_count());
1801 br(Assembler::GE, loop);
1802
1803 bind(profile_continue);
1804 }
1805 }
1806