1 /* $NetBSD: ncr5380reg.h,v 1.7 2005/12/11 12:21:28 christos Exp $ */ 2 3 /* 4 * Mach Operating System 5 * Copyright (c) 1991,1990,1989 Carnegie Mellon University 6 * All Rights Reserved. 7 * 8 * Permission to use, copy, modify and distribute this software and its 9 * documentation is hereby granted, provided that both the copyright 10 * notice and this permission notice appear in all copies of the 11 * software, derivative works or modified versions, and any portions 12 * thereof, and that both notices appear in supporting documentation. 13 * 14 * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" 15 * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR 16 * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. 17 * 18 * Carnegie Mellon requests users of this software to return to 19 * 20 * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU 21 * School of Computer Science 22 * Carnegie Mellon University 23 * Pittsburgh PA 15213-3890 24 * 25 * any improvements or extensions that they make and grant Carnegie the 26 * rights to redistribute these changes. 27 */ 28 /* 29 * HISTORY (mach3) 30 * Revision 2.3 91/08/24 12:25:10 af 31 * Moved padding of regmap in impl file. 32 * [91/08/02 04:22:39 af] 33 * 34 * Revision 2.2 91/06/19 16:28:35 rvb 35 * From the NCR data sheets 36 * "NCR 5380 Family, SCSI Protocol Controller Data Manual" 37 * NCR Microelectronics Division, Colorado Spring, 6/98 T01891L 38 * [91/04/21 af] 39 * 40 */ 41 42 /* 43 * File: scsi_5380.h 44 * Author: Alessandro Forin, Carnegie Mellon University 45 * Date: 5/91 46 * 47 * Defines for the NCR 5380 (SCSI chip), aka Am5380 48 */ 49 50 /* 51 * Register map: Note not declared here anymore! 52 * All the 5380 registers are accessed through individual 53 * pointers initialized by MD code. This allows the 5380 54 * MI functions to be shared between MD drivers that have 55 * different padding between the registers (i.e. amiga). 56 */ 57 #if 0 /* example only */ 58 struct ncr5380regs { 59 volatile u_char sci_r0; 60 volatile u_char sci_r1; 61 volatile u_char sci_r2; 62 volatile u_char sci_r3; 63 volatile u_char sci_r4; 64 volatile u_char sci_r5; 65 volatile u_char sci_r6; 66 volatile u_char sci_r7; 67 }; 68 #endif 69 70 /* 71 * Machine-independent code uses these names: 72 */ 73 #define sci_data sci_r0 /* r: Current data */ 74 #define sci_odata sci_r0 /* w: Out data */ 75 76 #define sci_icmd sci_r1 /* rw: Initiator command */ 77 #define sci_mode sci_r2 /* rw: Mode */ 78 #define sci_tcmd sci_r3 /* rw: Target command */ 79 80 #define sci_bus_csr sci_r4 /* r: Bus Status */ 81 #define sci_sel_enb sci_r4 /* w: Select enable */ 82 83 #define sci_csr sci_r5 /* r: Status */ 84 #define sci_dma_send sci_r5 /* w: Start DMA send data */ 85 86 #define sci_idata sci_r6 /* r: Input data */ 87 #define sci_trecv sci_r6 /* w: Start DMA receive, target */ 88 89 #define sci_iack sci_r7 /* r: Interrupt Acknowledge */ 90 #define sci_irecv sci_r7 /* w: Start DMA receive, initiator */ 91 92 93 /* 94 * R1: Initiator command register 95 */ 96 #define SCI_ICMD_DATA 0x01 /* rw: Assert data bus */ 97 #define SCI_ICMD_ATN 0x02 /* rw: Assert ATN signal */ 98 #define SCI_ICMD_SEL 0x04 /* rw: Assert SEL signal */ 99 #define SCI_ICMD_BSY 0x08 /* rw: Assert BSY signal */ 100 #define SCI_ICMD_ACK 0x10 /* rw: Assert ACK signal */ 101 #define SCI_ICMD_LST 0x20 /* r: Lost arbitration */ 102 #define SCI_ICMD_DIFF SCI_ICMD_LST /* w: Differential cable */ 103 #define SCI_ICMD_AIP 0x40 /* r: Arbitration in progress */ 104 #define SCI_ICMD_TEST SCI_ICMD_AIP /* w: Test mode */ 105 #define SCI_ICMD_RST 0x80 /* rw: Assert RST signal */ 106 /* Bits to keep when doing read/modify/write (leave out RST) */ 107 #define SCI_ICMD_RMASK 0x1F 108 109 110 /* 111 * R2: Mode register 112 */ 113 #define SCI_MODE_ARB 0x01 /* rw: Start arbitration */ 114 #define SCI_MODE_DMA 0x02 /* rw: Enable DMA xfers */ 115 #define SCI_MODE_MONBSY 0x04 /* rw: Monitor BSY signal */ 116 #define SCI_MODE_DMA_IE 0x08 /* rw: Enable DMA complete interrupt */ 117 #define SCI_MODE_PERR_IE 0x10 /* rw: Interrupt on parity errors */ 118 #define SCI_MODE_PAR_CHK 0x20 /* rw: Check parity */ 119 #define SCI_MODE_TARGET 0x40 /* rw: Target mode (Initiator if 0) */ 120 #define SCI_MODE_BLOCKDMA 0x80 /* rw: Block-mode DMA handshake */ 121 122 123 /* 124 * R3: Target command register 125 */ 126 #define SCI_TCMD_IO 0x01 /* rw: Assert I/O signal */ 127 #define SCI_TCMD_CD 0x02 /* rw: Assert C/D signal */ 128 #define SCI_TCMD_MSG 0x04 /* rw: Assert MSG signal */ 129 #define SCI_TCMD_PHASE_MASK 0x07 /* r: Mask for current bus phase */ 130 #define SCI_TCMD_REQ 0x08 /* rw: Assert REQ signal */ 131 #define SCI_TCMD_LAST_SENT 0x80 /* ro: Last byte was xferred 132 * (not on 5380/1) */ 133 134 #define SCI_TCMD_PHASE(x) ((x) & 0x7) 135 136 /* 137 * R4: Current (SCSI) Bus status (.sci_bus_csr) 138 */ 139 #define SCI_BUS_DBP 0x01 /* r: Data Bus parity */ 140 #define SCI_BUS_SEL 0x02 /* r: SEL signal */ 141 #define SCI_BUS_IO 0x04 /* r: I/O signal */ 142 #define SCI_BUS_CD 0x08 /* r: C/D signal */ 143 #define SCI_BUS_MSG 0x10 /* r: MSG signal */ 144 #define SCI_BUS_REQ 0x20 /* r: REQ signal */ 145 #define SCI_BUS_BSY 0x40 /* r: BSY signal */ 146 #define SCI_BUS_RST 0x80 /* r: RST signal */ 147 148 #define SCI_BUS_PHASE(x) (((x) >> 2) & 7) 149 150 /* 151 * R5: Bus and Status register (.sci_csr) 152 */ 153 #define SCI_CSR_ACK 0x01 /* r: ACK signal */ 154 #define SCI_CSR_ATN 0x02 /* r: ATN signal */ 155 #define SCI_CSR_DISC 0x04 /* r: Disconnected (BSY==0) */ 156 #define SCI_CSR_PHASE_MATCH 0x08 /* r: Bus and SCI_TCMD match */ 157 #define SCI_CSR_INT 0x10 /* r: Interrupt request */ 158 #define SCI_CSR_PERR 0x20 /* r: Parity error */ 159 #define SCI_CSR_DREQ 0x40 /* r: DMA request */ 160 #define SCI_CSR_DONE 0x80 /* r: DMA count is zero */ 161