1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2002 ARM Limited, All Rights Reserved.
4  */
5 
6 #include <linux/interrupt.h>
7 #include <linux/io.h>
8 #include <linux/irq.h>
9 #include <linux/irqchip/arm-gic.h>
10 
11 #include "irq-gic-common.h"
12 
13 static DEFINE_RAW_SPINLOCK(irq_controller_lock);
14 
15 static const struct gic_kvm_info *gic_kvm_info;
16 
gic_get_kvm_info(void)17 const struct gic_kvm_info *gic_get_kvm_info(void)
18 {
19 	return gic_kvm_info;
20 }
21 
gic_set_kvm_info(const struct gic_kvm_info * info)22 void gic_set_kvm_info(const struct gic_kvm_info *info)
23 {
24 	BUG_ON(gic_kvm_info != NULL);
25 	gic_kvm_info = info;
26 }
27 
gic_enable_of_quirks(const struct device_node * np,const struct gic_quirk * quirks,void * data)28 void gic_enable_of_quirks(const struct device_node *np,
29 			  const struct gic_quirk *quirks, void *data)
30 {
31 	for (; quirks->desc; quirks++) {
32 		if (!of_device_is_compatible(np, quirks->compatible))
33 			continue;
34 		if (quirks->init(data))
35 			pr_info("GIC: enabling workaround for %s\n",
36 				quirks->desc);
37 	}
38 }
39 
gic_enable_quirks(u32 iidr,const struct gic_quirk * quirks,void * data)40 void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
41 		void *data)
42 {
43 	for (; quirks->desc; quirks++) {
44 		if (quirks->compatible)
45 			continue;
46 		if (quirks->iidr != (quirks->mask & iidr))
47 			continue;
48 		if (quirks->init(data))
49 			pr_info("GIC: enabling workaround for %s\n",
50 				quirks->desc);
51 	}
52 }
53 
gic_configure_irq(unsigned int irq,unsigned int type,void __iomem * base,void (* sync_access)(void))54 int gic_configure_irq(unsigned int irq, unsigned int type,
55 		       void __iomem *base, void (*sync_access)(void))
56 {
57 	u32 confmask = 0x2 << ((irq % 16) * 2);
58 	u32 confoff = (irq / 16) * 4;
59 	u32 val, oldval;
60 	int ret = 0;
61 	unsigned long flags;
62 
63 	/*
64 	 * Read current configuration register, and insert the config
65 	 * for "irq", depending on "type".
66 	 */
67 	raw_spin_lock_irqsave(&irq_controller_lock, flags);
68 	val = oldval = readl_relaxed(base + confoff);
69 	if (type & IRQ_TYPE_LEVEL_MASK)
70 		val &= ~confmask;
71 	else if (type & IRQ_TYPE_EDGE_BOTH)
72 		val |= confmask;
73 
74 	/* If the current configuration is the same, then we are done */
75 	if (val == oldval) {
76 		raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
77 		return 0;
78 	}
79 
80 	/*
81 	 * Write back the new configuration, and possibly re-enable
82 	 * the interrupt. If we fail to write a new configuration for
83 	 * an SPI then WARN and return an error. If we fail to write the
84 	 * configuration for a PPI this is most likely because the GIC
85 	 * does not allow us to set the configuration or we are in a
86 	 * non-secure mode, and hence it may not be catastrophic.
87 	 */
88 	writel_relaxed(val, base + confoff);
89 	if (readl_relaxed(base + confoff) != val)
90 		ret = -EINVAL;
91 
92 	raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
93 
94 	if (sync_access)
95 		sync_access();
96 
97 	return ret;
98 }
99 
gic_dist_config(void __iomem * base,int gic_irqs,void (* sync_access)(void))100 void gic_dist_config(void __iomem *base, int gic_irqs,
101 		     void (*sync_access)(void))
102 {
103 	unsigned int i;
104 
105 	/*
106 	 * Set all global interrupts to be level triggered, active low.
107 	 */
108 	for (i = 32; i < gic_irqs; i += 16)
109 		writel_relaxed(GICD_INT_ACTLOW_LVLTRIG,
110 					base + GIC_DIST_CONFIG + i / 4);
111 
112 	/*
113 	 * Set priority on all global interrupts.
114 	 */
115 	for (i = 32; i < gic_irqs; i += 4)
116 		writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i);
117 
118 	/*
119 	 * Deactivate and disable all SPIs. Leave the PPI and SGIs
120 	 * alone as they are in the redistributor registers on GICv3.
121 	 */
122 	for (i = 32; i < gic_irqs; i += 32) {
123 		writel_relaxed(GICD_INT_EN_CLR_X32,
124 			       base + GIC_DIST_ACTIVE_CLEAR + i / 8);
125 		writel_relaxed(GICD_INT_EN_CLR_X32,
126 			       base + GIC_DIST_ENABLE_CLEAR + i / 8);
127 	}
128 
129 	if (sync_access)
130 		sync_access();
131 }
132 
gic_cpu_config(void __iomem * base,int nr,void (* sync_access)(void))133 void gic_cpu_config(void __iomem *base, int nr, void (*sync_access)(void))
134 {
135 	int i;
136 
137 	/*
138 	 * Deal with the banked PPI and SGI interrupts - disable all
139 	 * private interrupts. Make sure everything is deactivated.
140 	 */
141 	for (i = 0; i < nr; i += 32) {
142 		writel_relaxed(GICD_INT_EN_CLR_X32,
143 			       base + GIC_DIST_ACTIVE_CLEAR + i / 8);
144 		writel_relaxed(GICD_INT_EN_CLR_X32,
145 			       base + GIC_DIST_ENABLE_CLEAR + i / 8);
146 	}
147 
148 	/*
149 	 * Set priority on PPI and SGI interrupts
150 	 */
151 	for (i = 0; i < nr; i += 4)
152 		writel_relaxed(GICD_INT_DEF_PRI_X4,
153 					base + GIC_DIST_PRI + i * 4 / 4);
154 
155 	if (sync_access)
156 		sync_access();
157 }
158