1 /*
2  * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved.
3  *
4  * This software is available to you under a choice of one of two
5  * licenses.  You may choose to be licensed under the terms of the GNU
6  * General Public License (GPL) Version 2, available from the file
7  * COPYING in the main directory of this source tree, or the
8  * OpenIB.org BSD license below:
9  *
10  *     Redistribution and use in source and binary forms, with or
11  *     without modification, are permitted provided that the following
12  *     conditions are met:
13  *
14  *      - Redistributions of source code must retain the above
15  *        copyright notice, this list of conditions and the following
16  *        disclaimer.
17  *
18  *      - Redistributions in binary form must reproduce the above
19  *        copyright notice, this list of conditions and the following
20  *        disclaimer in the documentation and/or other materials
21  *        provided with the distribution.
22  *
23  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30  * SOFTWARE.
31  */
32 #include "common.h"
33 
34 /* VSC8211 PHY specific registers. */
35 enum {
36 	VSC8211_SIGDET_CTRL = 19,
37 	VSC8211_EXT_CTRL = 23,
38 	VSC8211_INTR_ENABLE = 25,
39 	VSC8211_INTR_STATUS = 26,
40 	VSC8211_LED_CTRL = 27,
41 	VSC8211_AUX_CTRL_STAT = 28,
42 	VSC8211_EXT_PAGE_AXS = 31,
43 };
44 
45 enum {
46 	VSC_INTR_RX_ERR = 1 << 0,
47 	VSC_INTR_MS_ERR = 1 << 1,  /* master/slave resolution error */
48 	VSC_INTR_CABLE = 1 << 2,  /* cable impairment */
49 	VSC_INTR_FALSE_CARR = 1 << 3,  /* false carrier */
50 	VSC_INTR_MEDIA_CHG = 1 << 4,  /* AMS media change */
51 	VSC_INTR_RX_FIFO = 1 << 5,  /* Rx FIFO over/underflow */
52 	VSC_INTR_TX_FIFO = 1 << 6,  /* Tx FIFO over/underflow */
53 	VSC_INTR_DESCRAMBL = 1 << 7,  /* descrambler lock-lost */
54 	VSC_INTR_SYMBOL_ERR = 1 << 8,  /* symbol error */
55 	VSC_INTR_NEG_DONE = 1 << 10, /* autoneg done */
56 	VSC_INTR_NEG_ERR = 1 << 11, /* autoneg error */
57 	VSC_INTR_DPLX_CHG = 1 << 12, /* duplex change */
58 	VSC_INTR_LINK_CHG = 1 << 13, /* link change */
59 	VSC_INTR_SPD_CHG = 1 << 14, /* speed change */
60 	VSC_INTR_ENABLE = 1 << 15, /* interrupt enable */
61 };
62 
63 enum {
64 	VSC_CTRL_CLAUSE37_VIEW = 1 << 4,   /* Switch to Clause 37 view */
65 	VSC_CTRL_MEDIA_MODE_HI = 0xf000    /* High part of media mode select */
66 };
67 
68 #define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG | VSC_INTR_NEG_ERR | \
69 			   VSC_INTR_DPLX_CHG | VSC_INTR_SPD_CHG | \
70 	 		   VSC_INTR_NEG_DONE)
71 #define INTR_MASK (CFG_CHG_INTR_MASK | VSC_INTR_TX_FIFO | VSC_INTR_RX_FIFO | \
72 		   VSC_INTR_ENABLE)
73 
74 /* PHY specific auxiliary control & status register fields */
75 #define S_ACSR_ACTIPHY_TMR    0
76 #define M_ACSR_ACTIPHY_TMR    0x3
77 #define V_ACSR_ACTIPHY_TMR(x) ((x) << S_ACSR_ACTIPHY_TMR)
78 
79 #define S_ACSR_SPEED    3
80 #define M_ACSR_SPEED    0x3
81 #define G_ACSR_SPEED(x) (((x) >> S_ACSR_SPEED) & M_ACSR_SPEED)
82 
83 #define S_ACSR_DUPLEX 5
84 #define F_ACSR_DUPLEX (1 << S_ACSR_DUPLEX)
85 
86 #define S_ACSR_ACTIPHY 6
87 #define F_ACSR_ACTIPHY (1 << S_ACSR_ACTIPHY)
88 
89 /*
90  * Reset the PHY.  This PHY completes reset immediately so we never wait.
91  */
vsc8211_reset(struct cphy * cphy,int wait)92 static int vsc8211_reset(struct cphy *cphy, int wait)
93 {
94 	return t3_phy_reset(cphy, MDIO_DEVAD_NONE, 0);
95 }
96 
vsc8211_intr_enable(struct cphy * cphy)97 static int vsc8211_intr_enable(struct cphy *cphy)
98 {
99 	return t3_mdio_write(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_ENABLE,
100 			     INTR_MASK);
101 }
102 
vsc8211_intr_disable(struct cphy * cphy)103 static int vsc8211_intr_disable(struct cphy *cphy)
104 {
105 	return t3_mdio_write(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_ENABLE, 0);
106 }
107 
vsc8211_intr_clear(struct cphy * cphy)108 static int vsc8211_intr_clear(struct cphy *cphy)
109 {
110 	u32 val;
111 
112 	/* Clear PHY interrupts by reading the register. */
113 	return t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_STATUS, &val);
114 }
115 
vsc8211_autoneg_enable(struct cphy * cphy)116 static int vsc8211_autoneg_enable(struct cphy *cphy)
117 {
118 	return t3_mdio_change_bits(cphy, MDIO_DEVAD_NONE, MII_BMCR,
119 				   BMCR_PDOWN | BMCR_ISOLATE,
120 				   BMCR_ANENABLE | BMCR_ANRESTART);
121 }
122 
vsc8211_autoneg_restart(struct cphy * cphy)123 static int vsc8211_autoneg_restart(struct cphy *cphy)
124 {
125 	return t3_mdio_change_bits(cphy, MDIO_DEVAD_NONE, MII_BMCR,
126 				   BMCR_PDOWN | BMCR_ISOLATE,
127 				   BMCR_ANRESTART);
128 }
129 
vsc8211_get_link_status(struct cphy * cphy,int * link_ok,int * speed,int * duplex,int * fc)130 static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok,
131 				   int *speed, int *duplex, int *fc)
132 {
133 	unsigned int bmcr, status, lpa, adv;
134 	int err, sp = -1, dplx = -1, pause = 0;
135 
136 	err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMCR, &bmcr);
137 	if (!err)
138 		err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR, &status);
139 	if (err)
140 		return err;
141 
142 	if (link_ok) {
143 		/*
144 		 * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
145 		 * once more to get the current link state.
146 		 */
147 		if (!(status & BMSR_LSTATUS))
148 			err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR,
149 					   &status);
150 		if (err)
151 			return err;
152 		*link_ok = (status & BMSR_LSTATUS) != 0;
153 	}
154 	if (!(bmcr & BMCR_ANENABLE)) {
155 		dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
156 		if (bmcr & BMCR_SPEED1000)
157 			sp = SPEED_1000;
158 		else if (bmcr & BMCR_SPEED100)
159 			sp = SPEED_100;
160 		else
161 			sp = SPEED_10;
162 	} else if (status & BMSR_ANEGCOMPLETE) {
163 		err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_AUX_CTRL_STAT,
164 				   &status);
165 		if (err)
166 			return err;
167 
168 		dplx = (status & F_ACSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
169 		sp = G_ACSR_SPEED(status);
170 		if (sp == 0)
171 			sp = SPEED_10;
172 		else if (sp == 1)
173 			sp = SPEED_100;
174 		else
175 			sp = SPEED_1000;
176 
177 		if (fc && dplx == DUPLEX_FULL) {
178 			err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_LPA,
179 					   &lpa);
180 			if (!err)
181 				err = t3_mdio_read(cphy, MDIO_DEVAD_NONE,
182 						   MII_ADVERTISE, &adv);
183 			if (err)
184 				return err;
185 
186 			if (lpa & adv & ADVERTISE_PAUSE_CAP)
187 				pause = PAUSE_RX | PAUSE_TX;
188 			else if ((lpa & ADVERTISE_PAUSE_CAP) &&
189 				 (lpa & ADVERTISE_PAUSE_ASYM) &&
190 				 (adv & ADVERTISE_PAUSE_ASYM))
191 				pause = PAUSE_TX;
192 			else if ((lpa & ADVERTISE_PAUSE_ASYM) &&
193 				 (adv & ADVERTISE_PAUSE_CAP))
194 				pause = PAUSE_RX;
195 		}
196 	}
197 	if (speed)
198 		*speed = sp;
199 	if (duplex)
200 		*duplex = dplx;
201 	if (fc)
202 		*fc = pause;
203 	return 0;
204 }
205 
vsc8211_get_link_status_fiber(struct cphy * cphy,int * link_ok,int * speed,int * duplex,int * fc)206 static int vsc8211_get_link_status_fiber(struct cphy *cphy, int *link_ok,
207 					 int *speed, int *duplex, int *fc)
208 {
209 	unsigned int bmcr, status, lpa, adv;
210 	int err, sp = -1, dplx = -1, pause = 0;
211 
212 	err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMCR, &bmcr);
213 	if (!err)
214 		err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR, &status);
215 	if (err)
216 		return err;
217 
218 	if (link_ok) {
219 		/*
220 		 * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
221 		 * once more to get the current link state.
222 		 */
223 		if (!(status & BMSR_LSTATUS))
224 			err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR,
225 					   &status);
226 		if (err)
227 			return err;
228 		*link_ok = (status & BMSR_LSTATUS) != 0;
229 	}
230 	if (!(bmcr & BMCR_ANENABLE)) {
231 		dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
232 		if (bmcr & BMCR_SPEED1000)
233 			sp = SPEED_1000;
234 		else if (bmcr & BMCR_SPEED100)
235 			sp = SPEED_100;
236 		else
237 			sp = SPEED_10;
238 	} else if (status & BMSR_ANEGCOMPLETE) {
239 		err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_LPA, &lpa);
240 		if (!err)
241 			err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_ADVERTISE,
242 					   &adv);
243 		if (err)
244 			return err;
245 
246 		if (adv & lpa & ADVERTISE_1000XFULL) {
247 			dplx = DUPLEX_FULL;
248 			sp = SPEED_1000;
249 		} else if (adv & lpa & ADVERTISE_1000XHALF) {
250 			dplx = DUPLEX_HALF;
251 			sp = SPEED_1000;
252 		}
253 
254 		if (fc && dplx == DUPLEX_FULL) {
255 			if (lpa & adv & ADVERTISE_1000XPAUSE)
256 				pause = PAUSE_RX | PAUSE_TX;
257 			else if ((lpa & ADVERTISE_1000XPAUSE) &&
258 				 (adv & lpa & ADVERTISE_1000XPSE_ASYM))
259 				pause = PAUSE_TX;
260 			else if ((lpa & ADVERTISE_1000XPSE_ASYM) &&
261 				 (adv & ADVERTISE_1000XPAUSE))
262 				pause = PAUSE_RX;
263 		}
264 	}
265 	if (speed)
266 		*speed = sp;
267 	if (duplex)
268 		*duplex = dplx;
269 	if (fc)
270 		*fc = pause;
271 	return 0;
272 }
273 
274 #ifdef UNUSED
275 /*
276  * Enable/disable auto MDI/MDI-X in forced link speed mode.
277  */
vsc8211_set_automdi(struct cphy * phy,int enable)278 static int vsc8211_set_automdi(struct cphy *phy, int enable)
279 {
280 	int err;
281 
282 	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0x52b5);
283 	if (err)
284 		return err;
285 
286 	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 18, 0x12);
287 	if (err)
288 		return err;
289 
290 	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 17, enable ? 0x2803 : 0x3003);
291 	if (err)
292 		return err;
293 
294 	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 16, 0x87fa);
295 	if (err)
296 		return err;
297 
298 	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0);
299 	if (err)
300 		return err;
301 
302 	return 0;
303 }
304 
vsc8211_set_speed_duplex(struct cphy * phy,int speed,int duplex)305 int vsc8211_set_speed_duplex(struct cphy *phy, int speed, int duplex)
306 {
307 	int err;
308 
309 	err = t3_set_phy_speed_duplex(phy, speed, duplex);
310 	if (!err)
311 		err = vsc8211_set_automdi(phy, 1);
312 	return err;
313 }
314 #endif /* UNUSED */
315 
vsc8211_power_down(struct cphy * cphy,int enable)316 static int vsc8211_power_down(struct cphy *cphy, int enable)
317 {
318 	return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN,
319 				   enable ? BMCR_PDOWN : 0);
320 }
321 
vsc8211_intr_handler(struct cphy * cphy)322 static int vsc8211_intr_handler(struct cphy *cphy)
323 {
324 	unsigned int cause;
325 	int err, cphy_cause = 0;
326 
327 	err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_STATUS, &cause);
328 	if (err)
329 		return err;
330 
331 	cause &= INTR_MASK;
332 	if (cause & CFG_CHG_INTR_MASK)
333 		cphy_cause |= cphy_cause_link_change;
334 	if (cause & (VSC_INTR_RX_FIFO | VSC_INTR_TX_FIFO))
335 		cphy_cause |= cphy_cause_fifo_error;
336 	return cphy_cause;
337 }
338 
339 static const struct cphy_ops vsc8211_ops = {
340 	.reset = vsc8211_reset,
341 	.intr_enable = vsc8211_intr_enable,
342 	.intr_disable = vsc8211_intr_disable,
343 	.intr_clear = vsc8211_intr_clear,
344 	.intr_handler = vsc8211_intr_handler,
345 	.autoneg_enable = vsc8211_autoneg_enable,
346 	.autoneg_restart = vsc8211_autoneg_restart,
347 	.advertise = t3_phy_advertise,
348 	.set_speed_duplex = t3_set_phy_speed_duplex,
349 	.get_link_status = vsc8211_get_link_status,
350 	.power_down = vsc8211_power_down,
351 };
352 
353 static const struct cphy_ops vsc8211_fiber_ops = {
354 	.reset = vsc8211_reset,
355 	.intr_enable = vsc8211_intr_enable,
356 	.intr_disable = vsc8211_intr_disable,
357 	.intr_clear = vsc8211_intr_clear,
358 	.intr_handler = vsc8211_intr_handler,
359 	.autoneg_enable = vsc8211_autoneg_enable,
360 	.autoneg_restart = vsc8211_autoneg_restart,
361 	.advertise = t3_phy_advertise_fiber,
362 	.set_speed_duplex = t3_set_phy_speed_duplex,
363 	.get_link_status = vsc8211_get_link_status_fiber,
364 	.power_down = vsc8211_power_down,
365 };
366 
t3_vsc8211_phy_prep(struct cphy * phy,struct adapter * adapter,int phy_addr,const struct mdio_ops * mdio_ops)367 int t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter,
368 			int phy_addr, const struct mdio_ops *mdio_ops)
369 {
370 	int err;
371 	unsigned int val;
372 
373 	cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops,
374 		  SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full |
375 		  SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_MII |
376 		  SUPPORTED_TP | SUPPORTED_IRQ, "10/100/1000BASE-T");
377 	msleep(20);       /* PHY needs ~10ms to start responding to MDIO */
378 
379 	err = t3_mdio_read(phy, MDIO_DEVAD_NONE, VSC8211_EXT_CTRL, &val);
380 	if (err)
381 		return err;
382 	if (val & VSC_CTRL_MEDIA_MODE_HI) {
383 		/* copper interface, just need to configure the LEDs */
384 		return t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_LED_CTRL,
385 				     0x100);
386 	}
387 
388 	phy->caps = SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg |
389 		    SUPPORTED_MII | SUPPORTED_FIBRE | SUPPORTED_IRQ;
390 	phy->desc = "1000BASE-X";
391 	phy->ops = &vsc8211_fiber_ops;
392 
393 	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 1);
394 	if (err)
395 		return err;
396 
397 	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_SIGDET_CTRL, 1);
398 	if (err)
399 		return err;
400 
401 	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0);
402 	if (err)
403 		return err;
404 
405 	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_CTRL,
406 			    val | VSC_CTRL_CLAUSE37_VIEW);
407 	if (err)
408 		return err;
409 
410 	err = vsc8211_reset(phy, 0);
411 	if (err)
412 		return err;
413 
414 	udelay(5); /* delay after reset before next SMI */
415 	return 0;
416 }
417