1#
2# This config is an example usage of ktest.pl with a vmware guest
3#
4# VMware Setup:
5# -------------
6# - Edit the Virtual Machine ("Edit virtual machine settings")
7# - Add a Serial Port
8#   - You almost certainly want it set "Connect at power on"
9#   - Select "Use socket (named pipe)"
10#   - Select a name that you'll recognize, like 'ktestserialpipe'
11#   - From: Server
12#   - To: A Virtual Machine
13#   - Save
14# - Make sure you note the name, it will be in the base directory of the
15#   virtual machine (where the "disks" are stored.  The default
16#   is /var/lib/vmware/<virtual machine name>/<the name you entered above>
17#
18# - Make note of the path to the VM
19# </End VMware setup>
20#
21# The guest is called 'Guest' and this would be something that
22# could be run on the host to test a virtual machine target.
23
24MACHINE = Guest
25
26# Name of the serial pipe you set in the VMware settings
27VMWARE_SERIAL_NAME = <the name you entered above>
28
29# Define a variable of the name of the VM
30# Noting this needs to be the name of the kmx file, and usually, the
31# name of the directory that it's in.  If the directory and name
32# differ change the VMWARE_VM_DIR accordingly.
33# Please ommit the .kmx extension
34VMWARE_VM_NAME = <virtual machine name>
35
36# VM dir name.  This is usually the same as the virtual machine's name,
37# but not always the case.  Change if they differ
38VMWARE_VM_DIR = ${VMWARE_VM_NAME}
39
40# Base directory that the Virtual machine is contained in
41# /var/lib/vmware is the default on Linux
42VMWARE_VM_BASE_DIR = /var/lib/vmware/${VMWARE_VM_DIR}
43
44# Use ncat to read the unix pipe.  Anything that can read the Unix Pipe
45# and output it's contents to stdout will work
46CONSOLE = /usr/bin/ncat -U ${VMWARE_VM_BASE_DIR}/${VMWARE_SERIAL_NAME}
47
48# Define what version of Workstation you are using
49# This is used by vmrun to use the appropriate appripriate pieces to
50# test this.  In all likelihood you want 'ws' or 'player'
51# Valid options:
52# 	ws - Workstation (Windows or Linux host)
53# 	fusion - Fusion (Mac host)
54# 	player - Using VMware Player (Windows or Linux host)
55# Note: vmrun has to run directly on the host machine
56VMWARE_HOST_TYPE = ws
57
58# VMware provides `vmrun` to allow you to do certain things to the virtual machine
59# This should hard reset the VM and force a boot
60VMWARE_POWER_CYCLE = /usr/bin/vmrun -T ${VMWARE_HOST_TYPE} reset ${VMWARE_VM_BASE_DIR}/${VMWARE_VM_NAME}.kmx nogui
61
62#*************************************#
63# This part is the same as test.conf  #
64#*************************************#
65
66# The include files will set up the type of test to run. Just set TEST to
67# which test you want to run.
68#
69# TESTS = patchcheck, randconfig, boot, test, config-bisect, bisect, min-config
70#
71# See the include/*.conf files that define these tests
72#
73TEST := patchcheck
74
75# Some tests may have more than one test to run. Define MULTI := 1 to run
76# the extra tests.
77MULTI := 0
78
79# In case you want to differentiate which type of system you are testing
80BITS := 64
81
82# REBOOT = none, error, fail, empty
83#  See include/defaults.conf
84REBOOT := empty
85
86
87# The defaults file will set up various settings that can be used by all
88# machine configs.
89INCLUDE include/defaults.conf
90
91
92#*************************************#
93# Now we are different from test.conf #
94#*************************************#
95
96
97# The example here assumes that Guest is running a Fedora release
98# that uses dracut for its initfs. The POST_INSTALL will be executed
99# after the install of the kernel and modules are complete.
100#
101POST_INSTALL = ${SSH} /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
102
103# Guests sometimes get stuck on reboot. We wait 3 seconds after running
104# the reboot command and then  do a full power-cycle of the guest.
105# This forces the guest to restart.
106#
107POWERCYCLE_AFTER_REBOOT = 3
108
109# We do the same after the halt command, but this time we wait 20 seconds.
110POWEROFF_AFTER_HALT = 20
111
112
113# As the defaults.conf file has a POWER_CYCLE option already defined,
114# and options can not be defined in the same section more than once
115# (all DEFAULTS sections are considered the same). We use the
116# DEFAULTS OVERRIDE to tell ktest.pl to ignore the previous defined
117# options, for the options set in the OVERRIDE section.
118#
119DEFAULTS OVERRIDE
120
121# Instead of using the default POWER_CYCLE option defined in
122# defaults.conf, we use virsh to cycle it. To do so, we destroy
123# the guest, wait 5 seconds, and then start it up again.
124# Crude, but effective.
125#
126POWER_CYCLE = ${VMWARE_POWER_CYCLE}
127
128
129DEFAULTS
130
131# The following files each handle a different test case.
132# Having them included allows you to set up more than one machine and share
133# the same tests.
134INCLUDE include/patchcheck.conf
135INCLUDE include/tests.conf
136INCLUDE include/bisect.conf
137INCLUDE include/min-config.conf
138