1# aclocal.m4 generated automatically by aclocal 1.5 2 3# Copyright 1996, 1997, 1998, 1999, 2000, 2001 4# Free Software Foundation, Inc. 5# This file is free software; the Free Software Foundation 6# gives unlimited permission to copy and/or distribute it, 7# with or without modifications, as long as this notice is preserved. 8 9# This program is distributed in the hope that it will be useful, 10# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 11# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 12# PARTICULAR PURPOSE. 13 14# Do all the work for Automake. This macro actually does too much -- 15# some checks are only needed if your package does certain things. 16# But this isn't really a big deal. 17 18# serial 5 19 20# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be 21# written in clear, in which case automake, when reading aclocal.m4, 22# will think it sees a *use*, and therefore will trigger all it's 23# C support machinery. Also note that it means that autoscan, seeing 24# CC etc. in the Makefile, will ask for an AC_PROG_CC use... 25 26 27# We require 2.13 because we rely on SHELL being computed by configure. 28AC_PREREQ([2.13]) 29 30# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) 31# ----------------------------------------------------------- 32# If MACRO-NAME is provided do IF-PROVIDED, else IF-NOT-PROVIDED. 33# The purpose of this macro is to provide the user with a means to 34# check macros which are provided without letting her know how the 35# information is coded. 36# If this macro is not defined by Autoconf, define it here. 37ifdef([AC_PROVIDE_IFELSE], 38 [], 39 [define([AC_PROVIDE_IFELSE], 40 [ifdef([AC_PROVIDE_$1], 41 [$2], [$3])])]) 42 43 44# AM_INIT_AUTOMAKE(PACKAGE,VERSION, [NO-DEFINE]) 45# ---------------------------------------------- 46AC_DEFUN([AM_INIT_AUTOMAKE], 47[AC_REQUIRE([AC_PROG_INSTALL])dnl 48# test to see if srcdir already configured 49if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" && 50 test -f $srcdir/config.status; then 51 AC_MSG_ERROR([source directory already configured; run \"make distclean\" there first]) 52fi 53 54# Define the identity of the package. 55PACKAGE=$1 56AC_SUBST(PACKAGE)dnl 57VERSION=$2 58AC_SUBST(VERSION)dnl 59ifelse([$3],, 60[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) 61AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])]) 62 63# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow 64# the ones we care about. 65ifdef([m4_pattern_allow], 66 [m4_pattern_allow([^AM_[A-Z]+FLAGS])])dnl 67 68# Autoconf 2.50 always computes EXEEXT. However we need to be 69# compatible with 2.13, for now. So we always define EXEEXT, but we 70# don't compute it. 71AC_SUBST(EXEEXT) 72# Similar for OBJEXT -- only we only use OBJEXT if the user actually 73# requests that it be used. This is a bit dumb. 74: ${OBJEXT=o} 75AC_SUBST(OBJEXT) 76 77# Some tools Automake needs. 78AC_REQUIRE([AM_SANITY_CHECK])dnl 79AC_REQUIRE([AC_ARG_PROGRAM])dnl 80AM_MISSING_PROG(ACLOCAL, aclocal) 81AM_MISSING_PROG(AUTOCONF, autoconf) 82AM_MISSING_PROG(AUTOMAKE, automake) 83AM_MISSING_PROG(AUTOHEADER, autoheader) 84AM_MISSING_PROG(MAKEINFO, makeinfo) 85AM_MISSING_PROG(AMTAR, tar) 86AM_PROG_INSTALL_SH 87AM_PROG_INSTALL_STRIP 88# We need awk for the "check" target. The system "awk" is bad on 89# some platforms. 90AC_REQUIRE([AC_PROG_AWK])dnl 91AC_REQUIRE([AC_PROG_MAKE_SET])dnl 92AC_REQUIRE([AM_DEP_TRACK])dnl 93AC_REQUIRE([AM_SET_DEPDIR])dnl 94AC_PROVIDE_IFELSE([AC_PROG_][CC], 95 [_AM_DEPENDENCIES(CC)], 96 [define([AC_PROG_][CC], 97 defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl 98AC_PROVIDE_IFELSE([AC_PROG_][CXX], 99 [_AM_DEPENDENCIES(CXX)], 100 [define([AC_PROG_][CXX], 101 defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl 102]) 103 104# 105# Check to make sure that the build environment is sane. 106# 107 108# serial 3 109 110# AM_SANITY_CHECK 111# --------------- 112AC_DEFUN([AM_SANITY_CHECK], 113[AC_MSG_CHECKING([whether build environment is sane]) 114# Just in case 115sleep 1 116echo timestamp > conftest.file 117# Do `set' in a subshell so we don't clobber the current shell's 118# arguments. Must try -L first in case configure is actually a 119# symlink; some systems play weird games with the mod time of symlinks 120# (eg FreeBSD returns the mod time of the symlink's containing 121# directory). 122if ( 123 set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` 124 if test "$[*]" = "X"; then 125 # -L didn't work. 126 set X `ls -t $srcdir/configure conftest.file` 127 fi 128 rm -f conftest.file 129 if test "$[*]" != "X $srcdir/configure conftest.file" \ 130 && test "$[*]" != "X conftest.file $srcdir/configure"; then 131 132 # If neither matched, then we have a broken ls. This can happen 133 # if, for instance, CONFIG_SHELL is bash and it inherits a 134 # broken ls alias from the environment. This has actually 135 # happened. Such a system could not be considered "sane". 136 AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken 137alias in your environment]) 138 fi 139 140 test "$[2]" = conftest.file 141 ) 142then 143 # Ok. 144 : 145else 146 AC_MSG_ERROR([newly created file is older than distributed files! 147Check your system clock]) 148fi 149AC_MSG_RESULT(yes)]) 150 151 152# serial 2 153 154# AM_MISSING_PROG(NAME, PROGRAM) 155# ------------------------------ 156AC_DEFUN([AM_MISSING_PROG], 157[AC_REQUIRE([AM_MISSING_HAS_RUN]) 158$1=${$1-"${am_missing_run}$2"} 159AC_SUBST($1)]) 160 161 162# AM_MISSING_HAS_RUN 163# ------------------ 164# Define MISSING if not defined so far and test if it supports --run. 165# If it does, set am_missing_run to use it, otherwise, to nothing. 166AC_DEFUN([AM_MISSING_HAS_RUN], 167[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl 168test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" 169# Use eval to expand $SHELL 170if eval "$MISSING --run true"; then 171 am_missing_run="$MISSING --run " 172else 173 am_missing_run= 174 am_backtick='`' 175 AC_MSG_WARN([${am_backtick}missing' script is too old or missing]) 176fi 177]) 178 179# AM_AUX_DIR_EXPAND 180 181# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets 182# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to 183# `$srcdir', `$srcdir/..', or `$srcdir/../..'. 184# 185# Of course, Automake must honor this variable whenever it calls a 186# tool from the auxiliary directory. The problem is that $srcdir (and 187# therefore $ac_aux_dir as well) can be either absolute or relative, 188# depending on how configure is run. This is pretty annoying, since 189# it makes $ac_aux_dir quite unusable in subdirectories: in the top 190# source directory, any form will work fine, but in subdirectories a 191# relative path needs to be adjusted first. 192# 193# $ac_aux_dir/missing 194# fails when called from a subdirectory if $ac_aux_dir is relative 195# $top_srcdir/$ac_aux_dir/missing 196# fails if $ac_aux_dir is absolute, 197# fails when called from a subdirectory in a VPATH build with 198# a relative $ac_aux_dir 199# 200# The reason of the latter failure is that $top_srcdir and $ac_aux_dir 201# are both prefixed by $srcdir. In an in-source build this is usually 202# harmless because $srcdir is `.', but things will broke when you 203# start a VPATH build or use an absolute $srcdir. 204# 205# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, 206# iff we strip the leading $srcdir from $ac_aux_dir. That would be: 207# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` 208# and then we would define $MISSING as 209# MISSING="\${SHELL} $am_aux_dir/missing" 210# This will work as long as MISSING is not called from configure, because 211# unfortunately $(top_srcdir) has no meaning in configure. 212# However there are other variables, like CC, which are often used in 213# configure, and could therefore not use this "fixed" $ac_aux_dir. 214# 215# Another solution, used here, is to always expand $ac_aux_dir to an 216# absolute PATH. The drawback is that using absolute paths prevent a 217# configured tree to be moved without reconfiguration. 218 219AC_DEFUN([AM_AUX_DIR_EXPAND], [ 220# expand $ac_aux_dir to an absolute path 221am_aux_dir=`CDPATH=:; cd $ac_aux_dir && pwd` 222]) 223 224# AM_PROG_INSTALL_SH 225# ------------------ 226# Define $install_sh. 227AC_DEFUN([AM_PROG_INSTALL_SH], 228[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl 229install_sh=${install_sh-"$am_aux_dir/install-sh"} 230AC_SUBST(install_sh)]) 231 232# One issue with vendor `install' (even GNU) is that you can't 233# specify the program used to strip binaries. This is especially 234# annoying in cross-compiling environments, where the build's strip 235# is unlikely to handle the host's binaries. 236# Fortunately install-sh will honor a STRIPPROG variable, so we 237# always use install-sh in `make install-strip', and initialize 238# STRIPPROG with the value of the STRIP variable (set by the user). 239AC_DEFUN([AM_PROG_INSTALL_STRIP], 240[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl 241INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" 242AC_SUBST([INSTALL_STRIP_PROGRAM])]) 243 244# serial 4 -*- Autoconf -*- 245 246 247 248# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be 249# written in clear, in which case automake, when reading aclocal.m4, 250# will think it sees a *use*, and therefore will trigger all it's 251# C support machinery. Also note that it means that autoscan, seeing 252# CC etc. in the Makefile, will ask for an AC_PROG_CC use... 253 254 255 256# _AM_DEPENDENCIES(NAME) 257# --------------------- 258# See how the compiler implements dependency checking. 259# NAME is "CC", "CXX" or "OBJC". 260# We try a few techniques and use that to set a single cache variable. 261# 262# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was 263# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular 264# dependency, and given that the user is not expected to run this macro, 265# just rely on AC_PROG_CC. 266AC_DEFUN([_AM_DEPENDENCIES], 267[AC_REQUIRE([AM_SET_DEPDIR])dnl 268AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl 269AC_REQUIRE([AM_MAKE_INCLUDE])dnl 270AC_REQUIRE([AM_DEP_TRACK])dnl 271 272ifelse([$1], CC, [depcc="$CC" am_compiler_list=], 273 [$1], CXX, [depcc="$CXX" am_compiler_list=], 274 [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'] 275 [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], 276 [depcc="$$1" am_compiler_list=]) 277 278AC_CACHE_CHECK([dependency style of $depcc], 279 [am_cv_$1_dependencies_compiler_type], 280[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then 281 # We make a subdir and do the tests there. Otherwise we can end up 282 # making bogus files that we don't know about and never remove. For 283 # instance it was reported that on HP-UX the gcc test will end up 284 # making a dummy file named `D' -- because `-MD' means `put the output 285 # in D'. 286 mkdir conftest.dir 287 # Copy depcomp to subdir because otherwise we won't find it if we're 288 # using a relative directory. 289 cp "$am_depcomp" conftest.dir 290 cd conftest.dir 291 292 am_cv_$1_dependencies_compiler_type=none 293 if test "$am_compiler_list" = ""; then 294 am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` 295 fi 296 for depmode in $am_compiler_list; do 297 # We need to recreate these files for each test, as the compiler may 298 # overwrite some of them when testing with obscure command lines. 299 # This happens at least with the AIX C compiler. 300 echo '#include "conftest.h"' > conftest.c 301 echo 'int i;' > conftest.h 302 echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf 303 304 case $depmode in 305 nosideeffect) 306 # after this tag, mechanisms are not by side-effect, so they'll 307 # only be used when explicitly requested 308 if test "x$enable_dependency_tracking" = xyes; then 309 continue 310 else 311 break 312 fi 313 ;; 314 none) break ;; 315 esac 316 # We check with `-c' and `-o' for the sake of the "dashmstdout" 317 # mode. It turns out that the SunPro C++ compiler does not properly 318 # handle `-M -o', and we need to detect this. 319 if depmode=$depmode \ 320 source=conftest.c object=conftest.o \ 321 depfile=conftest.Po tmpdepfile=conftest.TPo \ 322 $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && 323 grep conftest.h conftest.Po > /dev/null 2>&1 && 324 ${MAKE-make} -s -f confmf > /dev/null 2>&1; then 325 am_cv_$1_dependencies_compiler_type=$depmode 326 break 327 fi 328 done 329 330 cd .. 331 rm -rf conftest.dir 332else 333 am_cv_$1_dependencies_compiler_type=none 334fi 335]) 336$1DEPMODE="depmode=$am_cv_$1_dependencies_compiler_type" 337AC_SUBST([$1DEPMODE]) 338]) 339 340 341# AM_SET_DEPDIR 342# ------------- 343# Choose a directory name for dependency files. 344# This macro is AC_REQUIREd in _AM_DEPENDENCIES 345AC_DEFUN([AM_SET_DEPDIR], 346[rm -f .deps 2>/dev/null 347mkdir .deps 2>/dev/null 348if test -d .deps; then 349 DEPDIR=.deps 350else 351 # MS-DOS does not allow filenames that begin with a dot. 352 DEPDIR=_deps 353fi 354rmdir .deps 2>/dev/null 355AC_SUBST(DEPDIR) 356]) 357 358 359# AM_DEP_TRACK 360# ------------ 361AC_DEFUN([AM_DEP_TRACK], 362[AC_ARG_ENABLE(dependency-tracking, 363[ --disable-dependency-tracking Speeds up one-time builds 364 --enable-dependency-tracking Do not reject slow dependency extractors]) 365if test "x$enable_dependency_tracking" != xno; then 366 am_depcomp="$ac_aux_dir/depcomp" 367 AMDEPBACKSLASH='\' 368fi 369AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) 370pushdef([subst], defn([AC_SUBST])) 371subst(AMDEPBACKSLASH) 372popdef([subst]) 373]) 374 375# Generate code to set up dependency tracking. 376# This macro should only be invoked once -- use via AC_REQUIRE. 377# Usage: 378# AM_OUTPUT_DEPENDENCY_COMMANDS 379 380# 381# This code is only required when automatic dependency tracking 382# is enabled. FIXME. This creates each `.P' file that we will 383# need in order to bootstrap the dependency handling code. 384AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],[ 385AC_OUTPUT_COMMANDS([ 386test x"$AMDEP_TRUE" != x"" || 387for mf in $CONFIG_FILES; do 388 case "$mf" in 389 Makefile) dirpart=.;; 390 */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;; 391 *) continue;; 392 esac 393 grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue 394 # Extract the definition of DEP_FILES from the Makefile without 395 # running `make'. 396 DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` 397 test -z "$DEPDIR" && continue 398 # When using ansi2knr, U may be empty or an underscore; expand it 399 U=`sed -n -e '/^U = / s///p' < "$mf"` 400 test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" 401 # We invoke sed twice because it is the simplest approach to 402 # changing $(DEPDIR) to its actual value in the expansion. 403 for file in `sed -n -e ' 404 /^DEP_FILES = .*\\\\$/ { 405 s/^DEP_FILES = // 406 :loop 407 s/\\\\$// 408 p 409 n 410 /\\\\$/ b loop 411 p 412 } 413 /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ 414 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do 415 # Make sure the directory exists. 416 test -f "$dirpart/$file" && continue 417 fdir=`echo "$file" | sed -e 's|/[^/]*$||'` 418 $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1 419 # echo "creating $dirpart/$file" 420 echo '# dummy' > "$dirpart/$file" 421 done 422done 423], [AMDEP_TRUE="$AMDEP_TRUE" 424ac_aux_dir="$ac_aux_dir"])]) 425 426# AM_MAKE_INCLUDE() 427# ----------------- 428# Check to see how make treats includes. 429AC_DEFUN([AM_MAKE_INCLUDE], 430[am_make=${MAKE-make} 431cat > confinc << 'END' 432doit: 433 @echo done 434END 435# If we don't find an include directive, just comment out the code. 436AC_MSG_CHECKING([for style of include used by $am_make]) 437am__include='#' 438am__quote= 439_am_result=none 440# First try GNU make style include. 441echo "include confinc" > confmf 442# We grep out `Entering directory' and `Leaving directory' 443# messages which can occur if `w' ends up in MAKEFLAGS. 444# In particular we don't look at `^make:' because GNU make might 445# be invoked under some other name (usually "gmake"), in which 446# case it prints its new name instead of `make'. 447if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then 448 am__include=include 449 am__quote= 450 _am_result=GNU 451fi 452# Now try BSD make style include. 453if test "$am__include" = "#"; then 454 echo '.include "confinc"' > confmf 455 if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then 456 am__include=.include 457 am__quote='"' 458 _am_result=BSD 459 fi 460fi 461AC_SUBST(am__include) 462AC_SUBST(am__quote) 463AC_MSG_RESULT($_am_result) 464rm -f confinc confmf 465]) 466 467# serial 3 468 469# AM_CONDITIONAL(NAME, SHELL-CONDITION) 470# ------------------------------------- 471# Define a conditional. 472# 473# FIXME: Once using 2.50, use this: 474# m4_match([$1], [^TRUE\|FALSE$], [AC_FATAL([$0: invalid condition: $1])])dnl 475AC_DEFUN([AM_CONDITIONAL], 476[ifelse([$1], [TRUE], 477 [errprint(__file__:__line__: [$0: invalid condition: $1 478])dnl 479m4exit(1)])dnl 480ifelse([$1], [FALSE], 481 [errprint(__file__:__line__: [$0: invalid condition: $1 482])dnl 483m4exit(1)])dnl 484AC_SUBST([$1_TRUE]) 485AC_SUBST([$1_FALSE]) 486if $2; then 487 $1_TRUE= 488 $1_FALSE='#' 489else 490 $1_TRUE='#' 491 $1_FALSE= 492fi]) 493 494# Like AC_CONFIG_HEADER, but automatically create stamp file. 495 496# serial 3 497 498# When config.status generates a header, we must update the stamp-h file. 499# This file resides in the same directory as the config header 500# that is generated. We must strip everything past the first ":", 501# and everything past the last "/". 502 503AC_PREREQ([2.12]) 504 505AC_DEFUN([AM_CONFIG_HEADER], 506[ifdef([AC_FOREACH],dnl 507 [dnl init our file count if it isn't already 508 m4_ifndef([_AM_Config_Header_Index], m4_define([_AM_Config_Header_Index], [0])) 509 dnl prepare to store our destination file list for use in config.status 510 AC_FOREACH([_AM_File], [$1], 511 [m4_pushdef([_AM_Dest], m4_patsubst(_AM_File, [:.*])) 512 m4_define([_AM_Config_Header_Index], m4_incr(_AM_Config_Header_Index)) 513 dnl and add it to the list of files AC keeps track of, along 514 dnl with our hook 515 AC_CONFIG_HEADERS(_AM_File, 516dnl COMMANDS, [, INIT-CMDS] 517[# update the timestamp 518echo timestamp >"AS_ESCAPE(_AM_DIRNAME(]_AM_Dest[))/stamp-h]_AM_Config_Header_Index[" 519][$2]m4_ifval([$3], [, [$3]]))dnl AC_CONFIG_HEADERS 520 m4_popdef([_AM_Dest])])],dnl 521[AC_CONFIG_HEADER([$1]) 522 AC_OUTPUT_COMMANDS( 523 ifelse(patsubst([$1], [[^ ]], []), 524 [], 525 [test -z "$CONFIG_HEADERS" || echo timestamp >dnl 526 patsubst([$1], [^\([^:]*/\)?.*], [\1])stamp-h]),dnl 527[am_indx=1 528for am_file in $1; do 529 case " \$CONFIG_HEADERS " in 530 *" \$am_file "*) 531 am_dir=\`echo \$am_file |sed 's%:.*%%;s%[^/]*\$%%'\` 532 if test -n "\$am_dir"; then 533 am_tmpdir=\`echo \$am_dir |sed 's%^\(/*\).*\$%\1%'\` 534 for am_subdir in \`echo \$am_dir |sed 's%/% %'\`; do 535 am_tmpdir=\$am_tmpdir\$am_subdir/ 536 if test ! -d \$am_tmpdir; then 537 mkdir \$am_tmpdir 538 fi 539 done 540 fi 541 echo timestamp > "\$am_dir"stamp-h\$am_indx 542 ;; 543 esac 544 am_indx=\`expr \$am_indx + 1\` 545done]) 546])]) # AM_CONFIG_HEADER 547 548# _AM_DIRNAME(PATH) 549# ----------------- 550# Like AS_DIRNAME, only do it during macro expansion 551AC_DEFUN([_AM_DIRNAME], 552 [m4_if(m4_regexp([$1], [^.*[^/]//*[^/][^/]*/*$]), -1, 553 m4_if(m4_regexp([$1], [^//\([^/]\|$\)]), -1, 554 m4_if(m4_regexp([$1], [^/.*]), -1, 555 [.], 556 m4_patsubst([$1], [^\(/\).*], [\1])), 557 m4_patsubst([$1], [^\(//\)\([^/].*\|$\)], [\1])), 558 m4_patsubst([$1], [^\(.*[^/]\)//*[^/][^/]*/*$], [\1]))[]dnl 559]) # _AM_DIRNAME 560 561# Add --enable-maintainer-mode option to configure. 562# From Jim Meyering 563 564# serial 1 565 566AC_DEFUN([AM_MAINTAINER_MODE], 567[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) 568 dnl maintainer-mode is disabled by default 569 AC_ARG_ENABLE(maintainer-mode, 570[ --enable-maintainer-mode enable make rules and dependencies not useful 571 (and sometimes confusing) to the casual installer], 572 USE_MAINTAINER_MODE=$enableval, 573 USE_MAINTAINER_MODE=no) 574 AC_MSG_RESULT([$USE_MAINTAINER_MODE]) 575 AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) 576 MAINT=$MAINTAINER_MODE_TRUE 577 AC_SUBST(MAINT)dnl 578] 579) 580 581