1# 2# This is the main Apache HTTP server configuration file. It contains the 3# configuration directives that give the server its instructions. 4# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. 5# In particular, see 6# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> 7# for a discussion of each configuration directive. 8# 9# Do NOT simply read the instructions in here without understanding 10# what they do. They're here only as hints or reminders. If you are unsure 11# consult the online docs. You have been warned. 12# 13# Configuration and logfile names: If the filenames you specify for many 14# of the server's control files begin with "/" (or "drive:/" for Win32), the 15# server will use that explicit path. If the filenames do *not* begin 16# with "/", the value of ServerRoot is prepended -- so "logs/access_log" 17# with ServerRoot set to "/usr/local/apache2" will be interpreted by the 18# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 19# will be interpreted as '/logs/access_log'. 20# 21# NOTE: Where filenames are specified, you must use forward slashes 22# instead of backslashes (e.g., "c:/apache" instead of "c:\apache"). 23# If a drive letter is omitted, the drive on which httpd.exe is located 24# will be used by default. It is recommended that you always supply 25# an explicit drive letter in absolute paths to avoid confusion. 26 27# 28# ServerRoot: The top of the directory tree under which the server's 29# configuration, error, and log files are kept. 30# 31# Do not add a slash at the end of the directory path. If you point 32# ServerRoot at a non-local disk, be sure to specify a local disk on the 33# Mutex directive, if file-based mutexes are used. If you wish to share the 34# same ServerRoot for multiple httpd daemons, you will need to change at 35# least PidFile. 36# 37Define SRVROOT "C:/usr/local/apache2/" 38ServerRoot "${SRVROOT}" 39 40# 41# Mutex: Allows you to set the mutex mechanism and mutex file directory 42# for individual mutexes, or change the global defaults 43# 44# Uncomment and change the directory if mutexes are file-based and the default 45# mutex file directory is not on a local disk or is not appropriate for some 46# other reason. 47# 48# Mutex default:logs 49 50# 51# Listen: Allows you to bind Apache to specific IP addresses and/or 52# ports, instead of the default. See also the <VirtualHost> 53# directive. 54# 55# Change this to Listen on specific IP addresses as shown below to 56# prevent Apache from glomming onto all bound IP addresses. 57# 58#Listen 12.34.56.78:80 59Listen 80 60AddHandler application/x-httpd-php .php 61AddType application/x-httpd-php .php .html 62PHPIniDir "c:/tools/php74" 63# 64# Dynamic Shared Object (DSO) Support 65# 66# To be able to use the functionality of a module which was built as a DSO you 67# have to place corresponding `LoadModule' lines at this location so the 68# directives contained in it are actually available _before_ they are used. 69# Statically compiled modules (those listed by `httpd -l') do not need 70# to be loaded here. 71# 72# Example: 73LoadModule php7_module "c:/tools/php74/php7apache2_4.dll" 74# LoadModule foo_module modules/mod_foo.so 75# 76#LoadModule access_compat_module modules/mod_access_compat.so 77LoadModule actions_module modules/mod_actions.so 78LoadModule alias_module modules/mod_alias.so 79LoadModule allowmethods_module modules/mod_allowmethods.so 80LoadModule asis_module modules/mod_asis.so 81LoadModule auth_basic_module modules/mod_auth_basic.so 82#LoadModule auth_digest_module modules/mod_auth_digest.so 83#LoadModule auth_form_module modules/mod_auth_form.so 84#LoadModule authn_anon_module modules/mod_authn_anon.so 85LoadModule authn_core_module modules/mod_authn_core.so 86#LoadModule authn_dbd_module modules/mod_authn_dbd.so 87#LoadModule authn_dbm_module modules/mod_authn_dbm.so 88LoadModule authn_file_module modules/mod_authn_file.so 89#LoadModule authn_socache_module modules/mod_authn_socache.so 90#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so 91#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so 92LoadModule authz_core_module modules/mod_authz_core.so 93#LoadModule authz_dbd_module modules/mod_authz_dbd.so 94#LoadModule authz_dbm_module modules/mod_authz_dbm.so 95LoadModule authz_groupfile_module modules/mod_authz_groupfile.so 96LoadModule authz_host_module modules/mod_authz_host.so 97#LoadModule authz_owner_module modules/mod_authz_owner.so 98LoadModule authz_user_module modules/mod_authz_user.so 99LoadModule autoindex_module modules/mod_autoindex.so 100#LoadModule buffer_module modules/mod_buffer.so 101#LoadModule cache_module modules/mod_cache.so 102#LoadModule cache_disk_module modules/mod_cache_disk.so 103#LoadModule cache_socache_module modules/mod_cache_socache.so 104#LoadModule cern_meta_module modules/mod_cern_meta.so 105LoadModule cgi_module modules/mod_cgi.so 106#LoadModule charset_lite_module modules/mod_charset_lite.so 107#LoadModule data_module modules/mod_data.so 108#LoadModule dav_module modules/mod_dav.so 109#LoadModule dav_fs_module modules/mod_dav_fs.so 110#LoadModule dav_lock_module modules/mod_dav_lock.so 111#LoadModule dbd_module modules/mod_dbd.so 112#LoadModule deflate_module modules/mod_deflate.so 113LoadModule dir_module modules/mod_dir.so 114#LoadModule dumpio_module modules/mod_dumpio.so 115LoadModule env_module modules/mod_env.so 116#LoadModule expires_module modules/mod_expires.so 117#LoadModule ext_filter_module modules/mod_ext_filter.so 118#LoadModule file_cache_module modules/mod_file_cache.so 119#LoadModule filter_module modules/mod_filter.so 120#LoadModule headers_module modules/mod_headers.so 121#LoadModule heartbeat_module modules/mod_heartbeat.so 122#LoadModule heartmonitor_module modules/mod_heartmonitor.so 123#LoadModule http2_module modules/mod_http2.so 124#LoadModule ident_module modules/mod_ident.so 125#LoadModule imagemap_module modules/mod_imagemap.so 126LoadModule include_module modules/mod_include.so 127LoadModule info_module modules/mod_info.so 128LoadModule isapi_module modules/mod_isapi.so 129#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so 130#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so 131#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so 132#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so 133#LoadModule ldap_module modules/mod_ldap.so 134#LoadModule logio_module modules/mod_logio.so 135LoadModule log_config_module modules/mod_log_config.so 136#LoadModule log_debug_module modules/mod_log_debug.so 137#LoadModule log_forensic_module modules/mod_log_forensic.so 138#LoadModule lua_module modules/mod_lua.so 139#LoadModule macro_module modules/mod_macro.so 140#LoadModule md_module modules/mod_md.so 141LoadModule mime_module modules/mod_mime.so 142#LoadModule mime_magic_module modules/mod_mime_magic.so 143LoadModule negotiation_module modules/mod_negotiation.so 144#LoadModule proxy_module modules/mod_proxy.so 145#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so 146#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so 147#LoadModule proxy_connect_module modules/mod_proxy_connect.so 148#LoadModule proxy_express_module modules/mod_proxy_express.so 149#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so 150#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so 151#LoadModule proxy_html_module modules/mod_proxy_html.so 152#LoadModule proxy_http_module modules/mod_proxy_http.so 153#LoadModule proxy_http2_module modules/mod_proxy_http2.so 154#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so 155#LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so 156#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so 157#LoadModule ratelimit_module modules/mod_ratelimit.so 158#LoadModule reflector_module modules/mod_reflector.so 159#LoadModule remoteip_module modules/mod_remoteip.so 160#LoadModule request_module modules/mod_request.so 161#LoadModule reqtimeout_module modules/mod_reqtimeout.so 162#LoadModule rewrite_module modules/mod_rewrite.so 163#LoadModule sed_module modules/mod_sed.so 164#LoadModule session_module modules/mod_session.so 165#LoadModule session_cookie_module modules/mod_session_cookie.so 166#LoadModule session_crypto_module modules/mod_session_crypto.so 167#LoadModule session_dbd_module modules/mod_session_dbd.so 168LoadModule setenvif_module modules/mod_setenvif.so 169#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so 170#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so 171#LoadModule socache_dbm_module modules/mod_socache_dbm.so 172#LoadModule socache_memcache_module modules/mod_socache_memcache.so 173LoadModule socache_shmcb_module modules/mod_socache_shmcb.so 174#LoadModule speling_module modules/mod_speling.so 175LoadModule ssl_module modules/mod_ssl.so 176LoadModule status_module modules/mod_status.so 177#LoadModule substitute_module modules/mod_substitute.so 178#LoadModule unique_id_module modules/mod_unique_id.so 179#LoadModule userdir_module modules/mod_userdir.so 180#LoadModule usertrack_module modules/mod_usertrack.so 181#LoadModule version_module modules/mod_version.so 182#LoadModule vhost_alias_module modules/mod_vhost_alias.so 183#LoadModule watchdog_module modules/mod_watchdog.so 184#LoadModule xml2enc_module modules/mod_xml2enc.so 185 186<IfModule unixd_module> 187# 188# If you wish httpd to run as a different user or group, you must run 189# httpd as root initially and it will switch. 190# 191# User/Group: The name (or #number) of the user/group to run httpd as. 192# It is usually good practice to create a dedicated user and group for 193# running httpd, as with most system services. 194# 195User daemon 196Group daemon 197 198</IfModule> 199 200# 'Main' server configuration 201# 202# The directives in this section set up the values used by the 'main' 203# server, which responds to any requests that aren't handled by a 204# <VirtualHost> definition. These values also provide defaults for 205# any <VirtualHost> containers you may define later in the file. 206# 207# All of these directives may appear inside <VirtualHost> containers, 208# in which case these default settings will be overridden for the 209# virtual host being defined. 210# 211 212# 213# ServerAdmin: Your address, where problems with the server should be 214# e-mailed. This address appears on some server-generated pages, such 215# as error documents. e.g. admin@your-domain.com 216# 217ServerAdmin admin@example.com 218 219# 220# ServerName gives the name and port that the server uses to identify itself. 221# This can often be determined automatically, but we recommend you specify 222# it explicitly to prevent problems during startup. 223# 224# If your host doesn't have a registered DNS name, enter its IP address here. 225# 226ServerName localhost:80 227 228# 229# Deny access to the entirety of your server's filesystem. You must 230# explicitly permit access to web content directories in other 231# <Directory> blocks below. 232# 233<Directory /> 234 AllowOverride none 235 Require all denied 236</Directory> 237 238# 239# Note that from this point forward you must specifically allow 240# particular features to be enabled - so if something's not working as 241# you might expect, make sure that you have specifically enabled it 242# below. 243# 244 245# 246# DocumentRoot: The directory out of which you will serve your 247# documents. By default, all requests are taken from this directory, but 248# symbolic links and aliases may be used to point to other locations. 249# 250DocumentRoot "${SRVROOT}/htdocs" 251<Directory "${SRVROOT}/htdocs"> 252 # 253 # Possible values for the Options directive are "None", "All", 254 # or any combination of: 255 # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews 256 # 257 # Note that "MultiViews" must be named *explicitly* --- "Options All" 258 # doesn't give it to you. 259 # 260 # The Options directive is both complicated and important. Please see 261 # http://httpd.apache.org/docs/2.4/mod/core.html#options 262 # for more information. 263 # 264 Options Indexes FollowSymLinks 265 266 # 267 # AllowOverride controls what directives may be placed in .htaccess files. 268 # It can be "All", "None", or any combination of the keywords: 269 # Options FileInfo AuthConfig Limit 270 # 271 AllowOverride None 272 273 # 274 # Controls who can get stuff from this server. 275 # 276 Require all granted 277</Directory> 278 279# 280# DirectoryIndex: sets the file that Apache will serve if a directory 281# is requested. 282# 283<IfModule dir_module> 284 DirectoryIndex index.html 285</IfModule> 286 287# 288# The following lines prevent .htaccess and .htpasswd files from being 289# viewed by Web clients. 290# 291<Files ".ht*"> 292 Require all denied 293</Files> 294 295# 296# ErrorLog: The location of the error log file. 297# If you do not specify an ErrorLog directive within a <VirtualHost> 298# container, error messages relating to that virtual host will be 299# logged here. If you *do* define an error logfile for a <VirtualHost> 300# container, that host's errors will be logged there and not here. 301# 302ErrorLog "logs/error.log" 303 304# 305# LogLevel: Control the number of messages logged to the error_log. 306# Possible values include: debug, info, notice, warn, error, crit, 307# alert, emerg. 308# 309LogLevel warn 310 311<IfModule log_config_module> 312 # 313 # The following directives define some format nicknames for use with 314 # a CustomLog directive (see below). 315 # 316 LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined 317 LogFormat "%h %l %u %t \"%r\" %>s %b" common 318 319 <IfModule logio_module> 320 # You need to enable mod_logio.c to use %I and %O 321 LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio 322 </IfModule> 323 324 # 325 # The location and format of the access logfile (Common Logfile Format). 326 # If you do not define any access logfiles within a <VirtualHost> 327 # container, they will be logged here. Contrariwise, if you *do* 328 # define per-<VirtualHost> access logfiles, transactions will be 329 # logged therein and *not* in this file. 330 # 331 CustomLog "logs/access.log" common 332 333 # 334 # If you prefer a logfile with access, agent, and referer information 335 # (Combined Logfile Format) you can use the following directive. 336 # 337 #CustomLog "logs/access.log" combined 338</IfModule> 339 340<IfModule alias_module> 341 # 342 # Redirect: Allows you to tell clients about documents that used to 343 # exist in your server's namespace, but do not anymore. The client 344 # will make a new request for the document at its new location. 345 # Example: 346 # Redirect permanent /foo http://www.example.com/bar 347 348 # 349 # Alias: Maps web paths into filesystem paths and is used to 350 # access content that does not live under the DocumentRoot. 351 # Example: 352 # Alias /webpath /full/filesystem/path 353 # 354 # If you include a trailing / on /webpath then the server will 355 # require it to be present in the URL. You will also likely 356 # need to provide a <Directory> section to allow access to 357 # the filesystem path. 358 359 # 360 # ScriptAlias: This controls which directories contain server scripts. 361 # ScriptAliases are essentially the same as Aliases, except that 362 # documents in the target directory are treated as applications and 363 # run by the server when requested rather than as documents sent to the 364 # client. The same rules about trailing "/" apply to ScriptAlias 365 # directives as to Alias. 366 # 367 ScriptAlias /cgi-bin/ "${SRVROOT}/cgi-bin/" 368 369</IfModule> 370 371<IfModule cgid_module> 372 # 373 # ScriptSock: On threaded servers, designate the path to the UNIX 374 # socket used to communicate with the CGI daemon of mod_cgid. 375 # 376 #Scriptsock logs/cgisock 377</IfModule> 378 379# 380# "${SRVROOT}/cgi-bin" should be changed to whatever your ScriptAliased 381# CGI directory exists, if you have that configured. 382# 383<Directory "${SRVROOT}/cgi-bin"> 384 AllowOverride None 385 Options None 386 Require all granted 387</Directory> 388 389<IfModule mime_module> 390 # 391 # TypesConfig points to the file containing the list of mappings from 392 # filename extension to MIME-type. 393 # 394 TypesConfig conf/mime.types 395 396 # 397 # AddType allows you to add to or override the MIME configuration 398 # file specified in TypesConfig for specific file types. 399 # 400 #AddType application/x-gzip .tgz 401 # 402 # AddEncoding allows you to have certain browsers uncompress 403 # information on the fly. Note: Not all browsers support this. 404 # 405 #AddEncoding x-compress .Z 406 #AddEncoding x-gzip .gz .tgz 407 # 408 # If the AddEncoding directives above are commented-out, then you 409 # probably should define those extensions to indicate media types: 410 # 411 AddType application/x-compress .Z 412 AddType application/x-gzip .gz .tgz 413 414 # 415 # AddHandler allows you to map certain file extensions to "handlers": 416 # actions unrelated to filetype. These can be either built into the server 417 # or added with the Action directive (see below) 418 # 419 # To use CGI scripts outside of ScriptAliased directories: 420 # (You will also need to add "ExecCGI" to the "Options" directive.) 421 # 422 #AddHandler cgi-script .cgi .pl 423 424 # For type maps (negotiated resources): 425 #AddHandler type-map var 426 427 # 428 # Filters allow you to process content before it is sent to the client. 429 # 430 # To parse .shtml files for server-side includes (SSI): 431 # (You will also need to add "Includes" to the "Options" directive.) 432 # 433 #AddType text/html .shtml 434 #AddOutputFilter INCLUDES .shtml 435</IfModule> 436 437# 438# The mod_mime_magic module allows the server to use various hints from the 439# contents of the file itself to determine its type. The MIMEMagicFile 440# directive tells the module where the hint definitions are located. 441# 442#MIMEMagicFile conf/magic 443 444# 445# Customizable error responses come in three flavors: 446# 1) plain text 2) local redirects 3) external redirects 447# 448# Some examples: 449#ErrorDocument 500 "The server made a boo boo." 450#ErrorDocument 404 /missing.html 451#ErrorDocument 404 "/cgi-bin/missing_handler.pl" 452#ErrorDocument 402 http://www.example.com/subscription_info.html 453# 454 455# 456# MaxRanges: Maximum number of Ranges in a request before 457# returning the entire resource, or one of the special 458# values 'default', 'none' or 'unlimited'. 459# Default setting is to accept 200 Ranges. 460#MaxRanges unlimited 461 462# 463# EnableMMAP and EnableSendfile: On systems that support it, 464# memory-mapping or the sendfile syscall may be used to deliver 465# files. This usually improves server performance, but must 466# be turned off when serving from networked-mounted 467# filesystems or if support for these functions is otherwise 468# broken on your system. 469# Defaults: EnableMMAP On, EnableSendfile Off 470# 471#EnableMMAP off 472#EnableSendfile on 473 474#AcceptFilter http none 475#AcceptFilter https none 476 477# Supplemental configuration 478# 479# The configuration files in the conf/extra/ directory can be 480# included to add extra features or to modify the default configuration of 481# the server, or you may simply copy their contents here and change as 482# necessary. 483 484# Server-pool management (MPM specific) 485#Include conf/extra/httpd-mpm.conf 486 487# Multi-language error messages 488#Include conf/extra/httpd-multilang-errordoc.conf 489 490# Fancy directory listings 491Include conf/extra/httpd-autoindex.conf 492 493# Language settings 494#Include conf/extra/httpd-languages.conf 495 496# User home directories 497#Include conf/extra/httpd-userdir.conf 498 499# Real-time info on requests and configuration 500Include conf/extra/httpd-info.conf 501 502# Virtual hosts 503# Include conf/extra/httpd-vhosts.conf 504 505# Local access to the Apache HTTP Server Manual 506#Include conf/extra/httpd-manual.conf 507 508# Distributed authoring and versioning (WebDAV) 509#Include conf/extra/httpd-dav.conf 510 511# Various default settings 512#Include conf/extra/httpd-default.conf 513 514# Configure mod_proxy_html to understand HTML4/XHTML1 515<IfModule proxy_html_module> 516Include conf/extra/httpd-proxy-html.conf 517</IfModule> 518 519# Secure (SSL/TLS) connections 520# Note: The following must must be present to support 521# starting without SSL on platforms with no /dev/random equivalent 522# but a statically compiled-in mod_ssl. 523# 524<IfModule ssl_module> 525#Include conf/extra/httpd-ssl.conf 526#Include conf/extra/httpd-ahssl.conf 527SSLRandomSeed startup builtin 528SSLRandomSeed connect builtin 529</IfModule> 530<IfModule http2_module> 531 ProtocolsHonorOrder On 532 Protocols h2 h2c http/1.1 533</IfModule> 534