1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright (C) 2010 Freescale Semiconductor, Inc.
4 * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
5 */
6
7 #include <common.h>
8 #include <i2c.h>
9 #include <init.h>
10 #include <net.h>
11 #include <linux/delay.h>
12 #include <linux/libfdt.h>
13 #include <fdt_support.h>
14 #include <pci.h>
15 #include <mpc83xx.h>
16 #include <netdev.h>
17 #include <asm/io.h>
18 #include <asm/fsl_serdes.h>
19 #include <asm/fsl_mpc83xx_serdes.h>
20
checkboard(void)21 int checkboard(void)
22 {
23 printf("Board: MPC8308 P1M\n");
24
25 return 0;
26 }
27
28 static struct pci_region pcie_regions_0[] = {
29 {
30 .bus_start = CONFIG_SYS_PCIE1_MEM_BASE,
31 .phys_start = CONFIG_SYS_PCIE1_MEM_PHYS,
32 .size = CONFIG_SYS_PCIE1_MEM_SIZE,
33 .flags = PCI_REGION_MEM,
34 },
35 {
36 .bus_start = CONFIG_SYS_PCIE1_IO_BASE,
37 .phys_start = CONFIG_SYS_PCIE1_IO_PHYS,
38 .size = CONFIG_SYS_PCIE1_IO_SIZE,
39 .flags = PCI_REGION_IO,
40 },
41 };
42
pci_init_board(void)43 void pci_init_board(void)
44 {
45 immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
46 sysconf83xx_t *sysconf = &immr->sysconf;
47 law83xx_t *pcie_law = sysconf->pcielaw;
48 struct pci_region *pcie_reg[] = { pcie_regions_0 };
49
50 fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX,
51 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
52
53 /* Deassert the resets in the control register */
54 out_be32(&sysconf->pecr1, 0xE0008000);
55 udelay(2000);
56
57 /* Configure PCI Express Local Access Windows */
58 out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
59 out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
60
61 mpc83xx_pcie_init(1, pcie_reg);
62 }
63
64 #if defined(CONFIG_OF_BOARD_SETUP)
ft_board_setup(void * blob,struct bd_info * bd)65 int ft_board_setup(void *blob, struct bd_info *bd)
66 {
67 ft_cpu_setup(blob, bd);
68 fsl_fdt_fixup_dr_usb(blob, bd);
69
70 return 0;
71 }
72 #endif
73
board_eth_init(struct bd_info * bis)74 int board_eth_init(struct bd_info *bis)
75 {
76 int rv, num_if = 0;
77
78 /* Initialize TSECs first */
79 rv = cpu_eth_init(bis);
80 if (rv >= 0)
81 num_if += rv;
82 else
83 printf("ERROR: failed to initialize TSECs.\n");
84
85 rv = pci_eth_init(bis);
86 if (rv >= 0)
87 num_if += rv;
88 else
89 printf("ERROR: failed to initialize PCI Ethernet.\n");
90
91 return num_if;
92 }
93