1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Configuation settings for the SAMA5D3xEK board. 4 * 5 * Copyright (C) 2012 - 2013 Atmel 6 * 7 * based on at91sam9m10g45ek.h by: 8 * Stelian Pop <stelian@popies.net> 9 * Lead Tech Design <www.leadtechdesign.com> 10 */ 11 12 #ifndef __CONFIG_H 13 #define __CONFIG_H 14 15 #include "at91-sama5_common.h" 16 17 /* 18 * This needs to be defined for the OHCI code to work but it is defined as 19 * ATMEL_ID_UHPHS in the CPU specific header files. 20 */ 21 #define ATMEL_ID_UHP 32 22 23 /* 24 * Specify the clock enable bit in the PMC_SCER register. 25 */ 26 #define ATMEL_PMC_UHP (1 << 6) 27 28 /* board specific (not enough SRAM) */ 29 #define CONFIG_SAMA5D3_LCD_BASE 0x23E00000 30 31 /* NOR flash */ 32 #ifdef CONFIG_MTD_NOR_FLASH 33 #define CONFIG_SYS_FLASH_BASE 0x10000000 34 #define CONFIG_SYS_MAX_FLASH_SECT 131 35 #define CONFIG_SYS_MAX_FLASH_BANKS 1 36 #endif 37 38 /* SDRAM */ 39 #define CONFIG_SYS_SDRAM_BASE 0x20000000 40 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 41 42 #ifdef CONFIG_SPL_BUILD 43 #define CONFIG_SYS_INIT_SP_ADDR 0x318000 44 #else 45 #define CONFIG_SYS_INIT_SP_ADDR \ 46 (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) 47 #endif 48 49 /* SerialFlash */ 50 51 /* NAND flash */ 52 #ifdef CONFIG_CMD_NAND 53 #define CONFIG_SYS_MAX_NAND_DEVICE 1 54 #define CONFIG_SYS_NAND_BASE 0x60000000 55 /* our ALE is AD21 */ 56 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 57 /* our CLE is AD22 */ 58 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 59 #define CONFIG_SYS_NAND_ONFI_DETECTION 60 #endif 61 62 /* USB */ 63 #ifdef CONFIG_CMD_USB 64 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL 65 #define CONFIG_USB_OHCI_NEW 66 #define CONFIG_SYS_USB_OHCI_CPU_INIT 67 #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI 68 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "sama5d3" 69 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 70 #endif 71 72 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 73 74 /* SPL */ 75 #define CONFIG_SPL_MAX_SIZE 0x18000 76 #define CONFIG_SPL_BSS_START_ADDR 0x20000000 77 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 78 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 79 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 80 81 #define CONFIG_SYS_MONITOR_LEN (512 << 10) 82 83 #ifdef CONFIG_SD_BOOT 84 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 85 #endif 86 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 87 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 88 #define CONFIG_SYS_NAND_PAGE_SIZE 0x800 89 #define CONFIG_SYS_NAND_PAGE_COUNT 64 90 #define CONFIG_SYS_NAND_OOBSIZE 64 91 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 92 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 93 94 #endif 95