1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2016 Freescale Semiconductor, Inc. 4 */ 5 6 #ifndef __LS1012ARDB_H__ 7 #define __LS1012ARDB_H__ 8 9 #include "ls1012a_common.h" 10 11 /* DDR */ 12 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 13 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 14 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 15 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 16 17 #ifndef CONFIG_SPL_BUILD 18 #undef BOOT_TARGET_DEVICES 19 #define BOOT_TARGET_DEVICES(func) \ 20 func(USB, usb, 0) 21 #endif 22 23 #undef CONFIG_EXTRA_ENV_SETTINGS 24 #define CONFIG_EXTRA_ENV_SETTINGS \ 25 "verify=no\0" \ 26 "fdt_high=0xffffffffffffffff\0" \ 27 "fdt_addr=0x00f00000\0" \ 28 "kernel_addr=0x01000000\0" \ 29 "scriptaddr=0x80000000\0" \ 30 "fdtheader_addr_r=0x80100000\0" \ 31 "kernelheader_addr_r=0x80200000\0" \ 32 "kernel_addr_r=0x96000000\0" \ 33 "fdt_addr_r=0x90000000\0" \ 34 "load_addr=0x96000000\0" \ 35 "kernel_size=0x2800000\0" \ 36 "bootm_size=0x10000000\0" \ 37 "console=ttyS0,115200\0" \ 38 BOOTENV \ 39 "boot_scripts=ls1012afrdm_boot.scr\0" \ 40 "scan_dev_for_boot_part=" \ 41 "part list ${devtype} ${devnum} devplist; " \ 42 "env exists devplist || setenv devplist 1; " \ 43 "for distro_bootpart in ${devplist}; do " \ 44 "if fstype ${devtype} " \ 45 "${devnum}:${distro_bootpart} " \ 46 "bootfstype; then " \ 47 "run scan_dev_for_boot; " \ 48 "fi; " \ 49 "done\0" \ 50 "installer=load usb 0:2 $load_addr " \ 51 "/flex_installer_arm64.itb; " \ 52 "bootm $load_addr#$board\0" \ 53 "qspi_bootcmd=echo Trying load from qspi..;" \ 54 "sf probe && sf read $load_addr " \ 55 "$kernel_addr $kernel_size && bootm $load_addr#$board\0" 56 57 #undef CONFIG_BOOTCOMMAND 58 #ifdef CONFIG_TFABOOT 59 #undef QSPI_NOR_BOOTCOMMAND 60 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" 61 #else 62 #define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" 63 #endif 64 65 #endif /* __LS1012ARDB_H__ */ 66