1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Board configuration file for Variscite DART-6UL Evaluation Kit 4 * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com> 5 */ 6 #ifndef __DART_6UL_H 7 #define __DART_6UL_H 8 9 #include <linux/sizes.h> 10 #include <linux/stringify.h> 11 #include "mx6_common.h" 12 13 /* SPL options */ 14 #include "imx6_spl.h" 15 16 /* NAND pin conflicts with usdhc2 */ 17 #ifdef CONFIG_CMD_NAND 18 #define CONFIG_SYS_FSL_USDHC_NUM 1 19 #else 20 #define CONFIG_SYS_FSL_USDHC_NUM 2 21 #endif 22 23 #ifdef CONFIG_CMD_NET 24 #define CONFIG_FEC_ENET_DEV 0 25 #if (CONFIG_FEC_ENET_DEV == 0) 26 #define CONFIG_ETHPRIME "eth0" 27 #elif (CONFIG_FEC_ENET_DEV == 1) 28 #define CONFIG_ETHPRIME "eth1" 29 #endif 30 #endif 31 32 /* Size of malloc() pool */ 33 #define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M) 34 35 /* Environment settings */ 36 37 /* Environment in SD */ 38 #define MMC_ROOTFS_DEV 0 39 #define MMC_ROOTFS_PART 2 40 41 /* Console configs */ 42 #define CONFIG_MXC_UART_BASE UART1_BASE 43 44 /* MMC Configs */ 45 46 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR 47 #define CONFIG_SUPPORT_EMMC_BOOT 48 49 /* I2C configs */ 50 #ifdef CONFIG_CMD_I2C 51 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 52 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 53 #define CONFIG_SYS_I2C_SPEED 100000 54 #endif 55 56 /* Miscellaneous configurable options */ 57 58 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 59 #define CONFIG_SYS_HZ 1000 60 61 /* Physical Memory Map */ 62 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 63 #define PHYS_SDRAM_SIZE SZ_512M 64 65 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 66 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 67 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 68 69 #define CONFIG_SYS_INIT_SP_OFFSET \ 70 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 71 #define CONFIG_SYS_INIT_SP_ADDR \ 72 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 73 74 /* USB Configs */ 75 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 76 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 77 #define CONFIG_MXC_USB_FLAGS 0 78 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 79 80 #define ENV_MMC \ 81 "mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \ 82 "mmcpart=" __stringify(MMC_ROOTFS_PART) "\0" \ 83 "fitpart=1\0" \ 84 "bootdelay=3\0" \ 85 "silent=1\0" \ 86 "optargs=rw rootwait\0" \ 87 "mmcautodetect=yes\0" \ 88 "mmcrootfstype=ext4\0" \ 89 "mmcfit_name=fitImage\0" \ 90 "mmcloadfit=fatload mmc ${mmcdev}:${fitpart} ${fit_addr} " \ 91 "${mmcfit_name}\0" \ 92 "mmcargs=setenv bootargs " \ 93 "root=/dev/mmcblk${mmcdev}p${mmcpart} ${optargs} " \ 94 "console=${console} rootfstype=${mmcrootfstype}\0" \ 95 "mmc_mmc_fit=run mmcloadfit;run mmcargs addcon; bootm ${fit_addr}\0" \ 96 97 /* Default environment */ 98 #define CONFIG_EXTRA_ENV_SETTINGS \ 99 "fdt_high=0xffffffff\0" \ 100 "console=ttymxc0,115200n8\0" \ 101 "addcon=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \ 102 "fit_addr=0x82000000\0" \ 103 ENV_MMC 104 105 #define CONFIG_BOOTCOMMAND "run mmc_mmc_fit" 106 107 #define BOOT_TARGET_DEVICES(func) \ 108 func(MMC, mmc, 0) \ 109 func(MMC, mmc, 1) \ 110 func(DHCP, dhcp, na) 111 112 #include <config_distro_bootcmd.h> 113 #endif /* __DART_6UL_H */ 114