1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2/*
3 * Copyright 2020 Compass Electronics Group, LLC
4 */
5
6/ {
7	leds {
8		compatible = "gpio-leds";
9
10		led0 {
11			label = "gen_led0";
12			gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
13			default-state = "off";
14		};
15
16		led1 {
17			label = "gen_led1";
18			gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
19			default-state = "off";
20		};
21
22		led2 {
23			label = "gen_led2";
24			gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
25			default-state = "off";
26		};
27
28		led3 {
29			pinctrl-names = "default";
30			pinctrl-0 = <&pinctrl_led3>;
31			label = "heartbeat";
32			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
33			linux,default-trigger = "heartbeat";
34		};
35	};
36
37	reg_audio: regulator-audio {
38		compatible = "regulator-fixed";
39		regulator-name = "3v3_aud";
40		regulator-min-microvolt = <3300000>;
41		regulator-max-microvolt = <3300000>;
42		gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
43		enable-active-high;
44	};
45
46	reg_usdhc2_vmmc: regulator-usdhc2 {
47		compatible = "regulator-fixed";
48		regulator-name = "VSD_3V3";
49		regulator-min-microvolt = <3300000>;
50		regulator-max-microvolt = <3300000>;
51		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
52		enable-active-high;
53	};
54
55	sound {
56		compatible = "fsl,imx-audio-wm8962";
57		model = "wm8962-audio";
58		audio-cpu = <&sai3>;
59		audio-codec = <&wm8962>;
60		audio-routing =
61			"Headphone Jack", "HPOUTL",
62			"Headphone Jack", "HPOUTR",
63			"Ext Spk", "SPKOUTL",
64			"Ext Spk", "SPKOUTR",
65			"AMIC", "MICBIAS",
66			"IN3R", "AMIC";
67	};
68};
69
70&ecspi2 {
71	pinctrl-names = "default";
72	pinctrl-0 = <&pinctrl_espi2>;
73	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
74	status = "okay";
75
76	eeprom@0 {
77		compatible = "microchip,at25160bn", "atmel,at25";
78		reg = <0>;
79		spi-max-frequency = <5000000>;
80		spi-cpha;
81		spi-cpol;
82		pagesize = <32>;
83		size = <2048>;
84		address-width = <16>;
85	};
86};
87
88&i2c2 {
89	clock-frequency = <400000>;
90	pinctrl-names = "default";
91	pinctrl-0 = <&pinctrl_i2c2>;
92	status = "okay";
93};
94
95&i2c4 {
96	clock-frequency = <400000>;
97	pinctrl-names = "default";
98	pinctrl-0 = <&pinctrl_i2c4>;
99	status = "okay";
100
101	wm8962: audio-codec@1a {
102		compatible = "wlf,wm8962";
103		reg = <0x1a>;
104		clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
105		clock-names = "xclk";
106		DCVDD-supply = <&reg_audio>;
107		DBVDD-supply = <&reg_audio>;
108		AVDD-supply = <&reg_audio>;
109		CPVDD-supply = <&reg_audio>;
110		MICVDD-supply = <&reg_audio>;
111		PLLVDD-supply = <&reg_audio>;
112		SPKVDD1-supply = <&reg_audio>;
113		SPKVDD2-supply = <&reg_audio>;
114		gpio-cfg = <
115			0x0000 /* 0:Default */
116			0x0000 /* 1:Default */
117			0x0000 /* 2:FN_DMICCLK */
118			0x0000 /* 3:Default */
119			0x0000 /* 4:FN_DMICCDAT */
120			0x0000 /* 5:Default */
121		>;
122	};
123
124	pca6416_0: gpio@20 {
125		compatible = "nxp,pcal6416";
126		reg = <0x20>;
127		pinctrl-names = "default";
128		pinctrl-0 = <&pinctrl_pcal6414>;
129		gpio-controller;
130		#gpio-cells = <2>;
131		interrupt-parent = <&gpio4>;
132		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
133	};
134
135	pca6416_1: gpio@21 {
136		compatible = "nxp,pcal6416";
137		reg = <0x21>;
138		gpio-controller;
139		#gpio-cells = <2>;
140		interrupt-parent = <&gpio4>;
141		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
142	};
143};
144
145&sai3 {
146	pinctrl-names = "default";
147	pinctrl-0 = <&pinctrl_sai3>;
148	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
149	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
150	assigned-clock-rates = <24576000>;
151	fsl,sai-mclk-direction-output;
152	status = "okay";
153};
154
155&snvs_pwrkey {
156	status = "okay";
157};
158
159&uart2 { /* console */
160	pinctrl-names = "default";
161	pinctrl-0 = <&pinctrl_uart2>;
162	status = "okay";
163};
164
165&uart3 {
166	pinctrl-names = "default";
167	pinctrl-0 = <&pinctrl_uart3>;
168	assigned-clocks = <&clk IMX8MM_CLK_UART3>;
169	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
170	status = "okay";
171};
172
173&usdhc2 {
174	pinctrl-names = "default", "state_100mhz", "state_200mhz";
175	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
176	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
177	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
178	bus-width = <4>;
179	vmmc-supply = <&reg_usdhc2_vmmc>;
180	status = "okay";
181};
182
183&iomuxc {
184	pinctrl_espi2: espi2grp {
185		fsl,pins = <
186			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
187			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
188			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
189			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x41
190		>;
191	};
192
193	pinctrl_i2c2: i2c2grp {
194		fsl,pins = <
195			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
196			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
197		>;
198	};
199
200	pinctrl_i2c4: i2c4grp {
201		fsl,pins = <
202			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
203			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
204		>;
205	};
206
207	pinctrl_led3: led3grp {
208		fsl,pins = <
209			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x41
210		>;
211	};
212
213	pinctrl_pcal6414: pcal6414-gpiogrp {
214		fsl,pins = <
215			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19
216		>;
217	};
218
219	pinctrl_sai3: sai3grp {
220		fsl,pins = <
221			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
222			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
223			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
224			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
225			MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
226		>;
227	};
228
229	pinctrl_uart2: uart2grp {
230		fsl,pins = <
231			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
232			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
233		>;
234	};
235
236	pinctrl_uart3: uart3grp {
237		fsl,pins = <
238			MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX	0x40
239			MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX	0x40
240		>;
241	};
242
243	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
244		fsl,pins = <
245			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B	0x41
246			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
247		>;
248	};
249
250	pinctrl_usdhc2: usdhc2grp {
251		fsl,pins = <
252			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x190
253			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d0
254			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
255			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
256			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
257			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
258			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
259		>;
260	};
261
262	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
263		fsl,pins = <
264			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x194
265			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d4
266			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
267			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
268			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
269			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
270			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
271		>;
272	};
273
274	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
275		fsl,pins = <
276			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x196
277			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d6
278			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
279			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
280			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
281			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
282			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
283		>;
284	};
285};
286