1# Copyright (C) 2014-2016 Free Software Foundation, Inc. 2# 3# Copying and distribution of this file, with or without modification, 4# are permitted in any medium without royalty provided the copyright 5# notice and this notice are preserved. 6# 7# Unusual variables checked by this code: 8# NOP - four byte opcode for no-op (defaults to none) 9# NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not 10# empty. 11# SMALL_DATA_CTOR - .ctors contains small data. 12# SMALL_DATA_DTOR - .dtors contains small data. 13# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start 14# INITIAL_READONLY_SECTIONS - at start of text segment 15# OTHER_READONLY_SECTIONS - other than .text .init .rodata ... 16# (e.g., .PARISC.milli) 17# OTHER_TEXT_SECTIONS - these get put in .text when relocating 18# INITIAL_READWRITE_SECTIONS - at start of data segment (after relro) 19# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ... 20# (e.g., .PARISC.global) 21# OTHER_RELRO_SECTIONS - other than .data.rel.ro ... 22# (e.g. PPC32 .fixup, .got[12]) 23# OTHER_RELRO_SECTIONS_2 - as above, but after .dynamic in text segment 24# OTHER_BSS_SECTIONS - other than .bss .sbss ... 25# ATTRS_SECTIONS - at the end 26# OTHER_SECTIONS - at the end 27# EXECUTABLE_SYMBOLS - symbols that must be defined for an 28# executable (e.g., _DYNAMIC_LINK) 29# TEXT_START_ADDR - the first byte of the text segment, after any 30# headers. 31# TEXT_BASE_ADDRESS - the first byte of the text segment. 32# TEXT_START_SYMBOLS - symbols that appear at the start of the 33# .text section. 34# DATA_START_SYMBOLS - symbols that appear at the start of the 35# .data section. 36# DATA_END_SYMBOLS - symbols that appear at the end of the 37# writeable data sections. 38# OTHER_GOT_SYMBOLS - symbols defined just before .got. 39# OTHER_GOT_SECTIONS - sections just after .got. 40# OTHER_SDATA_SECTIONS - sections just after .sdata. 41# OTHER_BSS_SYMBOLS - symbols that appear at the start of the 42# .bss section besides __bss_start. 43# PLT_NEXT_DATA - .plt next to data segment when .plt is in text segment. 44# DATA_PLT - .plt should be in data segment, not text segment. 45# PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement. 46# BSS_PLT - .plt should be in bss segment 47# NO_REL_RELOCS - Don't include .rel.* sections in script 48# NO_RELA_RELOCS - Don't include .rela.* sections in script 49# NON_ALLOC_DYN - Place dynamic sections after data segment. 50# TEXT_DYNAMIC - .dynamic in text segment, not data segment. 51# EMBEDDED - whether this is for an embedded system. 52# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set 53# start address of shared library. 54# INPUT_FILES - INPUT command of files to always include 55# WRITABLE_RODATA - if set, the .rodata section should be writable 56# INIT_START, INIT_END - statements just before and just after 57# combination of .init sections. 58# FINI_START, FINI_END - statements just before and just after 59# combination of .fini sections. 60# STACK_ADDR - start of a .stack section. 61# OTHER_SYMBOLS - symbols to place right at the end of the script. 62# ETEXT_NAME - name of a symbol for the end of the text section, 63# normally etext. 64# SEPARATE_CODE - if set, .text and similar sections containing 65# actual machine instructions must be in wholly disjoint 66# pages from any other data, including headers 67# SEPARATE_GOTPLT - if set, .got.plt should be separate output section, 68# so that .got can be in the RELRO area. It should be set to 69# the number of bytes in the beginning of .got.plt which can be 70# in the RELRO area as well. 71# USER_LABEL_PREFIX - prefix to add to user-visible symbols. 72# RODATA_NAME, SDATA_NAME, SBSS_NAME, BSS_NAME - base parts of names 73# for standard sections, without initial "." or suffixes. 74# 75# When adding sections, do note that the names of some sections are used 76# when specifying the start address of the next. 77# 78 79# Many sections come in three flavours. There is the 'real' section, 80# like ".data". Then there are the per-procedure or per-variable 81# sections, generated by -ffunction-sections and -fdata-sections in GCC, 82# and useful for --gc-sections, which for a variable "foo" might be 83# ".data.foo". Then there are the linkonce sections, for which the linker 84# eliminates duplicates, which are named like ".gnu.linkonce.d.foo". 85# The exact correspondences are: 86# 87# Section Linkonce section 88# .text .gnu.linkonce.t.foo 89# .rodata .gnu.linkonce.r.foo 90# .data .gnu.linkonce.d.foo 91# .bss .gnu.linkonce.b.foo 92# .sdata .gnu.linkonce.s.foo 93# .sbss .gnu.linkonce.sb.foo 94# .sdata2 .gnu.linkonce.s2.foo 95# .sbss2 .gnu.linkonce.sb2.foo 96# .debug_info .gnu.linkonce.wi.foo 97# .tdata .gnu.linkonce.td.foo 98# .tbss .gnu.linkonce.tb.foo 99# .lrodata .gnu.linkonce.lr.foo 100# .ldata .gnu.linkonce.l.foo 101# .lbss .gnu.linkonce.lb.foo 102# 103# Each of these can also have corresponding .rel.* and .rela.* sections. 104 105if test -n "$NOP"; then 106 FILL="=$NOP" 107else 108 FILL= 109fi 110 111test -z "$RODATA_NAME" && RODATA_NAME=rodata 112test -z "$SDATA_NAME" && SDATA_NAME=sdata 113test -z "$SBSS_NAME" && SBSS_NAME=sbss 114test -z "$BSS_NAME" && BSS_NAME=bss 115test -z "$ENTRY" && ENTRY=${USER_LABEL_PREFIX}_start 116test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT} 117test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT} 118if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi 119test -z "${ELFSIZE}" && ELFSIZE=32 120test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8" 121test "$LD_FLAG" = "N" && DATA_ADDR=. 122test -z "${ETEXT_NAME}" && ETEXT_NAME=${USER_LABEL_PREFIX}etext 123test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE="" 124test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE="" 125test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT 126test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }" 127DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))" 128DATA_SEGMENT_RELRO_END="" 129DATA_SEGMENT_END="" 130if test -n "${COMMONPAGESIZE}"; then 131 if test "${SEGMENT_SIZE}" != "${MAXPAGESIZE}"; then 132 DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})" 133 else 134 DATA_SEGMENT_ALIGN="DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})" 135 fi 136 DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);" 137 DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);" 138fi 139if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then 140 INITIAL_READONLY_SECTIONS=".interp ${RELOCATING-0} : { *(.interp) }" 141fi 142if test -z "$PLT"; then 143 IPLT=".iplt ${RELOCATING-0} : { *(.iplt) }" 144 PLT=".plt ${RELOCATING-0} : { *(.plt)${IREL_IN_PLT+ *(.iplt)} } 145 ${IREL_IN_PLT-$IPLT}" 146fi 147test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT= 148if test -z "$GOT"; then 149 if test -z "$SEPARATE_GOTPLT"; then 150 GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }" 151 else 152 GOT=".got ${RELOCATING-0} : { *(.got) *(.igot) }" 153 GOTPLT=".got.plt ${RELOCATING-0} : { *(.got.plt) *(.igot.plt) }" 154 fi 155fi 156REL_IFUNC=".rel.ifunc ${RELOCATING-0} : { *(.rel.ifunc) }" 157RELA_IFUNC=".rela.ifunc ${RELOCATING-0} : { *(.rela.ifunc) }" 158REL_IPLT=".rel.iplt ${RELOCATING-0} : 159 { 160 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rel_iplt_start = .);}} 161 *(.rel.iplt) 162 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rel_iplt_end = .);}} 163 }" 164RELA_IPLT=".rela.iplt ${RELOCATING-0} : 165 { 166 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rela_iplt_start = .);}} 167 *(.rela.iplt) 168 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rela_iplt_end = .);}} 169 }" 170DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }" 171RODATA=".${RODATA_NAME} ${RELOCATING-0} : { *(.${RODATA_NAME}${RELOCATING+ .${RODATA_NAME}.* .gnu.linkonce.r.*}) }" 172DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }" 173DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }" 174if test -z "${NO_SMALL_DATA}"; then 175 SBSS=".${SBSS_NAME} ${RELOCATING-0} : 176 { 177 ${RELOCATING+${SBSS_START_SYMBOLS}} 178 ${CREATE_SHLIB+*(.${SBSS_NAME}2 .${SBSS_NAME}2.* .gnu.linkonce.sb2.*)} 179 *(.dyn${SBSS_NAME}) 180 *(.${SBSS_NAME}${RELOCATING+ .${SBSS_NAME}.* .gnu.linkonce.sb.*}) 181 *(.scommon) 182 ${RELOCATING+${SBSS_END_SYMBOLS}} 183 }" 184 SBSS2=".${SBSS_NAME}2 ${RELOCATING-0} : { *(.${SBSS_NAME}2${RELOCATING+ .${SBSS_NAME}2.* .gnu.linkonce.sb2.*}) }" 185 SDATA="/* We want the small data sections together, so single-instruction offsets 186 can access them all, and initialized data all before uninitialized, so 187 we can shorten the on-disk segment size. */ 188 .${SDATA_NAME} ${RELOCATING-0} : 189 { 190 ${RELOCATING+${SDATA_START_SYMBOLS}} 191 ${CREATE_SHLIB+*(.${SDATA_NAME}2 .${SDATA_NAME}2.* .gnu.linkonce.s2.*)} 192 *(.${SDATA_NAME}${RELOCATING+ .${SDATA_NAME}.* .gnu.linkonce.s.*}) 193 }" 194 SDATA2=".${SDATA_NAME}2 ${RELOCATING-0} : 195 { 196 ${RELOCATING+${SDATA2_START_SYMBOLS}} 197 *(.${SDATA_NAME}2${RELOCATING+ .${SDATA_NAME}2.* .gnu.linkonce.s2.*}) 198 }" 199 REL_SDATA=".rel.${SDATA_NAME} ${RELOCATING-0} : { *(.rel.${SDATA_NAME}${RELOCATING+ .rel.${SDATA_NAME}.* .rel.gnu.linkonce.s.*}) } 200 .rela.${SDATA_NAME} ${RELOCATING-0} : { *(.rela.${SDATA_NAME}${RELOCATING+ .rela.${SDATA_NAME}.* .rela.gnu.linkonce.s.*}) }" 201 REL_SBSS=".rel.${SBSS_NAME} ${RELOCATING-0} : { *(.rel.${SBSS_NAME}${RELOCATING+ .rel.${SBSS_NAME}.* .rel.gnu.linkonce.sb.*}) } 202 .rela.${SBSS_NAME} ${RELOCATING-0} : { *(.rela.${SBSS_NAME}${RELOCATING+ .rela.${SBSS_NAME}.* .rela.gnu.linkonce.sb.*}) }" 203 REL_SDATA2=".rel.${SDATA_NAME}2 ${RELOCATING-0} : { *(.rel.${SDATA_NAME}2${RELOCATING+ .rel.${SDATA_NAME}2.* .rel.gnu.linkonce.s2.*}) } 204 .rela.${SDATA_NAME}2 ${RELOCATING-0} : { *(.rela.${SDATA_NAME}2${RELOCATING+ .rela.${SDATA_NAME}2.* .rela.gnu.linkonce.s2.*}) }" 205 REL_SBSS2=".rel.${SBSS_NAME}2 ${RELOCATING-0} : { *(.rel.${SBSS_NAME}2${RELOCATING+ .rel.${SBSS_NAME}2.* .rel.gnu.linkonce.sb2.*}) } 206 .rela.${SBSS_NAME}2 ${RELOCATING-0} : { *(.rela.${SBSS_NAME}2${RELOCATING+ .rela.${SBSS_NAME}2.* .rela.gnu.linkonce.sb2.*}) }" 207else 208 NO_SMALL_DATA=" " 209fi 210if test -z "${SDATA_GOT}${DATA_GOT}"; then 211 if test -n "${NO_SMALL_DATA}"; then 212 DATA_GOT=" " 213 fi 214fi 215if test -z "${SDATA_GOT}${DATA_GOT}"; then 216 if test -z "${NO_SMALL_DATA}"; then 217 SDATA_GOT=" " 218 fi 219fi 220test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" " 221test "${LARGE_SECTIONS}" = "yes" && REL_LARGE=" 222 .rel.ldata ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) } 223 .rela.ldata ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) } 224 .rel.lbss ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) } 225 .rela.lbss ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) } 226 .rel.lrodata ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) } 227 .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }" 228test "${LARGE_SECTIONS}" = "yes" && LARGE_BSS=" 229 .lbss ${RELOCATING-0} : 230 { 231 *(.dynlbss) 232 *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*}) 233 *(LARGE_COMMON) 234 }" 235test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS=" 236 .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} : 237 { 238 *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*}) 239 } 240 .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} : 241 { 242 *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*}) 243 ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);} 244 }" 245if test "${ENABLE_INITFINI_ARRAY}" = "yes"; then 246 SORT_INIT_ARRAY="KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))" 247 SORT_FINI_ARRAY="KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))" 248 CTORS_IN_INIT_ARRAY="EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors" 249 DTORS_IN_FINI_ARRAY="EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors" 250else 251 SORT_INIT_ARRAY="KEEP (*(SORT(.init_array.*)))" 252 SORT_FINI_ARRAY="KEEP (*(SORT(.fini_array.*)))" 253 CTORS_IN_INIT_ARRAY= 254 DTORS_IN_FINI_ARRAY= 255fi 256INIT_ARRAY=".init_array ${RELOCATING-0} : 257 { 258 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}} 259 ${SORT_INIT_ARRAY} 260 KEEP (*(.init_array ${CTORS_IN_INIT_ARRAY})) 261 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}} 262 }" 263FINI_ARRAY=".fini_array ${RELOCATING-0} : 264 { 265 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}} 266 ${SORT_FINI_ARRAY} 267 KEEP (*(.fini_array ${DTORS_IN_FINI_ARRAY})) 268 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}} 269 }" 270CTOR=".ctors ${CONSTRUCTING-0} : 271 { 272 ${CONSTRUCTING+${CTOR_START}} 273 /* gcc uses crtbegin.o to find the start of 274 the constructors, so we make sure it is 275 first. Because this is a wildcard, it 276 doesn't matter if the user does not 277 actually link against crtbegin.o; the 278 linker won't look for a file to match a 279 wildcard. The wildcard also means that it 280 doesn't matter which directory crtbegin.o 281 is in. */ 282 283 KEEP (*crtbegin.o(.ctors)) 284 KEEP (*crtbegin?.o(.ctors)) 285 286 /* We don't want to include the .ctor section from 287 the crtend.o file until after the sorted ctors. 288 The .ctor section from the crtend file contains the 289 end of ctors marker and it must be last */ 290 291 KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors)) 292 KEEP (*(SORT(.ctors.*))) 293 KEEP (*(.ctors)) 294 ${CONSTRUCTING+${CTOR_END}} 295 }" 296DTOR=".dtors ${CONSTRUCTING-0} : 297 { 298 ${CONSTRUCTING+${DTOR_START}} 299 KEEP (*crtbegin.o(.dtors)) 300 KEEP (*crtbegin?.o(.dtors)) 301 KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors)) 302 KEEP (*(SORT(.dtors.*))) 303 KEEP (*(.dtors)) 304 ${CONSTRUCTING+${DTOR_END}} 305 }" 306STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} : 307 { 308 ${RELOCATING+${USER_LABEL_PREFIX}_stack = .;} 309 *(.stack) 310 }" 311 312TEXT_START_ADDR="SEGMENT_START(\"text-segment\", ${TEXT_START_ADDR})" 313SHLIB_TEXT_START_ADDR="SEGMENT_START(\"text-segment\", ${SHLIB_TEXT_START_ADDR:-0})" 314 315if [ -z "$SEPARATE_CODE" ]; then 316 SIZEOF_HEADERS_CODE=" + SIZEOF_HEADERS" 317else 318 SIZEOF_HEADERS_CODE= 319fi 320 321# If this is for an embedded system, don't add SIZEOF_HEADERS. 322if [ -z "$EMBEDDED" ]; then 323 test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}${SIZEOF_HEADERS_CODE}" 324else 325 test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}" 326fi 327 328cat <<EOF 329/* Copyright (C) 2014-2016 Free Software Foundation, Inc. 330 331 Copying and distribution of this script, with or without modification, 332 are permitted in any medium without royalty provided the copyright 333 notice and this notice are preserved. */ 334 335OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}", 336 "${LITTLE_OUTPUT_FORMAT}") 337OUTPUT_ARCH(${OUTPUT_ARCH}) 338${RELOCATING+ENTRY(${ENTRY})} 339 340${RELOCATING+${LIB_SEARCH_DIRS}} 341${RELOCATING+${EXECUTABLE_SYMBOLS}} 342${RELOCATING+${INPUT_FILES}} 343${RELOCATING- /* For some reason, the Solaris linker makes bad executables 344 if gld -r is used and the intermediate file has sections starting 345 at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld 346 bug. But for now assigning the zero vmas works. */} 347 348SECTIONS 349{ 350 /* Read-only sections, merged into text segment: */ 351 ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}} 352 ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR}${SIZEOF_HEADERS_CODE};}} 353 ${CREATE_PIE+${RELOCATING+PROVIDE (__executable_start = ${SHLIB_TEXT_START_ADDR}); . = ${SHLIB_TEXT_START_ADDR}${SIZEOF_HEADERS_CODE};}} 354EOF 355 356emit_early_ro() 357{ 358 cat <<EOF 359 ${INITIAL_READONLY_SECTIONS} 360 .note.gnu.build-id : { *(.note.gnu.build-id) } 361EOF 362} 363 364test -n "${SEPARATE_CODE}" || emit_early_ro 365 366test -n "${RELOCATING+0}" || unset NON_ALLOC_DYN 367test -z "${NON_ALLOC_DYN}" || TEXT_DYNAMIC= 368cat > ldscripts/dyntmp.$$ <<EOF 369 ${TEXT_DYNAMIC+${DYNAMIC}} 370 .hash ${RELOCATING-0} : { *(.hash) } 371 .gnu.hash ${RELOCATING-0} : { *(.gnu.hash) } 372 .dynsym ${RELOCATING-0} : { *(.dynsym) } 373 .dynstr ${RELOCATING-0} : { *(.dynstr) } 374 .gnu.version ${RELOCATING-0} : { *(.gnu.version) } 375 .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) } 376 .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) } 377EOF 378 379if [ "x$COMBRELOC" = x ]; then 380 COMBRELOCCAT="cat >> ldscripts/dyntmp.$$" 381else 382 COMBRELOCCAT="cat > $COMBRELOC" 383fi 384eval $COMBRELOCCAT <<EOF 385 ${INITIAL_RELOC_SECTIONS} 386 .rel.init ${RELOCATING-0} : { *(.rel.init) } 387 .rela.init ${RELOCATING-0} : { *(.rela.init) } 388 .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) } 389 .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) } 390 .rel.fini ${RELOCATING-0} : { *(.rel.fini) } 391 .rela.fini ${RELOCATING-0} : { *(.rela.fini) } 392 .rel.${RODATA_NAME} ${RELOCATING-0} : { *(.rel.${RODATA_NAME}${RELOCATING+ .rel.${RODATA_NAME}.* .rel.gnu.linkonce.r.*}) } 393 .rela.${RODATA_NAME} ${RELOCATING-0} : { *(.rela.${RODATA_NAME}${RELOCATING+ .rela.${RODATA_NAME}.* .rela.gnu.linkonce.r.*}) } 394 ${OTHER_READONLY_RELOC_SECTIONS} 395 .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+ .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*}) } 396 .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+ .rela.data.rel.ro.* .rela.gnu.linkonce.d.rel.ro.*}) } 397 .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) } 398 .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) } 399 ${OTHER_READWRITE_RELOC_SECTIONS} 400 .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) } 401 .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) } 402 .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) } 403 .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) } 404 .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) } 405 .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) } 406 .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) } 407 .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) } 408 .rel.got ${RELOCATING-0} : { *(.rel.got) } 409 .rela.got ${RELOCATING-0} : { *(.rela.got) } 410 ${OTHER_GOT_RELOC_SECTIONS} 411 ${REL_SDATA} 412 ${REL_SBSS} 413 ${REL_SDATA2} 414 ${REL_SBSS2} 415 .rel.${BSS_NAME} ${RELOCATING-0} : { *(.rel.${BSS_NAME}${RELOCATING+ .rel.${BSS_NAME}.* .rel.gnu.linkonce.b.*}) } 416 .rela.${BSS_NAME} ${RELOCATING-0} : { *(.rela.${BSS_NAME}${RELOCATING+ .rela.${BSS_NAME}.* .rela.gnu.linkonce.b.*}) } 417 ${REL_LARGE} 418 ${IREL_IN_PLT+$REL_IFUNC} 419 ${IREL_IN_PLT+$RELA_IFUNC} 420 ${IREL_IN_PLT-$REL_IPLT} 421 ${IREL_IN_PLT-$RELA_IPLT} 422EOF 423 424if [ -n "$COMBRELOC" ]; then 425cat >> ldscripts/dyntmp.$$ <<EOF 426 .rel.dyn ${RELOCATING-0} : 427 { 428EOF 429sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;/__rela_iplt_/d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$ 430cat >> ldscripts/dyntmp.$$ <<EOF 431 } 432 .rela.dyn ${RELOCATING-0} : 433 { 434EOF 435sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;/__rel_iplt_/d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$ 436cat >> ldscripts/dyntmp.$$ <<EOF 437 } 438EOF 439fi 440 441cat >> ldscripts/dyntmp.$$ <<EOF 442 .rel.plt ${RELOCATING-0} : 443 { 444 *(.rel.plt) 445 ${IREL_IN_PLT+${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rel_iplt_start = .);}}} 446 ${IREL_IN_PLT+${RELOCATING+*(.rel.iplt)}} 447 ${IREL_IN_PLT+${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rel_iplt_end = .);}}} 448 } 449 .rela.plt ${RELOCATING-0} : 450 { 451 *(.rela.plt) 452 ${IREL_IN_PLT+${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rela_iplt_start = .);}}} 453 ${IREL_IN_PLT+${RELOCATING+*(.rela.iplt)}} 454 ${IREL_IN_PLT+${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rela_iplt_end = .);}}} 455 } 456 ${OTHER_PLT_RELOC_SECTIONS} 457EOF 458 459emit_dyn() 460{ 461 if test -z "${NO_REL_RELOCS}${NO_RELA_RELOCS}"; then 462 cat ldscripts/dyntmp.$$ 463 else 464 if test -z "${NO_REL_RELOCS}"; then 465 sed -e '/^[ ]*\.rela\.[^}]*$/,/}/d;/^[ ]*\.rela\./d;/__rela_iplt_/d' ldscripts/dyntmp.$$ 466 fi 467 if test -z "${NO_RELA_RELOCS}"; then 468 sed -e '/^[ ]*\.rel\.[^}]*$/,/}/d;/^[ ]*\.rel\./d;/__rel_iplt_/d' ldscripts/dyntmp.$$ 469 fi 470 fi 471 rm -f ldscripts/dyntmp.$$ 472} 473 474test -n "${NON_ALLOC_DYN}${SEPARATE_CODE}" || emit_dyn 475 476cat <<EOF 477 .init ${RELOCATING-0}${RELOCATING+${INIT_ADDR}} : 478 { 479 ${RELOCATING+${INIT_START}} 480 KEEP (*(SORT_NONE(.init))) 481 ${RELOCATING+${INIT_END}} 482 } ${FILL} 483 484 ${TEXT_PLT+${PLT_NEXT_DATA-${PLT}}} 485 ${TINY_READONLY_SECTION} 486 .text ${RELOCATING-0} : 487 { 488 ${RELOCATING+${TEXT_START_SYMBOLS}} 489 ${RELOCATING+*(.text.unlikely .text.*_unlikely .text.unlikely.*)} 490 ${RELOCATING+*(.text.exit .text.exit.*)} 491 ${RELOCATING+*(.text.startup .text.startup.*)} 492 ${RELOCATING+*(.text.hot .text.hot.*)} 493 *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*}) 494 /* .gnu.warning sections are handled specially by elf32.em. */ 495 *(.gnu.warning) 496 ${RELOCATING+${OTHER_TEXT_SECTIONS}} 497 } ${FILL} 498 .fini ${RELOCATING-0}${RELOCATING+${FINI_ADDR}} : 499 { 500 ${RELOCATING+${FINI_START}} 501 KEEP (*(SORT_NONE(.fini))) 502 ${RELOCATING+${FINI_END}} 503 } ${FILL} 504 ${RELOCATING+PROVIDE (__${ETEXT_NAME} = .);} 505 ${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);} 506 ${RELOCATING+PROVIDE (${ETEXT_NAME} = .);} 507EOF 508 509if test -n "${SEPARATE_CODE}"; then 510 if test -n "${RODATA_ADDR}"; then 511 RODATA_ADDR="\ 512SEGMENT_START(\"rodata-segment\", ${RODATA_ADDR}) + SIZEOF_HEADERS" 513 else 514 RODATA_ADDR="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))" 515 RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${RODATA_ADDR})" 516 fi 517 if test -n "${SHLIB_RODATA_ADDR}"; then 518 SHLIB_RODATA_ADDR="\ 519SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR}) + SIZEOF_HEADERS" 520 else 521 SHLIB_RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR})" 522 SHLIB_RODATA_ADDR="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))" 523 fi 524 cat <<EOF 525 /* Adjust the address for the rodata segment. We want to adjust up to 526 the same address within the page on the next page up. */ 527 ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${RODATA_ADDR};}}} 528 ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_RODATA_ADDR};}} 529 ${CREATE_PIE+${RELOCATING+. = ${SHLIB_RODATA_ADDR};}} 530EOF 531 emit_early_ro 532 emit_dyn 533fi 534 535cat <<EOF 536 ${WRITABLE_RODATA-${RODATA}} 537 .${RODATA_NAME}1 ${RELOCATING-0} : { *(.${RODATA_NAME}1) } 538 ${CREATE_SHLIB-${SDATA2}} 539 ${CREATE_SHLIB-${SBSS2}} 540 ${OTHER_READONLY_SECTIONS} 541 .eh_frame_hdr : { *(.eh_frame_hdr) ${RELOCATING+*(.eh_frame_entry .eh_frame_entry.*)} } 542 .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) ${RELOCATING+*(.eh_frame.*)} } 543 .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table 544 .gcc_except_table.*) } 545 .gnu_extab ${RELOCATING-0} : ONLY_IF_RO { *(.gnu_extab*) } 546 /* These sections are generated by the Sun/Oracle C++ compiler. */ 547 .exception_ranges ${RELOCATING-0} : ONLY_IF_RO { *(.exception_ranges 548 .exception_ranges*) } 549 ${TEXT_PLT+${PLT_NEXT_DATA+${PLT}}} 550 551 /* Adjust the address for the data segment. We want to adjust up to 552 the same address within the page on the next page up. */ 553 ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}} 554 ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} 555 ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} 556 557 /* Exception handling */ 558 .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) ${RELOCATING+*(.eh_frame.*)} } 559 .gnu_extab ${RELOCATING-0} : ONLY_IF_RW { *(.gnu_extab) } 560 .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) } 561 .exception_ranges ${RELOCATING-0} : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) } 562 563 /* Thread Local Storage sections */ 564 .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) } 565 .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} } 566 567 .preinit_array ${RELOCATING-0} : 568 { 569 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}} 570 KEEP (*(.preinit_array)) 571 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}} 572 } 573 ${RELOCATING+${INIT_ARRAY}} 574 ${RELOCATING+${FINI_ARRAY}} 575 ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}} 576 ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}} 577 .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) } 578 579 ${RELOCATING+${DATARELRO}} 580 ${OTHER_RELRO_SECTIONS} 581 ${TEXT_DYNAMIC-${DYNAMIC}} 582 ${OTHER_RELRO_SECTIONS_2} 583 ${DATA_GOT+${RELRO_NOW+${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}}} 584 ${DATA_GOT+${RELRO_NOW+${GOT}}} 585 ${DATA_GOT+${RELRO_NOW+${GOTPLT}}} 586 ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}} 587 ${RELOCATING+${DATA_SEGMENT_RELRO_END}} 588 ${INITIAL_READWRITE_SECTIONS} 589 ${DATA_SDATA+${SDATA}} 590 ${DATA_SDATA+${OTHER_SDATA_SECTIONS}} 591 ${DATA_SDATA+${SBSS}} 592 ${DATA_GOT+${RELRO_NOW-${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}}} 593 ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}} 594 ${DATA_GOT+${RELRO_NOW-${GOTPLT}}} 595 596 ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}} 597 598 .data ${RELOCATING-0} : 599 { 600 ${RELOCATING+${DATA_START_SYMBOLS}} 601 *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*}) 602 ${CONSTRUCTING+SORT(CONSTRUCTORS)} 603 } 604 .data1 ${RELOCATING-0} : { *(.data1) } 605 ${WRITABLE_RODATA+${RODATA}} 606 ${OTHER_READWRITE_SECTIONS} 607 ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}} 608 ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}} 609 ${SDATA_GOT+${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}} 610 ${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS+. = .; ${OTHER_GOT_SYMBOLS}}}} 611 ${SDATA_GOT+${GOT}} 612 ${SDATA_GOT+${OTHER_GOT_SECTIONS}} 613 ${DATA_SDATA-${SDATA}} 614 ${DATA_SDATA-${OTHER_SDATA_SECTIONS}} 615 ${RELOCATING+${DATA_END_SYMBOLS-${USER_LABEL_PREFIX}_edata = .; PROVIDE (${USER_LABEL_PREFIX}edata = .);}} 616 ${RELOCATING+. = .;} 617 ${RELOCATING+${USER_LABEL_PREFIX}__bss_start = .;} 618 ${RELOCATING+${OTHER_BSS_SYMBOLS}} 619 ${DATA_SDATA-${SBSS}} 620 ${BSS_PLT+${PLT}} 621 .${BSS_NAME} ${RELOCATING-0} : 622 { 623 *(.dyn${BSS_NAME}) 624 *(.${BSS_NAME}${RELOCATING+ .${BSS_NAME}.* .gnu.linkonce.b.*}) 625 *(COMMON) 626 /* Align here to ensure that the .bss section occupies space up to 627 _end. Align after .bss to ensure correct alignment even if the 628 .bss section disappears because there are no input sections. 629 FIXME: Why do we need it? When there is no .bss section, we don't 630 pad the .data section. */ 631 ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);} 632 } 633 ${OTHER_BSS_SECTIONS} 634 ${LARGE_BSS_AFTER_BSS+${LARGE_BSS}} 635 ${RELOCATING+${OTHER_BSS_END_SYMBOLS}} 636 ${RELOCATING+. = ALIGN(${ALIGNMENT});} 637EOF 638 639LARGE_DATA_ADDR=". = SEGMENT_START(\"ldata-segment\", ${LARGE_DATA_ADDR-.});" 640SHLIB_LARGE_DATA_ADDR=". = SEGMENT_START(\"ldata-segment\", ${SHLIB_LARGE_DATA_ADDR-.});" 641 642 cat <<EOF 643 ${RELOCATING+${CREATE_SHLIB-${CREATE_PIE-${LARGE_DATA_ADDR}}}} 644 ${RELOCATING+${CREATE_SHLIB+${SHLIB_LARGE_DATA_ADDR}}} 645 ${RELOCATING+${CREATE_PIE+${SHLIB_LARGE_DATA_ADDR}}} 646 ${LARGE_SECTIONS} 647 ${LARGE_BSS_AFTER_BSS-${LARGE_BSS}} 648 ${RELOCATING+. = ALIGN(${ALIGNMENT});} 649 ${RELOCATING+${OTHER_END_SYMBOLS}} 650 ${RELOCATING+${END_SYMBOLS-${USER_LABEL_PREFIX}_end = .; PROVIDE (${USER_LABEL_PREFIX}end = .);}} 651 ${RELOCATING+${DATA_SEGMENT_END}} 652EOF 653 654test -z "${NON_ALLOC_DYN}" || emit_dyn 655 656cat <<EOF 657 /* Stabs debugging sections. */ 658 .stab 0 : { *(.stab) } 659 .stabstr 0 : { *(.stabstr) } 660 .stab.excl 0 : { *(.stab.excl) } 661 .stab.exclstr 0 : { *(.stab.exclstr) } 662 .stab.index 0 : { *(.stab.index) } 663 .stab.indexstr 0 : { *(.stab.indexstr) } 664 665 .comment 0 : { *(.comment) } 666 667EOF 668 669. $srcdir/scripttempl/DWARF.sc 670 671cat <<EOF 672 673 ${TINY_DATA_SECTION} 674 ${TINY_BSS_SECTION} 675 676 ${STACK_ADDR+${STACK}} 677 ${ATTRS_SECTIONS} 678 ${OTHER_SECTIONS} 679 ${RELOCATING+${OTHER_SYMBOLS}} 680 ${RELOCATING+${DISCARDED}} 681} 682EOF 683