1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree Include file for NXP Layerscape-1012A family SoC.
4 *
5 * Copyright 2016 Freescale Semiconductor, Inc.
6 * Copyright 2019-2020 NXP
7 *
8 */
9
10#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
11#include <dt-bindings/interrupt-controller/arm-gic.h>
12#include <dt-bindings/thermal/thermal.h>
13
14/ {
15	compatible = "fsl,ls1012a";
16	interrupt-parent = <&gic>;
17	#address-cells = <2>;
18	#size-cells = <2>;
19
20	aliases {
21		crypto = &crypto;
22		rtc1 = &ftm_alarm0;
23		rtic-a = &rtic_a;
24		rtic-b = &rtic_b;
25		rtic-c = &rtic_c;
26		rtic-d = &rtic_d;
27		sec-mon = &sec_mon;
28	};
29
30	cpus {
31		#address-cells = <1>;
32		#size-cells = <0>;
33
34		cpu0: cpu@0 {
35			device_type = "cpu";
36			compatible = "arm,cortex-a53";
37			reg = <0x0>;
38			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
39			#cooling-cells = <2>;
40			cpu-idle-states = <&CPU_PH20>;
41		};
42	};
43
44	idle-states {
45		/*
46		 * PSCI node is not added default, U-boot will add missing
47		 * parts if it determines to use PSCI.
48		 */
49		entry-method = "psci";
50
51		CPU_PH20: cpu-ph20 {
52			compatible = "arm,idle-state";
53			idle-state-name = "PH20";
54			arm,psci-suspend-param = <0x0>;
55			entry-latency-us = <1000>;
56			exit-latency-us = <1000>;
57			min-residency-us = <3000>;
58		};
59	};
60
61	sysclk: sysclk {
62		compatible = "fixed-clock";
63		#clock-cells = <0>;
64		clock-frequency = <125000000>;
65		clock-output-names = "sysclk";
66	};
67
68	coreclk: coreclk {
69		compatible = "fixed-clock";
70		#clock-cells = <0>;
71		clock-frequency = <100000000>;
72		clock-output-names = "coreclk";
73	};
74
75	timer {
76		compatible = "arm,armv8-timer";
77		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
78			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
79			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
80			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
81	};
82
83	pmu {
84		compatible = "arm,armv8-pmuv3";
85		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
86	};
87
88	gic: interrupt-controller@1400000 {
89		compatible = "arm,gic-400";
90		#interrupt-cells = <3>;
91		interrupt-controller;
92		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
93		      <0x0 0x1402000 0 0x2000>, /* GICC */
94		      <0x0 0x1404000 0 0x2000>, /* GICH */
95		      <0x0 0x1406000 0 0x2000>; /* GICV */
96		interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>;
97	};
98
99	reboot {
100		compatible = "syscon-reboot";
101		regmap = <&dcfg>;
102		offset = <0xb0>;
103		mask = <0x02>;
104	};
105
106	thermal-zones {
107		cpu_thermal: cpu-thermal {
108			polling-delay-passive = <1000>;
109			polling-delay = <5000>;
110			thermal-sensors = <&tmu 0>;
111
112			trips {
113				cpu_alert: cpu-alert {
114					temperature = <85000>;
115					hysteresis = <2000>;
116					type = "passive";
117				};
118
119				cpu_crit: cpu-crit {
120					temperature = <95000>;
121					hysteresis = <2000>;
122					type = "critical";
123				};
124			};
125
126			cooling-maps {
127				map0 {
128					trip = <&cpu_alert>;
129					cooling-device =
130						<&cpu0 THERMAL_NO_LIMIT
131						THERMAL_NO_LIMIT>;
132				};
133			};
134		};
135	};
136
137	soc {
138		compatible = "simple-bus";
139		#address-cells = <2>;
140		#size-cells = <2>;
141		ranges;
142
143		qspi: spi@1550000 {
144			compatible = "fsl,ls1021a-qspi";
145			#address-cells = <1>;
146			#size-cells = <0>;
147			reg = <0x0 0x1550000 0x0 0x10000>,
148				<0x0 0x40000000 0x0 0x10000000>;
149			reg-names = "QuadSPI", "QuadSPI-memory";
150			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
151			clock-names = "qspi_en", "qspi";
152			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
153					    QORIQ_CLK_PLL_DIV(1)>,
154				 <&clockgen QORIQ_CLK_PLATFORM_PLL
155					    QORIQ_CLK_PLL_DIV(1)>;
156			status = "disabled";
157		};
158
159		esdhc0: esdhc@1560000 {
160			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
161			reg = <0x0 0x1560000 0x0 0x10000>;
162			interrupts = <0 62 0x4>;
163			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
164					    QORIQ_CLK_PLL_DIV(1)>;
165			voltage-ranges = <1800 1800 3300 3300>;
166			sdhci,auto-cmd12;
167			big-endian;
168			bus-width = <4>;
169			status = "disabled";
170		};
171
172		scfg: scfg@1570000 {
173			compatible = "fsl,ls1012a-scfg", "syscon";
174			reg = <0x0 0x1570000 0x0 0x10000>;
175			big-endian;
176		};
177
178		esdhc1: esdhc@1580000 {
179			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
180			reg = <0x0 0x1580000 0x0 0x10000>;
181			interrupts = <0 65 0x4>;
182			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
183					    QORIQ_CLK_PLL_DIV(1)>;
184			voltage-ranges = <1800 1800 3300 3300>;
185			sdhci,auto-cmd12;
186			big-endian;
187			broken-cd;
188			bus-width = <4>;
189			status = "disabled";
190		};
191
192		crypto: crypto@1700000 {
193			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
194				     "fsl,sec-v4.0";
195			fsl,sec-era = <8>;
196			#address-cells = <1>;
197			#size-cells = <1>;
198			ranges = <0x0 0x00 0x1700000 0x100000>;
199			reg = <0x00 0x1700000 0x0 0x100000>;
200			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
201			dma-coherent;
202
203			sec_jr0: jr@10000 {
204				compatible = "fsl,sec-v5.4-job-ring",
205					     "fsl,sec-v5.0-job-ring",
206					     "fsl,sec-v4.0-job-ring";
207				reg = <0x10000 0x10000>;
208				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
209			};
210
211			sec_jr1: jr@20000 {
212				compatible = "fsl,sec-v5.4-job-ring",
213					     "fsl,sec-v5.0-job-ring",
214					     "fsl,sec-v4.0-job-ring";
215				reg = <0x20000 0x10000>;
216				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
217			};
218
219			sec_jr2: jr@30000 {
220				compatible = "fsl,sec-v5.4-job-ring",
221					     "fsl,sec-v5.0-job-ring",
222					     "fsl,sec-v4.0-job-ring";
223				reg = <0x30000 0x10000>;
224				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
225			};
226
227			sec_jr3: jr@40000 {
228				compatible = "fsl,sec-v5.4-job-ring",
229					     "fsl,sec-v5.0-job-ring",
230					     "fsl,sec-v4.0-job-ring";
231				reg = <0x40000 0x10000>;
232				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
233			};
234
235			rtic@60000 {
236				compatible = "fsl,sec-v5.4-rtic",
237					     "fsl,sec-v5.0-rtic",
238					     "fsl,sec-v4.0-rtic";
239				#address-cells = <1>;
240				#size-cells = <1>;
241				reg = <0x60000 0x100>, <0x60e00 0x18>;
242				ranges = <0x0 0x60100 0x500>;
243
244				rtic_a: rtic-a@0 {
245					compatible = "fsl,sec-v5.4-rtic-memory",
246						     "fsl,sec-v5.0-rtic-memory",
247						     "fsl,sec-v4.0-rtic-memory";
248					reg = <0x00 0x20>, <0x100 0x100>;
249				};
250
251				rtic_b: rtic-b@20 {
252					compatible = "fsl,sec-v5.4-rtic-memory",
253						     "fsl,sec-v5.0-rtic-memory",
254						     "fsl,sec-v4.0-rtic-memory";
255					reg = <0x20 0x20>, <0x200 0x100>;
256				};
257
258				rtic_c: rtic-c@40 {
259					compatible = "fsl,sec-v5.4-rtic-memory",
260						     "fsl,sec-v5.0-rtic-memory",
261						     "fsl,sec-v4.0-rtic-memory";
262					reg = <0x40 0x20>, <0x300 0x100>;
263				};
264
265				rtic_d: rtic-d@60 {
266					compatible = "fsl,sec-v5.4-rtic-memory",
267						     "fsl,sec-v5.0-rtic-memory",
268						     "fsl,sec-v4.0-rtic-memory";
269					reg = <0x60 0x20>, <0x400 0x100>;
270				};
271			};
272		};
273
274		sfp: efuse@1e80000 {
275			compatible = "fsl,ls1021a-sfp";
276			reg = <0x0 0x1e80000 0x0 0x10000>;
277			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
278					    QORIQ_CLK_PLL_DIV(4)>;
279			clock-names = "sfp";
280		};
281
282		sec_mon: sec_mon@1e90000 {
283			compatible = "fsl,sec-v5.4-mon", "fsl,sec-v5.0-mon",
284				     "fsl,sec-v4.0-mon";
285			reg = <0x0 0x1e90000 0x0 0x10000>;
286			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
287				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
288		};
289
290		dcfg: dcfg@1ee0000 {
291			compatible = "fsl,ls1012a-dcfg",
292				     "syscon";
293			reg = <0x0 0x1ee0000 0x0 0x10000>;
294			big-endian;
295		};
296
297		clockgen: clocking@1ee1000 {
298			compatible = "fsl,ls1012a-clockgen";
299			reg = <0x0 0x1ee1000 0x0 0x1000>;
300			#clock-cells = <2>;
301			clocks = <&sysclk &coreclk>;
302			clock-names = "sysclk", "coreclk";
303		};
304
305		tmu: tmu@1f00000 {
306			compatible = "fsl,qoriq-tmu";
307			reg = <0x0 0x1f00000 0x0 0x10000>;
308			interrupts = <0 33 0x4>;
309			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
310			fsl,tmu-calibration =
311					<0x00000000 0x00000025>,
312					<0x00000001 0x0000002c>,
313					<0x00000002 0x00000032>,
314					<0x00000003 0x00000039>,
315					<0x00000004 0x0000003f>,
316					<0x00000005 0x00000046>,
317					<0x00000006 0x0000004c>,
318					<0x00000007 0x00000053>,
319					<0x00000008 0x00000059>,
320					<0x00000009 0x0000005f>,
321					<0x0000000a 0x00000066>,
322					<0x0000000b 0x0000006c>,
323
324					<0x00010000 0x00000026>,
325					<0x00010001 0x0000002d>,
326					<0x00010002 0x00000035>,
327					<0x00010003 0x0000003d>,
328					<0x00010004 0x00000045>,
329					<0x00010005 0x0000004d>,
330					<0x00010006 0x00000055>,
331					<0x00010007 0x0000005d>,
332					<0x00010008 0x00000065>,
333					<0x00010009 0x0000006d>,
334
335					<0x00020000 0x00000026>,
336					<0x00020001 0x00000030>,
337					<0x00020002 0x0000003a>,
338					<0x00020003 0x00000044>,
339					<0x00020004 0x0000004e>,
340					<0x00020005 0x00000059>,
341					<0x00020006 0x00000063>,
342
343					<0x00030000 0x00000014>,
344					<0x00030001 0x00000021>,
345					<0x00030002 0x0000002e>,
346					<0x00030003 0x0000003a>,
347					<0x00030004 0x00000047>,
348					<0x00030005 0x00000053>,
349					<0x00030006 0x00000060>;
350			#thermal-sensor-cells = <1>;
351		};
352
353		i2c0: i2c@2180000 {
354			compatible = "fsl,vf610-i2c";
355			#address-cells = <1>;
356			#size-cells = <0>;
357			reg = <0x0 0x2180000 0x0 0x10000>;
358			interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
359			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
360					    QORIQ_CLK_PLL_DIV(4)>;
361			status = "disabled";
362		};
363
364		i2c1: i2c@2190000 {
365			compatible = "fsl,vf610-i2c";
366			#address-cells = <1>;
367			#size-cells = <0>;
368			reg = <0x0 0x2190000 0x0 0x10000>;
369			interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
370			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
371					    QORIQ_CLK_PLL_DIV(4)>;
372			status = "disabled";
373		};
374
375		dspi: spi@2100000 {
376			compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
377			#address-cells = <1>;
378			#size-cells = <0>;
379			reg = <0x0 0x2100000 0x0 0x10000>;
380			interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
381			clock-names = "dspi";
382			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
383					    QORIQ_CLK_PLL_DIV(1)>;
384			spi-num-chipselects = <5>;
385			big-endian;
386			status = "disabled";
387		};
388
389		duart0: serial@21c0500 {
390			compatible = "fsl,ns16550", "ns16550a";
391			reg = <0x00 0x21c0500 0x0 0x100>;
392			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
393			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
394					    QORIQ_CLK_PLL_DIV(1)>;
395			status = "disabled";
396		};
397
398		duart1: serial@21c0600 {
399			compatible = "fsl,ns16550", "ns16550a";
400			reg = <0x00 0x21c0600 0x0 0x100>;
401			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
402			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
403					    QORIQ_CLK_PLL_DIV(1)>;
404			status = "disabled";
405		};
406
407		gpio0: gpio@2300000 {
408			compatible = "fsl,qoriq-gpio";
409			reg = <0x0 0x2300000 0x0 0x10000>;
410			interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
411			gpio-controller;
412			#gpio-cells = <2>;
413			interrupt-controller;
414			#interrupt-cells = <2>;
415		};
416
417		gpio1: gpio@2310000 {
418			compatible = "fsl,qoriq-gpio";
419			reg = <0x0 0x2310000 0x0 0x10000>;
420			interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
421			gpio-controller;
422			#gpio-cells = <2>;
423			interrupt-controller;
424			#interrupt-cells = <2>;
425		};
426
427		wdog0: watchdog@2ad0000 {
428			compatible = "fsl,ls1012a-wdt",
429				     "fsl,imx21-wdt";
430			reg = <0x0 0x2ad0000 0x0 0x10000>;
431			interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
432			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>;
433			big-endian;
434		};
435
436		sai1: sai@2b50000 {
437			#sound-dai-cells = <0>;
438			compatible = "fsl,vf610-sai";
439			reg = <0x0 0x2b50000 0x0 0x10000>;
440			interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
441			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
442					    QORIQ_CLK_PLL_DIV(4)>,
443				 <&clockgen QORIQ_CLK_PLATFORM_PLL
444					    QORIQ_CLK_PLL_DIV(4)>,
445				 <&clockgen QORIQ_CLK_PLATFORM_PLL
446					    QORIQ_CLK_PLL_DIV(4)>,
447				 <&clockgen QORIQ_CLK_PLATFORM_PLL
448					    QORIQ_CLK_PLL_DIV(4)>;
449			clock-names = "bus", "mclk1", "mclk2", "mclk3";
450			dma-names = "tx", "rx";
451			dmas = <&edma0 1 47>,
452			       <&edma0 1 46>;
453			status = "disabled";
454		};
455
456		sai2: sai@2b60000 {
457			#sound-dai-cells = <0>;
458			compatible = "fsl,vf610-sai";
459			reg = <0x0 0x2b60000 0x0 0x10000>;
460			interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
461			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
462					    QORIQ_CLK_PLL_DIV(4)>,
463				 <&clockgen QORIQ_CLK_PLATFORM_PLL
464					    QORIQ_CLK_PLL_DIV(4)>,
465				 <&clockgen QORIQ_CLK_PLATFORM_PLL
466					    QORIQ_CLK_PLL_DIV(4)>,
467				 <&clockgen QORIQ_CLK_PLATFORM_PLL
468					    QORIQ_CLK_PLL_DIV(4)>;
469			clock-names = "bus", "mclk1", "mclk2", "mclk3";
470			dma-names = "tx", "rx";
471			dmas = <&edma0 1 45>,
472			       <&edma0 1 44>;
473			status = "disabled";
474		};
475
476		edma0: dma-controller@2c00000 {
477			#dma-cells = <2>;
478			compatible = "fsl,vf610-edma";
479			reg = <0x0 0x2c00000 0x0 0x10000>,
480			      <0x0 0x2c10000 0x0 0x10000>,
481			      <0x0 0x2c20000 0x0 0x10000>;
482			interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>,
483				     <0 103 IRQ_TYPE_LEVEL_HIGH>;
484			interrupt-names = "edma-tx", "edma-err";
485			dma-channels = <32>;
486			big-endian;
487			clock-names = "dmamux0", "dmamux1";
488			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
489					    QORIQ_CLK_PLL_DIV(4)>,
490				 <&clockgen QORIQ_CLK_PLATFORM_PLL
491					    QORIQ_CLK_PLL_DIV(4)>;
492		};
493
494		usb0: usb@2f00000 {
495			compatible = "snps,dwc3";
496			reg = <0x0 0x2f00000 0x0 0x10000>;
497			interrupts = <0 60 0x4>;
498			dr_mode = "host";
499			snps,quirk-frame-length-adjustment = <0x20>;
500			snps,dis_rxdet_inp3_quirk;
501			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
502		};
503
504		sata: sata@3200000 {
505			compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
506			reg = <0x0 0x3200000 0x0 0x10000>,
507				<0x0 0x20140520 0x0 0x4>;
508			reg-names = "ahci", "sata-ecc";
509			interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
510			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
511					    QORIQ_CLK_PLL_DIV(1)>;
512			dma-coherent;
513			status = "disabled";
514		};
515
516		usb1: usb@8600000 {
517			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
518			reg = <0x0 0x8600000 0x0 0x1000>;
519			interrupts = <0 139 0x4>;
520			dr_mode = "host";
521			phy_type = "ulpi";
522		};
523
524		msi: msi-controller1@1572000 {
525			compatible = "fsl,ls1012a-msi";
526			reg = <0x0 0x1572000 0x0 0x8>;
527			msi-controller;
528			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
529		};
530
531		pcie1: pcie@3400000 {
532			compatible = "fsl,ls1012a-pcie";
533			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
534			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
535			reg-names = "regs", "config";
536			interrupts = <0 118 0x4>, /* controller interrupt */
537				     <0 117 0x4>; /* PME interrupt */
538			interrupt-names = "aer", "pme";
539			#address-cells = <3>;
540			#size-cells = <2>;
541			device_type = "pci";
542			num-viewport = <2>;
543			bus-range = <0x0 0xff>;
544			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
545				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
546			msi-parent = <&msi>;
547			#interrupt-cells = <1>;
548			interrupt-map-mask = <0 0 0 7>;
549			interrupt-map = <0000 0 0 1 &gic 0 110 IRQ_TYPE_LEVEL_HIGH>,
550					<0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>,
551					<0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>,
552					<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
553			status = "disabled";
554		};
555
556		rcpm: power-controller@1ee2140 {
557			compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+";
558			reg = <0x0 0x1ee2140 0x0 0x4>;
559			#fsl,rcpm-wakeup-cells = <1>;
560		};
561
562		ftm_alarm0: timer@29d0000 {
563			compatible = "fsl,ls1012a-ftm-alarm";
564			reg = <0x0 0x29d0000 0x0 0x10000>;
565			fsl,rcpm-wakeup = <&rcpm 0x20000>;
566			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
567			big-endian;
568		};
569	};
570
571	firmware {
572		optee {
573			compatible = "linaro,optee-tz";
574			method = "smc";
575		};
576	};
577};
578