1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree Include file for NXP Layerscape-1012A family SoC.
4 *
5 * Copyright 2016 Freescale Semiconductor, Inc.
6 * Copyright 2019-2020 NXP
7 *
8 */
9
10#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
11#include <dt-bindings/interrupt-controller/arm-gic.h>
12#include <dt-bindings/thermal/thermal.h>
13
14/ {
15	compatible = "fsl,ls1012a";
16	interrupt-parent = <&gic>;
17	#address-cells = <2>;
18	#size-cells = <2>;
19
20	aliases {
21		crypto = &crypto;
22		rtc1 = &ftm_alarm0;
23		rtic-a = &rtic_a;
24		rtic-b = &rtic_b;
25		rtic-c = &rtic_c;
26		rtic-d = &rtic_d;
27		sec-mon = &sec_mon;
28	};
29
30	cpus {
31		#address-cells = <1>;
32		#size-cells = <0>;
33
34		cpu0: cpu@0 {
35			device_type = "cpu";
36			compatible = "arm,cortex-a53";
37			reg = <0x0>;
38			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
39			#cooling-cells = <2>;
40			cpu-idle-states = <&CPU_PH20>;
41		};
42	};
43
44	idle-states {
45		/*
46		 * PSCI node is not added default, U-boot will add missing
47		 * parts if it determines to use PSCI.
48		 */
49		entry-method = "psci";
50
51		CPU_PH20: cpu-ph20 {
52			compatible = "arm,idle-state";
53			idle-state-name = "PH20";
54			arm,psci-suspend-param = <0x0>;
55			entry-latency-us = <1000>;
56			exit-latency-us = <1000>;
57			min-residency-us = <3000>;
58		};
59	};
60
61	sysclk: sysclk {
62		compatible = "fixed-clock";
63		#clock-cells = <0>;
64		clock-frequency = <125000000>;
65		clock-output-names = "sysclk";
66	};
67
68	coreclk: coreclk {
69		compatible = "fixed-clock";
70		#clock-cells = <0>;
71		clock-frequency = <100000000>;
72		clock-output-names = "coreclk";
73	};
74
75	timer {
76		compatible = "arm,armv8-timer";
77		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
78			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
79			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
80			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
81	};
82
83	pmu {
84		compatible = "arm,armv8-pmuv3";
85		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
86	};
87
88	gic: interrupt-controller@1400000 {
89		compatible = "arm,gic-400";
90		#interrupt-cells = <3>;
91		interrupt-controller;
92		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
93		      <0x0 0x1402000 0 0x2000>, /* GICC */
94		      <0x0 0x1404000 0 0x2000>, /* GICH */
95		      <0x0 0x1406000 0 0x2000>; /* GICV */
96		interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>;
97	};
98
99	reboot {
100		compatible = "syscon-reboot";
101		regmap = <&dcfg>;
102		offset = <0xb0>;
103		mask = <0x02>;
104	};
105
106	thermal-zones {
107		cpu_thermal: cpu-thermal {
108			polling-delay-passive = <1000>;
109			polling-delay = <5000>;
110			thermal-sensors = <&tmu 0>;
111
112			trips {
113				cpu_alert: cpu-alert {
114					temperature = <85000>;
115					hysteresis = <2000>;
116					type = "passive";
117				};
118
119				cpu_crit: cpu-crit {
120					temperature = <95000>;
121					hysteresis = <2000>;
122					type = "critical";
123				};
124			};
125
126			cooling-maps {
127				map0 {
128					trip = <&cpu_alert>;
129					cooling-device =
130						<&cpu0 THERMAL_NO_LIMIT
131						THERMAL_NO_LIMIT>;
132				};
133			};
134		};
135	};
136
137	soc {
138		compatible = "simple-bus";
139		#address-cells = <2>;
140		#size-cells = <2>;
141		ranges;
142
143		qspi: spi@1550000 {
144			compatible = "fsl,ls1021a-qspi";
145			#address-cells = <1>;
146			#size-cells = <0>;
147			reg = <0x0 0x1550000 0x0 0x10000>,
148				<0x0 0x40000000 0x0 0x10000000>;
149			reg-names = "QuadSPI", "QuadSPI-memory";
150			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
151			clock-names = "qspi_en", "qspi";
152			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
153					    QORIQ_CLK_PLL_DIV(1)>,
154				 <&clockgen QORIQ_CLK_PLATFORM_PLL
155					    QORIQ_CLK_PLL_DIV(1)>;
156			status = "disabled";
157		};
158
159		esdhc0: esdhc@1560000 {
160			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
161			reg = <0x0 0x1560000 0x0 0x10000>;
162			interrupts = <0 62 0x4>;
163			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
164					    QORIQ_CLK_PLL_DIV(1)>;
165			voltage-ranges = <1800 1800 3300 3300>;
166			sdhci,auto-cmd12;
167			big-endian;
168			bus-width = <4>;
169			status = "disabled";
170		};
171
172		scfg: scfg@1570000 {
173			compatible = "fsl,ls1012a-scfg", "syscon";
174			reg = <0x0 0x1570000 0x0 0x10000>;
175			big-endian;
176		};
177
178		esdhc1: esdhc@1580000 {
179			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
180			reg = <0x0 0x1580000 0x0 0x10000>;
181			interrupts = <0 65 0x4>;
182			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
183					    QORIQ_CLK_PLL_DIV(1)>;
184			voltage-ranges = <1800 1800 3300 3300>;
185			sdhci,auto-cmd12;
186			big-endian;
187			broken-cd;
188			bus-width = <4>;
189			status = "disabled";
190		};
191
192		crypto: crypto@1700000 {
193			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
194				     "fsl,sec-v4.0";
195			fsl,sec-era = <8>;
196			#address-cells = <1>;
197			#size-cells = <1>;
198			ranges = <0x0 0x00 0x1700000 0x100000>;
199			reg = <0x00 0x1700000 0x0 0x100000>;
200			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
201			dma-coherent;
202
203			sec_jr0: jr@10000 {
204				compatible = "fsl,sec-v5.4-job-ring",
205					     "fsl,sec-v5.0-job-ring",
206					     "fsl,sec-v4.0-job-ring";
207				reg = <0x10000 0x10000>;
208				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
209			};
210
211			sec_jr1: jr@20000 {
212				compatible = "fsl,sec-v5.4-job-ring",
213					     "fsl,sec-v5.0-job-ring",
214					     "fsl,sec-v4.0-job-ring";
215				reg = <0x20000 0x10000>;
216				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
217			};
218
219			sec_jr2: jr@30000 {
220				compatible = "fsl,sec-v5.4-job-ring",
221					     "fsl,sec-v5.0-job-ring",
222					     "fsl,sec-v4.0-job-ring";
223				reg = <0x30000 0x10000>;
224				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
225			};
226
227			sec_jr3: jr@40000 {
228				compatible = "fsl,sec-v5.4-job-ring",
229					     "fsl,sec-v5.0-job-ring",
230					     "fsl,sec-v4.0-job-ring";
231				reg = <0x40000 0x10000>;
232				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
233			};
234
235			rtic@60000 {
236				compatible = "fsl,sec-v5.4-rtic",
237					     "fsl,sec-v5.0-rtic",
238					     "fsl,sec-v4.0-rtic";
239				#address-cells = <1>;
240				#size-cells = <1>;
241				reg = <0x60000 0x100>, <0x60e00 0x18>;
242				ranges = <0x0 0x60100 0x500>;
243
244				rtic_a: rtic-a@0 {
245					compatible = "fsl,sec-v5.4-rtic-memory",
246						     "fsl,sec-v5.0-rtic-memory",
247						     "fsl,sec-v4.0-rtic-memory";
248					reg = <0x00 0x20>, <0x100 0x100>;
249				};
250
251				rtic_b: rtic-b@20 {
252					compatible = "fsl,sec-v5.4-rtic-memory",
253						     "fsl,sec-v5.0-rtic-memory",
254						     "fsl,sec-v4.0-rtic-memory";
255					reg = <0x20 0x20>, <0x200 0x100>;
256				};
257
258				rtic_c: rtic-c@40 {
259					compatible = "fsl,sec-v5.4-rtic-memory",
260						     "fsl,sec-v5.0-rtic-memory",
261						     "fsl,sec-v4.0-rtic-memory";
262					reg = <0x40 0x20>, <0x300 0x100>;
263				};
264
265				rtic_d: rtic-d@60 {
266					compatible = "fsl,sec-v5.4-rtic-memory",
267						     "fsl,sec-v5.0-rtic-memory",
268						     "fsl,sec-v4.0-rtic-memory";
269					reg = <0x60 0x20>, <0x400 0x100>;
270				};
271			};
272		};
273
274		sfp: efuse@1e80000 {
275			compatible = "fsl,ls1021a-sfp";
276			reg = <0x0 0x1e80000 0x0 0x10000>;
277			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
278					    QORIQ_CLK_PLL_DIV(4)>;
279			clock-names = "sfp";
280		};
281
282		sec_mon: sec_mon@1e90000 {
283			compatible = "fsl,sec-v5.4-mon", "fsl,sec-v5.0-mon",
284				     "fsl,sec-v4.0-mon";
285			reg = <0x0 0x1e90000 0x0 0x10000>;
286			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
287				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
288		};
289
290		dcfg: dcfg@1ee0000 {
291			compatible = "fsl,ls1012a-dcfg",
292				     "syscon";
293			reg = <0x0 0x1ee0000 0x0 0x10000>;
294			big-endian;
295		};
296
297		clockgen: clocking@1ee1000 {
298			compatible = "fsl,ls1012a-clockgen";
299			reg = <0x0 0x1ee1000 0x0 0x1000>;
300			#clock-cells = <2>;
301			clocks = <&sysclk &coreclk>;
302			clock-names = "sysclk", "coreclk";
303		};
304
305		tmu: tmu@1f00000 {
306			compatible = "fsl,qoriq-tmu";
307			reg = <0x0 0x1f00000 0x0 0x10000>;
308			interrupts = <0 33 0x4>;
309			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
310			fsl,tmu-calibration = <0x00000000 0x00000025
311					       0x00000001 0x0000002c
312					       0x00000002 0x00000032
313					       0x00000003 0x00000039
314					       0x00000004 0x0000003f
315					       0x00000005 0x00000046
316					       0x00000006 0x0000004c
317					       0x00000007 0x00000053
318					       0x00000008 0x00000059
319					       0x00000009 0x0000005f
320					       0x0000000a 0x00000066
321					       0x0000000b 0x0000006c
322
323					       0x00010000 0x00000026
324					       0x00010001 0x0000002d
325					       0x00010002 0x00000035
326					       0x00010003 0x0000003d
327					       0x00010004 0x00000045
328					       0x00010005 0x0000004d
329					       0x00010006 0x00000055
330					       0x00010007 0x0000005d
331					       0x00010008 0x00000065
332					       0x00010009 0x0000006d
333
334					       0x00020000 0x00000026
335					       0x00020001 0x00000030
336					       0x00020002 0x0000003a
337					       0x00020003 0x00000044
338					       0x00020004 0x0000004e
339					       0x00020005 0x00000059
340					       0x00020006 0x00000063
341
342					       0x00030000 0x00000014
343					       0x00030001 0x00000021
344					       0x00030002 0x0000002e
345					       0x00030003 0x0000003a
346					       0x00030004 0x00000047
347					       0x00030005 0x00000053
348					       0x00030006 0x00000060>;
349			big-endian;
350			#thermal-sensor-cells = <1>;
351		};
352
353		i2c0: i2c@2180000 {
354			compatible = "fsl,vf610-i2c";
355			#address-cells = <1>;
356			#size-cells = <0>;
357			reg = <0x0 0x2180000 0x0 0x10000>;
358			interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
359			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
360					    QORIQ_CLK_PLL_DIV(4)>;
361			status = "disabled";
362		};
363
364		i2c1: i2c@2190000 {
365			compatible = "fsl,vf610-i2c";
366			#address-cells = <1>;
367			#size-cells = <0>;
368			reg = <0x0 0x2190000 0x0 0x10000>;
369			interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
370			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
371					    QORIQ_CLK_PLL_DIV(4)>;
372			status = "disabled";
373		};
374
375		dspi: spi@2100000 {
376			compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
377			#address-cells = <1>;
378			#size-cells = <0>;
379			reg = <0x0 0x2100000 0x0 0x10000>;
380			interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
381			clock-names = "dspi";
382			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
383					    QORIQ_CLK_PLL_DIV(1)>;
384			spi-num-chipselects = <5>;
385			big-endian;
386			status = "disabled";
387		};
388
389		duart0: serial@21c0500 {
390			compatible = "fsl,ns16550", "ns16550a";
391			reg = <0x00 0x21c0500 0x0 0x100>;
392			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
393			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
394					    QORIQ_CLK_PLL_DIV(1)>;
395			status = "disabled";
396		};
397
398		duart1: serial@21c0600 {
399			compatible = "fsl,ns16550", "ns16550a";
400			reg = <0x00 0x21c0600 0x0 0x100>;
401			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
402			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
403					    QORIQ_CLK_PLL_DIV(1)>;
404			status = "disabled";
405		};
406
407		gpio0: gpio@2300000 {
408			compatible = "fsl,qoriq-gpio";
409			reg = <0x0 0x2300000 0x0 0x10000>;
410			interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
411			gpio-controller;
412			#gpio-cells = <2>;
413			interrupt-controller;
414			#interrupt-cells = <2>;
415		};
416
417		gpio1: gpio@2310000 {
418			compatible = "fsl,qoriq-gpio";
419			reg = <0x0 0x2310000 0x0 0x10000>;
420			interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
421			gpio-controller;
422			#gpio-cells = <2>;
423			interrupt-controller;
424			#interrupt-cells = <2>;
425		};
426
427		wdog0: watchdog@2ad0000 {
428			compatible = "fsl,ls1012a-wdt",
429				     "fsl,imx21-wdt";
430			reg = <0x0 0x2ad0000 0x0 0x10000>;
431			interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
432			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>;
433			big-endian;
434		};
435
436		sai1: sai@2b50000 {
437			#sound-dai-cells = <0>;
438			compatible = "fsl,vf610-sai";
439			reg = <0x0 0x2b50000 0x0 0x10000>;
440			interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
441			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
442					    QORIQ_CLK_PLL_DIV(4)>,
443				 <&clockgen QORIQ_CLK_PLATFORM_PLL
444					    QORIQ_CLK_PLL_DIV(4)>,
445				 <&clockgen QORIQ_CLK_PLATFORM_PLL
446					    QORIQ_CLK_PLL_DIV(4)>,
447				 <&clockgen QORIQ_CLK_PLATFORM_PLL
448					    QORIQ_CLK_PLL_DIV(4)>;
449			clock-names = "bus", "mclk1", "mclk2", "mclk3";
450			dma-names = "tx", "rx";
451			dmas = <&edma0 1 47>,
452			       <&edma0 1 46>;
453			status = "disabled";
454		};
455
456		sai2: sai@2b60000 {
457			#sound-dai-cells = <0>;
458			compatible = "fsl,vf610-sai";
459			reg = <0x0 0x2b60000 0x0 0x10000>;
460			interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
461			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
462					    QORIQ_CLK_PLL_DIV(4)>,
463				 <&clockgen QORIQ_CLK_PLATFORM_PLL
464					    QORIQ_CLK_PLL_DIV(4)>,
465				 <&clockgen QORIQ_CLK_PLATFORM_PLL
466					    QORIQ_CLK_PLL_DIV(4)>,
467				 <&clockgen QORIQ_CLK_PLATFORM_PLL
468					    QORIQ_CLK_PLL_DIV(4)>;
469			clock-names = "bus", "mclk1", "mclk2", "mclk3";
470			dma-names = "tx", "rx";
471			dmas = <&edma0 1 45>,
472			       <&edma0 1 44>;
473			status = "disabled";
474		};
475
476		edma0: dma-controller@2c00000 {
477			#dma-cells = <2>;
478			compatible = "fsl,vf610-edma";
479			reg = <0x0 0x2c00000 0x0 0x10000>,
480			      <0x0 0x2c10000 0x0 0x10000>,
481			      <0x0 0x2c20000 0x0 0x10000>;
482			interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>,
483				     <0 103 IRQ_TYPE_LEVEL_HIGH>;
484			interrupt-names = "edma-tx", "edma-err";
485			dma-channels = <32>;
486			big-endian;
487			clock-names = "dmamux0", "dmamux1";
488			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
489					    QORIQ_CLK_PLL_DIV(4)>,
490				 <&clockgen QORIQ_CLK_PLATFORM_PLL
491					    QORIQ_CLK_PLL_DIV(4)>;
492		};
493
494		usb0: usb@2f00000 {
495			compatible = "snps,dwc3";
496			reg = <0x0 0x2f00000 0x0 0x10000>;
497			interrupts = <0 60 0x4>;
498			dr_mode = "host";
499			snps,quirk-frame-length-adjustment = <0x20>;
500			snps,dis_rxdet_inp3_quirk;
501			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
502		};
503
504		sata: sata@3200000 {
505			compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
506			reg = <0x0 0x3200000 0x0 0x10000>,
507				<0x0 0x20140520 0x0 0x4>;
508			reg-names = "ahci", "sata-ecc";
509			interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
510			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
511					    QORIQ_CLK_PLL_DIV(1)>;
512			dma-coherent;
513			status = "disabled";
514		};
515
516		usb1: usb@8600000 {
517			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
518			reg = <0x0 0x8600000 0x0 0x1000>;
519			interrupts = <0 139 0x4>;
520			dr_mode = "host";
521			phy_type = "ulpi";
522		};
523
524		msi: msi-controller1@1572000 {
525			compatible = "fsl,ls1012a-msi";
526			reg = <0x0 0x1572000 0x0 0x8>;
527			msi-controller;
528			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
529		};
530
531		pcie1: pcie@3400000 {
532			compatible = "fsl,ls1012a-pcie";
533			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
534			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
535			reg-names = "regs", "config";
536			interrupts = <0 118 0x4>, /* controller interrupt */
537				     <0 117 0x4>; /* PME interrupt */
538			interrupt-names = "aer", "pme";
539			#address-cells = <3>;
540			#size-cells = <2>;
541			device_type = "pci";
542			num-viewport = <2>;
543			bus-range = <0x0 0xff>;
544			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
545				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
546			msi-parent = <&msi>;
547			#interrupt-cells = <1>;
548			interrupt-map-mask = <0 0 0 7>;
549			interrupt-map = <0000 0 0 1 &gic 0 110 IRQ_TYPE_LEVEL_HIGH>,
550					<0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>,
551					<0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>,
552					<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
553			status = "disabled";
554		};
555
556		rcpm: power-controller@1ee2140 {
557			compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+";
558			reg = <0x0 0x1ee2140 0x0 0x4>;
559			#fsl,rcpm-wakeup-cells = <1>;
560		};
561
562		ftm_alarm0: timer@29d0000 {
563			compatible = "fsl,ls1012a-ftm-alarm";
564			reg = <0x0 0x29d0000 0x0 0x10000>;
565			fsl,rcpm-wakeup = <&rcpm 0x20000>;
566			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
567			big-endian;
568		};
569	};
570
571	firmware {
572		optee {
573			compatible = "linaro,optee-tz";
574			method = "smc";
575		};
576	};
577};
578