xref: /linux/arch/arm64/boot/dts/ti/k3-am642-sk.dts (revision fdf47b3a)
1// SPDX-License-Identifier: GPL-2.0-only OR MIT
2/*
3 * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/phy/phy.h>
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/net/ti-dp83867.h>
11#include <dt-bindings/leds/common.h>
12#include "k3-am642.dtsi"
13
14#include "k3-serdes.h"
15
16/ {
17	compatible = "ti,am642-sk", "ti,am642";
18	model = "Texas Instruments AM642 SK";
19
20	chosen {
21		stdout-path = &main_uart0;
22	};
23
24	aliases {
25		serial0 = &mcu_uart0;
26		serial1 = &main_uart1;
27		serial2 = &main_uart0;
28		i2c0 = &main_i2c0;
29		i2c1 = &main_i2c1;
30		mmc0 = &sdhci0;
31		mmc1 = &sdhci1;
32		ethernet0 = &cpsw_port1;
33		ethernet1 = &cpsw_port2;
34	};
35
36	memory@80000000 {
37		bootph-pre-ram;
38		device_type = "memory";
39		/* 2G RAM */
40		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
41	};
42
43	reserved-memory {
44		#address-cells = <2>;
45		#size-cells = <2>;
46		ranges;
47
48		secure_ddr: optee@9e800000 {
49			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
50			alignment = <0x1000>;
51			no-map;
52		};
53
54		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
55			compatible = "shared-dma-pool";
56			reg = <0x00 0xa0000000 0x00 0x100000>;
57			no-map;
58		};
59
60		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
61			compatible = "shared-dma-pool";
62			reg = <0x00 0xa0100000 0x00 0xf00000>;
63			no-map;
64		};
65
66		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
67			compatible = "shared-dma-pool";
68			reg = <0x00 0xa1000000 0x00 0x100000>;
69			no-map;
70		};
71
72		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
73			compatible = "shared-dma-pool";
74			reg = <0x00 0xa1100000 0x00 0xf00000>;
75			no-map;
76		};
77
78		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
79			compatible = "shared-dma-pool";
80			reg = <0x00 0xa2000000 0x00 0x100000>;
81			no-map;
82		};
83
84		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
85			compatible = "shared-dma-pool";
86			reg = <0x00 0xa2100000 0x00 0xf00000>;
87			no-map;
88		};
89
90		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
91			compatible = "shared-dma-pool";
92			reg = <0x00 0xa3000000 0x00 0x100000>;
93			no-map;
94		};
95
96		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
97			compatible = "shared-dma-pool";
98			reg = <0x00 0xa3100000 0x00 0xf00000>;
99			no-map;
100		};
101
102		rtos_ipc_memory_region: ipc-memories@a5000000 {
103			reg = <0x00 0xa5000000 0x00 0x00800000>;
104			alignment = <0x1000>;
105			no-map;
106		};
107	};
108
109	vusb_main: regulator-0 {
110		/* USB MAIN INPUT 5V DC */
111		bootph-all;
112		compatible = "regulator-fixed";
113		regulator-name = "vusb_main5v0";
114		regulator-min-microvolt = <5000000>;
115		regulator-max-microvolt = <5000000>;
116		regulator-always-on;
117		regulator-boot-on;
118	};
119
120	vcc_3v3_sys: regulator-1 {
121		/* output of LP8733xx */
122		bootph-all;
123		compatible = "regulator-fixed";
124		regulator-name = "vcc_3v3_sys";
125		regulator-min-microvolt = <3300000>;
126		regulator-max-microvolt = <3300000>;
127		vin-supply = <&vusb_main>;
128		regulator-always-on;
129		regulator-boot-on;
130	};
131
132	vdd_mmc1: regulator-2 {
133		/* TPS2051BD */
134		bootph-all;
135		compatible = "regulator-fixed";
136		regulator-name = "vdd_mmc1";
137		regulator-min-microvolt = <3300000>;
138		regulator-max-microvolt = <3300000>;
139		regulator-boot-on;
140		enable-active-high;
141		vin-supply = <&vcc_3v3_sys>;
142		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
143	};
144
145	com8_ls_en: regulator-3 {
146		compatible = "regulator-fixed";
147		regulator-name = "com8_ls_en";
148		regulator-min-microvolt = <3300000>;
149		regulator-max-microvolt = <3300000>;
150		regulator-always-on;
151		regulator-boot-on;
152		pinctrl-0 = <&main_com8_ls_en_pins_default>;
153		pinctrl-names = "default";
154		gpio = <&main_gpio0 62 GPIO_ACTIVE_LOW>;
155	};
156
157	wlan_en: regulator-4 {
158		/* output of SN74AVC4T245RSVR */
159		compatible = "regulator-fixed";
160		regulator-name = "wlan_en";
161		regulator-min-microvolt = <1800000>;
162		regulator-max-microvolt = <1800000>;
163		enable-active-high;
164		pinctrl-0 = <&main_wlan_en_pins_default>;
165		pinctrl-names = "default";
166		vin-supply = <&com8_ls_en>;
167		gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>;
168	};
169
170	led-controller {
171		compatible = "gpio-leds";
172
173		led-0 {
174			color = <LED_COLOR_ID_GREEN>;
175			function = LED_FUNCTION_INDICATOR;
176			function-enumerator = <1>;
177			gpios = <&exp2 0 GPIO_ACTIVE_HIGH>;
178			default-state = "off";
179		};
180
181		led-1 {
182			color = <LED_COLOR_ID_RED>;
183			function = LED_FUNCTION_INDICATOR;
184			function-enumerator = <2>;
185			gpios = <&exp2 1 GPIO_ACTIVE_HIGH>;
186			default-state = "off";
187		};
188
189		led-2 {
190			color = <LED_COLOR_ID_GREEN>;
191			function = LED_FUNCTION_INDICATOR;
192			function-enumerator = <3>;
193			gpios = <&exp2 2 GPIO_ACTIVE_HIGH>;
194			default-state = "off";
195		};
196
197		led-3 {
198			color = <LED_COLOR_ID_AMBER>;
199			function = LED_FUNCTION_INDICATOR;
200			function-enumerator = <4>;
201			gpios = <&exp2 3 GPIO_ACTIVE_HIGH>;
202			default-state = "off";
203		};
204
205		led-4 {
206			color = <LED_COLOR_ID_GREEN>;
207			function = LED_FUNCTION_INDICATOR;
208			function-enumerator = <5>;
209			gpios = <&exp2 4 GPIO_ACTIVE_HIGH>;
210			default-state = "off";
211		};
212
213		led-5 {
214			color = <LED_COLOR_ID_RED>;
215			function = LED_FUNCTION_INDICATOR;
216			function-enumerator = <6>;
217			gpios = <&exp2 5 GPIO_ACTIVE_HIGH>;
218			default-state = "off";
219		};
220
221		led-6 {
222			color = <LED_COLOR_ID_GREEN>;
223			function = LED_FUNCTION_INDICATOR;
224			function-enumerator = <7>;
225			gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
226			default-state = "off";
227		};
228
229		led-7 {
230			color = <LED_COLOR_ID_AMBER>;
231			function = LED_FUNCTION_HEARTBEAT;
232			function-enumerator = <8>;
233			linux,default-trigger = "heartbeat";
234			gpios = <&exp2 7 GPIO_ACTIVE_HIGH>;
235		};
236	};
237};
238
239&main_pmx0 {
240	main_mmc1_pins_default: main-mmc1-default-pins {
241		bootph-all;
242		pinctrl-single,pins = <
243			AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */
244			AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */
245			AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */
246			AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* (#N/A) MMC1_CLKLB */
247			AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */
248			AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */
249			AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */
250			AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */
251			AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */
252		>;
253	};
254
255	main_uart0_pins_default: main-uart0-default-pins {
256		bootph-all;
257		pinctrl-single,pins = <
258			AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
259			AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
260			AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */
261			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
262		>;
263	};
264
265	main_uart1_pins_default: main-uart1-default-pins {
266		bootph-pre-ram;
267		pinctrl-single,pins = <
268			AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */
269			AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */
270			AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */
271			AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */
272		>;
273	};
274
275	main_usb0_pins_default: main-usb0-default-pins {
276		bootph-all;
277		pinctrl-single,pins = <
278			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
279		>;
280	};
281
282	main_i2c0_pins_default: main-i2c0-default-pins {
283		bootph-all;
284		pinctrl-single,pins = <
285			AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
286			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
287		>;
288	};
289
290	main_i2c1_pins_default: main-i2c1-default-pins {
291		bootph-all;
292		pinctrl-single,pins = <
293			AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
294			AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
295		>;
296	};
297
298	mdio1_pins_default: mdio1-default-pins {
299		pinctrl-single,pins = <
300			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
301			AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
302		>;
303	};
304
305	rgmii1_pins_default: rgmii1-default-pins {
306		pinctrl-single,pins = <
307			AM64X_IOPAD(0x011c, PIN_INPUT, 4) /* (AA13) PRG1_PRU1_GPO5.RGMII1_RD0 */
308			AM64X_IOPAD(0x0128, PIN_INPUT, 4) /* (U12) PRG1_PRU1_GPO8.RGMII1_RD1 */
309			AM64X_IOPAD(0x0150, PIN_INPUT, 4) /* (Y13) PRG1_PRU1_GPO18.RGMII1_RD2 */
310			AM64X_IOPAD(0x0154, PIN_INPUT, 4) /* (V12) PRG1_PRU1_GPO19.RGMII1_RD3 */
311			AM64X_IOPAD(0x00d8, PIN_INPUT, 4) /* (W13) PRG1_PRU0_GPO8.RGMII1_RXC */
312			AM64X_IOPAD(0x00cc, PIN_INPUT, 4) /* (V13) PRG1_PRU0_GPO5.RGMII1_RX_CTL */
313			AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
314			AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
315			AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
316			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
317			AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
318			AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
319		>;
320	};
321
322       rgmii2_pins_default: rgmii2-default-pins {
323		pinctrl-single,pins = <
324			AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
325			AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
326			AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */
327			AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */
328			AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */
329			AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
330			AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */
331			AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */
332			AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */
333			AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */
334			AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */
335			AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
336		>;
337	};
338
339	ospi0_pins_default: ospi0-default-pins {
340		pinctrl-single,pins = <
341			AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */
342			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */
343			AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */
344			AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */
345			AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */
346			AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */
347			AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */
348			AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */
349			AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */
350			AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */
351			AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
352		>;
353	};
354
355	main_ecap0_pins_default: main-ecap0-default-pins {
356		pinctrl-single,pins = <
357			AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */
358		>;
359	};
360	main_wlan_en_pins_default: main-wlan-en-default-pins {
361		pinctrl-single,pins = <
362			AM64X_IOPAD(0x00c4, PIN_OUTPUT_PULLUP, 7) /* (V8) GPIO0_48 */
363		>;
364	};
365
366	main_com8_ls_en_pins_default: main-com8-ls-en-default-pins {
367		pinctrl-single,pins = <
368			AM64X_IOPAD(0x00fc, PIN_OUTPUT, 7) /* (U7) PRG1_PRU0_GPO17.GPIO0_62 */
369		>;
370	};
371
372	main_wlan_pins_default: main-wlan-default-pins {
373		pinctrl-single,pins = <
374			AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */
375		>;
376	};
377};
378
379&main_uart0 {
380	bootph-all;
381	status = "okay";
382	pinctrl-names = "default";
383	pinctrl-0 = <&main_uart0_pins_default>;
384};
385
386&main_uart1 {
387	/* main_uart1 is reserved for firmware usage */
388	bootph-pre-ram;
389	status = "reserved";
390	pinctrl-names = "default";
391	pinctrl-0 = <&main_uart1_pins_default>;
392};
393
394&main_i2c0 {
395	bootph-all;
396	status = "okay";
397	pinctrl-names = "default";
398	pinctrl-0 = <&main_i2c0_pins_default>;
399	clock-frequency = <400000>;
400
401	eeprom@51 {
402		compatible = "atmel,24c512";
403		reg = <0x51>;
404	};
405};
406
407&main_i2c1 {
408	bootph-all;
409	status = "okay";
410	pinctrl-names = "default";
411	pinctrl-0 = <&main_i2c1_pins_default>;
412	clock-frequency = <400000>;
413
414	exp1: gpio@70 {
415		bootph-all;
416		compatible = "nxp,pca9538";
417		reg = <0x70>;
418		gpio-controller;
419		#gpio-cells = <2>;
420		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
421				  "PRU_DETECT", "MMC1_SD_EN",
422				  "VPP_LDO_EN", "RPI_PS_3V3_En",
423				  "RPI_PS_5V0_En", "RPI_HAT_DETECT";
424	};
425
426	exp2: gpio@60 {
427		compatible = "ti,tpic2810";
428		reg = <0x60>;
429		gpio-controller;
430		#gpio-cells = <2>;
431		gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8";
432	};
433
434	/* SoC power supply temperature */
435	tmp100@48 {
436		compatible = "ti,tmp100";
437		reg = <0x48>;
438	};
439
440	/* DDR power supply temperature */
441	tmp100@49 {
442		compatible = "ti,tmp100";
443		reg = <0x49>;
444	};
445};
446
447/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
448&mcu_gpio0 {
449	status = "reserved";
450};
451
452&mcu_gpio_intr {
453	status = "reserved";
454};
455
456&sdhci0 {
457	status = "okay";
458	vmmc-supply = <&wlan_en>;
459	bus-width = <4>;
460	non-removable;
461	cap-power-off-card;
462	keep-power-in-suspend;
463	ti,driver-strength-ohm = <50>;
464
465	#address-cells = <1>;
466	#size-cells = <0>;
467	wlcore: wlcore@2 {
468		compatible = "ti,wl1837";
469		reg = <2>;
470		pinctrl-0 = <&main_wlan_pins_default>;
471		pinctrl-names = "default";
472		interrupt-parent = <&main_gpio0>;
473		interrupts = <46 IRQ_TYPE_EDGE_FALLING>;
474	};
475};
476
477/* SD/MMC */
478&sdhci1 {
479	bootph-all;
480	status = "okay";
481	vmmc-supply = <&vdd_mmc1>;
482	pinctrl-names = "default";
483	pinctrl-0 = <&main_mmc1_pins_default>;
484	disable-wp;
485};
486
487&serdes_ln_ctrl {
488	bootph-all;
489	idle-states = <AM64_SERDES0_LANE0_USB>;
490};
491
492&serdes_refclk {
493	bootph-all;
494};
495
496&serdes_wiz0 {
497	bootph-all;
498};
499
500&serdes0 {
501	bootph-all;
502	serdes0_usb_link: phy@0 {
503		bootph-all;
504		reg = <0>;
505		cdns,num-lanes = <1>;
506		#phy-cells = <0>;
507		cdns,phy-type = <PHY_TYPE_USB3>;
508		resets = <&serdes_wiz0 1>;
509	};
510};
511
512&usbss0 {
513	bootph-all;
514	ti,vbus-divider;
515};
516
517&usb0 {
518	bootph-all;
519	dr_mode = "host";
520	maximum-speed = "super-speed";
521	pinctrl-names = "default";
522	pinctrl-0 = <&main_usb0_pins_default>;
523	phys = <&serdes0_usb_link>;
524	phy-names = "cdns3,usb3-phy";
525};
526
527&cpsw3g {
528	pinctrl-names = "default";
529	pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>;
530	status = "okay";
531};
532
533&cpsw_port1 {
534	phy-mode = "rgmii-rxid";
535	phy-handle = <&cpsw3g_phy0>;
536	status = "okay";
537};
538
539&cpsw_port2 {
540	phy-mode = "rgmii-rxid";
541	phy-handle = <&cpsw3g_phy1>;
542	status = "okay";
543};
544
545&cpsw3g_mdio {
546	status = "okay";
547	pinctrl-names = "default";
548	pinctrl-0 = <&mdio1_pins_default>;
549
550	cpsw3g_phy0: ethernet-phy@0 {
551		reg = <0>;
552		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
553		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
554	};
555
556	cpsw3g_phy1: ethernet-phy@1 {
557		reg = <1>;
558		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
559		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
560	};
561};
562
563&ospi0 {
564	status = "okay";
565	pinctrl-names = "default";
566	pinctrl-0 = <&ospi0_pins_default>;
567
568	flash@0 {
569		compatible = "jedec,spi-nor";
570		reg = <0x0>;
571		spi-tx-bus-width = <8>;
572		spi-rx-bus-width = <8>;
573		spi-max-frequency = <25000000>;
574		cdns,tshsl-ns = <60>;
575		cdns,tsd2d-ns = <60>;
576		cdns,tchsh-ns = <60>;
577		cdns,tslch-ns = <60>;
578		cdns,read-delay = <4>;
579
580		partitions {
581			compatible = "fixed-partitions";
582			#address-cells = <1>;
583			#size-cells = <1>;
584
585			partition@0 {
586				label = "ospi.tiboot3";
587				reg = <0x0 0x100000>;
588			};
589
590			partition@100000 {
591				label = "ospi.tispl";
592				reg = <0x100000 0x200000>;
593			};
594
595			partition@300000 {
596				label = "ospi.u-boot";
597				reg = <0x300000 0x400000>;
598			};
599
600			partition@700000 {
601				label = "ospi.env";
602				reg = <0x700000 0x40000>;
603			};
604
605			partition@740000 {
606				label = "ospi.env.backup";
607				reg = <0x740000 0x40000>;
608			};
609
610			partition@800000 {
611				label = "ospi.rootfs";
612				reg = <0x800000 0x37c0000>;
613			};
614
615			partition@3fc0000 {
616				label = "ospi.phypattern";
617				reg = <0x3fc0000 0x40000>;
618			};
619		};
620	};
621};
622
623&mailbox0_cluster2 {
624	status = "okay";
625
626	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
627		ti,mbox-rx = <0 0 2>;
628		ti,mbox-tx = <1 0 2>;
629	};
630
631	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
632		ti,mbox-rx = <2 0 2>;
633		ti,mbox-tx = <3 0 2>;
634	};
635};
636
637&mailbox0_cluster4 {
638	status = "okay";
639
640	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
641		ti,mbox-rx = <0 0 2>;
642		ti,mbox-tx = <1 0 2>;
643	};
644
645	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
646		ti,mbox-rx = <2 0 2>;
647		ti,mbox-tx = <3 0 2>;
648	};
649};
650
651&mailbox0_cluster6 {
652	status = "okay";
653
654	mbox_m4_0: mbox-m4-0 {
655		ti,mbox-rx = <0 0 2>;
656		ti,mbox-tx = <1 0 2>;
657	};
658};
659
660&main_r5fss0_core0 {
661	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
662	memory-region = <&main_r5fss0_core0_dma_memory_region>,
663			<&main_r5fss0_core0_memory_region>;
664};
665
666&main_r5fss0_core1 {
667	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
668	memory-region = <&main_r5fss0_core1_dma_memory_region>,
669			<&main_r5fss0_core1_memory_region>;
670};
671
672&main_r5fss1_core0 {
673	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
674	memory-region = <&main_r5fss1_core0_dma_memory_region>,
675			<&main_r5fss1_core0_memory_region>;
676};
677
678&main_r5fss1_core1 {
679	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
680	memory-region = <&main_r5fss1_core1_dma_memory_region>,
681			<&main_r5fss1_core1_memory_region>;
682};
683
684&ecap0 {
685	status = "okay";
686	/* PWM is available on Pin 1 of header J3 */
687	pinctrl-names = "default";
688	pinctrl-0 = <&main_ecap0_pins_default>;
689};
690