1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Intel Multiprocessor Specification 1.1 and 1.4
4 * compliant MP-table parsing routines.
5 *
6 * (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
7 * (c) 1998, 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com>
8 * (c) 2008 Alexey Starikovskiy <astarikovskiy@suse.de>
9 */
10
11 #include <linux/mm.h>
12 #include <linux/init.h>
13 #include <linux/delay.h>
14 #include <linux/memblock.h>
15 #include <linux/kernel_stat.h>
16 #include <linux/mc146818rtc.h>
17 #include <linux/bitops.h>
18 #include <linux/acpi.h>
19 #include <linux/smp.h>
20 #include <linux/pci.h>
21
22 #include <asm/i8259.h>
23 #include <asm/io_apic.h>
24 #include <asm/acpi.h>
25 #include <asm/irqdomain.h>
26 #include <asm/mtrr.h>
27 #include <asm/mpspec.h>
28 #include <asm/proto.h>
29 #include <asm/bios_ebda.h>
30 #include <asm/e820/api.h>
31 #include <asm/setup.h>
32 #include <asm/smp.h>
33
34 #include <asm/apic.h>
35 /*
36 * Checksum an MP configuration block.
37 */
38
39 static unsigned int num_procs __initdata;
40
mpf_checksum(unsigned char * mp,int len)41 static int __init mpf_checksum(unsigned char *mp, int len)
42 {
43 int sum = 0;
44
45 while (len--)
46 sum += *mp++;
47
48 return sum & 0xFF;
49 }
50
MP_processor_info(struct mpc_cpu * m)51 static void __init MP_processor_info(struct mpc_cpu *m)
52 {
53 char *bootup_cpu = "";
54
55 topology_register_apic(m->apicid, CPU_ACPIID_INVALID, m->cpuflag & CPU_ENABLED);
56 if (!(m->cpuflag & CPU_ENABLED))
57 return;
58
59 if (m->cpuflag & CPU_BOOTPROCESSOR)
60 bootup_cpu = " (Bootup-CPU)";
61
62 pr_info("Processor #%d%s\n", m->apicid, bootup_cpu);
63 num_procs++;
64 }
65
66 #ifdef CONFIG_X86_IO_APIC
mpc_oem_bus_info(struct mpc_bus * m,char * str)67 static void __init mpc_oem_bus_info(struct mpc_bus *m, char *str)
68 {
69 memcpy(str, m->bustype, 6);
70 str[6] = 0;
71 apic_pr_verbose("Bus #%d is %s\n", m->busid, str);
72 }
73
MP_bus_info(struct mpc_bus * m)74 static void __init MP_bus_info(struct mpc_bus *m)
75 {
76 char str[7];
77
78 mpc_oem_bus_info(m, str);
79
80 #if MAX_MP_BUSSES < 256
81 if (m->busid >= MAX_MP_BUSSES) {
82 pr_warn("MP table busid value (%d) for bustype %s is too large, max. supported is %d\n",
83 m->busid, str, MAX_MP_BUSSES - 1);
84 return;
85 }
86 #endif
87
88 set_bit(m->busid, mp_bus_not_pci);
89 if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
90 #ifdef CONFIG_EISA
91 mp_bus_id_to_type[m->busid] = MP_BUS_ISA;
92 #endif
93 } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
94 clear_bit(m->busid, mp_bus_not_pci);
95 #ifdef CONFIG_EISA
96 mp_bus_id_to_type[m->busid] = MP_BUS_PCI;
97 } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
98 mp_bus_id_to_type[m->busid] = MP_BUS_EISA;
99 #endif
100 } else
101 pr_warn("Unknown bustype %s - ignoring\n", str);
102 }
103
MP_ioapic_info(struct mpc_ioapic * m)104 static void __init MP_ioapic_info(struct mpc_ioapic *m)
105 {
106 struct ioapic_domain_cfg cfg = {
107 .type = IOAPIC_DOMAIN_LEGACY,
108 .ops = &mp_ioapic_irqdomain_ops,
109 };
110
111 if (m->flags & MPC_APIC_USABLE)
112 mp_register_ioapic(m->apicid, m->apicaddr, gsi_top, &cfg);
113 }
114
print_mp_irq_info(struct mpc_intsrc * mp_irq)115 static void __init print_mp_irq_info(struct mpc_intsrc *mp_irq)
116 {
117 apic_printk(APIC_VERBOSE,
118 "Int: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC INT %02x\n",
119 mp_irq->irqtype, mp_irq->irqflag & 3,
120 (mp_irq->irqflag >> 2) & 3, mp_irq->srcbus,
121 mp_irq->srcbusirq, mp_irq->dstapic, mp_irq->dstirq);
122 }
123
124 #else /* CONFIG_X86_IO_APIC */
MP_bus_info(struct mpc_bus * m)125 static inline void __init MP_bus_info(struct mpc_bus *m) {}
MP_ioapic_info(struct mpc_ioapic * m)126 static inline void __init MP_ioapic_info(struct mpc_ioapic *m) {}
127 #endif /* CONFIG_X86_IO_APIC */
128
MP_lintsrc_info(struct mpc_lintsrc * m)129 static void __init MP_lintsrc_info(struct mpc_lintsrc *m)
130 {
131 apic_printk(APIC_VERBOSE,
132 "Lint: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC LINT %02x\n",
133 m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbusid,
134 m->srcbusirq, m->destapic, m->destapiclint);
135 }
136
137 /*
138 * Read/parse the MPC
139 */
smp_check_mpc(struct mpc_table * mpc,char * oem,char * str)140 static int __init smp_check_mpc(struct mpc_table *mpc, char *oem, char *str)
141 {
142
143 if (memcmp(mpc->signature, MPC_SIGNATURE, 4)) {
144 pr_err("MPTABLE: bad signature [%c%c%c%c]!\n",
145 mpc->signature[0], mpc->signature[1],
146 mpc->signature[2], mpc->signature[3]);
147 return 0;
148 }
149 if (mpf_checksum((unsigned char *)mpc, mpc->length)) {
150 pr_err("MPTABLE: checksum error!\n");
151 return 0;
152 }
153 if (mpc->spec != 0x01 && mpc->spec != 0x04) {
154 pr_err("MPTABLE: bad table version (%d)!!\n", mpc->spec);
155 return 0;
156 }
157 if (!mpc->lapic) {
158 pr_err("MPTABLE: null local APIC address!\n");
159 return 0;
160 }
161 memcpy(oem, mpc->oem, 8);
162 oem[8] = 0;
163 pr_info("MPTABLE: OEM ID: %s\n", oem);
164
165 memcpy(str, mpc->productid, 12);
166 str[12] = 0;
167
168 pr_info("MPTABLE: Product ID: %s\n", str);
169
170 pr_info("MPTABLE: APIC at: 0x%X\n", mpc->lapic);
171
172 return 1;
173 }
174
skip_entry(unsigned char ** ptr,int * count,int size)175 static void skip_entry(unsigned char **ptr, int *count, int size)
176 {
177 *ptr += size;
178 *count += size;
179 }
180
smp_dump_mptable(struct mpc_table * mpc,unsigned char * mpt)181 static void __init smp_dump_mptable(struct mpc_table *mpc, unsigned char *mpt)
182 {
183 pr_err("Your mptable is wrong, contact your HW vendor!\n");
184 pr_cont("type %x\n", *mpt);
185 print_hex_dump(KERN_ERR, " ", DUMP_PREFIX_ADDRESS, 16,
186 1, mpc, mpc->length, 1);
187 }
188
smp_read_mpc(struct mpc_table * mpc,unsigned early)189 static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
190 {
191 char str[16];
192 char oem[10];
193
194 int count = sizeof(*mpc);
195 unsigned char *mpt = ((unsigned char *)mpc) + count;
196
197 if (!smp_check_mpc(mpc, oem, str))
198 return 0;
199
200 if (early) {
201 /* Initialize the lapic mapping */
202 if (!acpi_lapic)
203 register_lapic_address(mpc->lapic);
204 return 1;
205 }
206
207 /* Now process the configuration blocks. */
208 while (count < mpc->length) {
209 switch (*mpt) {
210 case MP_PROCESSOR:
211 /* ACPI may have already provided this data */
212 if (!acpi_lapic)
213 MP_processor_info((struct mpc_cpu *)mpt);
214 skip_entry(&mpt, &count, sizeof(struct mpc_cpu));
215 break;
216 case MP_BUS:
217 MP_bus_info((struct mpc_bus *)mpt);
218 skip_entry(&mpt, &count, sizeof(struct mpc_bus));
219 break;
220 case MP_IOAPIC:
221 MP_ioapic_info((struct mpc_ioapic *)mpt);
222 skip_entry(&mpt, &count, sizeof(struct mpc_ioapic));
223 break;
224 case MP_INTSRC:
225 mp_save_irq((struct mpc_intsrc *)mpt);
226 skip_entry(&mpt, &count, sizeof(struct mpc_intsrc));
227 break;
228 case MP_LINTSRC:
229 MP_lintsrc_info((struct mpc_lintsrc *)mpt);
230 skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc));
231 break;
232 default:
233 /* wrong mptable */
234 smp_dump_mptable(mpc, mpt);
235 count = mpc->length;
236 break;
237 }
238 }
239
240 if (!num_procs && !acpi_lapic)
241 pr_err("MPTABLE: no processors registered!\n");
242 return num_procs || acpi_lapic;
243 }
244
245 #ifdef CONFIG_X86_IO_APIC
246
ELCR_trigger(unsigned int irq)247 static int __init ELCR_trigger(unsigned int irq)
248 {
249 unsigned int port;
250
251 port = PIC_ELCR1 + (irq >> 3);
252 return (inb(port) >> (irq & 7)) & 1;
253 }
254
construct_default_ioirq_mptable(int mpc_default_type)255 static void __init construct_default_ioirq_mptable(int mpc_default_type)
256 {
257 struct mpc_intsrc intsrc;
258 int i;
259 int ELCR_fallback = 0;
260
261 intsrc.type = MP_INTSRC;
262 intsrc.irqflag = MP_IRQTRIG_DEFAULT | MP_IRQPOL_DEFAULT;
263 intsrc.srcbus = 0;
264 intsrc.dstapic = mpc_ioapic_id(0);
265
266 intsrc.irqtype = mp_INT;
267
268 /*
269 * If true, we have an ISA/PCI system with no IRQ entries
270 * in the MP table. To prevent the PCI interrupts from being set up
271 * incorrectly, we try to use the ELCR. The sanity check to see if
272 * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
273 * never be level sensitive, so we simply see if the ELCR agrees.
274 * If it does, we assume it's valid.
275 */
276 if (mpc_default_type == 5) {
277 pr_info("ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
278
279 if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) ||
280 ELCR_trigger(13))
281 pr_err("ELCR contains invalid data... not using ELCR\n");
282 else {
283 pr_info("Using ELCR to identify PCI interrupts\n");
284 ELCR_fallback = 1;
285 }
286 }
287
288 for (i = 0; i < 16; i++) {
289 switch (mpc_default_type) {
290 case 2:
291 if (i == 0 || i == 13)
292 continue; /* IRQ0 & IRQ13 not connected */
293 fallthrough;
294 default:
295 if (i == 2)
296 continue; /* IRQ2 is never connected */
297 }
298
299 if (ELCR_fallback) {
300 /*
301 * If the ELCR indicates a level-sensitive interrupt, we
302 * copy that information over to the MP table in the
303 * irqflag field (level sensitive, active high polarity).
304 */
305 if (ELCR_trigger(i)) {
306 intsrc.irqflag = MP_IRQTRIG_LEVEL |
307 MP_IRQPOL_ACTIVE_HIGH;
308 } else {
309 intsrc.irqflag = MP_IRQTRIG_DEFAULT |
310 MP_IRQPOL_DEFAULT;
311 }
312 }
313
314 intsrc.srcbusirq = i;
315 intsrc.dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
316 mp_save_irq(&intsrc);
317 }
318
319 intsrc.irqtype = mp_ExtINT;
320 intsrc.srcbusirq = 0;
321 intsrc.dstirq = 0; /* 8259A to INTIN0 */
322 mp_save_irq(&intsrc);
323 }
324
325
construct_ioapic_table(int mpc_default_type)326 static void __init construct_ioapic_table(int mpc_default_type)
327 {
328 struct mpc_ioapic ioapic;
329 struct mpc_bus bus;
330
331 bus.type = MP_BUS;
332 bus.busid = 0;
333 switch (mpc_default_type) {
334 default:
335 pr_err("???\nUnknown standard configuration %d\n",
336 mpc_default_type);
337 fallthrough;
338 case 1:
339 case 5:
340 memcpy(bus.bustype, "ISA ", 6);
341 break;
342 case 2:
343 case 6:
344 case 3:
345 memcpy(bus.bustype, "EISA ", 6);
346 break;
347 }
348 MP_bus_info(&bus);
349 if (mpc_default_type > 4) {
350 bus.busid = 1;
351 memcpy(bus.bustype, "PCI ", 6);
352 MP_bus_info(&bus);
353 }
354
355 ioapic.type = MP_IOAPIC;
356 ioapic.apicid = 2;
357 ioapic.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
358 ioapic.flags = MPC_APIC_USABLE;
359 ioapic.apicaddr = IO_APIC_DEFAULT_PHYS_BASE;
360 MP_ioapic_info(&ioapic);
361
362 /*
363 * We set up most of the low 16 IO-APIC pins according to MPS rules.
364 */
365 construct_default_ioirq_mptable(mpc_default_type);
366 }
367 #else
construct_ioapic_table(int mpc_default_type)368 static inline void __init construct_ioapic_table(int mpc_default_type) { }
369 #endif
370
construct_default_ISA_mptable(int mpc_default_type)371 static inline void __init construct_default_ISA_mptable(int mpc_default_type)
372 {
373 struct mpc_cpu processor;
374 struct mpc_lintsrc lintsrc;
375 int linttypes[2] = { mp_ExtINT, mp_NMI };
376 int i;
377
378 /*
379 * 2 CPUs, numbered 0 & 1.
380 */
381 processor.type = MP_PROCESSOR;
382 /* Either an integrated APIC or a discrete 82489DX. */
383 processor.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
384 processor.cpuflag = CPU_ENABLED;
385 processor.cpufeature = (boot_cpu_data.x86 << 8) |
386 (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_stepping;
387 processor.featureflag = boot_cpu_data.x86_capability[CPUID_1_EDX];
388 processor.reserved[0] = 0;
389 processor.reserved[1] = 0;
390 for (i = 0; i < 2; i++) {
391 processor.apicid = i;
392 MP_processor_info(&processor);
393 }
394
395 construct_ioapic_table(mpc_default_type);
396
397 lintsrc.type = MP_LINTSRC;
398 lintsrc.irqflag = MP_IRQTRIG_DEFAULT | MP_IRQPOL_DEFAULT;
399 lintsrc.srcbusid = 0;
400 lintsrc.srcbusirq = 0;
401 lintsrc.destapic = MP_APIC_ALL;
402 for (i = 0; i < 2; i++) {
403 lintsrc.irqtype = linttypes[i];
404 lintsrc.destapiclint = i;
405 MP_lintsrc_info(&lintsrc);
406 }
407 }
408
409 static unsigned long mpf_base;
410 static bool mpf_found;
411
get_mpc_size(unsigned long physptr)412 static unsigned long __init get_mpc_size(unsigned long physptr)
413 {
414 struct mpc_table *mpc;
415 unsigned long size;
416
417 mpc = early_memremap(physptr, PAGE_SIZE);
418 size = mpc->length;
419 early_memunmap(mpc, PAGE_SIZE);
420 apic_pr_verbose(" mpc: %lx-%lx\n", physptr, physptr + size);
421
422 return size;
423 }
424
check_physptr(struct mpf_intel * mpf,unsigned int early)425 static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)
426 {
427 struct mpc_table *mpc;
428 unsigned long size;
429
430 size = get_mpc_size(mpf->physptr);
431 mpc = early_memremap(mpf->physptr, size);
432
433 /*
434 * Read the physical hardware table. Anything here will
435 * override the defaults.
436 */
437 if (!smp_read_mpc(mpc, early)) {
438 #ifdef CONFIG_X86_LOCAL_APIC
439 smp_found_config = 0;
440 #endif
441 pr_err("BIOS bug, MP table errors detected!...\n");
442 pr_cont("... disabling SMP support. (tell your hw vendor)\n");
443 early_memunmap(mpc, size);
444 return -1;
445 }
446 early_memunmap(mpc, size);
447
448 if (early)
449 return -1;
450
451 #ifdef CONFIG_X86_IO_APIC
452 /*
453 * If there are no explicit MP IRQ entries, then we are
454 * broken. We set up most of the low 16 IO-APIC pins to
455 * ISA defaults and hope it will work.
456 */
457 if (!mp_irq_entries) {
458 struct mpc_bus bus;
459
460 pr_err("BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
461
462 bus.type = MP_BUS;
463 bus.busid = 0;
464 memcpy(bus.bustype, "ISA ", 6);
465 MP_bus_info(&bus);
466
467 construct_default_ioirq_mptable(0);
468 }
469 #endif
470
471 return 0;
472 }
473
474 /*
475 * Scan the memory blocks for an SMP configuration block.
476 */
mpparse_get_smp_config(unsigned int early)477 static __init void mpparse_get_smp_config(unsigned int early)
478 {
479 struct mpf_intel *mpf;
480
481 if (!smp_found_config)
482 return;
483
484 if (!mpf_found)
485 return;
486
487 if (acpi_lapic && early)
488 return;
489
490 /*
491 * MPS doesn't support hyperthreading, aka only have
492 * thread 0 apic id in MPS table
493 */
494 if (acpi_lapic && acpi_ioapic)
495 return;
496
497 mpf = early_memremap(mpf_base, sizeof(*mpf));
498 if (!mpf) {
499 pr_err("MPTABLE: error mapping MP table\n");
500 return;
501 }
502
503 pr_info("Intel MultiProcessor Specification v1.%d\n",
504 mpf->specification);
505 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
506 if (mpf->feature2 & (1 << 7)) {
507 pr_info(" IMCR and PIC compatibility mode.\n");
508 pic_mode = 1;
509 } else {
510 pr_info(" Virtual Wire compatibility mode.\n");
511 pic_mode = 0;
512 }
513 #endif
514 /*
515 * Now see if we need to read further.
516 */
517 if (mpf->feature1) {
518 if (early) {
519 /* Local APIC has default address */
520 register_lapic_address(APIC_DEFAULT_PHYS_BASE);
521 goto out;
522 }
523
524 pr_info("Default MP configuration #%d\n", mpf->feature1);
525 construct_default_ISA_mptable(mpf->feature1);
526
527 } else if (mpf->physptr) {
528 if (check_physptr(mpf, early))
529 goto out;
530 } else
531 BUG();
532
533 if (!early && !acpi_lapic)
534 pr_info("Processors: %d\n", num_procs);
535 /*
536 * Only use the first configuration found.
537 */
538 out:
539 early_memunmap(mpf, sizeof(*mpf));
540 }
541
mpparse_parse_early_smp_config(void)542 void __init mpparse_parse_early_smp_config(void)
543 {
544 mpparse_get_smp_config(true);
545 }
546
mpparse_parse_smp_config(void)547 void __init mpparse_parse_smp_config(void)
548 {
549 mpparse_get_smp_config(false);
550 }
551
smp_reserve_memory(struct mpf_intel * mpf)552 static void __init smp_reserve_memory(struct mpf_intel *mpf)
553 {
554 memblock_reserve(mpf->physptr, get_mpc_size(mpf->physptr));
555 }
556
smp_scan_config(unsigned long base,unsigned long length)557 static int __init smp_scan_config(unsigned long base, unsigned long length)
558 {
559 unsigned int *bp;
560 struct mpf_intel *mpf;
561 int ret = 0;
562
563 apic_pr_verbose("Scan for SMP in [mem %#010lx-%#010lx]\n", base, base + length - 1);
564 BUILD_BUG_ON(sizeof(*mpf) != 16);
565
566 while (length > 0) {
567 bp = early_memremap(base, length);
568 mpf = (struct mpf_intel *)bp;
569 if ((*bp == SMP_MAGIC_IDENT) &&
570 (mpf->length == 1) &&
571 !mpf_checksum((unsigned char *)bp, 16) &&
572 ((mpf->specification == 1)
573 || (mpf->specification == 4))) {
574 #ifdef CONFIG_X86_LOCAL_APIC
575 smp_found_config = 1;
576 #endif
577 mpf_base = base;
578 mpf_found = true;
579
580 pr_info("found SMP MP-table at [mem %#010lx-%#010lx]\n",
581 base, base + sizeof(*mpf) - 1);
582
583 memblock_reserve(base, sizeof(*mpf));
584 if (mpf->physptr)
585 smp_reserve_memory(mpf);
586
587 ret = 1;
588 }
589 early_memunmap(bp, length);
590
591 if (ret)
592 break;
593
594 base += 16;
595 length -= 16;
596 }
597 return ret;
598 }
599
mpparse_find_mptable(void)600 void __init mpparse_find_mptable(void)
601 {
602 unsigned int address;
603
604 /*
605 * FIXME: Linux assumes you have 640K of base ram..
606 * this continues the error...
607 *
608 * 1) Scan the bottom 1K for a signature
609 * 2) Scan the top 1K of base RAM
610 * 3) Scan the 64K of bios
611 */
612 if (smp_scan_config(0x0, 0x400) ||
613 smp_scan_config(639 * 0x400, 0x400) ||
614 smp_scan_config(0xF0000, 0x10000))
615 return;
616 /*
617 * If it is an SMP machine we should know now, unless the
618 * configuration is in an EISA bus machine with an
619 * extended bios data area.
620 *
621 * there is a real-mode segmented pointer pointing to the
622 * 4K EBDA area at 0x40E, calculate and scan it here.
623 *
624 * NOTE! There are Linux loaders that will corrupt the EBDA
625 * area, and as such this kind of SMP config may be less
626 * trustworthy, simply because the SMP table may have been
627 * stomped on during early boot. These loaders are buggy and
628 * should be fixed.
629 *
630 * MP1.4 SPEC states to only scan first 1K of 4K EBDA.
631 */
632
633 address = get_bios_ebda();
634 if (address)
635 smp_scan_config(address, 0x400);
636 }
637
638 #ifdef CONFIG_X86_IO_APIC
639 static u8 __initdata irq_used[MAX_IRQ_SOURCES];
640
get_MP_intsrc_index(struct mpc_intsrc * m)641 static int __init get_MP_intsrc_index(struct mpc_intsrc *m)
642 {
643 int i;
644
645 if (m->irqtype != mp_INT)
646 return 0;
647
648 if (m->irqflag != (MP_IRQTRIG_LEVEL | MP_IRQPOL_ACTIVE_LOW))
649 return 0;
650
651 /* not legacy */
652
653 for (i = 0; i < mp_irq_entries; i++) {
654 if (mp_irqs[i].irqtype != mp_INT)
655 continue;
656
657 if (mp_irqs[i].irqflag != (MP_IRQTRIG_LEVEL |
658 MP_IRQPOL_ACTIVE_LOW))
659 continue;
660
661 if (mp_irqs[i].srcbus != m->srcbus)
662 continue;
663 if (mp_irqs[i].srcbusirq != m->srcbusirq)
664 continue;
665 if (irq_used[i]) {
666 /* already claimed */
667 return -2;
668 }
669 irq_used[i] = 1;
670 return i;
671 }
672
673 /* not found */
674 return -1;
675 }
676
677 #define SPARE_SLOT_NUM 20
678
679 static struct mpc_intsrc __initdata *m_spare[SPARE_SLOT_NUM];
680
check_irq_src(struct mpc_intsrc * m,int * nr_m_spare)681 static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare)
682 {
683 int i;
684
685 apic_pr_verbose("OLD ");
686 print_mp_irq_info(m);
687
688 i = get_MP_intsrc_index(m);
689 if (i > 0) {
690 memcpy(m, &mp_irqs[i], sizeof(*m));
691 apic_pr_verbose("NEW ");
692 print_mp_irq_info(&mp_irqs[i]);
693 return;
694 }
695 if (!i) {
696 /* legacy, do nothing */
697 return;
698 }
699 if (*nr_m_spare < SPARE_SLOT_NUM) {
700 /*
701 * not found (-1), or duplicated (-2) are invalid entries,
702 * we need to use the slot later
703 */
704 m_spare[*nr_m_spare] = m;
705 *nr_m_spare += 1;
706 }
707 }
708
709 static int __init
check_slot(unsigned long mpc_new_phys,unsigned long mpc_new_length,int count)710 check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count)
711 {
712 if (!mpc_new_phys || count <= mpc_new_length) {
713 WARN(1, "update_mptable: No spare slots (length: %x)\n", count);
714 return -1;
715 }
716
717 return 0;
718 }
719 #else /* CONFIG_X86_IO_APIC */
720 static
check_irq_src(struct mpc_intsrc * m,int * nr_m_spare)721 inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {}
722 #endif /* CONFIG_X86_IO_APIC */
723
replace_intsrc_all(struct mpc_table * mpc,unsigned long mpc_new_phys,unsigned long mpc_new_length)724 static int __init replace_intsrc_all(struct mpc_table *mpc,
725 unsigned long mpc_new_phys,
726 unsigned long mpc_new_length)
727 {
728 #ifdef CONFIG_X86_IO_APIC
729 int i;
730 #endif
731 int count = sizeof(*mpc);
732 int nr_m_spare = 0;
733 unsigned char *mpt = ((unsigned char *)mpc) + count;
734
735 pr_info("mpc_length %x\n", mpc->length);
736 while (count < mpc->length) {
737 switch (*mpt) {
738 case MP_PROCESSOR:
739 skip_entry(&mpt, &count, sizeof(struct mpc_cpu));
740 break;
741 case MP_BUS:
742 skip_entry(&mpt, &count, sizeof(struct mpc_bus));
743 break;
744 case MP_IOAPIC:
745 skip_entry(&mpt, &count, sizeof(struct mpc_ioapic));
746 break;
747 case MP_INTSRC:
748 check_irq_src((struct mpc_intsrc *)mpt, &nr_m_spare);
749 skip_entry(&mpt, &count, sizeof(struct mpc_intsrc));
750 break;
751 case MP_LINTSRC:
752 skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc));
753 break;
754 default:
755 /* wrong mptable */
756 smp_dump_mptable(mpc, mpt);
757 goto out;
758 }
759 }
760
761 #ifdef CONFIG_X86_IO_APIC
762 for (i = 0; i < mp_irq_entries; i++) {
763 if (irq_used[i])
764 continue;
765
766 if (mp_irqs[i].irqtype != mp_INT)
767 continue;
768
769 if (mp_irqs[i].irqflag != (MP_IRQTRIG_LEVEL |
770 MP_IRQPOL_ACTIVE_LOW))
771 continue;
772
773 if (nr_m_spare > 0) {
774 apic_pr_verbose("*NEW* found\n");
775 nr_m_spare--;
776 memcpy(m_spare[nr_m_spare], &mp_irqs[i], sizeof(mp_irqs[i]));
777 m_spare[nr_m_spare] = NULL;
778 } else {
779 struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
780 count += sizeof(struct mpc_intsrc);
781 if (check_slot(mpc_new_phys, mpc_new_length, count) < 0)
782 goto out;
783 memcpy(m, &mp_irqs[i], sizeof(*m));
784 mpc->length = count;
785 mpt += sizeof(struct mpc_intsrc);
786 }
787 print_mp_irq_info(&mp_irqs[i]);
788 }
789 #endif
790 out:
791 /* update checksum */
792 mpc->checksum = 0;
793 mpc->checksum -= mpf_checksum((unsigned char *)mpc, mpc->length);
794
795 return 0;
796 }
797
798 int enable_update_mptable;
799
update_mptable_setup(char * str)800 static int __init update_mptable_setup(char *str)
801 {
802 enable_update_mptable = 1;
803 #ifdef CONFIG_PCI
804 pci_routeirq = 1;
805 #endif
806 return 0;
807 }
808 early_param("update_mptable", update_mptable_setup);
809
810 static unsigned long __initdata mpc_new_phys;
811 static unsigned long mpc_new_length __initdata = 4096;
812
813 /* alloc_mptable or alloc_mptable=4k */
814 static int __initdata alloc_mptable;
parse_alloc_mptable_opt(char * p)815 static int __init parse_alloc_mptable_opt(char *p)
816 {
817 enable_update_mptable = 1;
818 #ifdef CONFIG_PCI
819 pci_routeirq = 1;
820 #endif
821 alloc_mptable = 1;
822 if (!p)
823 return 0;
824 mpc_new_length = memparse(p, &p);
825 return 0;
826 }
827 early_param("alloc_mptable", parse_alloc_mptable_opt);
828
e820__memblock_alloc_reserved_mpc_new(void)829 void __init e820__memblock_alloc_reserved_mpc_new(void)
830 {
831 if (enable_update_mptable && alloc_mptable)
832 mpc_new_phys = e820__memblock_alloc_reserved(mpc_new_length, 4);
833 }
834
update_mp_table(void)835 static int __init update_mp_table(void)
836 {
837 char str[16];
838 char oem[10];
839 struct mpf_intel *mpf;
840 struct mpc_table *mpc, *mpc_new;
841 unsigned long size;
842
843 if (!enable_update_mptable)
844 return 0;
845
846 if (!mpf_found)
847 return 0;
848
849 mpf = early_memremap(mpf_base, sizeof(*mpf));
850 if (!mpf) {
851 pr_err("MPTABLE: mpf early_memremap() failed\n");
852 return 0;
853 }
854
855 /*
856 * Now see if we need to go further.
857 */
858 if (mpf->feature1)
859 goto do_unmap_mpf;
860
861 if (!mpf->physptr)
862 goto do_unmap_mpf;
863
864 size = get_mpc_size(mpf->physptr);
865 mpc = early_memremap(mpf->physptr, size);
866 if (!mpc) {
867 pr_err("MPTABLE: mpc early_memremap() failed\n");
868 goto do_unmap_mpf;
869 }
870
871 if (!smp_check_mpc(mpc, oem, str))
872 goto do_unmap_mpc;
873
874 pr_info("mpf: %llx\n", (u64)mpf_base);
875 pr_info("physptr: %x\n", mpf->physptr);
876
877 if (mpc_new_phys && mpc->length > mpc_new_length) {
878 mpc_new_phys = 0;
879 pr_info("mpc_new_length is %ld, please use alloc_mptable=8k\n",
880 mpc_new_length);
881 }
882
883 if (!mpc_new_phys) {
884 unsigned char old, new;
885 /* check if we can change the position */
886 mpc->checksum = 0;
887 old = mpf_checksum((unsigned char *)mpc, mpc->length);
888 mpc->checksum = 0xff;
889 new = mpf_checksum((unsigned char *)mpc, mpc->length);
890 if (old == new) {
891 pr_info("mpc is readonly, please try alloc_mptable instead\n");
892 goto do_unmap_mpc;
893 }
894 pr_info("use in-position replacing\n");
895 } else {
896 mpc_new = early_memremap(mpc_new_phys, mpc_new_length);
897 if (!mpc_new) {
898 pr_err("MPTABLE: new mpc early_memremap() failed\n");
899 goto do_unmap_mpc;
900 }
901 mpf->physptr = mpc_new_phys;
902 memcpy(mpc_new, mpc, mpc->length);
903 early_memunmap(mpc, size);
904 mpc = mpc_new;
905 size = mpc_new_length;
906 /* check if we can modify that */
907 if (mpc_new_phys - mpf->physptr) {
908 struct mpf_intel *mpf_new;
909 /* steal 16 bytes from [0, 1k) */
910 mpf_new = early_memremap(0x400 - 16, sizeof(*mpf_new));
911 if (!mpf_new) {
912 pr_err("MPTABLE: new mpf early_memremap() failed\n");
913 goto do_unmap_mpc;
914 }
915 pr_info("mpf new: %x\n", 0x400 - 16);
916 memcpy(mpf_new, mpf, 16);
917 early_memunmap(mpf, sizeof(*mpf));
918 mpf = mpf_new;
919 mpf->physptr = mpc_new_phys;
920 }
921 mpf->checksum = 0;
922 mpf->checksum -= mpf_checksum((unsigned char *)mpf, 16);
923 pr_info("physptr new: %x\n", mpf->physptr);
924 }
925
926 /*
927 * only replace the one with mp_INT and
928 * MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
929 * already in mp_irqs , stored by ... and mp_config_acpi_gsi,
930 * may need pci=routeirq for all coverage
931 */
932 replace_intsrc_all(mpc, mpc_new_phys, mpc_new_length);
933
934 do_unmap_mpc:
935 early_memunmap(mpc, size);
936
937 do_unmap_mpf:
938 early_memunmap(mpf, sizeof(*mpf));
939
940 return 0;
941 }
942
943 late_initcall(update_mp_table);
944