xref: /linux/drivers/net/ethernet/ibm/emac/core.h (revision baab9de3)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * drivers/net/ethernet/ibm/emac/core.h
4  *
5  * Driver for PowerPC 4xx on-chip ethernet controller.
6  *
7  * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
8  *                <benh@kernel.crashing.org>
9  *
10  * Based on the arch/ppc version of the driver:
11  *
12  * Copyright (c) 2004, 2005 Zultys Technologies.
13  * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
14  *
15  * Based on original work by
16  *      Armin Kuster <akuster@mvista.com>
17  * 	Johnnie Peters <jpeters@mvista.com>
18  *      Copyright 2000, 2001 MontaVista Softare Inc.
19  */
20 #ifndef __IBM_NEWEMAC_CORE_H
21 #define __IBM_NEWEMAC_CORE_H
22 
23 #include <linux/module.h>
24 #include <linux/list.h>
25 #include <linux/kernel.h>
26 #include <linux/interrupt.h>
27 #include <linux/netdevice.h>
28 #include <linux/dma-mapping.h>
29 #include <linux/spinlock.h>
30 #include <linux/slab.h>
31 
32 #include <asm/io.h>
33 #include <asm/dcr.h>
34 
35 #include "emac.h"
36 #include "phy.h"
37 #include "zmii.h"
38 #include "rgmii.h"
39 #include "mal.h"
40 #include "tah.h"
41 #include "debug.h"
42 
43 #define NUM_TX_BUFF			CONFIG_IBM_EMAC_TXB
44 #define NUM_RX_BUFF			CONFIG_IBM_EMAC_RXB
45 
46 /* Simple sanity check */
47 #if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
48 #error Invalid number of buffer descriptors (greater than 256)
49 #endif
50 
51 #define EMAC_MIN_MTU			46
52 
53 /* Maximum L2 header length (VLAN tagged, no FCS) */
54 #define EMAC_MTU_OVERHEAD		(6 * 2 + 2 + 4)
55 
56 /* RX BD size for the given MTU */
emac_rx_size(int mtu)57 static inline int emac_rx_size(int mtu)
58 {
59 	if (mtu > ETH_DATA_LEN)
60 		return MAL_MAX_RX_SIZE;
61 	else
62 		return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
63 }
64 
65 /* Size of RX skb for the given MTU */
emac_rx_skb_size(int mtu)66 static inline int emac_rx_skb_size(int mtu)
67 {
68 	int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
69 
70 	return SKB_DATA_ALIGN(size + NET_IP_ALIGN) + NET_SKB_PAD;
71 }
72 
73 /* RX DMA sync size */
emac_rx_sync_size(int mtu)74 static inline int emac_rx_sync_size(int mtu)
75 {
76 	return SKB_DATA_ALIGN(emac_rx_size(mtu) + NET_IP_ALIGN);
77 }
78 
79 /* Driver statistcs is split into two parts to make it more cache friendly:
80  *   - normal statistics (packet count, etc)
81  *   - error statistics
82  *
83  * When statistics is requested by ethtool, these parts are concatenated,
84  * normal one goes first.
85  *
86  * Please, keep these structures in sync with emac_stats_keys.
87  */
88 
89 /* Normal TX/RX Statistics */
90 struct emac_stats {
91 	u64 rx_packets;
92 	u64 rx_bytes;
93 	u64 tx_packets;
94 	u64 tx_bytes;
95 	u64 rx_packets_csum;
96 	u64 tx_packets_csum;
97 };
98 
99 /* Error statistics */
100 struct emac_error_stats {
101 	u64 tx_undo;
102 
103 	/* Software RX Errors */
104 	u64 rx_dropped_stack;
105 	u64 rx_dropped_oom;
106 	u64 rx_dropped_error;
107 	u64 rx_dropped_resize;
108 	u64 rx_dropped_mtu;
109 	u64 rx_stopped;
110 	/* BD reported RX errors */
111 	u64 rx_bd_errors;
112 	u64 rx_bd_overrun;
113 	u64 rx_bd_bad_packet;
114 	u64 rx_bd_runt_packet;
115 	u64 rx_bd_short_event;
116 	u64 rx_bd_alignment_error;
117 	u64 rx_bd_bad_fcs;
118 	u64 rx_bd_packet_too_long;
119 	u64 rx_bd_out_of_range;
120 	u64 rx_bd_in_range;
121 	/* EMAC IRQ reported RX errors */
122 	u64 rx_parity;
123 	u64 rx_fifo_overrun;
124 	u64 rx_overrun;
125 	u64 rx_bad_packet;
126 	u64 rx_runt_packet;
127 	u64 rx_short_event;
128 	u64 rx_alignment_error;
129 	u64 rx_bad_fcs;
130 	u64 rx_packet_too_long;
131 	u64 rx_out_of_range;
132 	u64 rx_in_range;
133 
134 	/* Software TX Errors */
135 	u64 tx_dropped;
136 	/* BD reported TX errors */
137 	u64 tx_bd_errors;
138 	u64 tx_bd_bad_fcs;
139 	u64 tx_bd_carrier_loss;
140 	u64 tx_bd_excessive_deferral;
141 	u64 tx_bd_excessive_collisions;
142 	u64 tx_bd_late_collision;
143 	u64 tx_bd_multple_collisions;
144 	u64 tx_bd_single_collision;
145 	u64 tx_bd_underrun;
146 	u64 tx_bd_sqe;
147 	/* EMAC IRQ reported TX errors */
148 	u64 tx_parity;
149 	u64 tx_underrun;
150 	u64 tx_sqe;
151 	u64 tx_errors;
152 };
153 
154 #define EMAC_ETHTOOL_STATS_COUNT	((sizeof(struct emac_stats) + \
155 					  sizeof(struct emac_error_stats)) \
156 					 / sizeof(u64))
157 
158 struct emac_instance {
159 	struct net_device		*ndev;
160 	struct emac_regs		__iomem *emacp;
161 	struct platform_device		*ofdev;
162 	struct device_node		**blist; /* bootlist entry */
163 
164 	/* MAL linkage */
165 	u32				mal_ph;
166 	struct platform_device		*mal_dev;
167 	u32				mal_rx_chan;
168 	u32				mal_tx_chan;
169 	struct mal_instance		*mal;
170 	struct mal_commac		commac;
171 
172 	/* PHY infos */
173 	phy_interface_t			phy_mode;
174 	u32				phy_map;
175 	u32				phy_address;
176 	u32				phy_feat_exc;
177 	struct mii_phy			phy;
178 	struct mutex			link_lock;
179 	struct delayed_work		link_work;
180 	int				link_polling;
181 
182 	/* GPCS PHY infos */
183 	u32				gpcs_address;
184 
185 	/* Shared MDIO if any */
186 	u32				mdio_ph;
187 	struct platform_device		*mdio_dev;
188 	struct emac_instance		*mdio_instance;
189 	struct mutex			mdio_lock;
190 
191 	/* ZMII infos if any */
192 	u32				zmii_ph;
193 	u32				zmii_port;
194 	struct platform_device		*zmii_dev;
195 
196 	/* RGMII infos if any */
197 	u32				rgmii_ph;
198 	u32				rgmii_port;
199 	struct platform_device		*rgmii_dev;
200 
201 	/* TAH infos if any */
202 	u32				tah_ph;
203 	u32				tah_port;
204 	struct platform_device		*tah_dev;
205 
206 	/* IRQs */
207 	int				wol_irq;
208 	int				emac_irq;
209 
210 	/* OPB bus frequency in Mhz */
211 	u32				opb_bus_freq;
212 
213 	/* Cell index within an ASIC (for clk mgmnt) */
214 	u32				cell_index;
215 
216 	/* Max supported MTU */
217 	u32				max_mtu;
218 
219 	/* Feature bits (from probe table) */
220 	unsigned int			features;
221 
222 	/* Tx and Rx fifo sizes & other infos in bytes */
223 	u32				tx_fifo_size;
224 	u32				tx_fifo_size_gige;
225 	u32				rx_fifo_size;
226 	u32				rx_fifo_size_gige;
227 	u32				fifo_entry_size;
228 	u32				mal_burst_size; /* move to MAL ? */
229 
230 	/* IAHT and GAHT filter parameterization */
231 	u32				xaht_slots_shift;
232 	u32				xaht_width_shift;
233 
234 	/* Descriptor management
235 	 */
236 	struct mal_descriptor		*tx_desc;
237 	int				tx_cnt;
238 	int				tx_slot;
239 	int				ack_slot;
240 
241 	struct mal_descriptor		*rx_desc;
242 	int				rx_slot;
243 	struct sk_buff			*rx_sg_skb;	/* 1 */
244 	int 				rx_skb_size;
245 	int				rx_sync_size;
246 
247 	struct sk_buff			*tx_skb[NUM_TX_BUFF];
248 	struct sk_buff			*rx_skb[NUM_RX_BUFF];
249 
250 	/* Stats
251 	 */
252 	struct emac_error_stats		estats;
253 	struct emac_stats 		stats;
254 
255 	/* Misc
256 	 */
257 	int				reset_failed;
258 	int				stop_timeout;	/* in us */
259 	int				no_mcast;
260 	int				mcast_pending;
261 	int				opened;
262 	struct work_struct		reset_work;
263 	spinlock_t			lock;
264 };
265 
266 /*
267  * Features of various EMAC implementations
268  */
269 
270 /*
271  * No flow control on 40x according to the original driver
272  */
273 #define EMAC_FTR_NO_FLOW_CONTROL_40x	0x00000001
274 /*
275  * Cell is an EMAC4
276  */
277 #define EMAC_FTR_EMAC4			0x00000002
278 /*
279  * For the 440SPe, AMCC inexplicably changed the polarity of
280  * the "operation complete" bit in the MII control register.
281  */
282 #define EMAC_FTR_STACR_OC_INVERT	0x00000004
283 /*
284  * Set if we have a TAH.
285  */
286 #define EMAC_FTR_HAS_TAH		0x00000008
287 /*
288  * Set if we have a ZMII.
289  */
290 #define EMAC_FTR_HAS_ZMII		0x00000010
291 /*
292  * Set if we have a RGMII.
293  */
294 #define EMAC_FTR_HAS_RGMII		0x00000020
295 /*
296  * Set if we have new type STACR with STAOPC
297  */
298 #define EMAC_FTR_HAS_NEW_STACR		0x00000040
299 /*
300  * Set if we need phy clock workaround for 440gx
301  */
302 #define EMAC_FTR_440GX_PHY_CLK_FIX	0x00000080
303 /*
304  * Set if we need phy clock workaround for 440ep or 440gr
305  */
306 #define EMAC_FTR_440EP_PHY_CLK_FIX	0x00000100
307 /*
308  * The 405EX and 460EX contain the EMAC4SYNC core
309  */
310 #define EMAC_FTR_EMAC4SYNC		0x00000200
311 /*
312  * Set if we need phy clock workaround for 460ex or 460gt
313  */
314 #define EMAC_FTR_460EX_PHY_CLK_FIX	0x00000400
315 /*
316  * APM821xx requires Jumbo frame size set explicitly
317  */
318 #define EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE	0x00000800
319 /*
320  * APM821xx does not support Half Duplex mode
321  */
322 #define EMAC_FTR_APM821XX_NO_HALF_DUPLEX	0x00001000
323 
324 /* Right now, we don't quite handle the always/possible masks on the
325  * most optimal way as we don't have a way to say something like
326  * always EMAC4. Patches welcome.
327  */
328 enum {
329 	EMAC_FTRS_ALWAYS	= 0,
330 
331 	EMAC_FTRS_POSSIBLE	=
332 #ifdef CONFIG_IBM_EMAC_EMAC4
333 	    EMAC_FTR_EMAC4	| EMAC_FTR_EMAC4SYNC	|
334 	    EMAC_FTR_HAS_NEW_STACR	|
335 	    EMAC_FTR_STACR_OC_INVERT | EMAC_FTR_440GX_PHY_CLK_FIX |
336 #endif
337 #ifdef CONFIG_IBM_EMAC_TAH
338 	    EMAC_FTR_HAS_TAH	|
339 #endif
340 #ifdef CONFIG_IBM_EMAC_ZMII
341 	    EMAC_FTR_HAS_ZMII	|
342 #endif
343 #ifdef CONFIG_IBM_EMAC_RGMII
344 	    EMAC_FTR_HAS_RGMII	|
345 #endif
346 #ifdef CONFIG_IBM_EMAC_NO_FLOW_CTRL
347 	    EMAC_FTR_NO_FLOW_CONTROL_40x |
348 #endif
349 	EMAC_FTR_460EX_PHY_CLK_FIX |
350 	EMAC_FTR_440EP_PHY_CLK_FIX |
351 	EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE |
352 	EMAC_FTR_APM821XX_NO_HALF_DUPLEX,
353 };
354 
emac_has_feature(struct emac_instance * dev,unsigned long feature)355 static inline int emac_has_feature(struct emac_instance *dev,
356 				   unsigned long feature)
357 {
358 	return (EMAC_FTRS_ALWAYS & feature) ||
359 	       (EMAC_FTRS_POSSIBLE & dev->features & feature);
360 }
361 
362 /*
363  * Various instances of the EMAC core have varying 1) number of
364  * address match slots, 2) width of the registers for handling address
365  * match slots, 3) number of registers for handling address match
366  * slots and 4) base offset for those registers.
367  *
368  * These macros and inlines handle these differences based on
369  * parameters supplied by the device structure which are, in turn,
370  * initialized based on the "compatible" entry in the device tree.
371  */
372 
373 #define	EMAC4_XAHT_SLOTS_SHIFT		6
374 #define	EMAC4_XAHT_WIDTH_SHIFT		4
375 
376 #define	EMAC4SYNC_XAHT_SLOTS_SHIFT	8
377 #define	EMAC4SYNC_XAHT_WIDTH_SHIFT	5
378 
379 /* The largest span between slots and widths above is 3 */
380 #define	EMAC_XAHT_MAX_REGS		(1 << 3)
381 
382 #define	EMAC_XAHT_SLOTS(dev)         	(1 << (dev)->xaht_slots_shift)
383 #define	EMAC_XAHT_WIDTH(dev)         	(1 << (dev)->xaht_width_shift)
384 #define	EMAC_XAHT_REGS(dev)          	(1 << ((dev)->xaht_slots_shift - \
385 					       (dev)->xaht_width_shift))
386 
387 #define	EMAC_XAHT_CRC_TO_SLOT(dev, crc)			\
388 	((EMAC_XAHT_SLOTS(dev) - 1) -			\
389 	 ((crc) >> ((sizeof (u32) * BITS_PER_BYTE) -	\
390 		    (dev)->xaht_slots_shift)))
391 
392 #define	EMAC_XAHT_SLOT_TO_REG(dev, slot)		\
393 	((slot) >> (dev)->xaht_width_shift)
394 
395 #define	EMAC_XAHT_SLOT_TO_MASK(dev, slot)		\
396 	((u32)(1 << (EMAC_XAHT_WIDTH(dev) - 1)) >>	\
397 	 ((slot) & (u32)(EMAC_XAHT_WIDTH(dev) - 1)))
398 
emac_xaht_base(struct emac_instance * dev)399 static inline u32 __iomem *emac_xaht_base(struct emac_instance *dev)
400 {
401 	struct emac_regs __iomem *p = dev->emacp;
402 	int offset;
403 
404 	/* The first IAHT entry always is the base of the block of
405 	 * IAHT and GAHT registers.
406 	 */
407 	if (emac_has_feature(dev, EMAC_FTR_EMAC4SYNC))
408 		offset = offsetof(struct emac_regs, u1.emac4sync.iaht1);
409 	else
410 		offset = offsetof(struct emac_regs, u0.emac4.iaht1);
411 
412 	return (u32 __iomem *)((__force ptrdiff_t)p + offset);
413 }
414 
emac_gaht_base(struct emac_instance * dev)415 static inline u32 __iomem *emac_gaht_base(struct emac_instance *dev)
416 {
417 	/* GAHT registers always come after an identical number of
418 	 * IAHT registers.
419 	 */
420 	return emac_xaht_base(dev) + EMAC_XAHT_REGS(dev);
421 }
422 
emac_iaht_base(struct emac_instance * dev)423 static inline u32 *emac_iaht_base(struct emac_instance *dev)
424 {
425 	/* IAHT registers always come before an identical number of
426 	 * GAHT registers.
427 	 */
428 	return emac_xaht_base(dev);
429 }
430 
431 /* Ethtool get_regs complex data.
432  * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH
433  * when available.
434  *
435  * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr,
436  * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
437  * Each register component is preceded with emac_ethtool_regs_subhdr.
438  * Order of the optional headers follows their relative bit posititions
439  * in emac_ethtool_regs_hdr.components
440  */
441 #define EMAC_ETHTOOL_REGS_ZMII		0x00000001
442 #define EMAC_ETHTOOL_REGS_RGMII		0x00000002
443 #define EMAC_ETHTOOL_REGS_TAH		0x00000004
444 
445 struct emac_ethtool_regs_hdr {
446 	u32 components;
447 };
448 
449 struct emac_ethtool_regs_subhdr {
450 	u32 version;
451 	u32 index;
452 };
453 
454 #define EMAC_ETHTOOL_REGS_VER		3
455 #define EMAC4_ETHTOOL_REGS_VER		4
456 #define EMAC4SYNC_ETHTOOL_REGS_VER	5
457 
458 #endif /* __IBM_NEWEMAC_CORE_H */
459