1 /* tc-msp430.c -- Assembler code for the Texas Instruments MSP430
2
3 Copyright (C) 2002-2020 Free Software Foundation, Inc.
4 Contributed by Dmitry Diky <diwil@mail.ru>
5
6 This file is part of GAS, the GNU Assembler.
7
8 GAS is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 3, or (at your option)
11 any later version.
12
13 GAS is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
17
18 You should have received a copy of the GNU General Public License
19 along with GAS; see the file COPYING. If not, write to
20 the Free Software Foundation, 51 Franklin Street - Fifth Floor,
21 Boston, MA 02110-1301, USA. */
22
23 #include "as.h"
24 #include <limits.h>
25 #include "subsegs.h"
26 #include "opcode/msp430.h"
27 #include "safe-ctype.h"
28 #include "dwarf2dbg.h"
29 #include "elf/msp430.h"
30 #include "libiberty.h"
31
32 /* We will disable polymorphs by default because it is dangerous.
33 The potential problem here is the following: assume we got the
34 following code:
35
36 jump .l1
37 nop
38 jump subroutine ; external symbol
39 .l1:
40 nop
41 ret
42
43 In case of assembly time relaxation we'll get:
44 0: jmp .l1 <.text +0x08> (reloc deleted)
45 2: nop
46 4: br subroutine
47 .l1:
48 8: nop
49 10: ret
50
51 If the 'subroutine' is within +-1024 bytes range then linker
52 will produce:
53 0: jmp .text +0x08
54 2: nop
55 4: jmp subroutine
56 .l1:
57 6: nop
58 8: ret ; 'jmp .text +0x08' will land here. WRONG!!!
59
60 The workaround is the following:
61 1. Declare global var enable_polymorphs which set to 1 via option -mp.
62 2. Declare global var enable_relax which set to 1 via option -mQ.
63
64 If polymorphs are enabled, and relax isn't, treat all jumps as long jumps,
65 do not delete any relocs and leave them for linker.
66
67 If relax is enabled, relax at assembly time and kill relocs as necessary. */
68
69 int msp430_enable_relax;
70 int msp430_enable_polys;
71
72 /* GCC uses the some condition codes which we'll
73 implement as new polymorph instructions.
74
75 COND EXPL SHORT JUMP LONG JUMP
76 ===============================================
77 eq == jeq jne +4; br lab
78 ne != jne jeq +4; br lab
79
80 ltn honours no-overflow flag
81 ltn < jn jn +2; jmp +4; br lab
82
83 lt < jl jge +4; br lab
84 ltu < jlo lhs +4; br lab
85 le <= see below
86 leu <= see below
87
88 gt > see below
89 gtu > see below
90 ge >= jge jl +4; br lab
91 geu >= jhs jlo +4; br lab
92 ===============================================
93
94 Therefore, new opcodes are (BranchEQ -> beq; and so on...)
95 beq,bne,blt,bltn,bltu,bge,bgeu
96 'u' means unsigned compares
97
98 Also, we add 'jump' instruction:
99 jump UNCOND -> jmp br lab
100
101 They will have fmt == 4, and insn_opnumb == number of instruction. */
102
103 struct rcodes_s
104 {
105 const char * name;
106 int index; /* Corresponding insn_opnumb. */
107 int sop; /* Opcode if jump length is short. */
108 long lpos; /* Label position. */
109 long lop0; /* Opcode 1 _word_ (16 bits). */
110 long lop1; /* Opcode second word. */
111 long lop2; /* Opcode third word. */
112 };
113
114 #define MSP430_RLC(n,i,sop,o1) \
115 {#n, i, sop, 2, (o1 + 2), 0x4010, 0}
116
117 static struct rcodes_s msp430_rcodes[] =
118 {
119 MSP430_RLC (beq, 0, 0x2400, 0x2000),
120 MSP430_RLC (bne, 1, 0x2000, 0x2400),
121 MSP430_RLC (blt, 2, 0x3800, 0x3400),
122 MSP430_RLC (bltu, 3, 0x2800, 0x2c00),
123 MSP430_RLC (bge, 4, 0x3400, 0x3800),
124 MSP430_RLC (bgeu, 5, 0x2c00, 0x2800),
125 {"bltn", 6, 0x3000, 3, 0x3000 + 1, 0x3c00 + 2,0x4010},
126 {"jump", 7, 0x3c00, 1, 0x4010, 0, 0},
127 {0,0,0,0,0,0,0}
128 };
129
130 #undef MSP430_RLC
131 #define MSP430_RLC(n,i,sop,o1) \
132 {#n, i, sop, 2, (o1 + 2), 0x0030, 0}
133
134 static struct rcodes_s msp430x_rcodes[] =
135 {
136 MSP430_RLC (beq, 0, 0x2400, 0x2000),
137 MSP430_RLC (bne, 1, 0x2000, 0x2400),
138 MSP430_RLC (blt, 2, 0x3800, 0x3400),
139 MSP430_RLC (bltu, 3, 0x2800, 0x2c00),
140 MSP430_RLC (bge, 4, 0x3400, 0x3800),
141 MSP430_RLC (bgeu, 5, 0x2c00, 0x2800),
142 {"bltn", 6, 0x3000, 3, 0x0030 + 1, 0x3c00 + 2, 0x3000},
143 {"jump", 7, 0x3c00, 1, 0x0030, 0, 0},
144 {0,0,0,0,0,0,0}
145 };
146 #undef MSP430_RLC
147
148 /* More difficult than above and they have format 5.
149
150 COND EXPL SHORT LONG
151 =================================================================
152 gt > jeq +2; jge label jeq +6; jl +4; br label
153 gtu > jeq +2; jhs label jeq +6; jlo +4; br label
154 leu <= jeq label; jlo label jeq +2; jhs +4; br label
155 le <= jeq label; jl label jeq +2; jge +4; br label
156 ================================================================= */
157
158 struct hcodes_s
159 {
160 const char * name;
161 int index; /* Corresponding insn_opnumb. */
162 int tlab; /* Number of labels in short mode. */
163 int op0; /* Opcode for first word of short jump. */
164 int op1; /* Opcode for second word of short jump. */
165 int lop0; /* Opcodes for long jump mode. */
166 int lop1;
167 int lop2;
168 };
169
170 static struct hcodes_s msp430_hcodes[] =
171 {
172 {"bgt", 0, 1, 0x2401, 0x3400, 0x2403, 0x3802, 0x4010 },
173 {"bgtu", 1, 1, 0x2401, 0x2c00, 0x2403, 0x2802, 0x4010 },
174 {"bleu", 2, 2, 0x2400, 0x2800, 0x2401, 0x2c02, 0x4010 },
175 {"ble", 3, 2, 0x2400, 0x3800, 0x2401, 0x3402, 0x4010 },
176 {0,0,0,0,0,0,0,0}
177 };
178
179 static struct hcodes_s msp430x_hcodes[] =
180 {
181 {"bgt", 0, 1, 0x2401, 0x3400, 0x2403, 0x3802, 0x0030 },
182 {"bgtu", 1, 1, 0x2401, 0x2c00, 0x2403, 0x2802, 0x0030 },
183 {"bleu", 2, 2, 0x2400, 0x2800, 0x2401, 0x2c02, 0x0030 },
184 {"ble", 3, 2, 0x2400, 0x3800, 0x2401, 0x3402, 0x0030 },
185 {0,0,0,0,0,0,0,0}
186 };
187
188 const char comment_chars[] = ";";
189 const char line_comment_chars[] = "#";
190 const char line_separator_chars[] = "{";
191 const char EXP_CHARS[] = "eE";
192 const char FLT_CHARS[] = "dD";
193
194 /* Handle long expressions. */
195 extern LITTLENUM_TYPE generic_bignum[];
196
197 static htab_t msp430_hash;
198
199 /* Relaxations. */
200 #define STATE_UNCOND_BRANCH 1 /* jump */
201 #define STATE_NOOV_BRANCH 3 /* bltn */
202 #define STATE_SIMPLE_BRANCH 2 /* bne, beq, etc... */
203 #define STATE_EMUL_BRANCH 4
204
205 #define CNRL 2
206 #define CUBL 4
207 #define CNOL 8
208 #define CSBL 6
209 #define CEBL 4
210
211 /* Length. */
212 #define STATE_BITS10 1 /* Wild guess. short jump. */
213 #define STATE_WORD 2 /* 2 bytes pc rel. addr. more. */
214 #define STATE_UNDEF 3 /* Cannot handle this yet. convert to word mode. */
215
216 #define ENCODE_RELAX(what,length) (((what) << 2) + (length))
217 #define RELAX_STATE(s) ((s) & 3)
218 #define RELAX_LEN(s) ((s) >> 2)
219 #define RELAX_NEXT(a,b) ENCODE_RELAX (a, b + 1)
220
221 relax_typeS md_relax_table[] =
222 {
223 /* Unused. */
224 {1, 1, 0, 0},
225 {1, 1, 0, 0},
226 {1, 1, 0, 0},
227 {1, 1, 0, 0},
228
229 /* Unconditional jump. */
230 {1, 1, 8, 5},
231 {1024, -1024, CNRL, RELAX_NEXT (STATE_UNCOND_BRANCH, STATE_BITS10)}, /* state 10 bits displ */
232 {0, 0, CUBL, RELAX_NEXT (STATE_UNCOND_BRANCH, STATE_WORD)}, /* state word */
233 {1, 1, CUBL, 0}, /* state undef */
234
235 /* Simple branches. */
236 {0, 0, 8, 9},
237 {1024, -1024, CNRL, RELAX_NEXT (STATE_SIMPLE_BRANCH, STATE_BITS10)}, /* state 10 bits displ */
238 {0, 0, CSBL, RELAX_NEXT (STATE_SIMPLE_BRANCH, STATE_WORD)}, /* state word */
239 {1, 1, CSBL, 0},
240
241 /* blt no overflow branch. */
242 {1, 1, 8, 13},
243 {1024, -1024, CNRL, RELAX_NEXT (STATE_NOOV_BRANCH, STATE_BITS10)}, /* state 10 bits displ */
244 {0, 0, CNOL, RELAX_NEXT (STATE_NOOV_BRANCH, STATE_WORD)}, /* state word */
245 {1, 1, CNOL, 0},
246
247 /* Emulated branches. */
248 {1, 1, 8, 17},
249 {1020, -1020, CEBL, RELAX_NEXT (STATE_EMUL_BRANCH, STATE_BITS10)}, /* state 10 bits displ */
250 {0, 0, CNOL, RELAX_NEXT (STATE_EMUL_BRANCH, STATE_WORD)}, /* state word */
251 {1, 1, CNOL, 0}
252 };
253
254
255 #define MAX_OP_LEN 4096
256
257 typedef enum msp_isa
258 {
259 MSP_ISA_430,
260 MSP_ISA_430X,
261 MSP_ISA_430Xv2
262 } msp_isa;
263
264 static enum msp_isa selected_isa = MSP_ISA_430Xv2;
265
266 static inline bfd_boolean
target_is_430x(void)267 target_is_430x (void)
268 {
269 return selected_isa >= MSP_ISA_430X;
270 }
271
272 static inline bfd_boolean
target_is_430xv2(void)273 target_is_430xv2 (void)
274 {
275 return selected_isa == MSP_ISA_430Xv2;
276 }
277
278 /* Generate an absolute 16-bit relocation, for 430 (!extended_op) instructions
279 only.
280 For the 430X we generate a 430 relocation only for the case where part of an
281 expression is being extracted (e.g. #hi(EXP), #lo(EXP). Otherwise generate
282 a 430X relocation.
283 For the 430 we generate a relocation without assembler range checking
284 if we are handling an immediate value or a byte-width instruction. */
285
286 #undef CHECK_RELOC_MSP430
287 #define CHECK_RELOC_MSP430(OP) \
288 (target_is_430x () \
289 ? ((OP).expp == MSP_EXPP_ALL \
290 ? BFD_RELOC_MSP430X_ABS16 \
291 : ((OP).vshift == 1 \
292 ? BFD_RELOC_MSP430_ABS_HI16 : BFD_RELOC_16)) \
293 : ((imm_op || byte_op) \
294 ? BFD_RELOC_MSP430_16_BYTE : BFD_RELOC_MSP430_16))
295
296 /* Generate a 16-bit pc-relative relocation.
297 For the 430X we generate a relocation without linker range checking.
298 For the 430 we generate a relocation without assembler range checking
299 if we are handling an immediate value or a byte-width instruction. */
300 #undef CHECK_RELOC_MSP430_PCREL
301 #define CHECK_RELOC_MSP430_PCREL \
302 (target_is_430x () \
303 ? BFD_RELOC_MSP430X_PCR16 \
304 : (imm_op || byte_op) \
305 ? BFD_RELOC_MSP430_16_PCREL_BYTE : BFD_RELOC_MSP430_16_PCREL)
306
307 /* Profiling capability:
308 It is a performance hit to use gcc's profiling approach for this tiny target.
309 Even more -- jtag hardware facility does not perform any profiling functions.
310 However we've got gdb's built-in simulator where we can do anything.
311 Therefore my suggestion is:
312
313 We define new section ".profiler" which holds all profiling information.
314 We define new pseudo operation .profiler which will instruct assembler to
315 add new profile entry to the object file. Profile should take place at the
316 present address.
317
318 Pseudo-op format:
319
320 .profiler flags,function_to_profile [, cycle_corrector, extra]
321
322 where 'flags' is a combination of the following chars:
323 s - function Start
324 x - function eXit
325 i - function is in Init section
326 f - function is in Fini section
327 l - Library call
328 c - libC standard call
329 d - stack value Demand (saved at run-time in simulator)
330 I - Interrupt service routine
331 P - Prologue start
332 p - Prologue end
333 E - Epilogue start
334 e - Epilogue end
335 j - long Jump/ sjlj unwind
336 a - an Arbitrary code fragment
337 t - exTra parameter saved (constant value like frame size)
338 '""' optional: "sil" == sil
339
340 function_to_profile - function's address
341 cycle_corrector - a value which should be added to the cycle
342 counter, zero if omitted
343 extra - some extra parameter, zero if omitted.
344
345 For example:
346 ------------------------------
347 .global fxx
348 .type fxx,@function
349 fxx:
350 .LFrameOffset_fxx=0x08
351 .profiler "scdP", fxx ; function entry.
352 ; we also demand stack value to be displayed
353 push r11
354 push r10
355 push r9
356 push r8
357 .profiler "cdp",fxx,0, .LFrameOffset_fxx ; check stack value at this point
358 ; (this is a prologue end)
359 ; note, that spare var filled with the frame size
360 mov r15,r8
361 ....
362 .profiler cdE,fxx ; check stack
363 pop r8
364 pop r9
365 pop r10
366 pop r11
367 .profiler xcde,fxx,3 ; exit adds 3 to the cycle counter
368 ret ; cause 'ret' insn takes 3 cycles
369 -------------------------------
370
371 This profiling approach does not produce any overhead and
372 absolutely harmless.
373 So, even profiled code can be uploaded to the MCU. */
374 #define MSP430_PROFILER_FLAG_ENTRY 1 /* s */
375 #define MSP430_PROFILER_FLAG_EXIT 2 /* x */
376 #define MSP430_PROFILER_FLAG_INITSECT 4 /* i */
377 #define MSP430_PROFILER_FLAG_FINISECT 8 /* f */
378 #define MSP430_PROFILER_FLAG_LIBCALL 0x10 /* l */
379 #define MSP430_PROFILER_FLAG_STDCALL 0x20 /* c */
380 #define MSP430_PROFILER_FLAG_STACKDMD 0x40 /* d */
381 #define MSP430_PROFILER_FLAG_ISR 0x80 /* I */
382 #define MSP430_PROFILER_FLAG_PROLSTART 0x100 /* P */
383 #define MSP430_PROFILER_FLAG_PROLEND 0x200 /* p */
384 #define MSP430_PROFILER_FLAG_EPISTART 0x400 /* E */
385 #define MSP430_PROFILER_FLAG_EPIEND 0x800 /* e */
386 #define MSP430_PROFILER_FLAG_JUMP 0x1000 /* j */
387 #define MSP430_PROFILER_FLAG_FRAGMENT 0x2000 /* a */
388 #define MSP430_PROFILER_FLAG_EXTRA 0x4000 /* t */
389 #define MSP430_PROFILER_FLAG_notyet 0x8000 /* ? */
390
391 static int
pow2value(int y)392 pow2value (int y)
393 {
394 int n = 0;
395 unsigned int x;
396
397 x = y;
398
399 if (!x)
400 return 1;
401
402 for (; x; x = x >> 1)
403 if (x & 1)
404 n++;
405
406 return n == 1;
407 }
408
409 /* Parse ordinary expression. */
410
411 static char *
parse_exp(char * s,expressionS * op)412 parse_exp (char * s, expressionS * op)
413 {
414 input_line_pointer = s;
415 expression (op);
416 if (op->X_op == O_absent)
417 as_bad (_("missing operand"));
418
419 /* Our caller is likely to check that the entire expression was parsed.
420 If we have found a hex constant with an 'h' suffix, ilp will be left
421 pointing at the 'h', so skip it here. */
422 if (input_line_pointer != NULL
423 && op->X_op == O_constant
424 && (*input_line_pointer == 'h' || *input_line_pointer == 'H'))
425 ++ input_line_pointer;
426 return input_line_pointer;
427 }
428
429
430 /* Delete spaces from s: X ( r 1 2) => X(r12). */
431
432 static void
del_spaces(char * s)433 del_spaces (char * s)
434 {
435 while (*s)
436 {
437 if (ISSPACE (*s))
438 {
439 char *m = s + 1;
440
441 while (ISSPACE (*m) && *m)
442 m++;
443 memmove (s, m, strlen (m) + 1);
444 }
445 else
446 s++;
447 }
448 }
449
450 static inline char *
skip_space(char * s)451 skip_space (char * s)
452 {
453 while (ISSPACE (*s))
454 ++s;
455 return s;
456 }
457
458 /* Extract one word from FROM and copy it to TO. Delimiters are ",;\n" */
459
460 static char *
extract_operand(char * from,char * to,int limit)461 extract_operand (char * from, char * to, int limit)
462 {
463 int size = 0;
464
465 /* Drop leading whitespace. */
466 from = skip_space (from);
467
468 while (size < limit && *from)
469 {
470 *(to + size) = *from;
471 if (*from == ',' || *from == ';' || *from == '\n')
472 break;
473 from++;
474 size++;
475 }
476
477 *(to + size) = 0;
478 del_spaces (to);
479
480 from++;
481
482 return from;
483 }
484
485 static void
msp430_profiler(int dummy ATTRIBUTE_UNUSED)486 msp430_profiler (int dummy ATTRIBUTE_UNUSED)
487 {
488 char buffer[1024];
489 char f[32];
490 char * str = buffer;
491 char * flags = f;
492 int p_flags = 0;
493 char * halt;
494 int ops = 0;
495 int left;
496 char * s;
497 segT seg;
498 int subseg;
499 char * end = 0;
500 expressionS exp;
501 expressionS exp1;
502
503 s = input_line_pointer;
504 end = input_line_pointer;
505
506 while (*end && *end != '\n')
507 end++;
508
509 while (*s && *s != '\n')
510 {
511 if (*s == ',')
512 ops++;
513 s++;
514 }
515
516 left = 3 - ops;
517
518 if (ops < 1)
519 {
520 as_bad (_(".profiler pseudo requires at least two operands."));
521 input_line_pointer = end;
522 return;
523 }
524
525 input_line_pointer = extract_operand (input_line_pointer, flags, 32);
526
527 while (*flags)
528 {
529 switch (*flags)
530 {
531 case '"':
532 break;
533 case 'a':
534 p_flags |= MSP430_PROFILER_FLAG_FRAGMENT;
535 break;
536 case 'j':
537 p_flags |= MSP430_PROFILER_FLAG_JUMP;
538 break;
539 case 'P':
540 p_flags |= MSP430_PROFILER_FLAG_PROLSTART;
541 break;
542 case 'p':
543 p_flags |= MSP430_PROFILER_FLAG_PROLEND;
544 break;
545 case 'E':
546 p_flags |= MSP430_PROFILER_FLAG_EPISTART;
547 break;
548 case 'e':
549 p_flags |= MSP430_PROFILER_FLAG_EPIEND;
550 break;
551 case 's':
552 p_flags |= MSP430_PROFILER_FLAG_ENTRY;
553 break;
554 case 'x':
555 p_flags |= MSP430_PROFILER_FLAG_EXIT;
556 break;
557 case 'i':
558 p_flags |= MSP430_PROFILER_FLAG_INITSECT;
559 break;
560 case 'f':
561 p_flags |= MSP430_PROFILER_FLAG_FINISECT;
562 break;
563 case 'l':
564 p_flags |= MSP430_PROFILER_FLAG_LIBCALL;
565 break;
566 case 'c':
567 p_flags |= MSP430_PROFILER_FLAG_STDCALL;
568 break;
569 case 'd':
570 p_flags |= MSP430_PROFILER_FLAG_STACKDMD;
571 break;
572 case 'I':
573 p_flags |= MSP430_PROFILER_FLAG_ISR;
574 break;
575 case 't':
576 p_flags |= MSP430_PROFILER_FLAG_EXTRA;
577 break;
578 default:
579 as_warn (_("unknown profiling flag - ignored."));
580 break;
581 }
582 flags++;
583 }
584
585 if (p_flags
586 && ( ! pow2value (p_flags & ( MSP430_PROFILER_FLAG_ENTRY
587 | MSP430_PROFILER_FLAG_EXIT))
588 || ! pow2value (p_flags & ( MSP430_PROFILER_FLAG_PROLSTART
589 | MSP430_PROFILER_FLAG_PROLEND
590 | MSP430_PROFILER_FLAG_EPISTART
591 | MSP430_PROFILER_FLAG_EPIEND))
592 || ! pow2value (p_flags & ( MSP430_PROFILER_FLAG_INITSECT
593 | MSP430_PROFILER_FLAG_FINISECT))))
594 {
595 as_bad (_("ambiguous flags combination - '.profiler' directive ignored."));
596 input_line_pointer = end;
597 return;
598 }
599
600 /* Generate temp symbol which denotes current location. */
601 if (now_seg == absolute_section) /* Paranoia ? */
602 {
603 exp1.X_op = O_constant;
604 exp1.X_add_number = abs_section_offset;
605 as_warn (_("profiling in absolute section?"));
606 }
607 else
608 {
609 exp1.X_op = O_symbol;
610 exp1.X_add_symbol = symbol_temp_new_now ();
611 exp1.X_add_number = 0;
612 }
613
614 /* Generate a symbol which holds flags value. */
615 exp.X_op = O_constant;
616 exp.X_add_number = p_flags;
617
618 /* Save current section. */
619 seg = now_seg;
620 subseg = now_subseg;
621
622 /* Now go to .profiler section. */
623 obj_elf_change_section (".profiler", SHT_PROGBITS, 0, 0, 0, 0, 0);
624
625 /* Save flags. */
626 emit_expr (& exp, 2);
627
628 /* Save label value. */
629 emit_expr (& exp1, 2);
630
631 while (ops--)
632 {
633 /* Now get profiling info. */
634 halt = extract_operand (input_line_pointer, str, 1024);
635 /* Process like ".word xxx" directive. */
636 (void) parse_exp (str, & exp);
637 emit_expr (& exp, 2);
638 input_line_pointer = halt;
639 }
640
641 /* Fill the rest with zeros. */
642 exp.X_op = O_constant;
643 exp.X_add_number = 0;
644 while (left--)
645 emit_expr (& exp, 2);
646
647 /* Return to current section. */
648 subseg_set (seg, subseg);
649 }
650
651 static char *
extract_word(char * from,char * to,int limit)652 extract_word (char * from, char * to, int limit)
653 {
654 char *op_end;
655 int size = 0;
656
657 /* Drop leading whitespace. */
658 from = skip_space (from);
659 *to = 0;
660
661 /* Find the op code end. */
662 for (op_end = from; *op_end != 0 && is_part_of_name (*op_end);)
663 {
664 to[size++] = *op_end++;
665 if (size + 1 >= limit)
666 break;
667 }
668
669 to[size] = 0;
670 return op_end;
671 }
672
673 #define OPTION_MMCU 'm'
674 #define OPTION_RELAX 'Q'
675 #define OPTION_POLYMORPHS 'P'
676 #define OPTION_LARGE 'l'
677 static bfd_boolean large_model = FALSE;
678 #define OPTION_NO_INTR_NOPS 'N'
679 #define OPTION_INTR_NOPS 'n'
680 static bfd_boolean gen_interrupt_nops = FALSE;
681 #define OPTION_WARN_INTR_NOPS 'y'
682 #define OPTION_NO_WARN_INTR_NOPS 'Y'
683 static bfd_boolean warn_interrupt_nops = TRUE;
684 #define OPTION_UNKNOWN_INTR_NOPS 'u'
685 #define OPTION_NO_UNKNOWN_INTR_NOPS 'U'
686 static bfd_boolean do_unknown_interrupt_nops = TRUE;
687 #define OPTION_MCPU 'c'
688 #define OPTION_DATA_REGION 'r'
689 static bfd_boolean upper_data_region_in_use = FALSE;
690 /* The default is to use the lower region only. */
691 static bfd_boolean lower_data_region_only = TRUE;
692
693 enum
694 {
695 OPTION_SILICON_ERRATA = OPTION_MD_BASE,
696 OPTION_SILICON_ERRATA_WARN,
697 };
698
699 static unsigned int silicon_errata_fix = 0;
700 static unsigned int silicon_errata_warn = 0;
701 #define SILICON_ERRATA_CPU4 (1 << 0)
702 #define SILICON_ERRATA_CPU8 (1 << 1)
703 #define SILICON_ERRATA_CPU11 (1 << 2)
704 #define SILICON_ERRATA_CPU12 (1 << 3)
705 #define SILICON_ERRATA_CPU13 (1 << 4)
706 #define SILICON_ERRATA_CPU19 (1 << 5)
707
708 static void
msp430_set_arch(int option)709 msp430_set_arch (int option)
710 {
711 char str[32]; /* 32 for good measure. */
712
713 input_line_pointer = extract_word (input_line_pointer, str, 32);
714
715 md_parse_option (option, str);
716 bfd_set_arch_mach (stdoutput, TARGET_ARCH,
717 target_is_430x () ? bfd_mach_msp430x : bfd_mach_msp11);
718 }
719
720 /* This is a copy of the same data structure found in gcc/config/msp430/msp430.c
721 Keep these two structures in sync.
722 The data in this structure has been extracted from version 1.194 of the
723 devices.csv file released by TI in September 2016. */
724
725 struct msp430_mcu_data
726 {
727 const char * name;
728 unsigned int revision; /* 0=> MSP430, 1=>MSP430X, 2=> MSP430Xv2. */
729 unsigned int hwmpy; /* 0=>none, 1=>16-bit, 2=>16-bit w/sign extend, 4=>32-bit, 8=> 32-bit (5xx). */
730 }
731 msp430_mcu_data [] =
732 {
733 { "cc430f5123",2,8 },
734 { "cc430f5125",2,8 },
735 { "cc430f5133",2,8 },
736 { "cc430f5135",2,8 },
737 { "cc430f5137",2,8 },
738 { "cc430f5143",2,8 },
739 { "cc430f5145",2,8 },
740 { "cc430f5147",2,8 },
741 { "cc430f6125",2,8 },
742 { "cc430f6126",2,8 },
743 { "cc430f6127",2,8 },
744 { "cc430f6135",2,8 },
745 { "cc430f6137",2,8 },
746 { "cc430f6143",2,8 },
747 { "cc430f6145",2,8 },
748 { "cc430f6147",2,8 },
749 { "msp430afe221",0,2 },
750 { "msp430afe222",0,2 },
751 { "msp430afe223",0,2 },
752 { "msp430afe231",0,2 },
753 { "msp430afe232",0,2 },
754 { "msp430afe233",0,2 },
755 { "msp430afe251",0,2 },
756 { "msp430afe252",0,2 },
757 { "msp430afe253",0,2 },
758 { "msp430bt5190",2,8 },
759 { "msp430c091",0,0 },
760 { "msp430c092",0,0 },
761 { "msp430c111",0,0 },
762 { "msp430c1111",0,0 },
763 { "msp430c112",0,0 },
764 { "msp430c1121",0,0 },
765 { "msp430c1331",0,0 },
766 { "msp430c1351",0,0 },
767 { "msp430c311s",0,0 },
768 { "msp430c312",0,0 },
769 { "msp430c313",0,0 },
770 { "msp430c314",0,0 },
771 { "msp430c315",0,0 },
772 { "msp430c323",0,0 },
773 { "msp430c325",0,0 },
774 { "msp430c336",0,1 },
775 { "msp430c337",0,1 },
776 { "msp430c412",0,0 },
777 { "msp430c413",0,0 },
778 { "msp430cg4616",1,1 },
779 { "msp430cg4617",1,1 },
780 { "msp430cg4618",1,1 },
781 { "msp430cg4619",1,1 },
782 { "msp430e112",0,0 },
783 { "msp430e313",0,0 },
784 { "msp430e315",0,0 },
785 { "msp430e325",0,0 },
786 { "msp430e337",0,1 },
787 { "msp430f110",0,0 },
788 { "msp430f1101",0,0 },
789 { "msp430f1101a",0,0 },
790 { "msp430f1111",0,0 },
791 { "msp430f1111a",0,0 },
792 { "msp430f112",0,0 },
793 { "msp430f1121",0,0 },
794 { "msp430f1121a",0,0 },
795 { "msp430f1122",0,0 },
796 { "msp430f1132",0,0 },
797 { "msp430f122",0,0 },
798 { "msp430f1222",0,0 },
799 { "msp430f123",0,0 },
800 { "msp430f1232",0,0 },
801 { "msp430f133",0,0 },
802 { "msp430f135",0,0 },
803 { "msp430f147",0,1 },
804 { "msp430f1471",0,1 },
805 { "msp430f148",0,1 },
806 { "msp430f1481",0,1 },
807 { "msp430f149",0,1 },
808 { "msp430f1491",0,1 },
809 { "msp430f155",0,0 },
810 { "msp430f156",0,0 },
811 { "msp430f157",0,0 },
812 { "msp430f1610",0,1 },
813 { "msp430f1611",0,1 },
814 { "msp430f1612",0,1 },
815 { "msp430f167",0,1 },
816 { "msp430f168",0,1 },
817 { "msp430f169",0,1 },
818 { "msp430f2001",0,0 },
819 { "msp430f2002",0,0 },
820 { "msp430f2003",0,0 },
821 { "msp430f2011",0,0 },
822 { "msp430f2012",0,0 },
823 { "msp430f2013",0,0 },
824 { "msp430f2101",0,0 },
825 { "msp430f2111",0,0 },
826 { "msp430f2112",0,0 },
827 { "msp430f2121",0,0 },
828 { "msp430f2122",0,0 },
829 { "msp430f2131",0,0 },
830 { "msp430f2132",0,0 },
831 { "msp430f2232",0,0 },
832 { "msp430f2234",0,0 },
833 { "msp430f2252",0,0 },
834 { "msp430f2254",0,0 },
835 { "msp430f2272",0,0 },
836 { "msp430f2274",0,0 },
837 { "msp430f233",0,2 },
838 { "msp430f2330",0,2 },
839 { "msp430f235",0,2 },
840 { "msp430f2350",0,2 },
841 { "msp430f2370",0,2 },
842 { "msp430f2410",0,2 },
843 { "msp430f2416",1,2 },
844 { "msp430f2417",1,2 },
845 { "msp430f2418",1,2 },
846 { "msp430f2419",1,2 },
847 { "msp430f247",0,2 },
848 { "msp430f2471",0,2 },
849 { "msp430f248",0,2 },
850 { "msp430f2481",0,2 },
851 { "msp430f249",0,2 },
852 { "msp430f2491",0,2 },
853 { "msp430f2616",1,2 },
854 { "msp430f2617",1,2 },
855 { "msp430f2618",1,2 },
856 { "msp430f2619",1,2 },
857 { "msp430f412",0,0 },
858 { "msp430f413",0,0 },
859 { "msp430f4132",0,0 },
860 { "msp430f415",0,0 },
861 { "msp430f4152",0,0 },
862 { "msp430f417",0,0 },
863 { "msp430f423",0,1 },
864 { "msp430f423a",0,1 },
865 { "msp430f425",0,1 },
866 { "msp430f4250",0,0 },
867 { "msp430f425a",0,1 },
868 { "msp430f4260",0,0 },
869 { "msp430f427",0,1 },
870 { "msp430f4270",0,0 },
871 { "msp430f427a",0,1 },
872 { "msp430f435",0,0 },
873 { "msp430f4351",0,0 },
874 { "msp430f436",0,0 },
875 { "msp430f4361",0,0 },
876 { "msp430f437",0,0 },
877 { "msp430f4371",0,0 },
878 { "msp430f438",0,0 },
879 { "msp430f439",0,0 },
880 { "msp430f447",0,1 },
881 { "msp430f448",0,1 },
882 { "msp430f4481",0,1 },
883 { "msp430f449",0,1 },
884 { "msp430f4491",0,1 },
885 { "msp430f4616",1,1 },
886 { "msp430f46161",1,1 },
887 { "msp430f4617",1,1 },
888 { "msp430f46171",1,1 },
889 { "msp430f4618",1,1 },
890 { "msp430f46181",1,1 },
891 { "msp430f4619",1,1 },
892 { "msp430f46191",1,1 },
893 { "msp430f47126",1,4 },
894 { "msp430f47127",1,4 },
895 { "msp430f47163",1,4 },
896 { "msp430f47166",1,4 },
897 { "msp430f47167",1,4 },
898 { "msp430f47173",1,4 },
899 { "msp430f47176",1,4 },
900 { "msp430f47177",1,4 },
901 { "msp430f47183",1,4 },
902 { "msp430f47186",1,4 },
903 { "msp430f47187",1,4 },
904 { "msp430f47193",1,4 },
905 { "msp430f47196",1,4 },
906 { "msp430f47197",1,4 },
907 { "msp430f477",0,0 },
908 { "msp430f478",0,0 },
909 { "msp430f4783",0,4 },
910 { "msp430f4784",0,4 },
911 { "msp430f479",0,0 },
912 { "msp430f4793",0,4 },
913 { "msp430f4794",0,4 },
914 { "msp430f5131",2,8 },
915 { "msp430f5132",2,8 },
916 { "msp430f5151",2,8 },
917 { "msp430f5152",2,8 },
918 { "msp430f5171",2,8 },
919 { "msp430f5172",2,8 },
920 { "msp430f5212",2,8 },
921 { "msp430f5213",2,8 },
922 { "msp430f5214",2,8 },
923 { "msp430f5217",2,8 },
924 { "msp430f5218",2,8 },
925 { "msp430f5219",2,8 },
926 { "msp430f5222",2,8 },
927 { "msp430f5223",2,8 },
928 { "msp430f5224",2,8 },
929 { "msp430f5227",2,8 },
930 { "msp430f5228",2,8 },
931 { "msp430f5229",2,8 },
932 { "msp430f5232",2,8 },
933 { "msp430f5234",2,8 },
934 { "msp430f5237",2,8 },
935 { "msp430f5239",2,8 },
936 { "msp430f5242",2,8 },
937 { "msp430f5244",2,8 },
938 { "msp430f5247",2,8 },
939 { "msp430f5249",2,8 },
940 { "msp430f5252",2,8 },
941 { "msp430f5253",2,8 },
942 { "msp430f5254",2,8 },
943 { "msp430f5255",2,8 },
944 { "msp430f5256",2,8 },
945 { "msp430f5257",2,8 },
946 { "msp430f5258",2,8 },
947 { "msp430f5259",2,8 },
948 { "msp430f5304",2,8 },
949 { "msp430f5308",2,8 },
950 { "msp430f5309",2,8 },
951 { "msp430f5310",2,8 },
952 { "msp430f5324",2,8 },
953 { "msp430f5325",2,8 },
954 { "msp430f5326",2,8 },
955 { "msp430f5327",2,8 },
956 { "msp430f5328",2,8 },
957 { "msp430f5329",2,8 },
958 { "msp430f5333",2,8 },
959 { "msp430f5335",2,8 },
960 { "msp430f5336",2,8 },
961 { "msp430f5338",2,8 },
962 { "msp430f5340",2,8 },
963 { "msp430f5341",2,8 },
964 { "msp430f5342",2,8 },
965 { "msp430f5358",2,8 },
966 { "msp430f5359",2,8 },
967 { "msp430f5418",2,8 },
968 { "msp430f5418a",2,8 },
969 { "msp430f5419",2,8 },
970 { "msp430f5419a",2,8 },
971 { "msp430f5435",2,8 },
972 { "msp430f5435a",2,8 },
973 { "msp430f5436",2,8 },
974 { "msp430f5436a",2,8 },
975 { "msp430f5437",2,8 },
976 { "msp430f5437a",2,8 },
977 { "msp430f5438",2,8 },
978 { "msp430f5438a",2,8 },
979 { "msp430f5500",2,8 },
980 { "msp430f5501",2,8 },
981 { "msp430f5502",2,8 },
982 { "msp430f5503",2,8 },
983 { "msp430f5504",2,8 },
984 { "msp430f5505",2,8 },
985 { "msp430f5506",2,8 },
986 { "msp430f5507",2,8 },
987 { "msp430f5508",2,8 },
988 { "msp430f5509",2,8 },
989 { "msp430f5510",2,8 },
990 { "msp430f5513",2,8 },
991 { "msp430f5514",2,8 },
992 { "msp430f5515",2,8 },
993 { "msp430f5517",2,8 },
994 { "msp430f5519",2,8 },
995 { "msp430f5521",2,8 },
996 { "msp430f5522",2,8 },
997 { "msp430f5524",2,8 },
998 { "msp430f5525",2,8 },
999 { "msp430f5526",2,8 },
1000 { "msp430f5527",2,8 },
1001 { "msp430f5528",2,8 },
1002 { "msp430f5529",2,8 },
1003 { "msp430f5630",2,8 },
1004 { "msp430f5631",2,8 },
1005 { "msp430f5632",2,8 },
1006 { "msp430f5633",2,8 },
1007 { "msp430f5634",2,8 },
1008 { "msp430f5635",2,8 },
1009 { "msp430f5636",2,8 },
1010 { "msp430f5637",2,8 },
1011 { "msp430f5638",2,8 },
1012 { "msp430f5658",2,8 },
1013 { "msp430f5659",2,8 },
1014 { "msp430f5xx_6xxgeneric",2,8 },
1015 { "msp430f6433",2,8 },
1016 { "msp430f6435",2,8 },
1017 { "msp430f6436",2,8 },
1018 { "msp430f6438",2,8 },
1019 { "msp430f6458",2,8 },
1020 { "msp430f6459",2,8 },
1021 { "msp430f6630",2,8 },
1022 { "msp430f6631",2,8 },
1023 { "msp430f6632",2,8 },
1024 { "msp430f6633",2,8 },
1025 { "msp430f6634",2,8 },
1026 { "msp430f6635",2,8 },
1027 { "msp430f6636",2,8 },
1028 { "msp430f6637",2,8 },
1029 { "msp430f6638",2,8 },
1030 { "msp430f6658",2,8 },
1031 { "msp430f6659",2,8 },
1032 { "msp430f6720",2,8 },
1033 { "msp430f6720a",2,8 },
1034 { "msp430f6721",2,8 },
1035 { "msp430f6721a",2,8 },
1036 { "msp430f6723",2,8 },
1037 { "msp430f6723a",2,8 },
1038 { "msp430f6724",2,8 },
1039 { "msp430f6724a",2,8 },
1040 { "msp430f6725",2,8 },
1041 { "msp430f6725a",2,8 },
1042 { "msp430f6726",2,8 },
1043 { "msp430f6726a",2,8 },
1044 { "msp430f6730",2,8 },
1045 { "msp430f6730a",2,8 },
1046 { "msp430f6731",2,8 },
1047 { "msp430f6731a",2,8 },
1048 { "msp430f6733",2,8 },
1049 { "msp430f6733a",2,8 },
1050 { "msp430f6734",2,8 },
1051 { "msp430f6734a",2,8 },
1052 { "msp430f6735",2,8 },
1053 { "msp430f6735a",2,8 },
1054 { "msp430f6736",2,8 },
1055 { "msp430f6736a",2,8 },
1056 { "msp430f6745",2,8 },
1057 { "msp430f67451",2,8 },
1058 { "msp430f67451a",2,8 },
1059 { "msp430f6745a",2,8 },
1060 { "msp430f6746",2,8 },
1061 { "msp430f67461",2,8 },
1062 { "msp430f67461a",2,8 },
1063 { "msp430f6746a",2,8 },
1064 { "msp430f6747",2,8 },
1065 { "msp430f67471",2,8 },
1066 { "msp430f67471a",2,8 },
1067 { "msp430f6747a",2,8 },
1068 { "msp430f6748",2,8 },
1069 { "msp430f67481",2,8 },
1070 { "msp430f67481a",2,8 },
1071 { "msp430f6748a",2,8 },
1072 { "msp430f6749",2,8 },
1073 { "msp430f67491",2,8 },
1074 { "msp430f67491a",2,8 },
1075 { "msp430f6749a",2,8 },
1076 { "msp430f67621",2,8 },
1077 { "msp430f67621a",2,8 },
1078 { "msp430f67641",2,8 },
1079 { "msp430f67641a",2,8 },
1080 { "msp430f6765",2,8 },
1081 { "msp430f67651",2,8 },
1082 { "msp430f67651a",2,8 },
1083 { "msp430f6765a",2,8 },
1084 { "msp430f6766",2,8 },
1085 { "msp430f67661",2,8 },
1086 { "msp430f67661a",2,8 },
1087 { "msp430f6766a",2,8 },
1088 { "msp430f6767",2,8 },
1089 { "msp430f67671",2,8 },
1090 { "msp430f67671a",2,8 },
1091 { "msp430f6767a",2,8 },
1092 { "msp430f6768",2,8 },
1093 { "msp430f67681",2,8 },
1094 { "msp430f67681a",2,8 },
1095 { "msp430f6768a",2,8 },
1096 { "msp430f6769",2,8 },
1097 { "msp430f67691",2,8 },
1098 { "msp430f67691a",2,8 },
1099 { "msp430f6769a",2,8 },
1100 { "msp430f6775",2,8 },
1101 { "msp430f67751",2,8 },
1102 { "msp430f67751a",2,8 },
1103 { "msp430f6775a",2,8 },
1104 { "msp430f6776",2,8 },
1105 { "msp430f67761",2,8 },
1106 { "msp430f67761a",2,8 },
1107 { "msp430f6776a",2,8 },
1108 { "msp430f6777",2,8 },
1109 { "msp430f67771",2,8 },
1110 { "msp430f67771a",2,8 },
1111 { "msp430f6777a",2,8 },
1112 { "msp430f6778",2,8 },
1113 { "msp430f67781",2,8 },
1114 { "msp430f67781a",2,8 },
1115 { "msp430f6778a",2,8 },
1116 { "msp430f6779",2,8 },
1117 { "msp430f67791",2,8 },
1118 { "msp430f67791a",2,8 },
1119 { "msp430f6779a",2,8 },
1120 { "msp430fe423",0,0 },
1121 { "msp430fe4232",0,0 },
1122 { "msp430fe423a",0,0 },
1123 { "msp430fe4242",0,0 },
1124 { "msp430fe425",0,0 },
1125 { "msp430fe4252",0,0 },
1126 { "msp430fe425a",0,0 },
1127 { "msp430fe427",0,0 },
1128 { "msp430fe4272",0,0 },
1129 { "msp430fe427a",0,0 },
1130 { "msp430fg4250",0,0 },
1131 { "msp430fg4260",0,0 },
1132 { "msp430fg4270",0,0 },
1133 { "msp430fg437",0,0 },
1134 { "msp430fg438",0,0 },
1135 { "msp430fg439",0,0 },
1136 { "msp430fg4616",1,1 },
1137 { "msp430fg4617",1,1 },
1138 { "msp430fg4618",1,1 },
1139 { "msp430fg4619",1,1 },
1140 { "msp430fg477",0,0 },
1141 { "msp430fg478",0,0 },
1142 { "msp430fg479",0,0 },
1143 { "msp430fg6425",2,8 },
1144 { "msp430fg6426",2,8 },
1145 { "msp430fg6625",2,8 },
1146 { "msp430fg6626",2,8 },
1147 { "msp430fr2032",2,0 },
1148 { "msp430fr2033",2,0 },
1149 { "msp430fr2110",2,0 },
1150 { "msp430fr2111",2,0 },
1151 { "msp430fr2310",2,0 },
1152 { "msp430fr2311",2,0 },
1153 { "msp430fr2433",2,8 },
1154 { "msp430fr2532",2,8 },
1155 { "msp430fr2533",2,8 },
1156 { "msp430fr2632",2,8 },
1157 { "msp430fr2633",2,8 },
1158 { "msp430fr2xx_4xxgeneric",2,8 },
1159 { "msp430fr4131",2,0 },
1160 { "msp430fr4132",2,0 },
1161 { "msp430fr4133",2,0 },
1162 { "msp430fr5720",2,8 },
1163 { "msp430fr5721",2,8 },
1164 { "msp430fr5722",2,8 },
1165 { "msp430fr5723",2,8 },
1166 { "msp430fr5724",2,8 },
1167 { "msp430fr5725",2,8 },
1168 { "msp430fr5726",2,8 },
1169 { "msp430fr5727",2,8 },
1170 { "msp430fr5728",2,8 },
1171 { "msp430fr5729",2,8 },
1172 { "msp430fr5730",2,8 },
1173 { "msp430fr5731",2,8 },
1174 { "msp430fr5732",2,8 },
1175 { "msp430fr5733",2,8 },
1176 { "msp430fr5734",2,8 },
1177 { "msp430fr5735",2,8 },
1178 { "msp430fr5736",2,8 },
1179 { "msp430fr5737",2,8 },
1180 { "msp430fr5738",2,8 },
1181 { "msp430fr5739",2,8 },
1182 { "msp430fr57xxgeneric",2,8 },
1183 { "msp430fr5847",2,8 },
1184 { "msp430fr58471",2,8 },
1185 { "msp430fr5848",2,8 },
1186 { "msp430fr5849",2,8 },
1187 { "msp430fr5857",2,8 },
1188 { "msp430fr5858",2,8 },
1189 { "msp430fr5859",2,8 },
1190 { "msp430fr5867",2,8 },
1191 { "msp430fr58671",2,8 },
1192 { "msp430fr5868",2,8 },
1193 { "msp430fr5869",2,8 },
1194 { "msp430fr5870",2,8 },
1195 { "msp430fr5872",2,8 },
1196 { "msp430fr58721",2,8 },
1197 { "msp430fr5887",2,8 },
1198 { "msp430fr5888",2,8 },
1199 { "msp430fr5889",2,8 },
1200 { "msp430fr58891",2,8 },
1201 { "msp430fr5922",2,8 },
1202 { "msp430fr59221",2,8 },
1203 { "msp430fr5947",2,8 },
1204 { "msp430fr59471",2,8 },
1205 { "msp430fr5948",2,8 },
1206 { "msp430fr5949",2,8 },
1207 { "msp430fr5957",2,8 },
1208 { "msp430fr5958",2,8 },
1209 { "msp430fr5959",2,8 },
1210 { "msp430fr5962",2,8 },
1211 { "msp430fr5964",2,8 },
1212 { "msp430fr5967",2,8 },
1213 { "msp430fr5968",2,8 },
1214 { "msp430fr5969",2,8 },
1215 { "msp430fr59691",2,8 },
1216 { "msp430fr5970",2,8 },
1217 { "msp430fr5972",2,8 },
1218 { "msp430fr59721",2,8 },
1219 { "msp430fr5986",2,8 },
1220 { "msp430fr5987",2,8 },
1221 { "msp430fr5988",2,8 },
1222 { "msp430fr5989",2,8 },
1223 { "msp430fr59891",2,8 },
1224 { "msp430fr5992",2,8 },
1225 { "msp430fr5994",2,8 },
1226 { "msp430fr59941",2,8 },
1227 { "msp430fr5xx_6xxgeneric",2,8 },
1228 { "msp430fr6820",2,8 },
1229 { "msp430fr6822",2,8 },
1230 { "msp430fr68221",2,8 },
1231 { "msp430fr6870",2,8 },
1232 { "msp430fr6872",2,8 },
1233 { "msp430fr68721",2,8 },
1234 { "msp430fr6877",2,8 },
1235 { "msp430fr6879",2,8 },
1236 { "msp430fr68791",2,8 },
1237 { "msp430fr6887",2,8 },
1238 { "msp430fr6888",2,8 },
1239 { "msp430fr6889",2,8 },
1240 { "msp430fr68891",2,8 },
1241 { "msp430fr6920",2,8 },
1242 { "msp430fr6922",2,8 },
1243 { "msp430fr69221",2,8 },
1244 { "msp430fr6927",2,8 },
1245 { "msp430fr69271",2,8 },
1246 { "msp430fr6928",2,8 },
1247 { "msp430fr6970",2,8 },
1248 { "msp430fr6972",2,8 },
1249 { "msp430fr69721",2,8 },
1250 { "msp430fr6977",2,8 },
1251 { "msp430fr6979",2,8 },
1252 { "msp430fr69791",2,8 },
1253 { "msp430fr6987",2,8 },
1254 { "msp430fr6988",2,8 },
1255 { "msp430fr6989",2,8 },
1256 { "msp430fr69891",2,8 },
1257 { "msp430fw423",0,0 },
1258 { "msp430fw425",0,0 },
1259 { "msp430fw427",0,0 },
1260 { "msp430fw428",0,0 },
1261 { "msp430fw429",0,0 },
1262 { "msp430g2001",0,0 },
1263 { "msp430g2101",0,0 },
1264 { "msp430g2102",0,0 },
1265 { "msp430g2111",0,0 },
1266 { "msp430g2112",0,0 },
1267 { "msp430g2113",0,0 },
1268 { "msp430g2121",0,0 },
1269 { "msp430g2131",0,0 },
1270 { "msp430g2132",0,0 },
1271 { "msp430g2152",0,0 },
1272 { "msp430g2153",0,0 },
1273 { "msp430g2201",0,0 },
1274 { "msp430g2202",0,0 },
1275 { "msp430g2203",0,0 },
1276 { "msp430g2210",0,0 },
1277 { "msp430g2211",0,0 },
1278 { "msp430g2212",0,0 },
1279 { "msp430g2213",0,0 },
1280 { "msp430g2221",0,0 },
1281 { "msp430g2230",0,0 },
1282 { "msp430g2231",0,0 },
1283 { "msp430g2232",0,0 },
1284 { "msp430g2233",0,0 },
1285 { "msp430g2252",0,0 },
1286 { "msp430g2253",0,0 },
1287 { "msp430g2302",0,0 },
1288 { "msp430g2303",0,0 },
1289 { "msp430g2312",0,0 },
1290 { "msp430g2313",0,0 },
1291 { "msp430g2332",0,0 },
1292 { "msp430g2333",0,0 },
1293 { "msp430g2352",0,0 },
1294 { "msp430g2353",0,0 },
1295 { "msp430g2402",0,0 },
1296 { "msp430g2403",0,0 },
1297 { "msp430g2412",0,0 },
1298 { "msp430g2413",0,0 },
1299 { "msp430g2432",0,0 },
1300 { "msp430g2433",0,0 },
1301 { "msp430g2444",0,0 },
1302 { "msp430g2452",0,0 },
1303 { "msp430g2453",0,0 },
1304 { "msp430g2513",0,0 },
1305 { "msp430g2533",0,0 },
1306 { "msp430g2544",0,0 },
1307 { "msp430g2553",0,0 },
1308 { "msp430g2744",0,0 },
1309 { "msp430g2755",0,0 },
1310 { "msp430g2855",0,0 },
1311 { "msp430g2955",0,0 },
1312 { "msp430i2020",0,2 },
1313 { "msp430i2021",0,2 },
1314 { "msp430i2030",0,2 },
1315 { "msp430i2031",0,2 },
1316 { "msp430i2040",0,2 },
1317 { "msp430i2041",0,2 },
1318 { "msp430i2xxgeneric",0,2 },
1319 { "msp430l092",0,0 },
1320 { "msp430p112",0,0 },
1321 { "msp430p313",0,0 },
1322 { "msp430p315",0,0 },
1323 { "msp430p315s",0,0 },
1324 { "msp430p325",0,0 },
1325 { "msp430p337",0,1 },
1326 { "msp430sl5438a",2,8 },
1327 { "msp430tch5e",0,0 },
1328 { "msp430xgeneric",2,8 },
1329 { "rf430f5144",2,8 },
1330 { "rf430f5155",2,8 },
1331 { "rf430f5175",2,8 },
1332 { "rf430frl152h",0,0 },
1333 { "rf430frl152h_rom",0,0 },
1334 { "rf430frl153h",0,0 },
1335 { "rf430frl153h_rom",0,0 },
1336 { "rf430frl154h",0,0 },
1337 { "rf430frl154h_rom",0,0 }
1338 };
1339
1340 int
md_parse_option(int c,const char * arg)1341 md_parse_option (int c, const char * arg)
1342 {
1343 switch (c)
1344 {
1345 case OPTION_SILICON_ERRATA:
1346 case OPTION_SILICON_ERRATA_WARN:
1347 {
1348 signed int i;
1349 const struct
1350 {
1351 const char * name;
1352 unsigned int length;
1353 unsigned int bitfield;
1354 } erratas[] =
1355 {
1356 { STRING_COMMA_LEN ("cpu4"), SILICON_ERRATA_CPU4 },
1357 { STRING_COMMA_LEN ("cpu8"), SILICON_ERRATA_CPU8 },
1358 { STRING_COMMA_LEN ("cpu11"), SILICON_ERRATA_CPU11 },
1359 { STRING_COMMA_LEN ("cpu12"), SILICON_ERRATA_CPU12 },
1360 { STRING_COMMA_LEN ("cpu13"), SILICON_ERRATA_CPU13 },
1361 { STRING_COMMA_LEN ("cpu19"), SILICON_ERRATA_CPU19 },
1362 };
1363
1364 do
1365 {
1366 for (i = ARRAY_SIZE (erratas); i--;)
1367 if (strncasecmp (arg, erratas[i].name, erratas[i].length) == 0)
1368 {
1369 if (c == OPTION_SILICON_ERRATA)
1370 silicon_errata_fix |= erratas[i].bitfield;
1371 else
1372 silicon_errata_warn |= erratas[i].bitfield;
1373 arg += erratas[i].length;
1374 break;
1375 }
1376 if (i < 0)
1377 {
1378 as_warn (_("Unrecognised CPU errata name starting here: %s"), arg);
1379 break;
1380 }
1381 if (*arg == 0)
1382 break;
1383 if (*arg != ',')
1384 as_warn (_("Expecting comma after CPU errata name, not: %s"), arg);
1385 else
1386 arg ++;
1387 }
1388 while (*arg != 0);
1389 }
1390 return 1;
1391
1392 case OPTION_MMCU:
1393 if (arg == NULL)
1394 as_fatal (_("MCU option requires a name\n"));
1395
1396 if (strcasecmp ("msp430", arg) == 0)
1397 selected_isa = MSP_ISA_430;
1398 else if (strcasecmp ("msp430xv2", arg) == 0)
1399 selected_isa = MSP_ISA_430Xv2;
1400 else if (strcasecmp ("msp430x", arg) == 0)
1401 selected_isa = MSP_ISA_430X;
1402 else
1403 {
1404 int i;
1405
1406 for (i = ARRAY_SIZE (msp430_mcu_data); i--;)
1407 if (strcasecmp (msp430_mcu_data[i].name, arg) == 0)
1408 {
1409 switch (msp430_mcu_data[i].revision)
1410 {
1411 case 0: selected_isa = MSP_ISA_430; break;
1412 case 1: selected_isa = MSP_ISA_430X; break;
1413 case 2: selected_isa = MSP_ISA_430Xv2; break;
1414 }
1415 break;
1416 }
1417 }
1418 /* It is not an error if we do not match the MCU name. */
1419 return 1;
1420
1421 case OPTION_MCPU:
1422 if (strcmp (arg, "430") == 0
1423 || strcasecmp (arg, "msp430") == 0)
1424 selected_isa = MSP_ISA_430;
1425 else if (strcasecmp (arg, "430x") == 0
1426 || strcasecmp (arg, "msp430x") == 0)
1427 selected_isa = MSP_ISA_430X;
1428 else if (strcasecmp (arg, "430xv2") == 0
1429 || strcasecmp (arg, "msp430xv2") == 0)
1430 selected_isa = MSP_ISA_430Xv2;
1431 else
1432 as_fatal (_("unrecognised argument to -mcpu option '%s'"), arg);
1433 return 1;
1434
1435 case OPTION_RELAX:
1436 msp430_enable_relax = 1;
1437 return 1;
1438
1439 case OPTION_POLYMORPHS:
1440 msp430_enable_polys = 1;
1441 return 1;
1442
1443 case OPTION_LARGE:
1444 large_model = TRUE;
1445 return 1;
1446
1447 case OPTION_NO_INTR_NOPS:
1448 gen_interrupt_nops = FALSE;
1449 return 1;
1450 case OPTION_INTR_NOPS:
1451 gen_interrupt_nops = TRUE;
1452 return 1;
1453
1454 case OPTION_WARN_INTR_NOPS:
1455 warn_interrupt_nops = TRUE;
1456 return 1;
1457 case OPTION_NO_WARN_INTR_NOPS:
1458 warn_interrupt_nops = FALSE;
1459 return 1;
1460
1461 case OPTION_UNKNOWN_INTR_NOPS:
1462 do_unknown_interrupt_nops = TRUE;
1463 return 1;
1464 case OPTION_NO_UNKNOWN_INTR_NOPS:
1465 do_unknown_interrupt_nops = FALSE;
1466 return 1;
1467
1468 case OPTION_DATA_REGION:
1469 if (strcmp (arg, "upper") == 0
1470 || strcmp (arg, "either") == 0)
1471 upper_data_region_in_use = TRUE;
1472 if (strcmp (arg, "upper") == 0
1473 || strcmp (arg, "either") == 0
1474 /* With data-region=none, the compiler has generated code assuming
1475 data could be in the upper region, but nothing has been explicitly
1476 placed there. */
1477 || strcmp (arg, "none") == 0)
1478 lower_data_region_only = FALSE;
1479 return 1;
1480 }
1481
1482 return 0;
1483 }
1484
1485 /* The intention here is to have the mere presence of these sections
1486 cause the object to have a reference to a well-known symbol. This
1487 reference pulls in the bits of the runtime (crt0) that initialize
1488 these sections. Thus, for example, the startup code to call
1489 memset() to initialize .bss will only be linked in when there is a
1490 non-empty .bss section. Otherwise, the call would exist but have a
1491 zero length parameter, which is a waste of memory and cycles.
1492
1493 The code which initializes these sections should have a global
1494 label for these symbols, and should be marked with KEEP() in the
1495 linker script. */
1496
1497 static void
msp430_make_init_symbols(const char * name)1498 msp430_make_init_symbols (const char * name)
1499 {
1500 if (strncmp (name, ".bss", 4) == 0
1501 || strncmp (name, ".lower.bss", 10) == 0
1502 || strncmp (name, ".either.bss", 11) == 0
1503 || strncmp (name, ".gnu.linkonce.b.", 16) == 0)
1504 (void) symbol_find_or_make ("__crt0_init_bss");
1505
1506 if (strncmp (name, ".data", 5) == 0
1507 || strncmp (name, ".lower.data", 11) == 0
1508 || strncmp (name, ".either.data", 12) == 0
1509 || strncmp (name, ".gnu.linkonce.d.", 16) == 0)
1510 (void) symbol_find_or_make ("__crt0_movedata");
1511 /* Note - data assigned to the .either.data section may end up being
1512 placed in the .upper.data section if the .lower.data section is
1513 full. Hence the need to define the crt0 symbol.
1514 The linker may create upper or either data sections, even when none exist
1515 at the moment, so use the value of the data-region flag to determine if
1516 the symbol is needed. */
1517 if (strncmp (name, ".either.data", 12) == 0
1518 || strncmp (name, ".upper.data", 11) == 0
1519 || upper_data_region_in_use)
1520 (void) symbol_find_or_make ("__crt0_move_highdata");
1521
1522 /* See note about .either.data above. */
1523 if (strncmp (name, ".upper.bss", 10) == 0
1524 || strncmp (name, ".either.bss", 11) == 0
1525 || upper_data_region_in_use)
1526 (void) symbol_find_or_make ("__crt0_init_highbss");
1527
1528 /* The following symbols are for the crt0 functions that run through
1529 the different .*_array sections and call the functions placed there.
1530 - init_array stores global static C++ constructors to run before main.
1531 - preinit_array is not expected to ever be used for MSP430.
1532 GCC only places initialization functions for runtime "sanitizers"
1533 (i.e. {a,l,t,u}san) and "virtual table verification" in preinit_array.
1534 - fini_array stores global static C++ destructors to run after calling
1535 exit() or returning from main.
1536 __crt0_run_array is required to actually call the functions in the above
1537 arrays. */
1538 if (strncmp (name, ".init_array", 11) == 0)
1539 {
1540 (void) symbol_find_or_make ("__crt0_run_init_array");
1541 (void) symbol_find_or_make ("__crt0_run_array");
1542 }
1543 else if (strncmp (name, ".preinit_array", 14) == 0)
1544 {
1545 (void) symbol_find_or_make ("__crt0_run_preinit_array");
1546 (void) symbol_find_or_make ("__crt0_run_array");
1547 }
1548 else if (strncmp (name, ".fini_array", 11) == 0)
1549 {
1550 (void) symbol_find_or_make ("__crt0_run_fini_array");
1551 (void) symbol_find_or_make ("__crt0_run_array");
1552 }
1553 }
1554
1555 static void
msp430_section(int arg)1556 msp430_section (int arg)
1557 {
1558 char * saved_ilp = input_line_pointer;
1559 const char * name = obj_elf_section_name ();
1560
1561 msp430_make_init_symbols (name);
1562
1563 input_line_pointer = saved_ilp;
1564 obj_elf_section (arg);
1565 }
1566
1567 void
msp430_frob_section(asection * sec)1568 msp430_frob_section (asection *sec)
1569 {
1570 const char *name = sec->name;
1571
1572 if (sec->size == 0)
1573 return;
1574
1575 msp430_make_init_symbols (name);
1576 }
1577
1578 static void
msp430_lcomm(int ignore ATTRIBUTE_UNUSED)1579 msp430_lcomm (int ignore ATTRIBUTE_UNUSED)
1580 {
1581 symbolS *symbolP = s_comm_internal (0, s_lcomm_internal);
1582
1583 if (symbolP)
1584 symbol_get_bfdsym (symbolP)->flags |= BSF_OBJECT;
1585 (void) symbol_find_or_make ("__crt0_init_bss");
1586 }
1587
1588 static void
msp430_comm(int needs_align)1589 msp430_comm (int needs_align)
1590 {
1591 s_comm_internal (needs_align, elf_common_parse);
1592 (void) symbol_find_or_make ("__crt0_init_bss");
1593 }
1594
1595 static void
msp430_refsym(int arg ATTRIBUTE_UNUSED)1596 msp430_refsym (int arg ATTRIBUTE_UNUSED)
1597 {
1598 char sym_name[1024];
1599 input_line_pointer = extract_word (input_line_pointer, sym_name, 1024);
1600
1601 (void) symbol_find_or_make (sym_name);
1602 }
1603
1604 /* Handle a .mspabi_attribute or .gnu_attribute directive.
1605 attr_type is 0 for .mspabi_attribute or 1 for .gnu_attribute.
1606 This is only used for validating the attributes in the assembly file against
1607 the options gas has been invoked with. If the attributes and options are
1608 compatible then we add the attributes to the assembly file in
1609 msp430_md_end. */
1610 static void
msp430_object_attribute(int attr_type)1611 msp430_object_attribute (int attr_type)
1612 {
1613 char tag_name_s[32];
1614 char tag_value_s[32];
1615 int tag_name, tag_value;
1616 /* First operand is the tag name, second is the tag value e.g.
1617 ".mspabi_attribute 4, 2". */
1618 input_line_pointer = extract_operand (input_line_pointer, tag_name_s, 32);
1619 input_line_pointer = extract_operand (input_line_pointer, tag_value_s, 32);
1620 tag_name = atoi (tag_name_s);
1621 tag_value = atoi (tag_value_s);
1622 /* If the attribute directive is present, the tag_value should never be set
1623 to 0. */
1624 if (tag_name == 0 || tag_value == 0)
1625 as_bad (_("bad arguments \"%s\" and/or \"%s\" in %s directive"),
1626 tag_name_s, tag_value_s, (attr_type ? ".gnu_attribute"
1627 : ".mspabi_attribute"));
1628 else if (attr_type == 0)
1629 /* Handle .mspabi_attribute. */
1630 switch (tag_name)
1631 {
1632 case OFBA_MSPABI_Tag_ISA:
1633 switch (tag_value)
1634 {
1635 case OFBA_MSPABI_Val_ISA_MSP430:
1636 if (target_is_430x ())
1637 as_bad (_("file was compiled for the 430 ISA but the %s ISA is "
1638 "selected"), (target_is_430xv2 () ? "430X" : "430Xv2"));
1639 break;
1640 case OFBA_MSPABI_Val_ISA_MSP430X:
1641 if (!target_is_430x ())
1642 as_bad (_("file was compiled for the 430X ISA but the 430 ISA is "
1643 "selected"));
1644 break;
1645 default:
1646 as_bad (_("unknown MSPABI build attribute value '%d' for "
1647 "OFBA_MSPABI_Tag_ISA(%d) in .mspabi_attribute directive"),
1648 tag_value, OFBA_MSPABI_Tag_ISA);
1649 break;
1650 }
1651 break;
1652 case OFBA_MSPABI_Tag_Code_Model:
1653 /* Fall through. */
1654 case OFBA_MSPABI_Tag_Data_Model:
1655 /* FIXME: Might we want to set the memory model to large if the assembly
1656 file has the large model attribute, but -ml has not been passed? */
1657 switch (tag_value)
1658 {
1659 case OFBA_MSPABI_Val_Code_Model_SMALL:
1660 if (large_model)
1661 as_bad (_("file was compiled for the small memory model, but the "
1662 "large memory model is selected"));
1663 break;
1664 case OFBA_MSPABI_Val_Code_Model_LARGE:
1665 if (!large_model)
1666 as_bad (_("file was compiled for the large memory model, "
1667 "but the small memory model is selected"));
1668 break;
1669 default:
1670 as_bad (_("unknown MSPABI build attribute value '%d' for %s(%d) "
1671 "in .mspabi_attribute directive"), tag_value,
1672 (tag_name == OFBA_MSPABI_Tag_Code_Model
1673 ? "OFBA_MSPABI_Tag_Code_Model"
1674 : "OFBA_MSPABI_Tag_Data_Model"),
1675 (tag_name == OFBA_MSPABI_Tag_Code_Model
1676 ? OFBA_MSPABI_Tag_Code_Model
1677 : OFBA_MSPABI_Tag_Data_Model));
1678 break;
1679 }
1680 break;
1681 default:
1682 as_bad (_("unknown MSPABI build attribute tag '%d' in "
1683 ".mspabi_attribute directive"), tag_name);
1684 break;
1685 }
1686 else if (attr_type == 1)
1687 /* Handle .gnu_attribute. */
1688 switch (tag_name)
1689 {
1690 case Tag_GNU_MSP430_Data_Region:
1691 /* This attribute is only applicable in the large memory model. */
1692 if (!large_model)
1693 break;
1694 switch (tag_value)
1695 {
1696 case Val_GNU_MSP430_Data_Region_Lower:
1697 if (!lower_data_region_only)
1698 as_bad (_("file was compiled assuming all data will be in the "
1699 "lower memory region, but the upper region is in use"));
1700 break;
1701 case Val_GNU_MSP430_Data_Region_Any:
1702 if (lower_data_region_only)
1703 as_bad (_("file was compiled assuming data could be in the upper "
1704 "memory region, but the lower data region is "
1705 "exclusively in use"));
1706 break;
1707 default:
1708 as_bad (_("unknown GNU build attribute value '%d' for "
1709 "Tag_GNU_MSP430_Data_Region(%d) in .gnu_attribute "
1710 "directive"), tag_value, Tag_GNU_MSP430_Data_Region);
1711 }
1712 }
1713 else
1714 as_bad (_("internal: unexpected argument '%d' to msp430_object_attribute"),
1715 attr_type);
1716 }
1717
1718 const pseudo_typeS md_pseudo_table[] =
1719 {
1720 {"arch", msp430_set_arch, OPTION_MMCU},
1721 {"cpu", msp430_set_arch, OPTION_MCPU},
1722 {"profiler", msp430_profiler, 0},
1723 {"section", msp430_section, 0},
1724 {"section.s", msp430_section, 0},
1725 {"sect", msp430_section, 0},
1726 {"sect.s", msp430_section, 0},
1727 {"pushsection", msp430_section, 1},
1728 {"refsym", msp430_refsym, 0},
1729 {"comm", msp430_comm, 0},
1730 {"lcomm", msp430_lcomm, 0},
1731 {"mspabi_attribute", msp430_object_attribute, 0},
1732 {"gnu_attribute", msp430_object_attribute, 1},
1733 {NULL, NULL, 0}
1734 };
1735
1736 const char *md_shortopts = "mm:,mP,mQ,ml,mN,mn,my,mY,mu,mU";
1737
1738 struct option md_longopts[] =
1739 {
1740 {"msilicon-errata", required_argument, NULL, OPTION_SILICON_ERRATA},
1741 {"msilicon-errata-warn", required_argument, NULL, OPTION_SILICON_ERRATA_WARN},
1742 {"mmcu", required_argument, NULL, OPTION_MMCU},
1743 {"mcpu", required_argument, NULL, OPTION_MCPU},
1744 {"mP", no_argument, NULL, OPTION_POLYMORPHS},
1745 {"mQ", no_argument, NULL, OPTION_RELAX},
1746 {"ml", no_argument, NULL, OPTION_LARGE},
1747 {"mN", no_argument, NULL, OPTION_NO_INTR_NOPS},
1748 {"mn", no_argument, NULL, OPTION_INTR_NOPS},
1749 {"mY", no_argument, NULL, OPTION_NO_WARN_INTR_NOPS},
1750 {"my", no_argument, NULL, OPTION_WARN_INTR_NOPS},
1751 {"mu", no_argument, NULL, OPTION_UNKNOWN_INTR_NOPS},
1752 {"mU", no_argument, NULL, OPTION_NO_UNKNOWN_INTR_NOPS},
1753 {"mdata-region", required_argument, NULL, OPTION_DATA_REGION},
1754 {NULL, no_argument, NULL, 0}
1755 };
1756
1757 size_t md_longopts_size = sizeof (md_longopts);
1758
1759 void
md_show_usage(FILE * stream)1760 md_show_usage (FILE * stream)
1761 {
1762 fprintf (stream,
1763 _("MSP430 options:\n"
1764 " -mmcu=<msp430-name> - select microcontroller type\n"
1765 " -mcpu={430|430x|430xv2} - select microcontroller architecture\n"));
1766 fprintf (stream,
1767 _(" -msilicon-errata=<name>[,<name>...] - enable fixups for silicon errata\n"
1768 " -msilicon-errata-warn=<name>[,<name>...] - warn when a fixup might be needed\n"
1769 " supported errata names: cpu4, cpu8, cpu11, cpu12, cpu13, cpu19\n"));
1770 fprintf (stream,
1771 _(" -mQ - enable relaxation at assembly time. DANGEROUS!\n"
1772 " -mP - enable polymorph instructions\n"));
1773 fprintf (stream,
1774 _(" -ml - enable large code model\n"));
1775 fprintf (stream,
1776 _(" -mN - do not insert NOPs after changing interrupts (default)\n"));
1777 fprintf (stream,
1778 _(" -mn - insert a NOP after changing interrupts\n"));
1779 fprintf (stream,
1780 _(" -mY - do not warn about missing NOPs after changing interrupts\n"));
1781 fprintf (stream,
1782 _(" -my - warn about missing NOPs after changing interrupts (default)\n"));
1783 fprintf (stream,
1784 _(" -mU - for an instruction which changes interrupt state, but where it is not\n"
1785 " known how the state is changed, do not warn/insert NOPs\n"));
1786 fprintf (stream,
1787 _(" -mu - for an instruction which changes interrupt state, but where it is not\n"
1788 " known how the state is changed, warn/insert NOPs (default)\n"
1789 " -mn and/or -my are required for this to have any effect\n"));
1790 fprintf (stream,
1791 _(" -mdata-region={none|lower|upper|either} - select region data will be\n"
1792 " placed in.\n"));
1793 }
1794
1795 symbolS *
md_undefined_symbol(char * name ATTRIBUTE_UNUSED)1796 md_undefined_symbol (char * name ATTRIBUTE_UNUSED)
1797 {
1798 return NULL;
1799 }
1800
1801 static char *
extract_cmd(char * from,char * to,int limit)1802 extract_cmd (char * from, char * to, int limit)
1803 {
1804 int size = 0;
1805
1806 while (*from && ! ISSPACE (*from) && *from != '.' && limit > size)
1807 {
1808 *(to + size) = *from;
1809 from++;
1810 size++;
1811 }
1812
1813 *(to + size) = 0;
1814
1815 return from;
1816 }
1817
1818 const char *
md_atof(int type,char * litP,int * sizeP)1819 md_atof (int type, char * litP, int * sizeP)
1820 {
1821 return ieee_md_atof (type, litP, sizeP, FALSE);
1822 }
1823
1824 void
md_begin(void)1825 md_begin (void)
1826 {
1827 struct msp430_opcode_s * opcode;
1828 msp430_hash = str_htab_create ();
1829
1830 for (opcode = msp430_opcodes; opcode->name; opcode++)
1831 str_hash_insert (msp430_hash, opcode->name, opcode, 0);
1832
1833 bfd_set_arch_mach (stdoutput, TARGET_ARCH,
1834 target_is_430x () ? bfd_mach_msp430x : bfd_mach_msp11);
1835
1836 /* Set linkrelax here to avoid fixups in most sections. */
1837 linkrelax = 1;
1838 }
1839
1840 static inline bfd_boolean
is_regname_end(char c)1841 is_regname_end (char c)
1842 {
1843 return (c == 0 || ! ISALNUM (c));
1844 }
1845
1846 /* Returns the register number equivalent to the string T.
1847 Returns -1 if there is no such register.
1848 Skips a leading 'r' or 'R' character if there is one.
1849 Handles the register aliases PC and SP. */
1850
1851 static signed int
check_reg(char * t)1852 check_reg (char * t)
1853 {
1854 char * endt;
1855 signed long int val;
1856
1857 if (t == NULL || t[0] == 0)
1858 return -1;
1859
1860 if (*t == 'r' || *t == 'R')
1861 ++t;
1862
1863 if (strncasecmp (t, "pc", 2) == 0 && is_regname_end (t[2]))
1864 return 0;
1865
1866 if (strncasecmp (t, "sp", 2) == 0 && is_regname_end (t[2]))
1867 return 1;
1868
1869 if (strncasecmp (t, "sr", 2) == 0 && is_regname_end (t[2]))
1870 return 2;
1871
1872 if (*t == '0' && is_regname_end (t[1]))
1873 return 0;
1874
1875 val = strtol (t, & endt, 0);
1876
1877 if (val < 1 || val > 15)
1878 return -1;
1879
1880 if (is_regname_end (*endt))
1881 return val;
1882
1883 return -1;
1884 }
1885
1886 static int
msp430_srcoperand(struct msp430_operand_s * op,char * l,int bin,bfd_boolean * imm_op,bfd_boolean allow_20bit_values,bfd_boolean constants_allowed)1887 msp430_srcoperand (struct msp430_operand_s * op,
1888 char * l,
1889 int bin,
1890 bfd_boolean * imm_op,
1891 bfd_boolean allow_20bit_values,
1892 bfd_boolean constants_allowed)
1893 {
1894 char * end;
1895 char *__tl = l;
1896
1897 /* Check if an immediate #VALUE. The hash sign should be only at the beginning! */
1898 if (*l == '#')
1899 {
1900 char *h = l;
1901 int vshift = -1;
1902 int rval = 0;
1903 /* Use all parts of the constant expression by default. */
1904 enum msp430_expp_e expp = MSP_EXPP_ALL;
1905
1906 /* Check if there is:
1907 llo(x) - least significant 16 bits, x &= 0xffff
1908 lhi(x) - x = (x >> 16) & 0xffff,
1909 hlo(x) - x = (x >> 32) & 0xffff,
1910 hhi(x) - x = (x >> 48) & 0xffff
1911 The value _MUST_ be an immediate expression: #hlo(1231231231). */
1912
1913 *imm_op = TRUE;
1914
1915 if (strncasecmp (h, "#llo(", 5) == 0)
1916 {
1917 vshift = 0;
1918 rval = 3;
1919 expp = MSP_EXPP_LLO;
1920 }
1921 else if (strncasecmp (h, "#lhi(", 5) == 0)
1922 {
1923 vshift = 1;
1924 rval = 3;
1925 expp = MSP_EXPP_LHI;
1926 }
1927 else if (strncasecmp (h, "#hlo(", 5) == 0)
1928 {
1929 vshift = 2;
1930 rval = 3;
1931 expp = MSP_EXPP_HLO;
1932 }
1933 else if (strncasecmp (h, "#hhi(", 5) == 0)
1934 {
1935 vshift = 3;
1936 rval = 3;
1937 expp = MSP_EXPP_HHI;
1938 }
1939 else if (strncasecmp (h, "#lo(", 4) == 0)
1940 {
1941 vshift = 0;
1942 rval = 2;
1943 expp = MSP_EXPP_LO;
1944 }
1945 else if (strncasecmp (h, "#hi(", 4) == 0)
1946 {
1947 vshift = 1;
1948 rval = 2;
1949 expp = MSP_EXPP_HI;
1950 }
1951
1952 op->reg = 0; /* Reg PC. */
1953 op->am = 3;
1954 op->ol = 1; /* Immediate will follow an instruction. */
1955 __tl = h + 1 + rval;
1956 op->mode = OP_EXP;
1957 op->vshift = vshift;
1958 op->expp = expp;
1959
1960 end = parse_exp (__tl, &(op->exp));
1961 if (end != NULL && *end != 0 && *end != ')' )
1962 {
1963 as_bad (_("extra characters '%s' at end of immediate expression '%s'"), end, l);
1964 return 1;
1965 }
1966 if (op->exp.X_op == O_constant)
1967 {
1968 int x = op->exp.X_add_number;
1969
1970 if (vshift == 0)
1971 {
1972 x = x & 0xffff;
1973 op->exp.X_add_number = x;
1974 }
1975 else if (vshift == 1)
1976 {
1977 x = (x >> 16) & 0xffff;
1978 op->exp.X_add_number = x;
1979 op->vshift = 0;
1980 }
1981 else if (vshift > 1)
1982 {
1983 if (x < 0)
1984 op->exp.X_add_number = -1;
1985 else
1986 op->exp.X_add_number = 0; /* Nothing left. */
1987 x = op->exp.X_add_number;
1988 op->vshift = 0;
1989 }
1990
1991 if (allow_20bit_values)
1992 {
1993 if (op->exp.X_add_number > 0xfffff || op->exp.X_add_number < -524288)
1994 {
1995 as_bad (_("value 0x%x out of extended range."), x);
1996 return 1;
1997 }
1998 }
1999 else if (op->exp.X_add_number > 65535 || op->exp.X_add_number < -32768)
2000 {
2001 as_bad (_("value %d out of range. Use #lo() or #hi()"), x);
2002 return 1;
2003 }
2004
2005 /* Now check constants. */
2006 /* Substitute register mode with a constant generator if applicable. */
2007
2008 if (!allow_20bit_values)
2009 x = (short) x; /* Extend sign. */
2010
2011 if (! constants_allowed)
2012 ;
2013 else if (x == 0)
2014 {
2015 op->reg = 3;
2016 op->am = 0;
2017 op->ol = 0;
2018 op->mode = OP_REG;
2019 }
2020 else if (x == 1)
2021 {
2022 op->reg = 3;
2023 op->am = 1;
2024 op->ol = 0;
2025 op->mode = OP_REG;
2026 }
2027 else if (x == 2)
2028 {
2029 op->reg = 3;
2030 op->am = 2;
2031 op->ol = 0;
2032 op->mode = OP_REG;
2033 }
2034 else if (x == -1)
2035 {
2036 op->reg = 3;
2037 op->am = 3;
2038 op->ol = 0;
2039 op->mode = OP_REG;
2040 }
2041 else if (x == 4)
2042 {
2043 if (bin == 0x1200 && ! target_is_430x ())
2044 {
2045 /* CPU4: The shorter form of PUSH #4 is not supported on MSP430. */
2046 if (silicon_errata_warn & SILICON_ERRATA_CPU4)
2047 as_warn (_("cpu4: not converting PUSH #4 to shorter form"));
2048 /* No need to check silicon_errata_fixes - this fix is always implemented. */
2049 }
2050 else
2051 {
2052 op->reg = 2;
2053 op->am = 2;
2054 op->ol = 0;
2055 op->mode = OP_REG;
2056 }
2057 }
2058 else if (x == 8)
2059 {
2060 if (bin == 0x1200 && ! target_is_430x ())
2061 {
2062 /* CPU4: The shorter form of PUSH #8 is not supported on MSP430. */
2063 if (silicon_errata_warn & SILICON_ERRATA_CPU4)
2064 as_warn (_("cpu4: not converting PUSH #8 to shorter form"));
2065 }
2066 else
2067 {
2068 op->reg = 2;
2069 op->am = 3;
2070 op->ol = 0;
2071 op->mode = OP_REG;
2072 }
2073 }
2074 }
2075 else if (op->exp.X_op == O_symbol)
2076 {
2077 if (vshift > 1)
2078 as_bad (_("error: unsupported #foo() directive used on symbol"));
2079 op->mode = OP_EXP;
2080 }
2081 else if (op->exp.X_op == O_big)
2082 {
2083 short x;
2084
2085 if (vshift != -1)
2086 {
2087 op->exp.X_op = O_constant;
2088 op->exp.X_add_number = 0xffff & generic_bignum[vshift];
2089 x = op->exp.X_add_number;
2090 op->vshift = 0;
2091 }
2092 else
2093 {
2094 as_bad (_
2095 ("unknown expression in operand %s. Use #llo(), #lhi(), #hlo() or #hhi()"),
2096 l);
2097 return 1;
2098 }
2099
2100 if (x == 0)
2101 {
2102 op->reg = 3;
2103 op->am = 0;
2104 op->ol = 0;
2105 op->mode = OP_REG;
2106 }
2107 else if (x == 1)
2108 {
2109 op->reg = 3;
2110 op->am = 1;
2111 op->ol = 0;
2112 op->mode = OP_REG;
2113 }
2114 else if (x == 2)
2115 {
2116 op->reg = 3;
2117 op->am = 2;
2118 op->ol = 0;
2119 op->mode = OP_REG;
2120 }
2121 else if (x == -1)
2122 {
2123 op->reg = 3;
2124 op->am = 3;
2125 op->ol = 0;
2126 op->mode = OP_REG;
2127 }
2128 else if (x == 4)
2129 {
2130 op->reg = 2;
2131 op->am = 2;
2132 op->ol = 0;
2133 op->mode = OP_REG;
2134 }
2135 else if (x == 8)
2136 {
2137 op->reg = 2;
2138 op->am = 3;
2139 op->ol = 0;
2140 op->mode = OP_REG;
2141 }
2142 }
2143 /* Redundant (yet) check. */
2144 else if (op->exp.X_op == O_register)
2145 as_bad
2146 (_("Registers cannot be used within immediate expression [%s]"), l);
2147 else
2148 as_bad (_("unknown operand %s"), l);
2149
2150 return 0;
2151 }
2152
2153 /* Check if absolute &VALUE (assume that we can construct something like ((a&b)<<7 + 25). */
2154 if (*l == '&')
2155 {
2156 char *h = l;
2157
2158 op->reg = 2; /* Reg 2 in absolute addr mode. */
2159 op->am = 1; /* Mode As == 01 bin. */
2160 op->ol = 1; /* Immediate value followed by instruction. */
2161 __tl = h + 1;
2162 end = parse_exp (__tl, &(op->exp));
2163 if (end != NULL && *end != 0)
2164 {
2165 as_bad (_("extra characters '%s' at the end of absolute operand '%s'"), end, l);
2166 return 1;
2167 }
2168 op->mode = OP_EXP;
2169 op->vshift = 0;
2170 op->expp = MSP_EXPP_ALL;
2171 if (op->exp.X_op == O_constant)
2172 {
2173 int x = op->exp.X_add_number;
2174
2175 if (allow_20bit_values)
2176 {
2177 if (x > 0xfffff || x < -(0x7ffff))
2178 {
2179 as_bad (_("value 0x%x out of extended range."), x);
2180 return 1;
2181 }
2182 }
2183 else if (x > 65535 || x < -32768)
2184 {
2185 as_bad (_("value out of range: 0x%x"), x);
2186 return 1;
2187 }
2188 }
2189 else if (op->exp.X_op == O_symbol)
2190 ;
2191 else
2192 {
2193 /* Redundant (yet) check. */
2194 if (op->exp.X_op == O_register)
2195 as_bad
2196 (_("Registers cannot be used within absolute expression [%s]"), l);
2197 else
2198 as_bad (_("unknown expression in operand %s"), l);
2199 return 1;
2200 }
2201 return 0;
2202 }
2203
2204 /* Check if indirect register mode @Rn / postincrement @Rn+. */
2205 if (*l == '@')
2206 {
2207 char *t = l;
2208 char *m = strchr (l, '+');
2209
2210 if (t != l)
2211 {
2212 as_bad (_("unknown addressing mode %s"), l);
2213 return 1;
2214 }
2215
2216 t++;
2217
2218 if ((op->reg = check_reg (t)) == -1)
2219 {
2220 as_bad (_("Bad register name %s"), t);
2221 return 1;
2222 }
2223
2224 op->mode = OP_REG;
2225 op->am = m ? 3 : 2;
2226 op->ol = 0;
2227
2228 /* PC cannot be used in indirect addressing. */
2229 if (target_is_430xv2 () && op->reg == 0)
2230 {
2231 as_bad (_("cannot use indirect addressing with the PC"));
2232 return 1;
2233 }
2234
2235 return 0;
2236 }
2237
2238 /* Check if register indexed X(Rn). */
2239 do
2240 {
2241 char *h = strrchr (l, '(');
2242 char *m = strrchr (l, ')');
2243 char *t;
2244
2245 *imm_op = TRUE;
2246
2247 if (!h)
2248 break;
2249 if (!m)
2250 {
2251 as_bad (_("')' required"));
2252 return 1;
2253 }
2254
2255 t = h;
2256 op->am = 1;
2257 op->ol = 1;
2258
2259 /* Extract a register. */
2260 if ((op->reg = check_reg (t + 1)) == -1)
2261 {
2262 as_bad (_
2263 ("unknown operator %s. Did you mean X(Rn) or #[hl][hl][oi](CONST) ?"),
2264 l);
2265 return 1;
2266 }
2267
2268 if (op->reg == 2)
2269 {
2270 as_bad (_("r2 should not be used in indexed addressing mode"));
2271 return 1;
2272 }
2273
2274 /* Extract constant. */
2275 __tl = l;
2276 *h = 0;
2277 op->mode = OP_EXP;
2278 op->vshift = 0;
2279 op->expp = MSP_EXPP_ALL;
2280 end = parse_exp (__tl, &(op->exp));
2281 if (end != NULL && *end != 0)
2282 {
2283 as_bad (_("extra characters '%s' at end of operand '%s'"), end, l);
2284 return 1;
2285 }
2286 if (op->exp.X_op == O_constant)
2287 {
2288 int x = op->exp.X_add_number;
2289
2290 if (allow_20bit_values)
2291 {
2292 if (x > 0xfffff || x < - (0x7ffff))
2293 {
2294 as_bad (_("value 0x%x out of extended range."), x);
2295 return 1;
2296 }
2297 }
2298 else if (x > 65535 || x < -32768)
2299 {
2300 as_bad (_("value out of range: 0x%x"), x);
2301 return 1;
2302 }
2303
2304 if (x == 0)
2305 {
2306 op->mode = OP_REG;
2307 op->am = 2;
2308 op->ol = 0;
2309 return 0;
2310 }
2311
2312 if (op->reg == 1 && (x & 1))
2313 {
2314 if (silicon_errata_fix & SILICON_ERRATA_CPU8)
2315 as_bad (_("CPU8: Stack pointer accessed with an odd offset"));
2316 else if (silicon_errata_warn & SILICON_ERRATA_CPU8)
2317 as_warn (_("CPU8: Stack pointer accessed with an odd offset"));
2318 }
2319 }
2320 else if (op->exp.X_op == O_symbol)
2321 ;
2322 else
2323 {
2324 /* Redundant (yet) check. */
2325 if (op->exp.X_op == O_register)
2326 as_bad
2327 (_("Registers cannot be used as a prefix of indexed expression [%s]"), l);
2328 else
2329 as_bad (_("unknown expression in operand %s"), l);
2330 return 1;
2331 }
2332
2333 return 0;
2334 }
2335 while (0);
2336
2337 /* Possibly register mode 'mov r1,r2'. */
2338 if ((op->reg = check_reg (l)) != -1)
2339 {
2340 op->mode = OP_REG;
2341 op->am = 0;
2342 op->ol = 0;
2343 return 0;
2344 }
2345
2346 /* Symbolic mode 'mov a, b' == 'mov x(pc), y(pc)'. */
2347 op->mode = OP_EXP;
2348 op->reg = 0; /* PC relative... be careful. */
2349 /* An expression starting with a minus sign is a constant, not an address. */
2350 op->am = (*l == '-' ? 3 : 1);
2351 op->ol = 1;
2352 op->vshift = 0;
2353 op->expp = MSP_EXPP_ALL;
2354 __tl = l;
2355 end = parse_exp (__tl, &(op->exp));
2356 if (end != NULL && * end != 0)
2357 {
2358 as_bad (_("extra characters '%s' at end of operand '%s'"), end, l);
2359 return 1;
2360 }
2361 return 0;
2362 }
2363
2364
2365 static int
msp430_dstoperand(struct msp430_operand_s * op,char * l,int bin,bfd_boolean allow_20bit_values,bfd_boolean constants_allowed)2366 msp430_dstoperand (struct msp430_operand_s * op,
2367 char * l,
2368 int bin,
2369 bfd_boolean allow_20bit_values,
2370 bfd_boolean constants_allowed)
2371 {
2372 int dummy;
2373 int ret = msp430_srcoperand (op, l, bin, & dummy,
2374 allow_20bit_values,
2375 constants_allowed);
2376
2377 if (ret)
2378 return ret;
2379
2380 if (op->am == 2)
2381 {
2382 char *__tl = (char *) "0";
2383
2384 op->mode = OP_EXP;
2385 op->am = 1;
2386 op->ol = 1;
2387 op->vshift = 0;
2388 op->expp = MSP_EXPP_ALL;
2389 (void) parse_exp (__tl, &(op->exp));
2390
2391 if (op->exp.X_op != O_constant || op->exp.X_add_number != 0)
2392 {
2393 as_bad (_("Internal bug. Try to use 0(r%d) instead of @r%d"),
2394 op->reg, op->reg);
2395 return 1;
2396 }
2397 return 0;
2398 }
2399
2400 if (op->am > 1)
2401 {
2402 as_bad (_
2403 ("this addressing mode is not applicable for destination operand"));
2404 return 1;
2405 }
2406 return 0;
2407 }
2408
2409 /* Attempt to encode a MOVA instruction with the given operands.
2410 Returns the length of the encoded instruction if successful
2411 or 0 upon failure. If the encoding fails, an error message
2412 will be returned if a pointer is provided. */
2413
2414 static int
try_encode_mova(bfd_boolean imm_op,int bin,struct msp430_operand_s * op1,struct msp430_operand_s * op2,const char ** error_message_return)2415 try_encode_mova (bfd_boolean imm_op,
2416 int bin,
2417 struct msp430_operand_s * op1,
2418 struct msp430_operand_s * op2,
2419 const char ** error_message_return)
2420 {
2421 short ZEROS = 0;
2422 char *frag;
2423 int where;
2424
2425 /* Only a restricted subset of the normal MSP430 addressing modes
2426 are supported here, so check for the ones that are allowed. */
2427 if (imm_op)
2428 {
2429 if (op1->mode == OP_EXP)
2430 {
2431 if (op2->mode != OP_REG)
2432 {
2433 if (error_message_return != NULL)
2434 * error_message_return = _("expected register as second argument of %s");
2435 return 0;
2436 }
2437
2438 if (op1->am == 3)
2439 {
2440 /* MOVA #imm20, Rdst. */
2441 bin |= 0x80 | op2->reg;
2442 frag = frag_more (4);
2443 where = frag - frag_now->fr_literal;
2444 if (op1->exp.X_op == O_constant)
2445 {
2446 bin |= ((op1->exp.X_add_number >> 16) & 0xf) << 8;
2447 bfd_putl16 ((bfd_vma) bin, frag);
2448 bfd_putl16 (op1->exp.X_add_number & 0xffff, frag + 2);
2449 }
2450 else
2451 {
2452 bfd_putl16 ((bfd_vma) bin, frag);
2453 fix_new_exp (frag_now, where, 4, &(op1->exp), FALSE,
2454 BFD_RELOC_MSP430X_ABS20_ADR_SRC);
2455 bfd_putl16 ((bfd_vma) ZEROS, frag + 2);
2456 }
2457
2458 return 4;
2459 }
2460 else if (op1->am == 1)
2461 {
2462 /* MOVA z16(Rsrc), Rdst. */
2463 bin |= 0x30 | (op1->reg << 8) | op2->reg;
2464 frag = frag_more (4);
2465 where = frag - frag_now->fr_literal;
2466 bfd_putl16 ((bfd_vma) bin, frag);
2467 if (op1->exp.X_op == O_constant)
2468 {
2469 if (op1->exp.X_add_number > 0xffff
2470 || op1->exp.X_add_number < -(0x7fff))
2471 {
2472 if (error_message_return != NULL)
2473 * error_message_return = _("index value too big for %s");
2474 return 0;
2475 }
2476 bfd_putl16 (op1->exp.X_add_number & 0xffff, frag + 2);
2477 }
2478 else
2479 {
2480 bfd_putl16 ((bfd_vma) ZEROS, frag + 2);
2481 fix_new_exp (frag_now, where + 2, 2, &(op1->exp), FALSE,
2482 op1->reg == 0 ?
2483 BFD_RELOC_MSP430X_PCR16 :
2484 BFD_RELOC_MSP430X_ABS16);
2485 }
2486 return 4;
2487 }
2488
2489 if (error_message_return != NULL)
2490 * error_message_return = _("unexpected addressing mode for %s");
2491 return 0;
2492 }
2493 else if (op1->am == 0)
2494 {
2495 /* MOVA Rsrc, ... */
2496 if (op2->mode == OP_REG)
2497 {
2498 bin |= 0xc0 | (op1->reg << 8) | op2->reg;
2499 frag = frag_more (2);
2500 where = frag - frag_now->fr_literal;
2501 bfd_putl16 ((bfd_vma) bin, frag);
2502 return 2;
2503 }
2504 else if (op2->am == 1)
2505 {
2506 if (op2->reg == 2)
2507 {
2508 /* MOVA Rsrc, &abs20. */
2509 bin |= 0x60 | (op1->reg << 8);
2510 frag = frag_more (4);
2511 where = frag - frag_now->fr_literal;
2512 if (op2->exp.X_op == O_constant)
2513 {
2514 bin |= (op2->exp.X_add_number >> 16) & 0xf;
2515 bfd_putl16 ((bfd_vma) bin, frag);
2516 bfd_putl16 (op2->exp.X_add_number & 0xffff, frag + 2);
2517 }
2518 else
2519 {
2520 bfd_putl16 ((bfd_vma) bin, frag);
2521 bfd_putl16 ((bfd_vma) ZEROS, frag + 2);
2522 fix_new_exp (frag_now, where, 4, &(op2->exp), FALSE,
2523 BFD_RELOC_MSP430X_ABS20_ADR_DST);
2524 }
2525 return 4;
2526 }
2527
2528 /* MOVA Rsrc, z16(Rdst). */
2529 bin |= 0x70 | (op1->reg << 8) | op2->reg;
2530 frag = frag_more (4);
2531 where = frag - frag_now->fr_literal;
2532 bfd_putl16 ((bfd_vma) bin, frag);
2533 if (op2->exp.X_op == O_constant)
2534 {
2535 if (op2->exp.X_add_number > 0xffff
2536 || op2->exp.X_add_number < -(0x7fff))
2537 {
2538 if (error_message_return != NULL)
2539 * error_message_return = _("index value too big for %s");
2540 return 0;
2541 }
2542 bfd_putl16 (op2->exp.X_add_number & 0xffff, frag + 2);
2543 }
2544 else
2545 {
2546 bfd_putl16 ((bfd_vma) ZEROS, frag + 2);
2547 fix_new_exp (frag_now, where + 2, 2, &(op2->exp), FALSE,
2548 op2->reg == 0 ?
2549 BFD_RELOC_MSP430X_PCR16 :
2550 BFD_RELOC_MSP430X_ABS16);
2551 }
2552 return 4;
2553 }
2554
2555 if (error_message_return != NULL)
2556 * error_message_return = _("unexpected addressing mode for %s");
2557 return 0;
2558 }
2559 }
2560
2561 /* imm_op == FALSE. */
2562
2563 if (op1->reg == 2 && op1->am == 1 && op1->mode == OP_EXP)
2564 {
2565 /* MOVA &abs20, Rdst. */
2566 if (op2->mode != OP_REG)
2567 {
2568 if (error_message_return != NULL)
2569 * error_message_return = _("expected register as second argument of %s");
2570 return 0;
2571 }
2572
2573 if (op2->reg == 2 || op2->reg == 3)
2574 {
2575 if (error_message_return != NULL)
2576 * error_message_return = _("constant generator destination register found in %s");
2577 return 0;
2578 }
2579
2580 bin |= 0x20 | op2->reg;
2581 frag = frag_more (4);
2582 where = frag - frag_now->fr_literal;
2583 if (op1->exp.X_op == O_constant)
2584 {
2585 bin |= ((op1->exp.X_add_number >> 16) & 0xf) << 8;
2586 bfd_putl16 ((bfd_vma) bin, frag);
2587 bfd_putl16 (op1->exp.X_add_number & 0xffff, frag + 2);
2588 }
2589 else
2590 {
2591 bfd_putl16 ((bfd_vma) bin, frag);
2592 bfd_putl16 ((bfd_vma) ZEROS, frag + 2);
2593 fix_new_exp (frag_now, where, 4, &(op1->exp), FALSE,
2594 BFD_RELOC_MSP430X_ABS20_ADR_SRC);
2595 }
2596 return 4;
2597 }
2598 else if (op1->mode == OP_REG)
2599 {
2600 if (op1->am == 3)
2601 {
2602 /* MOVA @Rsrc+, Rdst. */
2603 if (op2->mode != OP_REG)
2604 {
2605 if (error_message_return != NULL)
2606 * error_message_return = _("expected register as second argument of %s");
2607 return 0;
2608 }
2609
2610 if (op2->reg == 2 || op2->reg == 3)
2611 {
2612 if (error_message_return != NULL)
2613 * error_message_return = _("constant generator destination register found in %s");
2614 return 0;
2615 }
2616
2617 if (op1->reg == 2 || op1->reg == 3)
2618 {
2619 if (error_message_return != NULL)
2620 * error_message_return = _("constant generator source register found in %s");
2621 return 0;
2622 }
2623
2624 bin |= 0x10 | (op1->reg << 8) | op2->reg;
2625 frag = frag_more (2);
2626 where = frag - frag_now->fr_literal;
2627 bfd_putl16 ((bfd_vma) bin, frag);
2628 return 2;
2629 }
2630 else if (op1->am == 2)
2631 {
2632 /* MOVA @Rsrc,Rdst */
2633 if (op2->mode != OP_REG)
2634 {
2635 if (error_message_return != NULL)
2636 * error_message_return = _("expected register as second argument of %s");
2637 return 0;
2638 }
2639
2640 if (op2->reg == 2 || op2->reg == 3)
2641 {
2642 if (error_message_return != NULL)
2643 * error_message_return = _("constant generator destination register found in %s");
2644 return 0;
2645 }
2646
2647 if (op1->reg == 2 || op1->reg == 3)
2648 {
2649 if (error_message_return != NULL)
2650 * error_message_return = _("constant generator source register found in %s");
2651 return 0;
2652 }
2653
2654 bin |= (op1->reg << 8) | op2->reg;
2655 frag = frag_more (2);
2656 where = frag - frag_now->fr_literal;
2657 bfd_putl16 ((bfd_vma) bin, frag);
2658 return 2;
2659 }
2660 }
2661
2662 if (error_message_return != NULL)
2663 * error_message_return = _("unexpected addressing mode for %s");
2664
2665 return 0;
2666 }
2667
2668 #define NOP_CHECK_INTERRUPT (1 << 0)
2669 #define NOP_CHECK_CPU12 (1 << 1)
2670 #define NOP_CHECK_CPU19 (1 << 2)
2671
2672 static signed int check_for_nop = 0;
2673
2674 #define is_opcode(NAME) (strcmp (opcode->name, NAME) == 0)
2675
2676 /* is_{e,d}int only check the explicit enabling/disabling of interrupts.
2677 For MOV insns, more sophisticated processing is needed to determine if they
2678 result in enabling/disabling interrupts. */
2679 #define is_dint(OPCODE, BIN) ((strcmp (OPCODE, "dint") == 0) \
2680 || ((strcmp (OPCODE, "bic") == 0) \
2681 && BIN == 0xc232) \
2682 || ((strcmp (OPCODE, "clr") == 0) \
2683 && BIN == 0x4302))
2684
2685 #define is_eint(OPCODE, BIN) ((strcmp (OPCODE, "eint") == 0) \
2686 || ((strcmp (OPCODE, "bis") == 0) \
2687 && BIN == 0xd232))
2688
2689 const char * const INSERT_NOP_BEFORE_EINT = "NOP inserted here, before an interrupt enable instruction";
2690 const char * const INSERT_NOP_AFTER_DINT = "NOP inserted here, after an interrupt disable instruction";
2691 const char * const INSERT_NOP_AFTER_EINT = "NOP inserted here, after an interrupt enable instruction";
2692 const char * const INSERT_NOP_BEFORE_UNKNOWN = "NOP inserted here, before this interrupt state change";
2693 const char * const INSERT_NOP_AFTER_UNKNOWN ="NOP inserted here, after the instruction that changed interrupt state";
2694 const char * const INSERT_NOP_AT_EOF = "NOP inserted after the interrupt state change at the end of the file";
2695
2696 const char * const WARN_NOP_BEFORE_EINT = "a NOP might be needed here, before an interrupt enable instruction";
2697 const char * const WARN_NOP_AFTER_DINT = "a NOP might be needed here, after an interrupt disable instruction";
2698 const char * const WARN_NOP_AFTER_EINT = "a NOP might be needed here, after an interrupt enable instruction";
2699 const char * const WARN_NOP_BEFORE_UNKNOWN = "a NOP might be needed here, before this interrupt state change";
2700 const char * const WARN_NOP_AFTER_UNKNOWN = "a NOP might also be needed here, after the instruction that changed interrupt state";
2701 const char * const WARN_NOP_AT_EOF = "a NOP might be needed after the interrupt state change at the end of the file";
2702
2703 static void
gen_nop(void)2704 gen_nop (void)
2705 {
2706 char *frag;
2707 frag = frag_more (2);
2708 bfd_putl16 ((bfd_vma) 0x4303 /* NOP */, frag);
2709 dwarf2_emit_insn (2);
2710 }
2711
2712 /* Insert/inform about adding a NOP if this insn enables interrupts. */
2713
2714 static void
warn_eint_nop(bfd_boolean prev_insn_is_nop,bfd_boolean prev_insn_is_dint)2715 warn_eint_nop (bfd_boolean prev_insn_is_nop, bfd_boolean prev_insn_is_dint)
2716 {
2717 if (prev_insn_is_nop
2718 /* If the last insn was a DINT, we will have already warned that a NOP is
2719 required after it. */
2720 || prev_insn_is_dint
2721 /* 430 ISA does not require a NOP before EINT. */
2722 || (! target_is_430x ()))
2723 return;
2724
2725 if (gen_interrupt_nops)
2726 {
2727 gen_nop ();
2728 if (warn_interrupt_nops)
2729 as_warn (_(INSERT_NOP_BEFORE_EINT));
2730 }
2731 else if (warn_interrupt_nops)
2732 as_warn (_(WARN_NOP_BEFORE_EINT));
2733 }
2734
2735 /* Use when unsure what effect the insn will have on the interrupt status,
2736 to insert/warn about adding a NOP before the current insn. */
2737
2738 static void
warn_unsure_interrupt(bfd_boolean prev_insn_is_nop,bfd_boolean prev_insn_is_dint)2739 warn_unsure_interrupt (bfd_boolean prev_insn_is_nop,
2740 bfd_boolean prev_insn_is_dint)
2741 {
2742 if (prev_insn_is_nop
2743 /* If the last insn was a DINT, we will have already warned that a NOP is
2744 required after it. */
2745 || prev_insn_is_dint
2746 /* 430 ISA does not require a NOP before EINT or DINT. */
2747 || (! target_is_430x ()))
2748 return;
2749
2750 if (gen_interrupt_nops)
2751 {
2752 gen_nop ();
2753 if (warn_interrupt_nops)
2754 as_warn (_(INSERT_NOP_BEFORE_UNKNOWN));
2755 }
2756 else if (warn_interrupt_nops)
2757 as_warn (_(WARN_NOP_BEFORE_UNKNOWN));
2758 }
2759
2760 /* Parse instruction operands.
2761 Return binary opcode. */
2762
2763 static unsigned int
msp430_operands(struct msp430_opcode_s * opcode,char * line)2764 msp430_operands (struct msp430_opcode_s * opcode, char * line)
2765 {
2766 int bin = opcode->bin_opcode; /* Opcode mask. */
2767 int insn_length = 0;
2768 char l1[MAX_OP_LEN], l2[MAX_OP_LEN];
2769 char *frag;
2770 char *end;
2771 int where;
2772 struct msp430_operand_s op1, op2;
2773 int res = 0;
2774 static short ZEROS = 0;
2775 bfd_boolean byte_op, imm_op;
2776 int op_length = 0;
2777 int fmt;
2778 int extended = 0x1800;
2779 bfd_boolean extended_op = FALSE;
2780 bfd_boolean addr_op;
2781 const char * error_message;
2782 static signed int repeat_count = 0;
2783 static bfd_boolean prev_insn_is_nop = FALSE;
2784 static bfd_boolean prev_insn_is_dint = FALSE;
2785 static bfd_boolean prev_insn_is_eint = FALSE;
2786 /* We might decide before the end of the function that the current insn is
2787 equivalent to DINT/EINT. */
2788 bfd_boolean this_insn_is_dint = FALSE;
2789 bfd_boolean this_insn_is_eint = FALSE;
2790 bfd_boolean fix_emitted;
2791
2792 /* Opcode is the one from opcodes table
2793 line contains something like
2794 [.w] @r2+, 5(R1)
2795 or
2796 .b @r2+, 5(R1). */
2797
2798 byte_op = FALSE;
2799 addr_op = FALSE;
2800 if (*line == '.')
2801 {
2802 bfd_boolean check = FALSE;
2803 ++ line;
2804
2805 switch (TOLOWER (* line))
2806 {
2807 case 'b':
2808 /* Byte operation. */
2809 bin |= BYTE_OPERATION;
2810 byte_op = TRUE;
2811 check = TRUE;
2812 break;
2813
2814 case 'a':
2815 /* "Address" ops work on 20-bit values. */
2816 addr_op = TRUE;
2817 bin |= BYTE_OPERATION;
2818 check = TRUE;
2819 break;
2820
2821 case 'w':
2822 /* Word operation - this is the default. */
2823 check = TRUE;
2824 break;
2825
2826 case 0:
2827 case ' ':
2828 case '\n':
2829 case '\r':
2830 as_warn (_("no size modifier after period, .w assumed"));
2831 break;
2832
2833 default:
2834 as_bad (_("unrecognised instruction size modifier .%c"),
2835 * line);
2836 return 0;
2837 }
2838
2839 if (check)
2840 {
2841 ++ line;
2842
2843 }
2844 }
2845
2846 if (*line && ! ISSPACE (*line))
2847 {
2848 as_bad (_("junk found after instruction: %s.%s"),
2849 opcode->name, line);
2850 return 0;
2851 }
2852
2853 /* Catch the case where the programmer has used a ".a" size modifier on an
2854 instruction that does not support it. Look for an alternative extended
2855 instruction that has the same name without the period. Eg: "add.a"
2856 becomes "adda". Although this not an officially supported way of
2857 specifying instruction aliases other MSP430 assemblers allow it. So we
2858 support it for compatibility purposes. */
2859 if (addr_op && opcode->fmt >= 0)
2860 {
2861 const char * old_name = opcode->name;
2862 char real_name[32];
2863
2864 sprintf (real_name, "%sa", old_name);
2865 opcode = str_hash_find (msp430_hash, real_name);
2866 if (opcode == NULL)
2867 {
2868 as_bad (_("instruction %s.a does not exist"), old_name);
2869 return 0;
2870 }
2871 #if 0 /* Enable for debugging. */
2872 as_warn ("treating %s.a as %s", old_name, real_name);
2873 #endif
2874 addr_op = FALSE;
2875 bin = opcode->bin_opcode;
2876 }
2877
2878 if (opcode->fmt != -1
2879 && opcode->insn_opnumb
2880 && (!*line || *line == '\n'))
2881 {
2882 as_bad (ngettext ("instruction %s requires %d operand",
2883 "instruction %s requires %d operands",
2884 opcode->insn_opnumb),
2885 opcode->name, opcode->insn_opnumb);
2886 return 0;
2887 }
2888
2889 memset (l1, 0, sizeof (l1));
2890 memset (l2, 0, sizeof (l2));
2891 memset (&op1, 0, sizeof (op1));
2892 memset (&op2, 0, sizeof (op2));
2893
2894 imm_op = FALSE;
2895
2896 if ((fmt = opcode->fmt) < 0)
2897 {
2898 if (! target_is_430x ())
2899 {
2900 as_bad (_("instruction %s requires MSP430X mcu"),
2901 opcode->name);
2902 return 0;
2903 }
2904
2905 fmt = (-fmt) - 1;
2906 extended_op = TRUE;
2907 }
2908
2909 if (repeat_count)
2910 {
2911 /* If requested set the extended instruction repeat count. */
2912 if (extended_op)
2913 {
2914 if (repeat_count > 0)
2915 extended |= (repeat_count - 1);
2916 else
2917 extended |= (1 << 7) | (- repeat_count);
2918 }
2919 else
2920 as_bad (_("unable to repeat %s insn"), opcode->name);
2921
2922 repeat_count = 0;
2923 }
2924
2925 /* The previous instruction set this flag if it wants to check if this insn
2926 is a NOP. */
2927 if (check_for_nop)
2928 {
2929 if (! is_opcode ("nop"))
2930 {
2931 do
2932 {
2933 switch (check_for_nop & - check_for_nop)
2934 {
2935 case NOP_CHECK_INTERRUPT:
2936 /* NOP_CHECK_INTERRUPT rules:
2937 1. 430 and 430x ISA require a NOP after DINT.
2938 2. Only the 430x ISA requires NOP before EINT (this has
2939 been dealt with in the previous call to this function).
2940 3. Only the 430x ISA requires NOP after every EINT.
2941 CPU42 errata. */
2942 if (gen_interrupt_nops || warn_interrupt_nops)
2943 {
2944 if (prev_insn_is_dint)
2945 {
2946 if (gen_interrupt_nops)
2947 {
2948 gen_nop ();
2949 if (warn_interrupt_nops)
2950 as_warn (_(INSERT_NOP_AFTER_DINT));
2951 }
2952 else
2953 as_warn (_(WARN_NOP_AFTER_DINT));
2954 }
2955 else if (prev_insn_is_eint)
2956 {
2957 if (gen_interrupt_nops)
2958 {
2959 gen_nop ();
2960 if (warn_interrupt_nops)
2961 as_warn (_(INSERT_NOP_AFTER_EINT));
2962 }
2963 else
2964 as_warn (_(WARN_NOP_AFTER_EINT));
2965 }
2966 /* If we get here it's because the last instruction was
2967 determined to either disable or enable interrupts, but
2968 we're not sure which.
2969 We have no information yet about what effect the
2970 current instruction has on interrupts, that has to be
2971 sorted out later.
2972 The last insn may have required a NOP after it, so we
2973 deal with that now. */
2974 else
2975 {
2976 if (gen_interrupt_nops)
2977 {
2978 gen_nop ();
2979 if (warn_interrupt_nops)
2980 as_warn (_(INSERT_NOP_AFTER_UNKNOWN));
2981 }
2982 else
2983 /* warn_unsure_interrupt was called on the previous
2984 insn. */
2985 as_warn (_(WARN_NOP_AFTER_UNKNOWN));
2986 }
2987 }
2988 break;
2989
2990 case NOP_CHECK_CPU12:
2991 if (silicon_errata_warn & SILICON_ERRATA_CPU12)
2992 as_warn (_("CPU12: CMP/BIT with PC destination ignores next instruction"));
2993
2994 if (silicon_errata_fix & SILICON_ERRATA_CPU12)
2995 gen_nop ();
2996 break;
2997
2998 case NOP_CHECK_CPU19:
2999 if (silicon_errata_warn & SILICON_ERRATA_CPU19)
3000 as_warn (_("CPU19: Instruction setting CPUOFF must be followed by a NOP"));
3001
3002 if (silicon_errata_fix & SILICON_ERRATA_CPU19)
3003 gen_nop ();
3004 break;
3005
3006 default:
3007 as_bad (_("internal error: unknown nop check state"));
3008 break;
3009 }
3010 check_for_nop &= ~ (check_for_nop & - check_for_nop);
3011 }
3012 while (check_for_nop);
3013 }
3014 check_for_nop = 0;
3015 }
3016
3017 switch (fmt)
3018 {
3019 case 0:
3020 /* Emulated. */
3021 switch (opcode->insn_opnumb)
3022 {
3023 case 0:
3024 if (is_opcode ("eint"))
3025 warn_eint_nop (prev_insn_is_nop, prev_insn_is_dint);
3026
3027 /* Set/clear bits instructions. */
3028 if (extended_op)
3029 {
3030 if (!addr_op)
3031 extended |= BYTE_OPERATION;
3032
3033 /* Emit the extension word. */
3034 insn_length += 2;
3035 frag = frag_more (2);
3036 bfd_putl16 (extended, frag);
3037 }
3038
3039 insn_length += 2;
3040 frag = frag_more (2);
3041 bfd_putl16 ((bfd_vma) bin, frag);
3042 dwarf2_emit_insn (insn_length);
3043 break;
3044
3045 case 1:
3046 /* Something which works with destination operand. */
3047 line = extract_operand (line, l1, sizeof (l1));
3048 res = msp430_dstoperand (&op1, l1, opcode->bin_opcode, extended_op, TRUE);
3049 if (res)
3050 break;
3051
3052 bin |= (op1.reg | (op1.am << 7));
3053
3054 /* If the PC is the destination... */
3055 if (op1.am == 0 && op1.reg == 0
3056 /* ... and the opcode alters the SR. */
3057 && !(is_opcode ("bic") || is_opcode ("bis") || is_opcode ("mov")
3058 || is_opcode ("bicx") || is_opcode ("bisx") || is_opcode ("movx")))
3059 {
3060 if (silicon_errata_fix & SILICON_ERRATA_CPU11)
3061 as_bad (_("CPU11: PC is destination of SR altering instruction"));
3062 else if (silicon_errata_warn & SILICON_ERRATA_CPU11)
3063 as_warn (_("CPU11: PC is destination of SR altering instruction"));
3064 }
3065
3066 /* If the status register is the destination... */
3067 if (op1.am == 0 && op1.reg == 2
3068 /* ... and the opcode alters the SR. */
3069 && (is_opcode ("adc") || is_opcode ("dec") || is_opcode ("decd")
3070 || is_opcode ("inc") || is_opcode ("incd") || is_opcode ("inv")
3071 || is_opcode ("sbc") || is_opcode ("sxt")
3072 || is_opcode ("adcx") || is_opcode ("decx") || is_opcode ("decdx")
3073 || is_opcode ("incx") || is_opcode ("incdx") || is_opcode ("invx")
3074 || is_opcode ("sbcx")
3075 ))
3076 {
3077 if (silicon_errata_fix & SILICON_ERRATA_CPU13)
3078 as_bad (_("CPU13: SR is destination of SR altering instruction"));
3079 else if (silicon_errata_warn & SILICON_ERRATA_CPU13)
3080 as_warn (_("CPU13: SR is destination of SR altering instruction"));
3081 }
3082
3083 /* Compute the entire instruction length, in bytes. */
3084 op_length = (extended_op ? 2 : 0) + 2 + (op1.ol * 2);
3085 insn_length += op_length;
3086 frag = frag_more (op_length);
3087 where = frag - frag_now->fr_literal;
3088
3089 if (extended_op)
3090 {
3091 if (!addr_op)
3092 extended |= BYTE_OPERATION;
3093
3094 if (op1.ol != 0 && ((extended & 0xf) != 0))
3095 {
3096 as_bad (_("repeat instruction used with non-register mode instruction"));
3097 extended &= ~ 0xf;
3098 }
3099
3100 if (op1.mode == OP_EXP)
3101 {
3102 if (op1.exp.X_op == O_constant)
3103 extended |= ((op1.exp.X_add_number >> 16) & 0xf) << 7;
3104
3105 else if (op1.reg || op1.am == 3) /* Not PC relative. */
3106 fix_new_exp (frag_now, where, 6, &(op1.exp), FALSE,
3107 BFD_RELOC_MSP430X_ABS20_EXT_SRC);
3108 else
3109 fix_new_exp (frag_now, where, 6, &(op1.exp), FALSE,
3110 BFD_RELOC_MSP430X_PCR20_EXT_SRC);
3111 }
3112
3113 /* Emit the extension word. */
3114 bfd_putl16 (extended, frag);
3115 frag += 2;
3116 where += 2;
3117 }
3118
3119 bfd_putl16 ((bfd_vma) bin, frag);
3120 frag += 2;
3121 where += 2;
3122
3123 if (op1.mode == OP_EXP)
3124 {
3125 if (op1.exp.X_op == O_constant)
3126 {
3127 bfd_putl16 (op1.exp.X_add_number & 0xffff, frag);
3128 }
3129 else
3130 {
3131 bfd_putl16 ((bfd_vma) ZEROS, frag);
3132
3133 if (!extended_op)
3134 {
3135 if (op1.reg)
3136 fix_new_exp (frag_now, where, 2,
3137 &(op1.exp), FALSE, CHECK_RELOC_MSP430 (op1));
3138 else
3139 fix_new_exp (frag_now, where, 2,
3140 &(op1.exp), TRUE, CHECK_RELOC_MSP430_PCREL);
3141 }
3142 }
3143 }
3144
3145 dwarf2_emit_insn (insn_length);
3146 break;
3147
3148 case 2:
3149 /* Shift instruction. */
3150 line = extract_operand (line, l1, sizeof (l1));
3151 strncpy (l2, l1, sizeof (l2));
3152 l2[sizeof (l2) - 1] = '\0';
3153 res = msp430_srcoperand (&op1, l1, opcode->bin_opcode, &imm_op, extended_op, TRUE);
3154 res += msp430_dstoperand (&op2, l2, opcode->bin_opcode, extended_op, TRUE);
3155
3156 if (res)
3157 break; /* An error occurred. All warnings were done before. */
3158
3159 insn_length = (extended_op ? 2 : 0) + 2 + (op1.ol * 2) + (op2.ol * 2);
3160 frag = frag_more (insn_length);
3161 where = frag - frag_now->fr_literal;
3162
3163 if (target_is_430xv2 ()
3164 && op1.mode == OP_REG
3165 && op1.reg == 0
3166 && (is_opcode ("rlax")
3167 || is_opcode ("rlcx")
3168 || is_opcode ("rla")
3169 || is_opcode ("rlc")))
3170 {
3171 as_bad (_("%s: attempt to rotate the PC register"), opcode->name);
3172 break;
3173 }
3174
3175 /* If the status register is the destination... */
3176 if (op1.am == 0 && op1.reg == 2
3177 /* ... and the opcode alters the SR. */
3178 && (is_opcode ("rla") || is_opcode ("rlc")
3179 || is_opcode ("rlax") || is_opcode ("rlcx")
3180 || is_opcode ("sxt") || is_opcode ("sxtx")
3181 || is_opcode ("swpb")
3182 ))
3183 {
3184 if (silicon_errata_fix & SILICON_ERRATA_CPU13)
3185 as_bad (_("CPU13: SR is destination of SR altering instruction"));
3186 else if (silicon_errata_warn & SILICON_ERRATA_CPU13)
3187 as_warn (_("CPU13: SR is destination of SR altering instruction"));
3188 }
3189
3190 if (extended_op)
3191 {
3192 if (!addr_op)
3193 extended |= BYTE_OPERATION;
3194
3195 if ((op1.ol != 0 || op2.ol != 0) && ((extended & 0xf) != 0))
3196 {
3197 as_bad (_("repeat instruction used with non-register mode instruction"));
3198 extended &= ~ 0xf;
3199 }
3200
3201 if (op1.mode == OP_EXP)
3202 {
3203 if (op1.exp.X_op == O_constant)
3204 extended |= ((op1.exp.X_add_number >> 16) & 0xf) << 7;
3205
3206 else if (op1.reg || op1.am == 3) /* Not PC relative. */
3207 fix_new_exp (frag_now, where, 6, &(op1.exp), FALSE,
3208 BFD_RELOC_MSP430X_ABS20_EXT_SRC);
3209 else
3210 fix_new_exp (frag_now, where, 6, &(op1.exp), FALSE,
3211 BFD_RELOC_MSP430X_PCR20_EXT_SRC);
3212 }
3213
3214 if (op2.mode == OP_EXP)
3215 {
3216 if (op2.exp.X_op == O_constant)
3217 extended |= (op2.exp.X_add_number >> 16) & 0xf;
3218
3219 else if (op1.mode == OP_EXP)
3220 fix_new_exp (frag_now, where, 8, &(op2.exp), FALSE,
3221 op2.reg ? BFD_RELOC_MSP430X_ABS20_EXT_ODST
3222 : BFD_RELOC_MSP430X_PCR20_EXT_ODST);
3223 else
3224 fix_new_exp (frag_now, where, 6, &(op2.exp), FALSE,
3225 op2.reg ? BFD_RELOC_MSP430X_ABS20_EXT_DST
3226 : BFD_RELOC_MSP430X_PCR20_EXT_DST);
3227 }
3228
3229 /* Emit the extension word. */
3230 bfd_putl16 (extended, frag);
3231 frag += 2;
3232 where += 2;
3233 }
3234
3235 bin |= (op2.reg | (op1.reg << 8) | (op1.am << 4) | (op2.am << 7));
3236 bfd_putl16 ((bfd_vma) bin, frag);
3237 frag += 2;
3238 where += 2;
3239
3240 if (op1.mode == OP_EXP)
3241 {
3242 if (op1.exp.X_op == O_constant)
3243 {
3244 bfd_putl16 (op1.exp.X_add_number & 0xffff, frag);
3245 }
3246 else
3247 {
3248 bfd_putl16 ((bfd_vma) ZEROS, frag);
3249
3250 if (!extended_op)
3251 {
3252 if (op1.reg || op1.am == 3) /* Not PC relative. */
3253 fix_new_exp (frag_now, where, 2,
3254 &(op1.exp), FALSE, CHECK_RELOC_MSP430 (op1));
3255 else
3256 fix_new_exp (frag_now, where, 2,
3257 &(op1.exp), TRUE, CHECK_RELOC_MSP430_PCREL);
3258 }
3259 }
3260 frag += 2;
3261 where += 2;
3262 }
3263
3264 if (op2.mode == OP_EXP)
3265 {
3266 if (op2.exp.X_op == O_constant)
3267 {
3268 bfd_putl16 (op2.exp.X_add_number & 0xffff, frag);
3269 }
3270 else
3271 {
3272 bfd_putl16 ((bfd_vma) ZEROS, frag);
3273
3274 if (!extended_op)
3275 {
3276 if (op2.reg) /* Not PC relative. */
3277 fix_new_exp (frag_now, where, 2,
3278 &(op2.exp), FALSE, CHECK_RELOC_MSP430 (op2));
3279 else
3280 fix_new_exp (frag_now, where, 2,
3281 &(op2.exp), TRUE, CHECK_RELOC_MSP430_PCREL);
3282 }
3283 }
3284 }
3285
3286 dwarf2_emit_insn (insn_length);
3287 break;
3288
3289 case 3:
3290 /* Branch instruction => mov dst, r0. */
3291 if (extended_op)
3292 {
3293 as_bad ("Internal error: state 0/3 not coded for extended instructions");
3294 break;
3295 }
3296
3297 line = extract_operand (line, l1, sizeof (l1));
3298 res = msp430_srcoperand (&op1, l1, opcode->bin_opcode, &imm_op, extended_op, FALSE);
3299 if (res)
3300 break;
3301
3302 byte_op = FALSE;
3303 imm_op = FALSE;
3304 bin |= ((op1.reg << 8) | (op1.am << 4));
3305 op_length = 2 + 2 * op1.ol;
3306 frag = frag_more (op_length);
3307 where = frag - frag_now->fr_literal;
3308 bfd_putl16 ((bfd_vma) bin, frag);
3309
3310 if (op1.mode == OP_EXP)
3311 {
3312 if (op1.exp.X_op == O_constant)
3313 {
3314 bfd_putl16 (op1.exp.X_add_number & 0xffff, frag + 2);
3315 }
3316 else
3317 {
3318 where += 2;
3319
3320 bfd_putl16 ((bfd_vma) ZEROS, frag + 2);
3321
3322 if (op1.reg || op1.am == 3)
3323 fix_new_exp (frag_now, where, 2,
3324 &(op1.exp), FALSE, CHECK_RELOC_MSP430 (op1));
3325 else
3326 fix_new_exp (frag_now, where, 2,
3327 &(op1.exp), TRUE, CHECK_RELOC_MSP430_PCREL);
3328 }
3329 }
3330
3331 dwarf2_emit_insn (insn_length + op_length);
3332 break;
3333
3334 case 4:
3335 /* CALLA instructions. */
3336 fix_emitted = FALSE;
3337
3338 line = extract_operand (line, l1, sizeof (l1));
3339 imm_op = FALSE;
3340
3341 res = msp430_srcoperand (&op1, l1, opcode->bin_opcode, &imm_op,
3342 extended_op, FALSE);
3343 if (res)
3344 break;
3345
3346 byte_op = FALSE;
3347
3348 op_length = 2 + 2 * op1.ol;
3349 frag = frag_more (op_length);
3350 where = frag - frag_now->fr_literal;
3351
3352 if (imm_op)
3353 {
3354 if (op1.am == 3)
3355 {
3356 bin |= 0xb0;
3357
3358 fix_new_exp (frag_now, where, 4, &(op1.exp), FALSE,
3359 BFD_RELOC_MSP430X_ABS20_ADR_DST);
3360 fix_emitted = TRUE;
3361 }
3362 else if (op1.am == 1)
3363 {
3364 if (op1.reg == 0)
3365 {
3366 bin |= 0x90;
3367
3368 fix_new_exp (frag_now, where, 4, &(op1.exp), FALSE,
3369 BFD_RELOC_MSP430X_PCR20_CALL);
3370 fix_emitted = TRUE;
3371 }
3372 else
3373 bin |= 0x50 | op1.reg;
3374 }
3375 else if (op1.am == 0)
3376 bin |= 0x40 | op1.reg;
3377 }
3378 else if (op1.am == 1)
3379 {
3380 bin |= 0x80;
3381
3382 fix_new_exp (frag_now, where, 4, &(op1.exp), FALSE,
3383 BFD_RELOC_MSP430X_ABS20_ADR_DST);
3384 fix_emitted = TRUE;
3385 }
3386 else if (op1.am == 2)
3387 bin |= 0x60 | op1.reg;
3388 else if (op1.am == 3)
3389 bin |= 0x70 | op1.reg;
3390
3391 bfd_putl16 ((bfd_vma) bin, frag);
3392
3393 if (op1.mode == OP_EXP)
3394 {
3395 if (op1.ol != 1)
3396 {
3397 as_bad ("Internal error: unexpected CALLA instruction length: %d\n", op1.ol);
3398 break;
3399 }
3400
3401 bfd_putl16 ((bfd_vma) ZEROS, frag + 2);
3402
3403 if (! fix_emitted)
3404 fix_new_exp (frag_now, where + 2, 2,
3405 &(op1.exp), FALSE, BFD_RELOC_16);
3406 }
3407
3408 dwarf2_emit_insn (insn_length + op_length);
3409 break;
3410
3411 case 5:
3412 {
3413 int n;
3414 int reg;
3415
3416 /* [POP|PUSH]M[.A] #N, Rd */
3417 line = extract_operand (line, l1, sizeof (l1));
3418 line = extract_operand (line, l2, sizeof (l2));
3419
3420 if (*l1 != '#')
3421 {
3422 as_bad (_("expected #n as first argument of %s"), opcode->name);
3423 break;
3424 }
3425 end = parse_exp (l1 + 1, &(op1.exp));
3426 if (end != NULL && *end != 0)
3427 {
3428 as_bad (_("extra characters '%s' at end of constant expression '%s'"), end, l1);
3429 break;
3430 }
3431 if (op1.exp.X_op != O_constant)
3432 {
3433 as_bad (_("expected constant expression as first argument of %s"),
3434 opcode->name);
3435 break;
3436 }
3437
3438 if ((reg = check_reg (l2)) == -1)
3439 {
3440 as_bad (_("expected register as second argument of %s"),
3441 opcode->name);
3442 break;
3443 }
3444
3445 op_length = 2;
3446 frag = frag_more (op_length);
3447 where = frag - frag_now->fr_literal;
3448 bin = opcode->bin_opcode;
3449 if (! addr_op)
3450 bin |= 0x100;
3451 n = op1.exp.X_add_number;
3452 bin |= (n - 1) << 4;
3453 if (is_opcode ("pushm"))
3454 bin |= reg;
3455 else
3456 {
3457 if (reg - n + 1 < 0)
3458 {
3459 as_bad (_("Too many registers popped"));
3460 break;
3461 }
3462
3463 /* CPU21 errata: cannot use POPM to restore the SR register. */
3464 if (target_is_430xv2 ()
3465 && (reg - n + 1 < 3)
3466 && reg >= 2
3467 && is_opcode ("popm"))
3468 {
3469 as_bad (_("Cannot use POPM to restore the SR register"));
3470 break;
3471 }
3472
3473 bin |= (reg - n + 1);
3474 }
3475
3476 bfd_putl16 ((bfd_vma) bin, frag);
3477 dwarf2_emit_insn (op_length);
3478 break;
3479 }
3480
3481 case 6:
3482 {
3483 int n;
3484 int reg;
3485
3486 /* Bit rotation instructions. RRCM, RRAM, RRUM, RLAM. */
3487 if (extended & 0xff)
3488 {
3489 as_bad (_("repeat count cannot be used with %s"), opcode->name);
3490 break;
3491 }
3492
3493 line = extract_operand (line, l1, sizeof (l1));
3494 line = extract_operand (line, l2, sizeof (l2));
3495
3496 if (*l1 != '#')
3497 {
3498 as_bad (_("expected #n as first argument of %s"), opcode->name);
3499 break;
3500 }
3501 end = parse_exp (l1 + 1, &(op1.exp));
3502 if (end != NULL && *end != 0)
3503 {
3504 as_bad (_("extra characters '%s' at end of operand '%s'"), end, l1);
3505 break;
3506 }
3507 if (op1.exp.X_op != O_constant)
3508 {
3509 as_bad (_("expected constant expression as first argument of %s"),
3510 opcode->name);
3511 break;
3512 }
3513 n = op1.exp.X_add_number;
3514 if (n > 4 || n < 1)
3515 {
3516 as_bad (_("expected first argument of %s to be in the range 1-4"),
3517 opcode->name);
3518 break;
3519 }
3520
3521 if ((reg = check_reg (l2)) == -1)
3522 {
3523 as_bad (_("expected register as second argument of %s"),
3524 opcode->name);
3525 break;
3526 }
3527
3528 if (target_is_430xv2 () && reg == 0)
3529 {
3530 as_bad (_("%s: attempt to rotate the PC register"), opcode->name);
3531 break;
3532 }
3533
3534 op_length = 2;
3535 frag = frag_more (op_length);
3536 where = frag - frag_now->fr_literal;
3537
3538 bin = opcode->bin_opcode;
3539 if (! addr_op)
3540 bin |= 0x10;
3541 bin |= (n - 1) << 10;
3542 bin |= reg;
3543
3544 bfd_putl16 ((bfd_vma) bin, frag);
3545 dwarf2_emit_insn (op_length);
3546 break;
3547 }
3548
3549 case 8:
3550 {
3551 bfd_boolean need_reloc = FALSE;
3552 int n;
3553 int reg;
3554
3555 /* ADDA, CMPA and SUBA address instructions. */
3556 if (extended & 0xff)
3557 {
3558 as_bad (_("repeat count cannot be used with %s"), opcode->name);
3559 break;
3560 }
3561
3562 line = extract_operand (line, l1, sizeof (l1));
3563 line = extract_operand (line, l2, sizeof (l2));
3564
3565 bin = opcode->bin_opcode;
3566
3567 if (*l1 == '#')
3568 {
3569 end = parse_exp (l1 + 1, &(op1.exp));
3570 if (end != NULL && *end != 0)
3571 {
3572 as_bad (_("extra characters '%s' at end of operand '%s'"), end, l1);
3573 break;
3574 }
3575
3576 if (op1.exp.X_op == O_constant)
3577 {
3578 n = op1.exp.X_add_number;
3579 if (n > 0xfffff || n < - (0x7ffff))
3580 {
3581 as_bad (_("expected value of first argument of %s to fit into 20-bits"),
3582 opcode->name);
3583 break;
3584 }
3585
3586 bin |= ((n >> 16) & 0xf) << 8;
3587 }
3588 else
3589 {
3590 n = 0;
3591 need_reloc = TRUE;
3592 }
3593
3594 op_length = 4;
3595 }
3596 else
3597 {
3598 if ((n = check_reg (l1)) == -1)
3599 {
3600 as_bad (_("expected register name or constant as first argument of %s"),
3601 opcode->name);
3602 break;
3603 }
3604
3605 bin |= (n << 8) | (1 << 6);
3606 op_length = 2;
3607 }
3608
3609 if ((reg = check_reg (l2)) == -1)
3610 {
3611 as_bad (_("expected register as second argument of %s"),
3612 opcode->name);
3613 break;
3614 }
3615
3616 frag = frag_more (op_length);
3617 where = frag - frag_now->fr_literal;
3618 bin |= reg;
3619 if (need_reloc)
3620 fix_new_exp (frag_now, where, 4, &(op1.exp), FALSE,
3621 BFD_RELOC_MSP430X_ABS20_ADR_SRC);
3622
3623 bfd_putl16 ((bfd_vma) bin, frag);
3624 if (op_length == 4)
3625 bfd_putl16 ((bfd_vma) (n & 0xffff), frag + 2);
3626 dwarf2_emit_insn (op_length);
3627 break;
3628 }
3629
3630 case 9: /* MOVA, BRA, RETA. */
3631 imm_op = FALSE;
3632 bin = opcode->bin_opcode;
3633
3634 if (is_opcode ("reta"))
3635 {
3636 /* The RETA instruction does not take any arguments.
3637 The implicit first argument is @SP+.
3638 The implicit second argument is PC. */
3639 op1.mode = OP_REG;
3640 op1.am = 3;
3641 op1.reg = 1;
3642
3643 op2.mode = OP_REG;
3644 op2.reg = 0;
3645 }
3646 else
3647 {
3648 line = extract_operand (line, l1, sizeof (l1));
3649 res = msp430_srcoperand (&op1, l1, opcode->bin_opcode,
3650 &imm_op, extended_op, FALSE);
3651
3652 if (is_opcode ("bra"))
3653 {
3654 /* This is the BRA synthetic instruction.
3655 The second argument is always PC. */
3656 op2.mode = OP_REG;
3657 op2.reg = 0;
3658 }
3659 else
3660 {
3661 line = extract_operand (line, l2, sizeof (l2));
3662 res += msp430_dstoperand (&op2, l2, opcode->bin_opcode,
3663 extended_op, TRUE);
3664 }
3665
3666 if (res)
3667 break; /* Error occurred. All warnings were done before. */
3668 }
3669
3670 /* Only a restricted subset of the normal MSP430 addressing modes
3671 are supported here, so check for the ones that are allowed. */
3672 if ((op_length = try_encode_mova (imm_op, bin, & op1, & op2,
3673 & error_message)) == 0)
3674 {
3675 as_bad (error_message, opcode->name);
3676 break;
3677 }
3678 dwarf2_emit_insn (op_length);
3679 break;
3680
3681 case 10: /* RPT */
3682 line = extract_operand (line, l1, sizeof l1);
3683 /* The RPT instruction only accepted immediates and registers. */
3684 if (*l1 == '#')
3685 {
3686 end = parse_exp (l1 + 1, &(op1.exp));
3687 if (end != NULL && *end != 0)
3688 {
3689 as_bad (_("extra characters '%s' at end of operand '%s'"), end, l1);
3690 break;
3691 }
3692 if (op1.exp.X_op != O_constant)
3693 {
3694 as_bad (_("expected constant value as argument to RPT"));
3695 break;
3696 }
3697 if (op1.exp.X_add_number < 1
3698 || op1.exp.X_add_number > (1 << 4))
3699 {
3700 as_bad (_("expected constant in the range 2..16"));
3701 break;
3702 }
3703
3704 /* We silently accept and ignore a repeat count of 1. */
3705 if (op1.exp.X_add_number > 1)
3706 repeat_count = op1.exp.X_add_number;
3707 }
3708 else
3709 {
3710 int reg;
3711
3712 if ((reg = check_reg (l1)) != -1)
3713 {
3714 if (reg == 0)
3715 as_warn (_("PC used as an argument to RPT"));
3716 else
3717 repeat_count = - reg;
3718 }
3719 else
3720 {
3721 as_bad (_("expected constant or register name as argument to RPT insn"));
3722 break;
3723 }
3724 }
3725 break;
3726
3727 default:
3728 as_bad (_("Illegal emulated instruction"));
3729 break;
3730 }
3731 break;
3732
3733 /* FIXME: Emit warning when dest reg SR(R2) is addressed with .B or .A.
3734 From f5 ref man 6.3.3:
3735 The 16-bit Status Register (SR, also called R2), used as a source or
3736 destination register, can only be used in register mode addressed
3737 with word instructions. */
3738
3739 case 1: /* Format 1, double operand. */
3740 line = extract_operand (line, l1, sizeof (l1));
3741 line = extract_operand (line, l2, sizeof (l2));
3742 res = msp430_srcoperand (&op1, l1, opcode->bin_opcode, &imm_op, extended_op, TRUE);
3743 res += msp430_dstoperand (&op2, l2, opcode->bin_opcode, extended_op, TRUE);
3744
3745 if (res)
3746 break; /* Error occurred. All warnings were done before. */
3747
3748 if (extended_op
3749 && is_opcode ("movx")
3750 && addr_op
3751 && msp430_enable_relax)
3752 {
3753 /* This is the MOVX.A instruction. See if we can convert
3754 it into the MOVA instruction instead. This saves 2 bytes. */
3755 if ((op_length = try_encode_mova (imm_op, 0x0000, & op1, & op2,
3756 NULL)) != 0)
3757 {
3758 dwarf2_emit_insn (op_length);
3759 break;
3760 }
3761 }
3762
3763 bin |= (op2.reg | (op1.reg << 8) | (op1.am << 4) | (op2.am << 7));
3764
3765 /* If the PC is the destination... */
3766 if (op2.am == 0 && op2.reg == 0
3767 /* ... and the opcode alters the SR. */
3768 && !(is_opcode ("bic") || is_opcode ("bis") || is_opcode ("mov")
3769 || is_opcode ("bicx") || is_opcode ("bisx") || is_opcode ("movx")))
3770 {
3771 if (silicon_errata_fix & SILICON_ERRATA_CPU11)
3772 as_bad (_("CPU11: PC is destination of SR altering instruction"));
3773 else if (silicon_errata_warn & SILICON_ERRATA_CPU11)
3774 as_warn (_("CPU11: PC is destination of SR altering instruction"));
3775 }
3776
3777 /* If the status register is the destination... */
3778 if (op2.am == 0 && op2.reg == 2
3779 /* ... and the opcode alters the SR. */
3780 && (is_opcode ("add") || is_opcode ("addc") || is_opcode ("and")
3781 || is_opcode ("dadd") || is_opcode ("sub") || is_opcode ("subc")
3782 || is_opcode ("xor")
3783 || is_opcode ("addx") || is_opcode ("addcx") || is_opcode ("andx")
3784 || is_opcode ("daddx") || is_opcode ("subx") || is_opcode ("subcx")
3785 || is_opcode ("xorx")
3786 ))
3787 {
3788 if (silicon_errata_fix & SILICON_ERRATA_CPU13)
3789 as_bad (_("CPU13: SR is destination of SR altering instruction"));
3790 else if (silicon_errata_warn & SILICON_ERRATA_CPU13)
3791 as_warn (_("CPU13: SR is destination of SR altering instruction"));
3792 }
3793
3794 /* Chain these checks for SR manipulations so we can warn if they are not
3795 caught. */
3796 if (((is_opcode ("bis") && bin == 0xd032)
3797 || (is_opcode ("mov") && bin == 0x4032)
3798 || (is_opcode ("xor") && bin == 0xe032))
3799 && op1.mode == OP_EXP
3800 && op1.exp.X_op == O_constant
3801 && (op1.exp.X_add_number & 0x10) == 0x10)
3802 check_for_nop |= NOP_CHECK_CPU19;
3803 else if ((is_opcode ("mov") && op2.mode == OP_REG && op2.reg == 2))
3804 {
3805 /* Any MOV with the SR as the destination either enables or disables
3806 interrupts. */
3807 if (op1.mode == OP_EXP
3808 && op1.exp.X_op == O_constant)
3809 {
3810 if ((op1.exp.X_add_number & 0x8) == 0x8)
3811 {
3812 /* The GIE bit is being set. */
3813 warn_eint_nop (prev_insn_is_nop, prev_insn_is_dint);
3814 this_insn_is_eint = TRUE;
3815 }
3816 else
3817 /* The GIE bit is being cleared. */
3818 this_insn_is_dint = TRUE;
3819 }
3820 /* If an immediate value which is covered by the constant generator
3821 is the src, then op1 will have been changed to either R2 or R3 by
3822 this point.
3823 The only constants covered by CG1 and CG2, which have bit 3 set
3824 and therefore would enable interrupts when writing to the SR, are
3825 R2 with addresing mode 0b11 and R3 with 0b11.
3826 The addressing mode is in bits 5:4 of the binary opcode. */
3827 else if (op1.mode == OP_REG
3828 && (op1.reg == 2 || op1.reg == 3)
3829 && (bin & 0x30) == 0x30)
3830 {
3831 warn_eint_nop (prev_insn_is_nop, prev_insn_is_dint);
3832 this_insn_is_eint = TRUE;
3833 }
3834 /* Any other use of the constant generator with destination R2, will
3835 disable interrupts. */
3836 else if (op1.mode == OP_REG
3837 && (op1.reg == 2 || op1.reg == 3))
3838 this_insn_is_dint = TRUE;
3839 else if (do_unknown_interrupt_nops)
3840 {
3841 /* FIXME: Couldn't work out whether the insn is enabling or
3842 disabling interrupts, so for safety need to treat it as both
3843 a DINT and EINT. */
3844 warn_unsure_interrupt (prev_insn_is_nop, prev_insn_is_dint);
3845 check_for_nop |= NOP_CHECK_INTERRUPT;
3846 }
3847 }
3848 else if (is_eint (opcode->name, bin))
3849 warn_eint_nop (prev_insn_is_nop, prev_insn_is_dint);
3850 else if ((bin & 0x32) == 0x32)
3851 {
3852 /* Double-operand insn with the As==0b11 and Rdst==0x2 will result in
3853 * an interrupt state change if a write happens. */
3854 /* FIXME: How strict to be here? */
3855 ;
3856 }
3857
3858 /* Compute the entire length of the instruction in bytes. */
3859 op_length = (extended_op ? 2 : 0) /* The extension word. */
3860 + 2 /* The opcode */
3861 + (2 * op1.ol) /* The first operand. */
3862 + (2 * op2.ol); /* The second operand. */
3863
3864 insn_length += op_length;
3865 frag = frag_more (op_length);
3866 where = frag - frag_now->fr_literal;
3867
3868 if (extended_op)
3869 {
3870 if (!addr_op)
3871 extended |= BYTE_OPERATION;
3872
3873 if ((op1.ol != 0 || op2.ol != 0) && ((extended & 0xf) != 0))
3874 {
3875 as_bad (_("repeat instruction used with non-register mode instruction"));
3876 extended &= ~ 0xf;
3877 }
3878
3879 /* If necessary, emit a reloc to update the extension word. */
3880 if (op1.mode == OP_EXP)
3881 {
3882 if (op1.exp.X_op == O_constant)
3883 extended |= ((op1.exp.X_add_number >> 16) & 0xf) << 7;
3884
3885 else if (op1.reg || op1.am == 3) /* Not PC relative. */
3886 fix_new_exp (frag_now, where, 6, &(op1.exp), FALSE,
3887 BFD_RELOC_MSP430X_ABS20_EXT_SRC);
3888 else
3889 fix_new_exp (frag_now, where, 6, &(op1.exp), FALSE,
3890 BFD_RELOC_MSP430X_PCR20_EXT_SRC);
3891 }
3892
3893 if (op2.mode == OP_EXP)
3894 {
3895 if (op2.exp.X_op == O_constant)
3896 extended |= (op2.exp.X_add_number >> 16) & 0xf;
3897
3898 else if (op1.mode == OP_EXP)
3899 fix_new_exp (frag_now, where, 8, &(op2.exp), FALSE,
3900 op2.reg ? BFD_RELOC_MSP430X_ABS20_EXT_ODST
3901 : BFD_RELOC_MSP430X_PCR20_EXT_ODST);
3902
3903 else
3904 fix_new_exp (frag_now, where, 6, &(op2.exp), FALSE,
3905 op2.reg ? BFD_RELOC_MSP430X_ABS20_EXT_DST
3906 : BFD_RELOC_MSP430X_PCR20_EXT_DST);
3907 }
3908
3909 /* Emit the extension word. */
3910 bfd_putl16 (extended, frag);
3911 where += 2;
3912 frag += 2;
3913 }
3914
3915 bfd_putl16 ((bfd_vma) bin, frag);
3916 where += 2;
3917 frag += 2;
3918
3919 if (op1.mode == OP_EXP)
3920 {
3921 if (op1.exp.X_op == O_constant)
3922 {
3923 bfd_putl16 (op1.exp.X_add_number & 0xffff, frag);
3924 }
3925 else
3926 {
3927 bfd_putl16 ((bfd_vma) ZEROS, frag);
3928
3929 if (!extended_op)
3930 {
3931 if (op1.reg || op1.am == 3) /* Not PC relative. */
3932 fix_new_exp (frag_now, where, 2,
3933 &(op1.exp), FALSE, CHECK_RELOC_MSP430 (op1));
3934 else
3935 fix_new_exp (frag_now, where, 2,
3936 &(op1.exp), TRUE, CHECK_RELOC_MSP430_PCREL);
3937 }
3938 }
3939
3940 where += 2;
3941 frag += 2;
3942 }
3943
3944 if (op2.mode == OP_EXP)
3945 {
3946 if (op2.exp.X_op == O_constant)
3947 {
3948 bfd_putl16 (op2.exp.X_add_number & 0xffff, frag);
3949 }
3950 else
3951 {
3952 bfd_putl16 ((bfd_vma) ZEROS, frag);
3953
3954 if (!extended_op)
3955 {
3956 if (op2.reg) /* Not PC relative. */
3957 fix_new_exp (frag_now, where, 2,
3958 &(op2.exp), FALSE, CHECK_RELOC_MSP430 (op2));
3959 else
3960 fix_new_exp (frag_now, where, 2,
3961 &(op2.exp), TRUE, CHECK_RELOC_MSP430_PCREL);
3962 }
3963 }
3964 }
3965
3966 dwarf2_emit_insn (insn_length);
3967
3968 /* If the PC is the destination... */
3969 if (op2.am == 0 && op2.reg == 0
3970 /* ... but the opcode does not alter the destination. */
3971 && (is_opcode ("cmp") || is_opcode ("bit") || is_opcode ("cmpx")))
3972 check_for_nop |= NOP_CHECK_CPU12;
3973 break;
3974
3975 case 2: /* Single-operand mostly instr. */
3976 if (opcode->insn_opnumb == 0)
3977 {
3978 /* reti instruction. */
3979 insn_length += 2;
3980 frag = frag_more (2);
3981 bfd_putl16 ((bfd_vma) bin, frag);
3982 dwarf2_emit_insn (insn_length);
3983 break;
3984 }
3985
3986 line = extract_operand (line, l1, sizeof (l1));
3987 res = msp430_srcoperand (&op1, l1, opcode->bin_opcode,
3988 &imm_op, extended_op, TRUE);
3989 if (res)
3990 break; /* Error in operand. */
3991
3992 if (target_is_430xv2 ()
3993 && op1.mode == OP_REG
3994 && op1.reg == 0
3995 && (is_opcode ("rrax")
3996 || is_opcode ("rrcx")
3997 || is_opcode ("rra")
3998 || is_opcode ("rrc")))
3999 {
4000 as_bad (_("%s: attempt to rotate the PC register"), opcode->name);
4001 break;
4002 }
4003
4004 /* If the status register is the destination... */
4005 if (op1.am == 0 && op1.reg == 2
4006 /* ... and the opcode alters the SR. */
4007 && (is_opcode ("rra") || is_opcode ("rrc") || is_opcode ("sxt")))
4008 {
4009 if (silicon_errata_fix & SILICON_ERRATA_CPU13)
4010 as_bad (_("CPU13: SR is destination of SR altering instruction"));
4011 else if (silicon_errata_warn & SILICON_ERRATA_CPU13)
4012 as_warn (_("CPU13: SR is destination of SR altering instruction"));
4013 }
4014
4015 insn_length = (extended_op ? 2 : 0) + 2 + (op1.ol * 2);
4016 frag = frag_more (insn_length);
4017 where = frag - frag_now->fr_literal;
4018
4019 if (extended_op)
4020 {
4021 if (is_opcode ("swpbx") || is_opcode ("sxtx"))
4022 {
4023 /* These two instructions use a special
4024 encoding of the A/L and B/W bits. */
4025 bin &= ~ BYTE_OPERATION;
4026
4027 if (byte_op)
4028 {
4029 as_bad (_("%s instruction does not accept a .b suffix"),
4030 opcode->name);
4031 break;
4032 }
4033 else if (! addr_op)
4034 extended |= BYTE_OPERATION;
4035 }
4036 else if (! addr_op)
4037 extended |= BYTE_OPERATION;
4038
4039 if (is_opcode ("rrux"))
4040 extended |= IGNORE_CARRY_BIT;
4041
4042 if (op1.ol != 0 && ((extended & 0xf) != 0))
4043 {
4044 as_bad (_("repeat instruction used with non-register mode instruction"));
4045 extended &= ~ 0xf;
4046 }
4047
4048 if (op1.mode == OP_EXP)
4049 {
4050 if (op1.exp.X_op == O_constant)
4051 extended |= ((op1.exp.X_add_number >> 16) & 0xf) << 7;
4052
4053 else if (op1.reg || op1.am == 3) /* Not PC relative. */
4054 fix_new_exp (frag_now, where, 6, &(op1.exp), FALSE,
4055 BFD_RELOC_MSP430X_ABS20_EXT_SRC);
4056 else
4057 fix_new_exp (frag_now, where, 6, &(op1.exp), FALSE,
4058 BFD_RELOC_MSP430X_PCR20_EXT_SRC);
4059 }
4060
4061 /* Emit the extension word. */
4062 bfd_putl16 (extended, frag);
4063 frag += 2;
4064 where += 2;
4065 }
4066
4067 bin |= op1.reg | (op1.am << 4);
4068 bfd_putl16 ((bfd_vma) bin, frag);
4069 frag += 2;
4070 where += 2;
4071
4072 if (op1.mode == OP_EXP)
4073 {
4074 if (op1.exp.X_op == O_constant)
4075 {
4076 bfd_putl16 (op1.exp.X_add_number & 0xffff, frag);
4077 }
4078 else
4079 {
4080 bfd_putl16 ((bfd_vma) ZEROS, frag);
4081
4082 if (!extended_op)
4083 {
4084 if (op1.reg || op1.am == 3) /* Not PC relative. */
4085 fix_new_exp (frag_now, where, 2,
4086 &(op1.exp), FALSE, CHECK_RELOC_MSP430 (op1));
4087 else
4088 fix_new_exp (frag_now, where, 2,
4089 &(op1.exp), TRUE, CHECK_RELOC_MSP430_PCREL);
4090 }
4091 }
4092 }
4093
4094 dwarf2_emit_insn (insn_length);
4095 break;
4096
4097 case 3: /* Conditional jumps instructions. */
4098 line = extract_operand (line, l1, sizeof (l1));
4099 /* l1 is a label. */
4100 if (l1[0])
4101 {
4102 char *m = l1;
4103 expressionS exp;
4104
4105 if (*m == '$')
4106 m++;
4107
4108 end = parse_exp (m, &exp);
4109 if (end != NULL && *end != 0)
4110 {
4111 as_bad (_("extra characters '%s' at end of operand '%s'"), end, l1);
4112 break;
4113 }
4114
4115 /* In order to handle something like:
4116
4117 and #0x8000, r5
4118 tst r5
4119 jz 4 ; skip next 4 bytes
4120 inv r5
4121 inc r5
4122 nop ; will jump here if r5 positive or zero
4123
4124 jCOND -n ;assumes jump n bytes backward:
4125
4126 mov r5,r6
4127 jmp -2
4128
4129 is equal to:
4130 lab:
4131 mov r5,r6
4132 jmp lab
4133
4134 jCOND $n ; jump from PC in either direction. */
4135
4136 if (exp.X_op == O_constant)
4137 {
4138 int x = exp.X_add_number;
4139
4140 if (x & 1)
4141 {
4142 as_warn (_("Even number required. Rounded to %d"), x + 1);
4143 x++;
4144 }
4145
4146 if ((*l1 == '$' && x > 0) || x < 0)
4147 x -= 2;
4148
4149 x >>= 1;
4150
4151 if (x > 512 || x < -511)
4152 {
4153 as_bad (_("Wrong displacement %d"), x << 1);
4154 break;
4155 }
4156
4157 insn_length += 2;
4158 frag = frag_more (2); /* Instr size is 1 word. */
4159
4160 bin |= x & 0x3ff;
4161 bfd_putl16 ((bfd_vma) bin, frag);
4162 }
4163 else if (exp.X_op == O_symbol && *l1 != '$')
4164 {
4165 insn_length += 2;
4166 frag = frag_more (2); /* Instr size is 1 word. */
4167 where = frag - frag_now->fr_literal;
4168 fix_new_exp (frag_now, where, 2,
4169 &exp, TRUE, BFD_RELOC_MSP430_10_PCREL);
4170
4171 bfd_putl16 ((bfd_vma) bin, frag);
4172 }
4173 else if (*l1 == '$')
4174 {
4175 as_bad (_("instruction requires label sans '$'"));
4176 }
4177 else
4178 as_bad (_
4179 ("instruction requires label or value in range -511:512"));
4180 dwarf2_emit_insn (insn_length);
4181 break;
4182 }
4183 else
4184 {
4185 as_bad (_("instruction requires label"));
4186 break;
4187 }
4188 break;
4189
4190 case 4: /* Extended jumps. */
4191 if (!msp430_enable_polys)
4192 {
4193 as_bad (_("polymorphs are not enabled. Use -mP option to enable."));
4194 break;
4195 }
4196
4197 line = extract_operand (line, l1, sizeof (l1));
4198 if (l1[0])
4199 {
4200 char *m = l1;
4201 expressionS exp;
4202
4203 /* Ignore absolute addressing. make it PC relative anyway. */
4204 if (*m == '#' || *m == '$')
4205 m++;
4206
4207 end = parse_exp (m, & exp);
4208 if (end != NULL && *end != 0)
4209 {
4210 as_bad (_("extra characters '%s' at end of operand '%s'"), end, l1);
4211 break;
4212 }
4213 if (exp.X_op == O_symbol)
4214 {
4215 /* Relaxation required. */
4216 struct rcodes_s rc = msp430_rcodes[opcode->insn_opnumb];
4217
4218 if (target_is_430x ())
4219 rc = msp430x_rcodes[opcode->insn_opnumb];
4220
4221 /* The parameter to dwarf2_emit_insn is actually the offset to
4222 the start of the insn from the fix piece of instruction that
4223 was emitted. Since next fragments may have variable size we
4224 tie debug info to the beginning of the instruction. */
4225 insn_length += 8;
4226 frag = frag_more (8);
4227 dwarf2_emit_insn (0);
4228 bfd_putl16 ((bfd_vma) rc.sop, frag);
4229 frag = frag_variant (rs_machine_dependent, 8, 2,
4230 /* Wild guess. */
4231 ENCODE_RELAX (rc.lpos, STATE_BITS10),
4232 exp.X_add_symbol,
4233 0, /* Offset is zero if jump dist less than 1K. */
4234 (char *) frag);
4235 break;
4236 }
4237 }
4238
4239 as_bad (_("instruction requires label"));
4240 break;
4241
4242 case 5: /* Emulated extended branches. */
4243 if (!msp430_enable_polys)
4244 {
4245 as_bad (_("polymorphs are not enabled. Use -mP option to enable."));
4246 break;
4247 }
4248 line = extract_operand (line, l1, sizeof (l1));
4249 if (l1[0])
4250 {
4251 char * m = l1;
4252 expressionS exp;
4253
4254 /* Ignore absolute addressing. make it PC relative anyway. */
4255 if (*m == '#' || *m == '$')
4256 m++;
4257
4258 end = parse_exp (m, & exp);
4259 if (end != NULL && *end != 0)
4260 {
4261 as_bad (_("extra characters '%s' at end of operand '%s'"), end, l1);
4262 break;
4263 }
4264 if (exp.X_op == O_symbol)
4265 {
4266 /* Relaxation required. */
4267 struct hcodes_s hc = msp430_hcodes[opcode->insn_opnumb];
4268
4269 if (target_is_430x ())
4270 hc = msp430x_hcodes[opcode->insn_opnumb];
4271
4272 insn_length += 8;
4273 frag = frag_more (8);
4274 dwarf2_emit_insn (0);
4275 bfd_putl16 ((bfd_vma) hc.op0, frag);
4276 bfd_putl16 ((bfd_vma) hc.op1, frag+2);
4277
4278 frag = frag_variant (rs_machine_dependent, 8, 2,
4279 ENCODE_RELAX (STATE_EMUL_BRANCH, STATE_BITS10), /* Wild guess. */
4280 exp.X_add_symbol,
4281 0, /* Offset is zero if jump dist less than 1K. */
4282 (char *) frag);
4283 break;
4284 }
4285 }
4286
4287 as_bad (_("instruction requires label"));
4288 break;
4289
4290 default:
4291 as_bad (_("Illegal instruction or not implemented opcode."));
4292 }
4293
4294 if (is_opcode ("nop"))
4295 {
4296 prev_insn_is_nop = TRUE;
4297 prev_insn_is_dint = FALSE;
4298 prev_insn_is_eint = FALSE;
4299 }
4300 else if (this_insn_is_dint || is_dint (opcode->name, bin))
4301 {
4302 prev_insn_is_dint = TRUE;
4303 prev_insn_is_eint = FALSE;
4304 prev_insn_is_nop = FALSE;
4305 check_for_nop |= NOP_CHECK_INTERRUPT;
4306 }
4307 /* NOP is not needed after EINT for 430 ISA. */
4308 else if (target_is_430x () && (this_insn_is_eint || is_eint (opcode->name, bin)))
4309 {
4310 prev_insn_is_eint = TRUE;
4311 prev_insn_is_nop = FALSE;
4312 prev_insn_is_dint = FALSE;
4313 check_for_nop |= NOP_CHECK_INTERRUPT;
4314 }
4315 else
4316 {
4317 prev_insn_is_nop = FALSE;
4318 prev_insn_is_dint = FALSE;
4319 prev_insn_is_eint = FALSE;
4320 }
4321
4322 input_line_pointer = line;
4323 return 0;
4324 }
4325
4326 void
md_assemble(char * str)4327 md_assemble (char * str)
4328 {
4329 struct msp430_opcode_s * opcode;
4330 char cmd[32];
4331 unsigned int i = 0;
4332
4333 str = skip_space (str); /* Skip leading spaces. */
4334 str = extract_cmd (str, cmd, sizeof (cmd) - 1);
4335
4336 while (cmd[i])
4337 {
4338 char a = TOLOWER (cmd[i]);
4339 cmd[i] = a;
4340 i++;
4341 }
4342
4343 if (!cmd[0])
4344 {
4345 as_bad (_("can't find opcode"));
4346 return;
4347 }
4348
4349 opcode = (struct msp430_opcode_s *) str_hash_find (msp430_hash, cmd);
4350
4351 if (opcode == NULL)
4352 {
4353 as_bad (_("unknown opcode `%s'"), cmd);
4354 return;
4355 }
4356
4357 {
4358 char *__t = input_line_pointer;
4359
4360 msp430_operands (opcode, str);
4361 input_line_pointer = __t;
4362 }
4363 }
4364
4365 /* GAS will call this function for each section at the end of the assembly,
4366 to permit the CPU backend to adjust the alignment of a section. */
4367
4368 valueT
md_section_align(asection * seg,valueT addr)4369 md_section_align (asection * seg, valueT addr)
4370 {
4371 int align = bfd_section_alignment (seg);
4372
4373 return ((addr + (1 << align) - 1) & -(1 << align));
4374 }
4375
4376 /* If you define this macro, it should return the offset between the
4377 address of a PC relative fixup and the position from which the PC
4378 relative adjustment should be made. On many processors, the base
4379 of a PC relative instruction is the next instruction, so this
4380 macro would return the length of an instruction. */
4381
4382 long
md_pcrel_from_section(fixS * fixp,segT sec)4383 md_pcrel_from_section (fixS * fixp, segT sec)
4384 {
4385 if (fixp->fx_addsy != (symbolS *) NULL
4386 && (!S_IS_DEFINED (fixp->fx_addsy)
4387 || (S_GET_SEGMENT (fixp->fx_addsy) != sec)))
4388 return 0;
4389
4390 return fixp->fx_frag->fr_address + fixp->fx_where;
4391 }
4392
4393 /* Addition to the standard TC_FORCE_RELOCATION_LOCAL.
4394 Now it handles the situation when relocations
4395 have to be passed to linker. */
4396 int
msp430_force_relocation_local(fixS * fixp)4397 msp430_force_relocation_local (fixS *fixp)
4398 {
4399 if (fixp->fx_r_type == BFD_RELOC_MSP430_10_PCREL)
4400 return 1;
4401 if (fixp->fx_pcrel)
4402 return 1;
4403 if (msp430_enable_polys
4404 && !msp430_enable_relax)
4405 return 1;
4406
4407 return 0;
4408 }
4409
4410
4411 /* GAS will call this for each fixup. It should store the correct
4412 value in the object file. */
4413 void
md_apply_fix(fixS * fixp,valueT * valuep,segT seg)4414 md_apply_fix (fixS * fixp, valueT * valuep, segT seg)
4415 {
4416 unsigned char * where;
4417 unsigned long insn;
4418 long value;
4419
4420 if (fixp->fx_addsy == (symbolS *) NULL)
4421 {
4422 value = *valuep;
4423 fixp->fx_done = 1;
4424 }
4425 else if (fixp->fx_pcrel)
4426 {
4427 segT s = S_GET_SEGMENT (fixp->fx_addsy);
4428
4429 if (fixp->fx_addsy && (s == seg || s == absolute_section))
4430 {
4431 /* FIXME: We can appear here only in case if we perform a pc
4432 relative jump to the label which is i) global, ii) locally
4433 defined or this is a jump to an absolute symbol.
4434 If this is an absolute symbol -- everything is OK.
4435 If this is a global label, we've got a symbol value defined
4436 twice:
4437 1. S_GET_VALUE (fixp->fx_addsy) will contain a symbol offset
4438 from this section start
4439 2. *valuep will contain the real offset from jump insn to the
4440 label
4441 So, the result of S_GET_VALUE (fixp->fx_addsy) + (* valuep);
4442 will be incorrect. Therefore remove s_get_value. */
4443 value = /* S_GET_VALUE (fixp->fx_addsy) + */ * valuep;
4444 fixp->fx_done = 1;
4445 }
4446 else
4447 value = *valuep;
4448 }
4449 else
4450 {
4451 value = fixp->fx_offset;
4452
4453 if (fixp->fx_subsy != (symbolS *) NULL)
4454 {
4455 if (S_GET_SEGMENT (fixp->fx_subsy) == absolute_section)
4456 {
4457 value -= S_GET_VALUE (fixp->fx_subsy);
4458 fixp->fx_done = 1;
4459 }
4460 }
4461 }
4462
4463 fixp->fx_no_overflow = 1;
4464
4465 /* If polymorphs are enabled and relax disabled.
4466 do not kill any relocs and pass them to linker. */
4467 if (msp430_enable_polys
4468 && !msp430_enable_relax)
4469 {
4470 if (!fixp->fx_addsy
4471 || S_GET_SEGMENT (fixp->fx_addsy) == absolute_section)
4472 fixp->fx_done = 1; /* It is ok to kill 'abs' reloc. */
4473 else
4474 fixp->fx_done = 0;
4475 }
4476
4477 if (fixp->fx_done)
4478 {
4479 /* Fetch the instruction, insert the fully resolved operand
4480 value, and stuff the instruction back again. */
4481 where = (unsigned char *) fixp->fx_frag->fr_literal + fixp->fx_where;
4482
4483 insn = bfd_getl16 (where);
4484
4485 switch (fixp->fx_r_type)
4486 {
4487 case BFD_RELOC_MSP430_10_PCREL:
4488 if (value & 1)
4489 as_bad_where (fixp->fx_file, fixp->fx_line,
4490 _("odd address operand: %ld"), value);
4491
4492 /* Jumps are in words. */
4493 value >>= 1;
4494 --value; /* Correct PC. */
4495
4496 if (value < -512 || value > 511)
4497 as_bad_where (fixp->fx_file, fixp->fx_line,
4498 _("operand out of range: %ld"), value);
4499
4500 value &= 0x3ff; /* get rid of extended sign */
4501 bfd_putl16 ((bfd_vma) (value | insn), where);
4502 break;
4503
4504 case BFD_RELOC_MSP430X_PCR16:
4505 case BFD_RELOC_MSP430_RL_PCREL:
4506 case BFD_RELOC_MSP430_16_PCREL:
4507 if (value & 1)
4508 as_bad_where (fixp->fx_file, fixp->fx_line,
4509 _("odd address operand: %ld"), value);
4510 /* Fall through. */
4511
4512 case BFD_RELOC_MSP430_16_PCREL_BYTE:
4513 /* Nothing to be corrected here. */
4514 if (value < -32768 || value > 65536)
4515 as_bad_where (fixp->fx_file, fixp->fx_line,
4516 _("operand out of range: %ld"), value);
4517 /* Fall through. */
4518
4519 case BFD_RELOC_MSP430X_ABS16:
4520 case BFD_RELOC_MSP430_16:
4521 case BFD_RELOC_16:
4522 case BFD_RELOC_MSP430_16_BYTE:
4523 value &= 0xffff; /* Get rid of extended sign. */
4524 bfd_putl16 ((bfd_vma) value, where);
4525 break;
4526
4527 case BFD_RELOC_MSP430_ABS_HI16:
4528 value >>= 16;
4529 value &= 0xffff; /* Get rid of extended sign. */
4530 bfd_putl16 ((bfd_vma) value, where);
4531 break;
4532
4533 case BFD_RELOC_32:
4534 bfd_putl16 ((bfd_vma) value, where);
4535 break;
4536
4537 case BFD_RELOC_MSP430_ABS8:
4538 case BFD_RELOC_8:
4539 bfd_put_8 (NULL, (bfd_vma) value, where);
4540 break;
4541
4542 case BFD_RELOC_MSP430X_ABS20_EXT_SRC:
4543 case BFD_RELOC_MSP430X_PCR20_EXT_SRC:
4544 bfd_putl16 ((bfd_vma) (value & 0xffff), where + 4);
4545 value >>= 16;
4546 bfd_putl16 ((bfd_vma) (((value & 0xf) << 7) | insn), where);
4547 break;
4548
4549 case BFD_RELOC_MSP430X_ABS20_ADR_SRC:
4550 bfd_putl16 ((bfd_vma) (value & 0xffff), where + 2);
4551 value >>= 16;
4552 bfd_putl16 ((bfd_vma) (((value & 0xf) << 8) | insn), where);
4553 break;
4554
4555 case BFD_RELOC_MSP430X_ABS20_EXT_ODST:
4556 bfd_putl16 ((bfd_vma) (value & 0xffff), where + 6);
4557 value >>= 16;
4558 bfd_putl16 ((bfd_vma) ((value & 0xf) | insn), where);
4559 break;
4560
4561 case BFD_RELOC_MSP430X_PCR20_CALL:
4562 bfd_putl16 ((bfd_vma) (value & 0xffff), where + 2);
4563 value >>= 16;
4564 bfd_putl16 ((bfd_vma) ((value & 0xf) | insn), where);
4565 break;
4566
4567 case BFD_RELOC_MSP430X_ABS20_EXT_DST:
4568 case BFD_RELOC_MSP430X_PCR20_EXT_DST:
4569 bfd_putl16 ((bfd_vma) (value & 0xffff), where + 4);
4570 value >>= 16;
4571 bfd_putl16 ((bfd_vma) ((value & 0xf) | insn), where);
4572 break;
4573
4574 case BFD_RELOC_MSP430X_PCR20_EXT_ODST:
4575 bfd_putl16 ((bfd_vma) (value & 0xffff), where + 6);
4576 value >>= 16;
4577 bfd_putl16 ((bfd_vma) ((value & 0xf) | insn), where);
4578 break;
4579
4580 case BFD_RELOC_MSP430X_ABS20_ADR_DST:
4581 bfd_putl16 ((bfd_vma) (value & 0xffff), where + 2);
4582 value >>= 16;
4583 bfd_putl16 ((bfd_vma) ((value & 0xf) | insn), where);
4584 break;
4585
4586 default:
4587 as_fatal (_("line %d: unknown relocation type: 0x%x"),
4588 fixp->fx_line, fixp->fx_r_type);
4589 break;
4590 }
4591 }
4592 else
4593 {
4594 fixp->fx_addnumber = value;
4595 }
4596 }
4597
4598 static bfd_boolean
S_IS_GAS_LOCAL(symbolS * s)4599 S_IS_GAS_LOCAL (symbolS * s)
4600 {
4601 const char * name;
4602 unsigned int len;
4603
4604 if (s == NULL)
4605 return FALSE;
4606 name = S_GET_NAME (s);
4607 len = strlen (name) - 1;
4608
4609 return name[len] == 1 || name[len] == 2;
4610 }
4611
4612 /* GAS will call this to generate a reloc, passing the resulting reloc
4613 to `bfd_install_relocation'. This currently works poorly, as
4614 `bfd_install_relocation' often does the wrong thing, and instances of
4615 `tc_gen_reloc' have been written to work around the problems, which
4616 in turns makes it difficult to fix `bfd_install_relocation'. */
4617
4618 /* If while processing a fixup, a reloc really needs to be created
4619 then it is done here. */
4620
4621 arelent **
tc_gen_reloc(asection * seg ATTRIBUTE_UNUSED,fixS * fixp)4622 tc_gen_reloc (asection * seg ATTRIBUTE_UNUSED, fixS * fixp)
4623 {
4624 static arelent * no_relocs = NULL;
4625 static arelent * relocs[MAX_RELOC_EXPANSION + 1];
4626 arelent *reloc;
4627
4628 reloc = XNEW (arelent);
4629 reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
4630 reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type);
4631
4632 if (reloc->howto == (reloc_howto_type *) NULL)
4633 {
4634 as_bad_where (fixp->fx_file, fixp->fx_line,
4635 _("reloc %d not supported by object file format"),
4636 (int) fixp->fx_r_type);
4637 free (reloc);
4638 return & no_relocs;
4639 }
4640
4641 relocs[0] = reloc;
4642 relocs[1] = NULL;
4643
4644 if (fixp->fx_subsy
4645 && S_GET_SEGMENT (fixp->fx_subsy) == absolute_section)
4646 {
4647 fixp->fx_offset -= S_GET_VALUE (fixp->fx_subsy);
4648 fixp->fx_subsy = NULL;
4649 }
4650
4651 if (fixp->fx_addsy && fixp->fx_subsy)
4652 {
4653 asection *asec, *ssec;
4654
4655 asec = S_GET_SEGMENT (fixp->fx_addsy);
4656 ssec = S_GET_SEGMENT (fixp->fx_subsy);
4657
4658 /* If we have a difference between two different, non-absolute symbols
4659 we must generate two relocs (one for each symbol) and allow the
4660 linker to resolve them - relaxation may change the distances between
4661 symbols, even local symbols defined in the same section.
4662
4663 Unfortunately we cannot do this with assembler generated local labels
4664 because there can be multiple incarnations of the same label, with
4665 exactly the same name, in any given section and the linker will have
4666 no way to identify the correct one. Instead we just have to hope
4667 that no relaxation will occur between the local label and the other
4668 symbol in the expression.
4669
4670 Similarly we have to compute differences between symbols in the .eh_frame
4671 section as the linker is not smart enough to apply relocations there
4672 before attempting to process it. */
4673 if ((ssec != absolute_section || asec != absolute_section)
4674 && (fixp->fx_addsy != fixp->fx_subsy)
4675 && strcmp (ssec->name, ".eh_frame") != 0
4676 && ! S_IS_GAS_LOCAL (fixp->fx_addsy)
4677 && ! S_IS_GAS_LOCAL (fixp->fx_subsy))
4678 {
4679 arelent * reloc2 = XNEW (arelent);
4680
4681 relocs[0] = reloc2;
4682 relocs[1] = reloc;
4683
4684 reloc2->address = reloc->address;
4685 reloc2->howto = bfd_reloc_type_lookup (stdoutput,
4686 BFD_RELOC_MSP430_SYM_DIFF);
4687 reloc2->addend = - S_GET_VALUE (fixp->fx_subsy);
4688
4689 if (ssec == absolute_section)
4690 reloc2->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
4691 else
4692 {
4693 reloc2->sym_ptr_ptr = XNEW (asymbol *);
4694 *reloc2->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_subsy);
4695 }
4696
4697 reloc->addend = fixp->fx_offset;
4698 if (asec == absolute_section)
4699 {
4700 reloc->addend += S_GET_VALUE (fixp->fx_addsy);
4701 reloc->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
4702 }
4703 else
4704 {
4705 reloc->sym_ptr_ptr = XNEW (asymbol *);
4706 *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
4707 }
4708
4709 fixp->fx_pcrel = 0;
4710 fixp->fx_done = 1;
4711 return relocs;
4712 }
4713 else
4714 {
4715 char *fixpos = fixp->fx_where + fixp->fx_frag->fr_literal;
4716
4717 reloc->addend = (S_GET_VALUE (fixp->fx_addsy)
4718 - S_GET_VALUE (fixp->fx_subsy) + fixp->fx_offset);
4719
4720 switch (fixp->fx_r_type)
4721 {
4722 case BFD_RELOC_8:
4723 md_number_to_chars (fixpos, reloc->addend, 1);
4724 break;
4725
4726 case BFD_RELOC_16:
4727 md_number_to_chars (fixpos, reloc->addend, 2);
4728 break;
4729
4730 case BFD_RELOC_24:
4731 md_number_to_chars (fixpos, reloc->addend, 3);
4732 break;
4733
4734 case BFD_RELOC_32:
4735 md_number_to_chars (fixpos, reloc->addend, 4);
4736 break;
4737
4738 default:
4739 reloc->sym_ptr_ptr
4740 = (asymbol **) bfd_abs_section_ptr->symbol_ptr_ptr;
4741 return relocs;
4742 }
4743
4744 free (reloc);
4745 return & no_relocs;
4746 }
4747 }
4748 else
4749 {
4750 #if 0
4751 if (fixp->fx_r_type == BFD_RELOC_MSP430X_ABS16
4752 && S_GET_SEGMENT (fixp->fx_addsy) == absolute_section)
4753 {
4754 bfd_vma amount = S_GET_VALUE (fixp->fx_addsy);
4755 char *fixpos = fixp->fx_where + fixp->fx_frag->fr_literal;
4756
4757 md_number_to_chars (fixpos, amount, 2);
4758 free (reloc);
4759 return & no_relocs;
4760 }
4761 #endif
4762 reloc->sym_ptr_ptr = XNEW (asymbol *);
4763 *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
4764 reloc->addend = fixp->fx_offset;
4765
4766 if (fixp->fx_r_type == BFD_RELOC_VTABLE_INHERIT
4767 || fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
4768 reloc->address = fixp->fx_offset;
4769 }
4770
4771 return relocs;
4772 }
4773
4774 int
md_estimate_size_before_relax(fragS * fragP ATTRIBUTE_UNUSED,asection * segment_type ATTRIBUTE_UNUSED)4775 md_estimate_size_before_relax (fragS * fragP ATTRIBUTE_UNUSED,
4776 asection * segment_type ATTRIBUTE_UNUSED)
4777 {
4778 if (fragP->fr_symbol && S_GET_SEGMENT (fragP->fr_symbol) == segment_type)
4779 {
4780 /* This is a jump -> pcrel mode. Nothing to do much here.
4781 Return value == 2. */
4782 fragP->fr_subtype =
4783 ENCODE_RELAX (RELAX_LEN (fragP->fr_subtype), STATE_BITS10);
4784 }
4785 else if (fragP->fr_symbol)
4786 {
4787 /* It's got a segment, but it's not ours. Even if fr_symbol is in
4788 an absolute segment, we don't know a displacement until we link
4789 object files. So it will always be long. This also applies to
4790 labels in a subsegment of current. Liker may relax it to short
4791 jump later. Return value == 8. */
4792 fragP->fr_subtype =
4793 ENCODE_RELAX (RELAX_LEN (fragP->fr_subtype), STATE_WORD);
4794 }
4795 else
4796 {
4797 /* We know the abs value. may be it is a jump to fixed address.
4798 Impossible in our case, cause all constants already handled. */
4799 fragP->fr_subtype =
4800 ENCODE_RELAX (RELAX_LEN (fragP->fr_subtype), STATE_UNDEF);
4801 }
4802
4803 return md_relax_table[fragP->fr_subtype].rlx_length;
4804 }
4805
4806 void
md_convert_frag(bfd * abfd ATTRIBUTE_UNUSED,asection * sec ATTRIBUTE_UNUSED,fragS * fragP)4807 md_convert_frag (bfd * abfd ATTRIBUTE_UNUSED,
4808 asection * sec ATTRIBUTE_UNUSED,
4809 fragS * fragP)
4810 {
4811 char * where = 0;
4812 int rela = -1;
4813 int i;
4814 struct rcodes_s * cc = NULL;
4815 struct hcodes_s * hc = NULL;
4816
4817 switch (fragP->fr_subtype)
4818 {
4819 case ENCODE_RELAX (STATE_UNCOND_BRANCH, STATE_BITS10):
4820 case ENCODE_RELAX (STATE_SIMPLE_BRANCH, STATE_BITS10):
4821 case ENCODE_RELAX (STATE_NOOV_BRANCH, STATE_BITS10):
4822 /* We do not have to convert anything here.
4823 Just apply a fix. */
4824 rela = BFD_RELOC_MSP430_10_PCREL;
4825 break;
4826
4827 case ENCODE_RELAX (STATE_UNCOND_BRANCH, STATE_WORD):
4828 case ENCODE_RELAX (STATE_UNCOND_BRANCH, STATE_UNDEF):
4829 /* Convert uncond branch jmp lab -> br lab. */
4830 if (target_is_430x ())
4831 cc = msp430x_rcodes + 7;
4832 else
4833 cc = msp430_rcodes + 7;
4834 where = fragP->fr_literal + fragP->fr_fix;
4835 bfd_putl16 (cc->lop0, where);
4836 rela = BFD_RELOC_MSP430_RL_PCREL;
4837 fragP->fr_fix += 2;
4838 break;
4839
4840 case ENCODE_RELAX (STATE_SIMPLE_BRANCH, STATE_WORD):
4841 case ENCODE_RELAX (STATE_SIMPLE_BRANCH, STATE_UNDEF):
4842 {
4843 /* Other simple branches. */
4844 int insn = bfd_getl16 (fragP->fr_opcode);
4845
4846 insn &= 0xffff;
4847 /* Find actual instruction. */
4848 if (target_is_430x ())
4849 {
4850 for (i = 0; i < 7 && !cc; i++)
4851 if (msp430x_rcodes[i].sop == insn)
4852 cc = msp430x_rcodes + i;
4853 }
4854 else
4855 {
4856 for (i = 0; i < 7 && !cc; i++)
4857 if (msp430_rcodes[i].sop == insn)
4858 cc = & msp430_rcodes[i];
4859 }
4860
4861 if (!cc || !cc->name)
4862 as_fatal (_("internal inconsistency problem in %s: insn %04lx"),
4863 __FUNCTION__, (long) insn);
4864 where = fragP->fr_literal + fragP->fr_fix;
4865 bfd_putl16 (cc->lop0, where);
4866 bfd_putl16 (cc->lop1, where + 2);
4867 rela = BFD_RELOC_MSP430_RL_PCREL;
4868 fragP->fr_fix += 4;
4869 }
4870 break;
4871
4872 case ENCODE_RELAX (STATE_NOOV_BRANCH, STATE_WORD):
4873 case ENCODE_RELAX (STATE_NOOV_BRANCH, STATE_UNDEF):
4874 if (target_is_430x ())
4875 cc = msp430x_rcodes + 6;
4876 else
4877 cc = msp430_rcodes + 6;
4878 where = fragP->fr_literal + fragP->fr_fix;
4879 bfd_putl16 (cc->lop0, where);
4880 bfd_putl16 (cc->lop1, where + 2);
4881 bfd_putl16 (cc->lop2, where + 4);
4882 rela = BFD_RELOC_MSP430_RL_PCREL;
4883 fragP->fr_fix += 6;
4884 break;
4885
4886 case ENCODE_RELAX (STATE_EMUL_BRANCH, STATE_BITS10):
4887 {
4888 int insn = bfd_getl16 (fragP->fr_opcode + 2);
4889
4890 insn &= 0xffff;
4891 if (target_is_430x ())
4892 {
4893 for (i = 0; i < 4 && !hc; i++)
4894 if (msp430x_hcodes[i].op1 == insn)
4895 hc = msp430x_hcodes + i;
4896 }
4897 else
4898 {
4899 for (i = 0; i < 4 && !hc; i++)
4900 if (msp430_hcodes[i].op1 == insn)
4901 hc = &msp430_hcodes[i];
4902 }
4903 if (!hc || !hc->name)
4904 as_fatal (_("internal inconsistency problem in %s: ext. insn %04lx"),
4905 __FUNCTION__, (long) insn);
4906 rela = BFD_RELOC_MSP430_10_PCREL;
4907 /* Apply a fix for a first label if necessary.
4908 another fix will be applied to the next word of insn anyway. */
4909 if (hc->tlab == 2)
4910 fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol,
4911 fragP->fr_offset, TRUE, rela);
4912 fragP->fr_fix += 2;
4913 }
4914
4915 break;
4916
4917 case ENCODE_RELAX (STATE_EMUL_BRANCH, STATE_WORD):
4918 case ENCODE_RELAX (STATE_EMUL_BRANCH, STATE_UNDEF):
4919 {
4920 int insn = bfd_getl16 (fragP->fr_opcode + 2);
4921
4922 insn &= 0xffff;
4923 if (target_is_430x ())
4924 {
4925 for (i = 0; i < 4 && !hc; i++)
4926 if (msp430x_hcodes[i].op1 == insn)
4927 hc = msp430x_hcodes + i;
4928 }
4929 else
4930 {
4931 for (i = 0; i < 4 && !hc; i++)
4932 if (msp430_hcodes[i].op1 == insn)
4933 hc = & msp430_hcodes[i];
4934 }
4935 if (!hc || !hc->name)
4936 as_fatal (_("internal inconsistency problem in %s: ext. insn %04lx"),
4937 __FUNCTION__, (long) insn);
4938 rela = BFD_RELOC_MSP430_RL_PCREL;
4939 where = fragP->fr_literal + fragP->fr_fix;
4940 bfd_putl16 (hc->lop0, where);
4941 bfd_putl16 (hc->lop1, where + 2);
4942 bfd_putl16 (hc->lop2, where + 4);
4943 fragP->fr_fix += 6;
4944 }
4945 break;
4946
4947 default:
4948 as_fatal (_("internal inconsistency problem in %s: %lx"),
4949 __FUNCTION__, (long) fragP->fr_subtype);
4950 break;
4951 }
4952
4953 /* Now apply fix. */
4954 fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol,
4955 fragP->fr_offset, TRUE, rela);
4956 /* Just fixed 2 bytes. */
4957 fragP->fr_fix += 2;
4958 }
4959
4960 /* Relax fragment. Mostly stolen from hc11 and mcore
4961 which arches I think I know. */
4962
4963 long
msp430_relax_frag(segT seg ATTRIBUTE_UNUSED,fragS * fragP,long stretch ATTRIBUTE_UNUSED)4964 msp430_relax_frag (segT seg ATTRIBUTE_UNUSED, fragS * fragP,
4965 long stretch ATTRIBUTE_UNUSED)
4966 {
4967 long growth;
4968 offsetT aim = 0;
4969 symbolS *symbolP;
4970 const relax_typeS *this_type;
4971 const relax_typeS *start_type;
4972 relax_substateT next_state;
4973 relax_substateT this_state;
4974 const relax_typeS *table = md_relax_table;
4975
4976 /* Nothing to be done if the frag has already max size. */
4977 if (RELAX_STATE (fragP->fr_subtype) == STATE_UNDEF
4978 || RELAX_STATE (fragP->fr_subtype) == STATE_WORD)
4979 return 0;
4980
4981 if (RELAX_STATE (fragP->fr_subtype) == STATE_BITS10)
4982 {
4983 symbolP = fragP->fr_symbol;
4984 if (symbol_resolved_p (symbolP))
4985 as_fatal (_("internal inconsistency problem in %s: resolved symbol"),
4986 __FUNCTION__);
4987 /* We know the offset. calculate a distance. */
4988 aim = S_GET_VALUE (symbolP) - fragP->fr_address - fragP->fr_fix;
4989 }
4990
4991 if (!msp430_enable_relax)
4992 {
4993 /* Relaxation is not enabled. So, make all jump as long ones
4994 by setting 'aim' to quite high value. */
4995 aim = 0x7fff;
4996 }
4997
4998 this_state = fragP->fr_subtype;
4999 start_type = this_type = table + this_state;
5000
5001 if (aim < 0)
5002 {
5003 /* Look backwards. */
5004 for (next_state = this_type->rlx_more; next_state;)
5005 if (aim >= this_type->rlx_backward || !this_type->rlx_backward)
5006 next_state = 0;
5007 else
5008 {
5009 /* Grow to next state. */
5010 this_state = next_state;
5011 this_type = table + this_state;
5012 next_state = this_type->rlx_more;
5013 }
5014 }
5015 else
5016 {
5017 /* Look forwards. */
5018 for (next_state = this_type->rlx_more; next_state;)
5019 if (aim <= this_type->rlx_forward || !this_type->rlx_forward)
5020 next_state = 0;
5021 else
5022 {
5023 /* Grow to next state. */
5024 this_state = next_state;
5025 this_type = table + this_state;
5026 next_state = this_type->rlx_more;
5027 }
5028 }
5029
5030 growth = this_type->rlx_length - start_type->rlx_length;
5031 if (growth != 0)
5032 fragP->fr_subtype = this_state;
5033 return growth;
5034 }
5035
5036 /* Return FALSE if the fixup in fixp should be left alone and not
5037 adjusted. We return FALSE here so that linker relaxation will
5038 work. */
5039
5040 bfd_boolean
msp430_fix_adjustable(struct fix * fixp ATTRIBUTE_UNUSED)5041 msp430_fix_adjustable (struct fix *fixp ATTRIBUTE_UNUSED)
5042 {
5043 /* If the symbol is in a non-code section then it should be OK. */
5044 if (fixp->fx_addsy
5045 && ((S_GET_SEGMENT (fixp->fx_addsy)->flags & SEC_CODE) == 0))
5046 return TRUE;
5047
5048 return FALSE;
5049 }
5050
5051 /* Scan uleb128 subtraction expressions and insert fixups for them.
5052 e.g., .uleb128 .L1 - .L0
5053 Because relaxation may change the value of the subtraction, we
5054 must resolve them at link-time. */
5055
5056 static void
msp430_insert_uleb128_fixes(bfd * abfd ATTRIBUTE_UNUSED,asection * sec,void * xxx ATTRIBUTE_UNUSED)5057 msp430_insert_uleb128_fixes (bfd *abfd ATTRIBUTE_UNUSED,
5058 asection *sec, void *xxx ATTRIBUTE_UNUSED)
5059 {
5060 segment_info_type *seginfo = seg_info (sec);
5061 struct frag *fragP;
5062
5063 subseg_set (sec, 0);
5064
5065 for (fragP = seginfo->frchainP->frch_root;
5066 fragP; fragP = fragP->fr_next)
5067 {
5068 expressionS *exp, *exp_dup;
5069
5070 if (fragP->fr_type != rs_leb128 || fragP->fr_symbol == NULL)
5071 continue;
5072
5073 exp = symbol_get_value_expression (fragP->fr_symbol);
5074
5075 if (exp->X_op != O_subtract)
5076 continue;
5077
5078 /* FIXME: Skip for .sleb128. */
5079 if (fragP->fr_subtype != 0)
5080 continue;
5081
5082 exp_dup = xmemdup (exp, sizeof (*exp), sizeof (*exp));
5083 exp_dup->X_op = O_symbol;
5084 exp_dup->X_op_symbol = NULL;
5085
5086 /* Emit the SUB relocation first, since the SET relocation will write out
5087 the final value. */
5088 exp_dup->X_add_symbol = exp->X_op_symbol;
5089 fix_new_exp (fragP, fragP->fr_fix, 0,
5090 exp_dup, 0, BFD_RELOC_MSP430_SUB_ULEB128);
5091
5092 exp_dup->X_add_symbol = exp->X_add_symbol;
5093 /* Insert relocations to resolve the subtraction at link-time. */
5094 fix_new_exp (fragP, fragP->fr_fix, 0,
5095 exp_dup, 0, BFD_RELOC_MSP430_SET_ULEB128);
5096
5097 }
5098 }
5099
5100 /* Called after all assembly has been done. */
5101 void
msp430_md_end(void)5102 msp430_md_end (void)
5103 {
5104 if (check_for_nop)
5105 {
5106 if (gen_interrupt_nops)
5107 {
5108 gen_nop ();
5109 if (warn_interrupt_nops)
5110 as_warn (INSERT_NOP_AT_EOF);
5111 }
5112 else if (warn_interrupt_nops)
5113 as_warn (_(WARN_NOP_AT_EOF));
5114 }
5115
5116 /* Insert relocations for uleb128 directives, so the values can be recomputed
5117 at link time. */
5118 bfd_map_over_sections (stdoutput, msp430_insert_uleb128_fixes, NULL);
5119
5120 /* We have already emitted an error if any of the following attributes
5121 disagree with the attributes in the input assembly file. See
5122 msp430_object_attribute. */
5123 bfd_elf_add_proc_attr_int (stdoutput, OFBA_MSPABI_Tag_ISA,
5124 target_is_430x () ? OFBA_MSPABI_Val_ISA_MSP430X
5125 : OFBA_MSPABI_Val_ISA_MSP430);
5126
5127 bfd_elf_add_proc_attr_int (stdoutput, OFBA_MSPABI_Tag_Code_Model,
5128 large_model ? OFBA_MSPABI_Val_Code_Model_LARGE
5129 : OFBA_MSPABI_Val_Code_Model_SMALL);
5130
5131 bfd_elf_add_proc_attr_int (stdoutput, OFBA_MSPABI_Tag_Data_Model,
5132 large_model ? OFBA_MSPABI_Val_Code_Model_LARGE
5133 : OFBA_MSPABI_Val_Code_Model_SMALL);
5134
5135 /* The data region GNU attribute is ignored for the small memory model. */
5136 if (large_model)
5137 bfd_elf_add_obj_attr_int (stdoutput, OBJ_ATTR_GNU,
5138 Tag_GNU_MSP430_Data_Region, lower_data_region_only
5139 ? Val_GNU_MSP430_Data_Region_Lower
5140 : Val_GNU_MSP430_Data_Region_Any);
5141 }
5142
5143 /* Returns FALSE if there is a msp430 specific reason why the
5144 subtraction of two same-section symbols cannot be computed by
5145 the assembler. */
5146
5147 bfd_boolean
msp430_allow_local_subtract(expressionS * left,expressionS * right,segT section)5148 msp430_allow_local_subtract (expressionS * left,
5149 expressionS * right,
5150 segT section)
5151 {
5152 /* If the symbols are not in a code section then they are OK. */
5153 if ((section->flags & SEC_CODE) == 0)
5154 return TRUE;
5155
5156 if (S_IS_GAS_LOCAL (left->X_add_symbol) || S_IS_GAS_LOCAL (right->X_add_symbol))
5157 return TRUE;
5158
5159 if (left->X_add_symbol == right->X_add_symbol)
5160 return TRUE;
5161
5162 /* We have to assume that there may be instructions between the
5163 two symbols and that relaxation may increase the distance between
5164 them. */
5165 return FALSE;
5166 }
5167