xref: /netbsd/sys/arch/zaurus/dev/w100lcd.c (revision 66a4ca44)
1 /* $NetBSD: w100lcd.c,v 1.6 2022/05/28 10:36:23 andvar Exp $ */
2 /*
3  * Copyright (c) 2002, 2003  Genetec Corporation.  All rights reserved.
4  * Written by Hiroyuki Bessho for Genetec Corporation.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  * 3. The name of Genetec Corporation may not be used to endorse or
15  *    promote products derived from this software without specific prior
16  *    written permission.
17  *
18  * THIS SOFTWARE IS PROVIDED BY GENETEC CORPORATION ``AS IS'' AND
19  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
20  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
21  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL GENETEC CORPORATION
22  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28  * POSSIBILITY OF SUCH DAMAGE.
29  */
30 
31 /*
32  * LCD driver for Sharp Zaurus SL-C7x0/860, based on zlcd.c.
33  *
34  * Controlling LCD is done in w100.c.
35  *
36  * Codes in this file provide platform specific things including:
37  *   LCD panel geometry
38  *
39  * LCD on/off switch and backlight brightness are done in lcdctl.c.
40  */
41 #include <sys/cdefs.h>
42 __KERNEL_RCSID(0, "$NetBSD: w100lcd.c,v 1.6 2022/05/28 10:36:23 andvar Exp $");
43 
44 #include "lcdctl.h"
45 
46 #include <sys/param.h>
47 #include <sys/systm.h>
48 #include <sys/bus.h>
49 
50 #include <dev/cons.h>
51 #include <dev/wscons/wsconsio.h>
52 #include <dev/wscons/wsdisplayvar.h>
53 #include <dev/rasops/rasops.h>
54 #include <dev/wsfont/wsfont.h>
55 
56 #include <dev/hpc/hpcfbio.h>
57 
58 #include <arm/xscale/pxa2x0var.h>
59 #include <zaurus/dev/w100var.h>
60 
61 #include <zaurus/zaurus/zaurus_var.h>
62 #include <zaurus/dev/w100lcdvar.h>
63 #if NLCDCTL > 0
64 #include <zaurus/dev/lcdctlvar.h>
65 #endif
66 
67 /*
68  * wsdisplay glue
69  */
70 static struct w100_wsscreen_descr w100lcd_std_screen = {
71 	.c = {
72 		.name = "std",
73 		.textops = &w100_emulops,
74 		.fontwidth = 8,
75 		.fontheight = 16,
76 		.capabilities = WSSCREEN_WSCOLORS,
77 	},
78 	.depth = 16,			/* bits per pixel */
79 	.flags = 0,
80 };
81 
82 static const struct wsscreen_descr *w100lcd_scr_descr[] = {
83 	&w100lcd_std_screen.c
84 };
85 
86 static const struct wsscreen_list w100lcd_screen_list = {
87 	.nscreens = __arraycount(w100lcd_scr_descr),
88 	.screens = w100lcd_scr_descr,
89 };
90 
91 static int	w100lcd_ioctl(void *, void *, u_long, void *, int,
92 		    struct lwp *);
93 static int	w100lcd_show_screen(void *, void *, int,
94 		    void (*)(void *, int, int), void *);
95 
96 struct wsdisplay_accessops w100lcd_accessops = {
97 	w100lcd_ioctl,
98 	w100_mmap,
99 	w100_alloc_screen,
100 	w100_free_screen,
101 	w100lcd_show_screen,
102 	NULL,
103 	NULL,
104 	NULL,
105 };
106 
107 const struct w100_panel_geometry lcd_panel_geometry_c700 =
108 {
109 	480,			/* Width */
110 	640,			/* Height */
111 	W100_PANEL_ROTATE_CW,   /* Rotate */
112 };
113 
114 static int	w100lcd_match(device_t, cfdata_t, void *);
115 static void	w100lcd_attach(device_t, device_t, void *);
116 
117 CFATTACH_DECL_NEW(w100lcd, sizeof(struct w100_softc),
118     w100lcd_match, w100lcd_attach, NULL, NULL);
119 
120 static bool	w100lcd_suspend(device_t, const pmf_qual_t *);
121 static bool	w100lcd_resume(device_t, const pmf_qual_t *);
122 
123 static int
w100lcd_match(device_t parent,cfdata_t cf,void * aux)124 w100lcd_match(device_t parent, cfdata_t cf, void *aux)
125 {
126 
127 	if (ZAURUS_ISC860)
128 		return 1;
129 	return 0;
130 }
131 
132 static void
w100lcd_attach(device_t parent,device_t self,void * aux)133 w100lcd_attach(device_t parent, device_t self, void *aux)
134 {
135 	struct w100_softc *sc = device_private(self);
136 	struct pxaip_attach_args *pxa = (struct pxaip_attach_args *)aux;
137 	struct wsemuldisplaydev_attach_args aa;
138 
139 	sc->dev = self;
140 
141 	w100_attach_subr(sc, pxa->pxa_iot, &lcd_panel_geometry_c700);
142 
143 	aa.console = glass_console;
144 	aa.scrdata = &w100lcd_screen_list;
145 	aa.accessops = &w100lcd_accessops;
146 	aa.accesscookie = sc;
147 
148 	(void)config_found(self, &aa, wsemuldisplaydevprint, CFARGS_NONE);
149 
150 	if (!pmf_device_register(self, w100lcd_suspend, w100lcd_resume))
151 		aprint_error_dev(self, "couldn't establish power handler\n");
152 }
153 
154 void
w100lcd_cnattach(void)155 w100lcd_cnattach(void)
156 {
157 
158 	if (ZAURUS_ISC860)
159 		w100_cnattach(&w100lcd_std_screen, &lcd_panel_geometry_c700);
160 }
161 
162 /*
163  * power management
164  */
165 static bool
w100lcd_suspend(device_t dv,const pmf_qual_t * qual)166 w100lcd_suspend(device_t dv, const pmf_qual_t *qual)
167 {
168 	struct w100_softc *sc = device_private(dv);
169 
170 #if NLCDCTL > 0
171 	lcdctl_onoff(false);
172 #endif
173 	w100_suspend(sc);
174 
175 	return true;
176 }
177 
178 static bool
w100lcd_resume(device_t dv,const pmf_qual_t * qual)179 w100lcd_resume(device_t dv, const pmf_qual_t *qual)
180 {
181 	struct w100_softc *sc = device_private(dv);
182 
183 	w100_resume(sc);
184 #if NLCDCTL > 0
185 	lcdctl_onoff(true);
186 #endif
187 
188 	return true;
189 }
190 
191 /*
192  * wsdisplay accessops overrides
193  */
194 static int
w100lcd_ioctl(void * v,void * vs,u_long cmd,void * data,int flag,struct lwp * l)195 w100lcd_ioctl(void *v, void *vs, u_long cmd, void *data, int flag,
196     struct lwp *l)
197 {
198 	struct w100_softc *sc = (struct w100_softc *)v;
199 	struct hpcfb_fbconf *fbconf;
200 	struct hpcfb_dspconf *dspconf;
201 	int res = EINVAL;
202 
203 	switch (cmd) {
204 #if NLCDCTL > 0
205 	case WSDISPLAYIO_GETPARAM:
206 	case WSDISPLAYIO_SETPARAM:
207 		res = lcdctl_param(cmd, (struct wsdisplay_param *)data);
208 		break;
209 #endif
210 	case HPCFBIO_GCONF:
211 		fbconf = (struct hpcfb_fbconf *)data;
212 		if (fbconf->hf_conf_index != 0 &&
213 		    fbconf->hf_conf_index != HPCFB_CURRENT_CONFIG) {
214 			break;
215 		}
216 
217 		fbconf->hf_conf_index = 0;
218 		fbconf->hf_nconfs = 1;
219 		fbconf->hf_class = HPCFB_CLASS_RGBCOLOR;
220 		strlcpy(fbconf->hf_name, "Sharp Zaurus frame buffer",
221 		    sizeof(fbconf->hf_name));
222 		strlcpy(fbconf->hf_conf_name, "default",
223 		    sizeof(fbconf->hf_conf_name));
224 		fbconf->hf_width = sc->display_width;
225 		fbconf->hf_height = sc->display_height;
226 		fbconf->hf_baseaddr = (u_long)sc->active->buf_va;
227 		fbconf->hf_offset = 0;
228 		fbconf->hf_bytes_per_line = sc->display_width *
229 		    sc->active->depth / 8;
230 		fbconf->hf_nplanes = 1;
231 		fbconf->hf_bytes_per_plane = sc->display_width *
232 		    sc->display_height * sc->active->depth / 8;
233 		fbconf->hf_pack_width = sc->active->depth;
234 		fbconf->hf_pixels_per_pack = 1;
235 		fbconf->hf_pixel_width = sc->active->depth;
236 		fbconf->hf_access_flags = (0
237 					   | HPCFB_ACCESS_BYTE
238 					   | HPCFB_ACCESS_WORD
239 					   | HPCFB_ACCESS_DWORD);
240 		fbconf->hf_order_flags = 0;
241 		fbconf->hf_reg_offset = 0;
242 
243 		fbconf->hf_class_data_length = sizeof(struct hf_rgb_tag);
244 		fbconf->hf_u.hf_rgb.hf_flags = 0;
245 		fbconf->hf_u.hf_rgb.hf_red_width = 5;
246 		fbconf->hf_u.hf_rgb.hf_red_shift = 11;
247 		fbconf->hf_u.hf_rgb.hf_green_width = 6;
248 		fbconf->hf_u.hf_rgb.hf_green_shift = 5;
249 		fbconf->hf_u.hf_rgb.hf_blue_width = 5;
250 		fbconf->hf_u.hf_rgb.hf_blue_shift = 0;
251 		fbconf->hf_u.hf_rgb.hf_alpha_width = 0;
252 		fbconf->hf_u.hf_rgb.hf_alpha_shift = 0;
253 
254 		fbconf->hf_ext_size = 0;
255 		fbconf->hf_ext_data = NULL;
256 
257 		res = 0;
258 		break;
259 
260 	case HPCFBIO_SCONF:
261 		fbconf = (struct hpcfb_fbconf *)data;
262 		if (fbconf->hf_conf_index != 0 &&
263 		    fbconf->hf_conf_index != HPCFB_CURRENT_CONFIG) {
264 			break;
265 		}
266 		/* nothing to do because we have only one configuration */
267 		res = 0;
268 		break;
269 
270 	case HPCFBIO_GDSPCONF:
271 		dspconf = (struct hpcfb_dspconf *)data;
272 		if ((dspconf->hd_unit_index != 0 &&
273 		     dspconf->hd_unit_index != HPCFB_CURRENT_UNIT) ||
274 		    (dspconf->hd_conf_index != 0 &&
275 		     dspconf->hd_conf_index != HPCFB_CURRENT_CONFIG)) {
276 			break;
277 		}
278 
279 		dspconf->hd_unit_index = 0;
280 		dspconf->hd_nunits = 1;
281 		dspconf->hd_class = HPCFB_DSP_CLASS_COLORLCD;
282 		strlcpy(dspconf->hd_name, "Sharp Zaurus LCD",
283 		    sizeof(dspconf->hd_name));
284 		dspconf->hd_op_flags = 0;
285 		dspconf->hd_conf_index = 0;
286 		dspconf->hd_nconfs = 1;
287 		strlcpy(dspconf->hd_conf_name, "default",
288 		    sizeof(dspconf->hd_conf_name));
289 		dspconf->hd_width = sc->display_width;
290 		dspconf->hd_height = sc->display_height;
291 		dspconf->hd_xdpi = HPCFB_DSP_DPI_UNKNOWN;
292 		dspconf->hd_ydpi = HPCFB_DSP_DPI_UNKNOWN;
293 
294 		res = 0;
295 		break;
296 
297 	case HPCFBIO_SDSPCONF:
298 		dspconf = (struct hpcfb_dspconf *)data;
299 		if ((dspconf->hd_unit_index != 0 &&
300 		     dspconf->hd_unit_index != HPCFB_CURRENT_UNIT) ||
301 		    (dspconf->hd_conf_index != 0 &&
302 		     dspconf->hd_conf_index != HPCFB_CURRENT_CONFIG)) {
303 			break;
304 		}
305 		/*
306 		 * nothing to do
307 		 * because we have only one unit and one configuration
308 		 */
309 		res = 0;
310 		break;
311 
312 	case HPCFBIO_GOP:
313 	case HPCFBIO_SOP:
314 		/* currently not implemented...  */
315 		break;
316 
317 	default:
318 		break;
319 	}
320 
321 	if (res == EINVAL)
322 		res = w100_ioctl(v, vs, cmd, data, flag, l);
323 
324 	return res;
325 }
326 
327 static int
w100lcd_show_screen(void * v,void * cookie,int waitok,void (* cb_func)(void *,int,int),void * cb_arg)328 w100lcd_show_screen(void *v, void *cookie, int waitok,
329     void (*cb_func)(void *, int, int), void *cb_arg)
330 {
331 	int error;
332 
333 	error = w100_show_screen(v, cookie, waitok, cb_func, cb_arg);
334 	if (error)
335 		return (error);
336 
337 	/* Turn on LCD */
338 #if NLCDCTL > 0
339 	lcdctl_onoff(true);
340 #endif
341 
342 	return 0;
343 }
344