1 /* -----------------------------------------------------------------------------
2 Software License for The Fraunhofer FDK AAC Codec Library for Android
3 
4 © Copyright  1995 - 2018 Fraunhofer-Gesellschaft zur Förderung der angewandten
5 Forschung e.V. All rights reserved.
6 
7  1.    INTRODUCTION
8 The Fraunhofer FDK AAC Codec Library for Android ("FDK AAC Codec") is software
9 that implements the MPEG Advanced Audio Coding ("AAC") encoding and decoding
10 scheme for digital audio. This FDK AAC Codec software is intended to be used on
11 a wide variety of Android devices.
12 
13 AAC's HE-AAC and HE-AAC v2 versions are regarded as today's most efficient
14 general perceptual audio codecs. AAC-ELD is considered the best-performing
15 full-bandwidth communications codec by independent studies and is widely
16 deployed. AAC has been standardized by ISO and IEC as part of the MPEG
17 specifications.
18 
19 Patent licenses for necessary patent claims for the FDK AAC Codec (including
20 those of Fraunhofer) may be obtained through Via Licensing
21 (www.vialicensing.com) or through the respective patent owners individually for
22 the purpose of encoding or decoding bit streams in products that are compliant
23 with the ISO/IEC MPEG audio standards. Please note that most manufacturers of
24 Android devices already license these patent claims through Via Licensing or
25 directly from the patent owners, and therefore FDK AAC Codec software may
26 already be covered under those patent licenses when it is used for those
27 licensed purposes only.
28 
29 Commercially-licensed AAC software libraries, including floating-point versions
30 with enhanced sound quality, are also available from Fraunhofer. Users are
31 encouraged to check the Fraunhofer website for additional applications
32 information and documentation.
33 
34 2.    COPYRIGHT LICENSE
35 
36 Redistribution and use in source and binary forms, with or without modification,
37 are permitted without payment of copyright license fees provided that you
38 satisfy the following conditions:
39 
40 You must retain the complete text of this software license in redistributions of
41 the FDK AAC Codec or your modifications thereto in source code form.
42 
43 You must retain the complete text of this software license in the documentation
44 and/or other materials provided with redistributions of the FDK AAC Codec or
45 your modifications thereto in binary form. You must make available free of
46 charge copies of the complete source code of the FDK AAC Codec and your
47 modifications thereto to recipients of copies in binary form.
48 
49 The name of Fraunhofer may not be used to endorse or promote products derived
50 from this library without prior written permission.
51 
52 You may not charge copyright license fees for anyone to use, copy or distribute
53 the FDK AAC Codec software or your modifications thereto.
54 
55 Your modified versions of the FDK AAC Codec must carry prominent notices stating
56 that you changed the software and the date of any change. For modified versions
57 of the FDK AAC Codec, the term "Fraunhofer FDK AAC Codec Library for Android"
58 must be replaced by the term "Third-Party Modified Version of the Fraunhofer FDK
59 AAC Codec Library for Android."
60 
61 3.    NO PATENT LICENSE
62 
63 NO EXPRESS OR IMPLIED LICENSES TO ANY PATENT CLAIMS, including without
64 limitation the patents of Fraunhofer, ARE GRANTED BY THIS SOFTWARE LICENSE.
65 Fraunhofer provides no warranty of patent non-infringement with respect to this
66 software.
67 
68 You may use this FDK AAC Codec software or modifications thereto only for
69 purposes that are authorized by appropriate patent licenses.
70 
71 4.    DISCLAIMER
72 
73 This FDK AAC Codec software is provided by Fraunhofer on behalf of the copyright
74 holders and contributors "AS IS" and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES,
75 including but not limited to the implied warranties of merchantability and
76 fitness for a particular purpose. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
77 CONTRIBUTORS BE LIABLE for any direct, indirect, incidental, special, exemplary,
78 or consequential damages, including but not limited to procurement of substitute
79 goods or services; loss of use, data, or profits, or business interruption,
80 however caused and on any theory of liability, whether in contract, strict
81 liability, or tort (including negligence), arising in any way out of the use of
82 this software, even if advised of the possibility of such damage.
83 
84 5.    CONTACT INFORMATION
85 
86 Fraunhofer Institute for Integrated Circuits IIS
87 Attention: Audio and Multimedia Departments - FDK AAC LL
88 Am Wolfsmantel 33
89 91058 Erlangen, Germany
90 
91 www.iis.fraunhofer.de/amm
92 amm-info@iis.fraunhofer.de
93 ----------------------------------------------------------------------------- */
94 
95 /**************************** AAC encoder library ******************************
96 
97    Author(s):   M. Werner
98 
99    Description: Perceptual entropie module
100 
101 *******************************************************************************/
102 
103 #include "line_pe.h"
104 #include "sf_estim.h"
105 #include "bit_cnt.h"
106 
107 #include "genericStds.h"
108 
109 static const FIXP_DBL C1LdData =
110     FL2FXCONST_DBL(3.0 / LD_DATA_SCALING); /* C1 = 3.0 = log(8.0)/log(2) */
111 static const FIXP_DBL C2LdData = FL2FXCONST_DBL(
112     1.3219281 / LD_DATA_SCALING); /* C2 = 1.3219281 = log(2.5)/log(2) */
113 static const FIXP_DBL C3LdData = FL2FXCONST_DBL(0.5593573); /* 1-C2/C1 */
114 
115 /* constants that do not change during successive pe calculations */
FDKaacEnc_prepareSfbPe(PE_CHANNEL_DATA * RESTRICT const peChanData,const FIXP_DBL * RESTRICT const sfbEnergyLdData,const FIXP_DBL * RESTRICT const sfbThresholdLdData,const FIXP_DBL * RESTRICT const sfbFormFactorLdData,const INT * RESTRICT const sfbOffset,const INT sfbCnt,const INT sfbPerGroup,const INT maxSfbPerGroup)116 void FDKaacEnc_prepareSfbPe(PE_CHANNEL_DATA *RESTRICT const peChanData,
117                             const FIXP_DBL *RESTRICT const sfbEnergyLdData,
118                             const FIXP_DBL *RESTRICT const sfbThresholdLdData,
119                             const FIXP_DBL *RESTRICT const sfbFormFactorLdData,
120                             const INT *RESTRICT const sfbOffset,
121                             const INT sfbCnt, const INT sfbPerGroup,
122                             const INT maxSfbPerGroup) {
123   INT sfbGrp, sfb;
124   INT sfbWidth;
125   FIXP_DBL avgFormFactorLdData;
126   const FIXP_DBL formFacScaling =
127       FL2FXCONST_DBL((float)FORM_FAC_SHIFT / LD_DATA_SCALING);
128 
129   for (sfbGrp = 0; sfbGrp < sfbCnt; sfbGrp += sfbPerGroup) {
130     for (sfb = 0; sfb < maxSfbPerGroup; sfb++) {
131       if ((FIXP_DBL)sfbEnergyLdData[sfbGrp + sfb] >
132           (FIXP_DBL)sfbThresholdLdData[sfbGrp + sfb]) {
133         sfbWidth = sfbOffset[sfbGrp + sfb + 1] - sfbOffset[sfbGrp + sfb];
134         /* estimate number of active lines */
135         avgFormFactorLdData = ((-sfbEnergyLdData[sfbGrp + sfb] >> 1) +
136                                (CalcLdInt(sfbWidth) >> 1)) >>
137                               1;
138         peChanData->sfbNLines[sfbGrp + sfb] = (INT)CalcInvLdData(
139             (sfbFormFactorLdData[sfbGrp + sfb] + formFacScaling) +
140             avgFormFactorLdData);
141         /* Make sure sfbNLines is never greater than sfbWidth due to
142          * unaccuracies (e.g. sfbEnergyLdData[sfbGrp+sfb] = 0x80000000) */
143         peChanData->sfbNLines[sfbGrp + sfb] =
144             fMin(sfbWidth, peChanData->sfbNLines[sfbGrp + sfb]);
145       } else {
146         peChanData->sfbNLines[sfbGrp + sfb] = 0;
147       }
148     }
149   }
150 }
151 
152 /*
153    formula for one sfb:
154    pe = n * ld(en/thr),                if ld(en/thr) >= C1
155    pe = n * (C2 + C3 * ld(en/thr)),    if ld(en/thr) <  C1
156    n: estimated number of lines in sfb,
157    ld(x) = log(x)/log(2)
158 
159    constPart is sfbPe without the threshold part n*ld(thr) or n*C3*ld(thr)
160 */
FDKaacEnc_calcSfbPe(PE_CHANNEL_DATA * RESTRICT const peChanData,const FIXP_DBL * RESTRICT const sfbEnergyLdData,const FIXP_DBL * RESTRICT const sfbThresholdLdData,const INT sfbCnt,const INT sfbPerGroup,const INT maxSfbPerGroup,const INT * RESTRICT const isBook,const INT * RESTRICT const isScale)161 void FDKaacEnc_calcSfbPe(PE_CHANNEL_DATA *RESTRICT const peChanData,
162                          const FIXP_DBL *RESTRICT const sfbEnergyLdData,
163                          const FIXP_DBL *RESTRICT const sfbThresholdLdData,
164                          const INT sfbCnt, const INT sfbPerGroup,
165                          const INT maxSfbPerGroup,
166                          const INT *RESTRICT const isBook,
167                          const INT *RESTRICT const isScale) {
168   INT sfbGrp, sfb, thisSfb;
169   INT nLines;
170   FIXP_DBL logDataRatio;
171   FIXP_DBL scaleLd = (FIXP_DBL)0;
172   INT lastValIs = 0;
173 
174   FIXP_DBL pe = 0;
175   FIXP_DBL constPart = 0;
176   FIXP_DBL nActiveLines = 0;
177 
178   FIXP_DBL tmpPe, tmpConstPart, tmpNActiveLines;
179 
180   for (sfbGrp = 0; sfbGrp < sfbCnt; sfbGrp += sfbPerGroup) {
181     for (sfb = 0; sfb < maxSfbPerGroup; sfb++) {
182       tmpPe = (FIXP_DBL)0;
183       tmpConstPart = (FIXP_DBL)0;
184       tmpNActiveLines = (FIXP_DBL)0;
185 
186       thisSfb = sfbGrp + sfb;
187 
188       if (sfbEnergyLdData[thisSfb] > sfbThresholdLdData[thisSfb]) {
189         logDataRatio = sfbEnergyLdData[thisSfb] - sfbThresholdLdData[thisSfb];
190         nLines = peChanData->sfbNLines[thisSfb];
191 
192         FIXP_DBL factor = nLines << (LD_DATA_SHIFT + PE_CONSTPART_SHIFT + 1);
193         if (logDataRatio >= C1LdData) {
194           /* scale sfbPe and sfbConstPart with PE_CONSTPART_SHIFT */
195           tmpPe = fMultDiv2(logDataRatio, factor);
196           tmpConstPart = fMultDiv2(sfbEnergyLdData[thisSfb] + scaleLd, factor);
197         } else {
198           /* scale sfbPe and sfbConstPart with PE_CONSTPART_SHIFT */
199           tmpPe = fMultDiv2(
200               ((FIXP_DBL)C2LdData + fMult(C3LdData, logDataRatio)), factor);
201           tmpConstPart =
202               fMultDiv2(((FIXP_DBL)C2LdData +
203                          fMult(C3LdData, sfbEnergyLdData[thisSfb] + scaleLd)),
204                         factor);
205 
206           nLines = fMultI(C3LdData, nLines);
207         }
208         tmpNActiveLines = (FIXP_DBL)nLines;
209       } else if (isBook[thisSfb]) {
210         /* provide for cost of scale factor for Intensity */
211         INT delta = isScale[thisSfb] - lastValIs;
212         lastValIs = isScale[thisSfb];
213         peChanData->sfbPe[thisSfb] = FDKaacEnc_bitCountScalefactorDelta(delta)
214                                      << PE_CONSTPART_SHIFT;
215         peChanData->sfbConstPart[thisSfb] = 0;
216         peChanData->sfbNActiveLines[thisSfb] = 0;
217       }
218       peChanData->sfbPe[thisSfb] = tmpPe;
219       peChanData->sfbConstPart[thisSfb] = tmpConstPart;
220       peChanData->sfbNActiveLines[thisSfb] = tmpNActiveLines;
221 
222       /* sum up peChanData values */
223       pe += tmpPe;
224       constPart += tmpConstPart;
225       nActiveLines += tmpNActiveLines;
226     }
227   }
228 
229   /* correct scaled pe and constPart values */
230   peChanData->pe = pe >> PE_CONSTPART_SHIFT;
231   peChanData->constPart = constPart >> PE_CONSTPART_SHIFT;
232 
233   peChanData->nActiveLines = nActiveLines;
234 }
235