1# 2# @(#)Longshin 6.17 03/12/12 3# 4# xmcd CD-ROM vendor configuration file 5# 6# xmcd - Motif(R) CD Audio Player/Ripper 7# 8# Copyright (C) 1993-2004 Ti Kan 9# E-mail: xmcd@amb.org 10# 11# This program is free software; you can redistribute it and/or modify 12# it under the terms of the GNU General Public License as published by 13# the Free Software Foundation; either version 2 of the License, or 14# (at your option) any later version. 15# 16# This program is distributed in the hope that it will be useful, 17# but WITHOUT ANY WARRANTY; without even the implied warranty of 18# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19# GNU General Public License for more details. 20# 21# You should have received a copy of the GNU General Public License 22# along with this program; if not, write to the Free Software 23# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 24# 25# 26# Install this file as LIBDIR/config/.tbl/Longshin 27# LIBDIR is the XMcd.libdir resource (or XMCD_LIBDIR env variable). 28# Please send corrections/additions to "xmcd@amb.org". 29# 30# Do not remove the following lines. 31# tblver=6 32# tblalias=Longshine 33# 34# File format (colon separated): 35# model:mode:vcode:pmsf:p12:p10:pti:ld:ej:mdbd:m10:vctl:vbase:vtaper:paus:\ 36# strict:ppp:lk:cp:tur:chg:ndisc:sp:msel:dens:rdcmd:be 37# 38# where, 39# model Drive model number (text string) 40# mode SCSI version (1, 2, or 0 if not SCSI pass-through) 41# vcode Vendor/Method code number 42# SCSI: vendor codes are defined in scsipt.h 43# non-SCSI: method codes are defined in libdi.h 44# pmsf "Play Audio MSF" command support 45# p12 "Play Audio (12)" command support 46# p10 "Play Audio (10)" command support 47# pti "Play Audio Track Index" command support 48# ld Disc load via "Start/Stop Unit" command 49# ej Disc eject via "Start/Stop Unit" command 50# mdbd DBD bit support in "Mode Sense" commands 51# m10 Use 10-byte version of Mode Sense/Select commands 52# vctl Software controls support (0-7) 53# 0 = none 54# 1 = volume control supported 55# 2 = balance control supported 56# 3 = volume/balance controls supported 57# 4 = channel routing control supported 58# 5 = volume/channel routing controls supported 59# 6 = balance/channel routing controls supported 60# 7 = volume/balance/channel routing controls supported 61# vbase Volume base value (0-255) 62# vtaper Volume control taper characteristics (0-2) 63# 0 = linear taper 64# 1 = square taper 65# 2 = inverse square taper 66# paus "Pause/Resume" command support 67# strict Need strict pause/resume symmetry 68# ppp Need pause to issue new play command 69# lk "Prevent/Allow Medium Removal" command support 70# cp "Read Subchannel" command Data Format 1 support 71# tur Whether the drive returns failure to the Test Unit Ready 72# command when playing audio. 73# chg Multi-disc changer method code number 74# 0 = not a multi-disc changer 75# 1 = SCSI LUN addressing method 76# 2 = SCSI medium changer method 77# 3 = OS ioctl method 78# ndisc Number of discs supported by drive 79# sp Spin-up interval in seconds 80# msel Whether to send "Mode Select" command to set CDDA mode 81# dens CDDA mode select density code (common values are 0 or 130) 82# rdcmd The CDDA SCSI read command to use 83# 0 = MMC "Read CD (12)" 84# 1 = SCSI "Read (10)" 85# 2 = NEC "Read CD-DA (10)" 86# 3 = Sony "Read CD-DA (12)" 87# be Whether the drive returns CDDA data in big-endian format 88# 89# Except otherwise noted above, the legal value for all fields 90# is 0 or 1. 91# 92LCS-7260:0:1:1:0:0:1:1:1:0:0:3:0:0:1:0:0:0:0:0:0:1:3:0:0:0:0 93