1# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC
2
3[vendor]
4# Vendor name will be shown by the Config Wizard.
5name = LulzBot
6config_version = 0.0.2
7config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LulzBot/
8
9[printer_model:MINI_AERO]
10name = Mini Aero
11variants = 0.5
12technology = FFF
13#bed_model = mini_bed.stl
14#bed_texture = mini.svg
15default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot
16
17[printer_model:TAZ6_AERO]
18name = Taz6 Aero
19variants = 0.5
20technology = FFF
21default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot
22
23[print:0.3mm @lulzbot]
24avoid_crossing_perimeters = 0
25bottom_fill_pattern = rectilinear
26bottom_solid_layers = 3
27bridge_acceleration = 500
28bridge_angle = 0
29bridge_flow_ratio = 1
30bridge_speed = 30
31brim_width = 0
32clip_multipart_objects = 0
33compatible_printers =
34compatible_printers_condition =
35complete_objects = 0
36default_acceleration = 500
37dont_support_bridges = 1
38elefant_foot_compensation = 0
39ensure_vertical_shell_thickness = 0
40external_perimeter_extrusion_width = 0.56
41external_perimeter_speed = 50%
42external_perimeters_first = 0
43extra_perimeters = 1
44extruder_clearance_height = 20
45extruder_clearance_radius = 20
46extrusion_width = 0.56
47fill_angle = 45
48fill_density = 20%
49fill_pattern = gyroid
50first_layer_acceleration = 500
51first_layer_extrusion_width = 0.6
52first_layer_height = 100%
53first_layer_speed = 40%
54gap_fill_speed = 20
55gcode_comments = 0
56gcode_label_objects = 0
57infill_acceleration = 500
58infill_every_layers = 1
59infill_extruder = 1
60infill_extrusion_width = 0.56
61infill_first = 0
62infill_only_where_needed = 0
63infill_overlap = 25%
64infill_speed = 60
65inherits =
66interface_shells = 0
67layer_height = 0.3
68max_print_speed = 80
69max_volumetric_speed = 0
70min_skirt_length = 0
71notes =
72only_retract_when_crossing_perimeters = 1
73ooze_prevention = 0
74output_filename_format = [printer_settings_id]_[input_filename_base]_[layer_height]_[filament_type]_[print_time].gcode
75overhangs = 1
76perimeter_acceleration = 500
77perimeter_extruder = 1
78perimeter_extrusion_width = 0.56
79perimeter_speed = 60
80perimeters = 3
81post_process =
82raft_layers = 0
83resolution = 0
84seam_position = nearest
85single_extruder_multi_material_priming = 1
86skirt_distance = 3
87skirt_height = 1
88skirts = 3
89slice_closing_radius = 0.049
90small_perimeter_speed = 15
91solid_infill_below_area = 70
92solid_infill_every_layers = 0
93solid_infill_extruder = 1
94solid_infill_extrusion_width = 0.56
95solid_infill_speed = 60
96spiral_vase = 0
97standby_temperature_delta = -5
98support_material = 0
99support_material_angle = 0
100support_material_auto = 1
101support_material_buildplate_only = 0
102support_material_contact_distance = 0.2
103support_material_enforce_layers = 0
104support_material_extruder = 1
105support_material_extrusion_width = 0.44
106support_material_interface_contact_loops = 0
107support_material_interface_extruder = 1
108support_material_interface_layers = 3
109support_material_interface_spacing = 0
110support_material_interface_speed = 100%
111support_material_pattern = rectilinear
112support_material_spacing = 2.5
113support_material_speed = 60
114support_material_synchronize_layers = 0
115support_material_threshold = 0
116support_material_with_sheath = 1
117support_material_xy_spacing = 50%
118thin_walls = 1
119threads = 12
120top_fill_pattern = rectilinear
121top_infill_extrusion_width = 0.52
122top_solid_infill_speed = 40
123top_solid_layers = 3
124travel_speed = 175
125wipe_tower = 0
126wipe_tower_bridging = 10
127wipe_tower_rotation_angle = 0
128wipe_tower_width = 60
129wipe_tower_x = 180
130wipe_tower_y = 140
131xy_size_compensation = 0
132
133[filament:ColorFabb PLA-PHA @lulzbot]
134filament_vendor = ColorFabb
135bed_temperature = 60
136bridge_fan_speed = 100
137compatible_printers =
138compatible_printers_condition =
139compatible_prints =
140compatible_prints_condition =
141cooling = 1
142disable_fan_first_layers = 3
143end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
144extrusion_multiplier = 1
145fan_always_on = 0
146fan_below_layer_time = 60
147filament_colour = #29B2B2
148filament_cooling_final_speed = 3.4
149filament_cooling_initial_speed = 2.2
150filament_cooling_moves = 4
151filament_cost = 0
152filament_density = 1.25
153filament_deretract_speed = nil
154filament_diameter = 2.85
155filament_load_time = 0
156filament_loading_speed = 28
157filament_loading_speed_start = 3
158filament_max_volumetric_speed = 0
159filament_minimal_purge_on_wipe_tower = 15
160filament_notes = ""
161filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
162filament_retract_before_travel = nil
163filament_retract_before_wipe = nil
164filament_retract_layer_change = nil
165filament_retract_length = nil
166filament_retract_lift = nil
167filament_retract_lift_above = nil
168filament_retract_lift_below = nil
169filament_retract_restart_extra = nil
170filament_retract_speed = nil
171filament_soluble = 0
172filament_toolchange_delay = 0
173filament_type = PLA
174filament_unload_time = 0
175filament_unloading_speed = 90
176filament_unloading_speed_start = 100
177filament_wipe = nil
178first_layer_bed_temperature = 60
179first_layer_temperature = 200
180inherits =
181max_fan_speed = 100
182min_fan_speed = 35
183min_print_speed = 10
184slowdown_below_layer_time = 5
185start_filament_gcode = "; Filament gcode\n"
186temperature = 200
187
188[filament:PrintedSolid Jesse PLA @lulzbot]
189filament_vendor = PrintedSolid
190bed_temperature = 60
191bridge_fan_speed = 100
192compatible_printers =
193compatible_printers_condition =
194compatible_prints =
195compatible_prints_condition =
196cooling = 1
197disable_fan_first_layers = 3
198end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
199extrusion_multiplier = 1
200fan_always_on = 0
201fan_below_layer_time = 60
202filament_colour = #29B2B2
203filament_cooling_final_speed = 3.4
204filament_cooling_initial_speed = 2.2
205filament_cooling_moves = 4
206filament_cost = 27
207filament_density = 1.25
208filament_deretract_speed = nil
209filament_diameter = 2.85
210filament_load_time = 0
211filament_loading_speed = 28
212filament_loading_speed_start = 3
213filament_max_volumetric_speed = 0
214filament_minimal_purge_on_wipe_tower = 15
215filament_notes = ""
216filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
217filament_retract_before_travel = nil
218filament_retract_before_wipe = nil
219filament_retract_layer_change = nil
220filament_retract_length = nil
221filament_retract_lift = nil
222filament_retract_lift_above = nil
223filament_retract_lift_below = nil
224filament_retract_restart_extra = nil
225filament_retract_speed = nil
226filament_soluble = 0
227filament_toolchange_delay = 0
228filament_type = PLA
229filament_unload_time = 0
230filament_unloading_speed = 90
231filament_unloading_speed_start = 100
232filament_wipe = nil
233first_layer_bed_temperature = 60
234first_layer_temperature = 220
235inherits =
236max_fan_speed = 100
237min_fan_speed = 35
238min_print_speed = 10
239slowdown_below_layer_time = 5
240start_filament_gcode = "; Filament gcode\n"
241temperature = 220
242
243[printer:Mini Aero 0.5mm]
244printer_model = MINI_AERO
245printer_variant = 0.5
246default_print_profile = 0.3mm @lulzbot
247default_filament_profile = PrintedSolid Jesse PLA @lulzbot
248bed_shape = 0x0,154x0,154x154,0x154
249before_layer_gcode =
250between_objects_gcode =
251cooling_tube_length = 5
252cooling_tube_retraction = 91.5
253deretract_speed = 20
254end_gcode = M400                                      ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0                                   ; disable hotend\nM107                                      ; disable fans\nG92 E1                                    ; set extruder to 1mm for retract on print end (LulzBot Cura had 5mm, might be a contributing factor to between print Aerostruder jamming)\nM117 Cooling please wait                  ; progress indicator message on LCD\nG1 X5 Y5 Z158 E0 F10000                   ; move to cooling position\nG1 E1                                     ; re-prime extruder\nM190 R40 ; wait for bed to cool down to removal temp\nM77					  ; Stop GLCD Timer\nG1 X145 F1000                             ; move extruder out of the way\nG1 Y175 F1000                             ; present finished print\nM140 S0; cool downs\nM84                                       ; disable steppers\nG90                                       ; absolute positioning\nM117 Print Complete.                      ; print complete message\n
255extra_loading_move = -2
256extruder_colour = ""
257extruder_offset = 0x0
258gcode_flavor = marlin
259high_current_on_filament_swap = 0
260inherits =
261layer_gcode =
262machine_max_acceleration_e = 10000,5000
263machine_max_acceleration_extruding = 1500,1250
264machine_max_acceleration_retracting = 1500,1250
265machine_max_acceleration_x = 9000,1000
266machine_max_acceleration_y = 9000,1000
267machine_max_acceleration_z = 100,200
268machine_max_feedrate_e = 40,120
269machine_max_feedrate_x = 800,200
270machine_max_feedrate_y = 800,200
271machine_max_feedrate_z = 8,12
272machine_max_jerk_e = 2.5,2.5
273machine_max_jerk_x = 20,10
274machine_max_jerk_y = 20,10
275machine_max_jerk_z = 0.2,0.4
276machine_min_extruding_rate = 0,0
277machine_min_travel_rate = 0,0
278max_layer_height = 0
279max_print_height = 158
280min_layer_height = 0.07
281nozzle_diameter = 0.5
282parking_pos_retraction = 92
283printer_notes = LulzBot Mini w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center.
284remaining_times = 0
285retract_before_travel = 2
286retract_before_wipe = 0%
287retract_layer_change = 1
288retract_length = 1
289retract_length_toolchange = 10
290retract_lift = 0
291retract_lift_above = 0
292retract_lift_below = 0
293retract_restart_extra = 0
294retract_restart_extra_toolchange = 0
295retract_speed = 40
296silent_mode = 0
297single_extruder_multi_material = 0
298start_gcode = ;This G-Code has been generated specifically for the LulzBot Mini with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28; home all axes\nG0 X0 Y187 Z156 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; soften filament before retraction\n;G1 E-15 F75 ; retract filament (LulzBot Cura is apparently trying to cold pull, might be a contributing factor to hob gear filling with filament)\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X45 Y173 F11520 ; move above wiper pad\nG1 Z0 F1200 ; push nozzle into wiper\nG1 X42 Y173 Z-.5 F4000 ; wiping\nG1 X52 Y171 Z-.5 F4000 ; wiping\nG1 X42 Y173 Z0 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X87 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X112 Y171 Z-0.5 F1000 ; wiping\nG1 Z10 ; raise extruder\nG28 X0 Y0 ; home X and Y\nG0 X0 Y187 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nM204 S300 ; set probing acceleration\nG29       ; start auto-leveling sequence\nM420 S1   ; enable leveling matrix\nM425 Z    ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S2000 ; restore standard acceleration\nG28 X0 Y0 ; re-home to account for build variance of earlier mini builds\nG0 X0 Y187 F200 ; move away from endstops\nG0 Y152 F4000 ; move in front of wiper pad\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]}  ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 Mini Printing... ; progress indicator message on LCD\nM221 S74 ; Printer specific extrusion modifier.
299thumbnails =
300toolchange_gcode =
301use_firmware_retraction = 0
302use_relative_e_distances = 0
303use_volumetric_e = 0
304variable_layer_height = 1
305wipe = 1
306z_offset = 0
307
308[printer:Taz6 Aero 0.5mm]
309printer_model = TAZ6_AERO
310printer_variant = 0.5
311default_print_profile = 0.3mm @lulzbot
312default_filament_profile = PrintedSolid Jesse PLA @lulzbot
313bed_shape = 0x0,280x0,280x280,0x280
314before_layer_gcode =
315between_objects_gcode =
316cooling_tube_length = 5
317cooling_tube_retraction = 91.5
318deretract_speed = 20
319end_gcode = M400                                      ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0                                   ; disable hotend\nM107                                      ; disable fans\nG91                                       ; relative positioning\nG1 E-1 F300                               ; filament retraction to release pressure\nG1 Z20 E-5 X-20 Y-20 F3000                ; lift up and retract even more filament\nG1 E6                                     ; re-prime extruder\nM117 Cooling please wait                  ; progress indicator message on LCD\nG90                                       ; absolute positioning\nG1 Y0 F3000                               ; move to cooling position\nM190 R40 ; wait for bed to cool down to removal temp\nG1 Y280 F3000                             ; present finished print\nM140 S0; cool downs\nM77					  ; stop GLCD timer\nM84                                       ; disable steppers\nG90                                       ; absolute positioning\nM117 Print Complete.                      ; print complete message\n
320extra_loading_move = -2
321extruder_colour = ""
322extruder_offset = 0x0
323gcode_flavor = marlin
324high_current_on_filament_swap = 0
325inherits =
326layer_gcode =
327machine_max_acceleration_e = 1000,5000
328machine_max_acceleration_extruding = 1000,1250
329machine_max_acceleration_retracting = 1000,1250
330machine_max_acceleration_x = 9000,1000
331machine_max_acceleration_y = 9000,1000
332machine_max_acceleration_z = 100,200
333machine_max_feedrate_e = 40,120
334machine_max_feedrate_x = 800,200
335machine_max_feedrate_y = 800,200
336machine_max_feedrate_z = 3,12
337machine_max_jerk_e = 2.5,2.5
338machine_max_jerk_x = 12,10
339machine_max_jerk_y = 12,10
340machine_max_jerk_z = 0.2,0.4
341machine_min_extruding_rate = 0,0
342machine_min_travel_rate = 0,0
343max_layer_height = 0
344max_print_height = 250
345min_layer_height = 0.07
346nozzle_diameter = 0.5
347parking_pos_retraction = 92
348printer_notes = LulzBot Taz 6 w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center.
349printer_technology = FFF
350remaining_times = 0
351retract_before_travel = 2
352retract_before_wipe = 0%
353retract_layer_change = 0
354retract_length = 2
355retract_length_toolchange = 10
356retract_lift = 0
357retract_lift_above = 0
358retract_lift_below = 0
359retract_restart_extra = 0
360retract_restart_extra_toolchange = 0
361retract_speed = 40
362silent_mode = 0
363single_extruder_multi_material = 0
364start_gcode = ;This G-Code has been generated specifically for the LulzBot TAZ 6 with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28 XY ; home X and Y\nG1 X-19 Y258 F1000 ; move to safe homing position\nM109 R{first_layer_temperature[0] - 60} ; soften filament before homing Z\nG28 Z ; home Z\nG1 E-15 F100 ; retract filament\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X-15 Y100 F3000 ; move above wiper pad\nG1 Z1 ; push nozzle into wiper\nG1 X-17 Y95 F1000 ; slow wipe\nG1 X-17 Y90 F1000 ; slow wipe\nG1 X-17 Y85 F1000 ; slow wipe\nG1 X-15 Y90 F1000 ; slow wipe\nG1 X-17 Y80 F1000 ; slow wipe\nG1 X-15 Y95 F1000 ; slow wipe\nG1 X-17 Y75 F2000 ; fast wipe\nG1 X-15 Y65 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y60 F2000 ; fast wipe\nG1 X-17 Y55 F2000 ; fast wipe\nG1 X-15 Y50 F2000 ; fast wipe\nG1 X-17 Y40 F2000 ; fast wipe\nG1 X-15 Y45 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y40 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y30 Z2 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y25 F2000 ; fast wipe\nG1 X-17 Y30 F2000 ; fast wipe\nG1 X-15 Y25 Z1.5 F1000 ; slow wipe\nG1 X-17 Y23 F1000 ; slow wipe\nG1 Z10 ; raise extruder\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nG1 X-9 Y-9 ; move above first probe point\nM204 S100 ; set probing acceleration\nG29          ; start auto-leveling sequence\nM420 S1      ; enable leveling matrix\nM425 Z       ; use measured Z backlash for compensation\nM425 Z F0    ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S500 ; restore standard acceleration\nG1 X0 Y0 Z15 F5000 ; move up off last probe point\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]}  ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 TAZ 6 Printing... ; progress indicator message on LCD\n
365thumbnails =
366toolchange_gcode =
367use_firmware_retraction = 0
368use_relative_e_distances = 0
369use_volumetric_e = 0
370variable_layer_height = 1
371wipe = 1
372z_offset = 0
373