1# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2# 2000, 2002, 2003, 2004, 2007, 2008, 2009, 2010, 2011 3# Free Software Foundation, Inc. 4 5# This program is free software; you can redistribute it and/or modify 6# it under the terms of the GNU General Public License as published by 7# the Free Software Foundation; either version 3 of the License, or 8# (at your option) any later version. 9# 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY; without even the implied warranty of 12# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13# GNU General Public License for more details. 14# 15# You should have received a copy of the GNU General Public License 16# along with this program. If not, see <http://www.gnu.org/licenses/>. 17 18# Based on break.exp, written by Rob Savoye. (rob@cygnus.com) 19# Modified to test gdb's handling of separate debug info files. 20# Modified to test gdb's handling of a debug-id retrieval. 21 22# This file has two parts. The first is testing that gdb behaves 23# normally after reading in an executable and its corresponding 24# separate debug file. The second moves the .debug file to a different 25# location and tests the "set debug-file-directory" command. 26# The third is for testing build-id retrievel by finding the separate 27# ".debug-id/ab/cdef.debug" file. 28 29 30if $tracelevel then { 31 strace $tracelevel 32} 33 34# 35# test running programs 36# 37 38set testfile "sepdebug" 39set srcfile ${testfile}.c 40set binfile ${objdir}/${subdir}/${testfile}${EXEEXT} 41 42if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}] != "" } { 43 untested sepdebug.exp 44 return -1 45} 46 47# Note: the procedure gdb_gnu_strip_debug will produce an executable called 48# ${binfile}, which is just like the executable ($binfile) but without 49# the debuginfo. Instead $binfile has a .gnudebuglink section which contains 50# the name of a debuginfo only file. This file will be stored in the 51# gdb.base/ subdirectory. 52 53if [gdb_gnu_strip_debug $binfile] { 54 # check that you have a recent version of strip and objcopy installed 55 unsupported "cannot produce separate debug info files" 56 return -1 57} 58 59gdb_exit 60gdb_start 61gdb_reinitialize_dir $srcdir/$subdir 62gdb_load ${binfile} 63if { $gdb_file_cmd_debug_info != "debug" } then { 64 fail "No debug information found." 65} 66 67if [target_info exists gdb_stub] { 68 gdb_step_for_stub; 69} 70# 71# test simple breakpoint setting commands 72# 73 74# 75# test break at function 76# 77gdb_test "break main" \ 78 "Breakpoint.*at.* file .*$srcfile, line.*" \ 79 "breakpoint function" 80 81# 82# test break at quoted function 83# 84gdb_test "break \"marker2\"" \ 85 "Breakpoint.*at.* file .*$srcfile, line.*" \ 86 "breakpoint quoted function" 87 88# 89# test break at function in file 90# 91gdb_test "break $srcfile:factorial" \ 92 "Breakpoint.*at.* file .*$srcfile, line.*" \ 93 "breakpoint function in file" 94 95set bp_location1 [gdb_get_line_number "set breakpoint 1 here"] 96 97# 98# test break at line number 99# 100# Note that the default source file is the last one whose source text 101# was printed. For native debugging, before we've executed the 102# program, this is the file containing main, but for remote debugging, 103# it's wherever the processor was stopped when we connected to the 104# board. So, to be sure, we do a list command. 105# 106gdb_test "list main" \ 107 ".*main \\(argc, argv, envp\\).*" \ 108 "use `list' to establish default source file" 109gdb_test "break $bp_location1" \ 110 "Breakpoint.*at.* file .*$srcfile, line $bp_location1\\." \ 111 "breakpoint line number" 112 113# 114# test duplicate breakpoint 115# 116gdb_test "break $bp_location1" \ 117 "Note: breakpoint \[0-9\]+ also set at pc.*Breakpoint \[0-9\]+ at.* file .*$srcfile, line $bp_location1\\." \ 118 "breakpoint duplicate" 119 120set bp_location2 [gdb_get_line_number "set breakpoint 2 here"] 121 122# 123# test break at line number in file 124# 125gdb_test "break $srcfile:$bp_location2" \ 126 "Breakpoint.*at.* file .*$srcfile, line $bp_location2\\." \ 127 "breakpoint line number in file" 128 129set bp_location3 [gdb_get_line_number "set breakpoint 3 here"] 130set bp_location4 [gdb_get_line_number "set breakpoint 4 here"] 131 132# 133# Test putting a break at the start of a multi-line if conditional. 134# Verify the breakpoint was put at the start of the conditional. 135# 136gdb_test "break multi_line_if_conditional" \ 137 "Breakpoint.*at.* file .*$srcfile, line $bp_location3\\." \ 138 "breakpoint at start of multi line if conditional" 139 140gdb_test "break multi_line_while_conditional" \ 141 "Breakpoint.*at.* file .*$srcfile, line $bp_location4\\." \ 142 "breakpoint at start of multi line while conditional" 143 144set bp_location5 [gdb_get_line_number "set breakpoint 5 here"] 145set bp_location6 [gdb_get_line_number "set breakpoint 6 here"] 146 147# 148# check to see what breakpoints are set 149# 150if [target_info exists gdb_stub] { 151 set main_line $bp_location5 152} else { 153 set main_line $bp_location6 154} 155 156set bp_location7 [gdb_get_line_number "set breakpoint 7 here"] 157set bp_location8 [gdb_get_line_number "set breakpoint 8 here"] 158set bp_location9 [gdb_get_line_number "set breakpoint 9 here"] 159 160gdb_test "info break" \ 161 "Num Type\[ \]+Disp Enb Address\[ \]+What.* 162\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$main_line.* 163\[0-9\]+\[\t \]+breakpoint keep y.* in marker2 at .*$srcfile:($bp_location8|$bp_location9).* 164\[0-9\]+\[\t \]+breakpoint keep y.* in factorial at .*$srcfile:$bp_location7.* 165\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location1.* 166\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location1.* 167\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location2.* 168\[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_if_conditional at .*$srcfile:$bp_location3.* 169\[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_while_conditional at .*$srcfile:$bp_location4" \ 170 "breakpoint info" 171 172# FIXME: The rest of this test doesn't work with anything that can't 173# handle arguments. 174# Huh? There doesn't *appear* to be anything that passes arguments 175# below. 176if [istarget "mips-idt-*"] then { 177 return 178} 179 180# 181# run until the breakpoint at main is hit. For non-stubs-using targets. 182# 183gdb_run_cmd 184gdb_expect { 185 -re "Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.* \{.*$gdb_prompt $" { 186 pass "run until function breakpoint" 187 } 188 -re "$gdb_prompt $" { 189 fail "run until function breakpoint" 190 } 191 timeout { 192 fail "run until function breakpoint (timeout)" 193 } 194} 195 196# 197# run until the breakpoint at a line number 198# 199gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location1.*$bp_location1\[\t \]+printf.*factorial.*" \ 200 "run until breakpoint set at a line number" 201 202# 203# Run until the breakpoint set in a function in a file 204# 205for {set i 6} {$i >= 1} {incr i -1} { 206 gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, factorial \\(value=$i\\) at .*$srcfile:$bp_location7.*$bp_location7\[\t \]+.*if .value > 1. \{.*" \ 207 "run until file:function($i) breakpoint" 208} 209 210# 211# Run until the breakpoint set at a quoted function 212# 213gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, (0x\[0-9a-f\]+ in )?marker2 \\(a=43\\) at .*$srcfile:($bp_location8|$bp_location9).*" \ 214 "run until quoted breakpoint" 215# 216# run until the file:function breakpoint at a line number in a file 217# 218gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location2.*$bp_location2\[\t \]+argc = \\(argc == 12345\\);.*" \ 219 "run until file:linenum breakpoint" 220 221# Test break at offset +1 222set bp_location10 [gdb_get_line_number "set breakpoint 10 here"] 223 224gdb_test "break +1" \ 225 "Breakpoint.*at.* file .*$srcfile, line $bp_location10\\." \ 226 "breakpoint offset +1" 227 228# Check to see if breakpoint is hit when stepped onto 229 230gdb_test "step" \ 231 ".*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location10.*$bp_location10\[\t \]+return argc;.*breakpoint 10 here.*" \ 232 "step onto breakpoint" 233 234# 235# delete all breakpoints so we can start over, course this can be a test too 236# 237delete_breakpoints 238 239# 240# test temporary breakpoint at function 241# 242 243gdb_test "tbreak main" "Temporary breakpoint.*at.* file .*$srcfile, line.*" "Temporary breakpoint function" 244 245# 246# test break at function in file 247# 248 249gdb_test "tbreak $srcfile:factorial" "Temporary breakpoint.*at.* file .*$srcfile, line.*" \ 250 "Temporary breakpoint function in file" 251 252# 253# test break at line number 254# 255 256gdb_test "tbreak $bp_location1" \ 257 "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location1.*" \ 258 "Temporary breakpoint line number #1" 259 260gdb_test "tbreak $bp_location6" \ 261 "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location6.*" \ 262 "Temporary breakpoint line number #2" 263 264# 265# test break at line number in file 266# 267 268gdb_test "tbreak $srcfile:$bp_location2" \ 269 "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location2.*" \ 270 "Temporary breakpoint line number in file #1" 271 272set bp_location11 [gdb_get_line_number "set breakpoint 11 here"] 273gdb_test "tbreak $srcfile:$bp_location11" "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location11.*" "Temporary breakpoint line number in file #2" 274 275# 276# check to see what breakpoints are set (temporary this time) 277# 278gdb_test "info break" "Num Type.*Disp Enb Address.*What.*\[\r\n\] 279\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$main_line.*\[\r\n\] 280\[0-9\]+\[\t \]+breakpoint del.*y.*in factorial at .*$srcfile:$bp_location7.*\[\r\n\] 281\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location1.*\[\r\n\] 282\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location6.*\[\r\n\] 283\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location2.*\[\r\n\] 284\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location11.*" \ 285 "Temporary breakpoint info" 286 287 288#*********** 289 290# Verify that catchpoints for fork, vfork and exec don't trigger 291# inappropriately. (There are no calls to those system functions 292# in this test program.) 293# 294if ![runto_main] then { fail "sepdebug tests suppressed" } 295 296gdb_test "catch" "Catch requires an event name.*" \ 297 "catch requires an event name" 298 299set name "set catch fork, never expected to trigger" 300gdb_test_multiple "catch fork" $name { 301 -re "Catchpoint \[0-9\]* .fork.*$gdb_prompt $" { 302 pass $name 303 } 304 -re "Catch of fork not yet implemented.*$gdb_prompt $" { 305 pass $name 306 } 307} 308 309# If we are on HP-UX 10.20, we expect an error message to be 310# printed if we type "catch vfork" at the gdb gdb_prompt. This is 311# because on HP-UX 10.20, we cannot catch vfork events. 312 313set name "set catch vfork, never expected to trigger" 314gdb_test_multiple "catch vfork" $name { 315 -re "Catch of vfork events not supported on HP-UX 10.20.*" { 316 pass $name 317 } 318 -re "Catchpoint \[0-9\]* .vfork.*$gdb_prompt $" { 319 pass $name 320 } 321 -re "Catch of vfork not yet implemented.*$gdb_prompt $" { 322 pass $name 323 } 324} 325 326set name "set catch exec, never expected to trigger" 327gdb_test_multiple "catch exec" $name { 328 -re "Catchpoint \[0-9\]* .exec.*$gdb_prompt $" { 329 pass $name 330 } 331 -re "Catch of exec not yet implemented.*$gdb_prompt $" { 332 pass $name 333 } 334} 335 336# Verify that GDB responds gracefully when asked to set a breakpoint 337# on a nonexistent source line. 338# 339 340gdb_test "break 999" "No line 999 in file .*" \ 341 "break on non-existent source line" 342 343# Run to the desired default location. If not positioned here, the 344# tests below don't work. 345# 346gdb_test "until $bp_location1" "main .* at .*:$bp_location1.*" "until bp_location1" 347 348 349# Verify that GDB allows one to just say "break", which is treated 350# as the "default" breakpoint. Note that GDB gets cute when printing 351# the informational message about other breakpoints at the same 352# location. We'll hit that bird with this stone too. 353# 354 355gdb_test "break" "Breakpoint \[0-9\]*.*" \ 356 "break on default location, 1st time" 357 358gdb_test "break" \ 359 "Note: breakpoint \[0-9\]* also set at .*Breakpoint \[0-9\]*.*" \ 360 "break on default location, 2nd time" 361 362gdb_test "break" \ 363 "Note: breakpoints \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*" \ 364 "break on default location, 3rd time" 365 366gdb_test "break" \ 367 "Note: breakpoints \[0-9\]*, \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*" \ 368 "break on default location, 4th time" 369 370# Verify that a "silent" breakpoint can be set, and that GDB is indeed 371# "silent" about its triggering. 372# 373if ![runto_main] then { fail "sepdebug tests suppressed" } 374 375gdb_test_multiple "break $bp_location1" \ 376 "set to-be-silent break bp_location1" { 377 -re "Breakpoint (\[0-9\]*) at .*, line $bp_location1.*$gdb_prompt $" { 378 pass "set to-be-silent break bp_location1" 379 } 380} 381 382send_gdb "commands $expect_out(1,string)\n" 383send_gdb "silent\n" 384send_gdb "end\n" 385gdb_expect { 386 -re ".*$gdb_prompt $"\ 387 {pass "set silent break bp_location1"} 388 timeout {fail "(timeout) set silent break bp_location1"} 389} 390 391gdb_test "info break $expect_out(1,string)" \ 392 "\[0-9\]*\[ \t\]*breakpoint.*:$bp_location1\r\n\[ \t\]*silent.*" \ 393 "info silent break bp_location1" 394 395gdb_test "continue" "Continuing.*" "hit silent break bp_location1" 396 397gdb_test "bt" "#0 main .* at .*:$bp_location1.*" \ 398 "stopped for silent break bp_location1" 399 400# Verify that GDB can at least parse a breakpoint with the 401# "thread" keyword. (We won't attempt to test here that a 402# thread-specific breakpoint really triggers appropriately. 403# The gdb.threads subdirectory contains tests for that.) 404# 405set bp_location12 [gdb_get_line_number "set breakpoint 12 here"] 406 407gdb_test "break $bp_location12 thread 999" "Unknown thread 999.*" \ 408 "thread-specific breakpoint on non-existent thread disallowed" 409 410gdb_test "break $bp_location12 thread foo" \ 411 "Junk after thread keyword.*" \ 412 "thread-specific breakpoint on bogus thread ID disallowed" 413 414# Verify that GDB responds gracefully to a breakpoint command with 415# trailing garbage. 416# 417 418gdb_test "break $bp_location12 foo" \ 419 "Junk at end of arguments.*" \ 420 "breakpoint with trailing garbage disallowed" 421 422# Verify that GDB responds gracefully to a "clear" command that has 423# no matching breakpoint. (First, get us off the current source line, 424# which we know has a breakpoint.) 425# 426 427gdb_test "next" "marker1.*" "step over breakpoint" 428 429gdb_test "clear 81" "No breakpoint at 81.*" \ 430 "clear line has no breakpoint disallowed" 431 432gdb_test "clear" "No breakpoint at this line.*" \ 433 "clear current line has no breakpoint disallowed" 434 435# Verify that we can set and clear multiple breakpoints. 436# 437# We don't test that it deletes the correct breakpoints. We do at 438# least test that it deletes more than one breakpoint. 439# 440gdb_test "break marker3" "Breakpoint.*at.*" "break marker3 #1" 441gdb_test "break marker3" "Breakpoint.*at.*" "break marker3 #2" 442gdb_test "clear marker3" {Deleted breakpoints [0-9]+ [0-9]+.*} 443 444# Verify that a breakpoint can be set via a convenience variable. 445# 446 447gdb_test_no_output "set \$foo=$bp_location11" \ 448 "set convenience variable \$foo to bp_location11" 449 450gdb_test "break \$foo" \ 451 "Breakpoint (\[0-9\]*) at .*, line $bp_location11.*" \ 452 "set breakpoint via convenience variable" 453 454# Verify that GDB responds gracefully to an attempt to set a 455# breakpoint via a convenience variable whose type is not integer. 456# 457 458gdb_test_no_output "set \$foo=81.5" \ 459 "set convenience variable \$foo to 81.5" 460 461gdb_test "break \$foo" \ 462 "Convenience variables used in line specs must have integer values.*" \ 463 "set breakpoint via non-integer convenience variable disallowed" 464 465# Verify that we can set and trigger a breakpoint in a user-called function. 466# 467 468gdb_test "break marker2" \ 469 "Breakpoint (\[0-9\]*) at .*, line ($bp_location8|$bp_location9).*" \ 470 "set breakpoint on to-be-called function" 471 472gdb_test "print marker2(99)" \ 473 "The program being debugged stopped while in a function called from GDB.\r\nEvaluation of the expression containing the function\r\n.marker2. will be abandoned.\r\nWhen the function is done executing, GDB will silently stop.*" \ 474 "hit breakpoint on called function" 475 476# As long as we're stopped (breakpointed) in a called function, 477# verify that we can successfully backtrace & such from here. 478# 479# In this and the following test, the _sr4export check apparently is needed 480# for hppa*-*-hpux. 481# 482 483gdb_test_multiple "bt" "backtrace while in called function" { 484 -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*_sr4export.*$gdb_prompt $" { 485 pass "backtrace while in called function" 486 } 487 -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*function called from gdb.*$gdb_prompt $" { 488 pass "backtrace while in called function" 489 } 490} 491 492# Return from the called function. For remote targets, it's important to do 493# this before runto_main, which otherwise may silently stop on the dummy 494# breakpoint inserted by GDB at the program's entry point. 495# 496 497gdb_test_multiple "finish" "finish from called function" { 498 -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.* in _sr4export.*$gdb_prompt $" { 499 pass "finish from called function" 500 } 501 -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*function called from gdb.*$gdb_prompt $" { 502 pass "finish from called function" 503 } 504 -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*Value returned.*$gdb_prompt $" { 505 pass "finish from called function" 506 } 507} 508 509# Verify that GDB responds gracefully to a "finish" command with 510# arguments. 511# 512if ![runto_main] then { fail "sepdebug tests suppressed" } 513 514gdb_test "finish 123" \ 515 "The \"finish\" command does not take any arguments.*" \ 516 "finish with arguments disallowed" 517 518# Verify that GDB responds gracefully to a request to "finish" from 519# the outermost frame. On a stub that never exits, this will just 520# run to the stubs routine, so we don't get this error... Thus the 521# second condition. 522# 523 524gdb_test_multiple "finish" "finish from outermost frame disallowed" { 525 -re "\"finish\" not meaningful in the outermost frame.*$gdb_prompt $" { 526 pass "finish from outermost frame disallowed" 527 } 528 -re "Run till exit from.*$gdb_prompt $" { 529 pass "finish from outermost frame disallowed" 530 } 531} 532 533# Verify that we can explicitly ask GDB to stop on all shared library 534# events, and that it does so. 535# 536if [istarget "hppa*-*-hpux*"] then { 537 if ![runto_main] then { fail "sepdebug tests suppressed" } 538 539 gdb_test_no_output "set stop-on-solib-events 1" \ 540 "set stop-on-solib-events" 541 542 gdb_test "run" \ 543 "Stopped due to shared library event.*" \ 544 "triggered stop-on-solib-events" \ 545 "Start it from the beginning.*y or n. $" \ 546 "y" 547 548 gdb_test_no_output "set stop-on-solib-events 0" \ 549 "reset stop-on-solib-events" 550} 551 552# Hardware breakpoints are unsupported on HP-UX. Verify that GDB 553# gracefully responds to requests to create them. 554# 555if [istarget "hppa*-*-hpux*"] then { 556 if ![runto_main] then { fail "sepdebug tests suppressed" } 557 558 gdb_test "hbreak" \ 559 "No hardware breakpoint support in the target.*" \ 560 "hw breaks disallowed" 561 562 gdb_test "thbreak" \ 563 "No hardware breakpoint support in the target.*" \ 564 "temporary hw breaks disallowed" 565} 566 567#******** 568 569 570# 571# Test "next" over recursive function call. 572# 573 574proc test_next_with_recursion {} { 575 global gdb_prompt 576 global decimal 577 global binfile 578 579 gdb_test "kill" "" "kill program" "Kill the program being debugged.*y or n. $" "y" 580 delete_breakpoints 581 582 gdb_test "break factorial" "Breakpoint $decimal at .*" "break at factorial" 583 584 # Run until we call factorial with 6 585 586 gdb_run_cmd 587 gdb_expect { 588 -re "Break.* factorial .value=6. .*$gdb_prompt $" {} 589 -re ".*$gdb_prompt $" { 590 fail "run to factorial(6)"; 591 gdb_suppress_tests; 592 } 593 timeout { fail "run to factorial(6) (timeout)" ; gdb_suppress_tests } 594 } 595 596 # Continue until we call factorial recursively with 5. 597 598 if [gdb_test "continue" \ 599 "Continuing.*Break.* factorial .value=5. .*" \ 600 "continue to factorial(5)"] then { gdb_suppress_tests } 601 602 # Do a backtrace just to confirm how many levels deep we are. 603 604 if [gdb_test "backtrace" \ 605 "#0\[ \t\]+ factorial .value=5..*" \ 606 "backtrace from factorial(5)"] then { gdb_suppress_tests } 607 608 # Now a "next" should position us at the recursive call, which 609 # we will be performing with 4. 610 611 if [gdb_test "next" \ 612 ".* factorial .value - 1.;.*" \ 613 "next to recursive call"] then { gdb_suppress_tests } 614 615 # Disable the breakpoint at the entry to factorial by deleting them all. 616 # The "next" should run until we return to the next line from this 617 # recursive call to factorial with 4. 618 # Buggy versions of gdb will stop instead at the innermost frame on 619 # the line where we are trying to "next" to. 620 621 delete_breakpoints 622 623 if [istarget "mips*tx39-*"] { 624 set timeout 60 625 } 626 # We used to set timeout here for all other targets as well. This 627 # is almost certainly wrong. The proper timeout depends on the 628 # target system in use, and how we communicate with it, so there 629 # is no single value appropriate for all targets. The timeout 630 # should be established by the Dejagnu config file(s) for the 631 # board, and respected by the test suite. 632 # 633 # For example, if I'm running GDB over an SSH tunnel talking to a 634 # portmaster in California talking to an ancient 68k board running 635 # a crummy ROM monitor (a situation I can only wish were 636 # hypothetical), then I need a large timeout. But that's not the 637 # kind of knowledge that belongs in this file. 638 639 gdb_test next "\[0-9\]*\[\t \]+return \\(value\\);.*" \ 640 "next over recursive call" 641 642 # OK, we should be back in the same stack frame we started from. 643 # Do a backtrace just to confirm. 644 645 set result [gdb_test "backtrace" \ 646 "#0\[ \t\]+ factorial .value=120.*\r\n#1\[ \t\]+ \[0-9a-fx\]+ in factorial .value=6..*" \ 647 "backtrace from factorial(5.1)"] 648 if { $result != 0 } { gdb_suppress_tests } 649 650 if [target_info exists gdb,noresults] { gdb_suppress_tests } 651 gdb_continue_to_end "recursive next test" 652 gdb_stop_suppressing_tests; 653} 654 655test_next_with_recursion 656 657 658#******** 659 660proc test_different_dir {type test_different_dir xfail} { 661 global srcdir subdir objdir binfile srcfile timeout gdb_prompt 662 global pf_prefix 663 global bp_location6 decimal hex 664 665 set old_pf_prefix $pf_prefix 666 append pf_prefix " $type:" 667 668 gdb_exit 669 gdb_start 670 gdb_reinitialize_dir $srcdir/$subdir 671 gdb_test_no_output "set debug-file-directory ${test_different_dir}" \ 672 "set separate debug location" 673 gdb_load ${binfile} 674 675 if [target_info exists gdb_stub] { 676 gdb_step_for_stub; 677 } 678 679 # 680 # test break at function 681 # 682 if {$xfail} { 683 setup_xfail "*-*-*" 684 } 685 gdb_test "break main" \ 686 "Breakpoint.*at.* file .*$srcfile, line.*" \ 687 "breakpoint function, optimized file" 688 689 # 690 # test break at function 691 # 692 if {$xfail} { 693 setup_xfail "*-*-*" 694 } 695 gdb_test "break marker4" \ 696 "Breakpoint.*at.* file .*$srcfile, line.*" \ 697 "breakpoint small function, optimized file" 698 699 # 700 # run until the breakpoint at main is hit. For non-stubs-using targets. 701 # 702 gdb_run_cmd 703 if {$xfail} { 704 setup_xfail "*-*-*" 705 } 706 gdb_expect { 707 -re "Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.* \{.*$gdb_prompt $" { 708 pass "run until function breakpoint, optimized file" 709 } 710 -re "Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$gdb_prompt $" { 711 pass "run until function breakpoint, optimized file (code motion)" 712 } 713 -re "$gdb_prompt $" { 714 fail "run until function breakpoint, optimized file" 715 } 716 timeout { 717 fail "run until function breakpoint, optimized file (timeout)" 718 } 719 } 720 721 # 722 # run until the breakpoint at a small function 723 # 724 725 # 726 # Add a second pass pattern. The behavior differs here between stabs 727 # and dwarf for one-line functions. Stabs preserves two line symbols 728 # (one before the prologue and one after) with the same line number, 729 # but dwarf regards these as duplicates and discards one of them. 730 # Therefore the address after the prologue (where the breakpoint is) 731 # has no exactly matching line symbol, and GDB reports the breakpoint 732 # as if it were in the middle of a line rather than at the beginning. 733 734 set bp_location13 [gdb_get_line_number "set breakpoint 13 here"] 735 set bp_location14 [gdb_get_line_number "set breakpoint 14 here"] 736 if {$xfail} { 737 setup_xfail "*-*-*" 738 } 739 740 gdb_test_multiple "continue" "run until breakpoint set at small function, optimized file" { 741 -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*$gdb_prompt $" { 742 pass "run until breakpoint set at small function, optimized file" 743 } 744 -re "Breakpoint $decimal, $hex in marker4 \\(d=177601976\\) at .*$srcfile:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*$gdb_prompt $" { 745 pass "run until breakpoint set at small function, optimized file" 746 } 747 -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile:$bp_location14\[\r\n\]+$bp_location14\[\t \]+void marker4.*$gdb_prompt $" { 748 # marker4() is defined at line 46 when compiled with -DPROTOTYPES 749 pass "run until breakpoint set at small function, optimized file (line bp_location14)" 750 } 751 } 752 753 754 # Reset the default arguments for VxWorks 755 if [istarget "*-*-vxworks*"] { 756 set timeout 10 757 verbose "Timeout is now $timeout seconds" 2 758 gdb_test_no_output "set args main" 759 } 760 761 set pf_prefix $old_pf_prefix 762# proc test_different_dir 763} 764 765 766# now move the .debug file to a different location so that we can test 767# the "set debug-file-directory" command. 768 769set different_dir "${objdir}/${subdir}/${testfile}.dir" 770set debugfile "${different_dir}/${objdir}/${subdir}/${testfile}.debug" 771remote_exec build "rm -rf $different_dir" 772remote_exec build "mkdir -p [file dirname $debugfile]" 773remote_exec build "mv -f ${objdir}/${subdir}/${testfile}.debug $debugfile" 774 775test_different_dir debuglink $different_dir 0 776 777 778# Test CRC mismatch is reported. 779 780if {[build_executable sepdebug.exp sepdebug2 sepdebug2.c debug] != -1 781 && ![gdb_gnu_strip_debug ${objdir}/${subdir}/sepdebug2]} { 782 783 remote_exec build "cp ${debugfile} ${objdir}/${subdir}/sepdebug2.debug" 784 785 gdb_exit 786 gdb_start 787 gdb_reinitialize_dir $srcdir/$subdir 788 789 set escapedobjdirsubdir [string_to_regexp ${objdir}/${subdir}] 790 791 gdb_test "file ${objdir}/${subdir}/sepdebug2" "warning: the debug information found in \"${escapedobjdirsubdir}/sepdebug2\\.debug\" does not match \"${escapedobjdirsubdir}/sepdebug2\" \\(CRC mismatch\\)\\..*\\(no debugging symbols found\\).*" "CRC mismatch is reported" 792} 793 794 795# NT_GNU_BUILD_ID / .note.gnu.build-id test: 796 797set build_id_debug_filename [build_id_debug_filename_get $binfile] 798if ![string compare $build_id_debug_filename ""] then { 799 unsupported "build-id is not supported by the compiler" 800 801 # Spare debug files may confuse testsuite runs in the future. 802 remote_exec build "rm -f $debugfile" 803} else { 804 set build_id_debugself_filename [build_id_debug_filename_get $debugfile] 805 set test "build-id support by binutils" 806 set xfail 0 807 if ![string compare $build_id_debugself_filename ""] then { 808 unsupported $test 809 set xfail 1 810 } elseif {[string compare $build_id_debugself_filename $build_id_debug_filename] != 0} then { 811 fail $test 812 } else { 813 pass $test 814 } 815 816 file mkdir [file dirname ${objdir}/${subdir}/${build_id_debug_filename}] 817 remote_exec build "mv $debugfile ${objdir}/${subdir}/${build_id_debug_filename}" 818 819 test_different_dir build-id "${objdir}/${subdir}" $xfail 820 821 # Test also multiple directories can be specified. Without the build-id 822 # reference GDB would find the separate debug info just at the same 823 # location as the executable file. 824 825 test_different_dir multiple-dirs "/doesnotexist:${objdir}/${subdir}" $xfail 826 827 # Spare debug files may confuse testsuite runs in the future. 828 remote_exec build "rm -f ${objdir}/${subdir}/${build_id_debug_filename}" 829} 830