12007-12-29 H.J. Lu <hongjiu.lu@intel.com> 2 3 * config/tc-i386.c (md_show_usage): Add -mmnemonic, -msyntax, 4 -mindex-reg, -mnaked-reg and -mold-gcc. 5 62007-12-27 John David Anglin <dave.anglin@nrc-cnrc.gc.ca> 7 8 * config/tc-hppa.h (DWARF2_CIE_DATA_ALIGNMENT): Wrap negative 9 number in parens. 10 112007-12-23 H.J. Lu <hongjiu.lu@intel.com> 12 13 * config/tc-i386.c (set_intel_mnemonic): New. 14 (intel_mnemonic): Likewise. 15 (old_gcc): Likewise. 16 (OPTION_MMNEMONIC): Likewise. 17 (OPTION_MSYNTAX): Likewise. 18 (OPTION_MINDEX_REG): Likewise. 19 (OPTION_MNAKED_REG): Likewise. 20 (OPTION_MOLD_GCC): Likewise. 21 (md_pseudo_table): Add .intel_mnemonic and .att_mnemonic. 22 (match_template): Don't allow AT&T/Intel mnemonic if Intel/AT&T 23 mnemonic is specified. Don't allow old gcc support if old_gcc 24 is 0. 25 (md_longopts): Add -mmnemonic, -msyntax, -mindex-reg, 26 -mmnaked-reg and -mold-gcc. 27 (md_parse_option): Handle OPTION_MMNEMONIC, OPTION_MSYNTAX, 28 OPTION_MINDEX_REG, OPTION_MNAKED_REG and OPTION_MOLD_GCC. 29 30 * doc/c-i386.texi: Docoument -mmnemonic, -msyntax, --mnaked-reg 31 and AT&T mnemonic vs. Intel mnemonic. 32 332007-12-20 Bob Wilson <bob.wilson@acm.org> 34 35 * config/tc-xtensa.c (xtensa_elf_cons): Set frag flags for 36 expressions without suffixes. 37 (get_frag_property_flags): Preserve is_no_transform flag for frags 38 not marked as either instructions or literals. 39 402007-12-17 H.J. Lu <hongjiu.lu@intel.com> 41 42 * config/tc-i386.c (output_insn): Use ARRAY_SIZE. 43 (lex_got): Likewise. 44 452007-12-17 H.J. Lu <hongjiu.lu@intel.com> 46 47 * config/tc-i386.c (output_insn): Use FRAG_APPEND_1_CHAR 48 instead of frag_more/md_number_to_chars. 49 (md_short_jump_size): Removed. 50 (md_long_jump_size): Likewise. 51 (md_create_short_jump): Likewise. 52 (md_create_long_jump): Likewise. 53 542007-12-13 Bob Wilson <bob.wilson@acm.org> 55 56 * config/tc-xtensa.c (xg_symbolic_immeds_fit): Relax for weak 57 references but not weak definitions. 58 592007-12-12 Bob Wilson <bob.wilson@acm.org> 60 61 * config/tc-xtensa.c (xg_symbolic_immeds_fit): Do not relax calls to 62 weak symbols if longcalls are disabled. 63 642007-12-11 Sterling Augustine <sterling@tensilica.com> 65 Bob Wilson <bob.wilson@acm.org> 66 67 * config/tc-xtensa.c (frag_format_size): Handle frags that expand to 68 wide branches. 69 (get_aligned_diff): For RELAX_ALIGN_NEXT_OPCODE, skip to the next 70 non-empty frag to find the LOOP instruction. Change comma typo to 71 a semicolon. 72 (relax_frag_immed, convert_frag_immed): Rename wide_insn variable to 73 from_widen_insn. 74 752007-12-11 Alan Modra <amodra@bigpond.net.au> 76 77 * config/tc-m32r.c (md_begin): Mark .sbss as being bss style section. 78 792007-12-10 Richard Sandiford <rsandifo@nildram.co.uk> 80 81 * config/tc-mips.h (mips_nop_opcode): Declare. 82 (NOP_OPCODE): Define. 83 (mips_segment_info): New structure. 84 (TC_SEGMENT_INFO_TYPE): Use it instead of insn_label_list. 85 * config/tc-mips.c (label_list): Adjust for new TC_SEGMENT_INFO_TYPE. 86 (mips_record_mips16_mode): New function. 87 (install_insn): Call it. 88 (mips_align): Likewise. Turn the fill argument into an "int *". 89 Use frag_align_code for code segments if no fill data is given. 90 (s_align): Adjust call accordingly. 91 (mips_nop_opcode): New function. 92 (mips_handle_align): Use the first variable byte to decide which 93 nop sequence is needed. Use md_number_to_chars and mips16_nop_insn. 94 952007-12-07 Bob Wilson <bob.wilson@acm.org> 96 97 * config/tc-xtensa.c (O_pcrel): Define. 98 (suffix_relocs): Add pcrel suffix. 99 (md_pseudo_table): Add 4byte and 2byte directives. 100 (xtensa_elf_cons): Pass correct pcrel argument to fix_new_exp. 101 (xg_assemble_literal): Likewise. Check for O_pcrel. 102 (expression_maybe_register): Reorganize. Handle BFD_RELOC_32_PCREL. 103 (xg_valid_literal_expression): Allow O_pcrel. 104 (md_pcrel_from, md_apply_fix): Handle BFD_RELOC_32_PCREL. 105 (tc_gen_reloc): Fix punctuation in error message. 106 1072007-12-06 Bob Wilson <bob.wilson@acm.org> 108 109 * config/tc-xtensa.c (xg_force_frag_space): Delete. 110 (xg_finish_frag, xg_assemble_literal_space): Replace calls to it. 111 (xtensa_create_property_segments, xtensa_create_xproperty_segments): 112 Set output_section for new property sections. Use subseg_set and 113 seg_info instead of retrieve_segment_info. Adjust arguments to 114 add_xt_block_frags and add_xt_prop_frags. Use standard functions 115 to create frags and fix records. 116 (retrieve_segment_info): Delete. 117 (add_xt_block_frags, add_xt_prop_frags): Replace calls to 118 retrieve_segment_info. Remove unused xt_block_sec arguments. 119 1202007-12-04 Alan Modra <amodra@bigpond.net.au> 121 122 * config/tc-ppc.c (ppc_tc): Allow a space between toc symbol 123 name and bracket. 124 1252007-11-30 Bob Wilson <bob.wilson@acm.org> 126 127 * config/tc-xtensa.h (md_allow_eh_opt): Define. 128 1292007-11-29 Mark Shinwell <shinwell@codesourcery.com> 130 131 * config/tc-mips.c (mips_cpu_info_table): Add loongson2e 132 and loongson2f entries. 133 * doc/c-mips.texi: Document -march=loongson{2e,2f} options. 134 1352007-11-29 Martin Schwidefsky <schwidefsky@de.ibm.com> 136 137 * config/tc-s390.c (md_begin): If the -mesa option is specified 138 add zarch opcodes to the hash table only if there is no variant 139 that is available for the esa mode as well. 140 1412007-11-26 Thomas Ogrisegg <tom-bugs@gas.fnord.at> 142 143 * config/tc-alpha.c (assemble_insn): Don't segv on NULL reloc_operand. 144 1452007-11-19 Bob Wilson <bob.wilson@acm.org> 146 147 * config/xtensa-istack.h (tinsn_struct): Replace linenum field 148 with loc_directive_seen and debug_line. 149 * config/tc-xtensa.c: Include xtensa-istack.h after dwarf2dbg.h. 150 (xg_build_to_insn): Copy the new fields instead of linenum. 151 (xg_build_token_insn): Likewise. Abort on INSTR_LABEL_DEF and move 152 common code out of the switch. 153 (md_assemble): Set new tinsn fields from DWARF information. Call 154 dwarf2_consume_line_info. 155 (xg_assemble_vliw_tokens): Update the code to select the "best" line 156 number to use new information. Call dwarf2_gen_line_info instead 157 of dwarf2_emit_insn. 158 1592007-11-19 Bob Wilson <bob.wilson@acm.org> 160 161 * dwarf2dbg.h (dwarf2_loc_directive_seen): New. 162 * dwarf2dbg.c (loc_directive_seen): Make external and rename to... 163 (dwarf2_loc_directive_seen): ...this. 164 (dwarf2_emit_insn, dwarf2_consume_line_info) 165 (dwarf2_emit_label, dwarf2_directive_loc): Use new name. 166 1672007-11-19 Bob Wilson <bob.wilson@acm.org> 168 169 * dwarf2dbg.c (dwarf2_emit_label): Use dwarf2_consume_line_info. 170 1712007-11-19 Bob Wilson <bob.wilson@acm.org> 172 173 * dwarf2dbg.c (dwarf2_consume_line_info): New. 174 (dwarf2_emit_insn): Use it here. 175 (dwarf2_directive_loc): Fix check for consecutive .loc directives 176 when debug_type is DEBUG_DWARF2. 177 * dwarf2dbg.h (dwarf2_consume_line_info): New prototype. 178 * config/tc-ia64.c (ia64_flush_insns): Call dwarf2_consume_line_info. 179 (md_assemble): Likewise. 180 1812007-11-17 Thiemo Seufer <ths@mips.com> 182 183 * config/tc-mips.c (md_parse_option): Match mips_optimize to the -O 184 option supplied, but still keep mips_optimize == 2 as default value. 185 1862007-11-17 Thiemo Seufer <ths@mips.com> 187 188 * doc/as.texinfo: Document the new attribute value. 189 1902007-11-16 Eric B. Weddington <eric.weddington@atmel.com> 191 192 * config/tc-avr.c (mcu_types): Add ATmega32HVB device. 193 * doc/c-avr.texi: Likewise. 194 1952007-11-16 Eric B. Weddington <eric.weddington@atmel.com> 196 197 * config/tc-avr.c (mcu_types): Add ATmega1284P device. 198 * doc/c-avr.texi: Likewise. 199 2002007-11-14 Tristan Gingold <gingold@adacore.com> 201 202 * config/tc-ia64.c (AR_RUC): Defined. 203 (ar): Add "ar.ruc". 204 (specify_resource): Handle AR_RUC like AR_ITC. 205 2062007-11-13 Nick Clifton <nickc@redhat.com> 207 208 * config/tc-mn10300.c (mn10300_force_relocation): Force a reloc to 209 be generated for alignment fixups. 210 * config/tc-mn10300.h (TC_FORCE_RELOCATION): Call 211 mn10300_force_relocation. 212 2132007-11-12 Nick Clifton <nickc@redhat.com> 214 215 PR gas/5269 216 * config/tc-frv.c (md_show_usage): Rewrite usage description to 217 make it easier to translate. 218 * gas/po/gas.pot: Regenerate. 219 2202007-11-12 Tristan Gingold <gingold@adacore.com> 221 222 * config/tc-ppc.c (md_assemble): If -mregnames, when parsing 223 PPC_OPERAND_CR always parse as expression to allow register name 224 followed by an expression. 225 2262007-11-09 H.J. Lu <hongjiu.lu@intel.com> 227 228 * config/tc-i386.c (match_template): Re-order suffix check. 229 2302007-11-07 Bob Wilson <bob.wilson@acm.org> 231 232 * config/tc-xtensa.c (relaxable_section): Check for .eh_frame. 233 2342007-11-07 Eric B. Weddington <eweddington@cso.atmel.com> 235 236 * config/tc-avr.c (mcu_types): Add ATtiny88 device. 237 * doc/c-avr.texi: Likewise. 238 2392007-11-07 Anatoly Sokolov <aesok@post.ru> 240 241 * config/tc-avr.c (mcu_types): Add new devices: ATmega48P, 242 ATmega88P, ATmega168P, Atmega328P 243 * doc/c-avr.texi: Document new devices. 244 2452007-11-07 Tristan Gingold <gingold@adacore.com> 246 247 * config/tc-ppc.c (md_apply_fix): For PPC_TOC16 on XCOFF, uses 248 offset within the TOC instead of the VMA. 249 2502007-11-06 Paul Brook <paul@codesourcery.com> 251 252 * config/tc-arm.c (do_mull): Allow overlapping Rm for armv6. 253 2542007-11-06 Nick Clifton <nickc@redhat.com> 255 256 * ehopt.c (check_eh_frame): If md_allow_eh_opt is defined, invoke 257 it to see if the optimizations should be applied. 258 * config/tc-mn10300.h (md_allow_eh_opt): Define. Only allow call 259 frame optimization if linker relaxation is not enabled. 260 2612007-11-05 Danny Smith <dannysmith@users.sourceforge.net> 262 263 * read.c (ALIGN_LIMIT): Rename to ... 264 (TC_ALIGN_LIMIT): Guard against prior definition. 265 * config/tc-i386.h (TC_ALIGN_LIMIT)[TE_PE]: Define. 266 2672007-11-01 Sterling Augustine <sterling@tensilica.com> 268 269 * config/tc-xtensa.c (xtensa_symbol_new_hook): New. 270 (xtensa_mark_difference_of_two_symbols): New. 271 (xtensa_post_relax_hook): Call xtensa_mark_difference_of_two_symbols. 272 * config/tc-xtensa.h (xtensa_symfield_type): Add next_expr_symbol. 273 (tc_symbol_new_hook): Define. 274 2752007-11-01 H.J. Lu <hongjiu.lu@intel.com> 276 277 * config/tc-i386.c (md_assemble): Replace no_xsuf with 278 no_ldsuf. 279 (match_template): Likewise. 280 2812007-11-01 H.J. Lu <hongjiu.lu@intel.com> 282 283 * config/tc-i386.h (LONG_DOUBLE_MNEM_SUFFIX): Use a non-ascii 284 letter. 285 2862007-11-01 H.J. Lu <hongjiu.lu@intel.com> 287 288 * config/tc-i386.c (process_suffix): Check addrprefixop0 to 289 see if the address size override prefix changes the size of the 290 first operand. 291 (check_byte_reg): Don't warn if byteokintel is set. 292 (check_long_reg): Set i.suffix to QWORD_MNEM_SUFFIX if toqword 293 is set. 294 (check_qword_reg): Set i.suffix to LONG_MNEM_SUFFIX if todword 295 is set. 296 2972007-10-31 Eric B. Weddington <eweddington@cso.atmel.com> 298 299 * config/tc-avr.c (mcu_types): Remove devices that were never produced: 300 attiny10, atmega83, atmega85, atmega603. 301 * doc/c-avr.texi: Likewise. 302 3032007-10-30 Nick Clifton <nickc@redhat.com> 304 305 * config/tc-mn10300.c (tc_gen_reloc): Fix test that decides when 306 sym_diff relocs should be generated. 307 (md_apply_fix): Skip R_MN10300_ALIGN relocs. 308 (mn10300_fix_adjustable): Do not adjust R_MN10300_ALIGN relocs. 309 (mn10300_handle_align): New function. Generate R_MN10300_ALIGN 310 relocs to record alignment requests. 311 * config/tc-mn10300.h (TC_FORCE_RELOCATION_SUB_SAME): Also force 312 R_MN10300_ALIGN relocs. 313 (HANDLE_ALIGN): Define. Call mn10300_handle_align. 314 3152007-10-30 Nick Clifton <nickc@redhat.com> 316 317 * doc/as.texinfo (Section): Replace "subsegment" with 318 "subsection". 319 3202007-10-27 H.J. Lu <hongjiu.lu@intel.com> 321 322 PR gas/5221 323 * config/obj-elf.c (obj_elf_section): Handle optional 324 parameters for .pushsection. 325 326 * doc/as.texinfo: Document optional parameters for 327 .pushsection. 328 3292007-10-24 H.J. Lu <hongjiu.lu@intel.com> 330 331 * configure.in: Move AM_PROG_LIBTOOL after AC_GNU_SOURCE. 332 * configure: Regenerated. 333 3342007-10-24 Alan Modra <amodra@bigpond.net.au> 335 336 * Makefile.am (INCLUDES, DEP_INCLUDES): Remove -D_GNU_SOURCE. 337 Run "make dep-am". 338 * configure.in: Invoke AC_GNU_SOURCE. 339 * Makefile.in: Regenerate. 340 * config.in: Regenerate. 341 * configure: Regenerate. 342 3432007-10-19 Nick Clifton <nickc@redhat.com> 344 345 * expr.c (expr): Test md_allow_local_subtract (if defined) before 346 allowing the evaluation of an expression involving two symbols 347 defined in the same section. 348 * doc/internals.texi (md_allow_local_subtract): Document the new 349 macro. 350 * config/tc-mn10300.h (md_allow_local_subtract): Define. 351 (RELAX_EXPANSION_POSSIBLE): Define. 352 (MAX_RELOC_EXPANSION): Define. 353 (TC_FRAG_TYPE): Define. 354 * config/tc-mn10300.c (md_assemble): Mark fragments as containing code. 355 (tc_gen_reloc): Return an array of relocs. If necessary generate 356 two relocs to handle an expressions involving the difference of 357 two symbols. 358 (mn10300_fix_adjustable): Do not test TC_FORCE_RELOCATION_LOCAL 359 when then fixup is not pc-relative. 360 (mn10300_allow_local_subtract): New function. Determine when it 361 is safe to compute the difference between two symbols at assemble 362 time. 363 3642007-10-19 Alan Modra <amodra@bigpond.net.au> 365 366 * config/tc-ppc.c (ppc_parse_name): Skip leading '%'. 367 (md_assemble): When parsing PPC_OPERAND_CR, add '%' to set of 368 chars that can start a name. 369 3702007-10-18 Carlos O'Donell <carlos@systemhalted.org> 371 372 * config/tc-hppa.c (pa_ip): Fix comment typo. 373 (pa_comm): Likewise. 374 3752007-10-18 Nick Clifton <nickc@redhat.com> 376 377 PR gas/5172 378 * config/tc-arc.c (md_estimate_size_before_relax): Change error 379 message. 380 (md_convert_frag): Just call abort. 381 * config/tc-i860.c (md_estimate_size_before_relax): Change error 382 message. 383 * config/tc-i860.h (md_convert_frag): Just call abort. 384 * config/tc-ip2k.c (md_estimate_size_before_relax): Change error 385 message. 386 (md_convert_frag): Just call abort. 387 * config/tc-m68k.c (m68k_ip): Do not attempt translation of 388 architecture names. 389 PR gas/5174 390 * config/tc-arm.c: Fix formatting and spelling errors. 391 PR gas/5175 392 * config/tc-xc16x.c: Fix formatting and internationalization. 393 * po/gas.pot: Regenerate. 394 3952007-10-17 Nick Clifton <nickc@redhat.com> 396 397 PR gas/5173 398 * as.h (ieee_md_atof, vax_md_atof): New prototypes. 399 * read.c (s_float_space): Allow a zero length return from md_atof 400 if the error message has been set. 401 (float_cons): Likewise. 402 * config/atof-ieee.c (ieee_md_atof): New function. Performs the 403 md_atof() function in a generic way for IEEE using targets. 404 * config/atof-vax.c (md_atof): Rename to vax_md_atof. Use the 405 same error message as ieee_md_atof. 406 * tc-alpha.c (md_atof): Use ieee_md_atof. Remove #define of vax_md_atof. 407 * tc-arc.c (md_atof): Use ieee_md_atof. 408 * tc-arm.c (md_atof): Use sizeof (LITTLENUM_TYPE) instead of the 409 constant 2. Use a precision of 5 for the 'x' and 'p' types. 410 * tc-avr.c (md_atof): Use ieee_md_atof. 411 * tc-bfin.c (md_atof): Use ieee_md_atof. 412 * tc-cr16.c (md_atof): Use ieee_md_atof. 413 * tc-crx.c (md_atof): Use ieee_md_atof. 414 * tc-d10v.c (md_atof): Use ieee_md_atof. 415 * tc-d30v.c (md_atof): Use ieee_md_atof. 416 * tc-dlx.c (md_atof): Use ieee_md_atof. 417 * tc-fr30.c (md_atof): Use ieee_md_atof. 418 * tc-frv.c (md_atof): Use ieee_md_atof. 419 * tc-h8300.c (md_atof): Use ieee_md_atof. 420 * tc-hppa.c (md_atof): Use ieee_md_atof. 421 * tc-i370.c (md_atof): Use ieee_md_atof. 422 (i370_dc): Convert the 'E' type to 'f' before calling md_atof. 423 * tc-i386.c (md_atof): Use ieee_md_atof. 424 * tc-i860.c (md_atof): Use ieee_md_atof. 425 * tc-i960.c (md_atof): Use ieee_md_atof. 426 * tc-ia64.c (md_atof): Use the same error message as ieee_md_atof. 427 * tc-ip2k.c (md_atof): Use ieee_md_atof. 428 * tc-iq2000.c (md_atof): Use ieee_md_atof. 429 * tc-m32c.c (md_atof): Use ieee_md_atof. 430 * tc-m32r.c (md_atof): Use ieee_md_atof. 431 * tc-m68hc11.c (md_atof): Use ieee_md_atof. 432 * tc-m68k.c (md_atof): Use ieee_md_atof. 433 * tc-maxq.c (md_atof): Use ieee_md_atof. 434 * tc-mcore.c (md_atof): Use ieee_md_atof. 435 * tc-mep.c (md_atof): Use ieee_md_atof. 436 * tc-mips.c (md_atof): Use ieee_md_atof. 437 * tc-mmix.c (md_atof): Use ieee_md_atof. 438 * tc-mn10200.c (md_atof): Use ieee_md_atof. 439 * tc-mn10300.c (md_atof): Use ieee_md_atof. 440 * tc-msp430.c (md_atof): Use ieee_md_atof. 441 * tc-mt.c (md_atof): Use ieee_md_atof. 442 * tc-ns32k.c (md_atof): Use ieee_md_atof. 443 * tc-openrisc.c (md_atof): Use ieee_md_atof. 444 * tc-or32.c (md_atof): Use ieee_md_atof. 445 * tc-pdp11.c (md_atof): New function. Call vax_md_atof. 446 * tc-pj.c (md_atof): Use ieee_md_atof. 447 * tc-ppc.c (md_atof): Use ieee_md_atof. 448 * tc-s390.c (md_atof): Use ieee_md_atof. 449 * tc-score.c (md_atof): Use ieee_md_atof. 450 * tc-sh.c (md_atof): Use ieee_md_atof. 451 * tc-sparc.c (md_atof): Use ieee_md_atof. 452 * tc-spu.c (md_atof): Use ieee_md_atof. 453 * tc-tic30.c (md_atof): Use the same error message as ieee_md_atof. 454 * tc-tic4x.c (md_atof): Use the same error message as ieee_md_atof. 455 * tc-tic54.c (md_atof): Use ieee_md_atof. 456 * tc-v850.c (md_atof): Use ieee_md_atof. 457 * tc-vax.c (md_atof): New function. Call vax_md_atof. 458 * tc-xc16x.c (md_atof): Use ieee_md_atof. 459 * tc-xstormy16.c (md_atof): Use ieee_md_atof. 460 * tc-xtensa.c (md_atof): Use ieee_md_atof. 461 * tc-z8k.c (md_atof): Use ieee_md_atof. 462 * doc/internals.texi: Update description of md_atof function. 463 * po/gas.pot: Regenerate. 464 4652007-10-16 Bob Wilson <bob.wilson@acm.org> 466 467 * doc/as.texinfo (Overview): Add Xtensa --rename-section option. 468 4692007-10-16 Nick Clifton <nickc@redhat.com> 470 471 * config/obj-elf.c (obj_elf_type): Accept "common" as a valid 472 symbol type. 473 * doc/as.texinfo (.type): Document the types accepted by the 474 type pseudo op, including "common". 475 4762007-10-15 Peter Bergner <bergner@vnet.ibm.com> 477 478 * config/tc-ppc.c (ppc_setup_opcodes): Verify instructions are sorted 479 according to major opcode number. 480 4812007-10-15 Alan Modra <amodra@bigpond.net.au> 482 483 * read.c (do_s_func): Check asprintf return status. 484 * stabs.c (stabs_generate_asm_func): Likewise. 485 (stabs_generate_asm_endfunc): Likewise. 486 4872007-10-12 H.J. Lu <hongjiu.lu@intel.com> 488 489 * config/tc-i386.c (process_operands): Simplify implicit xmm0 490 handling. 491 4922007-10-12 H.J. Lu <hongjiu.lu@intel.com> 493 494 * config/tc-i386.c (process_operands): Check the firstxmm0 495 field in opcode_modifier for instruction with a implicit 496 xmm0 as the first operand. 497 4982007-10-12 Eric B. Weddington <eweddington@cso.atmel.com> 499 500 * config/tc-avr.c (mcu_types): Add new devices: AT90PWM2B, 501 AT90PWM3B. 502 * doc/c-avr.texi: Document new devices. 503 5042007-10-12 M R Swami Reddy <MR.Swami.Reddy@nsc.com> 505 506 * config/tc-cr16.c: Update the md_relax_table for 1 word b<cc> 507 instruction range information. 508 5092007-10-12 Daniel Jacobowitz <dan@codesourcery.com> 510 511 * doc/as.texinfo (Object Attributes): New chapter. 512 (Pseudo Ops): Document .gnu_attribute. 513 (LNS directives): Correct .loc_mark_labels documentation. 514 5152007-10-11 Nick Clifton <nickc@redhat.com> 516 517 * config/obj-elf.c (obj_elf_section): When pushing a section, if 518 there is a comma then the following argument must be a subsection 519 number. 520 5212007-10-11 H.J. Lu <hongjiu.lu@intel.com> 522 523 * doc/c-i386.texi: Update which instruction's operands are 524 swapped. 525 5262007-10-11 Nick Clifton <nickc@redhat.com> 527 528 PR gas/5161 529 * config/tc-ia64.c: Allow for translations of error and warning 530 messages. 531 * po/gas.pot: Regenerate. 532 533 PR gas/5158 534 * config/tc-h8300.c (tc_gen_reloc): Allow for translation of error 535 message. 536 * po/gas.pot: Regenerate. 537 538 PR gas/5155 539 * config/tc-msp430.c: Fix spelling typos. 540 5412007-10-11 Nick Clifton <nickc@redhat.com> 542 543 * doc/as.texinfo (Type): Fix typo: STT_FUNC not STT_FUNCTION. 544 5452007-10-08 Maciej W. Rozycki <macro@linux-mips.org> 546 547 * config/tc-mips.c (AT): Rename to... 548 (ATREG): ... this. 549 (AT): New definition. 550 (mips_set_options): Rename "noat" to "at"; change the type. 551 (mips_opts): Update accordingly. 552 (append_insn): Likewise. 553 (macro_build_ldst_constoffset): Likewise. 554 (load_address): Likewise. 555 (macro, macro2): Likewise. 556 (s_mipsset): Handle ".set at=REG". Update handling of ".set at" 557 and ".set noat". 558 5592007-10-08 Nick Clifton <nickc@redhat.com> 560 561 * doc/as.texinfo (Previous): Clarify explanation of the behaviour 562 of this pseudo-op and add a couple of examples. 563 5642007-10-08 Nick Clifton <nickc@redhat.com> 565 566 PR gas/5121 gas/5122 gas/5123 567 * Makefile.am (CFILES): Add cgen.c 568 (TARGET_CPU_CFILES): Add tc-iq2000.c, tc-maxq.c, tc-mt.c, 569 tc-tic4x.c and xtensa-relax.c. 570 (TARGET_CPU_HFILES): Add tc-iq2000.h, tc-maxq.h, tc-mt.h, 571 tc-tic4x.h and xtensa-relax.h. 572 (TARG_ENV_HFILES): Remove te-aux.h, te-delta.h, te-delt88.h, 573 te-ic960.h, te-linux.h. Add te-aix5.h, te-armeabi.h, 574 te-freebsd.h, te-gnu.h, te-interix.h, te-vxworks.h. 575 (CONFIG_ATOF_CFILES): New variable. 576 (POTFILES): Add CONFIG_ATOF_CFILES to dependencies. Fix typo with 577 dependency upon TARG_ENV_HFILES. 578 (DEPTC): Do not put "#include opcodes/<foo>-desc.h" into 579 cgen-desc.h when foo-desc.h does not exit. 580 Run make dep-am. 581 * Makefile.in: Regenerate. 582 * doc/Makefile.in: Regenerate. 583 * po/POTFILES.in: Regenerate. 584 PR gas/5124 gas/5125 585 * po/es.po: Regenerate. 586 * po/fr.po: Regenerate. 587 * po/gas.pot: Regenerate. 588 * po/rw.po: Regenerate. 589 * po/tr.po: Regenerate. 590 * config/obj-elf.c (obj_elf_vtable_inherit): Allow for translation 591 of error messages. 592 PR gas/5126 593 * config/obj-som.c: Likewise. 594 PR gas/5129 595 * config/tc-arc.c: Likewise. 596 PR gas/5131 gas/5132 597 * config/tc-arm.c: Likewise. 598 PR gas/5137 599 * config/tc-bfin.c: Likewise. 600 PR gas/5143 601 * config/tc-frv.c: Likewise. 602 PR gas/5142 603 * config/tc-dlx.c: Likewise. 604 6052007-10-08 Eric B. Weddington <eweddington@cso.atmel.com> 606 607 * config/tc-avr.c (mcu_types): Add new devices: ATtiny43U, 608 ATtiny48, AT90PWM216, AT90PWM316. 609 * doc/c-avr.texi: Document new devices. 610 6112007-10-08 Nick Clifton <nickc@redhat.com> 612 613 PR gas/5133 614 * config/tc-arm.c (md_apply_fix): Correct error message. 615 PR gas/5134 616 * config/tc-arm.c (md_apply_fix): Likewise. 617 PR gas/5136 618 * config/tc-bfin.c (md_apply_fix): Fix error message. 619 PR gas/5135 620 (Expr_Node_Gen_Reloc_R): Fix spelling typos in error messages. 621 6222007-10-05 H.J. Lu <hongjiu.lu@intel.com> 623 624 * config/tc-i386.c (build_modrm_byte): Check the first 2 8bit 625 immediate operands directly for instructions with 4 operands. 626 6272007-10-04 H.J. Lu <hongjiu.lu@intel.com> 628 629 PR gas/5109 630 * config/tc-i386.c (process_suffix): Clear QWORD suffix if it 631 is ignored in Intel mode. 632 6332007-10-04 Helge Deller <deller@gmx.de> 634 635 * read.c (potable): Add string8, string16, string32 and string64. 636 Add bit size for stringer function. 637 (stringer_append_char): New. 638 (stringer): Use stringer_append_char(). 639 * config/obj-coff.c (obj_coff_ident): Add bit size for stringer function. 640 * config/obj-elf.c (obj_elf_ident): Likewise. 641 * config/tc-alpha.c (s_alpha_stringer): Likewise. 642 * config/tc-dlx.c (dlx_pseudo_table): Likewise. 643 * config/tc-hppa.c (pa_stringer): Likewise. 644 * config/tc-ia64.c (md_pseudo_table, pseudo_opcode): Likewise. 645 * config/tc-m68hc11.c (md_pseudo_table): Likewise. 646 * config/tc-mcore.c (md_pseudo_table): Likewise. 647 * config/tc-mips.c (mips_pseudo_table): Likewise. 648 * config/tc-spu.c (md_pseudo_table): Likewise. 649 * config/tc-s390.c (md_pseudo_table): Likewise. Replace '2' by '1'. 650 * doc/as.texinfo (ABORT): Fix identing. 651 (String): Document new string8, string16, string32, string64 652 functions. 653 * NEWS: Mention the new feature. 654 6552007-10-03 Nick Clifton <nickc@redhat.com> 656 657 PR gas/5078 658 * config/tc-avr.c (avr_get_constant): Extend error message to 659 mention that the constant must be positive. 660 6612007-10-03 Nick Clifton <nickc@redhat.com> 662 663 * config/tc-avr.c (avr_get_constant): 664 PR gas/5089 665 * config/tc-arm.c (s_arm_unwind_handlerdata): Fix spelling typo. 666 PR gas/5090 667 (md_assemble): Fix spelling typo. 668 6692007-10-03 Alan Modra <amodra@bigpond.net.au> 670 671 PR 4303 672 * stabs.c (aout_process_stab): Set BSF_DEBUGGING. 673 6742007-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com> 675 676 * config/tc-cr16.c: Replaced 'tabs' with white spaces and 677 added R_CR16_DISP8 as default reloc type for b<cc> instructions. 678 6792007-09-30 H.J. Lu <hongjiu.lu@intel.com> 680 681 PR gas/5080 682 * config/tc-i386.c (check_long_reg): Also handle cvttss2si. 683 (check_qword_reg): Also handle cvttsd2si. 684 6852007-09-27 Kazu Hirata <kazu@codesourcery.com> 686 687 * config/m68k-parse.h (m68k_register): Use MBO instead of MBB. 688 (last_movec_reg): Change to MBO. 689 * config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB. 690 (m68k_ip): Use MBO instead of MBO. 691 (init_table): Use MBO instead of MBO. Add an entry for mbo. 692 6932007-09-26 Jan Beulich <jbeulich@novell.com> 694 695 * config/tc-i386.c (build_modrm_byte): Also check for RegEip 696 when considering IP-relative addressing. 697 6982007-09-26 Jan Beulich <jbeulich@novell.com> 699 700 * config/tc-i386.h (md_register_arithmetic): Define. 701 * config/tc-ia64.h (md_register_arithmetic): Likewise. 702 * doc/internals.texi: Document md_register_arithmetic. 703 * expr.c (make_expr_symbol): Force O_register expressions into 704 reg_section. 705 (expr): Provide default for md_register_arithmetic. Don't resolve 706 adding/subtracting constants to/from registers if 707 md_register_arithmetic is zero. 708 7092007-09-26 Jan Beulich <jbeulich@novell.com> 710 711 * dw2gencfi.c: Conditionalize whole body upon TARGET_USE_CFIPOP. 712 (cfi_finish): Add second empty instance. 713 7142007-09-26 Jan Beulich <jbeulich@novell.com> 715 716 * config/tc-ia64.c (dot_pred_rel): Replace specialized handling 717 with simple call to parse_operand. 718 7192007-09-26 Jan Beulich <jbeulich@novell.com> 720 721 * config/tc-i386.c (NUM_FLAG_CODE): Remove. 722 7232007-09-26 Jan Beulich <jbeulich@novell.com> 724 725 * as.c (itbl_parse): Remove #define. 726 (struct itbl_file_list): Move down and ... 727 (itbl_files): .. conditionalize upon HAVE_ITBL_CPU. 728 (show_usage): Conditionalize printing of --itbl option upon 729 HAVE_ITBL_CPU. 730 (parse_args): Conditionalize handling of -t/--itbl options upon 731 HAVE_ITBL_CPU. Remove OPTION_INSTTBL and replace its use with 732 't'. 733 7342007-09-25 H.J. Lu <hongjiu.lu@intel.com> 735 736 * config/tc-i386.c (output_insn): Use i.tm.opcode_length to 737 check opcode length. 738 7392007-09-25 Nathan Sidwell <nathan@codesourcery.com> 740 741 * config/tc-m68k.c (LONG_BRANCH_VIA_COND): New. 742 (BRANCHBWPL, FRAG_VAR_SIZE): New. 743 (md_relax_table): Add BRANCHBWPL entries. 744 (m68k_ip): Choose BRANCHBWPL relaxation if necessary. 745 (md_assemble): Use FRAG_VAR_SIZE. 746 (md_convert_frag_1): Add BRANCHBWPL cases. 747 (md_estimate_size_before_relaz): Likewise. 748 7492007-09-24 Carlos O'Donell <carlos@codesourcery.com> 750 751 * config/tc-mips.c (s_align): Set max_alignment to 28. 752 7532007-09-20 H.J. Lu <hongjiu.lu@intel.com> 754 755 PR 658 756 * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Removed. 757 (set_allow_index_reg): New. 758 (allow_index_reg): Likewise. 759 (md_pseudo_table): Add "allow_index_reg" and 760 "disallow_index_reg". 761 (build_modrm_byte): Set i.sib.index to NO_INDEX_REGISTER for 762 fake index registers. 763 (i386_scale): Updated. 764 (i386_index_check): Support fake index registers. 765 (parse_real_register): Return NULL on eiz/riz if fake index 766 registers aren't allowed. 767 7682007-09-19 Nick Clifton <nickc@redhat.com> 769 770 * config/tc-h8300.c (md_apply_fix): Do not abort or handle 8 byte 771 fixups. 772 7732007-09-19 Bob Wilson <bob.wilson@acm.org> 774 775 * doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo. 776 7772007-09-18 Bernd Schmidt <bernd.schmidt@analog.com> 778 779 * config/bfin-parse.y (asm_1): Slightly improve error messages 780 for "reg += const;". 781 7822007-09-18 Alan Modra <amodra@bigpond.net.au> 783 784 PR gas/5026 785 * read.c (emit_expr): Only use long long if required and available. 786 7872007-09-17 H.J. Lu <hongjiu.lu@intel.com> 788 789 * config/tc-i386.c (baseindex): Removed. 790 (build_modrm_byte): Check reg_num for RIP register instead of 791 reg_type. 792 (i386_index_check): Likewise. 793 7942007-09-17 H.J. Lu <hongjiu.lu@intel.com> 795 796 PR gas/5035 797 * config/obj-coff.c (obj_coff_endef): Remove checking size of 798 def_symbol_in_progress. 799 8002007-09-17 Evandro Menezes <evandro@yahoo.com> 801 802 PR gas/5026 803 * read.c (emit_expr): Use unsigned long long values in warning 804 message about truncated expressions. 805 8062007-09-17 H.J. Lu <hongjiu.lu@intel.com> 807 808 * config/tc-i386.c (intel_e04): Revert the last change. 809 8102007-09-17 Nick Clifton <nickc@redhat.com> 811 812 * po/es.po: Updated Spanish translation. 813 8142007-09-15 H.J. Lu <hongjiu.lu@intel.com> 815 816 PR gas/5034 817 * config/tc-i386.c (intel_e04): Return 1 if cur_token.code is 818 T_NIL. 819 8202007-09-14 H.J. Lu <hongjiu.lu@intel.com> 821 822 * config/tc-i386.c (build_modrm_byte): Adjust comment line 823 wrap. 824 8252007-09-14 H.J. Lu <hongjiu.lu@intel.com> 826 827 * config/tc-i386.c (build_modrm_byte): Use (A || B) instead 828 of (A || B) != 0. 829 8302007-09-14 H.J. Lu <hongjiu.lu@intel.com> 831 832 * config/tc-i386.c (build_modrm_byte): Adjust indentation. 833 8342007-09-14 Michael Meissner <michael.meissner@amd.com> 835 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com> 836 Tony Linthicum <tony.linthicum@amd.com> 837 838 * NEWS: Add SSE5 support to NEWS file. 839 840 * config/tc-i386.h (drex_byte): Add fields to allow process_drex 841 and build_modrm_byte to communicate. 842 (DREX_OC0): New SSE5 macro. 843 (DREX_OC0_MASK): Ditto. 844 (DREX_OC1): Ditto. 845 (DREX_OC1_MASK): Ditto. 846 (DREX_XMEM_X1_X2_X2): Ditto. 847 (DREX_X1_XMEM_X2_X2): Ditto. 848 (DREX_X1_XMEM_X2_X1: Ditto. 849 (DREX_X1_X2_XMEM_X1: Ditto. 850 (DREX_XMEM_X1_X2): Ditto. 851 (DREX_X1_XMEM_X2): Ditto. 852 (drex_byte): New structure to describe the DREX byte. 853 854 * config/tc-i386.c (process_drex): New function to handle SSE5 855 DREX bits. 856 (build_modrm_byte): Use the information cached away in 857 process_drex in the case of DREX instructions. 858 (i386_insn): Add drex field. 859 (pi): Add debugging of drex field. 860 (md_assemble): Treat SSE5 like SSE3 in instructions with an 861 immediate byte. Move REX field to DREX if this is a DREX 862 instruction. 863 (process_operands): Add SSE5 support. 864 (build_modrm_byte): Ditto. 865 (output_insn): Ditto. 866 (cpu_arch): Ditto. 867 (i386_align_code): Ditto. 868 8692007-09-12 Jan Beulich <jbeulich@novell.com> 870 871 * config/tc-i386.c (md_assemble): Move handling of extrq/insertq 872 after generic operand swapping, and swap only the immediate operands. 873 8742007-09-11 Nathan Sidwell <nathan@codesourcery.com> 875 876 * config/tc-m68k.c (m68k_ip): Add mcfisa_c case. 877 (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV. 878 8792007-09-09 H.J. Lu <hongjiu.lu@intel.com> 880 881 * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3 882 byte opcode. 883 8842007-09-08 H.J. Lu <hongjiu.lu@intel.com> 885 886 * config/tc-i386.c (cpu_flags_check_x64): Renamed to ... 887 (cpu_flags_check_cpu64): This. Inline. 888 (uints_all_zero): New. 889 (uints_set): Likewise 890 (uints_equal): Likewise 891 (UINTS_ALL_ZERO): Likewise 892 (UINTS_SET): Likewise 893 (UINTS_CLEAR): Likewise 894 (UINTS_EQUAL): Likewise 895 (cpu_flags_and): Likewise. 896 (cpu_flags_or): Likewise. 897 (operand_type_and): Likewise. 898 (operand_type_or): Likewise. 899 (operand_type_xor): Likewise. 900 (cpu_flags_not): Inline and use switch instead of loop. 901 (cpu_flags_match): Updated. 902 (operand_type_match): Likewise. 903 (smallest_imm_type): Likewise. 904 (set_cpu_arch): Likewise. 905 (pt): Likewise. 906 (md_assemble): Likewise. 907 (parse_insn): Likewise. 908 (optimize_imm): Likewise. 909 (match_template): Likewise. 910 (process_suffix): Likewise. 911 (update_imm): Likewise. 912 (finalize_imm): Likewise. 913 (process_operands): Likewise. 914 (build_modrm_byte): Likewise. 915 (i386_immediate): Likewise. 916 (i386_displacement): Likewise. 917 (i386_index_check): Likewise. 918 (i386_operand): Likewise. 919 (i386_target_format): Likewise. 920 (intel_e11): Likewise. 921 (operand_type): Remove implicitregister. 922 (operand_type_check): Updated. Inline. 923 (cpu_flags_all_zero): Removed. 924 (operand_type_all_zero): Likewise. 925 (i386_array_biop): Likewise. 926 (cpu_flags_biop): Likewise. 927 (operand_type_biop): Likewise. 928 9292007-09-08 H.J. Lu <hongjiu.lu@intel.com> 930 931 * Makefile.am: Run "make dep-am". 932 * Makefile.in: Regenerate. 933 9342007-09-08 H.J. Lu <hongjiu.lu@intel.com> 935 936 * configure.in (AC_CHECK_HEADERS): Add limits.h. 937 * configure: Regenerated. 938 * config.in: Likewise. 939 940 * config/tc-i386.c: Include "opcodes/i386-init.h". 941 (_i386_insn): Use i386_operand_type for types. 942 (cpu_arch_flags): Updated to new types with bitfield. 943 (cpu_arch_tune_flags): Likewise. 944 (cpu_arch_isa_flags): Likewise. 945 (cpu_arch): Likewise. 946 (i386_align_code): Likewise. 947 (set_code_flag): Likewise. 948 (set_16bit_gcc_code_flag): Likewise. 949 (set_cpu_arch): Likewise. 950 (md_assemble): Likewise. 951 (parse_insn): Likewise. 952 (process_operands): Likewise. 953 (output_branch): Likewise. 954 (output_jump): Likewise. 955 (parse_real_register): Likewise. 956 (mode_from_disp_size): Likewise. 957 (smallest_imm_type): Likewise. 958 (pi): Likewise. 959 (type_names): Likewise. 960 (pt): Likewise. 961 (pte): Likewise. 962 (swap_2_operands): Likewise. 963 (optimize_imm): Likewise. 964 (optimize_disp): Likewise. 965 (match_template): Likewise. 966 (check_string): Likewise. 967 (process_suffix): Likewise. 968 (check_byte_reg): Likewise. 969 (check_long_reg): Likewise. 970 (check_qword_reg): Likewise. 971 (check_word_reg): Likewise. 972 (finalize_imm): Likewise. 973 (build_modrm_byte): Likewise. 974 (output_insn): Likewise. 975 (disp_size): Likewise. 976 (imm_size): Likewise. 977 (output_disp): Likewise. 978 (output_imm): Likewise. 979 (gotrel): Likewise. 980 (i386_immediate): Likewise. 981 (i386_displacement): Likewise. 982 (i386_index_check): Likewise. 983 (i386_operand): Likewise. 984 (parse_real_register): Likewise. 985 (i386_intel_operand): Likewise. 986 (intel_e09): Likewise. 987 (intel_bracket_expr): Likewise. 988 (intel_e11): Likewise. 989 (cpu_arch_flags_not): New. 990 (cpu_flags_check_x64): Likewise. 991 (cpu_flags_all_zero): Likewise. 992 (cpu_flags_not): Likewise. 993 (i386_cpu_flags_biop): Likewise. 994 (cpu_flags_biop): Likewise. 995 (cpu_flags_match); Likewise. 996 (acc32): New. 997 (acc64): Likewise. 998 (control): Likewise. 999 (reg16_inoutportreg): Likewise. 1000 (disp16): Likewise. 1001 (disp32): Likewise. 1002 (disp32s): Likewise. 1003 (disp16_32): Likewise. 1004 (anydisp): Likewise. 1005 (baseindex): Likewise. 1006 (regxmm): Likewise. 1007 (imm8): Likewise. 1008 (imm8s): Likewise. 1009 (imm16): Likewise. 1010 (imm32): Likewise. 1011 (imm32s): Likewise. 1012 (imm64): Likewise. 1013 (imm16_32): Likewise. 1014 (imm16_32s): Likewise. 1015 (imm16_32_32s): Likewise. 1016 (operand_type): Likewise. 1017 (operand_type_check): Likewise. 1018 (operand_type_match): Likewise. 1019 (operand_type_register_match): Likewise. 1020 (update_imm): Likewise. 1021 (set_code_flag): Also update cpu_arch_flags_not. 1022 (set_16bit_gcc_code_flag): Likewise. 1023 (md_begin): Likewise. 1024 (parse_insn): Use cpu_flags_check_x64 to check 64bit support. 1025 Use cpu_flags_match to match instructions. 1026 (i386_target_format): Update cpu_arch_isa_flags and 1027 cpu_arch_tune_flags to i386_cpu_flags type with bitfield. 1028 (smallest_imm_type): Check cpu_arch_tune to tune for i486. 1029 (match_template): Don't initialize overlap0, overlap1, 1030 overlap2, overlap3 and operand_types. 1031 (process_suffix): Handle crc32 with 64bit register. 1032 (MATCH): Removed. 1033 (CONSISTENT_REGISTER_MATCH): Likewise. 1034 1035 * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags 1036 type. 1037 10382007-09-06 H.J. Lu <hongjiu.lu@intel.com> 1039 1040 * config/tc-i386.c (match_template): Handle invlpga, vmload, 1041 vmrun and vmsave in SVME. 1042 (process_suffix): Likewise. 1043 10442007-09-05 H.J. Lu <hongjiu.lu@intel.com> 1045 1046 * config/tc-i386.c (i386_index_check): Don't use RegRex 1047 on the reg_type field. 1048 (parse_real_register): Use `||' instead of `|'. 1049 10502007-09-04 H.J. Lu <hongjiu.lu@intel.com> 1051 1052 * config/tc-i386.c (process_operands): Remove segment override 1053 check on SVME instructions. 1054 (i386_index_check): Remove memory operand check on SVME 1055 instructions. 1056 10572007-09-04 Alan Modra <amodra@bigpond.net.au> 1058 1059 * config/tc-spu.c (struct spu_insn): Delete "flag". Add "reloc". 1060 (md_assemble): Update init of insn. Use insn.reloc instead of 1061 calculating from flag. 1062 (get_imm): Set reloc rather than flag. 1063 (calcop): Formatting. 1064 10652007-08-29 Daniel Jacobowitz <dan@codesourcery.com> 1066 1067 * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives. 1068 10692007-08-28 Daniel Jacobowitz <dan@codesourcery.com> 1070 1071 * doc/c-arc.texi: Fix typo. 1072 10732007-08-28 H.J. Lu <hongjiu.lu@intel.com> 1074 1075 * config/tc-i386.c (process_suffix): Handle cmpxchg8b in 1076 Intel mode. 1077 10782007-08-28 Nathan Sidwell <nathan@codesourcery.com> 1079 1080 * config/tc-m68k.c (mcf52235_ctrl): Add cache registers. 1081 (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2. 1082 (mcf5407_ctrl): New. 1083 (m68k_cpus): Adjust 5407 entry. 1084 10852007-08-28 Maxim Kuvyrkov <maxim@codesourcery.com> 1086 1087 * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers. 1088 (m68k_cpus): Define 51QE cpu. 1089 10902007-08-28 Mark Shinwell <shinwell@codesourcery.com> 1091 Joseph Myers <joseph@codesourcery.com> 1092 1093 * as.c (main): Flush stderr before printing listings to ensure 1094 consistent output order across platforms. 1095 10962007-08-28 Robert Sebastian Gerus <arachnist@gmail.com> 1097 1098 * configure.tgt: Add support for i[3-7]86-*-dragonfly*. 1099 11002007-08-24 Joseph Myers <joseph@codesourcery.com> 1101 Paul Brook <paul@codesourcery.com> 1102 1103 * remap.c: New. 1104 * as.h (remap_debug_filename, add_debug_prefix_map): Declare. 1105 * as.c (show_usage): Document --debug-prefix-map option. 1106 (parse_args): Handle --debug-prefix-map. 1107 * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths. 1108 * stabs.c (stabs_generate_asm_file): Remap debug paths. 1109 * Makefile.am (GAS_CFILES): Add remap.c 1110 (GENERIC_OBJS): Add remap.o. 1111 Regenerate dependencies. 1112 * Makefile.in: Regenerate. 1113 * doc/as.texinfo (--debug-prefix-map): Document. 1114 11152007-08-24 Aurelien Jarno <aurel32@debian.org> 1116 1117 * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long 1118 before printing them. 1119 11202007-08-24 Anders Waldenborg <anders@0x63.nu> 1121 Alan Modra <amodra@bigpond.net.au> 1122 1123 * config/tc-i386.c (lex_got): Don't scan past a comma. 1124 11252007-08-23 Ben Elliston <bje@au.ibm.com> 1126 1127 * config/tc-ppc.c (parse_cpu): Handle "750cl". 1128 (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7". 1129 (md_show_usage): Document -m750cl. 1130 (md_assemble): Handle two delimiters in succession (eg. `),'). 1131 * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl. 1132 11332007-08-23 Ben Elliston <bje@au.ibm.com> 1134 1135 * doc/c-arm.texi (ARM Directives): Move brackets out of @vars. 1136 11372007-08-17 Alan Modra <amodra@bigpond.net.au> 1138 1139 PR gas/4079 1140 * config/tc-i386.c (x86_cons): Complain about invalid @got etc. 1141 expressions. 1142 (i386_immediate): Detect and complain about more cases of 1143 invalid immediate expressions. Return failure rather than 1144 converting them to zero. 1145 (i386_displacement): Likewise. 1146 11472007-08-17 Alan Modra <amodra@bigpond.net.au> 1148 1149 * po/Make-in: Add --msgid-bugs-address to xgettext invocation. 1150 11512007-08-14 Andreas Schwab <schwab@suse.de> 1152 1153 * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is 1154 unrepresentable. 1155 11562007-08-12 Matthias Klose <doko@ubuntu.com> 1157 1158 * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include 1159 $(top_srcdir)/../../bfd/doc. 1160 * doc/Makefile.in: Regenerate. 1161 11622007-08-10 Nick Clifton <nickc@redhat.com> 1163 1164 * NEWS: Add a marker for the 2.18 features. 1165 11662007-08-09 Paul Brook <paul@codesourcery.com> 1167 1168 * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment. 1169 11702007-08-09 H.J. Lu <hongjiu.lu@intel.com> 1171 1172 * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb. 1173 11742007-07-29 H.J. Lu <hongjiu.lu@intel.com> 1175 1176 * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert 1177 DWORD memory to Reg64 in Intel synax. 1178 (check_qword_reg): Allow cvtsd2si to convert QWORD memory to 1179 Reg32 in Intel syntax. 1180 11812007-07-25 Sterling Augustine <sterling@tensilica.com> 1182 1183 * config/tc-xtensa.c (xtensa_extui_opcode): New. 1184 (xg_expand_assembly_insn): Check for invalid extui operands. 1185 (md_begin): Initialize xtensa_extui_opcode. 1186 11872007-07-24 Nick Clifton <nickc@redhat.com> 1188 1189 * config/tc-mep.h (skip_whitespace): Remove definition. 1190 11912007-07-23 H.J. Lu <hongjiu.lu@intel.com> 1192 1193 * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386. 1194 (f32_15): Removed. 1195 (jump_31): New. 1196 (f32_patt): Remove f32_15. 1197 (f16_patt): Likewise. 1198 (i386_align_code): Updated to alt_long_patt for 64bit by 1199 default. 1200 1201 * config/tc-i386.h (processor_type): Add PROCESSOR_I386. 1202 12032007-07-23 Evandro Menezes <evandro.menezes@amd.com> 1204 1205 * config/tc-i386.c (i386_align_code): Enable alignment up to 1206 MAX_MEM_FOR_RS_ALIGN_CODE bytes. Remove special treatment 1207 for K8. 1208 1209 * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31. 1210 12112007-07-20 Nick Clifton <nickc@redhat.com> 1212 1213 * app.c (do_scrub_chars): Provide a one character buffer to hold a 1214 pushed back newline at the end of an unterminated quoted string. 1215 12162007-07-14 Nick Clifton <nickc@redhat.com> 1217 1218 * config/tc-arm.c (create_register_alias): Return a boolean rather 1219 than an integer. 1220 Check the return value of insert_reg_alias and do not continue to 1221 create aliases once an insertion has failed. 1222 (s_unreq): Delete the all-upper-case and all-lower-case 1223 alternatives as well. 1224 12252007-07-12 Kai Tietz <kai.tietz@onevision.com> 1226 1227 * symbols.c: Print bfd_hostptr_t to file via fprintf_vma. 1228 * write.c: Likewise. 1229 12302007-07-11 Daniel Jacobowitz <dan@codesourcery.com> 1231 1232 * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use 1233 HAVE_64BIT_SYMBOLS. 1234 12352007-07-04 Richard Sandiford <richard@codesourcery.com> 1236 1237 * config/tc-mips.c (mips_cpu_info_table): Add new entries for 1238 {24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2. 1239 Deprecate *x and *fx. 1240 * doc/c-mips.texi: Document the new CPU arguments. Deprecate 1241 *x and *fx. 1242 12432007-07-04 H.J. Lu <hongjiu.lu@intel.com> 1244 1245 * config/obj-coff.h (x86_64_target_format): Renamed to ... 1246 (i386_target_format): This 1247 (TARGET_FORMAT): Use i386_target_format. 1248 1249 * config/tc-i386.c (x86_64_target_format): Removed. 1250 (i386_target_format): Handle PE formats. 1251 12522007-07-04 Nick Clifton <nickc@redhat.com> 1253 1254 * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order 1255 to get the right length of printed value. 1256 12572007-07-03 Nick Clifton <nickc@redhat.com> 1258 1259 * COPYING: Replace with GPLv3 text. 1260 * app.c: Update copyright notice to refer to GPLv3. 1261 * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h, 1262 cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h, 1263 dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h, 1264 emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h, 1265 flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c, 1266 input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c, 1267 itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c, 1268 macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c, 1269 read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h, 1270 symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h, 1271 config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h, 1272 config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y, 1273 config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y, 1274 config/obj-aout.c, config/obj-aout.h, config/obj-coff.c, 1275 config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h, 1276 config/obj-elf.c, config/obj-elf.h, config/obj-evax.c, 1277 config/obj-evax.h, config/obj-multi.h, config/obj-som.c, 1278 config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h, 1279 config/tc-arc.c, config/tc-arc.h, config/tc-arm.c, 1280 config/tc-arm.h, config/tc-avr.c, config/tc-avr.h, 1281 config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c, 1282 config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h, 1283 config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c, 1284 config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h, 1285 config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c, 1286 config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h, 1287 config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c, 1288 config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h, 1289 config/tc-i370.c, config/tc-i370.h, config/tc-i386.c, 1290 config/tc-i386.h, config/tc-i860.c, config/tc-i860.h, 1291 config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c, 1292 config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h, 1293 config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c, 1294 config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h, 1295 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c, 1296 config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h, 1297 config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c, 1298 config/tc-mep.h, config/tc-mips.c, config/tc-mips.h, 1299 config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c, 1300 config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h, 1301 config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c, 1302 config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h, 1303 config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c, 1304 config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h, 1305 config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h, 1306 config/tc-s390.c, config/tc-s390.h, config/tc-score.c, 1307 config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h, 1308 config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c, 1309 config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h, 1310 config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c, 1311 config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h, 1312 config/tc-v850.c, config/tc-v850.h, config/tc-vax.c, 1313 config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h, 1314 config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c, 1315 config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h, 1316 config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h, 1317 config/te-freebsd.h, config/te-hppa.h, config/te-irix.h, 1318 config/te-netware.h, config/te-sparcaout.h, config/te-tmips.h, 1319 config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h, 1320 config/xtensa-relax.c, config/xtensa-relax.h: Likewise. 1321 1322 * flonum-mult.c: Likewise, and also correct typo referring to 1323 non-existant GNU Assembler General Public License. 1324 * config/tc-m68851.h: Likewise. 1325 * NEWS: Mention the new license. Also note where the 2.17 release 1326 happened. 1327 * config/e-crisaout.c: Add copyright header. 1328 * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c, 1329 config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c, 1330 config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h, 1331 config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h, 1332 config/te-generic.h, config/te-gnu.h, config/te-go32.h, 1333 config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h, 1334 config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h, 1335 config/te-linux.h, config/te-lnews.h, config/te-lynx.h, 1336 config/te-mach.h, config/te-macos.h, config/te-nbsd532.h, 1337 config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h, 1338 config/te-pep.h, config/te-psos.h, config/te-riscix.h, 1339 config/te-sun3.h, config/te-svr4.h, config/te-symbian.h, 1340 config/te-wince-pe.h: Likewise. 1341 13422007-07-03 Nathan Sidwell <nathan@codesourcery.com> 1343 1344 * config/tc-m68k.c (m68k_ip): Add j & K operand types. 1345 (install_operand): Add E encoding. 1346 (md_begin): Check and skip initial '.' arg character. 1347 (get_num): Add 0..511 case. 1348 13492007-07-03 Alan Modra <amodra@bigpond.net.au> 1350 1351 PR 4713 1352 * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF. 1353 * config/obj-elf.h (obj_ecoff_set_ext): Comment. 1354 13552007-07-03 Mikkel Lauritsen <renard@nospam.dk> 1356 1357 PR 4722 1358 * app.c (do_scrub_chars <state 5>): Check for output buffer full 1359 after memcpy. 1360 13612007-07-02 Joseph Myers <joseph@codesourcery.com> 1362 1363 * config/tc-mips.c (s_dtprelword, s_dtpreldword, 1364 s_dtprel_internal): New. 1365 (mips_pseudo_table): Add .dtprelword and .dtpreldword. 1366 (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and 1367 BFD_RELOC_MIPS_TLS_DTPREL64. 1368 13692007-07-02 Alan Modra <amodra@bigpond.net.au> 1370 1371 * Makefile.am: Run "make dep-am". 1372 * Makefile.in: Regenerate. 1373 * aclocal.m4: Regenerate. 1374 * config.in: Regenerate. 1375 * doc/Makefile.in: Regenerate. 1376 * po/POTFILES.in: Regenerate. 1377 * po/gas.pot: Regenerate. 1378 13792007-07-02 Alan Modra <amodra@bigpond.net.au> 1380 1381 * config/tc-ppc.c (ppc_pe_section): Comment out code assigning 1382 coff section flag values to bfd section flag. 1383 13842007-06-30 H.J. Lu <hongjiu.lu@intel.com> 1385 1386 * aclocal.m4: Regenerated. 1387 * doc/Makefile.in: Likewise. 1388 * Makefile.in: Likewise. 1389 13902007-06-29 Joseph Myers <joseph@codesourcery.com> 1391 1392 * as.c (main): Only call create_obj_attrs_section if IS_ELF. 1393 13942007-06-29 Joseph Myers <joseph@codesourcery.com> 1395 1396 * as.c (create_obj_attrs_section): New. 1397 (main): Call create_obj_attrs_section for ELF. 1398 * read.c (s_gnu_attribute, skip_whitespace, skip_past_char, 1399 skip_past_comma, s_vendor_attribute): New. 1400 (potable): Add gnu_attribute for ELF. 1401 * read.h (s_vendor_attribute): Declare. 1402 * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper 1403 round s_vendor_attribute. 1404 (aeabi_set_public_attributes): Update for new attributes 1405 interfaces. 1406 (arm_md_end): Remove attributes contents setting now done 1407 generically. 1408 14092007-06-29 M R Swami Reddy <MR.Swami.Redd@nsc.com> 1410 1411 * Makefile.am: Add CR16 related entry. 1412 * Makefile.in: Regenerate. 1413 * config/tc-cr16.h: New file 1414 * config/tc-cr16.c: New file 1415 * doc/c-cr16.texi: New file for cr16 1416 * doc/all.texi: Entry for cr16 1417 * doc/Makefile.am: Added c-cr16.texi 1418 * doc/Makefile.in: Regenerate 1419 * doc/as.texinfo: Entry for CR16 target 1420 * NEWS: Announce the support for the new target. 1421 14222007-06-26 Paul Brook <paul@codesourcery.com> 1423 1424 * config/tc-arm.c (parse_operands): Accept generic coprocessor regs 1425 for OP_RVC. 1426 (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1. 1427 14282007-06-25 H.J. Lu <hongjiu.lu@intel.com> 1429 1430 * config/tc-i386.c (process_operands): Replace regKludge 1431 with RegKludge. 1432 14332007-06-25 Richard Sandiford <richard@codesourcery.com> 1434 1435 * config/tc-mips.h (TC_SYMFIELD_TYPE): New. 1436 * config/tc-mips.c (append_insn): Record which symbols have 1437 R_MIPS16_26 relocations against them. 1438 (mips_fix_adjustable): Don't reduce relocations against such symbols. 1439 14402007-06-22 Sterling Augustine <sterling@tensilica.com> 1441 1442 * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules. 1443 (frag_format_size): Handle RELAX_IMMED_STEP3. 1444 (xtensa_relax_frag, md_convert_frag): Likewise. 1445 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3. 1446 (RELAX_IMMED_MAXSTEPS): Adjust. 1447 * config/xtensa-relax.c (widen_spec_list): Add transitions from 1448 wide branches to branch-over-jumps. 1449 (build_transition): Handle wide branches in transition patterns. 1450 14512007-06-22 H.J. Lu <hongjiu.lu@intel.com> 1452 1453 * config/tc-i386.c (disp_size): New. 1454 (imm_size): Likewise. 1455 (output_disp): Use disp_size and imm_size. 1456 (output_imm): Use imm_size. 1457 14582007-06-19 Sterling Augustine <sterling@tensilica.com> 1459 1460 * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about 1461 use of literal_frag field. 1462 * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag 1463 in the literal_frag field. 1464 (xtensa_move_literals): Use it here instead of searching. Update 1465 literal_frag field with new value. 1466 14672007-06-14 Paul Brook <paul@codesourcery.com> 1468 1469 * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and 1470 narrow shift by immediate. 1471 14722007-06-14 H.J. Lu <hongjiu.lu@intel.com> 1473 1474 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd. 1475 1476 * acinclude.m4: Don't include m4 files. 1477 (BFD_BINARY_FOPEN): Removed. 1478 Remove libtool kludge. 1479 1480 * Makefile.in: Regenerated. 1481 * doc/Makefile.in: Likewise. 1482 * aclocal.m4: Likewise. 1483 * configure: Likewise. 1484 14852007-06-11 Sterling Augustine <sterling@tensilica.com> 1486 Bob Wilson <bob.wilson@acm.org> 1487 1488 * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to... 1489 (XTENSA_PROP_NO_TRANSFORM): ...this. 1490 (frag_flags_struct): Move is_no_transform out of the insn sub-struct. 1491 (xtensa_mark_frags_for_org): New. 1492 (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org. 1493 (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org. 1494 (get_frag_property_flags): Adjust reference to is_no_transform flag. 1495 (xtensa_frag_flags_combinable): Likewise. 1496 (frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM. 1497 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG. 1498 14992007-06-06 Paul Brook <paul@codesourcery.com> 1500 1501 * config/tc-arm.c (s_align): Pad code sections appropriately. 1502 15032007-06-05 Paul Brook <paul@codesourcery.com> 1504 1505 * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes. 1506 15072007-06-05 Nick Clifton <nickc@redhat.com> 1508 1509 PR gas/4587 1510 * config/tc-sparc.c (sparc_ip): Terminate tls_ops array. 1511 15122007-06-05 Alan Modra <amodra@bigpond.net.au> 1513 1514 * config/tc-spu.c (spu_cons): Use deferred_expression. Handle 1515 number@ppu. 1516 (tc_gen_reloc): Abort if neither addsy or subsy is set. 1517 (md_apply_fix): Don't attempt to resolve SPU_PPU relocs. 1518 * config/tc-spu.h (md_operand): Handle @ppu without sym. 1519 15202007-05-31 Paul Brook <paul@codesourcery.com> 1521 1522 * config/tc-arm.c (insns): Allow strex on M profile cores. 1523 15242007-05-29 David S. Miller <davem@davemloft.net> 1525 Jakub Jelinek <jakub@redhat.com> 1526 1527 PR gas/4558 1528 * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks 1529 for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19. 1530 15312007-05-29 Alan Modra <amodra@bigpond.net.au> 1532 1533 * config/tc-spu.h: Wrap in #ifndef/#endif. Delete coff macros. 1534 15352007-05-29 Alan Modra <amodra@bigpond.net.au> 1536 1537 * config/tc-ppc.c: Convert to ISO C. 1538 * config/tc-ppc.c: Likewise. 1539 15402007-05-29 Alan Modra <amodra@bigpond.net.au> 1541 1542 * write.h (EXEC_MACHINE_TYPE): Delete. 1543 (string_byte_count, section_alignment): Delete. 1544 15452007-05-28 Nathan Sidwell <nathan@codesourcery.com> 1546 1547 * app.c (do_scrub_chars): Cope with \ at end of buffer. 1548 15492007-05-26 Alan Modra <amodra@bigpond.net.au> 1550 1551 * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in 1552 top 32 bits of 64 bit value if so doing results in passing 1553 range check. Rewrite sign extension fudges similarly. Enable 1554 fudges for powerpc64 too. Report user value if range check 1555 fails rather than fudged value. Negate PPC_OPERAND_NEGATIVE 1556 range rather than value, also to report user value on failure. 1557 15582007-03-25 Paul Brook <paul@codesourcery.com> 1559 1560 * config/tc-arm.c (T2_SUBS_PC_LR): Define. 1561 (do_t_add_sub): Correctly encode subs pc, lr, #const. 1562 (do_t_mov_cmp): Correctly encode movs pc, lr. 1563 15642007-05-24 Steve Ellcey <sje@cup.hp.com> 1565 1566 * Makefile.in: Regnerate. 1567 * configure: Regenerate. 1568 * aclocal.m4: Regenerate. 1569 * doc/Makefile.in: Regenerate. 1570 15712007-05-22 Bob Wilson <bob.wilson@acm.org> 1572 1573 * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements 1574 and index entries about automatic alignment of ENTRY instructions. 1575 15762007-05-22 Nick Clifton <nickc@redhat.com> 1577 1578 * doc/as.texinfo: Use @copying around the copyright notice. 1579 15802007-05-18 Joseph Myers <joseph@codesourcery.com> 1581 1582 * config/tc-mips.c (s_mipsset): Use generic s_set for directives 1583 containing a comma. 1584 15852007-05-17 H.J. Lu <hongjiu.lu@intel.com> 1586 1587 PR gas/4517 1588 2003-06-05 Michal Ludvig <mludvig@suse.cz> 1589 * doc/as.texinfo: Document new directives: .cfi_restore, 1590 .cfi_undefined, .cfi_same_value, .cfi_return_column, 1591 .cfi_remember_state and .cfi_restore_state. 1592 15932007-05-17 Nathan Sidwell <nathan@codesourcery.com> 1594 1595 * config/tc-m68k.c (md_apply_fix): Show value of out of range 1596 fixups in error message. 1597 (md_conver_frag_1): Propagate the fix source location and use 1598 as_bad_where rather than fatal, for better error messages. 1599 16002007-05-16 Paul Brook <paul@codesourcery.com> 1601 1602 * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr. 1603 16042007-05-15 Mark Shinwell <shinwell@codesourcery.com> 1605 1606 * app.c (do_scrub_chars): Don't damage \@ pseudo-variables. 1607 16082007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr> 1609 1610 PR gas/3041 1611 * config/tc-m68k.c (relaxable_symbol): Make sure that the correct 1612 addend is stored for relocs against weak symbols. 1613 (md_apply_fix): So not loose track of addend for relocs against 1614 weak symbols. 1615 16162007-05-14 Thiemo Seufer <ths@mips.com> 1617 1618 * config/tc-mips.c (md_parse_option): Fix parsing of -O option. 1619 16202007-05-14 Mei Ligang <ligang@sunnorth.com.cn> 1621 1622 * config/tc-score.c (data_op2, validate_immediate): Fix bug for 1623 addri, addri.c, subi, and subi.c when immediate number is hex. 1624 (score_insns): Remove subis and subis.c. 1625 (do_sub_rdi16): Delete. 1626 16272007-05-11 Alan Modra <amodra@bigpond.net.au> 1628 1629 * config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call 1630 spu_cons for word. 1631 (md_assemble): Tidy use of insn.flag. 1632 (get_imm): Likewise. Handle uppercase input too. 1633 (spu_cons): New function. 1634 * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs. 1635 (TC_FORCE_RELOCATION): Don't resolve them either. 1636 16372007-05-05 Mark Shinwell <shinwell@codesourcery.com> 1638 1639 * config/tc-arm.c (md_apply_fix): Generate more accurate 1640 diagnostic when 8-bit immediate range is exceeded for 1641 BFD_RELOC_ARM_OFFSET_IMM8. 1642 16432007-05-04 Alan Modra <amodra@bigpond.net.au> 1644 1645 PR gas/4460 1646 * config/tc-i386.c (lex_got): Don't replace the reloc token with 1647 a space if we already have a space. 1648 16492007-05-03 H.J. Lu <hongjiu.lu@intel.com> 1650 1651 * config/tc-i386.c (match_template): Don't explicitly check 1652 suffix for crc32 in Intel mode. 1653 (process_suffix): Issue an error for crc32 if the operand size 1654 is ambiguous. 1655 16562007-05-03 Vincent Riviere <vincent.riviere@freesbee.fr> 1657 Nick Clifton <nickc@redhat.com> 1658 1659 PR gas/3041 1660 * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols. 1661 (tc_gen_reloc): Adjust the addend of relocs against weak symbols. 1662 (md_apply_fix): Put zero values into the frags referencing weak 1663 symbols. 1664 16652007-05-02 Alan Modra <amodra@bigpond.net.au> 1666 1667 PR 4448 1668 * config/tc-ppc.c (ppc_insert_operand): Don't increase min for 1669 PPC_OPERAND_PLUS1. 1670 16712007-05-01 H.J. Lu <hongjiu.lu@intel.com> 1672 1673 * config/tc-i386.c (match_template): Check suffix for crc32 in 1674 Intel mdoe. 1675 (process_suffix): Default the suffix of 8bit crc32 to 1676 BYTE_MNEM_SUFFIX. 1677 (check_byte_reg): Skip check for 8bit crc32. 1678 16792007-04-30 H.J. Lu <hongjiu.lu@intel.com> 1680 1681 * config/tc-i386.c (md_assemble): Use register_prefix in 1682 error/warning message. 1683 (check_byte_reg): Likewise. 1684 (check_long_reg): Likewise. 1685 (check_qword_reg): Likewise. 1686 (check_word_reg): Likewise. 1687 (process_operands): Likewise. 1688 16892007-04-30 Alan Modra <amodra@bigpond.net.au> 1690 1691 PR 4436 1692 * config/tc-ppc.c (ppc_insert_operand): Disable range check if 1693 min > max. 1694 16952007-04-28 Thiemo Seufer <ths@networkno.de> 1696 1697 * config/tc-mips.c: Fix comment. 1698 16992007-04-26 Anatoly Sokolov <aesok@post.ru> 1700 1701 * config/tc-avr.c (mcu_types): Add support for atmega8hva and 1702 atmega16hva devices. Move at90usb82 device to 'avr5' architecture. 1703 * doc/c-avr.texi: Document new devices. 1704 17052007-04-24 Alan Modra <amodra@bigpond.net.au> 1706 1707 * Makefile.am: Run "make dep-am". 1708 * Makefile.in: Regenerate. 1709 17102007-04-23 Nathan Sidwell <nathan@codesourcery.com> 1711 1712 * config/tc-m68k.c (mcf54455_ctrl): New. 1713 (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New. 1714 (m68k_archs): Add isac. 1715 (m68k_cpus): Add 54455 family. 1716 (m68k_ip): Split Bg into Bb, Bs, Bg. 1717 (m68k_elf_final_processing): Add ISA_C. 1718 * doc/c-m68k.texi (M680x0 Options): Add isac. 1719 17202007-04-22 Alan Modra <amodra@bigpond.net.au> 1721 1722 * read.c (read_a_source_file): Skip multiple spaces to 1723 cover hack in mmix md_start_line_hook which overwrites a 1724 colon with a space. Delete sermon and needless assertion. 1725 17262007-04-21 Alan Modra <amodra@bigpond.net.au> 1727 1728 * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned. 1729 (md_atof): Make number_of_chars unsigned. Revert last change. 1730 * config/tc-or32.c (md_apply_fix): Delete bogus assertions. 1731 * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF. 1732 * config/tc-sh.h (md_optimize_expr): Likewise. 1733 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus 1734 assertion. 1735 * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise. 1736 17372007-04-21 Nick Clifton <nickc@redhat.com> 1738 1739 * config/atof-vax.c (md_atof): Fix comparison inside know(). 1740 1741 * config/tc-ia64.c (emit_one_bundle): Fix typo. 1742 17432007-04-21 Alan Modra <amodra@bigpond.net.au> 1744 1745 * expr.c (expr): Assert on rankarg, not rank which can be unsigned. 1746 * read.c (read_a_source_file): Remove buffer_limit[-1] assertion. 1747 Don't skip over NUL char. 1748 (pseudo_set): Set X_op for registers to O_register. 1749 * symbols.c (symbol_clone): Remove assertion that sym is defined. 1750 (resolve_symbol_value): Resolve O_register symbols. 1751 * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab. 1752 Instead find st(0) by hash lookup. 1753 * config/tc-ppc.c (ppc_macro): Warning fix. 1754 1755 * as.h (ENABLE_CHECKING): Default define to 0. 1756 (know): Assert if ENABLE_CHECKING. 1757 (struct relax_type): Remove superfluous declaration. 1758 * configure.in (--enable-checking): New. 1759 * configure: Regenerate. 1760 * config.in: Regenerate. 1761 * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING. 1762 Check for duplicate powerpc_operands entries. 1763 17642007-04-20 Nathan Sidwell <nathan@codesourcery.com> 1765 1766 * config/tc-m68k.c (mcf5253_ctrl): New. 1767 (mcf52223_ctrl): New. 1768 (m68k_cpus): Add 5253, 52221, 52223. 1769 1770 * config/m68k-parse.h (RAMBAR_ALT): New. 1771 * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New. 1772 (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl, 1773 mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl, 1774 mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl, 1775 mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for 1776 RAMBAR1. 1777 (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT. 1778 (m68k_cpus): Adjust 5206, 5206e & 5307 entries. 1779 (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it 1780 to control register mapping. 1781 17822007-04-20 Alan Modra <amodra@bigpond.net.au> 1783 1784 * messages.c (as_internal_value_out_of_range): Fix typo in 1785 error message. Return after printing domain error. 1786 * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits 1787 in max when shifting right. 1788 17892007-04-20 Alan Modra <amodra@bigpond.net.au> 1790 1791 * messages.c (as_internal_value_out_of_range): Extend to report 1792 errors for values with invalid low bits set. 1793 * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm 1794 fields. Check that operands and opcode fields are disjoint. 1795 (ppc_insert_operand): Check operands using mask rather than bit 1796 count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust 1797 insertion code. 1798 (md_apply_fix): Adjust for struct powerpc_operand change. 1799 18002007-04-19 Paul Brook <paul@codesourcery.com> 1801 1802 * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on 1803 Thumb-1. Add sanity check for bogus relaxations. 1804 18052007-04-19 Paul Brook <paul@codesourcery.com> 1806 1807 * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1. 1808 18092007-04-19 Alan Modra <amodra@bigpond.net.au> 1810 1811 * Makefile.am: Run "make dep-am". 1812 * Makefile.in: Regenerate. 1813 18142007-04-19 Nathan Froyd <froydnj@codesourcery.com> 1815 1816 * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe. 1817 18182007-04-18 H.J. Lu <hongjiu.lu@intel.com> 1819 1820 * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4. 1821 18222007-04-18 H.J. Lu <hongjiu.lu@intel.com> 1823 1824 * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4. 1825 (match_template): Handle operand size for crc32 in SSE4.2. 1826 (process_suffix): Handle operand type for crc32 in SSE4.2. 1827 (output_insn): Support SSE4.2. 1828 18292007-04-18 H.J. Lu <hongjiu.lu@intel.com> 1830 1831 * config/tc-i386.c (cpu_arch): Add .sse4.1. 1832 (process_operands): Adjust implicit operand for blendvpd, 1833 blendvps and pblendvb in SSE4.1. 1834 (output_insn): Support SSE4.1. 1835 18362007-04-18 Paul Brook <paul@codesourcery.com> 1837 1838 * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible. 1839 18402007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp> 1841 1842 * config/tc-sh.c (sh_handle_align): Call as_bad_where instead 1843 of as_warn_where for misaligned data. 1844 18452007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp> 1846 1847 * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle 1848 rs_fill frags. 1849 18502007-04-14 Steve Ellcey <sje@cup.hp.com> 1851 1852 * Makefile.am: Add ACLOCAL_AMFLAGS. 1853 * Makefile.in: Regenerate. 1854 18552007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp> 1856 1857 * config/tc-sh.c (align_test_frag_offset_fixed_p): New. 1858 (sh_optimize_expr): Likewise. 1859 * config/tc-sh.h (md_optimize_expr): Define. 1860 (sh_optimize_expr): Prototype. 1861 18622007-04-06 Matt Thomas <matt@netbsd.org> 1863 1864 * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp) 1865 to emit pcrel relocations by DWARF2 in non-code sections. Borrowed 1866 heavily from tc-sparc.c. (vax_cons_fix_new): Likewise. 1867 18682007-04-04 Kazu Hirata <kazu@codesourcery.com> 1869 1870 * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a. 1871 18722007-04-04 Paul Brook <paul@codesourcery.com> 1873 1874 * config/tc-arm.c (do_neon_ext): Enforce immediate range. 1875 (insns): Use I15 for vext. 1876 18772007-04-04 Paul Brook <paul@codesourcery.com> 1878 1879 * configure.tgt: Loosen checks for arm uclinux eabi targets. 1880 18812007-04-02 Sterling Augustine <sterling@tensilica.com> 1882 1883 * config/tc-xtensa.c (xtensa_flush_pending_output): Check 1884 outputting_stabs_line_debug. 1885 18862007-03-26 Anatoly Sokolov <aesok@post.ru> 1887 1888 * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82, 1889 at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p 1890 devices. 1891 * doc/c-avr.texi: Document new devices. 1892 18932007-04-02 Richard Sandiford <richard@codesourcery.com> 1894 1895 * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options. 1896 * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document. 1897 * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic. 1898 18992007-03-30 Sterling Augustine <sterling@tensilica.com> 1900 Bob Wilson <bob.wilson@acm.org> 1901 1902 * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument. 1903 Do not check is_loop_target flag. 1904 (xtensa_frob_label): Adjust calls to xtensa_move_labels. 1905 (xg_assemble_vliw_tokens): Likewise. Also avoid calling 1906 xtensa_move_labels for alignment of loop opcodes. 1907 19082007-03-30 H.J. Lu <hongjiu.lu@intel.com> 1909 1910 * config/tc-i386.c (process_suffix): Reindent a bit. 1911 19122007-03-30 Paul Brook <paul@codesourcery.com> 1913 1914 * config/tc-arm.c (encode_thumb2_ldmstm): New function. 1915 (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm. 1916 (do_t_push_pop): Use encode_thumb2_ldmstm. 1917 19182007-03-29 DJ Delorie <dj@redhat.com> 1919 1920 * config/tc-m32c.c (rl_for, relaxable): Protect argument. 1921 (md_relax_table): Add entries for ADJNZ macros. 1922 (M32C_Macros): Add ADJNZ macros. 1923 (subtype_mappings): Add entries for ADJNZ macros. 1924 (insn_to_subtype): Check for adjnz and sbjnz insns. 1925 (md_estimate_size_before_relax): Pass insn to insn_to_subtype. 1926 (md_convert_frag): Convert adjnz and sbjnz. 1927 19282007-03-29 Nick Clifton <nickc@redhat.com> 1929 1930 * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long 1931 initialization. 1932 * itbl-ops.h (enum e_processor): Initialise the e_nprocs field 1933 using ITBL_NUMBER_OF_PROCESSORS. 1934 * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS. 1935 19362007-03-28 H.J. Lu <hongjiu.lu@intel.com> 1937 1938 * config/tc-i386.c (build_modrm_byte): For instructions with 2 1939 register operands, encode destination in i.rm.regmem if its 1940 RegMem bit is set. 1941 19422007-03-28 Richard Sandiford <richard@codesourcery.com> 1943 Phil Edwards <phil@codesourcery.com> 1944 1945 * doc/as.texinfo: Put the contents after the title page rather 1946 than at the end of the document. 1947 19482007-03-27 Alan Modra <amodra@bigpond.net.au> 1949 1950 * NEWS: Mention ".reloc". 1951 19522007-03-26 Sterling Augustine <sterling@tensilica.com> 1953 1954 * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms 1955 in FLIX instructions. 1956 19572007-03-26 Julian Brown <julian@codesourcery.com> 1958 1959 * config/tc-arm.c (arm_it): Add immisfloat field. 1960 (parse_qfloat_immediate): Disallow integer syntax for floating-point 1961 immediates. Fix hex immediates, handle 0.0 and -0.0 specially. 1962 (parse_neon_mov): Set immisfloat bit for operand if it parsed as a 1963 float. 1964 (neon_cmode_for_move_imm): Reject non-float immediates for float 1965 operands. 1966 (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm. 1967 19682007-03-26 Julian Brown <julian@codesourcery.com> 1969 1970 * doc/c-arm.texi: Add documentation for .dn/.qn directives. 1971 19722007-03-26 Alan Modra <amodra@bigpond.net.au> 1973 1974 * doc/as.texinfo (Reloc): Document. 1975 * read.c (potable): Add "reloc". 1976 (s_reloc): New function. 1977 * write.c (reloc_list): New global var. 1978 (resolve_reloc_expr_symbols): New function. 1979 (write_object_file): Call it. 1980 (write_relocs): Process reloc_list. 1981 * write.h (struct reloc_list): New. 1982 (reloc_list): Declare. 1983 19842007-03-24 Paul Brook <paul@codesourcery.com> 1985 1986 * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes. 1987 19882007-03-24 Paul Brook <paul@codesourcery.com> 1989 Mark Shinwell <shinwell@codesourcery.com> 1990 1991 * config/tc-arm.c (operand_parse_code): Add OP_oRRw. 1992 (parse_operands): Don't expect comma if first operand missing. 1993 Handle OP_oRRw. 1994 (do_srs): Encode register number, checking it is r13. Update comment. 1995 (insns): Update SRS entries to take a register. 1996 19972007-03-23 H.J. Lu <hongjiu.lu@intel.com> 1998 1999 * config/tc-i386.c (md_begin): Allow '.' in mnemonic. 2000 20012007-03-23 Mark Shinwell <shinwell@codesourcery.com> 2002 2003 * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that 2004 attempt to jump to the next instruction into NOPs. 2005 20062007-03-23 Alan Modra <amodra@bigpond.net.au> 2007 2008 * config/tc-spu.c: Don't include opcode/spu.h. 2009 (md_assemble): Set tc_fix_data.insn_tag and arg_format. 2010 (md_apply_fix): Adjust. 2011 * config/tc-spu.h: Include opcode/spu.h. 2012 (struct tc_fix_info): New. 2013 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust. 2014 (TC_FORCE_RELOCATION): Define. 2015 20162007-03-22 Joseph Myers <joseph@codesourcery.com> 2017 2018 * doc/as.texinfo: Include VERSION_PACKAGE when reporting version. 2019 20202007-03-21 H.J. Lu <hongjiu.lu@intel.com> 2021 2022 * config/tc-i386.c (process_suffix): Check 0x90 instead of 2023 xchg for xchg %rax,%rax. 2024 20252007-03-21 H.J. Lu <hongjiu.lu@intel.com> 2026 2027 * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY 2028 and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively. 2029 20302007-03-21 H.J. Lu <hongjiu.lu@intel.com> 2031 2032 PR binutils/4218 2033 * config/tc-i386.c (match_template): Properly handle 64bit mode 2034 "xchg %eax, %eax". 2035 20362007-03-21 Anton Ertl <anton@mips.complang.tuw> 2037 2038 PR gas/4124 2039 * config/tc-alpha.c (emit_ustX): Fix ustq code generation. 2040 20412007-03-21 H.J. Lu <hongjiu.lu@intel.com> 2042 2043 * Makefile.am: Run dep-am. 2044 * Makefile.in: Regenerated. 2045 2046 * config/tc-i386.c: Don't include "opcodes/i386-opc.h". 2047 2048 * config/tc-i386.h: Include "opcodes/i386-opc.h". 2049 (NOP_OPCODE): Removed. 2050 (template): Likewise. 2051 20522007-03-21 Andreas Schwab <schwab@suse.de> 2053 2054 * config/tc-i386.h (NOP_OPCODE): Restore. 2055 20562007-03-18 Mark Shinwell <shinwell@codesourcery.com> 2057 2058 * config/tc-arm.c (do_mul): Don't warn about overlapping 2059 Rd and Rm operands when assembling for v6 or above. 2060 Correctly capitalize register names in the messages. 2061 (do_mlas): Likewise. Delete spurious blank line. 2062 20632007-03-16 Kazu Hirata <kazu@codesourcery.com> 2064 2065 * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa. 2066 20672007-03-15 H.J. Lu <hongjiu.lu@intel.com> 2068 2069 * config/tc-i386.c (md_begin): Use i386_regtab_size to scan 2070 i386_regtab. 2071 (parse_register): Use i386_regtab_size instead of ARRAY_SIZE 2072 on i386_regtab. 2073 20742007-03-15 Alexandre Oliva <aoliva@redhat.com> 2075 2076 PR gas/4184 2077 * app.c (do_scrub_chars): PUT after setting states. 2078 20792007-03-15 H.J. Lu <hongjiu.lu@intel.com> 2080 2081 * Makefile.am: Run "make dep-am". 2082 * Makefile.in: Regenerated. 2083 2084 * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of 2085 "opcode/i386.h". 2086 (md_begin): Check reg_name != NULL for the last entry in 2087 i386_regtab. 2088 2089 * config/tc-i386.h: Move many entries to opcode/i386.h and 2090 opcodes/i386-opc.h. 2091 2092 * configure.in (need_opcodes): Set true for i386. 2093 * configure: Regenerated. 2094 20952007-03-15 H.J. Lu <hongjiu.lu@intel.com> 2096 2097 * Makefile.am (REPORT_BUGS_TO): Removed. 2098 (INCLUDES): Remove -DREPORT_BUGS_TO. 2099 * Makefile.in: Regenerated. 2100 2101 * configure.in (--with-bugurl): Removed. 2102 * configure: Regenerated. 2103 2104 * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi. 2105 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc. 2106 (TEXI2DVI): Likewise. 2107 (gasver.texi): Removed. 2108 (MOSTLYCLEANFILES): Remove gasver.texi. 2109 (as.1): Don't depend on gasver.texi. 2110 * doc/Makefile.in: Regenerated. 2111 2112 * doc/as.texi: Include bfdver.texi instead of gasver.texi. 2113 21142007-03-14 Daniel Jacobowitz <dan@codesourcery.com> 2115 2116 * config/tc-arm.c (arm_copy_symbol_attributes): New. 2117 * config/tc-arm.h (arm_copy_symbol_attributes): Declare. 2118 (TC_COPY_SYMBOL_ATTRIBUTES): Define. 2119 * gas/symbols.c (copy_symbol_attributes): Use 2120 TC_COPY_SYMBOL_ATTRIBUTES. 2121 21222007-03-14 Paul Brook <paul@codesourcery.com> 2123 2124 * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding. 2125 21262007-03-14 Alan Modra <amodra@bigpond.net.au> 2127 2128 PR 4029 2129 * write.c (relax_segment): Insert extra alignment padding 2130 to break infinite relax loop when given impossible 2131 gcc_except_table assembly. 2132 21332007-03-12 H.J. Lu <hongjiu.lu@intel.com> 2134 2135 * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX 2136 on i.tm.base_opcode. 2137 (match_template): Likewise. 2138 (process_operands): Use ~0x3 mask to match MOV_AX_DISP32. 2139 2140 * config/tc-i386.h (Opcode_D): New. 2141 (Opcode_FloatR): Likewise. 2142 (Opcode_FloatD): Likewise. 2143 (D): Redefined. 2144 (W): Likewise. 2145 (FloatMF): Likewise. 2146 (FloatR): Likewise. 2147 (FloatD): Likewise. 2148 21492007-03-09 Alexandre Oliva <aoliva@redhat.com> 2150 2151 * app.c (do_scrub_chars): Recognize comments after # line "file". 2152 * read.c (get_linefile_number): New. 2153 (s_app_line): Accept ill-formed .linefile lines as comments. 2154 21552007-03-09 Alan Modra <amodra@bigpond.net.au> 2156 2157 * config/tc-i386.h (WORKING_DOT_WORD): Define. 2158 21592007-03-09 Alexandre Oliva <aoliva@redhat.com> 2160 2161 * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile. 2162 * as.h (new_logical_line_flags): New. 2163 * input-scrub.c (new_logical_line): Turned into wrapper for... 2164 (new_logical_line_flags): this. Handle flags. 2165 * read.c (potable): Add linefile. Adjust appline argument. 2166 (s_app_file): Fake .appfiles no more. 2167 (s_app_line): For .linefile, accept file name and flags. 2168 21692007-03-08 Alan Modra <amodra@bigpond.net.au> 2170 2171 * symbols.c (symbol_relc_make_sym): Comment typo fixes. 2172 21732007-03-08 Alan Modra <amodra@bigpond.net.au> 2174 2175 * Makefile.am: Run "make dep-am". 2176 * Makefile.in: Regenerate. 2177 * po/POTFILES.in: Regenerate. 2178 21792007-03-07 Joseph Myers <joseph@codesourcery.com> 2180 2181 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of 2182 bug-reporting URL. 2183 * doc/Makefile.am (gasver.texi): Define BUGURL. 2184 * doc/as.texinfo: Use BUGURL. 2185 * Makefile.in, configure, doc/Makefile.in: Regenerate. 2186 21872007-03-06 Andreas Krebbel <krebbel1@de.ibm.com> 2188 2189 * config/tc-s390.c (md_parse_option): z9-ec option added. 2190 21912007-03-02 Paul Brook <paul@codesourcery.com> 2192 2193 * config/tc-arm.c (relax_immediate): Always return positive values. 2194 (relaxed_symbol_addr): New function. 2195 (relax_adr, relax_branch): Use it. 2196 (arm_relax_frag): Pass strect argument. Adjust infinite loop check. 2197 21982007-03-01 Joseph Myers <joseph@codesourcery.com> 2199 2200 * as.c (parse_args): Update copyright date. 2201 22022007-02-28 Nathan Sidwell <nathan@codesourcery.com> 2203 2204 * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf. 2205 22062007-02-28 Nick Clifton <nickc@redhat.com> 2207 2208 PR gas/3797 2209 * config/tc-d10v.c (do_assemble): Do not generate error messages, 2210 just return -1 whenever a problem is encountered. 2211 (md_assemble): If do_assemble returns -1 generate a non-fatal 2212 error message and return. 2213 2214 PR gas/2623 2215 * config/tc-msp430.c (line_separator_char): Change to '{'. 2216 22172007-02-27 Alan Modra <amodra@bigpond.net.au> 2218 2219 * config/tc-m68hc11.c (fixup24): Correct fixup size. 2220 (build_jump_insn): Likewise. 2221 (build_insn): Likewise. 2222 (s_m68hc11_relax): Likewise. 2223 22242007-02-27 Alan Modra <amodra@bigpond.net.au> 2225 2226 * config/obj-elf.c (elf_frob_file): frag_wane any new frags. 2227 22282007-02-25 Mark Shinwell <shinwell@codesourcery.com> 2229 2230 * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad. 2231 22322007-02-23 Alan Modra <amodra@bigpond.net.au> 2233 2234 * config/tc-mn10300.c (md_convert_frag): Correct fixup size. 2235 (md_assemble): Likewise. 2236 22372007-02-22 Alan Modra <amodra@bigpond.net.au> 2238 2239 * write.c (size_seg): Always clear SEC_RELOC here. 2240 (install_reloc): New function, extracted from.. 2241 (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code 2242 with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when 2243 testing frag size. Set SEC_RELOC here. 2244 22452007-02-21 Alan Modra <amodra@bigpond.net.au> 2246 2247 PR 4082 2248 * config/tc-avr.h (TC_FX_SIZE_SLACK): Define. 2249 22502007-02-20 Thiemo Seufer <ths@mips.com> 2251 2252 * doc/c-mips.texi: Document 74kc, 74kf, 74kx. 2253 22542007-02-20 Thiemo Seufer <ths@mips.com> 2255 2256 * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations. 2257 22582007-02-20 Thiemo Seufer <ths@mips.com> 2259 Chao-Ying Fu <fu@mips.com> 2260 2261 * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2, 2262 ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support. 2263 (macro_build): Add case '2'. 2264 (macro): Expand M_BALIGN to nop, packrl.ph or balign. 2265 (validate_mips_insn): Add support for balign instruction. 2266 (mips_ip): Handle DSP R2 instructions. Support balign instruction. 2267 (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE, 2268 md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2 2269 command line options. 2270 (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives. 2271 (md_show_usage): Add -mdspr2 and -mno-dspr2 help output. 2272 * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2, 2273 .set dspr2, .set nodspr2. 2274 22752007-02-20 Nathan Sidwell <nathan@codesourcery.com> 2276 2277 * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New. 2278 (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225. 2279 22802007-02-18 Alan Modra <amodra@bigpond.net.au> 2281 2282 * write.c (TC_FX_SIZE_SLACK): Define. 2283 (write_relocs): Reinstate check for fixup within frag. 2284 * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define. 2285 * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define. 2286 * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define. 2287 * config/tc-sh.h (TC_FX_SIZE_SLACK): Define. 2288 * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define. 2289 22902007-02-17 Mark Mitchell <mark@codesourcery.com> 2291 Nathan Sidwell <nathan@codesourcery.com> 2292 Vladimir Prus <vladimir@codesourcery.com 2293 Joseph Myers <joseph@codesourcery.com> 2294 2295 * configure.in (--with-bugurl): New option. 2296 * configure: Regenerate. 2297 * dep-in.sed: Remove bin-bugs.h. 2298 * Makefile.am (REPORT_BUGS_TO): Define. 2299 (INCLUDES): Define REPORT_BUGS_TO. 2300 (DEP_INCLUDES): Likewise. 2301 ($(OBJS)): No longer depend on bin-bugs.h. 2302 * Makefile.in: Regenerate. 2303 * doc/Makefile.in: Regenerate. 2304 * as.c (show_usage): Don't print empty REPORT_BUGS_TO. 2305 * as.h: Remove include of bin-bugs.h. 2306 23072007-02-17 Alan Modra <amodra@bigpond.net.au> 2308 2309 * write.c: White space fixes. 2310 (fixup_segment): Move symbol_mri_common_p adjustments.. 2311 (write_relocs): ..and symbol_equated_reloc_p adjustments.. 2312 (adjust_reloc_syms): ..to here. 2313 23142007-02-16 Alan Modra <amodra@bigpond.net.au> 2315 2316 * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than 2317 xmalloc, memset. Don't bother assigning NULL to known zero mem. 2318 (subseg_set_rest): Remove unnecessary cast. 2319 * write.c: Include libbfd.h. Replace PTR with void * throughout. 2320 Remove unnecessary forward declarations and casts. 2321 (set_symtab): Delete extern bfd_alloc. 2322 (fixup_segment): Move. 2323 23242007-02-15 Nathan Sidwell <nathan@codesourcery.com> 2325 2326 * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID. 2327 * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names. 2328 (mcf5475_ctrl, mcf5485_ctrl): New. 2329 (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families. 2330 (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling. 2331 (init_table): Add asid, mmubar, adjust rombar0. 2332 23332007-02-14 Alan Modra <amodra@bigpond.net.au> 2334 2335 * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete. 2336 * config/tc-i386.c: Wrap overly long lines, whitespace fixes. 2337 (process_operands): Move old Seg2ShortForm and Seg3ShortForm 2338 code, and test for these insns using a combination of 2339 opcode_modifier and operand_types. 2340 23412007-02-07 Paul Brook <paul@codesourcery.com> 2342 2343 * configure.tgt: Add arm*-*-uclinux-*eabi. 2344 23452007-02-05 Dave Brolley <brolley@redhat.com> 2346 Richard Sandiford <rsandifo@redhat.com> 2347 DJ Delorie <dj@redhat.com> 2348 Stan Cox <scox@redhat.com> 2349 Jim Blandy <jimb@redhat.com> 2350 Nick Clifton <nickc@redhat.com> 2351 Jim Wilson <wilson@redhat.com> 2352 Frank Ch. Eigler <fche@redhat.com> 2353 Graydon Hoare <graydon@redhat.com> 2354 Ben Elliston <bje@redhat.com> 2355 John Healy <jhealy@redhat.com> 2356 Richard Henderson <rth@redhat.com> 2357 2358 * Makefile.am (CPU_TYPES): Add mep. 2359 (TARGET_CPU_CFILES): Add tc-mep.c. 2360 (TARGET_CPU_HFILES): Add tc-mep.h. 2361 (DEPTC_mep_elf): New variable. 2362 (DEPTC_mep_coff): Likewise. 2363 (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise. 2364 * configure.in: Support mep. 2365 * configure.tgt: Likewise. 2366 * config/tc-mep.c: New file. 2367 * config/obj-elf.c: New file. 2368 * config/tc-mep.c: New file. 2369 * config/tc-mep.h: New file. 2370 * Makefile.in: Regenerate. 2371 * configure: Regenerate. 2372 23732007-02-05 Dave Brolley <brolley@redhat.com> 2374 2375 * cgen.c (gas_cgen_install_complex_reloc): Removed. 2376 (complex_reloc_installation_howto): Removed. 2377 23782007-02-05 Dave Brolley <brolley@redhat.com> 2379 Graydon Hoare <graydon@redhat.com> 2380 DJ Delorie <dj@redhat.com> 2381 Catherine Moore <clm@redhat.com> 2382 Michael Chastain <chastain@redhat.com> 2383 Frank Ch. Eigler <fche@redhat.com> 2384 2385 * symbols.c (use_complex_relocs_for): New, to decide 2386 when to use complex relocs. Add signed RELC support. 2387 (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally 2388 encode expression symbols as mangled complex relocation symbols (when 2389 compiled with -DOBJ_COMPLEX_RELOC). 2390 (symbol_relc_make_sym,value,expr): New traversal/conversion routines. 2391 * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call 2392 encode_addend with new args. Modify to get start, length from 2393 ifield whenever it is set. Also change condition on which 2394 self-describing relocs are encoded. Add hook into 2395 gas_cgen_encode_addend. 2396 (queue_fixup_recursively): Add signed RELC support. Change from masked 2397 expr to trunc flag. Restore assignment of sub-field value to 2398 temporary in fixups array. Reflect changed meaning of last arg to 2399 queue_fixup_recursively. 2400 (fixup): Add cgen_maybe_multi_ifield member. 2401 (make_right_shifted_expr): New function. 2402 (queue_fixup): Change to recursive function that fragments 2403 fixups if operand has a multi-ifield. 2404 (gas_cgen_parse_operand): Add RELC code to wrap expressions in 2405 symbols, call weak_operand_overflow_check, and fragment call 2406 queue_fixup with operand fields. 2407 (gas_cgen_finish_insn) Modify to manage ifield pointer. 2408 (weak_operand_overflow_check): New function to try to select 2409 insns correctly. 2410 (gas_cgen_encode_addend): New function for relc. 2411 (gas_cgen_install_complex_reloc): Likewise. 2412 (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc. 2413 * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add 2414 cgen_maybe_multi_ifield field to fx_cgen substructure. 2415 * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32. 2416 * symbols.h (symbol_relc_make_sym,value,expr): New prototypes. 2417 24182007-02-03 DJ Delorie <dj@delorie.com> 2419 2420 * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3 2421 byte relocs. 2422 * config/tc-m32c.h (TC_CONS_FIX_NEW): Define. 2423 (m32c_cons_fix_new): Prototype. 2424 24252007-02-02 Bob Wilson <bob.wilson@acm.org> 2426 2427 * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init. 2428 (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise. 2429 24302007-02-02 Bob Wilson <bob.wilson@acm.org> 2431 2432 * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New. 2433 (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table. 2434 (map_suffix_reloc_to_operator): New. 2435 (map_operator_to_reloc): New. 2436 (expression_maybe_register): Fix incorrect test of return value from 2437 xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator. 2438 (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc. 2439 24402007-02-02 Bob Wilson <bob.wilson@acm.org> 2441 2442 * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field. 2443 (tinsn_get_tok): Delete prototype. 2444 * config/tc-xtensa.c (tinsn_get_tok): Delete. 2445 24462007-02-02 Bob Wilson <bob.wilson@acm.org> 2447 2448 * config/xtensa-relax.h (struct build_instr): Delete id field. 2449 * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL 2450 and LABEL tokens. 2451 (append_literal_op, append_label_op): Remove litnum/labnum arguments; 2452 set op_data fields to zero. 2453 (parse_id_constant): Delete. 2454 (build_transition): Remove code to handle numbered literals and labels. 2455 24562007-02-02 Bob Wilson <bob.wilson@acm.org> 2457 2458 * config/xtensa-relax.c (build_transition): Remove code after as_fatal. 2459 (build_transition_table): Likewise. 2460 24612007-02-01 Bob Wilson <bob.wilson@acm.org> 2462 2463 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of 2464 fx_tcbit. 2465 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove. 2466 24672007-02-02 Alan Modra <amodra@bigpond.net.au> 2468 2469 * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move. 2470 (struct fix <fx_plt>): Rename to tcbit2. 2471 * write.c (fix_new_internal): Adjust. 2472 (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt. 2473 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise. 2474 * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise. 2475 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise. 2476 * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise. 2477 * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise. 2478 * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise. 2479 * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise. 2480 * config/tc-msp430.c (msp430_force_relocation_local): Likewise. 2481 * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt. 2482 * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt. 2483 Instead, compare fx_r_type. 2484 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use 2485 fx_tcbit in place of fx_plt. 2486 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define. 2487 * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference 2488 to fx_plt. 2489 24902007-01-30 Nick Clifton <nickc@redhat.com> 2491 2492 * as.c (main): Mark symbols created via the --defsym command line 2493 option as volatile so that they can be overridden later on by a 2494 .set directive. This maintains compatibility with the behaviour 2495 of earlier versions of the assembler. 2496 * doc/as.texinfo (--defsym): Document that the defined symbol's 2497 value can be overridden via a .set directive. 2498 24992007-01-28 H.J. Lu <hongjiu.lu@intel.com> 2500 2501 * config/tc-i386.c (swap_imm_operands): Renamed to ... 2502 (swap_2_operands): This. Take 2 ints. 2503 (md_assemble): Updated. 2504 (swap_operands): Call swap_2_operands to swap 2 operands. 2505 25062007-01-24 DJ Delorie <dj@redhat.com> 2507 2508 * config/tc-m32c.c (md_pseudo_table): Add .3byte. 2509 25102007-01-22 Nick Clifton <nickc@redhat.com> 2511 2512 PR gas/3871 2513 * tc-score.c: Remove unnecessary uses of _(). 2514 Make the err_msg[] a file level local array in order to save 2515 storage space. 2516 Remove unnecessary sprintf()s. 2517 25182007-01-18 Mei Ligang <ligang@sunnorth.com.cn> 2519 2520 PR gas/3871 2521 * config/tc-score.c : Using _() for const string. 2522 Do not assign inst.error with a local string pointer. 2523 (md_section_align): Pad section. 2524 25252007-01-13 H.J. Lu <hongjiu.lu@intel.com> 2526 2527 * config/tc-i386.c (build_modrm_byte): Check number of operands 2528 when procssing memory/register operand. 2529 25302007-01-12 Nick Clifton <nickc@redhat.com> 2531 2532 PR gas/3856 2533 * macro.c (expand_irp): Do not ignore spaces inside quoted 2534 strings. 2535 25362007-01-12 Alan Modra <amodra@bigpond.net.au> 2537 2538 * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete. 2539 * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete. 2540 * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete. 2541 (TC_FORCE_RELOCATION): Define. 2542 (TC_FORCE_RELOCATION_LOCAL): Define. 2543 * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust. 2544 25452007-01-12 Alan Modra <amodra@bigpond.net.au> 2546 2547 * input-file.c (input_file_open): Check fgets return. 2548 25492007-01-11 Paul Brook <paul@codesourcery.com> 2550 2551 * config/tc-arm.c (do_t_add_sub): Use Rd and Rs. 2552 25532007-01-11 Nick Clifton <nickc@redhat.com> 2554 2555 PR gas/3707 2556 * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt 2557 variable. 2558 2559 * config/tc-mcore.c (md_number_to_chars): Use 2560 number_to_chars_{big|little}endian. 2561 25622007-01-08 Kazu Hirata <kazu@codesourcery.com> 2563 2564 * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an 2565 architecture by itself. 2566 (m68k_ip): Don't issue a warning for tbl instructions on fido. 2567 (m68k_elf_final_processing): Treat Fido as an architecture by 2568 itself. 2569 25702007-01-08 Kai Tietz <kai.tietz@onevision.com> 2571 2572 * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw* 2573 25742007-01-05 H.J. Lu <hongjiu.lu@intel.com> 2575 2576 * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax 2577 depending on allow_naked_reg. 2578 25792007-01-04 Paul Brook <paul@codesourcery.com> 2580 2581 * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form. 2582 25832007-01-04 H.J. Lu <hongjiu.lu@intel.com> 2584 2585 PR gas/3830 2586 * config/tc-i386.c (register_prefix): New. 2587 (set_intel_syntax): Set set_intel_syntax to "" if register 2588 prefix isn't needed. 2589 (check_byte_reg): Use register_prefix for error message. 2590 (check_long_reg): Likewise. 2591 (check_qword_reg): Likewise. 2592 (check_word_reg): Likewise. 2593 25942007-01-04 Julian Brown <julian@codesourcery.com> 2595 2596 * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM. 2597 (do_neon_qshl_imm): Likewise. 2598 (do_neon_rshl): New function. Handle rounding variants of 2599 v{q}shl-by-register. 2600 (insns): Use do_neon_rshl for vrshl, vqrshl. 2601 26022007-01-04 Paul Brook <paul@codesourcery.com> 2603 2604 * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt 2605 and vacle. 2606 26072007-01-03 H.J. Lu <hongjiu.lu@intel.com> 2608 2609 * config/tc-i386.c (swap_operands): Remove branches. 2610 26112007-01-03 H.J. Lu <hongjiu.lu@intel.com> 2612 2613 * config/tc-i386.c: Update copyright year. 2614 * config/tc-i386.h: Likewise. 2615 26162007-01-03 H.J. Lu <hongjiu.lu@intel.com> 2617 2618 * config/tc-i386.c (smallest_imm_type): Return unsigned int 2619 instead of int. 2620 26212007-01-03 H.J. Lu <hongjiu.lu@intel.com> 2622 2623 * config/tc-i386.c: Convert to ISO C90 formatting 2624 * config/tc-i386.h: Likewise. 2625 26262007-01-03 David Daney <ddaney@avtrex.com> 2627 2628 * config/tc-mips.c (md_show_usage): Clean up -mno-shared 2629 documentation. 2630 2631For older changes see ChangeLog-2006 2632 2633Copyright (C) 2006 Free Software Foundation, Inc. 2634 2635Copying and distribution of this file, with or without modification, 2636are permitted in any medium without royalty provided the copyright 2637notice and this notice are preserved. 2638 2639Local Variables: 2640mode: change-log 2641left-margin: 8 2642fill-column: 74 2643version-control: never 2644End: 2645