1 /* Remote target system call callback support.
2    Copyright 1997 Free Software Foundation, Inc.
3    Contributed by Cygnus Solutions.
4 
5 This file is part of GDB.
6 
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
11 
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15 GNU General Public License for more details.
16 
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
20 
21 /* This interface isn't intended to be specific to any particular kind
22    of remote (hardware, simulator, whatever).  As such, support for it
23    (e.g. sim/common/callback.c) should *not* live in the simulator source
24    tree, nor should it live in the gdb source tree.  */
25 
26 /* There are various ways to handle system calls:
27 
28    1) Have a simulator intercept the appropriate trap instruction and
29    directly perform the system call on behalf of the target program.
30    This is the typical way of handling system calls for embedded targets.
31    [Handling system calls for embedded targets isn't that much of an
32    oxymoron as running compiler testsuites make use of the capability.]
33 
34    This method of system call handling is done when STATE_ENVIRONMENT
35    is ENVIRONMENT_USER.
36 
37    2) Have a simulator emulate the hardware as much as possible.
38    If the program running on the real hardware communicates with some sort
39    of target manager, one would want to be able to run this program on the
40    simulator as well.
41 
42    This method of system call handling is done when STATE_ENVIRONMENT
43    is ENVIRONMENT_OPERATING.
44 */
45 
46 #ifndef CALLBACK_H
47 #define CALLBACK_H
48 
49 /* ??? The reason why we check for va_start here should be documented.  */
50 
51 #ifndef va_start
52 #include <ansidecl.h>
53 #include <stdarg.h>
54 #endif
55 /* Needed for enum bfd_endian.  */
56 #include "bfd.h"
57 
58 /* Mapping of host/target values.  */
59 /* ??? For debugging purposes, one might want to add a string of the
60    name of the symbol.  */
61 
62 typedef struct {
63   int host_val;
64   int target_val;
65 } CB_TARGET_DEFS_MAP;
66 
67 #define MAX_CALLBACK_FDS 10
68 
69 /* Forward decl for stat/fstat.  */
70 struct stat;
71 
72 typedef struct host_callback_struct host_callback;
73 
74 struct host_callback_struct
75 {
76   int (*close) PARAMS ((host_callback *,int));
77   int (*get_errno) PARAMS ((host_callback *));
78   int (*isatty) PARAMS ((host_callback *, int));
79   int (*lseek) PARAMS ((host_callback *, int, long , int));
80   int (*open) PARAMS ((host_callback *, const char*, int mode));
81   int (*read) PARAMS ((host_callback *,int,  char *, int));
82   int (*read_stdin) PARAMS (( host_callback *, char *, int));
83   int (*rename) PARAMS ((host_callback *, const char *, const char *));
84   int (*system) PARAMS ((host_callback *, const char *));
85   long (*time) PARAMS ((host_callback *, long *));
86   int (*unlink) PARAMS ((host_callback *, const char *));
87   int (*write) PARAMS ((host_callback *,int, const char *, int));
88   int (*write_stdout) PARAMS ((host_callback *, const char *, int));
89   void (*flush_stdout) PARAMS ((host_callback *));
90   int (*write_stderr) PARAMS ((host_callback *, const char *, int));
91   void (*flush_stderr) PARAMS ((host_callback *));
92   int (*stat) PARAMS ((host_callback *, const char *, struct stat *));
93   int (*fstat) PARAMS ((host_callback *, int, struct stat *));
94   int (*lstat) PARAMS ((host_callback *, const char *, struct stat *));
95   int (*ftruncate) PARAMS ((host_callback *, int, long));
96   int (*truncate) PARAMS ((host_callback *, const char *, long));
97   int (*pipe) PARAMS ((host_callback *, int *));
98 
99   /* Called by the framework when a read call has emptied a pipe buffer.  */
100   void (*pipe_empty) PARAMS ((host_callback *, int read_fd, int write_fd));
101 
102   /* Called by the framework when a write call makes a pipe buffer
103      non-empty.  */
104   void (*pipe_nonempty) PARAMS ((host_callback *, int read_fd, int write_fd));
105 
106   /* When present, call to the client to give it the oportunity to
107      poll any io devices for a request to quit (indicated by a nonzero
108      return value). */
109   int (*poll_quit) PARAMS ((host_callback *));
110 
111   /* Used when the target has gone away, so we can close open
112      handles and free memory etc etc.  */
113   int (*shutdown) PARAMS ((host_callback *));
114   int (*init)     PARAMS ((host_callback *));
115 
116   /* depreciated, use vprintf_filtered - Talk to the user on a console.  */
117   void (*printf_filtered) PARAMS ((host_callback *, const char *, ...));
118 
119   /* Talk to the user on a console.  */
120   void (*vprintf_filtered) PARAMS ((host_callback *, const char *, va_list));
121 
122   /* Same as vprintf_filtered but to stderr.  */
123   void (*evprintf_filtered) PARAMS ((host_callback *, const char *, va_list));
124 
125   /* Print an error message and "exit".
126      In the case of gdb "exiting" means doing a longjmp back to the main
127      command loop.  */
128   void (*error) PARAMS ((host_callback *, const char *, ...));
129 
130   int last_errno;		/* host format */
131 
132   int fdmap[MAX_CALLBACK_FDS];
133   /* fd_buddy is used to contruct circular lists of target fds that point to
134      the same host fd.  A uniquely mapped fd points to itself; for a closed
135      one, fd_buddy has the value -1.  The host file descriptors for stdin /
136      stdout / stderr are never closed by the simulators, so they are put
137      in a special fd_buddy circular list which also has MAX_CALLBACK_FDS
138      as a member.  */
139   /* ??? We don't have a callback entry for dup, although it is trival to
140      implement now.  */
141   short fd_buddy[MAX_CALLBACK_FDS+1];
142 
143   /* 0 = none, >0 = reader (index of writer),
144      <0 = writer (negative index of reader).
145      If abs (ispipe[N]) == N, then N is an end of a pipe whose other
146      end is closed.  */
147   short ispipe[MAX_CALLBACK_FDS];
148 
149   /* A writer stores the buffer at its index.  Consecutive writes
150      realloc the buffer and add to the size.  The reader indicates the
151      read part in its .size, until it has consumed it all, at which
152      point it deallocates the buffer and zeroes out both sizes.  */
153   struct pipe_write_buffer
154   {
155     int size;
156     char *buffer;
157   } pipe_buffer[MAX_CALLBACK_FDS];
158 
159   /* System call numbers.  */
160   CB_TARGET_DEFS_MAP *syscall_map;
161   /* Errno values.  */
162   CB_TARGET_DEFS_MAP *errno_map;
163   /* Flags to the open system call.  */
164   CB_TARGET_DEFS_MAP *open_map;
165   /* Signal numbers.  */
166   CB_TARGET_DEFS_MAP *signal_map;
167   /* Layout of `stat' struct.
168      The format is a series of "name,length" pairs separated by colons.
169      Empty space is indicated with a `name' of "space".
170      All padding must be explicitly mentioned.
171      Lengths are in bytes.  If this needs to be extended to bits,
172      use "name.bits".
173      Example: "st_dev,4:st_ino,4:st_mode,4:..."  */
174   const char *stat_map;
175 
176   enum bfd_endian target_endian;
177 
178   /* Size of an "int" on the target (for syscalls whose ABI uses "int").
179      This must include padding, and only padding-at-higher-address is
180      supported.  For example, a 64-bit target with 32-bit int:s which
181      are padded to 64 bits when in an array, should supposedly set this
182      to 8.  The default is 4 which matches ILP32 targets and 64-bit
183      targets with 32-bit ints and no padding.  */
184   int target_sizeof_int;
185 
186   /* Marker for those wanting to do sanity checks.
187      This should remain the last member of this struct to help catch
188      miscompilation errors. */
189 #define HOST_CALLBACK_MAGIC 4705 /* teds constant */
190   int magic;
191 };
192 
193 extern host_callback default_callback;
194 
195 /* Canonical versions of system call numbers.
196    It's not intended to willy-nilly throw every system call ever heard
197    of in here.  Only include those that have an important use.
198    ??? One can certainly start a discussion over the ones that are currently
199    here, but that will always be true.  */
200 
201 /* These are used by the ANSI C support of libc.  */
202 #define	CB_SYS_exit	1
203 #define	CB_SYS_open	2
204 #define	CB_SYS_close	3
205 #define	CB_SYS_read	4
206 #define	CB_SYS_write	5
207 #define	CB_SYS_lseek	6
208 #define	CB_SYS_unlink	7
209 #define	CB_SYS_getpid	8
210 #define	CB_SYS_kill	9
211 #define CB_SYS_fstat    10
212 /*#define CB_SYS_sbrk	11 - not currently a system call, but reserved.  */
213 
214 /* ARGV support.  */
215 #define CB_SYS_argvlen	12
216 #define CB_SYS_argv	13
217 
218 /* These are extras added for one reason or another.  */
219 #define CB_SYS_chdir	14
220 #define CB_SYS_stat	15
221 #define CB_SYS_chmod 	16
222 #define CB_SYS_utime 	17
223 #define CB_SYS_time 	18
224 
225 /* More standard syscalls.  */
226 #define CB_SYS_lstat    19
227 #define CB_SYS_rename	20
228 #define CB_SYS_truncate	21
229 #define CB_SYS_ftruncate 22
230 #define CB_SYS_pipe 	23
231 
232 /* Struct use to pass and return information necessary to perform a
233    system call.  */
234 /* FIXME: Need to consider target word size.  */
235 
236 typedef struct cb_syscall {
237   /* The target's value of what system call to perform.  */
238   int func;
239   /* The arguments to the syscall.  */
240   long arg1, arg2, arg3, arg4;
241 
242   /* The result.  */
243   long result;
244   /* Some system calls have two results.  */
245   long result2;
246   /* The target's errno value, or 0 if success.
247      This is converted to the target's value with host_to_target_errno.  */
248   int errcode;
249 
250   /* Working space to be used by memory read/write callbacks.  */
251   PTR p1;
252   PTR p2;
253   long x1,x2;
254 
255   /* Callbacks for reading/writing memory (e.g. for read/write syscalls).
256      ??? long or unsigned long might be better to use for the `count'
257      argument here.  We mimic sim_{read,write} for now.  Be careful to
258      test any changes with -Wall -Werror, mixed signed comparisons
259      will get you.  */
260   int (*read_mem) PARAMS ((host_callback * /*cb*/, struct cb_syscall * /*sc*/,
261 			   unsigned long /*taddr*/, char * /*buf*/,
262 			   int /*bytes*/));
263   int (*write_mem) PARAMS ((host_callback * /*cb*/, struct cb_syscall * /*sc*/,
264 			    unsigned long /*taddr*/, const char * /*buf*/,
265 			    int /*bytes*/));
266 
267   /* For sanity checking, should be last entry.  */
268   int magic;
269 } CB_SYSCALL;
270 
271 /* Magic number sanity checker.  */
272 #define CB_SYSCALL_MAGIC 0x12344321
273 
274 /* Macro to initialize CB_SYSCALL.  Called first, before filling in
275    any fields.  */
276 #define CB_SYSCALL_INIT(sc) \
277 do { \
278   memset ((sc), 0, sizeof (*(sc))); \
279   (sc)->magic = CB_SYSCALL_MAGIC; \
280 } while (0)
281 
282 /* Return codes for various interface routines.  */
283 
284 typedef enum {
285   CB_RC_OK = 0,
286   /* generic error */
287   CB_RC_ERR,
288   /* either file not found or no read access */
289   CB_RC_ACCESS,
290   CB_RC_NO_MEM
291 } CB_RC;
292 
293 /* Read in target values for system call numbers, errno values, signals.  */
294 CB_RC cb_read_target_syscall_maps PARAMS ((host_callback *, const char *));
295 
296 /* Translate target to host syscall function numbers.  */
297 int cb_target_to_host_syscall PARAMS ((host_callback *, int));
298 
299 /* Translate host to target errno value.  */
300 int cb_host_to_target_errno PARAMS ((host_callback *, int));
301 
302 /* Translate target to host open flags.  */
303 int cb_target_to_host_open PARAMS ((host_callback *, int));
304 
305 /* Translate target signal number to host.  */
306 int cb_target_to_host_signal PARAMS ((host_callback *, int));
307 
308 /* Translate host signal number to target.  */
309 int cb_host_to_target_signal PARAMS ((host_callback *, int));
310 
311 /* Translate host stat struct to target.
312    If stat struct ptr is NULL, just compute target stat struct size.
313    Result is size of target stat struct or 0 if error.  */
314 int cb_host_to_target_stat PARAMS ((host_callback *, const struct stat *, PTR));
315 
316 /* Translate a value to target endian.  */
317 void cb_store_target_endian PARAMS ((host_callback *, char *, int, long));
318 
319 /* Perform a system call.  */
320 CB_RC cb_syscall PARAMS ((host_callback *, CB_SYSCALL *));
321 
322 #endif
323