1; Test the handling of base + index + 12-bit displacement addresses for 2; large frames, in cases where no 20-bit form exists. The tests here 3; assume z10 register pressure, without the high words being available. 4; 5; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z10 | \ 6; RUN: FileCheck -check-prefix=CHECK-NOFP %s 7; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z10 -frame-pointer=all | \ 8; RUN: FileCheck -check-prefix=CHECK-FP %s 9 10declare void @foo(float *%ptr1, float *%ptr2) 11 12; This file tests what happens when a displacement is converted from 13; being relative to the start of a frame object to being relative to 14; the frame itself. In some cases the test is only possible if two 15; objects are allocated. 16; 17; Rather than rely on a particular order for those objects, the tests 18; instead allocate two objects of the same size and apply the test to 19; both of them. For consistency, all tests follow this model, even if 20; one object would actually be enough. 21 22; First check the highest in-range offset after conversion, which is 4092 23; for word-addressing instructions like LDEB. 24; 25; The last in-range doubleword offset is 4088. Since the frame has two 26; emergency spill slots at 160(%r15), the amount that we need to allocate 27; in order to put another object at offset 4088 is (4088 - 176) / 4 = 978 28; words. 29define void @f1(double *%dst) { 30; CHECK-NOFP-LABEL: f1: 31; CHECK-NOFP: ldeb {{%f[0-7]}}, 4092(%r15) 32; CHECK-NOFP: br %r14 33; 34; CHECK-FP-LABEL: f1: 35; CHECK-FP: ldeb {{%f[0-7]}}, 4092(%r11) 36; CHECK-FP: br %r14 37 %region1 = alloca [978 x float], align 8 38 %region2 = alloca [978 x float], align 8 39 %start1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 0 40 %start2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 0 41 call void @foo(float *%start1, float *%start2) 42 %ptr1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 1 43 %ptr2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 1 44 %float1 = load float, float *%ptr1 45 %float2 = load float, float *%ptr2 46 %double1 = fpext float %float1 to double 47 %double2 = fpext float %float2 to double 48 store volatile double %double1, double *%dst 49 store volatile double %double2, double *%dst 50 ret void 51} 52 53; Test the first out-of-range offset. 54define void @f2(double *%dst) { 55; CHECK-NOFP-LABEL: f2: 56; CHECK-NOFP: lghi %r1, 4096 57; CHECK-NOFP: ldeb {{%f[0-7]}}, 0(%r1,%r15) 58; CHECK-NOFP: br %r14 59; 60; CHECK-FP-LABEL: f2: 61; CHECK-FP: lghi %r1, 4096 62; CHECK-FP: ldeb {{%f[0-7]}}, 0(%r1,%r11) 63; CHECK-FP: br %r14 64 %region1 = alloca [978 x float], align 8 65 %region2 = alloca [978 x float], align 8 66 %start1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 0 67 %start2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 0 68 call void @foo(float *%start1, float *%start2) 69 %ptr1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 2 70 %ptr2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 2 71 %float1 = load float, float *%ptr1 72 %float2 = load float, float *%ptr2 73 %double1 = fpext float %float1 to double 74 %double2 = fpext float %float2 to double 75 store volatile double %double1, double *%dst 76 store volatile double %double2, double *%dst 77 ret void 78} 79 80; Test the next offset after that. 81define void @f3(double *%dst) { 82; CHECK-NOFP-LABEL: f3: 83; CHECK-NOFP: lghi %r1, 4096 84; CHECK-NOFP: ldeb {{%f[0-7]}}, 4(%r1,%r15) 85; CHECK-NOFP: br %r14 86; 87; CHECK-FP-LABEL: f3: 88; CHECK-FP: lghi %r1, 4096 89; CHECK-FP: ldeb {{%f[0-7]}}, 4(%r1,%r11) 90; CHECK-FP: br %r14 91 %region1 = alloca [978 x float], align 8 92 %region2 = alloca [978 x float], align 8 93 %start1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 0 94 %start2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 0 95 call void @foo(float *%start1, float *%start2) 96 %ptr1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 3 97 %ptr2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 3 98 %float1 = load float, float *%ptr1 99 %float2 = load float, float *%ptr2 100 %double1 = fpext float %float1 to double 101 %double2 = fpext float %float2 to double 102 store volatile double %double1, double *%dst 103 store volatile double %double2, double *%dst 104 ret void 105} 106 107; Add 4096 bytes (1024 words) to the size of each object and repeat. 108define void @f4(double *%dst) { 109; CHECK-NOFP-LABEL: f4: 110; CHECK-NOFP: lghi %r1, 4096 111; CHECK-NOFP: ldeb {{%f[0-7]}}, 4092(%r1,%r15) 112; CHECK-NOFP: br %r14 113; 114; CHECK-FP-LABEL: f4: 115; CHECK-FP: lghi %r1, 4096 116; CHECK-FP: ldeb {{%f[0-7]}}, 4092(%r1,%r11) 117; CHECK-FP: br %r14 118 %region1 = alloca [2002 x float], align 8 119 %region2 = alloca [2002 x float], align 8 120 %start1 = getelementptr inbounds [2002 x float], [2002 x float]* %region1, i64 0, i64 0 121 %start2 = getelementptr inbounds [2002 x float], [2002 x float]* %region2, i64 0, i64 0 122 call void @foo(float *%start1, float *%start2) 123 %ptr1 = getelementptr inbounds [2002 x float], [2002 x float]* %region1, i64 0, i64 1 124 %ptr2 = getelementptr inbounds [2002 x float], [2002 x float]* %region2, i64 0, i64 1 125 %float1 = load float, float *%ptr1 126 %float2 = load float, float *%ptr2 127 %double1 = fpext float %float1 to double 128 %double2 = fpext float %float2 to double 129 store volatile double %double1, double *%dst 130 store volatile double %double2, double *%dst 131 ret void 132} 133 134; ...as above. 135define void @f5(double *%dst) { 136; CHECK-NOFP-LABEL: f5: 137; CHECK-NOFP: lghi %r1, 8192 138; CHECK-NOFP: ldeb {{%f[0-7]}}, 0(%r1,%r15) 139; CHECK-NOFP: br %r14 140; 141; CHECK-FP-LABEL: f5: 142; CHECK-FP: lghi %r1, 8192 143; CHECK-FP: ldeb {{%f[0-7]}}, 0(%r1,%r11) 144; CHECK-FP: br %r14 145 %region1 = alloca [2002 x float], align 8 146 %region2 = alloca [2002 x float], align 8 147 %start1 = getelementptr inbounds [2002 x float], [2002 x float]* %region1, i64 0, i64 0 148 %start2 = getelementptr inbounds [2002 x float], [2002 x float]* %region2, i64 0, i64 0 149 call void @foo(float *%start1, float *%start2) 150 %ptr1 = getelementptr inbounds [2002 x float], [2002 x float]* %region1, i64 0, i64 2 151 %ptr2 = getelementptr inbounds [2002 x float], [2002 x float]* %region2, i64 0, i64 2 152 %float1 = load float, float *%ptr1 153 %float2 = load float, float *%ptr2 154 %double1 = fpext float %float1 to double 155 %double2 = fpext float %float2 to double 156 store volatile double %double1, double *%dst 157 store volatile double %double2, double *%dst 158 ret void 159} 160 161; ...as above. 162define void @f6(double *%dst) { 163; CHECK-NOFP-LABEL: f6: 164; CHECK-NOFP: lghi %r1, 8192 165; CHECK-NOFP: ldeb {{%f[0-7]}}, 4(%r1,%r15) 166; CHECK-NOFP: br %r14 167; 168; CHECK-FP-LABEL: f6: 169; CHECK-FP: lghi %r1, 8192 170; CHECK-FP: ldeb {{%f[0-7]}}, 4(%r1,%r11) 171; CHECK-FP: br %r14 172 %region1 = alloca [2002 x float], align 8 173 %region2 = alloca [2002 x float], align 8 174 %start1 = getelementptr inbounds [2002 x float], [2002 x float]* %region1, i64 0, i64 0 175 %start2 = getelementptr inbounds [2002 x float], [2002 x float]* %region2, i64 0, i64 0 176 call void @foo(float *%start1, float *%start2) 177 %ptr1 = getelementptr inbounds [2002 x float], [2002 x float]* %region1, i64 0, i64 3 178 %ptr2 = getelementptr inbounds [2002 x float], [2002 x float]* %region2, i64 0, i64 3 179 %float1 = load float, float *%ptr1 180 %float2 = load float, float *%ptr2 181 %double1 = fpext float %float1 to double 182 %double2 = fpext float %float2 to double 183 store volatile double %double1, double *%dst 184 store volatile double %double2, double *%dst 185 ret void 186} 187 188; Now try an offset of 4092 from the start of the object, with the object 189; being at offset 8192. This time we need objects of (8192 - 168) / 4 = 2004 190; words. 191define void @f7(double *%dst) { 192; CHECK-NOFP-LABEL: f7: 193; CHECK-NOFP: lghi %r1, 8192 194; CHECK-NOFP: ldeb {{%f[0-7]}}, 4092(%r1,%r15) 195; CHECK-NOFP: br %r14 196; 197; CHECK-FP-LABEL: f7: 198; CHECK-FP: lghi %r1, 8192 199; CHECK-FP: ldeb {{%f[0-7]}}, 4092(%r1,%r11) 200; CHECK-FP: br %r14 201 %region1 = alloca [2004 x float], align 8 202 %region2 = alloca [2004 x float], align 8 203 %start1 = getelementptr inbounds [2004 x float], [2004 x float]* %region1, i64 0, i64 0 204 %start2 = getelementptr inbounds [2004 x float], [2004 x float]* %region2, i64 0, i64 0 205 call void @foo(float *%start1, float *%start2) 206 %ptr1 = getelementptr inbounds [2004 x float], [2004 x float]* %region1, i64 0, i64 1023 207 %ptr2 = getelementptr inbounds [2004 x float], [2004 x float]* %region2, i64 0, i64 1023 208 %float1 = load float, float *%ptr1 209 %float2 = load float, float *%ptr2 210 %double1 = fpext float %float1 to double 211 %double2 = fpext float %float2 to double 212 store volatile double %double1, double *%dst 213 store volatile double %double2, double *%dst 214 ret void 215} 216 217; Keep the object-relative offset the same but bump the size of the 218; objects by one doubleword. 219define void @f8(double *%dst) { 220; CHECK-NOFP-LABEL: f8: 221; CHECK-NOFP: lghi %r1, 12288 222; CHECK-NOFP: ldeb {{%f[0-7]}}, 4(%r1,%r15) 223; CHECK-NOFP: br %r14 224; 225; CHECK-FP-LABEL: f8: 226; CHECK-FP: lghi %r1, 12288 227; CHECK-FP: ldeb {{%f[0-7]}}, 4(%r1,%r11) 228; CHECK-FP: br %r14 229 %region1 = alloca [2006 x float], align 8 230 %region2 = alloca [2006 x float], align 8 231 %start1 = getelementptr inbounds [2006 x float], [2006 x float]* %region1, i64 0, i64 0 232 %start2 = getelementptr inbounds [2006 x float], [2006 x float]* %region2, i64 0, i64 0 233 call void @foo(float *%start1, float *%start2) 234 %ptr1 = getelementptr inbounds [2006 x float], [2006 x float]* %region1, i64 0, i64 1023 235 %ptr2 = getelementptr inbounds [2006 x float], [2006 x float]* %region2, i64 0, i64 1023 236 %float1 = load float, float *%ptr1 237 %float2 = load float, float *%ptr2 238 %double1 = fpext float %float1 to double 239 %double2 = fpext float %float2 to double 240 store volatile double %double1, double *%dst 241 store volatile double %double2, double *%dst 242 ret void 243} 244 245; Check a case where the original displacement is out of range. The backend 246; should force an LAY from the outset. We don't yet do any kind of anchor 247; optimization, so there should be no offset on the LDEB itself. 248define void @f9(double *%dst) { 249; CHECK-NOFP-LABEL: f9: 250; CHECK-NOFP: lay %r1, 12296(%r15) 251; CHECK-NOFP: ldeb {{%f[0-7]}}, 0(%r1) 252; CHECK-NOFP: br %r14 253; 254; CHECK-FP-LABEL: f9: 255; CHECK-FP: lay %r1, 12296(%r11) 256; CHECK-FP: ldeb {{%f[0-7]}}, 0(%r1) 257; CHECK-FP: br %r14 258 %region1 = alloca [2006 x float], align 8 259 %region2 = alloca [2006 x float], align 8 260 %start1 = getelementptr inbounds [2006 x float], [2006 x float]* %region1, i64 0, i64 0 261 %start2 = getelementptr inbounds [2006 x float], [2006 x float]* %region2, i64 0, i64 0 262 call void @foo(float *%start1, float *%start2) 263 %ptr1 = getelementptr inbounds [2006 x float], [2006 x float]* %region1, i64 0, i64 1024 264 %ptr2 = getelementptr inbounds [2006 x float], [2006 x float]* %region2, i64 0, i64 1024 265 %float1 = load float, float *%ptr1 266 %float2 = load float, float *%ptr2 267 %double1 = fpext float %float1 to double 268 %double2 = fpext float %float2 to double 269 store volatile double %double1, double *%dst 270 store volatile double %double2, double *%dst 271 ret void 272} 273 274; Repeat f2 in a case that needs the emergency spill slots, because all 275; call-clobbered and allocated call-saved registers are live. Note that 276; %vptr and %dst are copied to call-saved registers, freeing up %r2 and 277; %r3 during the main test. 278define void @f10(i32 *%vptr, double *%dst) { 279; CHECK-NOFP-LABEL: f10: 280; CHECK-NOFP: stg [[REGISTER:%r[1-9][0-4]?]], [[OFFSET:160|168]](%r15) 281; CHECK-NOFP: lghi [[REGISTER]], 4096 282; CHECK-NOFP: ldeb {{%f[0-7]}}, 0([[REGISTER]],%r15) 283; CHECK-NOFP: lg [[REGISTER]], [[OFFSET]](%r15) 284; CHECK-NOFP: br %r14 285; 286; CHECK-FP-LABEL: f10: 287; CHECK-FP: stg [[REGISTER:%r[1-9][0-4]?]], [[OFFSET:160|168]](%r11) 288; CHECK-FP: lghi [[REGISTER]], 4096 289; CHECK-FP: ldeb {{%f[0-7]}}, 0([[REGISTER]],%r11) 290; CHECK-FP: lg [[REGISTER]], [[OFFSET]](%r11) 291; CHECK-FP: br %r14 292 %region1 = alloca [978 x float], align 8 293 %region2 = alloca [978 x float], align 8 294 %start1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 0 295 %start2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 0 296 call void @foo(float *%start1, float *%start2) 297 %ptr1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 2 298 %ptr2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 2 299 %i0 = load volatile i32, i32 *%vptr 300 %i1 = load volatile i32, i32 *%vptr 301 %i2 = load volatile i32, i32 *%vptr 302 %i3 = load volatile i32, i32 *%vptr 303 %i4 = load volatile i32, i32 *%vptr 304 %i5 = load volatile i32, i32 *%vptr 305 %i14 = load volatile i32, i32 *%vptr 306 %float1 = load float, float *%ptr1 307 %float2 = load float, float *%ptr2 308 %double1 = fpext float %float1 to double 309 %double2 = fpext float %float2 to double 310 store volatile double %double1, double *%dst 311 store volatile double %double2, double *%dst 312 store volatile i32 %i0, i32 *%vptr 313 store volatile i32 %i1, i32 *%vptr 314 store volatile i32 %i2, i32 *%vptr 315 store volatile i32 %i3, i32 *%vptr 316 store volatile i32 %i4, i32 *%vptr 317 store volatile i32 %i5, i32 *%vptr 318 store volatile i32 %i14, i32 *%vptr 319 ret void 320} 321 322; Repeat f2 in a case where the index register is already occupied. 323define void @f11(double *%dst, i64 %index) { 324; CHECK-NOFP-LABEL: f11: 325; CHECK-NOFP: lgr [[REGISTER:%r[1-9][0-5]?]], %r3 326; CHECK-NOFP: lay %r1, 4096(%r15) 327; CHECK-NOFP: ldeb {{%f[0-7]}}, 0([[REGISTER]],%r1) 328; CHECK-NOFP: br %r14 329; 330; CHECK-FP-LABEL: f11: 331; CHECK-FP: lgr [[REGISTER:%r[1-9][0-5]?]], %r3 332; CHECK-FP: lay %r1, 4096(%r11) 333; CHECK-FP: ldeb {{%f[0-7]}}, 0([[REGISTER]],%r1) 334; CHECK-FP: br %r14 335 %region1 = alloca [978 x float], align 8 336 %region2 = alloca [978 x float], align 8 337 %start1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 0 338 %start2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 0 339 call void @foo(float *%start1, float *%start2) 340 %elem1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 2 341 %elem2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 2 342 %base1 = ptrtoint float *%elem1 to i64 343 %base2 = ptrtoint float *%elem2 to i64 344 %addr1 = add i64 %base1, %index 345 %addr2 = add i64 %base2, %index 346 %ptr1 = inttoptr i64 %addr1 to float * 347 %ptr2 = inttoptr i64 %addr2 to float * 348 %float1 = load float, float *%ptr1 349 %float2 = load float, float *%ptr2 350 %double1 = fpext float %float1 to double 351 %double2 = fpext float %float2 to double 352 store volatile double %double1, double *%dst 353 store volatile double %double2, double *%dst 354 ret void 355} 356