1#!/bin/sh
2# install - install a program, script, or datafile
3
4scriptversion=2014-09-12.12; # UTC
5
6# This originates from X11R5 (mit/util/scripts/install.sh), which was
7# later released in X11R6 (xc/config/util/install.sh) with the
8# following copyright and license.
9#
10# Copyright (C) 1994 X Consortium
11#
12# Permission is hereby granted, free of charge, to any person obtaining a copy
13# of this software and associated documentation files (the "Software"), to
14# deal in the Software without restriction, including without limitation the
15# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
16# sell copies of the Software, and to permit persons to whom the Software is
17# furnished to do so, subject to the following conditions:
18#
19# The above copyright notice and this permission notice shall be included in
20# all copies or substantial portions of the Software.
21#
22# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
23# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
24# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
25# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
26# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
27# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
28#
29# Except as contained in this notice, the name of the X Consortium shall not
30# be used in advertising or otherwise to promote the sale, use or other deal-
31# ings in this Software without prior written authorization from the X Consor-
32# tium.
33#
34#
35# FSF changes to this file are in the public domain.
36#
37# Calling this script install-sh is preferred over install.sh, to prevent
38# 'make' implicit rules from creating a file called install from it
39# when there is no Makefile.
40#
41# This script is compatible with the BSD install script, but was written
42# from scratch.
43
44tab='	'
45nl='
46'
47IFS=" $tab$nl"
48
49# Set DOITPROG to "echo" to test this script.
50
51doit=${DOITPROG-}
52doit_exec=${doit:-exec}
53
54# Put in absolute file names if you don't have them in your path;
55# or use environment vars.
56
57chgrpprog=${CHGRPPROG-chgrp}
58chmodprog=${CHMODPROG-chmod}
59chownprog=${CHOWNPROG-chown}
60cmpprog=${CMPPROG-cmp}
61cpprog=${CPPROG-cp}
62mkdirprog=${MKDIRPROG-mkdir}
63mvprog=${MVPROG-mv}
64rmprog=${RMPROG-rm}
65stripprog=${STRIPPROG-strip}
66
67posix_mkdir=
68
69# Desired mode of installed file.
70mode=0755
71
72chgrpcmd=
73chmodcmd=$chmodprog
74chowncmd=
75mvcmd=$mvprog
76rmcmd="$rmprog -f"
77stripcmd=
78
79src=
80dst=
81dir_arg=
82dst_arg=
83
84copy_on_change=false
85is_target_a_directory=possibly
86
87usage="\
88Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
89   or: $0 [OPTION]... SRCFILES... DIRECTORY
90   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
91   or: $0 [OPTION]... -d DIRECTORIES...
92
93In the 1st form, copy SRCFILE to DSTFILE.
94In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
95In the 4th, create DIRECTORIES.
96
97Options:
98     --help     display this help and exit.
99     --version  display version info and exit.
100
101  -c            (ignored)
102  -C            install only if different (preserve the last data modification time)
103  -d            create directories instead of installing files.
104  -g GROUP      $chgrpprog installed files to GROUP.
105  -m MODE       $chmodprog installed files to MODE.
106  -o USER       $chownprog installed files to USER.
107  -s            $stripprog installed files.
108  -t DIRECTORY  install into DIRECTORY.
109  -T            report an error if DSTFILE is a directory.
110
111Environment variables override the default commands:
112  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
113  RMPROG STRIPPROG
114"
115
116while test $# -ne 0; do
117  case $1 in
118    -c) ;;
119
120    -C) copy_on_change=true;;
121
122    -d) dir_arg=true;;
123
124    -g) chgrpcmd="$chgrpprog $2"
125        shift;;
126
127    --help) echo "$usage"; exit $?;;
128
129    -m) mode=$2
130        case $mode in
131          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
132            echo "$0: invalid mode: $mode" >&2
133            exit 1;;
134        esac
135        shift;;
136
137    -o) chowncmd="$chownprog $2"
138        shift;;
139
140    -s) stripcmd=$stripprog;;
141
142    -t)
143        is_target_a_directory=always
144        dst_arg=$2
145        # Protect names problematic for 'test' and other utilities.
146        case $dst_arg in
147          -* | [=\(\)!]) dst_arg=./$dst_arg;;
148        esac
149        shift;;
150
151    -T) is_target_a_directory=never;;
152
153    --version) echo "$0 $scriptversion"; exit $?;;
154
155    --) shift
156        break;;
157
158    -*) echo "$0: invalid option: $1" >&2
159        exit 1;;
160
161    *)  break;;
162  esac
163  shift
164done
165
166# We allow the use of options -d and -T together, by making -d
167# take the precedence; this is for compatibility with GNU install.
168
169if test -n "$dir_arg"; then
170  if test -n "$dst_arg"; then
171    echo "$0: target directory not allowed when installing a directory." >&2
172    exit 1
173  fi
174fi
175
176if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
177  # When -d is used, all remaining arguments are directories to create.
178  # When -t is used, the destination is already specified.
179  # Otherwise, the last argument is the destination.  Remove it from $@.
180  for arg
181  do
182    if test -n "$dst_arg"; then
183      # $@ is not empty: it contains at least $arg.
184      set fnord "$@" "$dst_arg"
185      shift # fnord
186    fi
187    shift # arg
188    dst_arg=$arg
189    # Protect names problematic for 'test' and other utilities.
190    case $dst_arg in
191      -* | [=\(\)!]) dst_arg=./$dst_arg;;
192    esac
193  done
194fi
195
196if test $# -eq 0; then
197  if test -z "$dir_arg"; then
198    echo "$0: no input file specified." >&2
199    exit 1
200  fi
201  # It's OK to call 'install-sh -d' without argument.
202  # This can happen when creating conditional directories.
203  exit 0
204fi
205
206if test -z "$dir_arg"; then
207  if test $# -gt 1 || test "$is_target_a_directory" = always; then
208    if test ! -d "$dst_arg"; then
209      echo "$0: $dst_arg: Is not a directory." >&2
210      exit 1
211    fi
212  fi
213fi
214
215if test -z "$dir_arg"; then
216  do_exit='(exit $ret); exit $ret'
217  trap "ret=129; $do_exit" 1
218  trap "ret=130; $do_exit" 2
219  trap "ret=141; $do_exit" 13
220  trap "ret=143; $do_exit" 15
221
222  # Set umask so as not to create temps with too-generous modes.
223  # However, 'strip' requires both read and write access to temps.
224  case $mode in
225    # Optimize common cases.
226    *644) cp_umask=133;;
227    *755) cp_umask=22;;
228
229    *[0-7])
230      if test -z "$stripcmd"; then
231        u_plus_rw=
232      else
233        u_plus_rw='% 200'
234      fi
235      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
236    *)
237      if test -z "$stripcmd"; then
238        u_plus_rw=
239      else
240        u_plus_rw=,u+rw
241      fi
242      cp_umask=$mode$u_plus_rw;;
243  esac
244fi
245
246for src
247do
248  # Protect names problematic for 'test' and other utilities.
249  case $src in
250    -* | [=\(\)!]) src=./$src;;
251  esac
252
253  if test -n "$dir_arg"; then
254    dst=$src
255    dstdir=$dst
256    test -d "$dstdir"
257    dstdir_status=$?
258  else
259
260    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
261    # might cause directories to be created, which would be especially bad
262    # if $src (and thus $dsttmp) contains '*'.
263    if test ! -f "$src" && test ! -d "$src"; then
264      echo "$0: $src does not exist." >&2
265      exit 1
266    fi
267
268    if test -z "$dst_arg"; then
269      echo "$0: no destination specified." >&2
270      exit 1
271    fi
272    dst=$dst_arg
273
274    # If destination is a directory, append the input filename; won't work
275    # if double slashes aren't ignored.
276    if test -d "$dst"; then
277      if test "$is_target_a_directory" = never; then
278        echo "$0: $dst_arg: Is a directory" >&2
279        exit 1
280      fi
281      dstdir=$dst
282      dst=$dstdir/`basename "$src"`
283      dstdir_status=0
284    else
285      dstdir=`dirname "$dst"`
286      test -d "$dstdir"
287      dstdir_status=$?
288    fi
289  fi
290
291  obsolete_mkdir_used=false
292
293  if test $dstdir_status != 0; then
294    case $posix_mkdir in
295      '')
296        # Create intermediate dirs using mode 755 as modified by the umask.
297        # This is like FreeBSD 'install' as of 1997-10-28.
298        umask=`umask`
299        case $stripcmd.$umask in
300          # Optimize common cases.
301          *[2367][2367]) mkdir_umask=$umask;;
302          .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
303
304          *[0-7])
305            mkdir_umask=`expr $umask + 22 \
306              - $umask % 100 % 40 + $umask % 20 \
307              - $umask % 10 % 4 + $umask % 2
308            `;;
309          *) mkdir_umask=$umask,go-w;;
310        esac
311
312        # With -d, create the new directory with the user-specified mode.
313        # Otherwise, rely on $mkdir_umask.
314        if test -n "$dir_arg"; then
315          mkdir_mode=-m$mode
316        else
317          mkdir_mode=
318        fi
319
320        posix_mkdir=false
321        case $umask in
322          *[123567][0-7][0-7])
323            # POSIX mkdir -p sets u+wx bits regardless of umask, which
324            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
325            ;;
326          *)
327            # $RANDOM is not portable (e.g. dash);  use it when possible to
328            # lower collision chance
329            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
330            trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
331
332            # As "mkdir -p" follows symlinks and we work in /tmp possibly;  so
333            # create the $tmpdir first (and fail if unsuccessful) to make sure
334            # that nobody tries to guess the $tmpdir name.
335            if (umask $mkdir_umask &&
336                $mkdirprog $mkdir_mode "$tmpdir" &&
337                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
338            then
339              if test -z "$dir_arg" || {
340                   # Check for POSIX incompatibilities with -m.
341                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
342                   # other-writable bit of parent directory when it shouldn't.
343                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
344                   test_tmpdir="$tmpdir/a"
345                   ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
346                   case $ls_ld_tmpdir in
347                     d????-?r-*) different_mode=700;;
348                     d????-?--*) different_mode=755;;
349                     *) false;;
350                   esac &&
351                   $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
352                     ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
353                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
354                   }
355                 }
356              then posix_mkdir=:
357              fi
358              rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
359            else
360              # Remove any dirs left behind by ancient mkdir implementations.
361              rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
362            fi
363            trap '' 0;;
364        esac;;
365    esac
366
367    if
368      $posix_mkdir && (
369        umask $mkdir_umask &&
370        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
371      )
372    then :
373    else
374
375      # The umask is ridiculous, or mkdir does not conform to POSIX,
376      # or it failed possibly due to a race condition.  Create the
377      # directory the slow way, step by step, checking for races as we go.
378
379      case $dstdir in
380        /*) prefix='/';;
381        [-=\(\)!]*) prefix='./';;
382        *)  prefix='';;
383      esac
384
385      oIFS=$IFS
386      IFS=/
387      set -f
388      set fnord $dstdir
389      shift
390      set +f
391      IFS=$oIFS
392
393      prefixes=
394
395      for d
396      do
397        test X"$d" = X && continue
398
399        prefix=$prefix$d
400        if test -d "$prefix"; then
401          prefixes=
402        else
403          if $posix_mkdir; then
404            (umask=$mkdir_umask &&
405             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
406            # Don't fail if two instances are running concurrently.
407            test -d "$prefix" || exit 1
408          else
409            case $prefix in
410              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
411              *) qprefix=$prefix;;
412            esac
413            prefixes="$prefixes '$qprefix'"
414          fi
415        fi
416        prefix=$prefix/
417      done
418
419      if test -n "$prefixes"; then
420        # Don't fail if two instances are running concurrently.
421        (umask $mkdir_umask &&
422         eval "\$doit_exec \$mkdirprog $prefixes") ||
423          test -d "$dstdir" || exit 1
424        obsolete_mkdir_used=true
425      fi
426    fi
427  fi
428
429  if test -n "$dir_arg"; then
430    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
431    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
432    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
433      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
434  else
435
436    # Make a couple of temp file names in the proper directory.
437    dsttmp=$dstdir/_inst.$$_
438    rmtmp=$dstdir/_rm.$$_
439
440    # Trap to clean up those temp files at exit.
441    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
442
443    # Copy the file name to the temp name.
444    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
445
446    # and set any options; do chmod last to preserve setuid bits.
447    #
448    # If any of these fail, we abort the whole thing.  If we want to
449    # ignore errors from any of these, just make sure not to ignore
450    # errors from the above "$doit $cpprog $src $dsttmp" command.
451    #
452    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
453    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
454    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
455    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
456
457    # If -C, don't bother to copy if it wouldn't change the file.
458    if $copy_on_change &&
459       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
460       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
461       set -f &&
462       set X $old && old=:$2:$4:$5:$6 &&
463       set X $new && new=:$2:$4:$5:$6 &&
464       set +f &&
465       test "$old" = "$new" &&
466       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
467    then
468      rm -f "$dsttmp"
469    else
470      # Rename the file to the real destination.
471      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
472
473      # The rename failed, perhaps because mv can't rename something else
474      # to itself, or perhaps because mv is so ancient that it does not
475      # support -f.
476      {
477        # Now remove or move aside any old file at destination location.
478        # We try this two ways since rm can't unlink itself on some
479        # systems and the destination file might be busy for other
480        # reasons.  In this case, the final cleanup might fail but the new
481        # file should still install successfully.
482        {
483          test ! -f "$dst" ||
484          $doit $rmcmd -f "$dst" 2>/dev/null ||
485          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
486            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
487          } ||
488          { echo "$0: cannot unlink or rename $dst" >&2
489            (exit 1); exit 1
490          }
491        } &&
492
493        # Now rename the file to the real destination.
494        $doit $mvcmd "$dsttmp" "$dst"
495      }
496    fi || exit 1
497
498    trap '' 0
499  fi
500done
501
502# Local variables:
503# eval: (add-hook 'write-file-hooks 'time-stamp)
504# time-stamp-start: "scriptversion="
505# time-stamp-format: "%:y-%02m-%02d.%02H"
506# time-stamp-time-zone: "UTC"
507# time-stamp-end: "; # UTC"
508# End:
509