1 /*
2  * (C) Copyright 2000
3  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
4  * Marius Groeger <mgroeger@sysgo.de>
5  *
6  * Configuation settings for the implementa impA7 board.
7  *
8  * See file CREDITS for list of people who contributed to this
9  * project.
10  *
11  * This program is free software; you can redistribute it and/or
12  * modify it under the terms of the GNU General Public License as
13  * published by the Free Software Foundation; either version 2 of
14  * the License, or (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  * GNU General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24  * MA 02111-1307 USA
25  */
26 
27 #ifndef __CONFIG_H
28 #define __CONFIG_H
29 
30 /*
31  * High Level Configuration Options
32  * (easy to change)
33  */
34 #define CONFIG_ARM7		1	/* This is a ARM7 CPU	*/
35 #define CONFIG_IMPA7		1	/* on an impA7 Board      */
36 #define CONFIG_ARM_THUMB	1	/* this is an ARM720TDMI */
37 #define CONFIG_ARM7_REVD	1	/* enable ARM720 REV.D Workarounds */
38 
39 #undef CONFIG_USE_IRQ			/* don't need them anymore */
40 
41 /*
42  * Size of malloc() pool
43  */
44 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
45 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
46 
47 /*
48  * Hardware drivers
49  */
50 #define CONFIG_NET_MULTI
51 #define CONFIG_CS8900		/* we have a CS8900 on-board */
52 #define CONFIG_CS8900_BASE	0x20000000
53 #define CONFIG_CS8900_BUS32
54 
55 /*
56  * select serial console configuration
57  */
58 #define CONFIG_CLPS7111_SERIAL
59 #define CONFIG_SERIAL1		1	/* we use Serial line 1 */
60 
61 /* allow to overwrite serial and ethaddr */
62 #define CONFIG_ENV_OVERWRITE
63 
64 #define CONFIG_BAUDRATE		9600
65 
66 /*
67  * BOOTP options
68  */
69 #define CONFIG_BOOTP_SUBNETMASK
70 #define CONFIG_BOOTP_GATEWAY
71 #define CONFIG_BOOTP_HOSTNAME
72 #define CONFIG_BOOTP_BOOTPATH
73 #define CONFIG_BOOTP_BOOTFILESIZE
74 
75 
76 /*
77  * Command line configuration.
78  */
79 #include <config_cmd_default.h>
80 
81 #define CONFIG_CMD_JFFS2
82 
83 
84 #define CONFIG_BOOTDELAY	3
85 #define CONFIG_BOOTARGS		"devfs=mount root=ramfs console=ttyS0,9600"
86 /*#define CONFIG_ETHADDR	08:00:3e:26:0a:5a	*/
87 /*#define CONFIG_NETMASK        255.255.0.0	*/
88 /*#define CONFIG_IPADDR		172.22.2.128	*/
89 /*#define CONFIG_SERVERIP	172.22.2.126	*/
90 /*#define CONFIG_BOOTFILE	"impa7"	*/
91 #define CONFIG_BOOTCOMMAND	"bootp;bootm"
92 
93 #if defined(CONFIG_CMD_KGDB)
94 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
95 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
96 #endif
97 
98 /*
99  * Miscellaneous configurable options
100  */
101 #define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
102 #define	CONFIG_SYS_PROMPT		"impA7 # "		/* Monitor Command Prompt	*/
103 #define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
104 #define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
105 #define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
106 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
107 
108 #define CONFIG_SYS_MEMTEST_START	0xc0400000	/* memtest works on	*/
109 #define CONFIG_SYS_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
110 
111 #define	CONFIG_SYS_LOAD_ADDR		0xc1000000	/* default load address	*/
112 
113 #define	CONFIG_SYS_HZ			2000		/* decrementer freq: 2 kHz */
114 
115 						/* valid baudrates */
116 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
117 
118 /*-----------------------------------------------------------------------
119  * Stack sizes
120  *
121  * The stack sizes are set up in start.S using the settings below
122  */
123 #define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
124 #ifdef CONFIG_USE_IRQ
125 #define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
126 #define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
127 #endif
128 
129 /*-----------------------------------------------------------------------
130  * Physical Memory Map
131  */
132 #define CONFIG_NR_DRAM_BANKS	2	   /* we have 2 banks of DRAM */
133 #define PHYS_SDRAM_1		0xc0000000 /* SDRAM Bank #1 */
134 #define PHYS_SDRAM_1_SIZE	0x00800000 /* 8 MB */
135 #define PHYS_SDRAM_2		0xc1000000 /* SDRAM Bank #2 */
136 #define PHYS_SDRAM_2_SIZE	0x00800000 /* 8 MB */
137 
138 #define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
139 #define PHYS_FLASH_2		0x10000000 /* Flash Bank #2 */
140 #define PHYS_FLASH_SIZE		0x00800000 /* 16 MB */
141 
142 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
143 
144 /*-----------------------------------------------------------------------
145  * FLASH and environment organization
146  */
147 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
148 #define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
149 
150 /* timeout values are in ticks */
151 #define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
152 #define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
153 
154 #define	CONFIG_ENV_IS_IN_FLASH	1
155 #define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x1C000)	/* Addr of Environment Sector	*/
156 #define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
157 
158 /*
159  * JFFS2 partitions
160  *
161  */
162 /* No command line, one static partition, whole device */
163 #undef CONFIG_CMD_MTDPARTS
164 #define CONFIG_JFFS2_DEV		"nor0"
165 #define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
166 #define CONFIG_JFFS2_PART_OFFSET	0x00020000
167 
168 /* mtdparts command line support */
169 /*
170 #define CONFIG_CMD_MTDPARTS
171 #define MTDIDS_DEFAULT		"nor0=impA7 NOR Flash Bank #0,nor1=impA7 NOR Flash Bank #1"
172 #define MTDPARTS_DEFAULT	"mtdparts=impA7 NOR Flash Bank #0:-(FileSystem1);impA7 NOR Flash Bank #1:-(FileSystem2)"
173 */
174 
175 #endif	/* __CONFIG_H */
176