1 /*
2 * Copyright (C) 2017 Michael Brown <mbrown@fensystems.co.uk>.
3 *
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License as
6 * published by the Free Software Foundation; either version 2 of the
7 * License, or (at your option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 * General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
17 * 02110-1301, USA.
18 *
19 * You can also choose to distribute this program under the terms of
20 * the Unmodified Binary Distribution Licence (as given in the file
21 * COPYING.UBDL), provided that you have satisfied its requirements.
22 */
23
24 FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
25
26 #include <stdint.h>
27 #include <string.h>
28 #include <strings.h>
29 #include <unistd.h>
30 #include <errno.h>
31 #include <byteswap.h>
32 #include <ipxe/netdevice.h>
33 #include <ipxe/ethernet.h>
34 #include <ipxe/if_ether.h>
35 #include <ipxe/iobuf.h>
36 #include <ipxe/malloc.h>
37 #include <ipxe/umalloc.h>
38 #include <ipxe/pci.h>
39 #include "exanic.h"
40
41 /** @file
42 *
43 * Exablaze ExaNIC driver
44 *
45 */
46
47 /* Disambiguate the various error causes */
48 #define EIO_ABORTED __einfo_error ( EINFO_EIO_ABORTED )
49 #define EINFO_EIO_ABORTED \
50 __einfo_uniqify ( EINFO_EIO, 0x01, "Frame aborted" )
51 #define EIO_CORRUPT __einfo_error ( EINFO_EIO_CORRUPT )
52 #define EINFO_EIO_CORRUPT \
53 __einfo_uniqify ( EINFO_EIO, 0x02, "CRC incorrect" )
54 #define EIO_HWOVFL __einfo_error ( EINFO_EIO_HWOVFL )
55 #define EINFO_EIO_HWOVFL \
56 __einfo_uniqify ( EINFO_EIO, 0x03, "Hardware overflow" )
57 #define EIO_STATUS( status ) \
58 EUNIQ ( EINFO_EIO, ( (status) & EXANIC_STATUS_ERROR_MASK ), \
59 EIO_ABORTED, EIO_CORRUPT, EIO_HWOVFL )
60
61 /**
62 * Write DMA base address register
63 *
64 * @v addr DMA base address
65 * @v reg Register
66 */
exanic_write_base(physaddr_t addr,void * reg)67 static void exanic_write_base ( physaddr_t addr, void *reg ) {
68 uint32_t lo;
69 uint32_t hi;
70
71 /* Write high and low registers, setting flags as appropriate */
72 lo = addr;
73 if ( sizeof ( physaddr_t ) > sizeof ( uint32_t ) ) {
74 /* 64-bit build; may be a 32-bit or 64-bit address */
75 hi = ( ( ( uint64_t ) addr ) >> 32 );
76 if ( ! hi )
77 lo |= EXANIC_DMA_32_BIT;
78 } else {
79 /* 32-bit build; always a 32-bit address */
80 hi = 0;
81 lo |= EXANIC_DMA_32_BIT;
82 }
83 writel ( hi, ( reg + 0 ) );
84 writel ( lo, ( reg + 4 ) );
85 }
86
87 /**
88 * Clear DMA base address register
89 *
90 * @v reg Register
91 */
exanic_clear_base(void * reg)92 static inline void exanic_clear_base ( void *reg ) {
93
94 /* Clear both high and low registers */
95 writel ( 0, ( reg + 0 ) );
96 writel ( 0, ( reg + 4 ) );
97 }
98
99 /******************************************************************************
100 *
101 * Device reset
102 *
103 ******************************************************************************
104 */
105
106 /**
107 * Reset hardware
108 *
109 * @v exanic ExaNIC device
110 */
exanic_reset(struct exanic * exanic)111 static void exanic_reset ( struct exanic *exanic ) {
112 void *port_regs;
113 unsigned int i;
114
115 /* Disable all possible ports */
116 for ( i = 0 ; i < EXANIC_MAX_PORTS ; i++ ) {
117 port_regs = ( exanic->regs + EXANIC_PORT_REGS ( i ) );
118 writel ( 0, ( port_regs + EXANIC_PORT_ENABLE ) );
119 writel ( 0, ( port_regs + EXANIC_PORT_IRQ ) );
120 exanic_clear_base ( port_regs + EXANIC_PORT_RX_BASE );
121 }
122
123 /* Disable transmit feedback */
124 exanic_clear_base ( exanic->regs + EXANIC_TXF_BASE );
125 }
126
127 /******************************************************************************
128 *
129 * MAC address
130 *
131 ******************************************************************************
132 */
133
134 /**
135 * Read I2C line status
136 *
137 * @v basher Bit-bashing interface
138 * @v bit_id Bit number
139 * @ret zero Input is a logic 0
140 * @ret non-zero Input is a logic 1
141 */
exanic_i2c_read_bit(struct bit_basher * basher,unsigned int bit_id)142 static int exanic_i2c_read_bit ( struct bit_basher *basher,
143 unsigned int bit_id ) {
144 struct exanic *exanic =
145 container_of ( basher, struct exanic, basher.basher );
146 unsigned int shift;
147 uint32_t i2c;
148
149 /* Identify bit */
150 assert ( bit_id == I2C_BIT_SDA );
151 shift = exanic->i2cfg.getsda;
152
153 /* Read I2C register */
154 DBG_DISABLE ( DBGLVL_IO );
155 i2c = readl ( exanic->regs + EXANIC_I2C );
156 DBG_ENABLE ( DBGLVL_IO );
157 return ( ( i2c >> shift ) & 1 );
158 }
159
160 /**
161 * Write I2C line status
162 *
163 * @v basher Bit-bashing interface
164 * @v bit_id Bit number
165 * @v data Value to write
166 */
exanic_i2c_write_bit(struct bit_basher * basher,unsigned int bit_id,unsigned long data)167 static void exanic_i2c_write_bit ( struct bit_basher *basher,
168 unsigned int bit_id, unsigned long data ) {
169 struct exanic *exanic =
170 container_of ( basher, struct exanic, basher.basher );
171 unsigned int shift;
172 uint32_t mask;
173 uint32_t i2c;
174
175 /* Identify shift */
176 assert ( ( bit_id == I2C_BIT_SCL ) || ( bit_id == I2C_BIT_SDA ) );
177 shift = ( ( bit_id == I2C_BIT_SCL ) ?
178 exanic->i2cfg.setscl : exanic->i2cfg.setsda );
179 mask = ( 1UL << shift );
180
181 /* Modify I2C register */
182 DBG_DISABLE ( DBGLVL_IO );
183 i2c = readl ( exanic->regs + EXANIC_I2C );
184 i2c &= ~mask;
185 if ( ! data )
186 i2c |= mask;
187 writel ( i2c, ( exanic->regs + EXANIC_I2C ) );
188 DBG_ENABLE ( DBGLVL_IO );
189 }
190
191 /** I2C bit-bashing interface operations */
192 static struct bit_basher_operations exanic_i2c_basher_ops = {
193 .read = exanic_i2c_read_bit,
194 .write = exanic_i2c_write_bit,
195 };
196
197 /** Possible I2C bus configurations */
198 static struct exanic_i2c_config exanic_i2cfgs[] = {
199 /* X2/X10 */
200 { .setscl = 7, .setsda = 4, .getsda = 12 },
201 /* X4 */
202 { .setscl = 7, .setsda = 5, .getsda = 13 },
203 };
204
205 /**
206 * Initialise EEPROM
207 *
208 * @v exanic ExaNIC device
209 * @v i2cfg I2C bus configuration
210 * @ret rc Return status code
211 */
exanic_try_init_eeprom(struct exanic * exanic,struct exanic_i2c_config * i2cfg)212 static int exanic_try_init_eeprom ( struct exanic *exanic,
213 struct exanic_i2c_config *i2cfg ) {
214 int rc;
215
216 /* Configure I2C bus */
217 memcpy ( &exanic->i2cfg, i2cfg, sizeof ( exanic->i2cfg ) );
218
219 /* Initialise I2C bus */
220 if ( ( rc = init_i2c_bit_basher ( &exanic->basher,
221 &exanic_i2c_basher_ops ) ) != 0 ) {
222 DBGC2 ( exanic, "EXANIC %p found no I2C bus via %d/%d/%d\n",
223 exanic, exanic->i2cfg.setscl,
224 exanic->i2cfg.setsda, exanic->i2cfg.getsda );
225 return rc;
226 }
227
228 /* Check for EEPROM presence */
229 init_i2c_eeprom ( &exanic->eeprom, EXANIC_EEPROM_ADDRESS );
230 if ( ( rc = i2c_check_presence ( &exanic->basher.i2c,
231 &exanic->eeprom ) ) != 0 ) {
232 DBGC2 ( exanic, "EXANIC %p found no EEPROM via %d/%d/%d\n",
233 exanic, exanic->i2cfg.setscl,
234 exanic->i2cfg.setsda, exanic->i2cfg.getsda );
235 return rc;
236 }
237
238 DBGC ( exanic, "EXANIC %p found EEPROM via %d/%d/%d\n",
239 exanic, exanic->i2cfg.setscl,
240 exanic->i2cfg.setsda, exanic->i2cfg.getsda );
241 return 0;
242 }
243
244 /**
245 * Initialise EEPROM
246 *
247 * @v exanic ExaNIC device
248 * @ret rc Return status code
249 */
exanic_init_eeprom(struct exanic * exanic)250 static int exanic_init_eeprom ( struct exanic *exanic ) {
251 struct exanic_i2c_config *i2cfg;
252 unsigned int i;
253 int rc;
254
255 /* Try all possible bus configurations */
256 for ( i = 0 ; i < ( sizeof ( exanic_i2cfgs ) /
257 sizeof ( exanic_i2cfgs[0] ) ) ; i++ ) {
258 i2cfg = &exanic_i2cfgs[i];
259 if ( ( rc = exanic_try_init_eeprom ( exanic, i2cfg ) ) == 0 )
260 return 0;
261 }
262
263 DBGC ( exanic, "EXANIC %p found no EEPROM\n", exanic );
264 return -ENODEV;
265 }
266
267 /**
268 * Fetch base MAC address
269 *
270 * @v exanic ExaNIC device
271 * @ret rc Return status code
272 */
exanic_fetch_mac(struct exanic * exanic)273 static int exanic_fetch_mac ( struct exanic *exanic ) {
274 struct i2c_interface *i2c = &exanic->basher.i2c;
275 int rc;
276
277 /* Initialise EEPROM */
278 if ( ( rc = exanic_init_eeprom ( exanic ) ) != 0 )
279 return rc;
280
281 /* Fetch base MAC address */
282 if ( ( rc = i2c->read ( i2c, &exanic->eeprom, 0, exanic->mac,
283 sizeof ( exanic->mac ) ) ) != 0 ) {
284 DBGC ( exanic, "EXANIC %p could not read MAC address: %s\n",
285 exanic, strerror ( rc ) );
286 return rc;
287 }
288
289 return 0;
290 }
291
292 /******************************************************************************
293 *
294 * Link state
295 *
296 ******************************************************************************
297 */
298
299 /**
300 * Check link state
301 *
302 * @v netdev Network device
303 */
exanic_check_link(struct net_device * netdev)304 static void exanic_check_link ( struct net_device *netdev ) {
305 struct exanic_port *port = netdev->priv;
306 uint32_t status;
307 uint32_t speed;
308
309 /* Report port status changes */
310 status = readl ( port->regs + EXANIC_PORT_STATUS );
311 speed = readl ( port->regs + EXANIC_PORT_SPEED );
312 if ( status != port->status ) {
313 DBGC ( port, "EXANIC %s port status %#08x speed %dMbps\n",
314 netdev->name, status, speed );
315 if ( status & EXANIC_PORT_STATUS_LINK ) {
316 netdev_link_up ( netdev );
317 } else {
318 netdev_link_down ( netdev );
319 }
320 port->status = status;
321 }
322 }
323
324 /**
325 * Check link state periodically
326 *
327 * @v retry Link state check timer
328 * @v over Failure indicator
329 */
exanic_expired(struct retry_timer * timer,int over __unused)330 static void exanic_expired ( struct retry_timer *timer, int over __unused ) {
331 struct exanic_port *port =
332 container_of ( timer, struct exanic_port, timer );
333 struct net_device *netdev = port->netdev;
334 static const uint32_t speeds[] = {
335 100, 1000, 10000, 40000, 100000,
336 };
337 unsigned int index;
338
339 /* Restart timer */
340 start_timer_fixed ( timer, EXANIC_LINK_INTERVAL );
341
342 /* Check link state */
343 exanic_check_link ( netdev );
344
345 /* Do nothing further if link is already up */
346 if ( netdev_link_ok ( netdev ) )
347 return;
348
349 /* Do nothing further unless we have a valid list of supported speeds */
350 if ( ! port->speeds )
351 return;
352
353 /* Autonegotiation is not supported; try manually selecting
354 * the next supported link speed.
355 */
356 do {
357 if ( ! port->speed )
358 port->speed = ( 8 * sizeof ( port->speeds ) );
359 port->speed--;
360 } while ( ! ( ( 1UL << port->speed ) & port->speeds ) );
361 index = ( port->speed - ( ffs ( EXANIC_CAPS_SPEED_MASK ) - 1 ) );
362 assert ( index < ( sizeof ( speeds ) / sizeof ( speeds[0] ) ) );
363
364 /* Attempt the selected speed */
365 DBGC ( netdev, "EXANIC %s attempting %dMbps\n",
366 netdev->name, speeds[index] );
367 writel ( speeds[index], ( port->regs + EXANIC_PORT_SPEED ) );
368 }
369
370 /******************************************************************************
371 *
372 * Network device interface
373 *
374 ******************************************************************************
375 */
376
377 /**
378 * Open network device
379 *
380 * @v netdev Network device
381 * @ret rc Return status code
382 */
exanic_open(struct net_device * netdev)383 static int exanic_open ( struct net_device *netdev ) {
384 struct exanic_port *port = netdev->priv;
385 struct exanic_tx_chunk *tx;
386 unsigned int i;
387
388 /* Reset transmit region contents */
389 for ( i = 0 ; i < port->tx_count ; i++ ) {
390 tx = ( port->tx + ( i * sizeof ( *tx ) ) );
391 writew ( port->txf_slot, &tx->desc.txf_slot );
392 writeb ( EXANIC_TYPE_RAW, &tx->desc.type );
393 writeb ( 0, &tx->desc.flags );
394 writew ( 0, &tx->pad );
395 }
396
397 /* Reset receive region contents */
398 memset_user ( port->rx, 0, 0xff, EXANIC_RX_LEN );
399
400 /* Reset transmit feedback region */
401 *(port->txf) = 0;
402
403 /* Reset counters */
404 port->tx_prod = 0;
405 port->tx_cons = 0;
406 port->rx_cons = 0;
407
408 /* Map receive region */
409 exanic_write_base ( phys_to_bus ( user_to_phys ( port->rx, 0 ) ),
410 ( port->regs + EXANIC_PORT_RX_BASE ) );
411
412 /* Enable promiscuous mode */
413 writel ( EXANIC_PORT_FLAGS_PROMISC,
414 ( port->regs + EXANIC_PORT_FLAGS ) );
415
416 /* Reset to default speed and clear cached status */
417 writel ( port->default_speed, ( port->regs + EXANIC_PORT_SPEED ) );
418 port->speed = 0;
419 port->status = 0;
420
421 /* Enable port */
422 wmb();
423 writel ( EXANIC_PORT_ENABLE_ENABLED,
424 ( port->regs + EXANIC_PORT_ENABLE ) );
425
426 /* Start link state timer */
427 start_timer_fixed ( &port->timer, EXANIC_LINK_INTERVAL );
428
429 return 0;
430 }
431
432 /**
433 * Close network device
434 *
435 * @v netdev Network device
436 */
exanic_close(struct net_device * netdev)437 static void exanic_close ( struct net_device *netdev ) {
438 struct exanic_port *port = netdev->priv;
439
440 /* Stop link state timer */
441 stop_timer ( &port->timer );
442
443 /* Disable port */
444 writel ( 0, ( port->regs + EXANIC_PORT_ENABLE ) );
445 wmb();
446
447 /* Clear receive region */
448 exanic_clear_base ( port->regs + EXANIC_PORT_RX_BASE );
449
450 /* Discard any in-progress receive */
451 if ( port->rx_iobuf ) {
452 netdev_rx_err ( netdev, port->rx_iobuf, -ECANCELED );
453 port->rx_iobuf = NULL;
454 }
455 }
456
457 /**
458 * Transmit packet
459 *
460 * @v netdev Network device
461 * @v iobuf I/O buffer
462 * @ret rc Return status code
463 */
exanic_transmit(struct net_device * netdev,struct io_buffer * iobuf)464 static int exanic_transmit ( struct net_device *netdev,
465 struct io_buffer *iobuf ) {
466 struct exanic_port *port = netdev->priv;
467 struct exanic_tx_chunk *tx;
468 unsigned int tx_fill;
469 unsigned int tx_index;
470 size_t offset;
471 size_t len;
472 uint8_t *src;
473 uint8_t *dst;
474
475 /* Sanity check */
476 len = iob_len ( iobuf );
477 if ( len > sizeof ( tx->data ) ) {
478 DBGC ( port, "EXANIC %s transmit too large\n", netdev->name );
479 return -ENOTSUP;
480 }
481
482 /* Get next transmit descriptor */
483 tx_fill = ( port->tx_prod - port->tx_cons );
484 if ( tx_fill >= port->tx_count ) {
485 DBGC ( port, "EXANIC %s out of transmit descriptors\n",
486 netdev->name );
487 return -ENOBUFS;
488 }
489 tx_index = ( port->tx_prod & ( port->tx_count - 1 ) );
490 offset = ( tx_index * sizeof ( *tx ) );
491 tx = ( port->tx + offset );
492 DBGC2 ( port, "EXANIC %s TX %04x at [%05zx,%05zx)\n",
493 netdev->name, port->tx_prod, ( port->tx_offset + offset ),
494 ( port->tx_offset + offset +
495 offsetof ( typeof ( *tx ), data ) + len ) );
496 port->tx_prod++;
497
498 /* Populate transmit descriptor */
499 writew ( port->tx_prod, &tx->desc.txf_id );
500 writew ( ( sizeof ( tx->pad ) + len ), &tx->desc.len );
501
502 /* Copy data to transmit region. There is no DMA on the
503 * transmit data path.
504 */
505 src = iobuf->data;
506 dst = tx->data;
507 while ( len-- )
508 writeb ( *(src++), dst++ );
509
510 /* Send transmit command */
511 wmb();
512 writel ( ( port->tx_offset + offset ),
513 ( port->regs + EXANIC_PORT_TX_COMMAND ) );
514
515 return 0;
516 }
517
518 /**
519 * Poll for completed packets
520 *
521 * @v netdev Network device
522 */
exanic_poll_tx(struct net_device * netdev)523 static void exanic_poll_tx ( struct net_device *netdev ) {
524 struct exanic_port *port = netdev->priv;
525
526 /* Report any completed packets */
527 while ( port->tx_cons != *(port->txf) ) {
528 DBGC2 ( port, "EXANIC %s TX %04x complete\n",
529 netdev->name, port->tx_cons );
530 netdev_tx_complete_next ( netdev );
531 port->tx_cons++;
532 }
533 }
534
535 /**
536 * Poll for received packets
537 *
538 * @v netdev Network device
539 */
exanic_poll_rx(struct net_device * netdev)540 static void exanic_poll_rx ( struct net_device *netdev ) {
541 struct exanic_port *port = netdev->priv;
542 struct exanic_rx_chunk *rx;
543 struct exanic_rx_descriptor desc;
544 uint8_t current;
545 uint8_t previous;
546 size_t offset;
547 size_t len;
548
549 for ( ; ; port->rx_cons++ ) {
550
551 /* Fetch descriptor */
552 offset = ( ( port->rx_cons * sizeof ( *rx ) ) % EXANIC_RX_LEN );
553 copy_from_user ( &desc, port->rx,
554 ( offset + offsetof ( typeof ( *rx ), desc ) ),
555 sizeof ( desc ) );
556
557 /* Calculate generation */
558 current = ( port->rx_cons / ( EXANIC_RX_LEN / sizeof ( *rx ) ));
559 previous = ( current - 1 );
560
561 /* Do nothing if no chunk is ready */
562 if ( desc.generation == previous )
563 break;
564
565 /* Allocate I/O buffer if needed */
566 if ( ! port->rx_iobuf ) {
567 port->rx_iobuf = alloc_iob ( EXANIC_MAX_RX_LEN );
568 if ( ! port->rx_iobuf ) {
569 /* Wait for next poll */
570 break;
571 }
572 port->rx_rc = 0;
573 }
574
575 /* Calculate chunk length */
576 len = ( desc.len ? desc.len : sizeof ( rx->data ) );
577
578 /* Append data to I/O buffer */
579 if ( len <= iob_tailroom ( port->rx_iobuf ) ) {
580 copy_from_user ( iob_put ( port->rx_iobuf, len ),
581 port->rx,
582 ( offset + offsetof ( typeof ( *rx ),
583 data ) ), len );
584 } else {
585 DBGC ( port, "EXANIC %s RX too large\n",
586 netdev->name );
587 port->rx_rc = -ERANGE;
588 }
589
590 /* Check for overrun */
591 rmb();
592 copy_from_user ( &desc.generation, port->rx,
593 ( offset + offsetof ( typeof ( *rx ),
594 desc.generation ) ),
595 sizeof ( desc.generation ) );
596 if ( desc.generation != current ) {
597 DBGC ( port, "EXANIC %s RX overrun\n", netdev->name );
598 port->rx_rc = -ENOBUFS;
599 continue;
600 }
601
602 /* Wait for end of packet */
603 if ( ! desc.len )
604 continue;
605
606 /* Check for receive errors */
607 if ( desc.status & EXANIC_STATUS_ERROR_MASK ) {
608 port->rx_rc = -EIO_STATUS ( desc.status );
609 DBGC ( port, "EXANIC %s RX %04x error: %s\n",
610 netdev->name, port->rx_cons,
611 strerror ( port->rx_rc ) );
612 } else {
613 DBGC2 ( port, "EXANIC %s RX %04x\n",
614 netdev->name, port->rx_cons );
615 }
616
617 /* Hand off to network stack */
618 if ( port->rx_rc ) {
619 netdev_rx_err ( netdev, port->rx_iobuf, port->rx_rc );
620 } else {
621 iob_unput ( port->rx_iobuf, 4 /* strip CRC */ );
622 netdev_rx ( netdev, port->rx_iobuf );
623 }
624 port->rx_iobuf = NULL;
625 }
626 }
627
628 /**
629 * Poll for completed and received packets
630 *
631 * @v netdev Network device
632 */
exanic_poll(struct net_device * netdev)633 static void exanic_poll ( struct net_device *netdev ) {
634
635 /* Poll for completed packets */
636 exanic_poll_tx ( netdev );
637
638 /* Poll for received packets */
639 exanic_poll_rx ( netdev );
640 }
641
642 /** ExaNIC network device operations */
643 static struct net_device_operations exanic_operations = {
644 .open = exanic_open,
645 .close = exanic_close,
646 .transmit = exanic_transmit,
647 .poll = exanic_poll,
648 };
649
650 /******************************************************************************
651 *
652 * PCI interface
653 *
654 ******************************************************************************
655 */
656
657 /**
658 * Probe port
659 *
660 * @v exanic ExaNIC device
661 * @v dev Parent device
662 * @v index Port number
663 * @ret rc Return status code
664 */
exanic_probe_port(struct exanic * exanic,struct device * dev,unsigned int index)665 static int exanic_probe_port ( struct exanic *exanic, struct device *dev,
666 unsigned int index ) {
667 struct net_device *netdev;
668 struct exanic_port *port;
669 void *port_regs;
670 uint32_t status;
671 size_t tx_len;
672 int rc;
673
674 /* Do nothing if port is not physically present */
675 port_regs = ( exanic->regs + EXANIC_PORT_REGS ( index ) );
676 status = readl ( port_regs + EXANIC_PORT_STATUS );
677 tx_len = readl ( port_regs + EXANIC_PORT_TX_LEN );
678 if ( ( status & EXANIC_PORT_STATUS_ABSENT ) || ( tx_len == 0 ) ) {
679 rc = 0;
680 goto absent;
681 }
682
683 /* Allocate network device */
684 netdev = alloc_etherdev ( sizeof ( *port ) );
685 if ( ! netdev ) {
686 rc = -ENOMEM;
687 goto err_alloc_netdev;
688 }
689 netdev_init ( netdev, &exanic_operations );
690 netdev->dev = dev;
691 port = netdev->priv;
692 memset ( port, 0, sizeof ( *port ) );
693 exanic->port[index] = port;
694 port->netdev = netdev;
695 port->regs = port_regs;
696 timer_init ( &port->timer, exanic_expired, &netdev->refcnt );
697
698 /* Identify transmit region */
699 port->tx_offset = readl ( port->regs + EXANIC_PORT_TX_OFFSET );
700 if ( tx_len > EXANIC_MAX_TX_LEN )
701 tx_len = EXANIC_MAX_TX_LEN;
702 assert ( ! ( tx_len & ( tx_len - 1 ) ) );
703 port->tx = ( exanic->tx + port->tx_offset );
704 port->tx_count = ( tx_len / sizeof ( struct exanic_tx_chunk ) );
705
706 /* Identify transmit feedback region */
707 port->txf_slot = EXANIC_TXF_SLOT ( index );
708 port->txf = ( exanic->txf +
709 ( port->txf_slot * sizeof ( *(port->txf) ) ) );
710
711 /* Allocate receive region (via umalloc()) */
712 port->rx = umalloc ( EXANIC_RX_LEN );
713 if ( ! port->rx ) {
714 rc = -ENOMEM;
715 goto err_alloc_rx;
716 }
717
718 /* Set MAC address */
719 memcpy ( netdev->hw_addr, exanic->mac, ETH_ALEN );
720 netdev->hw_addr[ ETH_ALEN - 1 ] += index;
721
722 /* Record default link speed and supported speeds */
723 port->default_speed = readl ( port->regs + EXANIC_PORT_SPEED );
724 port->speeds = ( exanic->caps & EXANIC_CAPS_SPEED_MASK );
725
726 /* Register network device */
727 if ( ( rc = register_netdev ( netdev ) ) != 0 )
728 goto err_register_netdev;
729 DBGC ( port, "EXANIC %s port %d TX [%#05zx,%#05zx) TXF %#02x RX "
730 "[%#lx,%#lx)\n", netdev->name, index, port->tx_offset,
731 ( port->tx_offset + tx_len ), port->txf_slot,
732 user_to_phys ( port->rx, 0 ),
733 user_to_phys ( port->rx, EXANIC_RX_LEN ) );
734
735 /* Set initial link state */
736 exanic_check_link ( netdev );
737
738 return 0;
739
740 unregister_netdev ( netdev );
741 err_register_netdev:
742 ufree ( port->rx );
743 err_alloc_rx:
744 netdev_nullify ( netdev );
745 netdev_put ( netdev );
746 err_alloc_netdev:
747 absent:
748 return rc;
749 }
750
751 /**
752 * Probe port
753 *
754 * @v exanic ExaNIC device
755 * @v index Port number
756 */
exanic_remove_port(struct exanic * exanic,unsigned int index)757 static void exanic_remove_port ( struct exanic *exanic, unsigned int index ) {
758 struct exanic_port *port;
759
760 /* Do nothing if port is not physically present */
761 port = exanic->port[index];
762 if ( ! port )
763 return;
764
765 /* Unregister network device */
766 unregister_netdev ( port->netdev );
767
768 /* Free receive region */
769 ufree ( port->rx );
770
771 /* Free network device */
772 netdev_nullify ( port->netdev );
773 netdev_put ( port->netdev );
774 }
775
776 /**
777 * Probe PCI device
778 *
779 * @v pci PCI device
780 * @ret rc Return status code
781 */
exanic_probe(struct pci_device * pci)782 static int exanic_probe ( struct pci_device *pci ) {
783 struct exanic *exanic;
784 unsigned long regs_bar_start;
785 unsigned long tx_bar_start;
786 size_t tx_bar_len;
787 int i;
788 int rc;
789
790 /* Allocate and initialise structure */
791 exanic = zalloc ( sizeof ( *exanic ) );
792 if ( ! exanic ) {
793 rc = -ENOMEM;
794 goto err_alloc;
795 }
796 pci_set_drvdata ( pci, exanic );
797
798 /* Fix up PCI device */
799 adjust_pci_device ( pci );
800
801 /* Map registers */
802 regs_bar_start = pci_bar_start ( pci, EXANIC_REGS_BAR );
803 exanic->regs = ioremap ( regs_bar_start, EXANIC_REGS_LEN );
804 if ( ! exanic->regs ) {
805 rc = -ENODEV;
806 goto err_ioremap_regs;
807 }
808
809 /* Reset device */
810 exanic_reset ( exanic );
811
812 /* Read capabilities */
813 exanic->caps = readl ( exanic->regs + EXANIC_CAPS );
814
815 /* Fetch base MAC address */
816 if ( ( rc = exanic_fetch_mac ( exanic ) ) != 0 )
817 goto err_fetch_mac;
818 DBGC ( exanic, "EXANIC %p capabilities %#08x base MAC %s\n",
819 exanic, exanic->caps, eth_ntoa ( exanic->mac ) );
820
821 /* Map transmit region */
822 tx_bar_start = pci_bar_start ( pci, EXANIC_TX_BAR );
823 tx_bar_len = pci_bar_size ( pci, EXANIC_TX_BAR );
824 exanic->tx = ioremap ( tx_bar_start, tx_bar_len );
825 if ( ! exanic->tx ) {
826 rc = -ENODEV;
827 goto err_ioremap_tx;
828 }
829
830 /* Allocate transmit feedback region (shared between all ports) */
831 exanic->txf = malloc_dma ( EXANIC_TXF_LEN, EXANIC_ALIGN );
832 if ( ! exanic->txf ) {
833 rc = -ENOMEM;
834 goto err_alloc_txf;
835 }
836 memset ( exanic->txf, 0, EXANIC_TXF_LEN );
837 exanic_write_base ( virt_to_bus ( exanic->txf ),
838 ( exanic->regs + EXANIC_TXF_BASE ) );
839
840 /* Allocate and initialise per-port network devices */
841 for ( i = 0 ; i < EXANIC_MAX_PORTS ; i++ ) {
842 if ( ( rc = exanic_probe_port ( exanic, &pci->dev, i ) ) != 0 )
843 goto err_probe_port;
844 }
845
846 return 0;
847
848 i = EXANIC_MAX_PORTS;
849 err_probe_port:
850 for ( i-- ; i >= 0 ; i-- )
851 exanic_remove_port ( exanic, i );
852 exanic_reset ( exanic );
853 free_dma ( exanic->txf, EXANIC_TXF_LEN );
854 err_alloc_txf:
855 iounmap ( exanic->tx );
856 err_ioremap_tx:
857 iounmap ( exanic->regs );
858 err_fetch_mac:
859 err_ioremap_regs:
860 free ( exanic );
861 err_alloc:
862 return rc;
863 }
864
865 /**
866 * Remove PCI device
867 *
868 * @v pci PCI device
869 */
exanic_remove(struct pci_device * pci)870 static void exanic_remove ( struct pci_device *pci ) {
871 struct exanic *exanic = pci_get_drvdata ( pci );
872 unsigned int i;
873
874 /* Remove all ports */
875 for ( i = 0 ; i < EXANIC_MAX_PORTS ; i++ )
876 exanic_remove_port ( exanic, i );
877
878 /* Reset device */
879 exanic_reset ( exanic );
880
881 /* Free transmit feedback region */
882 free_dma ( exanic->txf, EXANIC_TXF_LEN );
883
884 /* Unmap transmit region */
885 iounmap ( exanic->tx );
886
887 /* Unmap registers */
888 iounmap ( exanic->regs );
889
890 /* Free device */
891 free ( exanic );
892 }
893
894 /** ExaNIC PCI device IDs */
895 static struct pci_device_id exanic_ids[] = {
896 PCI_ROM ( 0x10ee, 0x2b00, "exanic-old", "ExaNIC (old)", 0 ),
897 PCI_ROM ( 0x1ce4, 0x0001, "exanic-x4", "ExaNIC X4", 0 ),
898 PCI_ROM ( 0x1ce4, 0x0002, "exanic-x2", "ExaNIC X2", 0 ),
899 PCI_ROM ( 0x1ce4, 0x0003, "exanic-x10", "ExaNIC X10", 0 ),
900 PCI_ROM ( 0x1ce4, 0x0004, "exanic-x10gm", "ExaNIC X10 GM", 0 ),
901 PCI_ROM ( 0x1ce4, 0x0005, "exanic-x40", "ExaNIC X40", 0 ),
902 PCI_ROM ( 0x1ce4, 0x0006, "exanic-x10hpt", "ExaNIC X10 HPT", 0 ),
903 };
904
905 /** ExaNIC PCI driver */
906 struct pci_driver exanic_driver __pci_driver = {
907 .ids = exanic_ids,
908 .id_count = ( sizeof ( exanic_ids ) / sizeof ( exanic_ids[0] ) ),
909 .probe = exanic_probe,
910 .remove = exanic_remove,
911 };
912