1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2007 Freescale Semiconductor, Inc. 4 * Kevin Lam <kevin.lam@freescale.com> 5 * Joe D'Abbraccio <joe.d'abbraccio@freescale.com> 6 */ 7 8 #ifndef __CONFIG_H 9 #define __CONFIG_H 10 11 /* 12 * High Level Configuration Options 13 */ 14 #define CONFIG_E300 1 /* E300 family */ 15 #define CONFIG_MPC837x 1 /* MPC837x CPU specific */ 16 #define CONFIG_MPC837XERDB 1 17 18 #define CONFIG_HWCONFIG 19 20 /* 21 * On-board devices 22 */ 23 #define CONFIG_VSC7385_ENET 24 25 /* 26 * System Clock Setup 27 */ 28 #ifdef CONFIG_PCISLAVE 29 #define CONFIG_83XX_PCICLK 66666667 /* in HZ */ 30 #else 31 #define CONFIG_83XX_CLKIN 66666667 /* in Hz */ 32 #define CONFIG_PCIE 33 #endif 34 35 #ifndef CONFIG_SYS_CLK_FREQ 36 #define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN 37 #endif 38 39 /* 40 * Hardware Reset Configuration Word 41 */ 42 #define CONFIG_SYS_HRCW_LOW (\ 43 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 44 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 45 HRCWL_SVCOD_DIV_2 |\ 46 HRCWL_CSB_TO_CLKIN_5X1 |\ 47 HRCWL_CORE_TO_CSB_2X1) 48 49 #ifdef CONFIG_PCISLAVE 50 #define CONFIG_SYS_HRCW_HIGH (\ 51 HRCWH_PCI_AGENT |\ 52 HRCWH_PCI1_ARBITER_DISABLE |\ 53 HRCWH_CORE_ENABLE |\ 54 HRCWH_FROM_0XFFF00100 |\ 55 HRCWH_BOOTSEQ_DISABLE |\ 56 HRCWH_SW_WATCHDOG_DISABLE |\ 57 HRCWH_ROM_LOC_LOCAL_16BIT |\ 58 HRCWH_RL_EXT_LEGACY |\ 59 HRCWH_TSEC1M_IN_RGMII |\ 60 HRCWH_TSEC2M_IN_RGMII |\ 61 HRCWH_BIG_ENDIAN |\ 62 HRCWH_LDP_CLEAR) 63 #else 64 #define CONFIG_SYS_HRCW_HIGH (\ 65 HRCWH_PCI_HOST |\ 66 HRCWH_PCI1_ARBITER_ENABLE |\ 67 HRCWH_CORE_ENABLE |\ 68 HRCWH_FROM_0X00000100 |\ 69 HRCWH_BOOTSEQ_DISABLE |\ 70 HRCWH_SW_WATCHDOG_DISABLE |\ 71 HRCWH_ROM_LOC_LOCAL_16BIT |\ 72 HRCWH_RL_EXT_LEGACY |\ 73 HRCWH_TSEC1M_IN_RGMII |\ 74 HRCWH_TSEC2M_IN_RGMII |\ 75 HRCWH_BIG_ENDIAN |\ 76 HRCWH_LDP_CLEAR) 77 #endif 78 79 /* System performance - define the value i.e. CONFIG_SYS_XXX 80 */ 81 82 /* Arbiter Configuration Register */ 83 #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ 84 #define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ 85 86 /* System Priority Control Regsiter */ 87 #define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC1&2 emergency priority (0-3) */ 88 89 /* System Clock Configuration Register */ 90 #define CONFIG_SYS_SCCR_TSEC1CM 1 /* eTSEC1 clock mode (0-3) */ 91 #define CONFIG_SYS_SCCR_TSEC2CM 1 /* eTSEC2 clock mode (0-3) */ 92 #define CONFIG_SYS_SCCR_SATACM SCCR_SATACM_2 /* SATA1-4 clock mode (0-3) */ 93 94 /* 95 * System IO Config 96 */ 97 #define CONFIG_SYS_SICRH 0x08200000 98 #define CONFIG_SYS_SICRL 0x00000000 99 100 /* 101 * Output Buffer Impedance 102 */ 103 #define CONFIG_SYS_OBIR 0x30100000 104 105 /* 106 * IMMR new address 107 */ 108 #define CONFIG_SYS_IMMR 0xE0000000 109 110 /* 111 * Device configurations 112 */ 113 114 /* Vitesse 7385 */ 115 116 #ifdef CONFIG_VSC7385_ENET 117 118 #define CONFIG_TSEC2 119 120 /* The flash address and size of the VSC7385 firmware image */ 121 #define CONFIG_VSC7385_IMAGE 0xFE7FE000 122 #define CONFIG_VSC7385_IMAGE_SIZE 8192 123 124 #endif 125 126 /* 127 * DDR Setup 128 */ 129 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ 130 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE 131 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE 132 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL 0x03000000 133 #define CONFIG_SYS_83XX_DDR_USES_CS0 134 135 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_DHC_EN | DDRCDR_ODT | DDRCDR_Q_DRN) 136 137 #undef CONFIG_DDR_ECC /* support DDR ECC function */ 138 #undef CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */ 139 140 #undef CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */ 141 142 /* 143 * Manually set up DDR parameters 144 */ 145 #define CONFIG_SYS_DDR_SIZE 256 /* MB */ 146 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f 147 #define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ 148 | CSCONFIG_ODT_WR_ONLY_CURRENT \ 149 | CSCONFIG_ROW_BIT_13 \ 150 | CSCONFIG_COL_BIT_10) 151 152 #define CONFIG_SYS_DDR_TIMING_3 0x00000000 153 #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ 154 | (0 << TIMING_CFG0_WRT_SHIFT) \ 155 | (0 << TIMING_CFG0_RRT_SHIFT) \ 156 | (0 << TIMING_CFG0_WWT_SHIFT) \ 157 | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \ 158 | (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \ 159 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \ 160 | (2 << TIMING_CFG0_MRS_CYC_SHIFT)) 161 /* 0x00260802 */ /* DDR400 */ 162 #define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \ 163 | (9 << TIMING_CFG1_ACTTOPRE_SHIFT) \ 164 | (3 << TIMING_CFG1_ACTTORW_SHIFT) \ 165 | (7 << TIMING_CFG1_CASLAT_SHIFT) \ 166 | (13 << TIMING_CFG1_REFREC_SHIFT) \ 167 | (3 << TIMING_CFG1_WRREC_SHIFT) \ 168 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \ 169 | (2 << TIMING_CFG1_WRTORD_SHIFT)) 170 /* 0x3937d322 */ 171 #define CONFIG_SYS_DDR_TIMING_2 ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \ 172 | (5 << TIMING_CFG2_CPO_SHIFT) \ 173 | (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \ 174 | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \ 175 | (3 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \ 176 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \ 177 | (8 << TIMING_CFG2_FOUR_ACT_SHIFT)) 178 /* 0x02984cc8 */ 179 180 #define CONFIG_SYS_DDR_INTERVAL ((1024 << SDRAM_INTERVAL_REFINT_SHIFT) \ 181 | (0 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) 182 /* 0x06090100 */ 183 184 #if defined(CONFIG_DDR_2T_TIMING) 185 #define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \ 186 | SDRAM_CFG_SDRAM_TYPE_DDR2 \ 187 | SDRAM_CFG_32_BE \ 188 | SDRAM_CFG_2T_EN) 189 /* 0x43088000 */ 190 #else 191 #define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \ 192 | SDRAM_CFG_SDRAM_TYPE_DDR2) 193 /* 0x43000000 */ 194 #endif 195 #define CONFIG_SYS_DDR_SDRAM_CFG2 0x00001000 /* 1 posted refresh */ 196 #define CONFIG_SYS_DDR_MODE ((0x0406 << SDRAM_MODE_ESD_SHIFT) \ 197 | (0x0442 << SDRAM_MODE_SD_SHIFT)) 198 /* 0x04400442 */ /* DDR400 */ 199 #define CONFIG_SYS_DDR_MODE2 0x00000000 200 201 /* 202 * Memory test 203 */ 204 #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ 205 #define CONFIG_SYS_MEMTEST_START 0x00040000 /* memtest region */ 206 #define CONFIG_SYS_MEMTEST_END 0x0ef70010 207 208 /* 209 * The reserved memory 210 */ 211 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 212 213 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 214 #define CONFIG_SYS_RAMBOOT 215 #else 216 #undef CONFIG_SYS_RAMBOOT 217 #endif 218 219 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ 220 #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ 221 222 /* 223 * Initial RAM Base Address Setup 224 */ 225 #define CONFIG_SYS_INIT_RAM_LOCK 1 226 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ 227 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ 228 #define CONFIG_SYS_GBL_DATA_OFFSET \ 229 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 230 231 /* 232 * Local Bus Configuration & Clock Setup 233 */ 234 #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP 235 #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 236 #define CONFIG_SYS_LBC_LBCR 0x00000000 237 #define CONFIG_FSL_ELBC 1 238 239 /* 240 * FLASH on the Local Bus 241 */ 242 #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ 243 #define CONFIG_SYS_FLASH_SIZE 8 /* max FLASH size is 32M */ 244 245 #define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ 246 247 /* Window base at flash base */ 248 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE 249 #define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 /* 8 MB window size */ 250 251 #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ 252 | BR_PS_16 /* 16 bit port */ \ 253 | BR_MS_GPCM /* MSEL = GPCM */ \ 254 | BR_V) /* valid */ 255 #define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ 256 | OR_GPCM_XACS \ 257 | OR_GPCM_SCY_9 \ 258 | OR_GPCM_EHTR_SET \ 259 | OR_GPCM_EAD) 260 /* 0xFF800191 */ 261 262 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 263 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ 264 265 #undef CONFIG_SYS_FLASH_CHECKSUM 266 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 267 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 268 269 /* 270 * NAND Flash on the Local Bus 271 */ 272 #define CONFIG_SYS_NAND_BASE 0xE0600000 273 #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE \ 274 | BR_DECC_CHK_GEN /* Use HW ECC */ \ 275 | BR_PS_8 /* 8 bit port */ \ 276 | BR_MS_FCM /* MSEL = FCM */ \ 277 | BR_V) /* valid */ 278 #define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ 279 | OR_FCM_CSCT \ 280 | OR_FCM_CST \ 281 | OR_FCM_CHT \ 282 | OR_FCM_SCY_1 \ 283 | OR_FCM_TRLX \ 284 | OR_FCM_EHTR) 285 #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE 286 #define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) 287 288 /* Vitesse 7385 */ 289 290 #define CONFIG_SYS_VSC7385_BASE 0xF0000000 291 292 #ifdef CONFIG_VSC7385_ENET 293 294 #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VSC7385_BASE \ 295 | BR_PS_8 \ 296 | BR_MS_GPCM \ 297 | BR_V) 298 /* 0xF0000801 */ 299 #define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB \ 300 | OR_GPCM_CSNT \ 301 | OR_GPCM_XACS \ 302 | OR_GPCM_SCY_15 \ 303 | OR_GPCM_SETA \ 304 | OR_GPCM_TRLX_SET \ 305 | OR_GPCM_EHTR_SET \ 306 | OR_GPCM_EAD) 307 /* 0xfffe09ff */ 308 309 /* Access Base */ 310 #define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE 311 #define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) 312 313 #endif 314 315 /* 316 * Serial Port 317 */ 318 #define CONFIG_SYS_NS16550_SERIAL 319 #define CONFIG_SYS_NS16550_REG_SIZE 1 320 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 321 322 #define CONFIG_SYS_BAUDRATE_TABLE \ 323 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} 324 325 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) 326 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) 327 328 /* SERDES */ 329 #define CONFIG_FSL_SERDES 330 #define CONFIG_FSL_SERDES1 0xe3000 331 #define CONFIG_FSL_SERDES2 0xe3100 332 333 /* I2C */ 334 #define CONFIG_SYS_I2C 335 #define CONFIG_SYS_I2C_FSL 336 #define CONFIG_SYS_FSL_I2C_SPEED 400000 337 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 338 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 339 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x51} } 340 341 /* 342 * Config on-board RTC 343 */ 344 #define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ 345 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ 346 347 /* 348 * General PCI 349 * Addresses are mapped 1-1. 350 */ 351 #define CONFIG_SYS_PCI_MEM_BASE 0x80000000 352 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE 353 #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256M */ 354 #define CONFIG_SYS_PCI_MMIO_BASE 0x90000000 355 #define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE 356 #define CONFIG_SYS_PCI_MMIO_SIZE 0x10000000 /* 256M */ 357 #define CONFIG_SYS_PCI_IO_BASE 0x00000000 358 #define CONFIG_SYS_PCI_IO_PHYS 0xE0300000 359 #define CONFIG_SYS_PCI_IO_SIZE 0x100000 /* 1M */ 360 361 #define CONFIG_SYS_PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE 362 #define CONFIG_SYS_PCI_SLV_MEM_BUS 0x00000000 363 #define CONFIG_SYS_PCI_SLV_MEM_SIZE 0x80000000 364 365 #define CONFIG_SYS_PCIE1_BASE 0xA0000000 366 #define CONFIG_SYS_PCIE1_CFG_BASE 0xA0000000 367 #define CONFIG_SYS_PCIE1_CFG_SIZE 0x08000000 368 #define CONFIG_SYS_PCIE1_MEM_BASE 0xA8000000 369 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xA8000000 370 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 371 #define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 372 #define CONFIG_SYS_PCIE1_IO_PHYS 0xB8000000 373 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 374 375 #define CONFIG_SYS_PCIE2_BASE 0xC0000000 376 #define CONFIG_SYS_PCIE2_CFG_BASE 0xC0000000 377 #define CONFIG_SYS_PCIE2_CFG_SIZE 0x08000000 378 #define CONFIG_SYS_PCIE2_MEM_BASE 0xC8000000 379 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xC8000000 380 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 381 #define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 382 #define CONFIG_SYS_PCIE2_IO_PHYS 0xD8000000 383 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 384 385 #ifdef CONFIG_PCI 386 #define CONFIG_PCI_INDIRECT_BRIDGE 387 388 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 389 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ 390 #endif /* CONFIG_PCI */ 391 392 /* 393 * TSEC 394 */ 395 #ifdef CONFIG_TSEC_ENET 396 397 #define CONFIG_GMII /* MII PHY management */ 398 399 #define CONFIG_TSEC1 400 401 #ifdef CONFIG_TSEC1 402 #define CONFIG_HAS_ETH0 403 #define CONFIG_TSEC1_NAME "TSEC0" 404 #define CONFIG_SYS_TSEC1_OFFSET 0x24000 405 #define TSEC1_PHY_ADDR 2 406 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 407 #define TSEC1_PHYIDX 0 408 #endif 409 410 #ifdef CONFIG_TSEC2 411 #define CONFIG_HAS_ETH1 412 #define CONFIG_TSEC2_NAME "TSEC1" 413 #define CONFIG_SYS_TSEC2_OFFSET 0x25000 414 #define TSEC2_PHY_ADDR 0x1c 415 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 416 #define TSEC2_PHYIDX 0 417 #endif 418 419 /* Options are: TSEC[0-1] */ 420 #define CONFIG_ETHPRIME "TSEC0" 421 422 #endif 423 424 /* 425 * SATA 426 */ 427 #define CONFIG_SYS_SATA_MAX_DEVICE 2 428 #define CONFIG_SATA1 429 #define CONFIG_SYS_SATA1_OFFSET 0x18000 430 #define CONFIG_SYS_SATA1 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET) 431 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 432 #define CONFIG_SATA2 433 #define CONFIG_SYS_SATA2_OFFSET 0x19000 434 #define CONFIG_SYS_SATA2 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET) 435 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 436 437 #ifdef CONFIG_FSL_SATA 438 #define CONFIG_LBA48 439 #endif 440 441 /* 442 * Environment 443 */ 444 #ifndef CONFIG_SYS_RAMBOOT 445 #define CONFIG_ENV_ADDR \ 446 (CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN) 447 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for env */ 448 #define CONFIG_ENV_SIZE 0x4000 449 #else 450 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-0x1000) 451 #define CONFIG_ENV_SIZE 0x2000 452 #endif 453 454 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 455 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 456 457 /* 458 * BOOTP options 459 */ 460 #define CONFIG_BOOTP_BOOTFILESIZE 461 462 /* 463 * Command line configuration. 464 */ 465 466 #undef CONFIG_WATCHDOG /* watchdog disabled */ 467 468 #ifdef CONFIG_MMC 469 #define CONFIG_FSL_ESDHC_PIN_MUX 470 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR 471 #endif 472 473 /* 474 * Miscellaneous configurable options 475 */ 476 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 477 478 /* 479 * For booting Linux, the board info and command line data 480 * have to be in the first 256 MB of memory, since this is 481 * the maximum mapped by the Linux kernel during initialization. 482 */ 483 #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ 484 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 485 486 /* 487 * Core HID Setup 488 */ 489 #define CONFIG_SYS_HID0_INIT 0x000000000 490 #define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK \ 491 | HID0_ENABLE_INSTRUCTION_CACHE) 492 #define CONFIG_SYS_HID2 HID2_HBE 493 494 /* 495 * MMU Setup 496 */ 497 498 #define CONFIG_HIGH_BATS 1 /* High BATs supported */ 499 500 /* DDR: cache cacheable */ 501 #define CONFIG_SYS_SDRAM_LOWER CONFIG_SYS_SDRAM_BASE 502 #define CONFIG_SYS_SDRAM_UPPER (CONFIG_SYS_SDRAM_BASE + 0x10000000) 503 504 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_LOWER \ 505 | BATL_PP_RW \ 506 | BATL_MEMCOHERENCE) 507 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_LOWER \ 508 | BATU_BL_256M \ 509 | BATU_VS \ 510 | BATU_VP) 511 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L 512 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U 513 514 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_SDRAM_UPPER \ 515 | BATL_PP_RW \ 516 | BATL_MEMCOHERENCE) 517 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_SDRAM_UPPER \ 518 | BATU_BL_256M \ 519 | BATU_VS \ 520 | BATU_VP) 521 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L 522 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U 523 524 /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ 525 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_IMMR \ 526 | BATL_PP_RW \ 527 | BATL_CACHEINHIBIT \ 528 | BATL_GUARDEDSTORAGE) 529 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_IMMR \ 530 | BATU_BL_8M \ 531 | BATU_VS \ 532 | BATU_VP) 533 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L 534 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U 535 536 /* L2 Switch: cache-inhibit and guarded */ 537 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_VSC7385_BASE \ 538 | BATL_PP_RW \ 539 | BATL_CACHEINHIBIT \ 540 | BATL_GUARDEDSTORAGE) 541 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_VSC7385_BASE \ 542 | BATU_BL_128K \ 543 | BATU_VS \ 544 | BATU_VP) 545 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L 546 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U 547 548 /* FLASH: icache cacheable, but dcache-inhibit and guarded */ 549 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_FLASH_BASE \ 550 | BATL_PP_RW \ 551 | BATL_MEMCOHERENCE) 552 #define CONFIG_SYS_IBAT4U (CONFIG_SYS_FLASH_BASE \ 553 | BATU_BL_32M \ 554 | BATU_VS \ 555 | BATU_VP) 556 #define CONFIG_SYS_DBAT4L (CONFIG_SYS_FLASH_BASE \ 557 | BATL_PP_RW \ 558 | BATL_CACHEINHIBIT \ 559 | BATL_GUARDEDSTORAGE) 560 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U 561 562 /* Stack in dcache: cacheable, no memory coherence */ 563 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) 564 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_INIT_RAM_ADDR \ 565 | BATU_BL_128K \ 566 | BATU_VS \ 567 | BATU_VP) 568 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L 569 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U 570 571 #ifdef CONFIG_PCI 572 /* PCI MEM space: cacheable */ 573 #define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI_MEM_PHYS \ 574 | BATL_PP_RW \ 575 | BATL_MEMCOHERENCE) 576 #define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI_MEM_PHYS \ 577 | BATU_BL_256M \ 578 | BATU_VS \ 579 | BATU_VP) 580 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 581 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 582 /* PCI MMIO space: cache-inhibit and guarded */ 583 #define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI_MMIO_PHYS \ 584 | BATL_PP_RW \ 585 | BATL_CACHEINHIBIT \ 586 | BATL_GUARDEDSTORAGE) 587 #define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI_MMIO_PHYS \ 588 | BATU_BL_256M \ 589 | BATU_VS \ 590 | BATU_VP) 591 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 592 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 593 #else 594 #define CONFIG_SYS_IBAT6L (0) 595 #define CONFIG_SYS_IBAT6U (0) 596 #define CONFIG_SYS_IBAT7L (0) 597 #define CONFIG_SYS_IBAT7U (0) 598 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 599 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 600 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 601 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 602 #endif 603 604 #if defined(CONFIG_CMD_KGDB) 605 #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ 606 #endif 607 608 /* 609 * Environment Configuration 610 */ 611 #define CONFIG_ENV_OVERWRITE 612 613 #define CONFIG_HAS_FSL_DR_USB 614 #define CONFIG_USB_EHCI_FSL 615 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 616 617 #define CONFIG_NETDEV "eth1" 618 619 #define CONFIG_HOSTNAME "mpc837x_rdb" 620 #define CONFIG_ROOTPATH "/nfsroot" 621 #define CONFIG_RAMDISKFILE "rootfs.ext2.gz.uboot" 622 #define CONFIG_BOOTFILE "uImage" 623 /* U-Boot image on TFTP server */ 624 #define CONFIG_UBOOTPATH "u-boot.bin" 625 #define CONFIG_FDTFILE "mpc8379_rdb.dtb" 626 627 /* default location for tftp and bootm */ 628 #define CONFIG_LOADADDR 800000 629 630 #define CONFIG_EXTRA_ENV_SETTINGS \ 631 "netdev=" CONFIG_NETDEV "\0" \ 632 "uboot=" CONFIG_UBOOTPATH "\0" \ 633 "tftpflash=tftp $loadaddr $uboot;" \ 634 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ 635 " +$filesize; " \ 636 "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ 637 " +$filesize; " \ 638 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 639 " $filesize; " \ 640 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ 641 " +$filesize; " \ 642 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 643 " $filesize\0" \ 644 "fdtaddr=780000\0" \ 645 "fdtfile=" CONFIG_FDTFILE "\0" \ 646 "ramdiskaddr=1000000\0" \ 647 "ramdiskfile=" CONFIG_RAMDISKFILE "\0" \ 648 "console=ttyS0\0" \ 649 "setbootargs=setenv bootargs " \ 650 "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ 651 "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ 652 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \ 653 "$netdev:off " \ 654 "root=$rootdev rw console=$console,$baudrate $othbootargs\0" 655 656 #define CONFIG_NFSBOOTCOMMAND \ 657 "setenv rootdev /dev/nfs;" \ 658 "run setbootargs;" \ 659 "run setipargs;" \ 660 "tftp $loadaddr $bootfile;" \ 661 "tftp $fdtaddr $fdtfile;" \ 662 "bootm $loadaddr - $fdtaddr" 663 664 #define CONFIG_RAMBOOTCOMMAND \ 665 "setenv rootdev /dev/ram;" \ 666 "run setbootargs;" \ 667 "tftp $ramdiskaddr $ramdiskfile;" \ 668 "tftp $loadaddr $bootfile;" \ 669 "tftp $fdtaddr $fdtfile;" \ 670 "bootm $loadaddr $ramdiskaddr $fdtaddr" 671 672 #endif /* __CONFIG_H */ 673