1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2013 Seco S.r.l
4  *
5  * Configuration settings for the Seco Boards.
6  */
7 
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10 
11 #include "mx6_common.h"
12 
13 #define CONFIG_BOARD_REVISION_TAG
14 
15 /* Size of malloc() pool */
16 #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
17 
18 #define CONFIG_MXC_UART
19 #define CONFIG_MXC_UART_BASE		UART2_BASE
20 
21 #define CONFIG_SYS_MEMTEST_START	0x10000000
22 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
23 
24 /* MMC Configuration */
25 #define CONFIG_SYS_FSL_USDHC_NUM        2
26 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
27 
28 /* Ethernet Configuration */
29 #define CONFIG_FEC_MXC
30 #define IMX_FEC_BASE			ENET_BASE_ADDR
31 #define CONFIG_FEC_XCV_TYPE		RGMII
32 #define CONFIG_ETHPRIME			"FEC"
33 #define CONFIG_FEC_MXC_PHYADDR		6
34 
35 #define CONFIG_EXTRA_ENV_SETTINGS					\
36 	"netdev=eth0\0"							\
37 	"ethprime=FEC0\0"						\
38 	"netdev=eth0\0"							\
39 	"ethprime=FEC0\0"						\
40 	"uboot=u-boot.bin\0"						\
41 	"kernel=uImage\0"						\
42 	"nfsroot=/opt/eldk/arm\0"					\
43 	"ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0"		\
44 	"ip_server=10.0.0.1\0"						\
45 	"nfs_path=/targetfs \0"						\
46 	"memory=mem=1024M\0"						\
47 	"bootdev=mmc dev 0; ext2load mmc 0:1\0"				\
48 	"root=root=/dev/mmcblk0p1\0"					\
49 	"option=rootwait rw fixrtc rootflags=barrier=1\0"		\
50 	"cpu_freq=arm_freq=996\0"					\
51 	"setbootargs=setenv bootargs console=ttymxc1,115200 ${root}"	\
52 		" ${option} ${memory} ${cpu_freq}\0"			\
53 	"setbootargs_nfs=setenv bootargs console=ttymxc1,115200"	\
54 		" root=/dev/nfs  nfsroot=${ip_server}:${nfs_path}"	\
55 		" nolock,wsize=4096,rsize=4096  ip=:::::eth0:dhcp"	\
56 		" ${memory} ${cpu_freq}\0"				\
57 	"setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0"	\
58 	"bootcmd=run setbootargs; run setbootdev; run boot_dev;"	\
59 		" bootm 0x10800000\0"					\
60 	"stdin=serial\0"						\
61 	"stdout=serial\0"						\
62 	"stderr=serial\0"
63 
64 #define CONFIG_SYS_HZ			1000
65 
66 /* Physical Memory Map */
67 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
68 #define PHYS_SDRAM_SIZE			(2u * 1024 * 1024 * 1024)
69 
70 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
71 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
72 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
73 
74 #define CONFIG_SYS_INIT_SP_OFFSET	\
75 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
76 #define CONFIG_SYS_INIT_SP_ADDR		\
77 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
78 
79 /* Environment organization */
80 #define CONFIG_ENV_SIZE			(8 * 1024)
81 
82 #if defined(CONFIG_ENV_IS_IN_MMC)
83 	#define CONFIG_ENV_OFFSET		(6 * 128 * 1024)
84 	#define CONFIG_SYS_MMC_ENV_DEV		0
85 	#define CONFIG_DYNAMIC_MMC_DEVNO
86 #endif
87 
88 #endif /* __CONFIG_H */
89