1QA output created by 051 2Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 3Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base 4 5=== Unknown option === 6 7Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0 8QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt' 9 10Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0 11QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt' 12 13Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0 14QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt' 15 16Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0 17QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt' 18 19 20=== Unknown protocol option === 21 22Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt= 23QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=: Block protocol 'file' doesn't support the option 'unknown_opt' 24 25Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on 26QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on: Block protocol 'file' doesn't support the option 'unknown_opt' 27 28Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234 29QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234: Block protocol 'file' doesn't support the option 'unknown_opt' 30 31Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo 32QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo: Block protocol 'file' doesn't support the option 'unknown_opt' 33 34 35=== Invalid format === 36 37Testing: -drive file=TEST_DIR/t.qcow2,format=foo 38QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=foo: Unknown driver 'foo' 39 40Testing: -drive file=TEST_DIR/t.qcow2,driver=foo 41QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=foo: Unknown driver 'foo' 42 43Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2 44QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: Cannot specify both 'driver' and 'format' 45 46Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2 47QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2: Cannot specify both 'driver' and 'format' 48 49 50=== Node names === 51 52Testing: -drive file=TEST_DIR/t.qcow2,node-name=x123456789012345678901234567890 53QEMU X.Y.Z monitor - type 'help' for more information 54(qemu) quit 55 56Testing: -drive file=TEST_DIR/t.qcow2,node-name=x1234567890123456789012345678901 57QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=x1234567890123456789012345678901: Node name too long 58 59Testing: -drive file=TEST_DIR/t.qcow2,node-name=All-Types.of_all0wed_chars 60QEMU X.Y.Z monitor - type 'help' for more information 61(qemu) quit 62 63Testing: -drive file=TEST_DIR/t.qcow2,node-name=123foo 64QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=123foo: Invalid node name 65 66Testing: -drive file=TEST_DIR/t.qcow2,node-name=_foo 67QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=_foo: Invalid node name 68 69Testing: -drive file=TEST_DIR/t.qcow2,node-name=foo#12 70QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=foo#12: Invalid node name 71 72 73=== Device without drive === 74 75Testing: -device VIRTIO_SCSI -device scsi-hd 76QEMU X.Y.Z monitor - type 'help' for more information 77(qemu) QEMU_PROG: -device scsi-hd: drive property not set 78 79 80=== Overriding backing file === 81 82Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig,if=none,id=drive0 -nodefaults 83QEMU X.Y.Z monitor - type 'help' for more information 84(qemu) info block 85drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.orig"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2) 86 Removable device: not locked, tray closed 87 Cache mode: writeback 88 Backing file: TEST_DIR/t.qcow2.orig (chain depth: 1) 89(qemu) quit 90 91Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig 92QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files 93 94Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig 95QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files 96 97Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig 98QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files 99 100 101=== Enable and disable lazy refcounting on the command line, plus some invalid values === 102 103Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 104Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on 105QEMU X.Y.Z monitor - type 'help' for more information 106(qemu) quit 107 108Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off 109QEMU X.Y.Z monitor - type 'help' for more information 110(qemu) quit 111 112Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts= 113QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=: Parameter 'lazy-refcounts' expects 'on' or 'off' 114 115Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42 116QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42: Parameter 'lazy-refcounts' expects 'on' or 'off' 117 118Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo 119QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo: Parameter 'lazy-refcounts' expects 'on' or 'off' 120 121 122=== With version 2 images enabling lazy refcounts must fail === 123 124Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 125Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on 126QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: Lazy refcounts require a qcow2 image with at least qemu 1.1 compatibility level 127 128Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off 129QEMU X.Y.Z monitor - type 'help' for more information 130(qemu) quit 131 132 133=== No medium === 134 135Testing: -drive if=floppy 136QEMU X.Y.Z monitor - type 'help' for more information 137(qemu) quit 138 139Testing: -drive if=ide,media=cdrom 140QEMU X.Y.Z monitor - type 'help' for more information 141(qemu) quit 142 143Testing: -drive if=ide 144QEMU X.Y.Z monitor - type 'help' for more information 145(qemu) QEMU_PROG: Initialization of device ide-hd failed: Device needs media, but drive is empty 146 147Testing: -drive if=virtio 148QEMU X.Y.Z monitor - type 'help' for more information 149(qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty 150 151Testing: -drive if=none,id=disk -device ide-cd,drive=disk 152QEMU X.Y.Z monitor - type 'help' for more information 153(qemu) quit 154 155Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk 156QEMU X.Y.Z monitor - type 'help' for more information 157(qemu) quit 158 159Testing: -drive if=none,id=disk -device ide-drive,drive=disk 160QEMU X.Y.Z monitor - type 'help' for more information 161(qemu) QEMU_PROG: -device ide-drive,drive=disk: warning: 'ide-drive' is deprecated, please use 'ide-hd' or 'ide-cd' instead 162QEMU_PROG: -device ide-drive,drive=disk: Device needs media, but drive is empty 163 164Testing: -drive if=none,id=disk -device ide-hd,drive=disk 165QEMU X.Y.Z monitor - type 'help' for more information 166(qemu) QEMU_PROG: -device ide-hd,drive=disk: Device needs media, but drive is empty 167 168Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk 169QEMU X.Y.Z monitor - type 'help' for more information 170(qemu) QEMU_PROG: -device scsi-disk,drive=disk: warning: 'scsi-disk' is deprecated, please use 'scsi-hd' or 'scsi-cd' instead 171QEMU_PROG: -device scsi-disk,drive=disk: Device needs media, but drive is empty 172 173Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk 174QEMU X.Y.Z monitor - type 'help' for more information 175(qemu) QEMU_PROG: -device scsi-hd,drive=disk: Device needs media, but drive is empty 176 177 178=== Attach to node in non-default iothread === 179 180Testing: -drive file=TEST_DIR/t.qcow2,if=none,node-name=disk -object iothread,id=thread0 -device virtio-scsi,iothread=thread0,id=virtio-scsi0 -device scsi-hd,bus=virtio-scsi0.0,drive=disk,share-rw=on -device ide-hd,drive=disk,share-rw=on 181QEMU X.Y.Z monitor - type 'help' for more information 182(qemu) QEMU_PROG: -device ide-hd,drive=disk,share-rw=on: Cannot change iothread of active block backend 183 184Testing: -drive file=TEST_DIR/t.qcow2,if=none,node-name=disk -object iothread,id=thread0 -device virtio-scsi,iothread=thread0,id=virtio-scsi0 -device scsi-hd,bus=virtio-scsi0.0,drive=disk,share-rw=on -device virtio-blk-pci,drive=disk,share-rw=on 185QEMU X.Y.Z monitor - type 'help' for more information 186(qemu) QEMU_PROG: -device virtio-blk-pci,drive=disk,share-rw=on: Cannot change iothread of active block backend 187 188Testing: -drive file=TEST_DIR/t.qcow2,if=none,node-name=disk -object iothread,id=thread0 -device virtio-scsi,iothread=thread0,id=virtio-scsi0 -device scsi-hd,bus=virtio-scsi0.0,drive=disk,share-rw=on -device lsi53c895a,id=lsi0 -device scsi-hd,bus=lsi0.0,drive=disk,share-rw=on 189QEMU X.Y.Z monitor - type 'help' for more information 190(qemu) QEMU_PROG: -device scsi-hd,bus=lsi0.0,drive=disk,share-rw=on: HBA does not support iothreads 191 192Testing: -drive file=TEST_DIR/t.qcow2,if=none,node-name=disk -object iothread,id=thread0 -device virtio-scsi,iothread=thread0,id=virtio-scsi0 -device scsi-hd,bus=virtio-scsi0.0,drive=disk,share-rw=on -device virtio-scsi,id=virtio-scsi1 -device scsi-hd,bus=virtio-scsi1.0,drive=disk,share-rw=on 193QEMU X.Y.Z monitor - type 'help' for more information 194(qemu) QEMU_PROG: -device scsi-hd,bus=virtio-scsi1.0,drive=disk,share-rw=on: Cannot change iothread of active block backend 195 196Testing: -drive file=TEST_DIR/t.qcow2,if=none,node-name=disk -object iothread,id=thread0 -device virtio-scsi,iothread=thread0,id=virtio-scsi0 -device scsi-hd,bus=virtio-scsi0.0,drive=disk,share-rw=on -device virtio-blk-pci,drive=disk,iohtread=iothread0,share-rw=on 197QEMU X.Y.Z monitor - type 'help' for more information 198(qemu) QEMU_PROG: -device virtio-blk-pci,drive=disk,iohtread=iothread0,share-rw=on: Cannot change iothread of active block backend 199 200Testing: -drive file=TEST_DIR/t.qcow2,if=none,node-name=disk -object iothread,id=thread0 -device virtio-scsi,iothread=thread0,id=virtio-scsi0 -device scsi-hd,bus=virtio-scsi0.0,drive=disk,share-rw=on -device virtio-scsi,id=virtio-scsi1,iothread=thread0 -device scsi-hd,bus=virtio-scsi1.0,drive=disk,share-rw=on 201QEMU X.Y.Z monitor - type 'help' for more information 202(qemu) quit 203 204 205=== Read-only === 206 207Testing: -drive file=TEST_DIR/t.qcow2,if=floppy,readonly=on 208QEMU X.Y.Z monitor - type 'help' for more information 209(qemu) quit 210 211Testing: -drive file=TEST_DIR/t.qcow2,if=ide,media=cdrom,readonly=on 212QEMU X.Y.Z monitor - type 'help' for more information 213(qemu) quit 214 215Testing: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on 216QEMU X.Y.Z monitor - type 'help' for more information 217(qemu) QEMU_PROG: Initialization of device ide-hd failed: Block node is read-only 218 219Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on 220QEMU X.Y.Z monitor - type 'help' for more information 221(qemu) quit 222 223Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-cd,drive=disk 224QEMU X.Y.Z monitor - type 'help' for more information 225(qemu) quit 226 227Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-cd,drive=disk 228QEMU X.Y.Z monitor - type 'help' for more information 229(qemu) quit 230 231Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-drive,drive=disk 232QEMU X.Y.Z monitor - type 'help' for more information 233(qemu) QEMU_PROG: -device ide-drive,drive=disk: warning: 'ide-drive' is deprecated, please use 'ide-hd' or 'ide-cd' instead 234QEMU_PROG: -device ide-drive,drive=disk: Block node is read-only 235 236Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-hd,drive=disk 237QEMU X.Y.Z monitor - type 'help' for more information 238(qemu) QEMU_PROG: -device ide-hd,drive=disk: Block node is read-only 239 240Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-disk,drive=disk 241QEMU X.Y.Z monitor - type 'help' for more information 242(qemu) QEMU_PROG: -device scsi-disk,drive=disk: warning: 'scsi-disk' is deprecated, please use 'scsi-hd' or 'scsi-cd' instead 243quit 244 245Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-hd,drive=disk 246QEMU X.Y.Z monitor - type 'help' for more information 247(qemu) quit 248 249 250=== Cache modes === 251 252Testing: -drive driver=null-co,read-zeroes=on,cache=none 253QEMU X.Y.Z monitor - type 'help' for more information 254(qemu) quit 255 256Testing: -drive driver=null-co,read-zeroes=on,cache=directsync 257QEMU X.Y.Z monitor - type 'help' for more information 258(qemu) quit 259 260Testing: -drive driver=null-co,read-zeroes=on,cache=writeback 261QEMU X.Y.Z monitor - type 'help' for more information 262(qemu) quit 263 264Testing: -drive driver=null-co,read-zeroes=on,cache=writethrough 265QEMU X.Y.Z monitor - type 'help' for more information 266(qemu) quit 267 268Testing: -drive driver=null-co,read-zeroes=on,cache=unsafe 269QEMU X.Y.Z monitor - type 'help' for more information 270(qemu) quit 271 272Testing: -drive driver=null-co,cache=invalid_value 273QEMU_PROG: -drive driver=null-co,cache=invalid_value: invalid cache option 274 275Testing: -drive file=TEST_DIR/t.qcow2,cache=writeback,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults 276QEMU X.Y.Z monitor - type 'help' for more information 277(qemu) info block 278drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2) 279 Removable device: not locked, tray closed 280 Cache mode: writeback 281 Backing file: TEST_DIR/t.qcow2.base (chain depth: 1) 282(qemu) info block file 283 284file: TEST_DIR/t.qcow2 (file) 285 Cache mode: writeback 286(qemu) info block backing 287backing: TEST_DIR/t.qcow2.base (qcow2, read-only) 288 Cache mode: writeback, ignore flushes 289(qemu) info block backing-file 290 291backing-file: TEST_DIR/t.qcow2.base (file, read-only) 292 Cache mode: writeback, ignore flushes 293(qemu) quit 294 295Testing: -drive file=TEST_DIR/t.qcow2,cache=writethrough,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults 296QEMU X.Y.Z monitor - type 'help' for more information 297(qemu) info block 298drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2) 299 Removable device: not locked, tray closed 300 Cache mode: writethrough 301 Backing file: TEST_DIR/t.qcow2.base (chain depth: 1) 302(qemu) info block file 303 304file: TEST_DIR/t.qcow2 (file) 305 Cache mode: writeback 306(qemu) info block backing 307backing: TEST_DIR/t.qcow2.base (qcow2, read-only) 308 Cache mode: writeback, ignore flushes 309(qemu) info block backing-file 310 311backing-file: TEST_DIR/t.qcow2.base (file, read-only) 312 Cache mode: writeback, ignore flushes 313(qemu) quit 314 315Testing: -drive file=TEST_DIR/t.qcow2,cache=unsafe,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults 316QEMU X.Y.Z monitor - type 'help' for more information 317(qemu) info block 318drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2) 319 Removable device: not locked, tray closed 320 Cache mode: writeback, ignore flushes 321 Backing file: TEST_DIR/t.qcow2.base (chain depth: 1) 322(qemu) info block file 323 324file: TEST_DIR/t.qcow2 (file) 325 Cache mode: writeback, ignore flushes 326(qemu) info block backing 327backing: TEST_DIR/t.qcow2.base (qcow2, read-only) 328 Cache mode: writeback, ignore flushes 329(qemu) info block backing-file 330 331backing-file: TEST_DIR/t.qcow2.base (file, read-only) 332 Cache mode: writeback, ignore flushes 333(qemu) quit 334 335Testing: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults 336QEMU_PROG: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0: invalid cache option 337 338 339=== Specifying the protocol layer === 340 341Testing: -drive file=TEST_DIR/t.qcow2,file.driver=file 342QEMU X.Y.Z monitor - type 'help' for more information 343(qemu) quit 344 345 346=== Leaving out required options === 347 348Testing: -drive driver=file 349QEMU_PROG: -drive driver=file: The 'file' block driver requires a file name 350 351Testing: -drive driver=file,filename= 352QEMU_PROG: -drive driver=file,filename=: The 'file' block driver requires a file name 353 354Testing: -drive driver=nbd 355QEMU_PROG: -drive driver=nbd: NBD server address missing 356 357Testing: -drive driver=raw 358QEMU_PROG: -drive driver=raw: A block device must be specified for "file" 359 360Testing: -drive file.driver=file 361QEMU_PROG: -drive file.driver=file: The 'file' block driver requires a file name 362 363Testing: -drive file.driver=nbd 364QEMU_PROG: -drive file.driver=nbd: NBD server address missing 365 366Testing: -drive file.driver=raw 367QEMU_PROG: -drive file.driver=raw: A block device must be specified for "file" 368 369Testing: -drive foo=bar 370QEMU_PROG: -drive foo=bar: Must specify either driver or file 371 372 373=== Specifying both an option and its legacy alias === 374 375Testing: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678 376QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678: 'throttling.iops-total' and its alias 'iops' can't be used at the same time 377 378Testing: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678 379QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678: 'throttling.iops-read' and its alias 'iops_rd' can't be used at the same time 380 381Testing: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678 382QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678: 'throttling.iops-write' and its alias 'iops_wr' can't be used at the same time 383 384Testing: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678 385QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678: 'throttling.bps-total' and its alias 'bps' can't be used at the same time 386 387Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678 388QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678: 'throttling.bps-read' and its alias 'bps_rd' can't be used at the same time 389 390Testing: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678 391QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678: 'throttling.bps-write' and its alias 'bps_wr' can't be used at the same time 392 393Testing: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678 394QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678: 'throttling.iops-total-max' and its alias 'iops_max' can't be used at the same time 395 396Testing: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678 397QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678: 'throttling.iops-read-max' and its alias 'iops_rd_max' can't be used at the same time 398 399Testing: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678 400QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678: 'throttling.iops-write-max' and its alias 'iops_wr_max' can't be used at the same time 401 402Testing: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678 403QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678: 'throttling.bps-total-max' and its alias 'bps_max' can't be used at the same time 404 405Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678 406QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678: 'throttling.bps-read-max' and its alias 'bps_rd_max' can't be used at the same time 407 408Testing: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678 409QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678: 'throttling.bps-write-max' and its alias 'bps_wr_max' can't be used at the same time 410 411Testing: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678 412QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678: 'throttling.iops-size' and its alias 'iops_size' can't be used at the same time 413 414Testing: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off 415QEMU_PROG: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off: 'read-only' and its alias 'readonly' can't be used at the same time 416 417 418=== Catching negative/large throttling values === 419 420Testing: -drive file=TEST_DIR/t.qcow2,iops=-1 421QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=-1: bps/iops/max values must be within [0, 1000000000000000] 422 423Testing: -drive file=TEST_DIR/t.qcow2,bps=-2 424QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=-2: bps/iops/max values must be within [0, 1000000000000000] 425 426Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=-3 427QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=-3: bps/iops/max values must be within [0, 1000000000000000] 428 429Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3 430QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3: bps/iops/max values must be within [0, 1000000000000000] 431 432Testing: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4 433QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4: bps/iops/max values must be within [0, 1000000000000000] 434 435Testing: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5 436QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5: bps/iops/max values must be within [0, 1000000000000000] 437 438Testing: -drive file=TEST_DIR/t.qcow2,bps=0 439QEMU X.Y.Z monitor - type 'help' for more information 440(qemu) quit 441 442Testing: -drive file=TEST_DIR/t.qcow2,bps=1 443QEMU X.Y.Z monitor - type 'help' for more information 444(qemu) quit 445 446Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000000 447QEMU X.Y.Z monitor - type 'help' for more information 448(qemu) quit 449 450Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001 451QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001: bps/iops/max values must be within [0, 1000000000000000] 452 453Testing: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999 454QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999: bps/iops/max values must be within [0, 1000000000000000] 455 456 457=== Parsing protocol from file name === 458 459Testing: -hda foo:bar 460QEMU_PROG: -hda foo:bar: Unknown protocol 'foo' 461 462Testing: -drive file=foo:bar 463QEMU_PROG: -drive file=foo:bar: Unknown protocol 'foo' 464 465Testing: -drive file.filename=foo:bar 466QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar': No such file or directory 467 468Testing: -hda file:TEST_DIR/t.qcow2 469QEMU X.Y.Z monitor - type 'help' for more information 470(qemu) quit 471 472Testing: -drive file=file:TEST_DIR/t.qcow2 473QEMU X.Y.Z monitor - type 'help' for more information 474(qemu) quit 475 476Testing: -drive file.filename=file:TEST_DIR/t.qcow2 477QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory 478 479 480=== Snapshot mode === 481 482wrote 4096/4096 bytes at offset 0 4834 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 484Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot 485QEMU X.Y.Z monitor - type 'help' for more information 486(qemu) qemu-io drive0 "write -P 0x22 0 4k" 487wrote 4096/4096 bytes at offset 0 4884 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 489(qemu) quit 490 491Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0 492QEMU X.Y.Z monitor - type 'help' for more information 493(qemu) qemu-io drive0 "write -P 0x22 0 4k" 494wrote 4096/4096 bytes at offset 0 4954 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 496(qemu) quit 497 498Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,snapshot=on,if=none,id=drive0 499QEMU X.Y.Z monitor - type 'help' for more information 500(qemu) qemu-io drive0 "write -P 0x22 0 4k" 501wrote 4096/4096 bytes at offset 0 5024 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 503(qemu) quit 504 505Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,if=none,id=drive0 -snapshot 506QEMU X.Y.Z monitor - type 'help' for more information 507(qemu) qemu-io drive0 "write -P 0x22 0 4k" 508wrote 4096/4096 bytes at offset 0 5094 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 510(qemu) quit 511 512Testing: -drive file=file:TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot 513QEMU X.Y.Z monitor - type 'help' for more information 514(qemu) qemu-io drive0 "write -P 0x22 0 4k" 515wrote 4096/4096 bytes at offset 0 5164 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 517(qemu) quit 518 519Testing: -drive file=file:TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0 520QEMU X.Y.Z monitor - type 'help' for more information 521(qemu) qemu-io drive0 "write -P 0x22 0 4k" 522wrote 4096/4096 bytes at offset 0 5234 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 524(qemu) quit 525 526Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot 527QEMU X.Y.Z monitor - type 'help' for more information 528(qemu) qemu-io drive0 "write -P 0x22 0 4k" 529wrote 4096/4096 bytes at offset 0 5304 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 531(qemu) quit 532 533Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0 534QEMU X.Y.Z monitor - type 'help' for more information 535(qemu) qemu-io drive0 "write -P 0x22 0 4k" 536wrote 4096/4096 bytes at offset 0 5374 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 538(qemu) quit 539 540read 4096/4096 bytes at offset 0 5414 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 542Testing: -drive file=TEST_DIR/t.qcow2,snapshot=off,if=none,id=drive0 543QEMU X.Y.Z monitor - type 'help' for more information 544(qemu) qemu-io drive0 "write -P 0x22 0 4k" 545wrote 4096/4096 bytes at offset 0 5464 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 547(qemu) quit 548 549read 4096/4096 bytes at offset 0 5504 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 551Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0 552QEMU X.Y.Z monitor - type 'help' for more information 553(qemu) qemu-io drive0 "write -P 0x33 0 4k" 554wrote 4096/4096 bytes at offset 0 5554 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 556(qemu) commit drive0 557(qemu) quit 558 559read 4096/4096 bytes at offset 0 5604 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 561Testing: -drive driver=null-co,snapshot=on 562QEMU_PROG: -drive driver=null-co,snapshot=on: Could not get temporary filename: No such file or directory 563 564Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,read-only=on,if=none,id=drive0 565QEMU X.Y.Z monitor - type 'help' for more information 566(qemu) info block 567drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}}, "driver": "qcow2", "file": {"driver": "file", "filename": SNAPSHOT_PATH}} (qcow2, read-only) 568 Removable device: not locked, tray closed 569 Cache mode: writeback, ignore flushes 570 Backing file: TEST_DIR/t.qcow2 (chain depth: 1) 571(qemu) quit 572 573*** done 574