1# Makefile.in generated by automake 1.9.6 from Makefile.am. 2# data/Makefile. Generated from Makefile.in by configure. 3 4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 5# 2003, 2004, 2005 Free Software Foundation, Inc. 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15 16srcdir = . 17top_srcdir = .. 18 19pkgdatadir = $(datadir)/briquolo 20pkglibdir = $(libdir)/briquolo 21pkgincludedir = $(includedir)/briquolo 22top_builddir = .. 23am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 24INSTALL = /usr/bin/install -c 25install_sh_DATA = $(install_sh) -c -m 644 26install_sh_PROGRAM = $(install_sh) -c 27install_sh_SCRIPT = $(install_sh) -c 28INSTALL_HEADER = $(INSTALL_DATA) 29transform = $(program_transform_name) 30NORMAL_INSTALL = : 31PRE_INSTALL = : 32POST_INSTALL = : 33NORMAL_UNINSTALL = : 34PRE_UNINSTALL = : 35POST_UNINSTALL = : 36build_triplet = i686-pc-linux-gnu 37host_triplet = i686-pc-linux-gnu 38target_triplet = i686-pc-linux-gnu 39subdir = data 40DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in 41ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 42am__aclocal_m4_deps = $(top_srcdir)/m4/codeset.m4 \ 43 $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \ 44 $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intdiv0.m4 \ 45 $(top_srcdir)/m4/intmax.m4 $(top_srcdir)/m4/inttypes-pri.m4 \ 46 $(top_srcdir)/m4/inttypes.m4 $(top_srcdir)/m4/inttypes_h.m4 \ 47 $(top_srcdir)/m4/isc-posix.m4 $(top_srcdir)/m4/lcmessage.m4 \ 48 $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ 49 $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/longdouble.m4 \ 50 $(top_srcdir)/m4/longlong.m4 $(top_srcdir)/m4/nls.m4 \ 51 $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/printf-posix.m4 \ 52 $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/signed.m4 \ 53 $(top_srcdir)/m4/size_max.m4 $(top_srcdir)/m4/stdint_h.m4 \ 54 $(top_srcdir)/m4/uintmax_t.m4 $(top_srcdir)/m4/ulonglong.m4 \ 55 $(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wint_t.m4 \ 56 $(top_srcdir)/m4/xsize.m4 $(top_srcdir)/configure.ac 57am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 58 $(ACLOCAL_M4) 59mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs 60CONFIG_HEADER = $(top_builddir)/config.h 61CONFIG_CLEAN_FILES = 62SOURCES = 63DIST_SOURCES = 64RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ 65 html-recursive info-recursive install-data-recursive \ 66 install-exec-recursive install-info-recursive \ 67 install-recursive installcheck-recursive installdirs-recursive \ 68 pdf-recursive ps-recursive uninstall-info-recursive \ 69 uninstall-recursive 70ETAGS = etags 71CTAGS = ctags 72DIST_SUBDIRS = $(SUBDIRS) 73DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 74ACLOCAL = ${SHELL} /home/cedric/fichiers/programmation/briquolo/briquolo-0.5.7/missing --run aclocal-1.9 75ALLOCA = 76AMDEP_FALSE = # 77AMDEP_TRUE = 78AMTAR = ${SHELL} /home/cedric/fichiers/programmation/briquolo/briquolo-0.5.7/missing --run tar 79AUTOCONF = ${SHELL} /home/cedric/fichiers/programmation/briquolo/briquolo-0.5.7/missing --run autoconf 80AUTOHEADER = ${SHELL} /home/cedric/fichiers/programmation/briquolo/briquolo-0.5.7/missing --run autoheader 81AUTOMAKE = ${SHELL} /home/cedric/fichiers/programmation/briquolo/briquolo-0.5.7/missing --run automake-1.9 82AWK = gawk 83BUILD_INCLUDED_LIBINTL = no 84CATOBJEXT = .gmo 85CC = gcc 86CCDEPMODE = depmode=gcc3 87CFLAGS = -g -O2 88CPP = gcc -E 89CPPFLAGS = -DDATADIR_BRIQUOLO=\"${datarootdir}/briquolo\" 90CXX = g++ 91CXXDEPMODE = depmode=gcc3 92CXXFLAGS = -Wall -g -O2 -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT 93CYGPATH_W = echo 94DATADIRNAME = share 95DEFS = -DHAVE_CONFIG_H 96DEPDIR = .deps 97ECHO_C = 98ECHO_N = -n 99ECHO_T = 100EGREP = /bin/grep -E 101EXEEXT = 102GENCAT = gencat 103GLIBC21 = yes 104GMSGFMT = /usr/bin/msgfmt 105GREP = /bin/grep 106HAVE_ASPRINTF = 1 107HAVE_POSIX_PRINTF = 1 108HAVE_SNPRINTF = 1 109HAVE_WPRINTF = 0 110INSTALL_DATA = ${INSTALL} -m 644 111INSTALL_PROGRAM = ${INSTALL} 112INSTALL_SCRIPT = ${INSTALL} 113INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s 114INSTOBJEXT = .mo 115INTLBISON = bison 116INTLLIBS = 117INTLOBJS = 118INTL_LIBTOOL_SUFFIX_PREFIX = 119LDFLAGS = 120LIBICONV = 121LIBINTL = 122LIBOBJS = 123LIBS = -lSDL_ttf -lSDL_mixer -lGLU -lGL -lfreetype -lz -L/usr/lib -lpng12 -lpng12 -L/usr/lib -lSDL -lSDL_mixer -lSDL_ttf 124LTLIBICONV = 125LTLIBINTL = 126LTLIBOBJS = 127MAKEINFO = ${SHELL} /home/cedric/fichiers/programmation/briquolo/briquolo-0.5.7/missing --run makeinfo 128MKINSTALLDIRS = $(top_builddir)/./mkinstalldirs 129MSGFMT = /usr/bin/msgfmt 130MSGMERGE = /usr/bin/msgmerge 131OBJEXT = o 132PACKAGE = briquolo 133PACKAGE_BUGREPORT = cedric.bregardis@free.fr 134PACKAGE_NAME = briquolo 135PACKAGE_STRING = briquolo 0.5.7 136PACKAGE_TARNAME = briquolo 137PACKAGE_VERSION = 0.5.7 138PATH_SEPARATOR = : 139POSUB = po 140RANLIB = ranlib 141SDL_CFLAGS = -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT 142SDL_CONFIG = /usr/bin/sdl-config 143SDL_LIBS = -L/usr/lib -lSDL 144SET_MAKE = 145SHELL = /bin/bash 146STRIP = 147USE_INCLUDED_LIBINTL = no 148USE_NLS = yes 149VERSION = 0.5.7 150XGETTEXT = /usr/bin/xgettext 151XMKMF = 152YACC = bison -y 153YFLAGS = 154ac_ct_CC = gcc 155ac_ct_CXX = g++ 156am__fastdepCC_FALSE = # 157am__fastdepCC_TRUE = 158am__fastdepCXX_FALSE = # 159am__fastdepCXX_TRUE = 160am__include = include 161am__leading_dot = . 162am__quote = 163am__tar = ${AMTAR} chof - "$$tardir" 164am__untar = ${AMTAR} xf - 165bindir = ${exec_prefix}/bin 166build = i686-pc-linux-gnu 167build_alias = 168build_cpu = i686 169build_os = linux-gnu 170build_vendor = pc 171datadir = ${datarootdir} 172datarootdir = ${prefix}/share 173docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} 174dvidir = ${docdir} 175exec_prefix = ${prefix} 176freetypeconfig = /usr/bin/freetype-config 177host = i686-pc-linux-gnu 178host_alias = 179host_cpu = i686 180host_os = linux-gnu 181host_vendor = pc 182htmldir = ${docdir} 183includedir = ${prefix}/include 184infodir = ${datarootdir}/info 185install_sh = /home/cedric/fichiers/programmation/briquolo/briquolo-0.5.7/install-sh 186libdir = ${exec_prefix}/lib 187libexecdir = ${exec_prefix}/libexec 188localedir = ${datarootdir}/locale 189localstatedir = ${prefix}/var 190mandir = ${datarootdir}/man 191mkdir_p = mkdir -p -- 192oldincludedir = /usr/include 193pdfdir = ${docdir} 194pngconfig = /usr/bin/libpng-config 195prefix = /usr/local 196program_transform_name = s,x,x, 197psdir = ${docdir} 198sbindir = ${exec_prefix}/sbin 199sharedstatedir = ${prefix}/com 200sysconfdir = ${prefix}/etc 201target = i686-pc-linux-gnu 202target_alias = 203target_cpu = i686 204target_os = linux-gnu 205target_vendor = pc 206SUBDIRS = data tableau 207all: all-recursive 208 209.SUFFIXES: 210$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 211 @for dep in $?; do \ 212 case '$(am__configure_deps)' in \ 213 *$$dep*) \ 214 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ 215 && exit 0; \ 216 exit 1;; \ 217 esac; \ 218 done; \ 219 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu data/Makefile'; \ 220 cd $(top_srcdir) && \ 221 $(AUTOMAKE) --gnu data/Makefile 222.PRECIOUS: Makefile 223Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 224 @case '$?' in \ 225 *config.status*) \ 226 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ 227 *) \ 228 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ 229 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ 230 esac; 231 232$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 233 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 234 235$(top_srcdir)/configure: $(am__configure_deps) 236 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 237$(ACLOCAL_M4): $(am__aclocal_m4_deps) 238 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 239uninstall-info-am: 240 241# This directory's subdirectories are mostly independent; you can cd 242# into them and run `make' without going through this Makefile. 243# To change the values of `make' variables: instead of editing Makefiles, 244# (1) if the variable is set in `config.status', edit `config.status' 245# (which will cause the Makefiles to be regenerated when you run `make'); 246# (2) otherwise, pass the desired values on the `make' command line. 247$(RECURSIVE_TARGETS): 248 @failcom='exit 1'; \ 249 for f in x $$MAKEFLAGS; do \ 250 case $$f in \ 251 *=* | --[!k]*);; \ 252 *k*) failcom='fail=yes';; \ 253 esac; \ 254 done; \ 255 dot_seen=no; \ 256 target=`echo $@ | sed s/-recursive//`; \ 257 list='$(SUBDIRS)'; for subdir in $$list; do \ 258 echo "Making $$target in $$subdir"; \ 259 if test "$$subdir" = "."; then \ 260 dot_seen=yes; \ 261 local_target="$$target-am"; \ 262 else \ 263 local_target="$$target"; \ 264 fi; \ 265 (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 266 || eval $$failcom; \ 267 done; \ 268 if test "$$dot_seen" = "no"; then \ 269 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 270 fi; test -z "$$fail" 271 272mostlyclean-recursive clean-recursive distclean-recursive \ 273maintainer-clean-recursive: 274 @failcom='exit 1'; \ 275 for f in x $$MAKEFLAGS; do \ 276 case $$f in \ 277 *=* | --[!k]*);; \ 278 *k*) failcom='fail=yes';; \ 279 esac; \ 280 done; \ 281 dot_seen=no; \ 282 case "$@" in \ 283 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 284 *) list='$(SUBDIRS)' ;; \ 285 esac; \ 286 rev=''; for subdir in $$list; do \ 287 if test "$$subdir" = "."; then :; else \ 288 rev="$$subdir $$rev"; \ 289 fi; \ 290 done; \ 291 rev="$$rev ."; \ 292 target=`echo $@ | sed s/-recursive//`; \ 293 for subdir in $$rev; do \ 294 echo "Making $$target in $$subdir"; \ 295 if test "$$subdir" = "."; then \ 296 local_target="$$target-am"; \ 297 else \ 298 local_target="$$target"; \ 299 fi; \ 300 (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 301 || eval $$failcom; \ 302 done && test -z "$$fail" 303tags-recursive: 304 list='$(SUBDIRS)'; for subdir in $$list; do \ 305 test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ 306 done 307ctags-recursive: 308 list='$(SUBDIRS)'; for subdir in $$list; do \ 309 test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ 310 done 311 312ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) 313 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 314 unique=`for i in $$list; do \ 315 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 316 done | \ 317 $(AWK) ' { files[$$0] = 1; } \ 318 END { for (i in files) print i; }'`; \ 319 mkid -fID $$unique 320tags: TAGS 321 322TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ 323 $(TAGS_FILES) $(LISP) 324 tags=; \ 325 here=`pwd`; \ 326 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 327 include_option=--etags-include; \ 328 empty_fix=.; \ 329 else \ 330 include_option=--include; \ 331 empty_fix=; \ 332 fi; \ 333 list='$(SUBDIRS)'; for subdir in $$list; do \ 334 if test "$$subdir" = .; then :; else \ 335 test ! -f $$subdir/TAGS || \ 336 tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ 337 fi; \ 338 done; \ 339 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 340 unique=`for i in $$list; do \ 341 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 342 done | \ 343 $(AWK) ' { files[$$0] = 1; } \ 344 END { for (i in files) print i; }'`; \ 345 if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ 346 test -n "$$unique" || unique=$$empty_fix; \ 347 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 348 $$tags $$unique; \ 349 fi 350ctags: CTAGS 351CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ 352 $(TAGS_FILES) $(LISP) 353 tags=; \ 354 here=`pwd`; \ 355 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 356 unique=`for i in $$list; do \ 357 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 358 done | \ 359 $(AWK) ' { files[$$0] = 1; } \ 360 END { for (i in files) print i; }'`; \ 361 test -z "$(CTAGS_ARGS)$$tags$$unique" \ 362 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 363 $$tags $$unique 364 365GTAGS: 366 here=`$(am__cd) $(top_builddir) && pwd` \ 367 && cd $(top_srcdir) \ 368 && gtags -i $(GTAGS_ARGS) $$here 369 370distclean-tags: 371 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 372 373distdir: $(DISTFILES) 374 @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ 375 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ 376 list='$(DISTFILES)'; for file in $$list; do \ 377 case $$file in \ 378 $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ 379 $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ 380 esac; \ 381 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 382 dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ 383 if test "$$dir" != "$$file" && test "$$dir" != "."; then \ 384 dir="/$$dir"; \ 385 $(mkdir_p) "$(distdir)$$dir"; \ 386 else \ 387 dir=''; \ 388 fi; \ 389 if test -d $$d/$$file; then \ 390 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 391 cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ 392 fi; \ 393 cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ 394 else \ 395 test -f $(distdir)/$$file \ 396 || cp -p $$d/$$file $(distdir)/$$file \ 397 || exit 1; \ 398 fi; \ 399 done 400 list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 401 if test "$$subdir" = .; then :; else \ 402 test -d "$(distdir)/$$subdir" \ 403 || $(mkdir_p) "$(distdir)/$$subdir" \ 404 || exit 1; \ 405 distdir=`$(am__cd) $(distdir) && pwd`; \ 406 top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ 407 (cd $$subdir && \ 408 $(MAKE) $(AM_MAKEFLAGS) \ 409 top_distdir="$$top_distdir" \ 410 distdir="$$distdir/$$subdir" \ 411 distdir) \ 412 || exit 1; \ 413 fi; \ 414 done 415check-am: all-am 416check: check-recursive 417all-am: Makefile 418installdirs: installdirs-recursive 419installdirs-am: 420install: install-recursive 421install-exec: install-exec-recursive 422install-data: install-data-recursive 423uninstall: uninstall-recursive 424 425install-am: all-am 426 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 427 428installcheck: installcheck-recursive 429install-strip: 430 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 431 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 432 `test -z '$(STRIP)' || \ 433 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install 434mostlyclean-generic: 435 436clean-generic: 437 438distclean-generic: 439 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 440 441maintainer-clean-generic: 442 @echo "This command is intended for maintainers to use" 443 @echo "it deletes files that may require special tools to rebuild." 444clean: clean-recursive 445 446clean-am: clean-generic mostlyclean-am 447 448distclean: distclean-recursive 449 -rm -f Makefile 450distclean-am: clean-am distclean-generic distclean-tags 451 452dvi: dvi-recursive 453 454dvi-am: 455 456html: html-recursive 457 458info: info-recursive 459 460info-am: 461 462install-data-am: install-data-local 463 464install-exec-am: 465 466install-info: install-info-recursive 467 468install-man: 469 470installcheck-am: 471 472maintainer-clean: maintainer-clean-recursive 473 -rm -f Makefile 474maintainer-clean-am: distclean-am maintainer-clean-generic 475 476mostlyclean: mostlyclean-recursive 477 478mostlyclean-am: mostlyclean-generic 479 480pdf: pdf-recursive 481 482pdf-am: 483 484ps: ps-recursive 485 486ps-am: 487 488uninstall-am: uninstall-info-am uninstall-local 489 490uninstall-info: uninstall-info-recursive 491 492.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ 493 clean clean-generic clean-recursive ctags ctags-recursive \ 494 distclean distclean-generic distclean-recursive distclean-tags \ 495 distdir dvi dvi-am html html-am info info-am install \ 496 install-am install-data install-data-am install-data-local \ 497 install-exec install-exec-am install-info install-info-am \ 498 install-man install-strip installcheck installcheck-am \ 499 installdirs installdirs-am maintainer-clean \ 500 maintainer-clean-generic maintainer-clean-recursive \ 501 mostlyclean mostlyclean-generic mostlyclean-recursive pdf \ 502 pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ 503 uninstall-info-am uninstall-local 504 505 506install-data-local : 507 touch $(DESTDIR)$(datadir)/$(PACKAGE)/$(VERSION) 508 509uninstall-local : 510 rm -f $(DESTDIR)$(datadir)/$(PACKAGE)/$(VERSION) 511# Tell versions [3.59,3.63) of GNU make to not export all variables. 512# Otherwise a system limit (for SysV at least) may be exceeded. 513.NOEXPORT: 514