1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17VPATH = @srcdir@
18am__is_gnu_make = { \
19  if test -z '$(MAKELEVEL)'; then \
20    false; \
21  elif test -n '$(MAKE_HOST)'; then \
22    true; \
23  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
24    true; \
25  else \
26    false; \
27  fi; \
28}
29am__make_running_with_option = \
30  case $${target_option-} in \
31      ?) ;; \
32      *) echo "am__make_running_with_option: internal error: invalid" \
33              "target option '$${target_option-}' specified" >&2; \
34         exit 1;; \
35  esac; \
36  has_opt=no; \
37  sane_makeflags=$$MAKEFLAGS; \
38  if $(am__is_gnu_make); then \
39    sane_makeflags=$$MFLAGS; \
40  else \
41    case $$MAKEFLAGS in \
42      *\\[\ \	]*) \
43        bs=\\; \
44        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
45          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
46    esac; \
47  fi; \
48  skip_next=no; \
49  strip_trailopt () \
50  { \
51    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
52  }; \
53  for flg in $$sane_makeflags; do \
54    test $$skip_next = yes && { skip_next=no; continue; }; \
55    case $$flg in \
56      *=*|--*) continue;; \
57        -*I) strip_trailopt 'I'; skip_next=yes;; \
58      -*I?*) strip_trailopt 'I';; \
59        -*O) strip_trailopt 'O'; skip_next=yes;; \
60      -*O?*) strip_trailopt 'O';; \
61        -*l) strip_trailopt 'l'; skip_next=yes;; \
62      -*l?*) strip_trailopt 'l';; \
63      -[dEDm]) skip_next=yes;; \
64      -[JT]) skip_next=yes;; \
65    esac; \
66    case $$flg in \
67      *$$target_option*) has_opt=yes; break;; \
68    esac; \
69  done; \
70  test $$has_opt = yes
71am__make_dryrun = (target_option=n; $(am__make_running_with_option))
72am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
73pkgdatadir = $(datadir)/@PACKAGE@
74pkgincludedir = $(includedir)/@PACKAGE@
75pkglibdir = $(libdir)/@PACKAGE@
76pkglibexecdir = $(libexecdir)/@PACKAGE@
77am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
78install_sh_DATA = $(install_sh) -c -m 644
79install_sh_PROGRAM = $(install_sh) -c
80install_sh_SCRIPT = $(install_sh) -c
81INSTALL_HEADER = $(INSTALL_DATA)
82transform = $(program_transform_name)
83NORMAL_INSTALL = :
84PRE_INSTALL = :
85POST_INSTALL = :
86NORMAL_UNINSTALL = :
87PRE_UNINSTALL = :
88POST_UNINSTALL = :
89build_triplet = @build@
90host_triplet = @host@
91@HAVE_PO_TRUE@am__append_1 = \
92@HAVE_PO_TRUE@m4/codeset.m4 \
93@HAVE_PO_TRUE@m4/gettext.m4 \
94@HAVE_PO_TRUE@m4/glibc21.m4 \
95@HAVE_PO_TRUE@m4/iconv.m4 \
96@HAVE_PO_TRUE@m4/intdiv0.m4 \
97@HAVE_PO_TRUE@m4/inttypes.m4 \
98@HAVE_PO_TRUE@m4/inttypes_h.m4 \
99@HAVE_PO_TRUE@m4/inttypes-pri.m4 \
100@HAVE_PO_TRUE@m4/isc-posix.m4 \
101@HAVE_PO_TRUE@m4/lcmessage.m4 \
102@HAVE_PO_TRUE@m4/lib-ld.m4 \
103@HAVE_PO_TRUE@m4/lib-link.m4 \
104@HAVE_PO_TRUE@m4/lib-prefix.m4 \
105@HAVE_PO_TRUE@m4/libtool.m4 \
106@HAVE_PO_TRUE@m4/lt~obsolete.m4 \
107@HAVE_PO_TRUE@m4/ltoptions.m4 \
108@HAVE_PO_TRUE@m4/ltsugar.m4 \
109@HAVE_PO_TRUE@m4/ltversion.m4 \
110@HAVE_PO_TRUE@m4/nls.m4 \
111@HAVE_PO_TRUE@m4/po.m4 \
112@HAVE_PO_TRUE@m4/progtest.m4 \
113@HAVE_PO_TRUE@m4/stdint_h.m4 \
114@HAVE_PO_TRUE@m4/uintmax_t.m4 \
115@HAVE_PO_TRUE@m4/ulonglong.m4 \
116@HAVE_PO_TRUE@po/boldquot.sed \
117@HAVE_PO_TRUE@po/en@boldquot.header \
118@HAVE_PO_TRUE@po/en@quot.header \
119@HAVE_PO_TRUE@po/insert-header.sin \
120@HAVE_PO_TRUE@po/Makefile.in.in \
121@HAVE_PO_TRUE@po/Makevars.template \
122@HAVE_PO_TRUE@po/quot.sed \
123@HAVE_PO_TRUE@po/remove-potcdate.sin \
124@HAVE_PO_TRUE@po/Rules-quot
125
126@HAVE_PO_TRUE@am__append_2 = po
127subdir = .
128ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
129am__aclocal_m4_deps = $(top_srcdir)/m4/ac_attribute.m4 \
130	$(top_srcdir)/m4/efl_binary.m4 $(top_srcdir)/m4/efl_tests.m4 \
131	$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
132	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
133	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
134	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
135	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
136am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
137	$(ACLOCAL_M4)
138DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
139	$(am__configure_deps) $(am__DIST_COMMON)
140am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
141 configure.lineno config.status.lineno
142mkinstalldirs = $(install_sh) -d
143CONFIG_HEADER = $(top_builddir)/src/bin/config.h
144CONFIG_CLEAN_FILES = ephoto.spec
145CONFIG_CLEAN_VPATH_FILES =
146AM_V_P = $(am__v_P_@AM_V@)
147am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
148am__v_P_0 = false
149am__v_P_1 = :
150AM_V_GEN = $(am__v_GEN_@AM_V@)
151am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
152am__v_GEN_0 = @echo "  GEN     " $@;
153am__v_GEN_1 =
154AM_V_at = $(am__v_at_@AM_V@)
155am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
156am__v_at_0 = @
157am__v_at_1 =
158SOURCES =
159DIST_SOURCES =
160RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
161	ctags-recursive dvi-recursive html-recursive info-recursive \
162	install-data-recursive install-dvi-recursive \
163	install-exec-recursive install-html-recursive \
164	install-info-recursive install-pdf-recursive \
165	install-ps-recursive install-recursive installcheck-recursive \
166	installdirs-recursive pdf-recursive ps-recursive \
167	tags-recursive uninstall-recursive
168am__can_run_installinfo = \
169  case $$AM_UPDATE_INFO_DIR in \
170    n|no|NO) false;; \
171    *) (install-info --version) >/dev/null 2>&1;; \
172  esac
173am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
174am__vpath_adj = case $$p in \
175    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
176    *) f=$$p;; \
177  esac;
178am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
179am__install_max = 40
180am__nobase_strip_setup = \
181  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
182am__nobase_strip = \
183  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
184am__nobase_list = $(am__nobase_strip_setup); \
185  for p in $$list; do echo "$$p $$p"; done | \
186  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
187  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
188    if (++n[$$2] == $(am__install_max)) \
189      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
190    END { for (dir in files) print dir, files[dir] }'
191am__base_list = \
192  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
193  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
194am__uninstall_files_from_dir = { \
195  test -z "$$files" \
196    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
197    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
198         $(am__cd) "$$dir" && rm -f $$files; }; \
199  }
200am__installdirs = "$(DESTDIR)$(filesdir)"
201DATA = $(files_DATA)
202RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
203  distclean-recursive maintainer-clean-recursive
204am__recursive_targets = \
205  $(RECURSIVE_TARGETS) \
206  $(RECURSIVE_CLEAN_TARGETS) \
207  $(am__extra_recursive_targets)
208AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
209	cscope distdir dist dist-all distcheck
210am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
211# Read a list of newline-separated strings from the standard input,
212# and print each of them once, without duplicates.  Input order is
213# *not* preserved.
214am__uniquify_input = $(AWK) '\
215  BEGIN { nonempty = 0; } \
216  { items[$$0] = 1; nonempty = 1; } \
217  END { if (nonempty) { for (i in items) print i; }; } \
218'
219# Make sure the list of sources is unique.  This is necessary because,
220# e.g., the same source file might be shared among _SOURCES variables
221# for different programs/libraries.
222am__define_uniq_tagged_files = \
223  list='$(am__tagged_files)'; \
224  unique=`for i in $$list; do \
225    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
226  done | $(am__uniquify_input)`
227ETAGS = etags
228CTAGS = ctags
229CSCOPE = cscope
230DIST_SUBDIRS = src data po
231am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/ephoto.spec.in \
232	ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README TODO \
233	compile config.guess config.rpath config.sub depcomp \
234	install-sh ltmain.sh missing
235DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
236distdir = $(PACKAGE)-$(VERSION)
237top_distdir = $(distdir)
238am__remove_distdir = \
239  if test -d "$(distdir)"; then \
240    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
241      && rm -rf "$(distdir)" \
242      || { sleep 5 && rm -rf "$(distdir)"; }; \
243  else :; fi
244am__post_remove_distdir = $(am__remove_distdir)
245am__relativize = \
246  dir0=`pwd`; \
247  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
248  sed_rest='s,^[^/]*/*,,'; \
249  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
250  sed_butlast='s,/*[^/]*$$,,'; \
251  while test -n "$$dir1"; do \
252    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
253    if test "$$first" != "."; then \
254      if test "$$first" = ".."; then \
255        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
256        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
257      else \
258        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
259        if test "$$first2" = "$$first"; then \
260          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
261        else \
262          dir2="../$$dir2"; \
263        fi; \
264        dir0="$$dir0"/"$$first"; \
265      fi; \
266    fi; \
267    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
268  done; \
269  reldir="$$dir2"
270DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
271GZIP_ENV = --best
272DIST_TARGETS = dist-xz dist-gzip
273distuninstallcheck_listfiles = find . -type f -print
274am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
275  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
276distcleancheck_listfiles = find . -type f -print
277ACLOCAL = @ACLOCAL@
278AMTAR = @AMTAR@
279AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
280AUTOCONF = @AUTOCONF@
281AUTOHEADER = @AUTOHEADER@
282AUTOMAKE = @AUTOMAKE@
283AWK = @AWK@
284CC = @CC@
285CCDEPMODE = @CCDEPMODE@
286CFLAGS = @CFLAGS@
287CHECK_CFLAGS = @CHECK_CFLAGS@
288CHECK_LIBS = @CHECK_LIBS@
289CPP = @CPP@
290CPPFLAGS = @CPPFLAGS@
291CYGPATH_W = @CYGPATH_W@
292DEFS = @DEFS@
293DEPDIR = @DEPDIR@
294ECHO_C = @ECHO_C@
295ECHO_N = @ECHO_N@
296ECHO_T = @ECHO_T@
297EFL_CFLAGS = @EFL_CFLAGS@
298EFL_LIBS = @EFL_LIBS@
299EGREP = @EGREP@
300EXEEXT = @EXEEXT@
301GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
302GMSGFMT = @GMSGFMT@
303GMSGFMT_015 = @GMSGFMT_015@
304GREP = @GREP@
305INSTALL = @INSTALL@
306INSTALL_DATA = @INSTALL_DATA@
307INSTALL_PROGRAM = @INSTALL_PROGRAM@
308INSTALL_SCRIPT = @INSTALL_SCRIPT@
309INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
310INTLLIBS = @INTLLIBS@
311INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
312LDFLAGS = @LDFLAGS@
313LIBICONV = @LIBICONV@
314LIBINTL = @LIBINTL@
315LIBOBJS = @LIBOBJS@
316LIBS = @LIBS@
317LTLIBICONV = @LTLIBICONV@
318LTLIBINTL = @LTLIBINTL@
319LTLIBOBJS = @LTLIBOBJS@
320MAKEINFO = @MAKEINFO@
321MKDIR_P = @MKDIR_P@
322MSGFMT = @MSGFMT@
323MSGFMT_015 = @MSGFMT_015@
324MSGMERGE = @MSGMERGE@
325OBJEXT = @OBJEXT@
326PACKAGE = @PACKAGE@
327PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
328PACKAGE_NAME = @PACKAGE_NAME@
329PACKAGE_STRING = @PACKAGE_STRING@
330PACKAGE_TARNAME = @PACKAGE_TARNAME@
331PACKAGE_URL = @PACKAGE_URL@
332PACKAGE_VERSION = @PACKAGE_VERSION@
333PATH_SEPARATOR = @PATH_SEPARATOR@
334PKG_CONFIG = @PKG_CONFIG@
335PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
336PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
337POSUB = @POSUB@
338SET_MAKE = @SET_MAKE@
339SHELL = @SHELL@
340STRIP = @STRIP@
341USE_NLS = @USE_NLS@
342VERSION = @VERSION@
343XGETTEXT = @XGETTEXT@
344XGETTEXT_015 = @XGETTEXT_015@
345XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
346abs_builddir = @abs_builddir@
347abs_srcdir = @abs_srcdir@
348abs_top_builddir = @abs_top_builddir@
349abs_top_srcdir = @abs_top_srcdir@
350ac_ct_CC = @ac_ct_CC@
351am__include = @am__include@
352am__leading_dot = @am__leading_dot@
353am__quote = @am__quote@
354am__tar = @am__tar@
355am__untar = @am__untar@
356bindir = @bindir@
357build = @build@
358build_alias = @build_alias@
359build_cpu = @build_cpu@
360build_os = @build_os@
361build_vendor = @build_vendor@
362builddir = @builddir@
363datadir = @datadir@
364datarootdir = @datarootdir@
365docdir = @docdir@
366dvidir = @dvidir@
367edje_cc = @edje_cc@
368exec_prefix = @exec_prefix@
369have_lcov = @have_lcov@
370host = @host@
371host_alias = @host_alias@
372host_cpu = @host_cpu@
373host_os = @host_os@
374host_vendor = @host_vendor@
375htmldir = @htmldir@
376includedir = @includedir@
377infodir = @infodir@
378install_sh = @install_sh@
379libdir = @libdir@
380libexecdir = @libexecdir@
381localedir = @localedir@
382localstatedir = @localstatedir@
383mandir = @mandir@
384mkdir_p = @mkdir_p@
385oldincludedir = @oldincludedir@
386pdfdir = @pdfdir@
387prefix = @prefix@
388program_transform_name = @program_transform_name@
389psdir = @psdir@
390sbindir = @sbindir@
391sharedstatedir = @sharedstatedir@
392srcdir = @srcdir@
393sysconfdir = @sysconfdir@
394target_alias = @target_alias@
395top_build_prefix = @top_build_prefix@
396top_builddir = @top_builddir@
397top_srcdir = @top_srcdir@
398MAINTAINERCLEANFILES = ABOUT-NLS* Makefile.in \
399	$(PACKAGE_TARNAME)-$PACKAGE_VERSION).tar.gz \
400	$(PACKAGE_TARNAME)-$PACKAGE_VERSION).tar.xz acconfig.h \
401	aclocal.m4 compile config.guess config.h.in config.rpath \
402	config.sub configure depcomp install-sh ltconfig ltmain.sh \
403	missing mkinstalldirs stamp-h.in stamp-h $(am__append_1)
404
405# no idea why this is required, it should not be:
406@HAVE_PO_TRUE@DISTCLEANFILES = po/stamp-po
407SUBDIRS = src data $(am__append_2)
408EXTRA_DIST = README AUTHORS COPYING autogen.sh ephoto.spec
409ACLOCAL_AMFLAGS = -I m4
410filesdir = $(datadir)/ephoto/
411files_DATA = AUTHORS COPYING
412all: all-recursive
413
414.SUFFIXES:
415am--refresh: Makefile
416	@:
417$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
418	@for dep in $?; do \
419	  case '$(am__configure_deps)' in \
420	    *$$dep*) \
421	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
422	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
423		&& exit 0; \
424	      exit 1;; \
425	  esac; \
426	done; \
427	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
428	$(am__cd) $(top_srcdir) && \
429	  $(AUTOMAKE) --gnu Makefile
430Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
431	@case '$?' in \
432	  *config.status*) \
433	    echo ' $(SHELL) ./config.status'; \
434	    $(SHELL) ./config.status;; \
435	  *) \
436	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
437	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
438	esac;
439
440$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
441	$(SHELL) ./config.status --recheck
442
443$(top_srcdir)/configure:  $(am__configure_deps)
444	$(am__cd) $(srcdir) && $(AUTOCONF)
445$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
446	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
447$(am__aclocal_m4_deps):
448ephoto.spec: $(top_builddir)/config.status $(srcdir)/ephoto.spec.in
449	cd $(top_builddir) && $(SHELL) ./config.status $@
450install-filesDATA: $(files_DATA)
451	@$(NORMAL_INSTALL)
452	@list='$(files_DATA)'; test -n "$(filesdir)" || list=; \
453	if test -n "$$list"; then \
454	  echo " $(MKDIR_P) '$(DESTDIR)$(filesdir)'"; \
455	  $(MKDIR_P) "$(DESTDIR)$(filesdir)" || exit 1; \
456	fi; \
457	for p in $$list; do \
458	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
459	  echo "$$d$$p"; \
460	done | $(am__base_list) | \
461	while read files; do \
462	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(filesdir)'"; \
463	  $(INSTALL_DATA) $$files "$(DESTDIR)$(filesdir)" || exit $$?; \
464	done
465
466uninstall-filesDATA:
467	@$(NORMAL_UNINSTALL)
468	@list='$(files_DATA)'; test -n "$(filesdir)" || list=; \
469	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
470	dir='$(DESTDIR)$(filesdir)'; $(am__uninstall_files_from_dir)
471
472# This directory's subdirectories are mostly independent; you can cd
473# into them and run 'make' without going through this Makefile.
474# To change the values of 'make' variables: instead of editing Makefiles,
475# (1) if the variable is set in 'config.status', edit 'config.status'
476#     (which will cause the Makefiles to be regenerated when you run 'make');
477# (2) otherwise, pass the desired values on the 'make' command line.
478$(am__recursive_targets):
479	@fail=; \
480	if $(am__make_keepgoing); then \
481	  failcom='fail=yes'; \
482	else \
483	  failcom='exit 1'; \
484	fi; \
485	dot_seen=no; \
486	target=`echo $@ | sed s/-recursive//`; \
487	case "$@" in \
488	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
489	  *) list='$(SUBDIRS)' ;; \
490	esac; \
491	for subdir in $$list; do \
492	  echo "Making $$target in $$subdir"; \
493	  if test "$$subdir" = "."; then \
494	    dot_seen=yes; \
495	    local_target="$$target-am"; \
496	  else \
497	    local_target="$$target"; \
498	  fi; \
499	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
500	  || eval $$failcom; \
501	done; \
502	if test "$$dot_seen" = "no"; then \
503	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
504	fi; test -z "$$fail"
505
506ID: $(am__tagged_files)
507	$(am__define_uniq_tagged_files); mkid -fID $$unique
508tags: tags-recursive
509TAGS: tags
510
511tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
512	set x; \
513	here=`pwd`; \
514	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
515	  include_option=--etags-include; \
516	  empty_fix=.; \
517	else \
518	  include_option=--include; \
519	  empty_fix=; \
520	fi; \
521	list='$(SUBDIRS)'; for subdir in $$list; do \
522	  if test "$$subdir" = .; then :; else \
523	    test ! -f $$subdir/TAGS || \
524	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
525	  fi; \
526	done; \
527	$(am__define_uniq_tagged_files); \
528	shift; \
529	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
530	  test -n "$$unique" || unique=$$empty_fix; \
531	  if test $$# -gt 0; then \
532	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
533	      "$$@" $$unique; \
534	  else \
535	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
536	      $$unique; \
537	  fi; \
538	fi
539ctags: ctags-recursive
540
541CTAGS: ctags
542ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
543	$(am__define_uniq_tagged_files); \
544	test -z "$(CTAGS_ARGS)$$unique" \
545	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
546	     $$unique
547
548GTAGS:
549	here=`$(am__cd) $(top_builddir) && pwd` \
550	  && $(am__cd) $(top_srcdir) \
551	  && gtags -i $(GTAGS_ARGS) "$$here"
552cscope: cscope.files
553	test ! -s cscope.files \
554	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
555clean-cscope:
556	-rm -f cscope.files
557cscope.files: clean-cscope cscopelist
558cscopelist: cscopelist-recursive
559
560cscopelist-am: $(am__tagged_files)
561	list='$(am__tagged_files)'; \
562	case "$(srcdir)" in \
563	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
564	  *) sdir=$(subdir)/$(srcdir) ;; \
565	esac; \
566	for i in $$list; do \
567	  if test -f "$$i"; then \
568	    echo "$(subdir)/$$i"; \
569	  else \
570	    echo "$$sdir/$$i"; \
571	  fi; \
572	done >> $(top_builddir)/cscope.files
573
574distclean-tags:
575	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
576	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
577
578distdir: $(DISTFILES)
579	$(am__remove_distdir)
580	test -d "$(distdir)" || mkdir "$(distdir)"
581	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
582	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
583	list='$(DISTFILES)'; \
584	  dist_files=`for file in $$list; do echo $$file; done | \
585	  sed -e "s|^$$srcdirstrip/||;t" \
586	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
587	case $$dist_files in \
588	  */*) $(MKDIR_P) `echo "$$dist_files" | \
589			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
590			   sort -u` ;; \
591	esac; \
592	for file in $$dist_files; do \
593	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
594	  if test -d $$d/$$file; then \
595	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
596	    if test -d "$(distdir)/$$file"; then \
597	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
598	    fi; \
599	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
600	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
601	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
602	    fi; \
603	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
604	  else \
605	    test -f "$(distdir)/$$file" \
606	    || cp -p $$d/$$file "$(distdir)/$$file" \
607	    || exit 1; \
608	  fi; \
609	done
610	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
611	  if test "$$subdir" = .; then :; else \
612	    $(am__make_dryrun) \
613	      || test -d "$(distdir)/$$subdir" \
614	      || $(MKDIR_P) "$(distdir)/$$subdir" \
615	      || exit 1; \
616	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
617	    $(am__relativize); \
618	    new_distdir=$$reldir; \
619	    dir1=$$subdir; dir2="$(top_distdir)"; \
620	    $(am__relativize); \
621	    new_top_distdir=$$reldir; \
622	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
623	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
624	    ($(am__cd) $$subdir && \
625	      $(MAKE) $(AM_MAKEFLAGS) \
626	        top_distdir="$$new_top_distdir" \
627	        distdir="$$new_distdir" \
628		am__remove_distdir=: \
629		am__skip_length_check=: \
630		am__skip_mode_fix=: \
631	        distdir) \
632	      || exit 1; \
633	  fi; \
634	done
635	-test -n "$(am__skip_mode_fix)" \
636	|| find "$(distdir)" -type d ! -perm -755 \
637		-exec chmod u+rwx,go+rx {} \; -o \
638	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
639	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
640	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
641	|| chmod -R a+r "$(distdir)"
642dist-gzip: distdir
643	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
644	$(am__post_remove_distdir)
645
646dist-bzip2: distdir
647	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
648	$(am__post_remove_distdir)
649
650dist-lzip: distdir
651	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
652	$(am__post_remove_distdir)
653dist-xz: distdir
654	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
655	$(am__post_remove_distdir)
656
657dist-tarZ: distdir
658	@echo WARNING: "Support for distribution archives compressed with" \
659		       "legacy program 'compress' is deprecated." >&2
660	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
661	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
662	$(am__post_remove_distdir)
663
664dist-shar: distdir
665	@echo WARNING: "Support for shar distribution archives is" \
666	               "deprecated." >&2
667	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
668	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
669	$(am__post_remove_distdir)
670
671dist-zip: distdir
672	-rm -f $(distdir).zip
673	zip -rq $(distdir).zip $(distdir)
674	$(am__post_remove_distdir)
675
676dist dist-all:
677	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
678	$(am__post_remove_distdir)
679
680# This target untars the dist file and tries a VPATH configuration.  Then
681# it guarantees that the distribution is self-contained by making another
682# tarfile.
683distcheck: dist
684	case '$(DIST_ARCHIVES)' in \
685	*.tar.gz*) \
686	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
687	*.tar.bz2*) \
688	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
689	*.tar.lz*) \
690	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
691	*.tar.xz*) \
692	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
693	*.tar.Z*) \
694	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
695	*.shar.gz*) \
696	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
697	*.zip*) \
698	  unzip $(distdir).zip ;;\
699	esac
700	chmod -R a-w $(distdir)
701	chmod u+w $(distdir)
702	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
703	chmod a-w $(distdir)
704	test -d $(distdir)/_build || exit 0; \
705	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
706	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
707	  && am__cwd=`pwd` \
708	  && $(am__cd) $(distdir)/_build/sub \
709	  && ../../configure \
710	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
711	    $(DISTCHECK_CONFIGURE_FLAGS) \
712	    --srcdir=../.. --prefix="$$dc_install_base" \
713	  && $(MAKE) $(AM_MAKEFLAGS) \
714	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
715	  && $(MAKE) $(AM_MAKEFLAGS) check \
716	  && $(MAKE) $(AM_MAKEFLAGS) install \
717	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
718	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
719	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
720	        distuninstallcheck \
721	  && chmod -R a-w "$$dc_install_base" \
722	  && ({ \
723	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
724	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
725	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
726	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
727	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
728	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
729	  && rm -rf "$$dc_destdir" \
730	  && $(MAKE) $(AM_MAKEFLAGS) dist \
731	  && rm -rf $(DIST_ARCHIVES) \
732	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
733	  && cd "$$am__cwd" \
734	  || exit 1
735	$(am__post_remove_distdir)
736	@(echo "$(distdir) archives ready for distribution: "; \
737	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
738	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
739distuninstallcheck:
740	@test -n '$(distuninstallcheck_dir)' || { \
741	  echo 'ERROR: trying to run $@ with an empty' \
742	       '$$(distuninstallcheck_dir)' >&2; \
743	  exit 1; \
744	}; \
745	$(am__cd) '$(distuninstallcheck_dir)' || { \
746	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
747	  exit 1; \
748	}; \
749	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
750	   || { echo "ERROR: files left after uninstall:" ; \
751	        if test -n "$(DESTDIR)"; then \
752	          echo "  (check DESTDIR support)"; \
753	        fi ; \
754	        $(distuninstallcheck_listfiles) ; \
755	        exit 1; } >&2
756distcleancheck: distclean
757	@if test '$(srcdir)' = . ; then \
758	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
759	  exit 1 ; \
760	fi
761	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
762	  || { echo "ERROR: files left in build directory after distclean:" ; \
763	       $(distcleancheck_listfiles) ; \
764	       exit 1; } >&2
765check-am: all-am
766check: check-recursive
767all-am: Makefile $(DATA)
768installdirs: installdirs-recursive
769installdirs-am:
770	for dir in "$(DESTDIR)$(filesdir)"; do \
771	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
772	done
773install: install-recursive
774install-exec: install-exec-recursive
775install-data: install-data-recursive
776uninstall: uninstall-recursive
777
778install-am: all-am
779	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
780
781installcheck: installcheck-recursive
782install-strip:
783	if test -z '$(STRIP)'; then \
784	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
785	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
786	      install; \
787	else \
788	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
789	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
790	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
791	fi
792mostlyclean-generic:
793
794clean-generic:
795
796distclean-generic:
797	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
798	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
799	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
800
801maintainer-clean-generic:
802	@echo "This command is intended for maintainers to use"
803	@echo "it deletes files that may require special tools to rebuild."
804	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
805clean: clean-recursive
806
807clean-am: clean-generic mostlyclean-am
808
809distclean: distclean-recursive
810	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
811	-rm -f Makefile
812distclean-am: clean-am distclean-generic distclean-tags
813
814dvi: dvi-recursive
815
816dvi-am:
817
818html: html-recursive
819
820html-am:
821
822info: info-recursive
823
824info-am:
825
826install-data-am: install-filesDATA
827
828install-dvi: install-dvi-recursive
829
830install-dvi-am:
831
832install-exec-am:
833
834install-html: install-html-recursive
835
836install-html-am:
837
838install-info: install-info-recursive
839
840install-info-am:
841
842install-man:
843
844install-pdf: install-pdf-recursive
845
846install-pdf-am:
847
848install-ps: install-ps-recursive
849
850install-ps-am:
851
852installcheck-am:
853
854maintainer-clean: maintainer-clean-recursive
855	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
856	-rm -rf $(top_srcdir)/autom4te.cache
857	-rm -f Makefile
858maintainer-clean-am: distclean-am maintainer-clean-generic
859
860mostlyclean: mostlyclean-recursive
861
862mostlyclean-am: mostlyclean-generic
863
864pdf: pdf-recursive
865
866pdf-am:
867
868ps: ps-recursive
869
870ps-am:
871
872uninstall-am: uninstall-filesDATA
873
874.MAKE: $(am__recursive_targets) install-am install-strip
875
876.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
877	am--refresh check check-am clean clean-cscope clean-generic \
878	cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
879	dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
880	distcheck distclean distclean-generic distclean-tags \
881	distcleancheck distdir distuninstallcheck dvi dvi-am html \
882	html-am info info-am install install-am install-data \
883	install-data-am install-dvi install-dvi-am install-exec \
884	install-exec-am install-filesDATA install-html install-html-am \
885	install-info install-info-am install-man install-pdf \
886	install-pdf-am install-ps install-ps-am install-strip \
887	installcheck installcheck-am installdirs installdirs-am \
888	maintainer-clean maintainer-clean-generic mostlyclean \
889	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
890	uninstall-am uninstall-filesDATA
891
892.PRECIOUS: Makefile
893
894
895# Tell versions [3.59,3.63) of GNU make to not export all variables.
896# Otherwise a system limit (for SysV at least) may be exceeded.
897.NOEXPORT:
898