1 /* Definitions of target machine for GNU compiler, for IBM RS/6000. 2 Copyright (C) 1992-2021 Free Software Foundation, Inc. 3 Contributed by Richard Kenner (kenner@vlsi1.ultra.nyu.edu) 4 5 This file is part of GCC. 6 7 GCC is free software; you can redistribute it and/or modify it 8 under the terms of the GNU General Public License as published 9 by the Free Software Foundation; either version 3, or (at your 10 option) any later version. 11 12 GCC is distributed in the hope that it will be useful, but WITHOUT 13 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 14 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public 15 License for more details. 16 17 Under Section 7 of GPL version 3, you are granted additional 18 permissions described in the GCC Runtime Library Exception, version 19 3.1, as published by the Free Software Foundation. 20 21 You should have received a copy of the GNU General Public License and 22 a copy of the GCC Runtime Library Exception along with this program; 23 see the files COPYING3 and COPYING.RUNTIME respectively. If not, see 24 <http://www.gnu.org/licenses/>. */ 25 26 /* Note that some other tm.h files include this one and then override 27 many of the definitions. */ 28 29 #ifndef RS6000_OPTS_H 30 #include "config/rs6000/rs6000-opts.h" 31 #endif 32 33 /* 128-bit floating point precision values. */ 34 #ifndef RS6000_MODES_H 35 #include "config/rs6000/rs6000-modes.h" 36 #endif 37 38 /* Definitions for the object file format. These are set at 39 compile-time. */ 40 41 #define OBJECT_XCOFF 1 42 #define OBJECT_ELF 2 43 #define OBJECT_MACHO 4 44 45 #define TARGET_ELF (TARGET_OBJECT_FORMAT == OBJECT_ELF) 46 #define TARGET_XCOFF (TARGET_OBJECT_FORMAT == OBJECT_XCOFF) 47 #define TARGET_MACHO (TARGET_OBJECT_FORMAT == OBJECT_MACHO) 48 49 #ifndef TARGET_AIX 50 #define TARGET_AIX 0 51 #endif 52 53 #ifndef TARGET_AIX_OS 54 #define TARGET_AIX_OS 0 55 #endif 56 57 /* Turn off TOC support if pc-relative addressing is used. */ 58 #define TARGET_TOC (TARGET_HAS_TOC && !TARGET_PCREL) 59 60 /* On 32-bit systems without a TOC or pc-relative addressing, we need to use 61 ADDIS/ADDI to load up the address of a symbol. */ 62 #define TARGET_NO_TOC_OR_PCREL (!TARGET_HAS_TOC && !TARGET_PCREL) 63 64 /* Control whether function entry points use a "dot" symbol when 65 ABI_AIX. */ 66 #define DOT_SYMBOLS 1 67 68 /* Default string to use for cpu if not specified. */ 69 #ifndef TARGET_CPU_DEFAULT 70 #define TARGET_CPU_DEFAULT ((char *)0) 71 #endif 72 73 /* If configured for PPC405, support PPC405CR Erratum77. */ 74 #ifdef CONFIG_PPC405CR 75 #define PPC405_ERRATUM77 (rs6000_cpu == PROCESSOR_PPC405) 76 #else 77 #define PPC405_ERRATUM77 0 78 #endif 79 80 #ifndef SUBTARGET_DRIVER_SELF_SPECS 81 # define SUBTARGET_DRIVER_SELF_SPECS "" 82 #endif 83 84 /* Only for use in the testsuite: -mdejagnu-cpu= simply overrides -mcpu=. 85 With older versions of Dejagnu the command line arguments you set in 86 RUNTESTFLAGS override those set in the testcases; with this option, 87 the testcase will always win. Ditto for -mdejagnu-tune=. */ 88 #define DRIVER_SELF_SPECS \ 89 "%{mdejagnu-cpu=*: %<mcpu=* -mcpu=%*}", \ 90 "%{mdejagnu-tune=*: %<mtune=* -mtune=%*}", \ 91 "%{mdejagnu-*: %<mdejagnu-*}", \ 92 SUBTARGET_DRIVER_SELF_SPECS 93 94 #if CHECKING_P 95 #define ASM_OPT_ANY "" 96 #else 97 #define ASM_OPT_ANY " -many" 98 #endif 99 100 /* Common ASM definitions used by ASM_SPEC among the various targets for 101 handling -mcpu=xxx switches. There is a parallel list in driver-rs6000.c to 102 provide the default assembler options if the user uses -mcpu=native, so if 103 you make changes here, make them also there. PR63177: Do not pass -mpower8 104 to the assembler if -mpower9-vector was also used. */ 105 #define ASM_CPU_SPEC \ 106 "%{mcpu=native: %(asm_cpu_native); \ 107 mcpu=power10: -mpower10; \ 108 mcpu=power9: -mpower9; \ 109 mcpu=power8|mcpu=powerpc64le: %{mpower9-vector: -mpower9;: -mpower8}; \ 110 mcpu=power7: -mpower7; \ 111 mcpu=power6x: -mpower6 %{!mvsx:%{!maltivec:-maltivec}}; \ 112 mcpu=power6: -mpower6 %{!mvsx:%{!maltivec:-maltivec}}; \ 113 mcpu=power5+: -mpower5; \ 114 mcpu=power5: -mpower5; \ 115 mcpu=power4: -mpower4; \ 116 mcpu=power3: -mppc64; \ 117 mcpu=powerpc: -mppc; \ 118 mcpu=powerpc64: -mppc64; \ 119 mcpu=a2: -ma2; \ 120 mcpu=cell: -mcell; \ 121 mcpu=rs64: -mppc64; \ 122 mcpu=401: -mppc; \ 123 mcpu=403: -m403; \ 124 mcpu=405: -m405; \ 125 mcpu=405fp: -m405; \ 126 mcpu=440: -m440; \ 127 mcpu=440fp: -m440; \ 128 mcpu=464: -m440; \ 129 mcpu=464fp: -m440; \ 130 mcpu=476: -m476; \ 131 mcpu=476fp: -m476; \ 132 mcpu=505: -mppc; \ 133 mcpu=601: -m601; \ 134 mcpu=602: -mppc; \ 135 mcpu=603: -mppc; \ 136 mcpu=603e: -mppc; \ 137 mcpu=ec603e: -mppc; \ 138 mcpu=604: -mppc; \ 139 mcpu=604e: -mppc; \ 140 mcpu=620: -mppc64; \ 141 mcpu=630: -mppc64; \ 142 mcpu=740: -mppc; \ 143 mcpu=750: -mppc; \ 144 mcpu=G3: -mppc; \ 145 mcpu=7400: -mppc %{!mvsx:%{!maltivec:-maltivec}}; \ 146 mcpu=7450: -mppc %{!mvsx:%{!maltivec:-maltivec}}; \ 147 mcpu=G4: -mppc %{!mvsx:%{!maltivec:-maltivec}}; \ 148 mcpu=801: -mppc; \ 149 mcpu=821: -mppc; \ 150 mcpu=823: -mppc; \ 151 mcpu=860: -mppc; \ 152 mcpu=970: -mpower4 %{!mvsx:%{!maltivec:-maltivec}}; \ 153 mcpu=G5: -mpower4 %{!mvsx:%{!maltivec:-maltivec}}; \ 154 mcpu=8540: -me500; \ 155 mcpu=8548: -me500; \ 156 mcpu=e300c2: -me300; \ 157 mcpu=e300c3: -me300; \ 158 mcpu=e500mc: -me500mc; \ 159 mcpu=e500mc64: -me500mc64; \ 160 mcpu=e5500: -me5500; \ 161 mcpu=e6500: -me6500; \ 162 mcpu=titan: -mtitan; \ 163 !mcpu*: %{mpower9-vector: -mpower9; \ 164 mpower8-vector|mcrypto|mdirect-move|mhtm: -mpower8; \ 165 mvsx: -mpower7; \ 166 mpowerpc64: -mppc64;: %(asm_default)}; \ 167 :%eMissing -mcpu option in ASM_CPU_SPEC?\n} \ 168 %{mvsx: -mvsx -maltivec; maltivec: -maltivec}" \ 169 ASM_OPT_ANY 170 171 #define CPP_DEFAULT_SPEC "" 172 173 #define ASM_DEFAULT_SPEC "" 174 #define ASM_DEFAULT_EXTRA "" 175 176 /* This macro defines names of additional specifications to put in the specs 177 that can be used in various specifications like CC1_SPEC. Its definition 178 is an initializer with a subgrouping for each command option. 179 180 Each subgrouping contains a string constant, that defines the 181 specification name, and a string constant that used by the GCC driver 182 program. 183 184 Do not define this macro if it does not need to do anything. */ 185 186 #define SUBTARGET_EXTRA_SPECS 187 188 #define EXTRA_SPECS \ 189 { "cpp_default", CPP_DEFAULT_SPEC }, \ 190 { "asm_cpu", ASM_CPU_SPEC }, \ 191 { "asm_cpu_native", ASM_CPU_NATIVE_SPEC }, \ 192 { "asm_default", ASM_DEFAULT_SPEC ASM_DEFAULT_EXTRA }, \ 193 { "cc1_cpu", CC1_CPU_SPEC }, \ 194 SUBTARGET_EXTRA_SPECS 195 196 /* -mcpu=native handling only makes sense with compiler running on 197 an PowerPC chip. If changing this condition, also change 198 the condition in driver-rs6000.c. */ 199 #if defined(__powerpc__) || defined(__POWERPC__) || defined(_AIX) 200 /* In driver-rs6000.c. */ 201 extern const char *host_detect_local_cpu (int argc, const char **argv); 202 #define EXTRA_SPEC_FUNCTIONS \ 203 { "local_cpu_detect", host_detect_local_cpu }, 204 #define HAVE_LOCAL_CPU_DETECT 205 #define ASM_CPU_NATIVE_SPEC "%:local_cpu_detect(asm)" 206 207 #else 208 #define ASM_CPU_NATIVE_SPEC "%(asm_default)" 209 #endif 210 211 #ifndef CC1_CPU_SPEC 212 #ifdef HAVE_LOCAL_CPU_DETECT 213 #define CC1_CPU_SPEC \ 214 "%{mcpu=native:%<mcpu=native %:local_cpu_detect(cpu)} \ 215 %{mtune=native:%<mtune=native %:local_cpu_detect(tune)}" 216 #else 217 #define CC1_CPU_SPEC "" 218 #endif 219 #endif 220 221 /* Architecture type. */ 222 223 /* Define TARGET_MFCRF if the target assembler does not support the 224 optional field operand for mfcr. */ 225 226 #ifndef HAVE_AS_MFCRF 227 #undef TARGET_MFCRF 228 #define TARGET_MFCRF 0 229 #endif 230 231 #ifndef TARGET_SECURE_PLT 232 #define TARGET_SECURE_PLT 0 233 #endif 234 235 #ifndef TARGET_CMODEL 236 #define TARGET_CMODEL CMODEL_SMALL 237 #endif 238 239 #define TARGET_32BIT (! TARGET_64BIT) 240 241 #ifndef HAVE_AS_TLS 242 #define HAVE_AS_TLS 0 243 #endif 244 245 #ifndef HAVE_AS_PLTSEQ 246 #define HAVE_AS_PLTSEQ 0 247 #endif 248 249 #ifndef TARGET_PLTSEQ 250 #define TARGET_PLTSEQ 0 251 #endif 252 253 #ifndef TARGET_LINK_STACK 254 #define TARGET_LINK_STACK 0 255 #endif 256 257 #ifndef SET_TARGET_LINK_STACK 258 #define SET_TARGET_LINK_STACK(X) do { } while (0) 259 #endif 260 261 #ifndef TARGET_FLOAT128_ENABLE_TYPE 262 #define TARGET_FLOAT128_ENABLE_TYPE 0 263 #endif 264 265 /* Return 1 for a symbol ref for a thread-local storage symbol. */ 266 #define RS6000_SYMBOL_REF_TLS_P(RTX) \ 267 (SYMBOL_REF_P (RTX) && SYMBOL_REF_TLS_MODEL (RTX) != 0) 268 269 #ifdef IN_LIBGCC2 270 /* For libgcc2 we make sure this is a compile time constant */ 271 #if defined (__64BIT__) || defined (__powerpc64__) || defined (__ppc64__) 272 #undef TARGET_POWERPC64 273 #define TARGET_POWERPC64 1 274 #else 275 #undef TARGET_POWERPC64 276 #define TARGET_POWERPC64 0 277 #endif 278 #else 279 /* The option machinery will define this. */ 280 #endif 281 282 #define TARGET_DEFAULT (MASK_MULTIPLE) 283 284 /* Define generic processor types based upon current deployment. */ 285 #define PROCESSOR_COMMON PROCESSOR_PPC601 286 #define PROCESSOR_POWERPC PROCESSOR_PPC604 287 #define PROCESSOR_POWERPC64 PROCESSOR_RS64A 288 289 /* Define the default processor. This is overridden by other tm.h files. */ 290 #define PROCESSOR_DEFAULT PROCESSOR_PPC603 291 #define PROCESSOR_DEFAULT64 PROCESSOR_RS64A 292 293 /* Specify the dialect of assembler to use. Only new mnemonics are supported 294 starting with GCC 4.8, i.e. just one dialect, but for backwards 295 compatibility with older inline asm ASSEMBLER_DIALECT needs to be 296 defined. */ 297 #define ASSEMBLER_DIALECT 1 298 299 /* Debug support */ 300 #define MASK_DEBUG_STACK 0x01 /* debug stack applications */ 301 #define MASK_DEBUG_ARG 0x02 /* debug argument handling */ 302 #define MASK_DEBUG_REG 0x04 /* debug register handling */ 303 #define MASK_DEBUG_ADDR 0x08 /* debug memory addressing */ 304 #define MASK_DEBUG_COST 0x10 /* debug rtx codes */ 305 #define MASK_DEBUG_TARGET 0x20 /* debug target attribute/pragma */ 306 #define MASK_DEBUG_BUILTIN 0x40 /* debug builtins */ 307 #define MASK_DEBUG_ALL (MASK_DEBUG_STACK \ 308 | MASK_DEBUG_ARG \ 309 | MASK_DEBUG_REG \ 310 | MASK_DEBUG_ADDR \ 311 | MASK_DEBUG_COST \ 312 | MASK_DEBUG_TARGET \ 313 | MASK_DEBUG_BUILTIN) 314 315 #define TARGET_DEBUG_STACK (rs6000_debug & MASK_DEBUG_STACK) 316 #define TARGET_DEBUG_ARG (rs6000_debug & MASK_DEBUG_ARG) 317 #define TARGET_DEBUG_REG (rs6000_debug & MASK_DEBUG_REG) 318 #define TARGET_DEBUG_ADDR (rs6000_debug & MASK_DEBUG_ADDR) 319 #define TARGET_DEBUG_COST (rs6000_debug & MASK_DEBUG_COST) 320 #define TARGET_DEBUG_TARGET (rs6000_debug & MASK_DEBUG_TARGET) 321 #define TARGET_DEBUG_BUILTIN (rs6000_debug & MASK_DEBUG_BUILTIN) 322 323 /* Helper macros for TFmode. Quad floating point (TFmode) can be either IBM 324 long double format that uses a pair of doubles, or IEEE 128-bit floating 325 point. KFmode was added as a way to represent IEEE 128-bit floating point, 326 even if the default for long double is the IBM long double format. 327 Similarly IFmode is the IBM long double format even if the default is IEEE 328 128-bit. Don't allow IFmode if -msoft-float. */ 329 #define FLOAT128_IEEE_P(MODE) \ 330 ((TARGET_IEEEQUAD && TARGET_LONG_DOUBLE_128 \ 331 && ((MODE) == TFmode || (MODE) == TCmode)) \ 332 || ((MODE) == KFmode) || ((MODE) == KCmode)) 333 334 #define FLOAT128_IBM_P(MODE) \ 335 ((!TARGET_IEEEQUAD && TARGET_LONG_DOUBLE_128 \ 336 && ((MODE) == TFmode || (MODE) == TCmode)) \ 337 || (TARGET_HARD_FLOAT && ((MODE) == IFmode || (MODE) == ICmode))) 338 339 /* Helper macros to say whether a 128-bit floating point type can go in a 340 single vector register, or whether it needs paired scalar values. */ 341 #define FLOAT128_VECTOR_P(MODE) (TARGET_FLOAT128_TYPE && FLOAT128_IEEE_P (MODE)) 342 343 #define FLOAT128_2REG_P(MODE) \ 344 (FLOAT128_IBM_P (MODE) \ 345 || ((MODE) == TDmode) \ 346 || (!TARGET_FLOAT128_TYPE && FLOAT128_IEEE_P (MODE))) 347 348 /* Return true for floating point that does not use a vector register. */ 349 #define SCALAR_FLOAT_MODE_NOT_VECTOR_P(MODE) \ 350 (SCALAR_FLOAT_MODE_P (MODE) && !FLOAT128_VECTOR_P (MODE)) 351 352 /* Describe the vector unit used for arithmetic operations. */ 353 extern enum rs6000_vector rs6000_vector_unit[]; 354 355 #define VECTOR_UNIT_NONE_P(MODE) \ 356 (rs6000_vector_unit[(MODE)] == VECTOR_NONE) 357 358 #define VECTOR_UNIT_VSX_P(MODE) \ 359 (rs6000_vector_unit[(MODE)] == VECTOR_VSX) 360 361 #define VECTOR_UNIT_P8_VECTOR_P(MODE) \ 362 (rs6000_vector_unit[(MODE)] == VECTOR_P8_VECTOR) 363 364 #define VECTOR_UNIT_ALTIVEC_P(MODE) \ 365 (rs6000_vector_unit[(MODE)] == VECTOR_ALTIVEC) 366 367 #define VECTOR_UNIT_VSX_OR_P8_VECTOR_P(MODE) \ 368 (IN_RANGE ((int)rs6000_vector_unit[(MODE)], \ 369 (int)VECTOR_VSX, \ 370 (int)VECTOR_P8_VECTOR)) 371 372 /* VECTOR_UNIT_ALTIVEC_OR_VSX_P is used in places where we are using either 373 altivec (VMX) or VSX vector instructions. P8 vector support is upwards 374 compatible, so allow it as well, rather than changing all of the uses of the 375 macro. */ 376 #define VECTOR_UNIT_ALTIVEC_OR_VSX_P(MODE) \ 377 (IN_RANGE ((int)rs6000_vector_unit[(MODE)], \ 378 (int)VECTOR_ALTIVEC, \ 379 (int)VECTOR_P8_VECTOR)) 380 381 /* Describe whether to use VSX loads or Altivec loads. For now, just use the 382 same unit as the vector unit we are using, but we may want to migrate to 383 using VSX style loads even for types handled by altivec. */ 384 extern enum rs6000_vector rs6000_vector_mem[]; 385 386 #define VECTOR_MEM_NONE_P(MODE) \ 387 (rs6000_vector_mem[(MODE)] == VECTOR_NONE) 388 389 #define VECTOR_MEM_VSX_P(MODE) \ 390 (rs6000_vector_mem[(MODE)] == VECTOR_VSX) 391 392 #define VECTOR_MEM_P8_VECTOR_P(MODE) \ 393 (rs6000_vector_mem[(MODE)] == VECTOR_VSX) 394 395 #define VECTOR_MEM_ALTIVEC_P(MODE) \ 396 (rs6000_vector_mem[(MODE)] == VECTOR_ALTIVEC) 397 398 #define VECTOR_MEM_VSX_OR_P8_VECTOR_P(MODE) \ 399 (IN_RANGE ((int)rs6000_vector_mem[(MODE)], \ 400 (int)VECTOR_VSX, \ 401 (int)VECTOR_P8_VECTOR)) 402 403 #define VECTOR_MEM_ALTIVEC_OR_VSX_P(MODE) \ 404 (IN_RANGE ((int)rs6000_vector_mem[(MODE)], \ 405 (int)VECTOR_ALTIVEC, \ 406 (int)VECTOR_P8_VECTOR)) 407 408 /* Return the alignment of a given vector type, which is set based on the 409 vector unit use. VSX for instance can load 32 or 64 bit aligned words 410 without problems, while Altivec requires 128-bit aligned vectors. */ 411 extern int rs6000_vector_align[]; 412 413 #define VECTOR_ALIGN(MODE) \ 414 ((rs6000_vector_align[(MODE)] != 0) \ 415 ? rs6000_vector_align[(MODE)] \ 416 : (int)GET_MODE_BITSIZE ((MODE))) 417 418 /* Element number of the 64-bit value in a 128-bit vector that can be accessed 419 with scalar instructions. */ 420 #define VECTOR_ELEMENT_SCALAR_64BIT ((BYTES_BIG_ENDIAN) ? 0 : 1) 421 422 /* Element number of the 64-bit value in a 128-bit vector that can be accessed 423 with the ISA 3.0 MFVSRLD instructions. */ 424 #define VECTOR_ELEMENT_MFVSRLD_64BIT ((BYTES_BIG_ENDIAN) ? 1 : 0) 425 426 /* Alignment options for fields in structures for sub-targets following 427 AIX-like ABI. 428 ALIGN_POWER word-aligns FP doubles (default AIX ABI). 429 ALIGN_NATURAL doubleword-aligns FP doubles (align to object size). 430 431 Override the macro definitions when compiling libobjc to avoid undefined 432 reference to rs6000_alignment_flags due to library's use of GCC alignment 433 macros which use the macros below. */ 434 435 #ifndef IN_TARGET_LIBS 436 #define MASK_ALIGN_POWER 0x00000000 437 #define MASK_ALIGN_NATURAL 0x00000001 438 #define TARGET_ALIGN_NATURAL (rs6000_alignment_flags & MASK_ALIGN_NATURAL) 439 #else 440 #define TARGET_ALIGN_NATURAL 0 441 #endif 442 443 /* We use values 126..128 to pick the appropriate long double type (IFmode, 444 KFmode, TFmode). */ 445 #define TARGET_LONG_DOUBLE_128 (rs6000_long_double_type_size > 64) 446 #define TARGET_IEEEQUAD rs6000_ieeequad 447 #define TARGET_ALTIVEC_ABI rs6000_altivec_abi 448 #define TARGET_LDBRX (TARGET_POPCNTD || rs6000_cpu == PROCESSOR_CELL) 449 450 /* ISA 2.01 allowed FCFID to be done in 32-bit, previously it was 64-bit only. 451 Enable 32-bit fcfid's on any of the switches for newer ISA machines. */ 452 #define TARGET_FCFID (TARGET_POWERPC64 \ 453 || TARGET_PPC_GPOPT /* 970/power4 */ \ 454 || TARGET_POPCNTB /* ISA 2.02 */ \ 455 || TARGET_CMPB /* ISA 2.05 */ \ 456 || TARGET_POPCNTD) /* ISA 2.06 */ 457 458 #define TARGET_FCTIDZ TARGET_FCFID 459 #define TARGET_STFIWX TARGET_PPC_GFXOPT 460 #define TARGET_LFIWAX TARGET_CMPB 461 #define TARGET_LFIWZX TARGET_POPCNTD 462 #define TARGET_FCFIDS TARGET_POPCNTD 463 #define TARGET_FCFIDU TARGET_POPCNTD 464 #define TARGET_FCFIDUS TARGET_POPCNTD 465 #define TARGET_FCTIDUZ TARGET_POPCNTD 466 #define TARGET_FCTIWUZ TARGET_POPCNTD 467 #define TARGET_CTZ TARGET_MODULO 468 #define TARGET_EXTSWSLI (TARGET_MODULO && TARGET_POWERPC64) 469 #define TARGET_MADDLD TARGET_MODULO 470 471 #define TARGET_XSCVDPSPN (TARGET_DIRECT_MOVE || TARGET_P8_VECTOR) 472 #define TARGET_XSCVSPDPN (TARGET_DIRECT_MOVE || TARGET_P8_VECTOR) 473 #define TARGET_VADDUQM (TARGET_P8_VECTOR && TARGET_POWERPC64) 474 #define TARGET_DIRECT_MOVE_128 (TARGET_P9_VECTOR && TARGET_DIRECT_MOVE \ 475 && TARGET_POWERPC64) 476 #define TARGET_VEXTRACTUB (TARGET_P9_VECTOR && TARGET_DIRECT_MOVE \ 477 && TARGET_POWERPC64) 478 479 /* Whether we should avoid (SUBREG:SI (REG:SF) and (SUBREG:SF (REG:SI). */ 480 #define TARGET_NO_SF_SUBREG TARGET_DIRECT_MOVE_64BIT 481 #define TARGET_ALLOW_SF_SUBREG (!TARGET_DIRECT_MOVE_64BIT) 482 483 /* This wants to be set for p8 and newer. On p7, overlapping unaligned 484 loads are slow. */ 485 #define TARGET_EFFICIENT_OVERLAPPING_UNALIGNED TARGET_EFFICIENT_UNALIGNED_VSX 486 487 /* Byte/char syncs were added as phased in for ISA 2.06B, but are not present 488 in power7, so conditionalize them on p8 features. TImode syncs need quad 489 memory support. */ 490 #define TARGET_SYNC_HI_QI (TARGET_QUAD_MEMORY \ 491 || TARGET_QUAD_MEMORY_ATOMIC \ 492 || TARGET_DIRECT_MOVE) 493 494 #define TARGET_SYNC_TI TARGET_QUAD_MEMORY_ATOMIC 495 496 /* Power7 has both 32-bit load and store integer for the FPRs, so we don't need 497 to allocate the SDmode stack slot to get the value into the proper location 498 in the register. */ 499 #define TARGET_NO_SDMODE_STACK (TARGET_LFIWZX && TARGET_STFIWX && TARGET_DFP) 500 501 /* ISA 3.0 has new min/max functions that don't need fast math that are being 502 phased in. Min/max using FSEL or XSMAXDP/XSMINDP do not return the correct 503 answers if the arguments are not in the normal range. */ 504 #define TARGET_MINMAX (TARGET_HARD_FLOAT && TARGET_PPC_GFXOPT \ 505 && (TARGET_P9_MINMAX || !flag_trapping_math)) 506 507 /* In switching from using target_flags to using rs6000_isa_flags, the options 508 machinery creates OPTION_MASK_<xxx> instead of MASK_<xxx>. For now map 509 OPTION_MASK_<xxx> back into MASK_<xxx>. */ 510 #define MASK_ALTIVEC OPTION_MASK_ALTIVEC 511 #define MASK_CMPB OPTION_MASK_CMPB 512 #define MASK_CRYPTO OPTION_MASK_CRYPTO 513 #define MASK_DFP OPTION_MASK_DFP 514 #define MASK_DIRECT_MOVE OPTION_MASK_DIRECT_MOVE 515 #define MASK_DLMZB OPTION_MASK_DLMZB 516 #define MASK_EABI OPTION_MASK_EABI 517 #define MASK_FLOAT128_KEYWORD OPTION_MASK_FLOAT128_KEYWORD 518 #define MASK_FLOAT128_HW OPTION_MASK_FLOAT128_HW 519 #define MASK_FPRND OPTION_MASK_FPRND 520 #define MASK_P8_FUSION OPTION_MASK_P8_FUSION 521 #define MASK_HARD_FLOAT OPTION_MASK_HARD_FLOAT 522 #define MASK_HTM OPTION_MASK_HTM 523 #define MASK_ISEL OPTION_MASK_ISEL 524 #define MASK_MFCRF OPTION_MASK_MFCRF 525 #define MASK_MMA OPTION_MASK_MMA 526 #define MASK_MULHW OPTION_MASK_MULHW 527 #define MASK_MULTIPLE OPTION_MASK_MULTIPLE 528 #define MASK_NO_UPDATE OPTION_MASK_NO_UPDATE 529 #define MASK_P8_VECTOR OPTION_MASK_P8_VECTOR 530 #define MASK_P9_VECTOR OPTION_MASK_P9_VECTOR 531 #define MASK_P9_MISC OPTION_MASK_P9_MISC 532 #define MASK_POPCNTB OPTION_MASK_POPCNTB 533 #define MASK_POPCNTD OPTION_MASK_POPCNTD 534 #define MASK_PPC_GFXOPT OPTION_MASK_PPC_GFXOPT 535 #define MASK_PPC_GPOPT OPTION_MASK_PPC_GPOPT 536 #define MASK_RECIP_PRECISION OPTION_MASK_RECIP_PRECISION 537 #define MASK_SOFT_FLOAT OPTION_MASK_SOFT_FLOAT 538 #define MASK_STRICT_ALIGN OPTION_MASK_STRICT_ALIGN 539 #define MASK_UPDATE OPTION_MASK_UPDATE 540 #define MASK_VSX OPTION_MASK_VSX 541 #define MASK_POWER10 OPTION_MASK_POWER10 542 #define MASK_P10_FUSION OPTION_MASK_P10_FUSION 543 544 #ifndef IN_LIBGCC2 545 #define MASK_POWERPC64 OPTION_MASK_POWERPC64 546 #endif 547 548 #ifdef TARGET_64BIT 549 #define MASK_64BIT OPTION_MASK_64BIT 550 #endif 551 552 #ifdef TARGET_LITTLE_ENDIAN 553 #define MASK_LITTLE_ENDIAN OPTION_MASK_LITTLE_ENDIAN 554 #endif 555 556 #ifdef TARGET_REGNAMES 557 #define MASK_REGNAMES OPTION_MASK_REGNAMES 558 #endif 559 560 #ifdef TARGET_PROTOTYPE 561 #define MASK_PROTOTYPE OPTION_MASK_PROTOTYPE 562 #endif 563 564 #ifdef TARGET_MODULO 565 #define RS6000_BTM_MODULO OPTION_MASK_MODULO 566 #endif 567 568 569 /* For power systems, we want to enable Altivec and VSX builtins even if the 570 user did not use -maltivec or -mvsx to allow the builtins to be used inside 571 of #pragma GCC target or the target attribute to change the code level for a 572 given system. */ 573 574 #define TARGET_EXTRA_BUILTINS (TARGET_POWERPC64 \ 575 || TARGET_PPC_GPOPT /* 970/power4 */ \ 576 || TARGET_POPCNTB /* ISA 2.02 */ \ 577 || TARGET_CMPB /* ISA 2.05 */ \ 578 || TARGET_POPCNTD /* ISA 2.06 */ \ 579 || TARGET_ALTIVEC \ 580 || TARGET_VSX \ 581 || TARGET_HARD_FLOAT) 582 583 /* E500 cores only support plain "sync", not lwsync. */ 584 #define TARGET_NO_LWSYNC (rs6000_cpu == PROCESSOR_PPC8540 \ 585 || rs6000_cpu == PROCESSOR_PPC8548) 586 587 588 /* Which machine supports the various reciprocal estimate instructions. */ 589 #define TARGET_FRES (TARGET_HARD_FLOAT && TARGET_PPC_GFXOPT) 590 591 #define TARGET_FRE (TARGET_HARD_FLOAT \ 592 && (TARGET_POPCNTB || VECTOR_UNIT_VSX_P (DFmode))) 593 594 #define TARGET_FRSQRTES (TARGET_HARD_FLOAT && TARGET_POPCNTB \ 595 && TARGET_PPC_GFXOPT) 596 597 #define TARGET_FRSQRTE (TARGET_HARD_FLOAT \ 598 && (TARGET_PPC_GFXOPT || VECTOR_UNIT_VSX_P (DFmode))) 599 600 /* Macro to say whether we can do optimizations where we need to do parts of 601 the calculation in 64-bit GPRs and then is transfered to the vector 602 registers. */ 603 #define TARGET_DIRECT_MOVE_64BIT (TARGET_DIRECT_MOVE \ 604 && TARGET_P8_VECTOR \ 605 && TARGET_POWERPC64) 606 607 /* Whether the various reciprocal divide/square root estimate instructions 608 exist, and whether we should automatically generate code for the instruction 609 by default. */ 610 #define RS6000_RECIP_MASK_HAVE_RE 0x1 /* have RE instruction. */ 611 #define RS6000_RECIP_MASK_AUTO_RE 0x2 /* generate RE by default. */ 612 #define RS6000_RECIP_MASK_HAVE_RSQRTE 0x4 /* have RSQRTE instruction. */ 613 #define RS6000_RECIP_MASK_AUTO_RSQRTE 0x8 /* gen. RSQRTE by default. */ 614 615 extern unsigned char rs6000_recip_bits[]; 616 617 #define RS6000_RECIP_HAVE_RE_P(MODE) \ 618 (rs6000_recip_bits[(int)(MODE)] & RS6000_RECIP_MASK_HAVE_RE) 619 620 #define RS6000_RECIP_AUTO_RE_P(MODE) \ 621 (rs6000_recip_bits[(int)(MODE)] & RS6000_RECIP_MASK_AUTO_RE) 622 623 #define RS6000_RECIP_HAVE_RSQRTE_P(MODE) \ 624 (rs6000_recip_bits[(int)(MODE)] & RS6000_RECIP_MASK_HAVE_RSQRTE) 625 626 #define RS6000_RECIP_AUTO_RSQRTE_P(MODE) \ 627 (rs6000_recip_bits[(int)(MODE)] & RS6000_RECIP_MASK_AUTO_RSQRTE) 628 629 /* The default CPU for TARGET_OPTION_OVERRIDE. */ 630 #define OPTION_TARGET_CPU_DEFAULT TARGET_CPU_DEFAULT 631 632 /* Target pragma. */ 633 #define REGISTER_TARGET_PRAGMAS() do { \ 634 c_register_pragma (0, "longcall", rs6000_pragma_longcall); \ 635 targetm.target_option.pragma_parse = rs6000_pragma_target_parse; \ 636 targetm.resolve_overloaded_builtin = altivec_resolve_overloaded_builtin; \ 637 rs6000_target_modify_macros_ptr = rs6000_target_modify_macros; \ 638 } while (0) 639 640 /* Target #defines. */ 641 #define TARGET_CPU_CPP_BUILTINS() \ 642 rs6000_cpu_cpp_builtins (pfile) 643 644 /* Target hooks for D language. */ 645 #define TARGET_D_CPU_VERSIONS rs6000_d_target_versions 646 #define TARGET_D_REGISTER_CPU_TARGET_INFO rs6000_d_register_target_info 647 648 /* This is used by rs6000_cpu_cpp_builtins to indicate the byte order 649 we're compiling for. Some configurations may need to override it. */ 650 #define RS6000_CPU_CPP_ENDIAN_BUILTINS() \ 651 do \ 652 { \ 653 if (BYTES_BIG_ENDIAN) \ 654 { \ 655 builtin_define ("__BIG_ENDIAN__"); \ 656 builtin_define ("_BIG_ENDIAN"); \ 657 builtin_assert ("machine=bigendian"); \ 658 } \ 659 else \ 660 { \ 661 builtin_define ("__LITTLE_ENDIAN__"); \ 662 builtin_define ("_LITTLE_ENDIAN"); \ 663 builtin_assert ("machine=littleendian"); \ 664 } \ 665 } \ 666 while (0) 667 668 /* Target machine storage layout. */ 669 670 /* Define this if most significant bit is lowest numbered 671 in instructions that operate on numbered bit-fields. */ 672 /* That is true on RS/6000. */ 673 #define BITS_BIG_ENDIAN 1 674 675 /* Define this if most significant byte of a word is the lowest numbered. */ 676 /* That is true on RS/6000. */ 677 #define BYTES_BIG_ENDIAN 1 678 679 /* Define this if most significant word of a multiword number is lowest 680 numbered. 681 682 For RS/6000 we can decide arbitrarily since there are no machine 683 instructions for them. Might as well be consistent with bits and bytes. */ 684 #define WORDS_BIG_ENDIAN 1 685 686 /* This says that for the IBM long double the larger magnitude double 687 comes first. It's really a two element double array, and arrays 688 don't index differently between little- and big-endian. */ 689 #define LONG_DOUBLE_LARGE_FIRST 1 690 691 #define MAX_BITS_PER_WORD 64 692 693 /* Width of a word, in units (bytes). */ 694 #define UNITS_PER_WORD (! TARGET_POWERPC64 ? 4 : 8) 695 #ifdef IN_LIBGCC2 696 #define MIN_UNITS_PER_WORD UNITS_PER_WORD 697 #else 698 #define MIN_UNITS_PER_WORD 4 699 #endif 700 #define UNITS_PER_FP_WORD 8 701 #define UNITS_PER_ALTIVEC_WORD 16 702 #define UNITS_PER_VSX_WORD 16 703 704 /* Type used for ptrdiff_t, as a string used in a declaration. */ 705 #define PTRDIFF_TYPE "int" 706 707 /* Type used for size_t, as a string used in a declaration. */ 708 #define SIZE_TYPE "long unsigned int" 709 710 /* Type used for wchar_t, as a string used in a declaration. */ 711 #define WCHAR_TYPE "short unsigned int" 712 713 /* Width of wchar_t in bits. */ 714 #define WCHAR_TYPE_SIZE 16 715 716 /* A C expression for the size in bits of the type `short' on the 717 target machine. If you don't define this, the default is half a 718 word. (If this would be less than one storage unit, it is 719 rounded up to one unit.) */ 720 #define SHORT_TYPE_SIZE 16 721 722 /* A C expression for the size in bits of the type `int' on the 723 target machine. If you don't define this, the default is one 724 word. */ 725 #define INT_TYPE_SIZE 32 726 727 /* A C expression for the size in bits of the type `long' on the 728 target machine. If you don't define this, the default is one 729 word. */ 730 #define LONG_TYPE_SIZE (TARGET_32BIT ? 32 : 64) 731 732 /* A C expression for the size in bits of the type `long long' on the 733 target machine. If you don't define this, the default is two 734 words. */ 735 #define LONG_LONG_TYPE_SIZE 64 736 737 /* A C expression for the size in bits of the type `float' on the 738 target machine. If you don't define this, the default is one 739 word. */ 740 #define FLOAT_TYPE_SIZE 32 741 742 /* A C expression for the size in bits of the type `double' on the 743 target machine. If you don't define this, the default is two 744 words. */ 745 #define DOUBLE_TYPE_SIZE 64 746 747 /* A C expression for the size in bits of the type `long double' on the target 748 machine. If you don't define this, the default is two words. */ 749 #define LONG_DOUBLE_TYPE_SIZE rs6000_long_double_type_size 750 751 /* Work around rs6000_long_double_type_size dependency in ada/targtyps.c. */ 752 #define WIDEST_HARDWARE_FP_SIZE 64 753 754 /* Width in bits of a pointer. 755 See also the macro `Pmode' defined below. */ 756 extern unsigned rs6000_pointer_size; 757 #define POINTER_SIZE rs6000_pointer_size 758 759 /* Allocation boundary (in *bits*) for storing arguments in argument list. */ 760 #define PARM_BOUNDARY (TARGET_32BIT ? 32 : 64) 761 762 /* Boundary (in *bits*) on which stack pointer should be aligned. */ 763 #define STACK_BOUNDARY \ 764 ((TARGET_32BIT && !TARGET_ALTIVEC && !TARGET_ALTIVEC_ABI && !TARGET_VSX) \ 765 ? 64 : 128) 766 767 /* Allocation boundary (in *bits*) for the code of a function. */ 768 #define FUNCTION_BOUNDARY 32 769 770 /* No data type is required to be aligned rounder than this. Warning, if 771 BIGGEST_ALIGNMENT is changed, then this may be an ABI break. An example 772 of where this can break an ABI is in GLIBC's struct _Unwind_Exception. */ 773 #define BIGGEST_ALIGNMENT 128 774 775 /* Alignment of field after `int : 0' in a structure. */ 776 #define EMPTY_FIELD_BOUNDARY 32 777 778 /* Every structure's size must be a multiple of this. */ 779 #define STRUCTURE_SIZE_BOUNDARY 8 780 781 /* A bit-field declared as `int' forces `int' alignment for the struct. */ 782 #define PCC_BITFIELD_TYPE_MATTERS 1 783 784 enum data_align { align_abi, align_opt, align_both }; 785 786 /* A C expression to compute the alignment for a variables in the 787 local store. TYPE is the data type, and ALIGN is the alignment 788 that the object would ordinarily have. */ 789 #define LOCAL_ALIGNMENT(TYPE, ALIGN) \ 790 rs6000_data_alignment (TYPE, ALIGN, align_both) 791 792 /* Make arrays of chars word-aligned for the same reasons. */ 793 #define DATA_ALIGNMENT(TYPE, ALIGN) \ 794 rs6000_data_alignment (TYPE, ALIGN, align_opt) 795 796 /* Align vectors to 128 bits. */ 797 #define DATA_ABI_ALIGNMENT(TYPE, ALIGN) \ 798 rs6000_data_alignment (TYPE, ALIGN, align_abi) 799 800 /* Nonzero if move instructions will actually fail to work 801 when given unaligned data. */ 802 #define STRICT_ALIGNMENT 0 803 804 /* Standard register usage. */ 805 806 /* Number of actual hardware registers. 807 The hardware registers are assigned numbers for the compiler 808 from 0 to just below FIRST_PSEUDO_REGISTER. 809 All registers that the compiler knows about must be given numbers, 810 even those that are not normally considered general registers. 811 812 RS/6000 has 32 fixed-point registers, 32 floating-point registers, 813 a count register, a link register, and 8 condition register fields, 814 which we view here as separate registers. AltiVec adds 32 vector 815 registers and a VRsave register. 816 817 In addition, the difference between the frame and argument pointers is 818 a function of the number of registers saved, so we need to have a 819 register for AP that will later be eliminated in favor of SP or FP. 820 This is a normal register, but it is fixed. 821 822 We also create a pseudo register for float/int conversions, that will 823 really represent the memory location used. It is represented here as 824 a register, in order to work around problems in allocating stack storage 825 in inline functions. 826 827 Another pseudo (not included in DWARF_FRAME_REGISTERS) is soft frame 828 pointer, which is eventually eliminated in favor of SP or FP. */ 829 830 #define FIRST_PSEUDO_REGISTER 111 831 832 /* Use standard DWARF numbering for DWARF debugging information. */ 833 #define DBX_REGISTER_NUMBER(REGNO) rs6000_dbx_register_number ((REGNO), 0) 834 835 /* Use gcc hard register numbering for eh_frame. */ 836 #define DWARF_FRAME_REGNUM(REGNO) (REGNO) 837 838 /* Map register numbers held in the call frame info that gcc has 839 collected using DWARF_FRAME_REGNUM to those that should be output in 840 .debug_frame and .eh_frame. */ 841 #define DWARF2_FRAME_REG_OUT(REGNO, FOR_EH) \ 842 rs6000_dbx_register_number ((REGNO), (FOR_EH) ? 2 : 1) 843 844 /* 1 for registers that have pervasive standard uses 845 and are not available for the register allocator. 846 847 On RS/6000, r1 is used for the stack. On Darwin, r2 is available 848 as a local register; for all other OS's r2 is the TOC pointer. 849 850 On System V implementations, r13 is fixed and not available for use. */ 851 852 #define FIXED_REGISTERS \ 853 {/* GPRs */ \ 854 0, 1, FIXED_R2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, FIXED_R13, 0, 0, \ 855 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ 856 /* FPRs */ \ 857 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ 858 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ 859 /* VRs */ \ 860 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ 861 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ 862 /* lr ctr ca ap */ \ 863 0, 0, 1, 1, \ 864 /* cr0..cr7 */ \ 865 0, 0, 0, 0, 0, 0, 0, 0, \ 866 /* vrsave vscr sfp */ \ 867 1, 1, 1 \ 868 } 869 870 /* Like `CALL_USED_REGISTERS' except this macro doesn't require that 871 the entire set of `FIXED_REGISTERS' be included. 872 (`CALL_USED_REGISTERS' must be a superset of `FIXED_REGISTERS'). 873 This macro is optional. If not specified, it defaults to the value 874 of `CALL_USED_REGISTERS'. */ 875 876 #define CALL_REALLY_USED_REGISTERS \ 877 {/* GPRs */ \ 878 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, FIXED_R13, 0, 0, \ 879 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ 880 /* FPRs */ \ 881 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, \ 882 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ 883 /* VRs */ \ 884 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ 885 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ 886 /* lr ctr ca ap */ \ 887 1, 1, 1, 1, \ 888 /* cr0..cr7 */ \ 889 1, 1, 0, 0, 0, 1, 1, 1, \ 890 /* vrsave vscr sfp */ \ 891 0, 0, 0 \ 892 } 893 894 #define TOTAL_ALTIVEC_REGS (LAST_ALTIVEC_REGNO - FIRST_ALTIVEC_REGNO + 1) 895 896 #define FIRST_SAVED_ALTIVEC_REGNO (FIRST_ALTIVEC_REGNO+20) 897 #define FIRST_SAVED_FP_REGNO (14+32) 898 #define FIRST_SAVED_GP_REGNO (FIXED_R13 ? 14 : 13) 899 900 /* List the order in which to allocate registers. Each register must be 901 listed once, even those in FIXED_REGISTERS. 902 903 We allocate in the following order: 904 fp0 (not saved or used for anything) 905 fp13 - fp2 (not saved; incoming fp arg registers) 906 fp1 (not saved; return value) 907 fp31 - fp14 (saved; order given to save least number) 908 cr7, cr5 (not saved or special) 909 cr6 (not saved, but used for vector operations) 910 cr1 (not saved, but used for FP operations) 911 cr0 (not saved, but used for arithmetic operations) 912 cr4, cr3, cr2 (saved) 913 r9 (not saved; best for TImode) 914 r10, r8-r4 (not saved; highest first for less conflict with params) 915 r3 (not saved; return value register) 916 r11 (not saved; later alloc to help shrink-wrap) 917 r0 (not saved; cannot be base reg) 918 r31 - r13 (saved; order given to save least number) 919 r12 (not saved; if used for DImode or DFmode would use r13) 920 ctr (not saved; when we have the choice ctr is better) 921 lr (saved) 922 r1, r2, ap, ca (fixed) 923 v0 - v1 (not saved or used for anything) 924 v13 - v3 (not saved; incoming vector arg registers) 925 v2 (not saved; incoming vector arg reg; return value) 926 v19 - v14 (not saved or used for anything) 927 v31 - v20 (saved; order given to save least number) 928 vrsave, vscr (fixed) 929 sfp (fixed) 930 */ 931 932 #if FIXED_R2 == 1 933 #define MAYBE_R2_AVAILABLE 934 #define MAYBE_R2_FIXED 2, 935 #else 936 #define MAYBE_R2_AVAILABLE 2, 937 #define MAYBE_R2_FIXED 938 #endif 939 940 #if FIXED_R13 == 1 941 #define EARLY_R12 12, 942 #define LATE_R12 943 #else 944 #define EARLY_R12 945 #define LATE_R12 12, 946 #endif 947 948 #define REG_ALLOC_ORDER \ 949 {32, \ 950 /* move fr13 (ie 45) later, so if we need TFmode, it does */ \ 951 /* not use fr14 which is a saved register. */ \ 952 44, 43, 42, 41, 40, 39, 38, 37, 36, 35, 34, 45, \ 953 33, \ 954 63, 62, 61, 60, 59, 58, 57, 56, 55, 54, 53, 52, 51, \ 955 50, 49, 48, 47, 46, \ 956 100, 107, 105, 106, 101, 104, 103, 102, \ 957 MAYBE_R2_AVAILABLE \ 958 9, 10, 8, 7, 6, 5, 4, \ 959 3, EARLY_R12 11, 0, \ 960 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, \ 961 18, 17, 16, 15, 14, 13, LATE_R12 \ 962 97, 96, \ 963 1, MAYBE_R2_FIXED 99, 98, \ 964 /* AltiVec registers. */ \ 965 64, 65, \ 966 77, 76, 75, 74, 73, 72, 71, 70, 69, 68, 67, \ 967 66, \ 968 83, 82, 81, 80, 79, 78, \ 969 95, 94, 93, 92, 91, 90, 89, 88, 87, 86, 85, 84, \ 970 108, 109, \ 971 110 \ 972 } 973 974 /* True if register is floating-point. */ 975 #define FP_REGNO_P(N) ((N) >= 32 && (N) <= 63) 976 977 /* True if register is a condition register. */ 978 #define CR_REGNO_P(N) ((N) >= CR0_REGNO && (N) <= CR7_REGNO) 979 980 /* True if register is a condition register, but not cr0. */ 981 #define CR_REGNO_NOT_CR0_P(N) ((N) >= CR1_REGNO && (N) <= CR7_REGNO) 982 983 /* True if register is an integer register. */ 984 #define INT_REGNO_P(N) \ 985 ((N) <= 31 || (N) == ARG_POINTER_REGNUM || (N) == FRAME_POINTER_REGNUM) 986 987 /* True if register is the CA register. */ 988 #define CA_REGNO_P(N) ((N) == CA_REGNO) 989 990 /* True if register is an AltiVec register. */ 991 #define ALTIVEC_REGNO_P(N) ((N) >= FIRST_ALTIVEC_REGNO && (N) <= LAST_ALTIVEC_REGNO) 992 993 /* True if register is a VSX register. */ 994 #define VSX_REGNO_P(N) (FP_REGNO_P (N) || ALTIVEC_REGNO_P (N)) 995 996 /* Alternate name for any vector register supporting floating point, no matter 997 which instruction set(s) are available. */ 998 #define VFLOAT_REGNO_P(N) \ 999 (ALTIVEC_REGNO_P (N) || (TARGET_VSX && FP_REGNO_P (N))) 1000 1001 /* Alternate name for any vector register supporting integer, no matter which 1002 instruction set(s) are available. */ 1003 #define VINT_REGNO_P(N) ALTIVEC_REGNO_P (N) 1004 1005 /* Alternate name for any vector register supporting logical operations, no 1006 matter which instruction set(s) are available. Allow GPRs as well as the 1007 vector registers. */ 1008 #define VLOGICAL_REGNO_P(N) \ 1009 (INT_REGNO_P (N) || ALTIVEC_REGNO_P (N) \ 1010 || (TARGET_VSX && FP_REGNO_P (N))) \ 1011 1012 /* When setting up caller-save slots (MODE == VOIDmode) ensure we allocate 1013 enough space to account for vectors in FP regs. However, TFmode/TDmode 1014 should not use VSX instructions to do a caller save. */ 1015 #define HARD_REGNO_CALLER_SAVE_MODE(REGNO, NREGS, MODE) \ 1016 ((NREGS) <= rs6000_hard_regno_nregs[MODE][REGNO] \ 1017 ? (MODE) \ 1018 : TARGET_VSX \ 1019 && ((MODE) == VOIDmode || ALTIVEC_OR_VSX_VECTOR_MODE (MODE)) \ 1020 && FP_REGNO_P (REGNO) \ 1021 ? V2DFmode \ 1022 : FLOAT128_IBM_P (MODE) && FP_REGNO_P (REGNO) \ 1023 ? DFmode \ 1024 : (MODE) == TDmode && FP_REGNO_P (REGNO) \ 1025 ? DImode \ 1026 : choose_hard_reg_mode ((REGNO), (NREGS), NULL)) 1027 1028 #define VSX_VECTOR_MODE(MODE) \ 1029 ((MODE) == V4SFmode \ 1030 || (MODE) == V2DFmode) \ 1031 1032 /* Modes that are not vectors, but require vector alignment. Treat these like 1033 vectors in terms of loads and stores. */ 1034 #define VECTOR_ALIGNMENT_P(MODE) \ 1035 (FLOAT128_VECTOR_P (MODE) || (MODE) == OOmode || (MODE) == XOmode) 1036 1037 #define ALTIVEC_VECTOR_MODE(MODE) \ 1038 ((MODE) == V16QImode \ 1039 || (MODE) == V8HImode \ 1040 || (MODE) == V4SFmode \ 1041 || (MODE) == V4SImode \ 1042 || VECTOR_ALIGNMENT_P (MODE)) 1043 1044 #define ALTIVEC_OR_VSX_VECTOR_MODE(MODE) \ 1045 (ALTIVEC_VECTOR_MODE (MODE) || VSX_VECTOR_MODE (MODE) \ 1046 || (MODE) == V2DImode || (MODE) == V1TImode) 1047 1048 /* Post-reload, we can't use any new AltiVec registers, as we already 1049 emitted the vrsave mask. */ 1050 1051 #define HARD_REGNO_RENAME_OK(SRC, DST) \ 1052 (! ALTIVEC_REGNO_P (DST) || df_regs_ever_live_p (DST)) 1053 1054 /* Specify the cost of a branch insn; roughly the number of extra insns that 1055 should be added to avoid a branch. 1056 1057 Set this to 3 on the RS/6000 since that is roughly the average cost of an 1058 unscheduled conditional branch. */ 1059 1060 #define BRANCH_COST(speed_p, predictable_p) 3 1061 1062 /* Override BRANCH_COST heuristic which empirically produces worse 1063 performance for removing short circuiting from the logical ops. */ 1064 1065 #define LOGICAL_OP_NON_SHORT_CIRCUIT 0 1066 1067 /* Specify the registers used for certain standard purposes. 1068 The values of these macros are register numbers. */ 1069 1070 /* RS/6000 pc isn't overloaded on a register that the compiler knows about. */ 1071 /* #define PC_REGNUM */ 1072 1073 /* Register to use for pushing function arguments. */ 1074 #define STACK_POINTER_REGNUM 1 1075 1076 /* Base register for access to local variables of the function. */ 1077 #define HARD_FRAME_POINTER_REGNUM 31 1078 1079 /* Base register for access to local variables of the function. */ 1080 #define FRAME_POINTER_REGNUM 110 1081 1082 /* Base register for access to arguments of the function. */ 1083 #define ARG_POINTER_REGNUM 99 1084 1085 /* Place to put static chain when calling a function that requires it. */ 1086 #define STATIC_CHAIN_REGNUM 11 1087 1088 /* Base register for access to thread local storage variables. */ 1089 #define TLS_REGNUM ((TARGET_64BIT) ? 13 : 2) 1090 1091 1092 /* Define the classes of registers for register constraints in the 1093 machine description. Also define ranges of constants. 1094 1095 One of the classes must always be named ALL_REGS and include all hard regs. 1096 If there is more than one class, another class must be named NO_REGS 1097 and contain no registers. 1098 1099 The name GENERAL_REGS must be the name of a class (or an alias for 1100 another name such as ALL_REGS). This is the class of registers 1101 that is allowed by "g" or "r" in a register constraint. 1102 Also, registers outside this class are allocated only when 1103 instructions express preferences for them. 1104 1105 The classes must be numbered in nondecreasing order; that is, 1106 a larger-numbered class must never be contained completely 1107 in a smaller-numbered class. 1108 1109 For any two classes, it is very desirable that there be another 1110 class that represents their union. */ 1111 1112 /* The RS/6000 has three types of registers, fixed-point, floating-point, and 1113 condition registers, plus three special registers, CTR, and the link 1114 register. AltiVec adds a vector register class. VSX registers overlap the 1115 FPR registers and the Altivec registers. 1116 1117 However, r0 is special in that it cannot be used as a base register. 1118 So make a class for registers valid as base registers. 1119 1120 Also, cr0 is the only condition code register that can be used in 1121 arithmetic insns, so make a separate class for it. */ 1122 1123 enum reg_class 1124 { 1125 NO_REGS, 1126 BASE_REGS, 1127 GENERAL_REGS, 1128 FLOAT_REGS, 1129 ALTIVEC_REGS, 1130 VSX_REGS, 1131 VRSAVE_REGS, 1132 VSCR_REGS, 1133 GEN_OR_FLOAT_REGS, 1134 GEN_OR_VSX_REGS, 1135 LINK_REGS, 1136 CTR_REGS, 1137 LINK_OR_CTR_REGS, 1138 SPECIAL_REGS, 1139 SPEC_OR_GEN_REGS, 1140 CR0_REGS, 1141 CR_REGS, 1142 NON_FLOAT_REGS, 1143 CA_REGS, 1144 ALL_REGS, 1145 LIM_REG_CLASSES 1146 }; 1147 1148 #define N_REG_CLASSES (int) LIM_REG_CLASSES 1149 1150 /* Give names of register classes as strings for dump file. */ 1151 1152 #define REG_CLASS_NAMES \ 1153 { \ 1154 "NO_REGS", \ 1155 "BASE_REGS", \ 1156 "GENERAL_REGS", \ 1157 "FLOAT_REGS", \ 1158 "ALTIVEC_REGS", \ 1159 "VSX_REGS", \ 1160 "VRSAVE_REGS", \ 1161 "VSCR_REGS", \ 1162 "GEN_OR_FLOAT_REGS", \ 1163 "GEN_OR_VSX_REGS", \ 1164 "LINK_REGS", \ 1165 "CTR_REGS", \ 1166 "LINK_OR_CTR_REGS", \ 1167 "SPECIAL_REGS", \ 1168 "SPEC_OR_GEN_REGS", \ 1169 "CR0_REGS", \ 1170 "CR_REGS", \ 1171 "NON_FLOAT_REGS", \ 1172 "CA_REGS", \ 1173 "ALL_REGS" \ 1174 } 1175 1176 /* Define which registers fit in which classes. 1177 This is an initializer for a vector of HARD_REG_SET 1178 of length N_REG_CLASSES. */ 1179 1180 #define REG_CLASS_CONTENTS \ 1181 { \ 1182 /* NO_REGS. */ \ 1183 { 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, \ 1184 /* BASE_REGS. */ \ 1185 { 0xfffffffe, 0x00000000, 0x00000000, 0x00004008 }, \ 1186 /* GENERAL_REGS. */ \ 1187 { 0xffffffff, 0x00000000, 0x00000000, 0x00004008 }, \ 1188 /* FLOAT_REGS. */ \ 1189 { 0x00000000, 0xffffffff, 0x00000000, 0x00000000 }, \ 1190 /* ALTIVEC_REGS. */ \ 1191 { 0x00000000, 0x00000000, 0xffffffff, 0x00000000 }, \ 1192 /* VSX_REGS. */ \ 1193 { 0x00000000, 0xffffffff, 0xffffffff, 0x00000000 }, \ 1194 /* VRSAVE_REGS. */ \ 1195 { 0x00000000, 0x00000000, 0x00000000, 0x00001000 }, \ 1196 /* VSCR_REGS. */ \ 1197 { 0x00000000, 0x00000000, 0x00000000, 0x00002000 }, \ 1198 /* GEN_OR_FLOAT_REGS. */ \ 1199 { 0xffffffff, 0xffffffff, 0x00000000, 0x00004008 }, \ 1200 /* GEN_OR_VSX_REGS. */ \ 1201 { 0xffffffff, 0xffffffff, 0xffffffff, 0x00004008 }, \ 1202 /* LINK_REGS. */ \ 1203 { 0x00000000, 0x00000000, 0x00000000, 0x00000001 }, \ 1204 /* CTR_REGS. */ \ 1205 { 0x00000000, 0x00000000, 0x00000000, 0x00000002 }, \ 1206 /* LINK_OR_CTR_REGS. */ \ 1207 { 0x00000000, 0x00000000, 0x00000000, 0x00000003 }, \ 1208 /* SPECIAL_REGS. */ \ 1209 { 0x00000000, 0x00000000, 0x00000000, 0x00001003 }, \ 1210 /* SPEC_OR_GEN_REGS. */ \ 1211 { 0xffffffff, 0x00000000, 0x00000000, 0x0000500b }, \ 1212 /* CR0_REGS. */ \ 1213 { 0x00000000, 0x00000000, 0x00000000, 0x00000010 }, \ 1214 /* CR_REGS. */ \ 1215 { 0x00000000, 0x00000000, 0x00000000, 0x00000ff0 }, \ 1216 /* NON_FLOAT_REGS. */ \ 1217 { 0xffffffff, 0x00000000, 0x00000000, 0x00004ffb }, \ 1218 /* CA_REGS. */ \ 1219 { 0x00000000, 0x00000000, 0x00000000, 0x00000004 }, \ 1220 /* ALL_REGS. */ \ 1221 { 0xffffffff, 0xffffffff, 0xffffffff, 0x00007fff } \ 1222 } 1223 1224 /* The same information, inverted: 1225 Return the class number of the smallest class containing 1226 reg number REGNO. This could be a conditional expression 1227 or could index an array. */ 1228 1229 extern enum reg_class rs6000_regno_regclass[FIRST_PSEUDO_REGISTER]; 1230 1231 #define REGNO_REG_CLASS(REGNO) \ 1232 (gcc_checking_assert (IN_RANGE ((REGNO), 0, FIRST_PSEUDO_REGISTER-1)),\ 1233 rs6000_regno_regclass[(REGNO)]) 1234 1235 /* Register classes for various constraints that are based on the target 1236 switches. */ 1237 enum r6000_reg_class_enum { 1238 RS6000_CONSTRAINT_d, /* fpr registers for double values */ 1239 RS6000_CONSTRAINT_f, /* fpr registers for single values */ 1240 RS6000_CONSTRAINT_v, /* Altivec registers */ 1241 RS6000_CONSTRAINT_wa, /* Any VSX register */ 1242 RS6000_CONSTRAINT_we, /* VSX register if ISA 3.0 vector. */ 1243 RS6000_CONSTRAINT_wr, /* GPR register if 64-bit */ 1244 RS6000_CONSTRAINT_wx, /* FPR register for STFIWX */ 1245 RS6000_CONSTRAINT_wA, /* BASE_REGS if 64-bit. */ 1246 RS6000_CONSTRAINT_MAX 1247 }; 1248 1249 extern enum reg_class rs6000_constraints[RS6000_CONSTRAINT_MAX]; 1250 1251 /* The class value for index registers, and the one for base regs. */ 1252 #define INDEX_REG_CLASS GENERAL_REGS 1253 #define BASE_REG_CLASS BASE_REGS 1254 1255 /* Return whether a given register class can hold VSX objects. */ 1256 #define VSX_REG_CLASS_P(CLASS) \ 1257 ((CLASS) == VSX_REGS || (CLASS) == FLOAT_REGS || (CLASS) == ALTIVEC_REGS) 1258 1259 /* Return whether a given register class targets general purpose registers. */ 1260 #define GPR_REG_CLASS_P(CLASS) ((CLASS) == GENERAL_REGS || (CLASS) == BASE_REGS) 1261 1262 /* Given an rtx X being reloaded into a reg required to be 1263 in class CLASS, return the class of reg to actually use. 1264 In general this is just CLASS; but on some machines 1265 in some cases it is preferable to use a more restrictive class. 1266 1267 On the RS/6000, we have to return NO_REGS when we want to reload a 1268 floating-point CONST_DOUBLE to force it to be copied to memory. 1269 1270 We also don't want to reload integer values into floating-point 1271 registers if we can at all help it. In fact, this can 1272 cause reload to die, if it tries to generate a reload of CTR 1273 into a FP register and discovers it doesn't have the memory location 1274 required. 1275 1276 ??? Would it be a good idea to have reload do the converse, that is 1277 try to reload floating modes into FP registers if possible? 1278 */ 1279 1280 #define PREFERRED_RELOAD_CLASS(X,CLASS) \ 1281 rs6000_preferred_reload_class_ptr (X, CLASS) 1282 1283 /* Return the register class of a scratch register needed to copy IN into 1284 or out of a register in CLASS in MODE. If it can be done directly, 1285 NO_REGS is returned. */ 1286 1287 #define SECONDARY_RELOAD_CLASS(CLASS,MODE,IN) \ 1288 rs6000_secondary_reload_class_ptr (CLASS, MODE, IN) 1289 1290 /* Return the maximum number of consecutive registers 1291 needed to represent mode MODE in a register of class CLASS. 1292 1293 On RS/6000, this is the size of MODE in words, except in the FP regs, where 1294 a single reg is enough for two words, unless we have VSX, where the FP 1295 registers can hold 128 bits. */ 1296 #define CLASS_MAX_NREGS(CLASS, MODE) rs6000_class_max_nregs[(MODE)][(CLASS)] 1297 1298 /* Stack layout; function entry, exit and calling. */ 1299 1300 /* Define this if pushing a word on the stack 1301 makes the stack pointer a smaller address. */ 1302 #define STACK_GROWS_DOWNWARD 1 1303 1304 /* Offsets recorded in opcodes are a multiple of this alignment factor. */ 1305 #define DWARF_CIE_DATA_ALIGNMENT (-((int) (TARGET_32BIT ? 4 : 8))) 1306 1307 /* Define this to nonzero if the nominal address of the stack frame 1308 is at the high-address end of the local variables; 1309 that is, each additional local variable allocated 1310 goes at a more negative offset in the frame. 1311 1312 On the RS/6000, we grow upwards, from the area after the outgoing 1313 arguments. */ 1314 #define FRAME_GROWS_DOWNWARD (flag_stack_protect != 0 \ 1315 || (flag_sanitize & SANITIZE_ADDRESS) != 0) 1316 1317 /* Size of the fixed area on the stack */ 1318 #define RS6000_SAVE_AREA \ 1319 ((DEFAULT_ABI == ABI_V4 ? 8 : DEFAULT_ABI == ABI_ELFv2 ? 16 : 24) \ 1320 << (TARGET_64BIT ? 1 : 0)) 1321 1322 /* Stack offset for toc save slot. */ 1323 #define RS6000_TOC_SAVE_SLOT \ 1324 ((DEFAULT_ABI == ABI_ELFv2 ? 12 : 20) << (TARGET_64BIT ? 1 : 0)) 1325 1326 /* Align an address */ 1327 #define RS6000_ALIGN(n,a) ROUND_UP ((n), (a)) 1328 1329 /* Offset within stack frame to start allocating local variables at. 1330 If FRAME_GROWS_DOWNWARD, this is the offset to the END of the 1331 first local allocated. Otherwise, it is the offset to the BEGINNING 1332 of the first local allocated. 1333 1334 On the RS/6000, the frame pointer is the same as the stack pointer, 1335 except for dynamic allocations. So we start after the fixed area and 1336 outgoing parameter area. 1337 1338 If the function uses dynamic stack space (CALLS_ALLOCA is set), that 1339 space needs to be aligned to STACK_BOUNDARY, i.e. the sum of the 1340 sizes of the fixed area and the parameter area must be a multiple of 1341 STACK_BOUNDARY. */ 1342 1343 #define RS6000_STARTING_FRAME_OFFSET \ 1344 (cfun->calls_alloca \ 1345 ? (RS6000_ALIGN (crtl->outgoing_args_size + RS6000_SAVE_AREA, \ 1346 (TARGET_ALTIVEC || TARGET_VSX) ? 16 : 8 )) \ 1347 : (RS6000_ALIGN (crtl->outgoing_args_size, \ 1348 (TARGET_ALTIVEC || TARGET_VSX) ? 16 : 8) \ 1349 + RS6000_SAVE_AREA)) 1350 1351 /* Offset from the stack pointer register to an item dynamically 1352 allocated on the stack, e.g., by `alloca'. 1353 1354 The default value for this macro is `STACK_POINTER_OFFSET' plus the 1355 length of the outgoing arguments. The default is correct for most 1356 machines. See `function.c' for details. 1357 1358 This value must be a multiple of STACK_BOUNDARY (hard coded in 1359 `emit-rtl.c'). */ 1360 #define STACK_DYNAMIC_OFFSET(FUNDECL) \ 1361 RS6000_ALIGN (crtl->outgoing_args_size.to_constant () \ 1362 + STACK_POINTER_OFFSET, \ 1363 (TARGET_ALTIVEC || TARGET_VSX) ? 16 : 8) 1364 1365 /* If we generate an insn to push BYTES bytes, 1366 this says how many the stack pointer really advances by. 1367 On RS/6000, don't define this because there are no push insns. */ 1368 /* #define PUSH_ROUNDING(BYTES) */ 1369 1370 /* Offset of first parameter from the argument pointer register value. 1371 On the RS/6000, we define the argument pointer to the start of the fixed 1372 area. */ 1373 #define FIRST_PARM_OFFSET(FNDECL) RS6000_SAVE_AREA 1374 1375 /* Offset from the argument pointer register value to the top of 1376 stack. This is different from FIRST_PARM_OFFSET because of the 1377 register save area. */ 1378 #define ARG_POINTER_CFA_OFFSET(FNDECL) 0 1379 1380 /* Define this if stack space is still allocated for a parameter passed 1381 in a register. The value is the number of bytes allocated to this 1382 area. */ 1383 #define REG_PARM_STACK_SPACE(FNDECL) \ 1384 rs6000_reg_parm_stack_space ((FNDECL), false) 1385 1386 /* Define this macro if space guaranteed when compiling a function body 1387 is different to space required when making a call, a situation that 1388 can arise with K&R style function definitions. */ 1389 #define INCOMING_REG_PARM_STACK_SPACE(FNDECL) \ 1390 rs6000_reg_parm_stack_space ((FNDECL), true) 1391 1392 /* Define this if the above stack space is to be considered part of the 1393 space allocated by the caller. */ 1394 #define OUTGOING_REG_PARM_STACK_SPACE(FNTYPE) 1 1395 1396 /* This is the difference between the logical top of stack and the actual sp. 1397 1398 For the RS/6000, sp points past the fixed area. */ 1399 #define STACK_POINTER_OFFSET RS6000_SAVE_AREA 1400 1401 /* Define this if the maximum size of all the outgoing args is to be 1402 accumulated and pushed during the prologue. The amount can be 1403 found in the variable crtl->outgoing_args_size. */ 1404 #define ACCUMULATE_OUTGOING_ARGS 1 1405 1406 /* Define how to find the value returned by a library function 1407 assuming the value has mode MODE. */ 1408 1409 #define LIBCALL_VALUE(MODE) rs6000_libcall_value ((MODE)) 1410 1411 /* DRAFT_V4_STRUCT_RET defaults off. */ 1412 #define DRAFT_V4_STRUCT_RET 0 1413 1414 /* Let TARGET_RETURN_IN_MEMORY control what happens. */ 1415 #define DEFAULT_PCC_STRUCT_RETURN 0 1416 1417 /* Mode of stack savearea. 1418 FUNCTION is VOIDmode because calling convention maintains SP. 1419 BLOCK needs Pmode for SP. 1420 NONLOCAL needs twice Pmode to maintain both backchain and SP. */ 1421 #define STACK_SAVEAREA_MODE(LEVEL) \ 1422 (LEVEL == SAVE_FUNCTION ? VOIDmode \ 1423 : LEVEL == SAVE_NONLOCAL ? (TARGET_32BIT ? DImode : PTImode) : Pmode) 1424 1425 /* Minimum and maximum general purpose registers used to hold arguments. */ 1426 #define GP_ARG_MIN_REG 3 1427 #define GP_ARG_MAX_REG 10 1428 #define GP_ARG_NUM_REG (GP_ARG_MAX_REG - GP_ARG_MIN_REG + 1) 1429 1430 /* Minimum and maximum floating point registers used to hold arguments. */ 1431 #define FP_ARG_MIN_REG 33 1432 #define FP_ARG_AIX_MAX_REG 45 1433 #define FP_ARG_V4_MAX_REG 40 1434 #define FP_ARG_MAX_REG (DEFAULT_ABI == ABI_V4 \ 1435 ? FP_ARG_V4_MAX_REG : FP_ARG_AIX_MAX_REG) 1436 #define FP_ARG_NUM_REG (FP_ARG_MAX_REG - FP_ARG_MIN_REG + 1) 1437 1438 /* Minimum and maximum AltiVec registers used to hold arguments. */ 1439 #define ALTIVEC_ARG_MIN_REG (FIRST_ALTIVEC_REGNO + 2) 1440 #define ALTIVEC_ARG_MAX_REG (ALTIVEC_ARG_MIN_REG + 11) 1441 #define ALTIVEC_ARG_NUM_REG (ALTIVEC_ARG_MAX_REG - ALTIVEC_ARG_MIN_REG + 1) 1442 1443 /* Maximum number of registers per ELFv2 homogeneous aggregate argument. */ 1444 #define AGGR_ARG_NUM_REG 8 1445 1446 /* Return registers */ 1447 #define GP_ARG_RETURN GP_ARG_MIN_REG 1448 #define FP_ARG_RETURN FP_ARG_MIN_REG 1449 #define ALTIVEC_ARG_RETURN (FIRST_ALTIVEC_REGNO + 2) 1450 #define FP_ARG_MAX_RETURN (DEFAULT_ABI != ABI_ELFv2 ? FP_ARG_RETURN \ 1451 : (FP_ARG_RETURN + AGGR_ARG_NUM_REG - 1)) 1452 #define ALTIVEC_ARG_MAX_RETURN (DEFAULT_ABI != ABI_ELFv2 \ 1453 ? (ALTIVEC_ARG_RETURN \ 1454 + (TARGET_FLOAT128_TYPE ? 1 : 0)) \ 1455 : (ALTIVEC_ARG_RETURN + AGGR_ARG_NUM_REG - 1)) 1456 1457 /* Flags for the call/call_value rtl operations set up by function_arg */ 1458 #define CALL_NORMAL 0x00000000 /* no special processing */ 1459 /* Bits in 0x00000001 are unused. */ 1460 #define CALL_V4_CLEAR_FP_ARGS 0x00000002 /* V.4, no FP args passed */ 1461 #define CALL_V4_SET_FP_ARGS 0x00000004 /* V.4, FP args were passed */ 1462 #define CALL_LONG 0x00000008 /* always call indirect */ 1463 #define CALL_LIBCALL 0x00000010 /* libcall */ 1464 1465 /* Identify PLT sequence for rs6000_pltseq_template. */ 1466 enum rs6000_pltseq_enum { 1467 RS6000_PLTSEQ_TOCSAVE, 1468 RS6000_PLTSEQ_PLT16_HA, 1469 RS6000_PLTSEQ_PLT16_LO, 1470 RS6000_PLTSEQ_MTCTR, 1471 RS6000_PLTSEQ_PLT_PCREL34 1472 }; 1473 1474 #define IS_V4_FP_ARGS(OP) \ 1475 ((INTVAL (OP) & (CALL_V4_CLEAR_FP_ARGS | CALL_V4_SET_FP_ARGS)) != 0) 1476 1477 /* We don't have prologue and epilogue functions to save/restore 1478 everything for most ABIs. */ 1479 #define WORLD_SAVE_P(INFO) 0 1480 1481 /* 1 if N is a possible register number for a function value 1482 as seen by the caller. 1483 1484 On RS/6000, this is r3, fp1, and v2 (for AltiVec). */ 1485 #define FUNCTION_VALUE_REGNO_P(N) \ 1486 ((N) == GP_ARG_RETURN \ 1487 || (IN_RANGE ((N), FP_ARG_RETURN, FP_ARG_MAX_RETURN) \ 1488 && TARGET_HARD_FLOAT) \ 1489 || (IN_RANGE ((N), ALTIVEC_ARG_RETURN, ALTIVEC_ARG_MAX_RETURN) \ 1490 && TARGET_ALTIVEC && TARGET_ALTIVEC_ABI)) 1491 1492 /* 1 if N is a possible register number for function argument passing. 1493 On RS/6000, these are r3-r10 and fp1-fp13. 1494 On AltiVec, v2 - v13 are used for passing vectors. */ 1495 #define FUNCTION_ARG_REGNO_P(N) \ 1496 (IN_RANGE ((N), GP_ARG_MIN_REG, GP_ARG_MAX_REG) \ 1497 || (IN_RANGE ((N), ALTIVEC_ARG_MIN_REG, ALTIVEC_ARG_MAX_REG) \ 1498 && TARGET_ALTIVEC && TARGET_ALTIVEC_ABI) \ 1499 || (IN_RANGE ((N), FP_ARG_MIN_REG, FP_ARG_MAX_REG) \ 1500 && TARGET_HARD_FLOAT)) 1501 1502 /* Define a data type for recording info about an argument list 1503 during the scan of that argument list. This data type should 1504 hold all necessary information about the function itself 1505 and about the args processed so far, enough to enable macros 1506 such as FUNCTION_ARG to determine where the next arg should go. 1507 1508 On the RS/6000, this is a structure. The first element is the number of 1509 total argument words, the second is used to store the next 1510 floating-point register number, and the third says how many more args we 1511 have prototype types for. 1512 1513 For ABI_V4, we treat these slightly differently -- `sysv_gregno' is 1514 the next available GP register, `fregno' is the next available FP 1515 register, and `words' is the number of words used on the stack. 1516 1517 The varargs/stdarg support requires that this structure's size 1518 be a multiple of sizeof(int). */ 1519 1520 typedef struct rs6000_args 1521 { 1522 int words; /* # words used for passing GP registers */ 1523 int fregno; /* next available FP register */ 1524 int vregno; /* next available AltiVec register */ 1525 int nargs_prototype; /* # args left in the current prototype */ 1526 int prototype; /* Whether a prototype was defined */ 1527 int stdarg; /* Whether function is a stdarg function. */ 1528 int call_cookie; /* Do special things for this call */ 1529 int sysv_gregno; /* next available GP register */ 1530 int intoffset; /* running offset in struct (darwin64) */ 1531 int use_stack; /* any part of struct on stack (darwin64) */ 1532 int floats_in_gpr; /* count of SFmode floats taking up 1533 GPR space (darwin64) */ 1534 int named; /* false for varargs params */ 1535 int escapes; /* if function visible outside tu */ 1536 int libcall; /* If this is a compiler generated call. */ 1537 } CUMULATIVE_ARGS; 1538 1539 /* Initialize a variable CUM of type CUMULATIVE_ARGS 1540 for a call to a function whose data type is FNTYPE. 1541 For a library call, FNTYPE is 0. */ 1542 1543 #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, FNDECL, N_NAMED_ARGS) \ 1544 init_cumulative_args (&CUM, FNTYPE, LIBNAME, FALSE, FALSE, \ 1545 N_NAMED_ARGS, FNDECL, VOIDmode) 1546 1547 /* Similar, but when scanning the definition of a procedure. We always 1548 set NARGS_PROTOTYPE large so we never return an EXPR_LIST. */ 1549 1550 #define INIT_CUMULATIVE_INCOMING_ARGS(CUM, FNTYPE, LIBNAME) \ 1551 init_cumulative_args (&CUM, FNTYPE, LIBNAME, TRUE, FALSE, \ 1552 1000, current_function_decl, VOIDmode) 1553 1554 /* Like INIT_CUMULATIVE_ARGS' but only used for outgoing libcalls. */ 1555 1556 #define INIT_CUMULATIVE_LIBCALL_ARGS(CUM, MODE, LIBNAME) \ 1557 init_cumulative_args (&CUM, NULL_TREE, LIBNAME, FALSE, TRUE, \ 1558 0, NULL_TREE, MODE) 1559 1560 #define PAD_VARARGS_DOWN \ 1561 (targetm.calls.function_arg_padding (TYPE_MODE (type), type) == PAD_DOWNWARD) 1562 1563 /* Output assembler code to FILE to increment profiler label # LABELNO 1564 for profiling a function entry. */ 1565 1566 #define FUNCTION_PROFILER(FILE, LABELNO) \ 1567 output_function_profiler ((FILE), (LABELNO)); 1568 1569 /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function, 1570 the stack pointer does not matter. No definition is equivalent to 1571 always zero. 1572 1573 On the RS/6000, this is nonzero because we can restore the stack from 1574 its backpointer, which we maintain. */ 1575 #define EXIT_IGNORE_STACK 1 1576 1577 /* Define this macro as a C expression that is nonzero for registers 1578 that are used by the epilogue or the return' pattern. The stack 1579 and frame pointer registers are already be assumed to be used as 1580 needed. */ 1581 1582 #define EPILOGUE_USES(REGNO) \ 1583 ((reload_completed && (REGNO) == LR_REGNO) \ 1584 || (TARGET_ALTIVEC && (REGNO) == VRSAVE_REGNO) \ 1585 || (crtl->calls_eh_return \ 1586 && TARGET_AIX \ 1587 && (REGNO) == 2)) 1588 1589 1590 /* Length in units of the trampoline for entering a nested function. */ 1591 1592 #define TRAMPOLINE_SIZE rs6000_trampoline_size () 1593 1594 /* Definitions for __builtin_return_address and __builtin_frame_address. 1595 __builtin_return_address (0) should give link register (LR_REGNO), enable 1596 this. */ 1597 /* This should be uncommented, so that the link register is used, but 1598 currently this would result in unmatched insns and spilling fixed 1599 registers so we'll leave it for another day. When these problems are 1600 taken care of one additional fetch will be necessary in RETURN_ADDR_RTX. 1601 (mrs) */ 1602 /* #define RETURN_ADDR_IN_PREVIOUS_FRAME */ 1603 1604 /* Number of bytes into the frame return addresses can be found. See 1605 rs6000_stack_info in rs6000.c for more information on how the different 1606 abi's store the return address. */ 1607 #define RETURN_ADDRESS_OFFSET \ 1608 ((DEFAULT_ABI == ABI_V4 ? 4 : 8) << (TARGET_64BIT ? 1 : 0)) 1609 1610 /* The current return address is in the link register. The return address 1611 of anything farther back is accessed normally at an offset of 8 from the 1612 frame pointer. */ 1613 #define RETURN_ADDR_RTX(COUNT, FRAME) \ 1614 (rs6000_return_addr (COUNT, FRAME)) 1615 1616 1617 /* Definitions for register eliminations. 1618 1619 We have two registers that can be eliminated on the RS/6000. First, the 1620 frame pointer register can often be eliminated in favor of the stack 1621 pointer register. Secondly, the argument pointer register can always be 1622 eliminated; it is replaced with either the stack or frame pointer. 1623 1624 In addition, we use the elimination mechanism to see if r30 is needed 1625 Initially we assume that it isn't. If it is, we spill it. This is done 1626 by making it an eliminable register. We replace it with itself so that 1627 if it isn't needed, then existing uses won't be modified. */ 1628 1629 /* This is an array of structures. Each structure initializes one pair 1630 of eliminable registers. The "from" register number is given first, 1631 followed by "to". Eliminations of the same "from" register are listed 1632 in order of preference. */ 1633 #define ELIMINABLE_REGS \ 1634 {{ HARD_FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ 1635 { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ 1636 { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}, \ 1637 { ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ 1638 { ARG_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}, \ 1639 { RS6000_PIC_OFFSET_TABLE_REGNUM, RS6000_PIC_OFFSET_TABLE_REGNUM } } 1640 1641 /* Define the offset between two registers, one to be eliminated, and the other 1642 its replacement, at the start of a routine. */ 1643 #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \ 1644 ((OFFSET) = rs6000_initial_elimination_offset(FROM, TO)) 1645 1646 /* Addressing modes, and classification of registers for them. */ 1647 1648 #define HAVE_PRE_DECREMENT 1 1649 #define HAVE_PRE_INCREMENT 1 1650 #define HAVE_PRE_MODIFY_DISP 1 1651 #define HAVE_PRE_MODIFY_REG 1 1652 1653 /* Macros to check register numbers against specific register classes. */ 1654 1655 /* These assume that REGNO is a hard or pseudo reg number. 1656 They give nonzero only if REGNO is a hard reg of the suitable class 1657 or a pseudo reg currently allocated to a suitable hard reg. 1658 Since they use reg_renumber, they are safe only once reg_renumber 1659 has been allocated, which happens in reginfo.c during register 1660 allocation. */ 1661 1662 #define REGNO_OK_FOR_INDEX_P(REGNO) \ 1663 (HARD_REGISTER_NUM_P (REGNO) \ 1664 ? (REGNO) <= 31 \ 1665 || (REGNO) == ARG_POINTER_REGNUM \ 1666 || (REGNO) == FRAME_POINTER_REGNUM \ 1667 : (reg_renumber[REGNO] >= 0 \ 1668 && (reg_renumber[REGNO] <= 31 \ 1669 || reg_renumber[REGNO] == ARG_POINTER_REGNUM \ 1670 || reg_renumber[REGNO] == FRAME_POINTER_REGNUM))) 1671 1672 #define REGNO_OK_FOR_BASE_P(REGNO) \ 1673 (HARD_REGISTER_NUM_P (REGNO) \ 1674 ? ((REGNO) > 0 && (REGNO) <= 31) \ 1675 || (REGNO) == ARG_POINTER_REGNUM \ 1676 || (REGNO) == FRAME_POINTER_REGNUM \ 1677 : (reg_renumber[REGNO] > 0 \ 1678 && (reg_renumber[REGNO] <= 31 \ 1679 || reg_renumber[REGNO] == ARG_POINTER_REGNUM \ 1680 || reg_renumber[REGNO] == FRAME_POINTER_REGNUM))) 1681 1682 /* Nonzero if X is a hard reg that can be used as an index 1683 or if it is a pseudo reg in the non-strict case. */ 1684 #define INT_REG_OK_FOR_INDEX_P(X, STRICT) \ 1685 ((!(STRICT) && !HARD_REGISTER_P (X)) \ 1686 || REGNO_OK_FOR_INDEX_P (REGNO (X))) 1687 1688 /* Nonzero if X is a hard reg that can be used as a base reg 1689 or if it is a pseudo reg in the non-strict case. */ 1690 #define INT_REG_OK_FOR_BASE_P(X, STRICT) \ 1691 ((!(STRICT) && !HARD_REGISTER_P (X)) \ 1692 || REGNO_OK_FOR_BASE_P (REGNO (X))) 1693 1694 1695 /* Maximum number of registers that can appear in a valid memory address. */ 1696 1697 #define MAX_REGS_PER_ADDRESS 2 1698 1699 /* Recognize any constant value that is a valid address. */ 1700 1701 #define CONSTANT_ADDRESS_P(X) \ 1702 (GET_CODE (X) == LABEL_REF || SYMBOL_REF_P (X) \ 1703 || CONST_INT_P (X) || GET_CODE (X) == CONST \ 1704 || GET_CODE (X) == HIGH) 1705 1706 #define EASY_VECTOR_15(n) ((n) >= -16 && (n) <= 15) 1707 #define EASY_VECTOR_15_ADD_SELF(n) (!EASY_VECTOR_15((n)) \ 1708 && EASY_VECTOR_15((n) >> 1) \ 1709 && ((n) & 1) == 0) 1710 1711 #define EASY_VECTOR_MSB(n,mode) \ 1712 ((((unsigned HOST_WIDE_INT) (n)) & GET_MODE_MASK (mode)) == \ 1713 ((((unsigned HOST_WIDE_INT)GET_MODE_MASK (mode)) + 1) >> 1)) 1714 1715 1716 #define FIND_BASE_TERM rs6000_find_base_term 1717 1718 /* The register number of the register used to address a table of 1719 static data addresses in memory. In some cases this register is 1720 defined by a processor's "application binary interface" (ABI). 1721 When this macro is defined, RTL is generated for this register 1722 once, as with the stack pointer and frame pointer registers. If 1723 this macro is not defined, it is up to the machine-dependent files 1724 to allocate such a register (if necessary). */ 1725 1726 #define RS6000_PIC_OFFSET_TABLE_REGNUM 30 1727 #define PIC_OFFSET_TABLE_REGNUM \ 1728 (TARGET_TOC ? TOC_REGISTER \ 1729 : flag_pic ? RS6000_PIC_OFFSET_TABLE_REGNUM \ 1730 : INVALID_REGNUM) 1731 1732 #define TOC_REGISTER (TARGET_MINIMAL_TOC ? RS6000_PIC_OFFSET_TABLE_REGNUM : 2) 1733 1734 /* Define this macro if the register defined by 1735 `PIC_OFFSET_TABLE_REGNUM' is clobbered by calls. Do not define 1736 this macro if `PIC_OFFSET_TABLE_REGNUM' is not defined. */ 1737 1738 /* #define PIC_OFFSET_TABLE_REG_CALL_CLOBBERED */ 1739 1740 /* A C expression that is nonzero if X is a legitimate immediate 1741 operand on the target machine when generating position independent 1742 code. You can assume that X satisfies `CONSTANT_P', so you need 1743 not check this. You can also assume FLAG_PIC is true, so you need 1744 not check it either. You need not define this macro if all 1745 constants (including `SYMBOL_REF') can be immediate operands when 1746 generating position independent code. */ 1747 1748 /* #define LEGITIMATE_PIC_OPERAND_P (X) */ 1749 1750 /* Define as C expression which evaluates to nonzero if the tablejump 1751 instruction expects the table to contain offsets from the address of the 1752 table. 1753 Do not define this if the table should contain absolute addresses. */ 1754 #define CASE_VECTOR_PC_RELATIVE rs6000_relative_jumptables 1755 1756 /* Specify the machine mode that this machine uses 1757 for the index in the tablejump instruction. */ 1758 #define CASE_VECTOR_MODE (rs6000_relative_jumptables ? SImode : Pmode) 1759 1760 /* Define this as 1 if `char' should by default be signed; else as 0. */ 1761 #define DEFAULT_SIGNED_CHAR 0 1762 1763 /* An integer expression for the size in bits of the largest integer machine 1764 mode that should actually be used. */ 1765 1766 /* Allow pairs of registers to be used, which is the intent of the default. */ 1767 #define MAX_FIXED_MODE_SIZE GET_MODE_BITSIZE (TARGET_POWERPC64 ? TImode : DImode) 1768 1769 /* Max number of bytes we can move from memory to memory 1770 in one reasonably fast instruction. */ 1771 #define MOVE_MAX (! TARGET_POWERPC64 ? 4 : 8) 1772 #define MAX_MOVE_MAX 8 1773 1774 /* Nonzero if access to memory by bytes is no faster than for words. 1775 Also nonzero if doing byte operations (specifically shifts) in registers 1776 is undesirable. */ 1777 #define SLOW_BYTE_ACCESS 1 1778 1779 /* Define if loading in MODE, an integral mode narrower than BITS_PER_WORD 1780 will either zero-extend or sign-extend. The value of this macro should 1781 be the code that says which one of the two operations is implicitly 1782 done, UNKNOWN if none. */ 1783 #define LOAD_EXTEND_OP(MODE) ZERO_EXTEND 1784 1785 /* Define if loading short immediate values into registers sign extends. */ 1786 #define SHORT_IMMEDIATES_SIGN_EXTEND 1 1787 1788 /* The cntlzw and cntlzd instructions return 32 and 64 for input of zero. */ 1789 #define CLZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) \ 1790 ((VALUE) = GET_MODE_BITSIZE (MODE), 2) 1791 1792 /* The CTZ patterns that are implemented in terms of CLZ return -1 for input of 1793 zero. The hardware instructions added in Power9 and the sequences using 1794 popcount return 32 or 64. */ 1795 #define CTZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) \ 1796 (TARGET_CTZ || TARGET_POPCNTD \ 1797 ? ((VALUE) = GET_MODE_BITSIZE (MODE), 2) \ 1798 : ((VALUE) = -1, 2)) 1799 1800 /* Specify the machine mode that pointers have. 1801 After generation of rtl, the compiler makes no further distinction 1802 between pointers and any other objects of this machine mode. */ 1803 extern scalar_int_mode rs6000_pmode; 1804 #define Pmode rs6000_pmode 1805 1806 /* Supply definition of STACK_SIZE_MODE for allocate_dynamic_stack_space. */ 1807 #define STACK_SIZE_MODE (TARGET_32BIT ? SImode : DImode) 1808 1809 /* Mode of a function address in a call instruction (for indexing purposes). 1810 Doesn't matter on RS/6000. */ 1811 #define FUNCTION_MODE SImode 1812 1813 /* Define this if addresses of constant functions 1814 shouldn't be put through pseudo regs where they can be cse'd. 1815 Desirable on machines where ordinary constants are expensive 1816 but a CALL with constant address is cheap. */ 1817 #define NO_FUNCTION_CSE 1 1818 1819 /* Define this to be nonzero if shift instructions ignore all but the low-order 1820 few bits. 1821 1822 The sle and sre instructions which allow SHIFT_COUNT_TRUNCATED 1823 have been dropped from the PowerPC architecture. */ 1824 #define SHIFT_COUNT_TRUNCATED 0 1825 1826 /* Adjust the length of an INSN. LENGTH is the currently-computed length and 1827 should be adjusted to reflect any required changes. This macro is used when 1828 there is some systematic length adjustment required that would be difficult 1829 to express in the length attribute. 1830 1831 In the PowerPC, we use this to adjust the length of an instruction if one or 1832 more prefixed instructions are generated, using the attribute 1833 num_prefixed_insns. A prefixed instruction is 8 bytes instead of 4, but the 1834 hardware requires that a prefied instruciton does not cross a 64-byte 1835 boundary. This means the compiler has to assume the length of the first 1836 prefixed instruction is 12 bytes instead of 8 bytes. Since the length is 1837 already set for the non-prefixed instruction, we just need to udpate for the 1838 difference. */ 1839 1840 #define ADJUST_INSN_LENGTH(INSN,LENGTH) \ 1841 (LENGTH) = rs6000_adjust_insn_length ((INSN), (LENGTH)) 1842 1843 /* Given a comparison code (EQ, NE, etc.) and the first operand of a 1844 COMPARE, return the mode to be used for the comparison. For 1845 floating-point, CCFPmode should be used. CCUNSmode should be used 1846 for unsigned comparisons. CCEQmode should be used when we are 1847 doing an inequality comparison on the result of a 1848 comparison. CCmode should be used in all other cases. */ 1849 1850 #define SELECT_CC_MODE(OP,X,Y) \ 1851 (SCALAR_FLOAT_MODE_P (GET_MODE (X)) ? CCFPmode \ 1852 : (OP) == GTU || (OP) == LTU || (OP) == GEU || (OP) == LEU ? CCUNSmode \ 1853 : (((OP) == EQ || (OP) == NE) && COMPARISON_P (X) \ 1854 ? CCEQmode : CCmode)) 1855 1856 /* Can the condition code MODE be safely reversed? This is safe in 1857 all cases on this port, because at present it doesn't use the 1858 trapping FP comparisons (fcmpo). */ 1859 #define REVERSIBLE_CC_MODE(MODE) 1 1860 1861 /* Given a condition code and a mode, return the inverse condition. */ 1862 #define REVERSE_CONDITION(CODE, MODE) rs6000_reverse_condition (MODE, CODE) 1863 1864 1865 /* Target cpu costs. */ 1866 1867 struct processor_costs { 1868 const int mulsi; /* cost of SImode multiplication. */ 1869 const int mulsi_const; /* cost of SImode multiplication by constant. */ 1870 const int mulsi_const9; /* cost of SImode mult by short constant. */ 1871 const int muldi; /* cost of DImode multiplication. */ 1872 const int divsi; /* cost of SImode division. */ 1873 const int divdi; /* cost of DImode division. */ 1874 const int fp; /* cost of simple SFmode and DFmode insns. */ 1875 const int dmul; /* cost of DFmode multiplication (and fmadd). */ 1876 const int sdiv; /* cost of SFmode division (fdivs). */ 1877 const int ddiv; /* cost of DFmode division (fdiv). */ 1878 const int cache_line_size; /* cache line size in bytes. */ 1879 const int l1_cache_size; /* size of l1 cache, in kilobytes. */ 1880 const int l2_cache_size; /* size of l2 cache, in kilobytes. */ 1881 const int simultaneous_prefetches; /* number of parallel prefetch 1882 operations. */ 1883 const int sfdf_convert; /* cost of SF->DF conversion. */ 1884 }; 1885 1886 extern const struct processor_costs *rs6000_cost; 1887 1888 /* Control the assembler format that we output. */ 1889 1890 /* A C string constant describing how to begin a comment in the target 1891 assembler language. The compiler assumes that the comment will end at 1892 the end of the line. */ 1893 #define ASM_COMMENT_START " #" 1894 1895 /* Flag to say the TOC is initialized */ 1896 extern int toc_initialized; 1897 1898 /* Macro to output a special constant pool entry. Go to WIN if we output 1899 it. Otherwise, it is written the usual way. 1900 1901 On the RS/6000, toc entries are handled this way. */ 1902 1903 #define ASM_OUTPUT_SPECIAL_POOL_ENTRY(FILE, X, MODE, ALIGN, LABELNO, WIN) \ 1904 { if (ASM_OUTPUT_SPECIAL_POOL_ENTRY_P (X, MODE)) \ 1905 { \ 1906 output_toc (FILE, X, LABELNO, MODE); \ 1907 goto WIN; \ 1908 } \ 1909 } 1910 1911 #ifdef HAVE_GAS_WEAK 1912 #define RS6000_WEAK 1 1913 #else 1914 #define RS6000_WEAK 0 1915 #endif 1916 1917 #if RS6000_WEAK 1918 /* Used in lieu of ASM_WEAKEN_LABEL. */ 1919 #define ASM_WEAKEN_DECL(FILE, DECL, NAME, VAL) \ 1920 rs6000_asm_weaken_decl ((FILE), (DECL), (NAME), (VAL)) 1921 #endif 1922 1923 #if HAVE_GAS_WEAKREF 1924 #define ASM_OUTPUT_WEAKREF(FILE, DECL, NAME, VALUE) \ 1925 do \ 1926 { \ 1927 fputs ("\t.weakref\t", (FILE)); \ 1928 RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \ 1929 fputs (", ", (FILE)); \ 1930 RS6000_OUTPUT_BASENAME ((FILE), (VALUE)); \ 1931 if ((DECL) && TREE_CODE (DECL) == FUNCTION_DECL \ 1932 && DEFAULT_ABI == ABI_AIX && DOT_SYMBOLS) \ 1933 { \ 1934 fputs ("\n\t.weakref\t.", (FILE)); \ 1935 RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \ 1936 fputs (", .", (FILE)); \ 1937 RS6000_OUTPUT_BASENAME ((FILE), (VALUE)); \ 1938 } \ 1939 fputc ('\n', (FILE)); \ 1940 } while (0) 1941 #endif 1942 1943 /* This implements the `alias' attribute. */ 1944 #undef ASM_OUTPUT_DEF_FROM_DECLS 1945 #define ASM_OUTPUT_DEF_FROM_DECLS(FILE, DECL, TARGET) \ 1946 do \ 1947 { \ 1948 const char *alias = XSTR (XEXP (DECL_RTL (DECL), 0), 0); \ 1949 const char *name = IDENTIFIER_POINTER (TARGET); \ 1950 if (TREE_CODE (DECL) == FUNCTION_DECL \ 1951 && DEFAULT_ABI == ABI_AIX && DOT_SYMBOLS) \ 1952 { \ 1953 if (TREE_PUBLIC (DECL)) \ 1954 { \ 1955 if (!RS6000_WEAK || !DECL_WEAK (DECL)) \ 1956 { \ 1957 fputs ("\t.globl\t.", FILE); \ 1958 RS6000_OUTPUT_BASENAME (FILE, alias); \ 1959 putc ('\n', FILE); \ 1960 } \ 1961 } \ 1962 else if (TARGET_XCOFF) \ 1963 { \ 1964 if (!RS6000_WEAK || !DECL_WEAK (DECL)) \ 1965 { \ 1966 fputs ("\t.lglobl\t.", FILE); \ 1967 RS6000_OUTPUT_BASENAME (FILE, alias); \ 1968 putc ('\n', FILE); \ 1969 fputs ("\t.lglobl\t", FILE); \ 1970 RS6000_OUTPUT_BASENAME (FILE, alias); \ 1971 putc ('\n', FILE); \ 1972 } \ 1973 } \ 1974 fputs ("\t.set\t.", FILE); \ 1975 RS6000_OUTPUT_BASENAME (FILE, alias); \ 1976 fputs (",.", FILE); \ 1977 RS6000_OUTPUT_BASENAME (FILE, name); \ 1978 fputc ('\n', FILE); \ 1979 } \ 1980 ASM_OUTPUT_DEF (FILE, alias, name); \ 1981 } \ 1982 while (0) 1983 1984 #define TARGET_ASM_FILE_START rs6000_file_start 1985 1986 /* Output to assembler file text saying following lines 1987 may contain character constants, extra white space, comments, etc. */ 1988 1989 #define ASM_APP_ON "" 1990 1991 /* Output to assembler file text saying following lines 1992 no longer contain unusual constructs. */ 1993 1994 #define ASM_APP_OFF "" 1995 1996 /* How to refer to registers in assembler output. 1997 This sequence is indexed by compiler's hard-register-number (see above). */ 1998 1999 extern char rs6000_reg_names[][8]; /* register names (0 vs. %r0). */ 2000 2001 #define REGISTER_NAMES \ 2002 { \ 2003 &rs6000_reg_names[ 0][0], /* r0 */ \ 2004 &rs6000_reg_names[ 1][0], /* r1 */ \ 2005 &rs6000_reg_names[ 2][0], /* r2 */ \ 2006 &rs6000_reg_names[ 3][0], /* r3 */ \ 2007 &rs6000_reg_names[ 4][0], /* r4 */ \ 2008 &rs6000_reg_names[ 5][0], /* r5 */ \ 2009 &rs6000_reg_names[ 6][0], /* r6 */ \ 2010 &rs6000_reg_names[ 7][0], /* r7 */ \ 2011 &rs6000_reg_names[ 8][0], /* r8 */ \ 2012 &rs6000_reg_names[ 9][0], /* r9 */ \ 2013 &rs6000_reg_names[10][0], /* r10 */ \ 2014 &rs6000_reg_names[11][0], /* r11 */ \ 2015 &rs6000_reg_names[12][0], /* r12 */ \ 2016 &rs6000_reg_names[13][0], /* r13 */ \ 2017 &rs6000_reg_names[14][0], /* r14 */ \ 2018 &rs6000_reg_names[15][0], /* r15 */ \ 2019 &rs6000_reg_names[16][0], /* r16 */ \ 2020 &rs6000_reg_names[17][0], /* r17 */ \ 2021 &rs6000_reg_names[18][0], /* r18 */ \ 2022 &rs6000_reg_names[19][0], /* r19 */ \ 2023 &rs6000_reg_names[20][0], /* r20 */ \ 2024 &rs6000_reg_names[21][0], /* r21 */ \ 2025 &rs6000_reg_names[22][0], /* r22 */ \ 2026 &rs6000_reg_names[23][0], /* r23 */ \ 2027 &rs6000_reg_names[24][0], /* r24 */ \ 2028 &rs6000_reg_names[25][0], /* r25 */ \ 2029 &rs6000_reg_names[26][0], /* r26 */ \ 2030 &rs6000_reg_names[27][0], /* r27 */ \ 2031 &rs6000_reg_names[28][0], /* r28 */ \ 2032 &rs6000_reg_names[29][0], /* r29 */ \ 2033 &rs6000_reg_names[30][0], /* r30 */ \ 2034 &rs6000_reg_names[31][0], /* r31 */ \ 2035 \ 2036 &rs6000_reg_names[32][0], /* fr0 */ \ 2037 &rs6000_reg_names[33][0], /* fr1 */ \ 2038 &rs6000_reg_names[34][0], /* fr2 */ \ 2039 &rs6000_reg_names[35][0], /* fr3 */ \ 2040 &rs6000_reg_names[36][0], /* fr4 */ \ 2041 &rs6000_reg_names[37][0], /* fr5 */ \ 2042 &rs6000_reg_names[38][0], /* fr6 */ \ 2043 &rs6000_reg_names[39][0], /* fr7 */ \ 2044 &rs6000_reg_names[40][0], /* fr8 */ \ 2045 &rs6000_reg_names[41][0], /* fr9 */ \ 2046 &rs6000_reg_names[42][0], /* fr10 */ \ 2047 &rs6000_reg_names[43][0], /* fr11 */ \ 2048 &rs6000_reg_names[44][0], /* fr12 */ \ 2049 &rs6000_reg_names[45][0], /* fr13 */ \ 2050 &rs6000_reg_names[46][0], /* fr14 */ \ 2051 &rs6000_reg_names[47][0], /* fr15 */ \ 2052 &rs6000_reg_names[48][0], /* fr16 */ \ 2053 &rs6000_reg_names[49][0], /* fr17 */ \ 2054 &rs6000_reg_names[50][0], /* fr18 */ \ 2055 &rs6000_reg_names[51][0], /* fr19 */ \ 2056 &rs6000_reg_names[52][0], /* fr20 */ \ 2057 &rs6000_reg_names[53][0], /* fr21 */ \ 2058 &rs6000_reg_names[54][0], /* fr22 */ \ 2059 &rs6000_reg_names[55][0], /* fr23 */ \ 2060 &rs6000_reg_names[56][0], /* fr24 */ \ 2061 &rs6000_reg_names[57][0], /* fr25 */ \ 2062 &rs6000_reg_names[58][0], /* fr26 */ \ 2063 &rs6000_reg_names[59][0], /* fr27 */ \ 2064 &rs6000_reg_names[60][0], /* fr28 */ \ 2065 &rs6000_reg_names[61][0], /* fr29 */ \ 2066 &rs6000_reg_names[62][0], /* fr30 */ \ 2067 &rs6000_reg_names[63][0], /* fr31 */ \ 2068 \ 2069 &rs6000_reg_names[64][0], /* vr0 */ \ 2070 &rs6000_reg_names[65][0], /* vr1 */ \ 2071 &rs6000_reg_names[66][0], /* vr2 */ \ 2072 &rs6000_reg_names[67][0], /* vr3 */ \ 2073 &rs6000_reg_names[68][0], /* vr4 */ \ 2074 &rs6000_reg_names[69][0], /* vr5 */ \ 2075 &rs6000_reg_names[70][0], /* vr6 */ \ 2076 &rs6000_reg_names[71][0], /* vr7 */ \ 2077 &rs6000_reg_names[72][0], /* vr8 */ \ 2078 &rs6000_reg_names[73][0], /* vr9 */ \ 2079 &rs6000_reg_names[74][0], /* vr10 */ \ 2080 &rs6000_reg_names[75][0], /* vr11 */ \ 2081 &rs6000_reg_names[76][0], /* vr12 */ \ 2082 &rs6000_reg_names[77][0], /* vr13 */ \ 2083 &rs6000_reg_names[78][0], /* vr14 */ \ 2084 &rs6000_reg_names[79][0], /* vr15 */ \ 2085 &rs6000_reg_names[80][0], /* vr16 */ \ 2086 &rs6000_reg_names[81][0], /* vr17 */ \ 2087 &rs6000_reg_names[82][0], /* vr18 */ \ 2088 &rs6000_reg_names[83][0], /* vr19 */ \ 2089 &rs6000_reg_names[84][0], /* vr20 */ \ 2090 &rs6000_reg_names[85][0], /* vr21 */ \ 2091 &rs6000_reg_names[86][0], /* vr22 */ \ 2092 &rs6000_reg_names[87][0], /* vr23 */ \ 2093 &rs6000_reg_names[88][0], /* vr24 */ \ 2094 &rs6000_reg_names[89][0], /* vr25 */ \ 2095 &rs6000_reg_names[90][0], /* vr26 */ \ 2096 &rs6000_reg_names[91][0], /* vr27 */ \ 2097 &rs6000_reg_names[92][0], /* vr28 */ \ 2098 &rs6000_reg_names[93][0], /* vr29 */ \ 2099 &rs6000_reg_names[94][0], /* vr30 */ \ 2100 &rs6000_reg_names[95][0], /* vr31 */ \ 2101 \ 2102 &rs6000_reg_names[96][0], /* lr */ \ 2103 &rs6000_reg_names[97][0], /* ctr */ \ 2104 &rs6000_reg_names[98][0], /* ca */ \ 2105 &rs6000_reg_names[99][0], /* ap */ \ 2106 \ 2107 &rs6000_reg_names[100][0], /* cr0 */ \ 2108 &rs6000_reg_names[101][0], /* cr1 */ \ 2109 &rs6000_reg_names[102][0], /* cr2 */ \ 2110 &rs6000_reg_names[103][0], /* cr3 */ \ 2111 &rs6000_reg_names[104][0], /* cr4 */ \ 2112 &rs6000_reg_names[105][0], /* cr5 */ \ 2113 &rs6000_reg_names[106][0], /* cr6 */ \ 2114 &rs6000_reg_names[107][0], /* cr7 */ \ 2115 \ 2116 &rs6000_reg_names[108][0], /* vrsave */ \ 2117 &rs6000_reg_names[109][0], /* vscr */ \ 2118 \ 2119 &rs6000_reg_names[110][0] /* sfp */ \ 2120 } 2121 2122 /* Table of additional register names to use in user input. */ 2123 2124 #define ADDITIONAL_REGISTER_NAMES \ 2125 {{"r0", 0}, {"r1", 1}, {"r2", 2}, {"r3", 3}, \ 2126 {"r4", 4}, {"r5", 5}, {"r6", 6}, {"r7", 7}, \ 2127 {"r8", 8}, {"r9", 9}, {"r10", 10}, {"r11", 11}, \ 2128 {"r12", 12}, {"r13", 13}, {"r14", 14}, {"r15", 15}, \ 2129 {"r16", 16}, {"r17", 17}, {"r18", 18}, {"r19", 19}, \ 2130 {"r20", 20}, {"r21", 21}, {"r22", 22}, {"r23", 23}, \ 2131 {"r24", 24}, {"r25", 25}, {"r26", 26}, {"r27", 27}, \ 2132 {"r28", 28}, {"r29", 29}, {"r30", 30}, {"r31", 31}, \ 2133 {"fr0", 32}, {"fr1", 33}, {"fr2", 34}, {"fr3", 35}, \ 2134 {"fr4", 36}, {"fr5", 37}, {"fr6", 38}, {"fr7", 39}, \ 2135 {"fr8", 40}, {"fr9", 41}, {"fr10", 42}, {"fr11", 43}, \ 2136 {"fr12", 44}, {"fr13", 45}, {"fr14", 46}, {"fr15", 47}, \ 2137 {"fr16", 48}, {"fr17", 49}, {"fr18", 50}, {"fr19", 51}, \ 2138 {"fr20", 52}, {"fr21", 53}, {"fr22", 54}, {"fr23", 55}, \ 2139 {"fr24", 56}, {"fr25", 57}, {"fr26", 58}, {"fr27", 59}, \ 2140 {"fr28", 60}, {"fr29", 61}, {"fr30", 62}, {"fr31", 63}, \ 2141 {"v0", 64}, {"v1", 65}, {"v2", 66}, {"v3", 67}, \ 2142 {"v4", 68}, {"v5", 69}, {"v6", 70}, {"v7", 71}, \ 2143 {"v8", 72}, {"v9", 73}, {"v10", 74}, {"v11", 75}, \ 2144 {"v12", 76}, {"v13", 77}, {"v14", 78}, {"v15", 79}, \ 2145 {"v16", 80}, {"v17", 81}, {"v18", 82}, {"v19", 83}, \ 2146 {"v20", 84}, {"v21", 85}, {"v22", 86}, {"v23", 87}, \ 2147 {"v24", 88}, {"v25", 89}, {"v26", 90}, {"v27", 91}, \ 2148 {"v28", 92}, {"v29", 93}, {"v30", 94}, {"v31", 95}, \ 2149 {"vrsave", 108}, {"vscr", 109}, \ 2150 /* no additional names for: lr, ctr, ap */ \ 2151 {"cr0", 100},{"cr1", 101},{"cr2", 102},{"cr3", 103}, \ 2152 {"cr4", 104},{"cr5", 105},{"cr6", 106},{"cr7", 107}, \ 2153 {"cc", 100},{"sp", 1}, {"toc", 2}, \ 2154 /* CA is only part of XER, but we do not model the other parts (yet). */ \ 2155 {"xer", 98}, \ 2156 /* VSX registers overlaid on top of FR, Altivec registers */ \ 2157 {"vs0", 32}, {"vs1", 33}, {"vs2", 34}, {"vs3", 35}, \ 2158 {"vs4", 36}, {"vs5", 37}, {"vs6", 38}, {"vs7", 39}, \ 2159 {"vs8", 40}, {"vs9", 41}, {"vs10", 42}, {"vs11", 43}, \ 2160 {"vs12", 44}, {"vs13", 45}, {"vs14", 46}, {"vs15", 47}, \ 2161 {"vs16", 48}, {"vs17", 49}, {"vs18", 50}, {"vs19", 51}, \ 2162 {"vs20", 52}, {"vs21", 53}, {"vs22", 54}, {"vs23", 55}, \ 2163 {"vs24", 56}, {"vs25", 57}, {"vs26", 58}, {"vs27", 59}, \ 2164 {"vs28", 60}, {"vs29", 61}, {"vs30", 62}, {"vs31", 63}, \ 2165 {"vs32", 64}, {"vs33", 65}, {"vs34", 66}, {"vs35", 67}, \ 2166 {"vs36", 68}, {"vs37", 69}, {"vs38", 70}, {"vs39", 71}, \ 2167 {"vs40", 72}, {"vs41", 73}, {"vs42", 74}, {"vs43", 75}, \ 2168 {"vs44", 76}, {"vs45", 77}, {"vs46", 78}, {"vs47", 79}, \ 2169 {"vs48", 80}, {"vs49", 81}, {"vs50", 82}, {"vs51", 83}, \ 2170 {"vs52", 84}, {"vs53", 85}, {"vs54", 86}, {"vs55", 87}, \ 2171 {"vs56", 88}, {"vs57", 89}, {"vs58", 90}, {"vs59", 91}, \ 2172 {"vs60", 92}, {"vs61", 93}, {"vs62", 94}, {"vs63", 95}, \ 2173 } 2174 2175 /* This is how to output an element of a case-vector that is relative. */ 2176 2177 #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \ 2178 do { char buf[100]; \ 2179 fputs ("\t.long ", FILE); \ 2180 ASM_GENERATE_INTERNAL_LABEL (buf, "L", VALUE); \ 2181 assemble_name (FILE, buf); \ 2182 putc ('-', FILE); \ 2183 ASM_GENERATE_INTERNAL_LABEL (buf, "L", REL); \ 2184 assemble_name (FILE, buf); \ 2185 putc ('\n', FILE); \ 2186 } while (0) 2187 2188 /* This is how to output an element of a case-vector 2189 that is non-relative. */ 2190 #define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \ 2191 rs6000_output_addr_vec_elt ((FILE), (VALUE)) 2192 2193 /* This is how to output an assembler line 2194 that says to advance the location counter 2195 to a multiple of 2**LOG bytes. */ 2196 2197 #define ASM_OUTPUT_ALIGN(FILE,LOG) \ 2198 if ((LOG) != 0) \ 2199 fprintf (FILE, "\t.align %d\n", (LOG)) 2200 2201 /* How to align the given loop. */ 2202 #define LOOP_ALIGN(LABEL) rs6000_loop_align(LABEL) 2203 2204 /* Alignment guaranteed by __builtin_malloc. */ 2205 /* FIXME: 128-bit alignment is guaranteed by glibc for TARGET_64BIT. 2206 However, specifying the stronger guarantee currently leads to 2207 a regression in SPEC CPU2006 437.leslie3d. The stronger 2208 guarantee should be implemented here once that's fixed. */ 2209 #define MALLOC_ABI_ALIGNMENT (64) 2210 2211 /* Pick up the return address upon entry to a procedure. Used for 2212 dwarf2 unwind information. This also enables the table driven 2213 mechanism. */ 2214 2215 #define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (Pmode, LR_REGNO) 2216 #define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (LR_REGNO) 2217 2218 /* Describe how we implement __builtin_eh_return. */ 2219 #define EH_RETURN_DATA_REGNO(N) ((N) < 4 ? (N) + 3 : INVALID_REGNUM) 2220 #define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, 10) 2221 2222 /* Print operand X (an rtx) in assembler syntax to file FILE. 2223 CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified. 2224 For `%' followed by punctuation, CODE is the punctuation and X is null. */ 2225 2226 #define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE) 2227 2228 /* Define which CODE values are valid. */ 2229 2230 #define PRINT_OPERAND_PUNCT_VALID_P(CODE) ((CODE) == '&') 2231 2232 /* Print a memory address as an operand to reference that memory location. */ 2233 2234 #define PRINT_OPERAND_ADDRESS(FILE, ADDR) print_operand_address (FILE, ADDR) 2235 2236 /* For switching between functions with different target attributes. */ 2237 #define SWITCHABLE_TARGET 1 2238 2239 /* uncomment for disabling the corresponding default options */ 2240 /* #define MACHINE_no_sched_interblock */ 2241 /* #define MACHINE_no_sched_speculative */ 2242 /* #define MACHINE_no_sched_speculative_load */ 2243 2244 /* General flags. */ 2245 extern int frame_pointer_needed; 2246 2247 /* Classification of the builtin functions as to which switches enable the 2248 builtin, and what attributes it should have. We used to use the target 2249 flags macros, but we've run out of bits, so we now map the options into new 2250 settings used here. */ 2251 2252 /* Builtin operand count. */ 2253 #define RS6000_BTC_UNARY 0x00000001 /* normal unary function. */ 2254 #define RS6000_BTC_BINARY 0x00000002 /* normal binary function. */ 2255 #define RS6000_BTC_TERNARY 0x00000003 /* normal ternary function. */ 2256 #define RS6000_BTC_QUATERNARY 0x00000004 /* normal quaternary 2257 function. */ 2258 #define RS6000_BTC_QUINARY 0x00000005 /* normal quinary function. */ 2259 #define RS6000_BTC_SENARY 0x00000006 /* normal senary function. */ 2260 #define RS6000_BTC_OPND_MASK 0x00000007 /* Mask to isolate operands. */ 2261 2262 /* Builtin attributes. */ 2263 #define RS6000_BTC_SPECIAL 0x00000000 /* Special function. */ 2264 #define RS6000_BTC_PREDICATE 0x00000008 /* predicate function. */ 2265 #define RS6000_BTC_ABS 0x00000010 /* Altivec/VSX ABS 2266 function. */ 2267 #define RS6000_BTC_DST 0x00000020 /* Altivec DST function. */ 2268 2269 #define RS6000_BTC_TYPE_MASK 0x0000003f /* Mask to isolate types */ 2270 2271 #define RS6000_BTC_MISC 0x00000000 /* No special attributes. */ 2272 #define RS6000_BTC_CONST 0x00000100 /* Neither uses, nor 2273 modifies global state. */ 2274 #define RS6000_BTC_PURE 0x00000200 /* reads global 2275 state/mem and does 2276 not modify global state. */ 2277 #define RS6000_BTC_FP 0x00000400 /* depends on rounding mode. */ 2278 #define RS6000_BTC_QUAD 0x00000800 /* Uses a register quad. */ 2279 #define RS6000_BTC_PAIR 0x00001000 /* Uses a register pair. */ 2280 #define RS6000_BTC_QUADPAIR 0x00001800 /* Uses a quad and a pair. */ 2281 #define RS6000_BTC_ATTR_MASK 0x00001f00 /* Mask of the attributes. */ 2282 2283 /* Miscellaneous information. */ 2284 #define RS6000_BTC_SPR 0x01000000 /* function references SPRs. */ 2285 #define RS6000_BTC_VOID 0x02000000 /* function has no return value. */ 2286 #define RS6000_BTC_CR 0x04000000 /* function references a CR. */ 2287 #define RS6000_BTC_OVERLOADED 0x08000000 /* function is overloaded. */ 2288 #define RS6000_BTC_GIMPLE 0x10000000 /* function should be expanded 2289 into gimple. */ 2290 #define RS6000_BTC_MISC_MASK 0x1f000000 /* Mask of the misc info. */ 2291 2292 /* Convenience macros to document the instruction type. */ 2293 #define RS6000_BTC_MEM RS6000_BTC_MISC /* load/store touches mem. */ 2294 #define RS6000_BTC_SAT RS6000_BTC_MISC /* saturate sets VSCR. */ 2295 2296 /* Builtin targets. For now, we reuse the masks for those options that are in 2297 target flags, and pick a random bit for ldbl128, which isn't in 2298 target_flags. */ 2299 #define RS6000_BTM_ALWAYS 0 /* Always enabled. */ 2300 #define RS6000_BTM_ALTIVEC MASK_ALTIVEC /* VMX/altivec vectors. */ 2301 #define RS6000_BTM_CMPB MASK_CMPB /* ISA 2.05: compare bytes. */ 2302 #define RS6000_BTM_VSX MASK_VSX /* VSX (vector/scalar). */ 2303 #define RS6000_BTM_P8_VECTOR MASK_P8_VECTOR /* ISA 2.07 vector. */ 2304 #define RS6000_BTM_P9_VECTOR MASK_P9_VECTOR /* ISA 3.0 vector. */ 2305 #define RS6000_BTM_P9_MISC MASK_P9_MISC /* ISA 3.0 misc. non-vector */ 2306 #define RS6000_BTM_CRYPTO MASK_CRYPTO /* crypto funcs. */ 2307 #define RS6000_BTM_HTM MASK_HTM /* hardware TM funcs. */ 2308 #define RS6000_BTM_FRE MASK_POPCNTB /* FRE instruction. */ 2309 #define RS6000_BTM_FRES MASK_PPC_GFXOPT /* FRES instruction. */ 2310 #define RS6000_BTM_FRSQRTE MASK_PPC_GFXOPT /* FRSQRTE instruction. */ 2311 #define RS6000_BTM_FRSQRTES MASK_POPCNTB /* FRSQRTES instruction. */ 2312 #define RS6000_BTM_POPCNTD MASK_POPCNTD /* Target supports ISA 2.06. */ 2313 #define RS6000_BTM_CELL MASK_FPRND /* Target is cell powerpc. */ 2314 #define RS6000_BTM_DFP MASK_DFP /* Decimal floating point. */ 2315 #define RS6000_BTM_HARD_FLOAT MASK_SOFT_FLOAT /* Hardware floating point. */ 2316 #define RS6000_BTM_LDBL128 MASK_MULTIPLE /* 128-bit long double. */ 2317 #define RS6000_BTM_64BIT MASK_64BIT /* 64-bit addressing. */ 2318 #define RS6000_BTM_POWERPC64 MASK_POWERPC64 /* 64-bit registers. */ 2319 #define RS6000_BTM_FLOAT128 MASK_FLOAT128_KEYWORD /* IEEE 128-bit float. */ 2320 #define RS6000_BTM_FLOAT128_HW MASK_FLOAT128_HW /* IEEE 128-bit float h/w. */ 2321 #define RS6000_BTM_MMA MASK_MMA /* ISA 3.1 MMA. */ 2322 #define RS6000_BTM_P10 MASK_POWER10 2323 2324 #define RS6000_BTM_COMMON (RS6000_BTM_ALTIVEC \ 2325 | RS6000_BTM_VSX \ 2326 | RS6000_BTM_P8_VECTOR \ 2327 | RS6000_BTM_P9_VECTOR \ 2328 | RS6000_BTM_P9_MISC \ 2329 | RS6000_BTM_MODULO \ 2330 | RS6000_BTM_CRYPTO \ 2331 | RS6000_BTM_FRE \ 2332 | RS6000_BTM_FRES \ 2333 | RS6000_BTM_FRSQRTE \ 2334 | RS6000_BTM_FRSQRTES \ 2335 | RS6000_BTM_HTM \ 2336 | RS6000_BTM_POPCNTD \ 2337 | RS6000_BTM_CELL \ 2338 | RS6000_BTM_DFP \ 2339 | RS6000_BTM_HARD_FLOAT \ 2340 | RS6000_BTM_LDBL128 \ 2341 | RS6000_BTM_POWERPC64 \ 2342 | RS6000_BTM_FLOAT128 \ 2343 | RS6000_BTM_FLOAT128_HW \ 2344 | RS6000_BTM_MMA \ 2345 | RS6000_BTM_P10) 2346 2347 /* Define builtin enum index. */ 2348 2349 #undef RS6000_BUILTIN_0 2350 #undef RS6000_BUILTIN_1 2351 #undef RS6000_BUILTIN_2 2352 #undef RS6000_BUILTIN_3 2353 #undef RS6000_BUILTIN_4 2354 #undef RS6000_BUILTIN_A 2355 #undef RS6000_BUILTIN_D 2356 #undef RS6000_BUILTIN_H 2357 #undef RS6000_BUILTIN_M 2358 #undef RS6000_BUILTIN_P 2359 #undef RS6000_BUILTIN_X 2360 2361 #define RS6000_BUILTIN_0(ENUM, NAME, MASK, ATTR, ICODE) ENUM, 2362 #define RS6000_BUILTIN_1(ENUM, NAME, MASK, ATTR, ICODE) ENUM, 2363 #define RS6000_BUILTIN_2(ENUM, NAME, MASK, ATTR, ICODE) ENUM, 2364 #define RS6000_BUILTIN_3(ENUM, NAME, MASK, ATTR, ICODE) ENUM, 2365 #define RS6000_BUILTIN_4(ENUM, NAME, MASK, ATTR, ICODE) ENUM, 2366 #define RS6000_BUILTIN_A(ENUM, NAME, MASK, ATTR, ICODE) ENUM, 2367 #define RS6000_BUILTIN_D(ENUM, NAME, MASK, ATTR, ICODE) ENUM, 2368 #define RS6000_BUILTIN_H(ENUM, NAME, MASK, ATTR, ICODE) ENUM, 2369 #define RS6000_BUILTIN_M(ENUM, NAME, MASK, ATTR, ICODE) ENUM, 2370 #define RS6000_BUILTIN_P(ENUM, NAME, MASK, ATTR, ICODE) ENUM, 2371 #define RS6000_BUILTIN_X(ENUM, NAME, MASK, ATTR, ICODE) ENUM, 2372 2373 enum rs6000_builtins 2374 { 2375 #include "rs6000-builtin.def" 2376 2377 RS6000_BUILTIN_COUNT 2378 }; 2379 2380 #undef RS6000_BUILTIN_0 2381 #undef RS6000_BUILTIN_1 2382 #undef RS6000_BUILTIN_2 2383 #undef RS6000_BUILTIN_3 2384 #undef RS6000_BUILTIN_4 2385 #undef RS6000_BUILTIN_A 2386 #undef RS6000_BUILTIN_D 2387 #undef RS6000_BUILTIN_H 2388 #undef RS6000_BUILTIN_M 2389 #undef RS6000_BUILTIN_P 2390 #undef RS6000_BUILTIN_X 2391 2392 /* Mappings for overloaded builtins. */ 2393 struct altivec_builtin_types 2394 { 2395 enum rs6000_builtins code; 2396 enum rs6000_builtins overloaded_code; 2397 signed char ret_type; 2398 signed char op1; 2399 signed char op2; 2400 signed char op3; 2401 }; 2402 extern const struct altivec_builtin_types altivec_overloaded_builtins[]; 2403 2404 enum rs6000_builtin_type_index 2405 { 2406 RS6000_BTI_NOT_OPAQUE, 2407 RS6000_BTI_opaque_V4SI, 2408 RS6000_BTI_V16QI, /* __vector signed char */ 2409 RS6000_BTI_V1TI, 2410 RS6000_BTI_V2DI, 2411 RS6000_BTI_V2DF, 2412 RS6000_BTI_V4HI, 2413 RS6000_BTI_V4SI, 2414 RS6000_BTI_V4SF, 2415 RS6000_BTI_V8HI, 2416 RS6000_BTI_unsigned_V16QI, /* __vector unsigned char */ 2417 RS6000_BTI_unsigned_V1TI, 2418 RS6000_BTI_unsigned_V8HI, 2419 RS6000_BTI_unsigned_V4SI, 2420 RS6000_BTI_unsigned_V2DI, 2421 RS6000_BTI_bool_char, /* __bool char */ 2422 RS6000_BTI_bool_short, /* __bool short */ 2423 RS6000_BTI_bool_int, /* __bool int */ 2424 RS6000_BTI_bool_long_long, /* __bool long long */ 2425 RS6000_BTI_pixel, /* __pixel (16 bits arranged as 4 2426 channels of 1, 5, 5, and 5 bits 2427 respectively as packed with the 2428 vpkpx insn. __pixel is only 2429 meaningful as a vector type. 2430 There is no corresponding scalar 2431 __pixel data type.) */ 2432 RS6000_BTI_bool_V16QI, /* __vector __bool char */ 2433 RS6000_BTI_bool_V8HI, /* __vector __bool short */ 2434 RS6000_BTI_bool_V4SI, /* __vector __bool int */ 2435 RS6000_BTI_bool_V2DI, /* __vector __bool long */ 2436 RS6000_BTI_bool_V1TI, /* __vector __bool 128-bit */ 2437 RS6000_BTI_pixel_V8HI, /* __vector __pixel */ 2438 RS6000_BTI_long, /* long_integer_type_node */ 2439 RS6000_BTI_unsigned_long, /* long_unsigned_type_node */ 2440 RS6000_BTI_long_long, /* long_long_integer_type_node */ 2441 RS6000_BTI_unsigned_long_long, /* long_long_unsigned_type_node */ 2442 RS6000_BTI_INTQI, /* (signed) intQI_type_node */ 2443 RS6000_BTI_UINTQI, /* unsigned_intQI_type_node */ 2444 RS6000_BTI_INTHI, /* intHI_type_node */ 2445 RS6000_BTI_UINTHI, /* unsigned_intHI_type_node */ 2446 RS6000_BTI_INTSI, /* intSI_type_node (signed) */ 2447 RS6000_BTI_UINTSI, /* unsigned_intSI_type_node */ 2448 RS6000_BTI_INTDI, /* intDI_type_node */ 2449 RS6000_BTI_UINTDI, /* unsigned_intDI_type_node */ 2450 RS6000_BTI_INTTI, /* intTI_type_node */ 2451 RS6000_BTI_UINTTI, /* unsigned_intTI_type_node */ 2452 RS6000_BTI_float, /* float_type_node */ 2453 RS6000_BTI_double, /* double_type_node */ 2454 RS6000_BTI_long_double, /* long_double_type_node */ 2455 RS6000_BTI_dfloat64, /* dfloat64_type_node */ 2456 RS6000_BTI_dfloat128, /* dfloat128_type_node */ 2457 RS6000_BTI_void, /* void_type_node */ 2458 RS6000_BTI_ieee128_float, /* ieee 128-bit floating point */ 2459 RS6000_BTI_ibm128_float, /* IBM 128-bit floating point */ 2460 RS6000_BTI_const_str, /* pointer to const char * */ 2461 RS6000_BTI_vector_pair, /* unsigned 256-bit types (vector pair). */ 2462 RS6000_BTI_vector_quad, /* unsigned 512-bit types (vector quad). */ 2463 RS6000_BTI_MAX 2464 }; 2465 2466 2467 #define opaque_V4SI_type_node (rs6000_builtin_types[RS6000_BTI_opaque_V4SI]) 2468 #define V16QI_type_node (rs6000_builtin_types[RS6000_BTI_V16QI]) 2469 #define V1TI_type_node (rs6000_builtin_types[RS6000_BTI_V1TI]) 2470 #define V2DI_type_node (rs6000_builtin_types[RS6000_BTI_V2DI]) 2471 #define V2DF_type_node (rs6000_builtin_types[RS6000_BTI_V2DF]) 2472 #define V4HI_type_node (rs6000_builtin_types[RS6000_BTI_V4HI]) 2473 #define V4SI_type_node (rs6000_builtin_types[RS6000_BTI_V4SI]) 2474 #define V4SF_type_node (rs6000_builtin_types[RS6000_BTI_V4SF]) 2475 #define V8HI_type_node (rs6000_builtin_types[RS6000_BTI_V8HI]) 2476 #define unsigned_V16QI_type_node (rs6000_builtin_types[RS6000_BTI_unsigned_V16QI]) 2477 #define unsigned_V1TI_type_node (rs6000_builtin_types[RS6000_BTI_unsigned_V1TI]) 2478 #define unsigned_V8HI_type_node (rs6000_builtin_types[RS6000_BTI_unsigned_V8HI]) 2479 #define unsigned_V4SI_type_node (rs6000_builtin_types[RS6000_BTI_unsigned_V4SI]) 2480 #define unsigned_V2DI_type_node (rs6000_builtin_types[RS6000_BTI_unsigned_V2DI]) 2481 #define bool_char_type_node (rs6000_builtin_types[RS6000_BTI_bool_char]) 2482 #define bool_short_type_node (rs6000_builtin_types[RS6000_BTI_bool_short]) 2483 #define bool_int_type_node (rs6000_builtin_types[RS6000_BTI_bool_int]) 2484 #define bool_long_long_type_node (rs6000_builtin_types[RS6000_BTI_bool_long_long]) 2485 #define pixel_type_node (rs6000_builtin_types[RS6000_BTI_pixel]) 2486 #define bool_V16QI_type_node (rs6000_builtin_types[RS6000_BTI_bool_V16QI]) 2487 #define bool_V8HI_type_node (rs6000_builtin_types[RS6000_BTI_bool_V8HI]) 2488 #define bool_V4SI_type_node (rs6000_builtin_types[RS6000_BTI_bool_V4SI]) 2489 #define bool_V2DI_type_node (rs6000_builtin_types[RS6000_BTI_bool_V2DI]) 2490 #define bool_V1TI_type_node (rs6000_builtin_types[RS6000_BTI_bool_V1TI]) 2491 #define pixel_V8HI_type_node (rs6000_builtin_types[RS6000_BTI_pixel_V8HI]) 2492 2493 #define long_long_integer_type_internal_node (rs6000_builtin_types[RS6000_BTI_long_long]) 2494 #define long_long_unsigned_type_internal_node (rs6000_builtin_types[RS6000_BTI_unsigned_long_long]) 2495 #define long_integer_type_internal_node (rs6000_builtin_types[RS6000_BTI_long]) 2496 #define long_unsigned_type_internal_node (rs6000_builtin_types[RS6000_BTI_unsigned_long]) 2497 #define intQI_type_internal_node (rs6000_builtin_types[RS6000_BTI_INTQI]) 2498 #define uintQI_type_internal_node (rs6000_builtin_types[RS6000_BTI_UINTQI]) 2499 #define intHI_type_internal_node (rs6000_builtin_types[RS6000_BTI_INTHI]) 2500 #define uintHI_type_internal_node (rs6000_builtin_types[RS6000_BTI_UINTHI]) 2501 #define intSI_type_internal_node (rs6000_builtin_types[RS6000_BTI_INTSI]) 2502 #define uintSI_type_internal_node (rs6000_builtin_types[RS6000_BTI_UINTSI]) 2503 #define intDI_type_internal_node (rs6000_builtin_types[RS6000_BTI_INTDI]) 2504 #define uintDI_type_internal_node (rs6000_builtin_types[RS6000_BTI_UINTDI]) 2505 #define intTI_type_internal_node (rs6000_builtin_types[RS6000_BTI_INTTI]) 2506 #define uintTI_type_internal_node (rs6000_builtin_types[RS6000_BTI_UINTTI]) 2507 #define float_type_internal_node (rs6000_builtin_types[RS6000_BTI_float]) 2508 #define double_type_internal_node (rs6000_builtin_types[RS6000_BTI_double]) 2509 #define long_double_type_internal_node (rs6000_builtin_types[RS6000_BTI_long_double]) 2510 #define dfloat64_type_internal_node (rs6000_builtin_types[RS6000_BTI_dfloat64]) 2511 #define dfloat128_type_internal_node (rs6000_builtin_types[RS6000_BTI_dfloat128]) 2512 #define void_type_internal_node (rs6000_builtin_types[RS6000_BTI_void]) 2513 #define ieee128_float_type_node (rs6000_builtin_types[RS6000_BTI_ieee128_float]) 2514 #define ibm128_float_type_node (rs6000_builtin_types[RS6000_BTI_ibm128_float]) 2515 #define const_str_type_node (rs6000_builtin_types[RS6000_BTI_const_str]) 2516 #define vector_pair_type_node (rs6000_builtin_types[RS6000_BTI_vector_pair]) 2517 #define vector_quad_type_node (rs6000_builtin_types[RS6000_BTI_vector_quad]) 2518 2519 extern GTY(()) tree rs6000_builtin_types[RS6000_BTI_MAX]; 2520 extern GTY(()) tree rs6000_builtin_decls[RS6000_BUILTIN_COUNT]; 2521 2522 #ifndef USED_FOR_TARGET 2523 extern GTY(()) tree builtin_mode_to_type[MAX_MACHINE_MODE][2]; 2524 extern GTY(()) tree altivec_builtin_mask_for_load; 2525 extern GTY(()) section *toc_section; 2526 2527 /* A C structure for machine-specific, per-function data. 2528 This is added to the cfun structure. */ 2529 typedef struct GTY(()) machine_function 2530 { 2531 /* Flags if __builtin_return_address (n) with n >= 1 was used. */ 2532 int ra_needs_full_frame; 2533 /* Flags if __builtin_return_address (0) was used. */ 2534 int ra_need_lr; 2535 /* Cache lr_save_p after expansion of builtin_eh_return. */ 2536 int lr_save_state; 2537 /* Whether we need to save the TOC to the reserved stack location in the 2538 function prologue. */ 2539 bool save_toc_in_prologue; 2540 /* Offset from virtual_stack_vars_rtx to the start of the ABI_V4 2541 varargs save area. */ 2542 HOST_WIDE_INT varargs_save_offset; 2543 /* Alternative internal arg pointer for -fsplit-stack. */ 2544 rtx split_stack_arg_pointer; 2545 bool split_stack_argp_used; 2546 /* Flag if r2 setup is needed with ELFv2 ABI. */ 2547 bool r2_setup_needed; 2548 /* The number of components we use for separate shrink-wrapping. */ 2549 int n_components; 2550 /* The components already handled by separate shrink-wrapping, which should 2551 not be considered by the prologue and epilogue. */ 2552 bool gpr_is_wrapped_separately[32]; 2553 bool fpr_is_wrapped_separately[32]; 2554 bool lr_is_wrapped_separately; 2555 bool toc_is_wrapped_separately; 2556 bool mma_return_type_error; 2557 } machine_function; 2558 #endif 2559 2560 2561 #define TARGET_SUPPORTS_WIDE_INT 1 2562 2563 #if (GCC_VERSION >= 3000) 2564 #pragma GCC poison TARGET_FLOAT128 OPTION_MASK_FLOAT128 MASK_FLOAT128 2565 #endif 2566 2567 /* Whether a given VALUE is a valid 16 or 34-bit signed integer. */ 2568 #define SIGNED_INTEGER_NBIT_P(VALUE, N) \ 2569 IN_RANGE ((VALUE), \ 2570 -(HOST_WIDE_INT_1 << ((N)-1)), \ 2571 (HOST_WIDE_INT_1 << ((N)-1)) - 1) 2572 2573 #define SIGNED_INTEGER_16BIT_P(VALUE) SIGNED_INTEGER_NBIT_P (VALUE, 16) 2574 #define SIGNED_INTEGER_34BIT_P(VALUE) SIGNED_INTEGER_NBIT_P (VALUE, 34) 2575 2576 /* Like SIGNED_INTEGER_16BIT_P and SIGNED_INTEGER_34BIT_P, but with an extra 2577 argument that gives a length to validate a range of addresses, to allow for 2578 splitting insns into several insns, each of which has an offsettable 2579 address. */ 2580 #define SIGNED_16BIT_OFFSET_EXTRA_P(VALUE, EXTRA) \ 2581 IN_RANGE ((VALUE), \ 2582 -(HOST_WIDE_INT_1 << 15), \ 2583 (HOST_WIDE_INT_1 << 15) - 1 - (EXTRA)) 2584 2585 #define SIGNED_34BIT_OFFSET_EXTRA_P(VALUE, EXTRA) \ 2586 IN_RANGE ((VALUE), \ 2587 -(HOST_WIDE_INT_1 << 33), \ 2588 (HOST_WIDE_INT_1 << 33) - 1 - (EXTRA)) 2589 2590 /* Define this if some processing needs to be done before outputting the 2591 assembler code. On the PowerPC, we remember if the current insn is a normal 2592 prefixed insn where we need to emit a 'p' before the insn. */ 2593 #define FINAL_PRESCAN_INSN(INSN, OPERANDS, NOPERANDS) \ 2594 do \ 2595 { \ 2596 if (TARGET_PREFIXED) \ 2597 rs6000_final_prescan_insn (INSN, OPERANDS, NOPERANDS); \ 2598 } \ 2599 while (0) 2600 2601 /* Do anything special before emitting an opcode. We use it to emit a 'p' for 2602 prefixed insns that is set in FINAL_PRESCAN_INSN. */ 2603 #define ASM_OUTPUT_OPCODE(STREAM, OPCODE) \ 2604 do \ 2605 { \ 2606 if (TARGET_PREFIXED) \ 2607 rs6000_asm_output_opcode (STREAM); \ 2608 } \ 2609 while (0) 2610