1# Top level -*- makefile -*- fragment for libgccjit.so.
2#   Copyright (C) 2013-2019 Free Software Foundation, Inc.
3
4#This file is part of GCC.
5
6#GCC is free software; you can redistribute it and/or modify
7#it under the terms of the GNU General Public License as published by
8#the Free Software Foundation; either version 3, or (at your option)
9#any later version.
10
11#GCC is distributed in the hope that it will be useful,
12#but WITHOUT ANY WARRANTY; without even the implied warranty of
13#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14#GNU General Public License for more details.
15
16# You should have received a copy of the GNU General Public License
17# along with GCC; see the file COPYING3.  If not see
18# <http://www.gnu.org/licenses/>.
19
20# This file provides the language dependent support in the main Makefile.
21# Each language makefile fragment must provide the following targets:
22#
23# foo.all.cross, foo.start.encap, foo.rest.encap,
24# foo.install-common, foo.install-man, foo.install-info, foo.install-pdf,
25# foo.install-html, foo.info, foo.dvi, foo.pdf, foo.html, foo.uninstall,
26# foo.mostlyclean, foo.clean, foo.distclean,
27# foo.maintainer-clean, foo.stage1, foo.stage2, foo.stage3, foo.stage4
28#
29# where `foo' is the name of the language.
30#
31# It should also provide rules for:
32#
33# - making any compiler driver (eg: g++)
34# - the compiler proper (eg: cc1plus)
35# - define the names for selecting the language in LANGUAGES.
36
37#
38# Define the names for selecting jit in LANGUAGES.
39# Note that it would be nice to move the dependency on g++
40# into the jit rule, but that needs a little bit of work
41# to do the right thing within all.cross.
42
43LIBGCCJIT_LINKER_NAME = libgccjit.so
44LIBGCCJIT_VERSION_NUM = 0
45LIBGCCJIT_MINOR_NUM = 0
46LIBGCCJIT_RELEASE_NUM = 1
47LIBGCCJIT_SONAME = $(LIBGCCJIT_LINKER_NAME).$(LIBGCCJIT_VERSION_NUM)
48LIBGCCJIT_FILENAME = \
49  $(LIBGCCJIT_SONAME).$(LIBGCCJIT_MINOR_NUM).$(LIBGCCJIT_RELEASE_NUM)
50
51LIBGCCJIT_LINKER_NAME_SYMLINK = $(LIBGCCJIT_LINKER_NAME)
52LIBGCCJIT_SONAME_SYMLINK = $(LIBGCCJIT_SONAME)
53
54# Conditionalize the use of the LD_VERSION_SCRIPT_OPTION and
55# LD_SONAME_OPTION depending if configure found them, using $(if)
56# We have to define a COMMA here, otherwise the commas in the "true"
57# result are treated as separators by the $(if).
58COMMA := ,
59LIBGCCJIT_VERSION_SCRIPT_OPTION = \
60	$(if $(LD_VERSION_SCRIPT_OPTION),\
61	  -Wl$(COMMA)$(LD_VERSION_SCRIPT_OPTION)$(COMMA)$(srcdir)/jit/libgccjit.map)
62
63LIBGCCJIT_SONAME_OPTION = \
64	$(if $(LD_SONAME_OPTION), \
65	     -Wl$(COMMA)$(LD_SONAME_OPTION)$(COMMA)$(LIBGCCJIT_SONAME))
66
67jit: $(LIBGCCJIT_FILENAME) \
68	$(LIBGCCJIT_SYMLINK) \
69	$(LIBGCCJIT_LINKER_NAME_SYMLINK) \
70	$(FULL_DRIVER_NAME)
71
72# Tell GNU make to ignore these if they exist.
73.PHONY: jit
74
75jit_OBJS = attribs.o \
76	jit/dummy-frontend.o \
77	jit/libgccjit.o \
78	jit/jit-logging.o \
79	jit/jit-recording.o \
80	jit/jit-playback.o \
81	jit/jit-result.o \
82	jit/jit-tempdir.o \
83	jit/jit-builtins.o \
84	jit/jit-spec.o \
85	gcc.o
86
87# Use strict warnings for this front end.
88jit-warn = $(STRICT_WARN)
89
90# We avoid using $(BACKEND) from Makefile.in in order to avoid pulling
91# in main.o
92$(LIBGCCJIT_FILENAME): $(jit_OBJS) \
93	libbackend.a libcommon-target.a libcommon.a \
94	$(CPPLIB) $(LIBDECNUMBER) \
95	$(LIBDEPS) $(srcdir)/jit/libgccjit.map \
96	$(EXTRA_GCC_OBJS)
97	+$(LLINKER) $(ALL_LINKERFLAGS) $(LDFLAGS) -o $@ -shared \
98	     $(jit_OBJS) libbackend.a libcommon-target.a libcommon.a \
99	     $(CPPLIB) $(LIBDECNUMBER) $(EXTRA_GCC_LIBS) $(LIBS) $(BACKENDLIBS) \
100	     $(EXTRA_GCC_OBJS) \
101	     $(LIBGCCJIT_VERSION_SCRIPT_OPTION) \
102	     $(LIBGCCJIT_SONAME_OPTION)
103
104$(LIBGCCJIT_SONAME_SYMLINK): $(LIBGCCJIT_FILENAME)
105	ln -sf $(LIBGCCJIT_FILENAME) $(LIBGCCJIT_SONAME_SYMLINK)
106
107$(LIBGCCJIT_LINKER_NAME_SYMLINK): $(LIBGCCJIT_SONAME_SYMLINK)
108	ln -sf $(LIBGCCJIT_SONAME_SYMLINK) $(LIBGCCJIT_LINKER_NAME_SYMLINK)
109
110#
111# Build hooks:
112
113jit.all.cross:
114jit.start.encap:
115jit.rest.encap:
116
117# Documentation build hooks.
118#
119# The documentation can be built using the texinfo toolchain, or
120# the sphinx toolchain
121#
122# The jit documentation is authored using Sphinx, which has numerous
123# advantages over Texinfo, including:
124#
125#   * much faster
126#
127#   * use of CSS and JS to provide less of a 1990s feel in the generated
128#     HTML.
129#
130#   * sane, stable HTML page and anchor names
131#
132#   * sane HTML navigation: ability to move forward and back in the HTML
133#     at every node to read the HTML like a book
134#
135#   * syntax-coloring of examples
136#
137#   * the ability to "include" fragments of code inline.  This is used
138#     heavily by the jit docs, so that the example code is shared by both
139#     the test suite and the documentation to ensure that the examples
140#     appearing in the docs actually compile and work
141#
142# Sphinx is not a "blessed" dependency, and so a prebuilt libgccjit.texinfo
143# file built by Sphinx is checked into the source tree to avoid requiring
144# everyone to have Sphinx installed.
145#
146# This prebuilt libgccjit.texinfo has the "include" fragments "baked in",
147# and so contains the content from the sphinx toolchain, but lacks the
148# syntax-coloring, and the generated HTML is (IMHO) greatly inferior to
149# that generated by Sphinx.
150
151# These targets redirect HTML creation and installation to either
152# jit.sphinx.(install-)html or jit.texinfo.(install-)html.
153jit.html: jit.$(doc_build_sys).html
154jit.install-html: jit.$(doc_build_sys).install-html
155
156# For now, use texinfo for pdf, since the sphinx latex toolchain currently
157# fails for me deep inside pdflatex (see notes below)
158jit.pdf: jit.texinfo.pdf
159jit.install-pdf: jit.texinfo.install-pdf
160
161# Hooks for building docs using texinfo
162JIT_TEXI_FILES = $(srcdir)/jit/docs/_build/texinfo/libgccjit.texi
163
164jit.info: doc/libgccjit.info
165doc/libgccjit.info: $(JIT_TEXI_FILES)
166	if test "x$(BUILD_INFO)" = xinfo; then \
167	  rm -f doc/libgccjit.info*; \
168	  $(MAKEINFO) $(MAKEINFOFLAGS) -I $(gcc_docdir) \
169		-I $(gcc_docdir)/include -o $@ $<; \
170	else true; fi
171
172jit.install-info: $(DESTDIR)$(infodir)/libgccjit.info
173
174jit.dvi: doc/libgccjit.dvi
175doc/libgccjit.dvi: $(JIT_TEXI_FILES)
176	$(TEXI2DVI) -I $(abs_docdir) -I $(abs_docdir)/include -o $@ $<
177
178jit.texinfo.html: $(build_htmldir)/jit/index.html
179
180$(build_htmldir)/jit/index.html: $(srcdir)/jit/docs/_build/texinfo/libgccjit.texi
181	$(mkinstalldirs) $(@D)
182	rm -f $(@D)/*
183	$(TEXI2HTML) -I $(gcc_docdir)/include -I $(srcdir)/jit -o $(@D) $<
184
185jit.texinfo.install-html: jit.texinfo.html
186	@$(NORMAL_INSTALL)
187	test -z "$(htmldir)" || $(mkinstalldirs) "$(DESTDIR)$(htmldir)"
188	@for p in $(build_htmldir)/jit; do \
189	  if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
190	  f=$(html__strip_dir) \
191	  if test -d "$$d$$p"; then \
192	    echo " $(mkinstalldirs) '$(DESTDIR)$(htmldir)/$$f'"; \
193	    $(mkinstalldirs) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
194	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
195	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
196	  else \
197	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
198	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
199	  fi; \
200	done
201
202jit.texinfo.pdf: doc/libgccjit.pdf
203
204doc/libgccjit.pdf: $(JIT_TEXI_FILES)
205	$(TEXI2PDF) -I $(abs_docdir) -I $(abs_docdir)/include -o $@ $<
206
207jit.texinfo.install-pdf: doc/libgccjit.pdf
208	@$(NORMAL_INSTALL)
209	test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)/gcc"
210	@for p in doc/libgccjit.pdf; do \
211	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
212	  f=$(pdf__strip_dir) \
213	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/gcc/$$f'"; \
214	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/gcc/$$f"; \
215	done
216
217# Hooks for building docs using the Sphinx toolchain:
218
219SPHINX_BUILD_DIR=jit/sphinx-build
220
221jit.sphinx.html:
222	mkdir -p $(SPHINX_BUILD_DIR)
223	(cd $(srcdir)/jit/docs && \
224	  make html BUILDDIR=$(PWD)/$(SPHINX_BUILD_DIR) )
225
226jit_htmldir=$(htmldir)/jit
227
228jit.sphinx.install-html: jit.sphinx.html
229	@$(NORMAL_INSTALL)
230	test -z "$(jit_htmldir)" || $(mkinstalldirs) "$(DESTDIR)$(jit_htmldir)"
231	@for f in $(shell cd $(SPHINX_BUILD_DIR)/html && find) ; do \
232	  if test -f $(SPHINX_BUILD_DIR)/html/"$$f"; then \
233	     $(INSTALL_DATA) $(SPHINX_BUILD_DIR)/html/"$$f" $(DESTDIR)$(jit_htmldir)/"$$f"; \
234	  else \
235	     mkdir $(DESTDIR)$(jit_htmldir)/"$$f"; \
236	  fi; \
237	done
238
239# (This one is currently failing deep inside pdflatex for me;
240# see https://bugzilla.redhat.com/show_bug.cgi?id=1148845 )
241jit.sphinx.pdf: $(SPHINX_BUILD_DIR)/latex/libgccjit.pdf
242$(SPHINX_BUILD_DIR)/latex/libgccjit.pdf:
243	mkdir -p $(SPHINX_BUILD_DIR)
244	(cd $(srcdir)/jit/docs && \
245	  make latexpdf BUILDDIR=$(PWD)/$(SPHINX_BUILD_DIR) )
246
247jit.sphinx.install-pdf: $(SPHINX_BUILD_DIR)/latex/libgccjit.pdf
248	@$(NORMAL_INSTALL)
249	test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)/gcc"
250	@for p in $(SPHINX_BUILD_DIR)/latex/libgccjit.pdf; do \
251	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
252	  f=$(pdf__strip_dir) \
253	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/gcc/$$f'"; \
254	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/gcc/$$f"; \
255	done
256
257jit.srcinfo:
258jit.srcextra:
259
260jit.tags:
261
262jit.man:
263
264jit.srcman:
265
266lang_checks += check-jit
267lang_checks_parallelized += check-jit
268# This number is somewhat arbitrary.  Two tests are much slower
269# than all the others (test-combination.c and test-threads.c) so
270# we want them to be placed in different "buckets".
271check_jit_parallelize = 10
272
273# No jit-specific selftests
274selftest-jit:
275
276#
277# Install hooks:
278jit.install-common: installdirs
279	$(INSTALL_PROGRAM) $(LIBGCCJIT_FILENAME) \
280	  $(DESTDIR)/$(libdir)/$(LIBGCCJIT_FILENAME)
281	ln -sf \
282	  $(LIBGCCJIT_FILENAME) \
283	  $(DESTDIR)/$(libdir)/$(LIBGCCJIT_SONAME_SYMLINK)
284	ln -sf \
285	  $(LIBGCCJIT_SONAME_SYMLINK)\
286	  $(DESTDIR)/$(libdir)/$(LIBGCCJIT_LINKER_NAME_SYMLINK)
287	$(INSTALL_DATA) $(srcdir)/jit/libgccjit.h \
288	  $(DESTDIR)/$(includedir)/libgccjit.h
289	$(INSTALL_DATA) $(srcdir)/jit/libgccjit++.h \
290	  $(DESTDIR)/$(includedir)/libgccjit++.h
291
292jit.install-man:
293
294jit.install-plugin:
295
296jit.uninstall:
297
298#
299# Clean hooks:
300# A lot of the ancillary files are deleted by the main makefile.
301# We just have to delete files specific to us.
302
303jit.mostlyclean:
304	-rm -f $(LIBGCCJIT_FILENAME) $(LIBGCCJIT_SYMLINK)
305	-rm -f $(LIBGCCJIT_LINKER_NAME_SYMLINK) $(FULL_DRIVER_NAME)
306	-rm -f $(LIBGCCJIT_SONAME)
307	-rm -f $(jit_OBJS)
308
309jit.clean:
310
311jit.distclean:
312
313jit.maintainer-clean:
314
315#
316# Stage hooks:
317# The main makefile has already created stage?/jit.
318
319jit.stage1: stage1-start
320	-mv jit/*$(objext) stage1/jit
321jit.stage2: stage2-start
322	-mv jit/*$(objext) stage2/jit
323jit.stage3: stage3-start
324	-mv jit/*$(objext) stage3/jit
325jit.stage4: stage4-start
326	-mv jit/*$(objext) stage4/jit
327jit.stageprofile: stageprofile-start
328	-mv jit/*$(objext) stageprofile/jit
329jit.stagefeedback: stagefeedback-start
330	-mv jit/*$(objext) stagefeedback/jit
331