1Tcl UNIX README 2--------------- 3 4This is the directory where you configure, compile, test, and install UNIX 5versions of Tcl. This directory also contains source files for Tcl that are 6specific to UNIX. Some of the files in this directory are used on the PC or 7MacOSX platform too, but they all depend on UNIX (POSIX/ANSI C) interfaces and 8some of them only make sense under UNIX. 9 10Updated forms of the information found in this file is available at: 11 https://www.tcl-tk.org/doc/howto/compile.html#unix 12 13For information on platforms where Tcl is known to compile, along with any 14porting notes for getting it to work on those platforms, see: 15 https://www.tcl-tk.org/software/tcltk/platforms.html 16 17The rest of this file contains instructions on how to do this. The release 18should compile and run either "out of the box" or with trivial changes on any 19UNIX-like system that approximates POSIX, BSD, or System V. We know that it 20runs on workstations from Sun, H-P, DEC, IBM, and SGI, as well as PCs running 21Linux, BSDI, and SCO UNIX. To compile for a PC running Windows, see the README 22file in the directory ../win. To compile for MacOSX, see the README file in 23the directory ../macosx. 24 25How To Compile And Install Tcl: 26------------------------------- 27 28(a) If you have already compiled Tcl once in this directory and are now 29 preparing to compile again in the same directory but for a different 30 platform, or if you have applied patches, type "make distclean" to discard 31 all the configuration information computed previously. 32 33(b) If you need to reconfigure because you changed any of the .in or .m4 34 files, you will need to run autoconf to create a new ./configure script. 35 Most users will NOT need to do this since a configure script is already 36 provided. 37 38 (in the tcl/unix directory) 39 autoconf 40 41(c) Type "./configure". This runs a configuration script created by GNU 42 autoconf, which configures Tcl for your system and creates a Makefile. The 43 configure script allows you to customize the Tcl configuration for your 44 site; for details on how you can do this, type "./configure --help" or 45 refer to the autoconf documentation (not included here). Tcl's "configure" 46 supports the following special switches in addition to the standard ones: 47 48 --enable-threads If this switch is set, Tcl will compile itself 49 with multithreading support. 50 --disable-load If this switch is specified then Tcl will 51 configure itself not to allow dynamic loading, 52 even if your system appears to support it. 53 Normally you can leave this switch out and Tcl 54 will build itself for dynamic loading if your 55 system supports it. 56 --disable-dll-unloading Disables support for the [unload] command even 57 on platforms that can support it. Meaningless 58 when Tcl is compiled with --disable-load. 59 --enable-shared If this switch is specified, Tcl will compile 60 itself as a shared library if it can figure 61 out how to do that on this platform. This is 62 the default on platforms where we know how to 63 build shared libraries. 64 --disable-shared If this switch is specified, Tcl will compile 65 itself as a static library. 66 --enable-symbols Build with debugging symbols. By default 67 standard debugging symbols are used. You can 68 specify the value "mem" to include 69 TCL_MEM_DEBUG memory debugging, "compile" to 70 include TCL_COMPILE_DEBUG debugging, or "all" 71 to enable all internal debugging. 72 --disable-symbols Build without debugging symbols 73 --enable-64bit Enable 64bit support (where applicable) 74 --disable-64bit Disable 64bit support (where applicable) 75 --enable-64bit-vis Enable 64bit Sparc VIS support 76 --disable-64bit-vis Disable 64bit Sparc VIS support 77 --enable-langinfo Allows use of modern nl_langinfo check for 78 better localization support. This is on by 79 default on platforms where nl_langinfo is 80 found. 81 --disable-langinfo Specifically disables use of nl_langinfo. 82 --enable-man-symlinks Use symlinks for linking the manpages that 83 should be reachable under several names. 84 --enable-man-suffix[=STRING] 85 Append STRING to the names of installed manual 86 pages (prior to applying compression, if that 87 is also enabled). If STRING is omitted, 88 defaults to 'tcl'. 89 --enable-man-compression=PROG 90 Compress the manpages using PROG. 91 --enable-dtrace Enable tcl DTrace provider (if DTrace is 92 available on the platform), c.f. tclDTrace.d 93 for descriptions of the probes made available, 94 see https://wiki.tcl-lang.org/page/DTrace for more details 95 --with-encoding=ENCODING Specifies the encoding for compile-time 96 configuration values. Defaults to iso8859-1, 97 which is also sufficient for ASCII. 98 --with-tzdata=FLAG Specifies whether to install timezone data. By 99 default, the configure script tries to detect 100 whether a usable timezone database is present 101 on the system already. 102 103 Mac OS X only (i.e. completely unsupported on other platforms): 104 105 --enable-framework Package Tcl as a framework. 106 --disable-corefoundation Disable use of CoreFoundation API and revert 107 to standard select based notifier, required 108 when using naked fork (i.e. not followed by 109 execve). 110 111 Note: by default gcc will be used if it can be located on the PATH. If you 112 want to use cc instead of gcc, set the CC environment variable to "cc" 113 before running configure. It is not safe to edit the Makefile to use gcc 114 after configure is run. Also note that you should use the same compiler 115 when building extensions. 116 117 Note: be sure to use only absolute path names (those starting with "/") in 118 the --prefix and --exec-prefix options. 119 120(d) Type "make". This will create a library archive called "libtcl<version>.a" 121 or "libtcl<version>.so" and an interpreter application called "tclsh" that 122 allows you to type Tcl commands interactively or execute script files. It 123 will also create a stub library archive "libtclstub<version>.a" that 124 developers may link against other C code to produce loadable extensions 125 for Tcl. 126 127(e) If the make fails then you'll have to personalize the Makefile for your 128 site or possibly modify the distribution in other ways. First check the 129 porting Web page above to see if there are hints for compiling on your 130 system. If you need to modify Makefile, there are comments at the 131 beginning of it that describe the things you might want to change and how 132 to change them. 133 134(f) Type "make install" to install Tcl binaries and script files in standard 135 places. You'll need write permission on the installation directories to do 136 this. The installation directories are determined by the "configure" 137 script and may be specified with the standard --prefix and --exec-prefix 138 options to "configure". See the Makefile for information on what 139 directories were chosen; you can override these choices by modifying the 140 "prefix" and "exec_prefix" variables in the Makefile. The installed 141 binaries have embedded within them path values relative to the install 142 directory. If you change your mind about where Tcl should be installed, 143 start this procedure over again from step (a) so that the path embedded in 144 the binaries agrees with the install location. 145 146(g) At this point you can play with Tcl by running the installed "tclsh" 147 executable, or via the "make shell" target, and typing Tcl commands at the 148 interactive prompt. 149 150If you have trouble compiling Tcl, see the URL noted above about working 151platforms. It contains information that people have provided about changes 152they had to make to compile Tcl in various environments. We're also interested 153in hearing how to change the configuration setup so that Tcl compiles on 154additional platforms "out of the box". 155 156Test suite 157---------- 158 159There is a relatively complete test suite for all of the Tcl core in the 160subdirectory "tests". To use it just type "make test" in this directory. You 161should then see a printout of the test files processed. If any errors occur, 162you'll see a much more substantial printout for each error. See the README 163file in the "tests" directory for more information on the test suite. Note: 164don't run the tests as superuser: this will cause several of them to fail. If 165a test is failing consistently, please send us a bug report with as much 166detail as you can manage to our tracker: 167 168 https://core.tcl-lang.org/tcl/reportlist 169 170